Adhesive Accessories. Adhesive Dispensing Tools. Epoxy Adhesive Dispensing Tools
|
|
- Peter Wells
- 6 years ago
- Views:
Transcription
1 Adhesive Dispensing Tools Our heavy-duty tools are designed to work with our for trouble-free dispensing. Each manual tool provides a 2: drive mechanism for easier dispensing of high-viscosity adhesive. Epoxy Adhesive Dispensing Tools CDT0S Manual Dispensing Tool for SET-XP 0 Adhesive and other Single Cartridge Adhesives The CDT0S features a steel carriage for ultimate durability and is engineered for continuous, high-volume use. The CDT0S also features double-gripping plates that help extend tool life. EDT22S Manual Dispensing Tool for 22 oz. Adhesive Cartridges The EDT22S epoxy adhesive tool features a steel carriage and is engineered for high-volume, continuous use. The tool can be easily convert from dispensing a 22 oz. : ratio cartridge to a. oz. 2: ratio cartridge. EDT22CKT Battery-Powered Dispensing Tool for 22 oz. Cartridges The EDT22CKT offers power dispensing without the need for a hose or compressor. The tool features dosage and rate control for maximum efficiency. Each battery charge dispenses approximately and recharging takes hour. Tool comes complete with two 4.4V batteries and a charger. EDTA22P Pneumatic Dispensing Tool for 22 oz. Cartridges The EDTA22P tool features an optional suitcase handle adapter for the ultimate in tool configuration and dispensing convenience. The suitcase option enables easier and time-saving ground-level doweling. The heavyduty tool comes with a custom, blow-molded plastic carrying case. EDTAP Pneumatic Dispensing Tool for oz. Cartridges The EDTAP tool features an optional suitcase handle adapter for the ultimate in tool configuration and dispensing convenience. The suitcase option enables easier and time-saving ground-level doweling. The heavyduty tool comes with a custom, blow-molded plastic carrying case. Premium tool for singletube Manual tool for 22 oz. Battery-powered tool for 22 oz. Pneumatic tool for 22 oz., 2 Pneumatic tool for oz., 2 CDT0S EDT22S EDT22CKT EDTA22P EDTAP. Air supply attachment is 4-8 NPT (male) thread. 2. Recommended operating air pressure is between psi. CDT0S EDT22S EDT22CKT Tool and Charger EDTA22P C-SAS Simpson Strong-Tie Company Inc. 2 Maintenance tips, troubleshooting and repair parts schematics available at EDTAP
2 Acrylic Adhesive Dispensing Tools ADT8S Manual Dispensing Tool for 2. oz. Cartridges The ADT8S features a steel carriage for ultimate durability. The ADT8S also features double-gripping plates that help extend tool life. ADT0S Manual Dispensing Tool for 0 oz. Adhesive Cartridges The ADT0S features a steel carriage for ultimate durability and is engineered for continuous, high-volume use. The ADT0S also features double-gripping plates that help extend tool life. ADT0CKT Battery Powered Dispensing Tool for 0 oz. Cartridges The ADT0CKT offers power dispensing without the need for a hose or compressor. The tool features dosage and rate control for maximum efficiency. Each battery charge dispenses approximately and recharging takes hour. The tool comes complete with two 4.4V batteries and a charger. ADT8S ADT0S ADTA0P Pneumatic Dispensing Tool for 0 oz. Cartridges The ADTA0P tool features an optional suitcase handle adapter for flexible tool configuration and dispensing convenience. The suitcase option enables easier and time-saving ground-level doweling. The heavy-duty tool comes with a custom, blow-molded plastic carrying case. C-SAS Simpson Strong-Tie Company Inc. Manual tool for 2. oz. Manual tool for 0 oz. Battery-powered tool for 0 oz. Pneumatic tool for 0 oz., 2 AD0CKT battery AD0CKT charger ADT8S ADT0S ADT0CKT ADTA0P EDT4B EDT4VCH. Air supply attachment is 4-8 NPT (male) thread. 2. Recommended operating air pressure is between psi. ADT0CKT ADTA0P EDT4VCH Maintenance tips, troubleshooting and repair parts schematics available at
