WELD MOUNT fastening system

The fastener that sticks WELD MOUNT fastening system TITGEMEYER Tb1695GB(0918)2

All rights reserved. All technical data, performance descriptions, recoendations and guidelines contained in this catalogue and relating e.g. to the installation of parts that we supply, are non-binding. They are based on our experience. No legal claims or entitlements may be derived whatsoever from the contents of this brochure as the uses to which our products are put are frequently beyond our control. Moreover, the user is obliged at all times to check each individual use and decide whether the components that we supply can be used as needed. This catalogue is our intellectual property! It may not be disclosed to third parties. The catalogue itself may not be reprinted not even in part and none of our illustrations or TITGEMEYER order number systems may be used without our express written consent. Subject to change. All deliveries are made subject to our Terms of Delivery and Payment. Gebr. TITGEMEYER GmbH & Co. KG Osnabrück 2 L Phone: +49 (0)5 41/58 22-0 Fax: +49 (0)5 41/58 22-99 00 E-Mail: vertrieb@titgemeyer.de Tb1695GB(0918)2

Contents WELD MOUNT Fastening system Benefits at a glance... 4 WELD MOUNT fasteners A4 stainless steel threaded studs... 7 A4 threaded standoffs... 8 A4 steel floating nut plates... 8 Hose and cable clamps... 8 Small wire tie mounts AT-3 white or AT-3 black... 9 Wire tie mounts AT-5 white or AT-5 black... 9 Swivel base wire tie mounts AT-7 aluminium... 9 Wire tie mounts AT-9 aluminium... 10 Nylon strap mounts... 10 WELD MOUNT adhesives Acrylic adhesive AT-2010... 11 AT-8040 No Slide Multi Bonder... 11 WELD MOUNT accessories Köratool PM 207... 12 Köratool mixing tip... 12 Tb1695GB(0918)2 L Phone: +49 (0)5 41/58 22-0 Fax: +49 (0)5 41/58 22-99 00 E-Mail: vertrieb@titgemeyer.de 3

WELD MOUNT fastening system The fastener that sticks: the WELD MOUNT system The WELD MOUNT system is a unique combination of fasteners and adhesives that enables virtually any material to be fastened without the need for any welding, drilling, riveting or tapping. The system comprises wire tie mounts, hose and cable clamps, floating nut plates as well as other fasteners. Every element can be affixed vertically or overhead using the innovative adhesives. The AT-2010 and AT-8040 adhesives reach their high tensile strength in a mere 20 to 30 minutes. The WELD MOUNT system can be readily and easily used with no extensive training required, thus saving on the high costs associated with welding, drilling, riveting or tapping. 4 L Phone: +49 (0)5 41/58 22-0 Fax: +49 (0)5 41/58 22-99 00 E-Mail: vertrieb@titgemeyer.de Tb1695GB(0918)2

WELD MOUNT fastening system Benefits of the WELD MOUNT system Installation process Benefits for composite materials No drilling of composites: this eliminates the risk of moisture penetrating the core. No spacers required during installation: less weight and lower production costs as a result. No inadvertent drilling damage: no expensive repairs or delays as a result. Neat and clean installation: ideal for subsequent changes or additions. Can also be used in places that are very awkward to reach for personnel or with tools. Insert the 2-component cartridge into the PM 207 dispensing gun and attach the Köratool mixing tip. Benefits for metal and industrial applications WELD MOUNT offers significant advantages compared to welding: No prep work, no checking, and no waiting around for permits. Lower production costs. No safety inspections or fire safety regulations. No noxious vapours or gas ventilation issues unlike with welding. No warpage, no discolouration of components and consequ ently no costs for subsequent grinding, polishing or pickling. WELD MOUNT offers significant advantages compared to drilling and tapping: Handling: no need to install magnetic drilling equipment in awkward locations or on overhead surfaces. Time savings: drilling and tapping into hard substrates is both labour-intensive and time-consuming. Safety: drilling and tapping into tanks or cladding can result in leakages. Reduced costs: WELD MOUNT lowers the cost of tools and consumables. All tensile and shear strength data were calculated under pre-determined test conditions and are therefore for reference purposes only. Please contact our application consultants for all questions concerning specific applications. Clean the surface and the WELD MOUNT fastener using Scotchbrite and a solvent-based cleaner. Apply a small amount of adhesive to the underside of the WELD MOUNT fastener. Press the fastener firmly onto the substrate until the adhesive oozes out to the side. Depending on the chosen adhesive, the fastener will be ready for use within 15-45 minutes. Tb1695GB(0918)2 L Phone: +49 (0)5 41/58 22-0 Fax: +49 (0)5 41/58 22-99 00 E-Mail: vertrieb@titgemeyer.de 5