3 Mixing Nozzles and Retaining Nuts Mixing nozzles are designed for the proper proportioning and mixing of the different adhesive formulations. Use only appropriate Simpson Strong-Tie mixing nozzle in accordance with Simpson Strong-Tie instructions. Modification or improper use of the mixing nozzle may impair epoxy or acrylic performance. EMN22i EMN22i An 8-element mixing nozzle for use with 22 oz. and oz. epoxy adhesives. This is a one-piece nozzle with integrated nut (separate retaining nut not required). AMNQ An -element, high-efficiency static mixing nozzle for use with all acrylic adhesive products. EMNA An 8-element, high-strength, mixing nozzle for dispensing epoxy adhesive through bulk metering equipment. Mixing nozzle for. oz. cartridge (separate retaining nut not required). 8-element nozzle for 22 oz. and epoxy adhesive. Features an integrated threaded nut for attachment to. Pkg EMN.-R 2 24 Packs (2 nozzles per pack) EMN22i 2 Nozzles Packs EMN22i-RP ( nozzles per pack) EMN22i-RP0 0 Packs (0 nozzles per pack) EMN22iB 00 EMNA 8-element nozzle for dispensing epoxy through metering equipment Hi-volume nozzle for 22 oz., and oz. (separate retaining nut not required), " long, major diameter " EMNA-RP Packs ( nozzles per pack) EMN0 0 AMNQ Five mixing nozzles for all AT products AMNQ-RP 0 Packs ( nozzles per pack) Adhesive Retaining Caps Adhesive retaining caps make overhead and horizontal installation easier by preventing the adhesive from running out of the hole. They also center the rod in the hole, making them ideal for applications where precise anchor placement is required. It may be necessary to provide support for the insert during cure time. Adhesive retaining caps are not designed to support the weight of the insert in overhead installations. MATERIAL: Plastic Epoxy Adhesive Retaining Caps For Rod Required Cap Depth Pkg * (ea) Adhesive Retaining Caps Acrylic Adhesive Retaining Caps For Rod Required Cap Depth Pkg * (ea) The X cut in the cap allows the mixing nozzle and insert to pass through, while containing the adhesive in the hole. C-SAS Simpson Strong-Tie Company Inc. ARC-RP 200 ARCA-RP 200 ARC0-RP 200 ARC0A-RP 200 ARC2-RP ARC2A-RP 200 ARC-RP ARCA-RP ARC8-RP 200 ARC8-RP 200 ARC00-RP 200 ARC00A-RP 200 ARC-RP ARC-RP *8 packages of. 4
4 Steel Adhesive-Anchoring Screen Tubes Screen tubes are used in hollow base material applications to contain adhesive around the anchor and prevent it from running into voids. Simpson Strong-Tie screen tubes are specifically designed to work with AT, SET and ET-HP adhesives in order to precisely control the amount of adhesive that passes through the mesh. This results in thorough coating and bonding of the rod to the screen tube and base material. Order screen tubes based upon rod diameter and adhesive type. The actual outside diameter of the screen tube is larger than the rod diameter. MATERIAL: Acrylic screen tubes: 0 mesh stainless steel; Epoxy screen tubes: 0 mesh carbon steel. Caution: Screen tubes are designed for a specific adhesive type. epoxy screen tubes must be used with SET or ET-HP formulations and acrylic screen tubes must be used with AT adhesive. Do not use SET.KTA with screen tubes. Epoxy Adhesive Screen Tube (Acrylic Screen Tubes Similar) Screen tubes are for use in hollow CMU, hollow brick and unreinforced masonry applications. Contact Simpson Strong-Tie for information on special order sizes. C-SAS Simpson Strong-Tie Company Inc. Acrylic (AT) Screen Tubes Stainless Steel 4 Actual Screen O.D./Length. x ATS 0 x ATS 0 x ATS0 00 x ATS0 00 x 0 ATS00 0 x ATS2 0 x ATS2 0 x 0 ATS20 x ATS2 2 x 8 ATS8 2 x ATS 2 x ATS Epoxy (SET & ET-HP) Screen Tubes Carbon Steel 4 Note: Not for use with SET.KTA. Actual Screen O.D./Length. x ETS 0 x 0 ETS0 00 x ETS0 00 x 0 ETS00 0 x ETS2 0 x 0 ETS20 x ETS2 2 x 8 ETS8 2 x ETS 2 x ETS 2 x 2 ETS2
5 Opti-Mesh Adhesive-Anchoring Screen Tubes Screen tubes are vital to the performance of adhesive anchors in base materials that are hollow or contain voids, such as hollow block and brick. The Simpson Strong-Tie Opti-Mesh screen tube provides the economical advantage of a plastic screen tube while providing performance comparable to steel screen tubes and better than competitive plastic screen tubes. MATERIAL: Plastic Caution: Screen tubes are designed for a specific adhesive type. Epoxy screen tubes must be used with SET or ET-HP formulations and acrylic screen tubes must be used with AT adhesive. Do not use SET.KTA with screen tubes. Epoxy (SET and ET-HP) Screen Tubes - Plastic ³ ₈ ¹ ₂ ⁵ ₈ Acrylic Screen Tubes - Plastic ⁹ ₁₆ ³ ₄ ⁷ ₈ ³ ₄ Length ¹ ₂ 0 ¹ ₂ 0 ¹ ₂ Length ETSP ETSP ETS0P ETS0P ETS0P ETS00P ETS2P ETS2P ETS20P ETS2P ETS8P ETSP ETSP ETS2P Load values for installations with SET are on page 0. Load values for installations with ET-HP in unreinforced masonry are on page 44. Not for use with SET.KTA.. ³ ₈ ⁹ ₁₆ ¹ ₂ ATSP ATSP 0 0 ¹ ₂ ³ ₄ 0 ¹ ₂ 0 ¹ ₂ ATS0P ATS0P ATS0P ATS00P ATS2P ⁵ ₈ ⁷ ₈ ATS2P 0 0 ATS20P 8 ATS2P ATS8P ³ ₄ ATSP ATSP 2 ATS2P Load values for installations with AT adhesive are on page. Integral Cap: Serves to center and secure the rod in the screen tube, while displaying important information such as rod diameter, drill bit diameter and the Simpson Strong-Tie " " sign for easy inspection after installation. The cap also prevents adhesive from running out of the front of the screen tube. Flanges: Prevents the screen tube from slipping into over-drilled holes. Allows screen tube to function in holes that are drilled too deep. Open-Mesh Collar: This section of larger mesh allows extra adhesive to flow out of the screen tube behind the face shell of hollow block applications. The extra "collar" of adhesive increases bearing area and results in higher load capacities in hollow concrete block. Color-Coded, Formula-Specific Mesh: The screen tube mesh is sized to allow only the right amount of adhesive to flow through the screen tube to bond with the base material while the balance remains in the screen to bond the rod. The acrylic screen tube mesh is white while the expoxy screen tube mesh is black. U.S. Patent,8,08 Epoxy Screen Tube (mesh is black) Screen tubes are for use in hollow CMU, hollow brick and unreinforced masonry applications. The integral cap centers the rod and displays drill bit and rod diameter. Acrylic Screen Tube (mesh is white) The photo on the left shows the Opti-Mesh screen tube installed in a hollow CMU block. The extra collar of adhesive created by the open-mesh collar results in increased bearing area and higher load values. The typical screen tube shown on the right relies on the bond between the relatively small amount of adhesive in contact with the face shell of the block for its holding power. C-SAS Simpson Strong-Tie Company Inc.
6 Cleaning Brushes Brushes are used for cleaning drilled holes prior to adhesive anchor installation. Brushes have a twisted wire handle with nylon bristles. For Anchor/Rebar For ½" dia x " brush (8" total length) ETB4 4" " " " 24 ETB 4" x 4" brush (" total length) ETB " " " 4" 24 " x 4" brush (" total length) " x 4" brush (24" total length) 4" x 4" brush (2" total length) " x " brush (4" total length ETB8 4" " " 24 ETB8L 4" " " 24 ETB0 " " " " 24 ETB2 4" " " 24 Adhesive Shear Tubes Used in conjunction with anchoring adhesive and screen tubes, adhesive shear tubes transfer anchor shear loads over a larger area, reducing localized crushing in unreinforced masonry installations. Required for thru bolt applications per ICC-ES's unreinforced masonry anchorage "Configuration C" detail. For detailed installation instructions refer to the appropriate adhesive anchor ICC-ES report. Adhesive Shear Tube MATERIAL: Steel FINISH: Zinc-plated "x"x " STEEL PLATE WIRE MESH SCREEN TUBE STEEL SLEEVE (SHEAR TUBE) For use with Simpson Screen Drill Bit Threaded Rod. HEX NUT " DIA. THREADED ROD x 8 AST800 ETS8, ATS8 C-SAS Simpson Strong-Tie Company Inc.. Screens sold separately. Not for use with Simpson Strong-Tie screen #ETS8P or ATS8P plastic Opti-Mesh screen tubes. Retrofit Bolts RFBs are pre-cut threaded rod, supplied with nut and washer. For use with Simpson Strong-Tie adhesives. May be ordered in bulk without the nut and washer. Use with Simpson Strong-Tie adhesives to anchor into existing concrete and masonry. Offers a complete engineered anchoring system when used with Simpson Strong-Tie anchoring adhesives. Each end of the threaded rod is stamped with rod length in inches and our No-Equal symbol for easy identification after installation. MATERIAL: ASTM F4 Grade FINISH: Zinc-plated, hot-dip galvanized Length Zinc Plated Hot-Dip Galvanized Bulk Retail 2 Pack " x 4" RFB#4x4 RFB#4x4HDG 0 0 Configuration C RFB Retrofit Bolts " x " RFB#4x RFB#4xHDG " x " RFB#4x RFB#4xHDG " x " RFB#4x RFB#4xHDG " x 8" RFB#4x8HDG 0 " x 0" RFB#4x0 RFB#4x0HDG 0 " x " RFB#x RFB#xHDG " x 8" RFB#x8 RFB#x8HDG 0 0 " x 0" RFB#x0 RFB#x0HDG 0 0 " x 2" RFB#x2HDG 0 " x " RFB#x RFB#xHDG 0 4" x 0 " RFB#x0. RFB#x0.HDG. Bulk quantities do not include the nut and washer and must be ordered with a -B suffix (example: RFB#4x-B). Hot-dip galvanized RFB s not available in bulk. 2. Retail packs must be ordered with a -R suffix (example: RFB#x2HDG-R).