WELD MOUNT applications Cushion clamps and studs Metal bonding Rough fibreglass surfaces Installation accessories Air ducts and vents 6 L Battery cables Cable assemblies on tanks and cranes Mounting on powder-coated surfaces Mounting on hydraulic lines Phone: +49 (0)5 41/58 22-0 Fax: +49 (0)5 41/58 22-99 00 E-Mail: vertrieb@titgemeyer.de Tb1695GB(0918)2

WELD MOUNT fasteners A4-stainless steel threaded studs A4 stainless steel threaded studs can be used in a broad range of applications. Dash panels, consoles, electrical panels, and anchoring cushion clamps are just some of the most popular applications. The diameter of the base plate is sized to the anticipated loads. The base plate can be bonded to the top side or the underside. Thread size Shank Head Tensile strength Shear Torque Nm Description Art. No. M4 12 15,5 136 170 n/a 100 PS16-M407-12 6 873 017 000 20 15,5 136 170 n/a 100 PS16-M407-20 6 873 019 000 25 15,5 136 170 n/a 100 PS16-M407-25 6 873 021 000 35 15,5 136 170 n/a 100 PS16-M407-35 6 873 023 000 40 15,5 136 170 n/a 100 PS16-M407-40 6 873 025 000 50 15,5 136 170 n/a 100 PS16-M407-50 6 873 027 000 M5 15 32 225 295 6,7 100 ST32-M508-15 6 873 029 000 20 32 225 295 6,7 100 ST32-M508-20 6 873 031 000 25 32 225 295 6,7 100 ST32-M508-25 6 873 033 000 35 32 225 295 6,7 100 ST32-M508-35 6 873 035 000 40 32 225 295 6,7 100 ST32-M508-40 6 873 037 000 50 32 225 295 6,7 100 ST32-M508-50 6 873 039 000 M6 15 32 225 295 10 100 ST32-M610-15 6 873 041 000 20 32 225 295 10 100 ST32-M610-20 6 873 043 000 25 32 225 295 10 100 ST32-M610-25 6 873 045 000 35 32 225 295 10 100 ST32-M610-35 6 873 047 000 40 32 225 295 10 100 ST32-M610-40 6 873 049 000 50 32 225 295 10 100 ST32-M610-50 6 873 051 000 M8 30 50 544 680 n/a 25 HS50-M8125-30 6 873 053 000 40 50 544 680 n/a 25 HS50-M8125-30 6 873 055 000 M10 30 50 544 680 n/a 25 HS50-1015-30 6 873 057 000 40 50 544 680 n/a 25 HS50-1015-40 6 873 059 000 Tb1695GB(0918)2 L Phone: +49 (0)5 41/58 22-0 Fax: +49 (0)5 41/58 22-99 00 E-Mail: vertrieb@titgemeyer.de 7

WELD MOUNT fasteners A4 threaded standoffs Stainless steel threaded standoffs can be mounted on virtually any substrate surface. As with the threaded studs, these standoffs can also be bonded to the top or underside, in this case together with a cap. They are used to mount components on decks or wherever a sturdy female thread is required. Thread size Cap length Head Tensile strength Shear Torque Nm Description Art. No. M5 20 32 225 295 10 100 SOB32-M508-206 873 061 000 M6 20 32 225 295 10 100 SOB32-M610-206 873 063 000 M8 20 32 225 295 10 100 SOB32-M8125-206 873 065 000 A4 steel floating nut plates Floating nut plates are designed for through-hole and blind installation applications. The rubber fixture holds the floating nut plate in place while it is being affixed with acrylic adhesive and protects the thread during the installation process. To continue the installation work, simply remove the rubber strip. Thread size Exterior dimensions Description Art. No. M4 10 x 15 100 FN-M4-6 873 067 000 M5 11 x 18 100 FN-M5-6 873 069 000 M6 13 x 20 100 FN-M6-6 873 071 000 Hose and cable clamps Weld Mount clamps are mounted using our M6 thread. The clamps are made of black polypropylene and offer a temperature resistance range of between -30 C and +90 C during continuous operation. Clamp diameter Accompanying threaded stud Description Art. No. 12,4 ST32-M508-356 25 SCH-500 873 073 000 18,8 ST32-M508-506 25 SCH-750 873 075 000 8 L Phone: +49 (0)5 41/58 22-0 Fax: +49 (0)5 41/58 22-99 00 E-Mail: vertrieb@titgemeyer.de Tb1695GB(0918)2