Product Guide Anchoring and Fastening Systems
2016 2017 Product Guide Anchoring and Fastening Systems (800) 999-5099 www.strongtie.com 2 S-A-PG16 2016 SIMPSON STRONG-TIE COMPANY INC. Adhesive Anchors Product Page No. AT-XP 12 SET-XP 14 ET-HP 16 Tested
More informationUmbrella Inserts and Stubby Screens
ADHESIVE ANCHORING SPECIALISTS Umbrella Inserts and High Performance Adhesive Systems for Fastening to Hollow Base Materials DESCRIPTION/ADVANTAGES Hollow Block Fastening with A7+ Adhesive Umbrella Inserts
More informationUmbrella Inserts and Stubby Screens
ADHESIVE ANCHORING SPECIALISTS Umbrella Inserts and Stubby Screens High Performance Adhesive Systems for Fastening to Hollow Base Materials DESCRIPTION/ADVANTAGES Hollow Block Fastening with A7 Adhesive
More informationSECTION MASONRY ANCHORAGE AND REINFORCEMENT. Display hidden notes to specifier. (Don't know how? Click Here)
PART 1 GENERAL 1.1 SECTION INCLUDES SECTION 04080 MASONRY ANCHORAGE AND REINFORCEMENT Display hidden notes to specifier. (Don't know how? Click Here) A. Post installed masonry anchors. B. Miscellaneous
More informationLarge Diameter Tapcon
CONCRETE ANCHORING SPECIALISTS Large Diameter Tapcon (LDT ) Anchors Finished head, Removable Anchor DESCRIPTION/SUGGESTED SPECIFICATIONS Self-threading Anchors SPECIFIED FOR ANCHORAGE INTO CONCRETE The
More informationPOWER-Skru Large Diameter Concrete Screw
POWER-Skru Large Diameter Concrete Screw Description The POWER-Skru Large Diameter Concrete Screw is a highstrength screw anchor with self-tapping threads that offer a unique undercutting design for anchoring
More informationPURE GP. Adhesives GENERAL INFORMATION SECTION CONTENTS. Epoxy Injection Adhesive Anchoring System
General Information GENERAL INFORMATION PURE GP Epoxy Injection Adhesive Anchoring System PRODUCT DESCRIPTION The Pure GP is a two-component adhesive anchoring system. The system includes injection adhesive
More informationPURE 150-PRO EPOXY ADHESIVE ANCHOR
ONLINE ANCHOR DESIGN SOFTWARE PURE 150-PRO EPOXY ADHESIVE ANCHOR Fully featured and easy to use interface Easy 5 step anchor design with 3D modelling of fastening Professional specification of DEWALT fastenings
More informationSECTION CONCRETE ANCHORING. Display hidden notes to specifier. (Don't know how? Click Here)
PART 1 GENERAL 1.1 SECTION INCLUDES SECTION 03 15 00 CONCRETE ANCHORING Display hidden notes to specifier. (Don't know how? Click Here) A. General purpose mechanical anchors for horizontal and vertical
More informationCIC 200 PLASTIC SCREW ANCHOR ASSORTMENT WITH PHILLIPS BINDING HEAD METAL SCREWS. 6 x 3/4 P/N x 1 METAL SCREW P/N x 3/4 METAL SCREW
A21-1 1160 CIC 200 PLASTIC SCREW ANCHOR ASSORTMENT WITH PHILLIPS BINDING HEAD S For light duty applications in solid materials Color coded diameters for easy identifi cation Acid resistant NYLON FLANGED:
More informationSuper Closeout Deals
Super Closeout Deals Fastronix dealers as well as the general public are welcome to purchase items from our Super Closeout Deals page. You will find a wide assortment of products PRICED TO MOVE! If you
More informationSTRATUS SHELTER. Take bike parking to new heights
Take bike parking to new heights The Stratus Shelter is a striking bike shelter option for any transit station, university campus, or multi-family residential building project. It is constructed of American
More informationHilti HIT-1 / HIT-1 CE Adhesive Anchor System
Concrete Hilti HIT-1 / HIT-1 CE Adhesive Anchor System Injection mortar system Benefits Hilti HIT-1 / HIT-1 CE 300 ml foil tube cartridge Mixer HIT PM HIT-V rods Dispenser: - chemical injection fastening
More informationGCN150 Gas-Actuated Concrete Nailer
GCN0 Gas-Actuated Concrete Nailer The GCN0 gas-actuated concrete nailer is a portable fastening tool for attaching light-duty fixtures such as drywall track, furring strips, hat track and angle track to
More informationANCHORS SLEEVE ANCHORS BOLT DIAMETER
SLEEVE ANCHORS No hole spotting. No mis-alignments. Simply drill through the fixture into concrete, insert and tighten. Preassembled for fast, easy installation. No special tools necessary; meets federal
More informationTO O L K IT. Public Bike Repair
TO O L K IT Public Bike Repair The Dero Tool Kit includes all the necessary tools to perform most routine maintenance and adjustments on most bikes. All the tools are securely fastened with stainless steel
More informationFastener Solutions. USA: 866.LAWSON4U ( ) Canada: lawsonproducts.com
USA: 866.LAWSON4U (866.529.7664) Canada: 800.563.1717 lawsonproducts.com Fastener Solutions 2017 Lawson Products, Inc. All rights reserved. Printed in USA. E686V3 (1/17) LAWSON'S FASTENER SOLUTIONS Tru-Torq
More informationAUXILIARY FRAMING AND ACCESSORIES
CUSTOM CABINETS & RACKS STRUT AND ACCESSO- RIES JUNCTION KITS ANGLE AND BRACE KITS SPLICE KITS BRACE KITS INSTALLATION KITS WALL ANGLE KITS RUBBER END CAPS SUPPORT INSTALLATION AND SUPPORT KITS STANCHION
More informationFASTENERS ANCHORS - ADHESIVE. AC100E Professional Kits. Fasteners - Adhesive Anchoring-Concrete & Masonry
ANCHORS - ADHESIVE AC100E Professional Kits Adhesive value pack for the professional has all the required accessories for post installed chemical anchors, this easy to handle all-in-one kit keeps all your
More informationFASTENERS ANCHORS - ADHESIVE. AC100E Professional Kits. Fasteners - Adhesive Anchoring-Concrete & Masonry
ANCHORS - ADHESIVE AC100E Professional Kits Adhesive value pack for the professional has all the required accessories for post installed chemical anchors, this easy to handle all-in-one kit keeps all your
More informationFixings & Fastenings. Bright Zinc Plated, Galvanised & Stainless Steel. Lockinex. ea i, ea u i
Fixings & Fastenings Bright Zinc Plated, Galvanised & Stainless Steel Lockinex ea i, ea u i INTRODUCTION The Lockinex Range of Fixings & Fastenings are manufactured in Bright Zinc Plate, Hot dipped galvanised
More informationSigma Fasteners, Inc. Section 7
DESCRIPTION PAGE s Wedge s 7-1 Drop-In s 7-2 Single Expansion s 7-2 Machine Screw s 7-2 Lag Shields 7-3 Lead Wood Screw s 7-3 Hammer Drive s 7-4 Hollow Wall Fasteners 7-5 Toggle Bolts 7-6 Toggle Wings
More informationSection 914. JOINT AND WATERPROOFING MATERIALS
914.01 Section 914. JOINT AND WATERPROOFING MATERIALS 914.01. General Requirements. Joint and waterproofing material for use in concrete construction must meet the requirements of this section. 914.02.
More informationPART MATERIALS. Section Fencing Materials. Description
PART 03000 - MATERIALS Section 03010 - Fencing Materials Description 03010.00 Scope - This section consists of the test requirements, specifications and tolerances for barbed wire, woven wire and chain
More informationRELINER INSIDE DROP SYSTEM SPECIFICATIONS
1. PRODUCT NAME RELINER INSIDE DROP SYSTEM U.S. Patent 6074130 Canadian Patent # 2269565 All RELINER Products are proudly made in the U.S.A. 2. MANUFACTURER RELINER /Duran Inc. 53 Mount Archer Rd. Lyme
More informationLENGTH IDENTIFICATION
58 Power-Bolt HEAVY DUTY, ELF-UNDERCUTTING LEEVE TYPE BAE MATERIAL Concrete, Block, Brick, tone IZE RANGE 1/4" x 1" to 1-1/4" x 9 MATERIAL LENGTH IDENTIFICATION The Power-Bolt anchor has a length identification
More informationFlooring Nails 6-D Flooring Nails $3.40 / 1# 6-D Flooring Nails $14.50 / 5# 8-D Flooring Nails $3.40 / 1# 8-D Flooring Nails $14.
Nails Nails Drywall Screws Common Nails 4D Common Nails $3.85 / 1# 6D Common Nails $3.00 / 1# 6D Common Nails $74.25 / 50# 8D Common Nails $3.00 / 1# 8D Common Nails $74.25 / 50# 10D Common Nails $3.00
More informationROCK DRILLS Tabor Place, Santa Fe Springs, California, CA 90670, U.S.A.
S Website: www.apt-tools.com e-mail: info@apt-tools.com TDS-1027 Rev A S TOOL MAINTENANCE & REPAIR INFORMATION FIELD OPERATION: Before use: 1. Fill the reservoir with air tool oil or 10W equivalent for
More informationToday s Service Station
F I X IT Today s Service Station The Fixit includes all the tools necessary to perform basic bike repairs and maintenance, from changing a flat to adjusting brakes and derailleurs. The tools and air pump
More informationPURE150-PRO CHEMICAL ANCHOR
PURE150-PRO CHEMICAL ANCHOR www.dewalt.com/anchors FAST CURING & HIGH STRENGTH ADHESION. The Pure150-PRO is a two-component high strength epoxy adhesive anchoring system designed for bonding steel elements
More information5/16" Flange nut. Bolt Keeper Plate (8" Sq. SYS.) (3) 1/2" x 3" Hex head connector zinc plated bolt w/ washers and nut. Anchor 3" sq. 7 Ga.