WELD MOUNT fasteners Small wire tie mounts AT-3 white or AT-3 black Small wire tie mount, ideal for bonding to lighting installation panels and cable fasteners. This fastener is designed to be used with wire ties. Basic dim. Wire tie width Pull strength Colour Description Art. No. 11 x 11 5 22 100 White AT-3 white 873 001 000 11 x 11 5 22 100 Black AT-3 black 873 003 000 Wire tie mounts AT-5 white or AT-5 black Like their AT-3 counterpart, AT-5 wire tie mounts can also be easily and securely mounted using one of our adhesives. The AT-5 can also be used in conjunction with wire ties, just like the AT-3. The fastener is approved for underwater applications. Eliminates drilling, tapping and welding. Basic dim. Wire tie width Pull strength Colour Description Art. No. 19 x 29 8,5 68 100 White AT-5 white 873 005 000 19 x 29 8,5 68 100 Black AT-5 black 873 007 000 Swivel base wire tie mounts AT-7 aluminium This fastener comes with an anodised aluminium based and nylon wire tie mount. The mount swivels freely and makes it easier to align the wiring harness. Basic dim. ø Wire tie width Pull strength Colour Description Art. No. 22 8,5 68 50 Nylon Al natural AT-7 Al. swivel 873 009 000 Tb1695GB(0918)2 L Phone: +49 (0)5 41/58 22-0 Fax: +49 (0)5 41/58 22-99 00 E-Mail: vertrieb@titgemeyer.de 9

WELD MOUNT fasteners Wire tie mounts AT-9 aluminium Marine-grade wire tie mounts, aluminium, UV and salt water resistant, for outdoor applications. Basic dim. Wire tie width Pull strength Colour Description Art. No. 15 x 25 8,5 110 100 Al natural AT-9 alum. 873 011 000 Nylon strap mounts AT-113 white or AT-113 black The mount is paintable. The AT-113 is used, for example, on battery, motor saw and tank tie downs or for installing heavy hoses and cables. Basic dim. Strap width Pull strength Colour Description Art. No. 25,5 x 82 33 136 25 White AT-113 white 873 013 000 25,5 x 82 33 136 25 Black AT-113 black 873 015 000 10 L Phone: +49 (0)5 41/58 22-0 Fax: +49 (0)5 41/58 22-99 00 E-Mail: vertrieb@titgemeyer.de Tb1695GB(0918)2

WELD MOUNT adhesives AT-2010 acrylic adhesive AT-2010 is a specially formulated acrylic adhesive that cures in just 6 minutes and reaches 75% of its working strength after 15-20 minutes. It is ideally suited for bonding metals, plastics and composite materials. The AT-2010 has a shelf life of 6 months when stored at room temperature, or 12 months when refrigerated. It is supplied in a 50 ml dual cartridge and can be applied using a Köratool PM 207 dispensing gun and the matching Köratool mixing tip. Art. No. 873 077 000 Consumption: Art. A cartouche 50 ml AT-2010 ca. st. AT-3 350 AT-5 225 AT-113 50 M4, M5, M6 threaded studs 75 M8, M10 threaded studs 35 AT-8040 No Slide Multi Bonder AT-8040 is a specially formulated acrylic adhesive that holds every WELD MOUNT fastener securely in place, without sliding, during the application process including on vertical surfaces. The adhesive cures in 12 minutes and reaches 75% of its working strength after 40-45 minutes. It is suitable for most metals as well as thermoplastics and duroplastics. AT-8040 is applied using our Köratool PM 207 dispensing gun and the Köratool mixing tip. The adhesive has a shelf life of 6 months when stored at room temperature, or 12 months when refrigerated. Art. No. 873 079 000 Consumption: Art. A cartouche 50 ml AT-2010 ca. st. AT-3 270 AT-5 175 AT-113 40 M4, M5, M6 threaded studs 60 M8, M10 threaded studs 25 Tb1695GB(0918)2 L Phone: +49 (0)5 41/58 22-0 Fax: +49 (0)5 41/58 22-99 00 E-Mail: vertrieb@titgemeyer.de 11

WELD MOUNT adhesives Köratool PM 207 Handheld dual cartridge adhesive gun complete with 1:1 plunger for use with AT-2010 and AT-8040 adhesive. Art. No. 873 083 000 Köratool mixing tip For use with AT-2010 and AT-8040 adhesive cartridges. Art. No. 873 081 000 The technical specifications contained in this leaflet are approximate and no guarantee is given as to their accuracy! Designs are subject to change. Our design proposals are non-binding! TITGEMEYER and TIOS are registered trademarks. Gebr. TITGEMEYER GmbH & Co. KG Hannoversche Strasse 97 (SatNav: Hettlicher Masch 2) 49084 Osnabrück, Germany Postfach/P.O. Box 4320 49033 Osnabrück, Germany Phone: +49 (0)5 41/58 22-0 Fax: +49 (0)5 41/58 22-99 00 E-mail: vertrieb@titgemeyer.de www.titgemeyer.de