2 1/2" x 2 1/2" x 10 Ga. 6" 5" 4" Variable Slipbase (8" Sq. SYS.) 5/16 Corner Bolt W/ nut 5/16" Flange nut Stub Insert (8" Sq. SYS.) Bolt Keeper Plate (8" Sq. SYS.) (3) 1/2" x 3" Hex head connector zinc
More informationAIR KIT 3. Heavy-Duty Public Bike Pump
Heavy-Duty Public Bike Pump The Air Kit 3 is designed for heavy-duty, repeated public use. The waterproof gauge and burly construction mean that this pump will continue to work long after others have failed.
More informationStructural Bolting. Notice the Grade 5 has a much smaller head configuration and a shorter shank then the grade A325 structural bolt.
Structural Bolting ASTM F3125/F3125M is a structural bolt specification covering inch and metric bolt grades. This specification contains 4 inch series bolting grades: A325, F1852, A490, and F2280. These
More informationMulti-Set II Drop-In Anchors
CONCRETE ANCHORING SPECIALISTS Internally Threaded Heavy- Duty Anchoring Systems DESCRIPTION/SUGGESTED SPECIFICATIONS Drop-In, Shell-Type Anchors SPECIFIED FOR ANCHORAGE INTO CONCRETE Drop-In, shell-type
More informationMudsill Anchorage Systems in Cripple Wall Retrofits
Mudsill Anchorage Systems in Cripple Wall Retrofits By Howard Cook, Contractor Bay Area Retrofit Inc. Wendy Allen P.E Anchorage Systems Field Engineer Simpson StrongTie December 21, 2005 International
More informationLetter of Transmittal/Submittal
Letter of Transmittal/Submittal FROM: TO: Baker Concrete Construction 1904 Jasper Street DATE JOB NUMBER 09/23/10 Aurora, CO 80011 9921 303.367.8111 ATTENTION Nick Dewald 937.536.9000 RE: Bruce Herman
More informationHang-TITE Rod Hanger Screws
Description The Hang-TITE Rod Hanger Screw is a one-piece, internally threaded anchor designed for suspending threaded rod for applications like cable-tray, pipe hanging, fire protection, and electrical
More informationGENERAL ELEVATION SECTION A-A
NORTH OR WEST Final pavement Elev. m @ roadway 12 352 out to out precast backwall panels Final pavement Elev. m @ roadway SOUTH OR EAST Pile cut-f Elev. m Pile cut-f Elev. m 3:1 3:1 Approx. existing groundline
More informationH O O P RAC K. Simple Security
H O O P RAC K Simple Security The Hoop Rack is a proven design that provides high security and easy bike parking. The Hoop Rack uses thick pipe construction and the full radius of the bend makes the Hoop
More informationCHEMSET Reo 502 EF TECHNICAL DATA SHEET. Extra Heavy Duty Pure Epoxy Anchoring Adhesive
Date of Issue: September 9, 2015 Extra Heavy Duty Pure Epoxy Anchoring Adhesive Chemset Reo 502EF is a high performance Pure Epoxy anchoring adhesive specially designed for concrete structural connections
More informationSADDLE BUDDY EASY ASSEMBLY. The Saddle Buddy is easy to install Galvanized Surface In-Ground. Rail.
SAD D L E B U D DY Saddle Up. Designed for trailheads, bike parks and picnic areas, the Saddle Buddy offers a resting place for cyclists noble steeds. The convenient bar allows cyclists to keep their bikes
More informationKOLO SHELTER Installation Instructions Parts List
Parts List Roof Cap Rafter Upright Polycarbonate Polycarbonate Drop Polycarbonate Flange Center Weldment (Short length shown above) Polycarbonate Edge Bolt.25 x 6.5 Bolt.625 x 7.5 Threaded Rod.75 x 14
More informationTechnical Data February, 2016
Technical Data February, 2016 Product Description 3M DP-600 is a non-sag, grey, rapid setting, two-component polyurethane. It is packaged as 1:1 ratio liquids in a duo-pak cartridge. With the squeeze of
More informationOLYMPIADTM. Installation, Operation & Maintenance Manual
OLYMPIADTM Installation, Operation & Maintenance Manual OLYMPIAD & LEGEND CHAIRS INSTALLATION OPERATION MAINTENANCE MANUAL HUSSEY SEATING COMPANY NO. BERWICK, MAINE 03906 TEL. 1-800-341-0401 FAX No. 1-207-676-0444
More informationTENANT IMPROVEMENT 16 FEBRUARY WEST 27TH STREET, 4TH FLOOR 100% CD OWNER/BID ADD 1-03/08/2018
SECTION 055000 - PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply
More informationGeneral Information...SA1-SA4
SECTION S INDEX Product Description Page Number General Information................................................................SA1-SA4 Type FSK Thruwall & Floor Seal For Conduit, Pipe or Tubing............................
More informationTHE CASCADE & SLINGER FUNSLIDES
THE CASCADE & SLINGER FUNSLIDES ASSEMBLY AND INSTALLATION INSTRUCTIONS * * C A U T I O N * * S.R. SMITH CASCADE TM & SLINGER TM FUNSLIDES TM ARE MANUFACTURED FOR INSTALLATION AND USE ON RESIDENTIAL INGROUND
More informationKhathij Industrial Fasteners
Dear Sir/Madam, Khathij Industrial Fasteners This is Saqubar Sadique representing 'KHATHIJ INDUSTRIAL FASTENERS' from Chennai, India. We 'Khathij industrial fasteners' like to introduce us as a Stockist
More informationSuperstrut. Metal Framing. Beam Clamps. Design Loads. Finishes and Special Materials
Loads Where design loads are indicated, they provide for a safety factor of 3 in conformance with the merican Standard Code for Pressure Piping. For more information, see page 57 for Engineering Data and
More informationThe Saddle Rack. For Power And Communication Cables
The Saddle Rack For Power And Communication Cables Underground Devices SADDLE RACKS: Low Cost, But Tough and Non-Corrosive For Temporary Support or Permanent Installation For Use in Manholes, Handholes,
More informationSafe and secure Dero
B I K E D E P OT Safe and secure Whether the project is at a transit station, university campus, or residential building, the Bike Depot s modular design lets customers easily build out to meet their space
More informationBike Locker Model DBL1 & DBL2
Bike Locker Model DBL1 & DBL2 DBL1 & DBL2 are constructed of 99% recycled steel and is available in 20 standard powder coat colors or a galvanized finish. DBL1 & DBL2 store 1 or 2 bikes effortlessly and
More informationGAGING AND INSPECTION
Fixture Plates...75 Fixturing Towers...76 CMM Fixturing Kits... 77-78 Clamping Components... 79-80 Standoffs and Locators... 81-82 Magnetic Components... 83-84 Height Adjustment...84 Positioners...85 Clamp
More informationThru Wall Floor Seals For New Installation
The O-Z/Gedney Thruwall and Floor Seals provide a positive means of sealing pipe, conduit or tube where they pass through a concrete foundation of a structure below grade or below ground water level or
More informationSECTION EXPANSION FITTINGS AND LOOPS FOR HVAC PIPING
SECTION 230516 - EXPANSION FITTINGS AND LOOPS FOR HVAC PIPING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and
More informationH O O P RAC K. Simple Security
H O O P RAC K Simple Security The Hoop Rack is a proven design that provides high security and easy bike parking. The Hoop Rack uses thick pipe construction and the full radius of the bend makes the Hoop
More information1.1 SUMMARY. A. This Section includes the following: 1. Loose steel lintels. 2. Shelf angles. 3. Metal floor plate. 4. Pipe bollards.
PART 1 - GENERAL 1.1 SUMMARY A. This Section includes the following: 1. Loose steel lintels. 2. Shelf angles. 3. Metal floor plate. 4. Pipe bollards. B. See Division 5 Section "Pipe and Tube Railings"
More informationToday s Service Station
F I X I oday s Service Station he Fixit includes all the tools necessary to perform basic bike repairs and maintenance, from changing a flat to adjusting brakes and derailleurs. he tools and air pump are
More informationPREPARATION & TOOL CHECKLIST
INSTRUCTION MANUAL RAILING PRODUCTS BEGIN TO AGE AS SOON AS THEY ARE EXPOSED TO NATURE. BUILDINGS EXPERIENCE AGING FACTORS DIFFERENTLY, SO IT IS DIFFICULT TO PREDICT HOW LONG RAILING PRODUCTS WILL LAST.
More informationAccess Risers and Tank Adapters
Access Risers and Tank Adapters Installation Instructions Access risers provide access to septic tank openings, simplifying inspection and maintenance procedures. It is important that the riser be sized
More informationDowntown Rack. Custom logo option available
Custom logo option available Downtown Rack The Downtown Rack uses thick, square-tube construction that can t be cut with a pipe cutter. The extended width of the Downtown Rack makes for easy bike parking
More informationKO LO SH E LT E R. High Capacity and Flexibility
KO LO SH E LT E R High Capacity and Flexibility The unique styling of our redesigned Dero Kolo Shelter will help beautify your facility and provide secure, covered bike parking for cyclists. The Kolo is
More informationPREPARATION & TOOL CHECK LIST
INSTRUCTION MANUAL RAILING PRODUCTS BEGIN TO AGE AS SOON AS THEY ARE EXPOSED TO NATURE. BUILDINGS EXPERIENCE AGING FACTORS DIFFERENTLY, SO IT IS DIFFICULT TO PREDICT HOW LONG RAILING PRODUCTS WILL LAST.
More informationS W E RV E RAC K. Simple Security. Simple Stability.
S W E RV E RAC K Simple Security. Simple Stability. The Swerve Rack is a proven design that provides high security and easy bike parking. The Swerve Rack uses thick pipe construction and the full radius
More informationSECTION METAL FABRICATIONS
SECTION 05100 PART 1 - GENERAL 1.01 DESCRIPTION A. Section includes specifications for metal fabrications, including minimum requirements for fabricator, and galvanizing. 1.02 REFERENCE STANDARDS A. ASTM
More informationNo No No
INSTALLATION, ASSEMBLY & MAINTENANCE MANUAL BASEBALL BACKSTOP No. 331025 No. 331036 No. 331039 No. 331025 No. 331036 No. 331039 INSTALLER NOTE: Upon completion of the installation/assembly of this baseball
More informationThe All American Anchor is a positive drive positive setting anchor for use in all masonry materials / / /8 7 1/ /16
ALL AMERICAN ANCHORS A PIN DRIVE EXPANSION ANCHOR DIAMETER /4" 5/6" 3/8" /2" 5/8" 3/4" The All American Anchor is a positive drive positive setting anchor for use in all masonry materials. ALL AMERICAN
More informationDelrin Cone T-Handle Spring Stop w/pad...9 Screw Jack Large Toggle Clamp w/pad...9 Adjustable Ball Positioner...14
Distributed by Rapp Industrial Sales INDEX Aluminum Fixture Plates...4 Pin Rest...11 Acrylic Plates...4 Thread Adapter...11 Fixturing Towers...5 Delrin Cone...11 CMM Fixturing Kits...6-7 Magnetic Rest
More informationSD Screw #10x2½" 16dx2½" SD Screw #9x2½" SD Screw 10dx1½" 8d Common N54A 0.25" 0.131"
DESIGNED FOR FASTENER TYPES Fastener Types and s Specified for Simpson Strong-Tie Connectors Many Simpson Strong-Tie connectors have been designed and tested for use with specific types and sizes of fasteners.
More informationTHE ROGUE TM FUNSLIDE TM
THE ROGUE TM FUNSLIDE TM ASSEMBLY AND INSTALLATION INSTRUCTIONS * * C A U T I O N * * S.R. SMITH ROGUE TM FUNSLIDES TM ARE MANUFACTURED FOR INSTALLATION AND USE ON RESIDENTIAL INGROUND POOLS ONLY. ROGUE
More informationUltraCon Masonry Fasteners High Performance in a Wide Range of Applications
UltraCon Masonry Fasteners High Performance in a Wide Range of Applications The UltraCon masonry fastening system from Elco Construction Products offers optimal performance in a wide range of masonry applications.
More informationHOOP RACK HEAVY DUTY Setbacks WALL 36" WALL 42" 36" STREET 59" STREET Dero
Setbacks WALL 36" WALL 42" STREET 36" 59" STREET Installation Instructions Tape Measure Marker or Pencil Masonry Drill Bit Drill (Hammer drill recommended) Hammer Wrench 9/16 Level RECOMMENDED BASE MATERIAL
More informationSYW Industry Sdn. Bhd. Stud Anchor. Hexagon Nut / Flange Nut. U - Bolt (c/w 2 Nuts) Steel Band. 1 of 8
SYW Industry Sdn. Bhd. Stud Anchor Hexagon Nut / Flange Nut U - Bolt (c/w 2 Nuts) Steel Band 1 of 8 BT Anchor (MM size) Expansion Anchor 2 of 8 Set Anchor Sleeve Anchor with Flange Nut 3 of 8 BT Anchor
More informationUltraCon Masonry Fasteners High Performance in a Wide Range of Applications
UltraCon Masonry Fasteners High Performance in a Wide Range of Applications The UltraCon masonry fastening system from Elco Construction Products offers optimal performance in a wide range of masonry applications.
More informationIF YOU DON T SEE IT HERE
www.smithfast.com Drills & Taps & Bits Screws Cotter Drilling Bolts / Hex Capscrews Lag Carraige Hitch Grade 8 Machine Grade Elevator 5 Sheet Spring Metal Roll Grade Eye 2 Square Taper Head set A325 Hex
More informationH HD Adult Wheelchair Swing Frame & Hangers(perm) IMPORTANT
Page 1 IMPORTANT PLEASE READ THESE INSTRUCTIONS BEFORE COMMENCING ASSEMBLY. All equipment must be installed in accordance with these instructions. Check your shipment against Bill of Lading and Parts list.
More informationBUILT BY AMERICA. CONNECTED WORLDWIDE.
P R O D U C T G U I D E 1 MECHANICAL ANCHORING SYSTEMS BUILT BY AMERICA. CONNECTED WORLDWIDE. It s a simple idea: make products as reliable and innovative as the people who use them. Today, we are the
More informationHollo Set Drop-In Anchors
Description The Hollo Set drop-in anchor is an internally threaded, flush mount expansion anchor designed for use in hollow and solid base materials. In hollow concrete block and precast hollow core plank,
More informationCONTENTS CABLE MANAGEMENT AND
CONTENTS CABLE MANAGEMENT SECTION 9 SECTION 9 CABLE MANAGEMENT AND ASSOCIATED PRODUCTS.................................91 PIN CLIPS H335B SERIES.......................................92 COPPER EARTH RODS.........................................92
More informationTools Sec. 23 2FW. 2018
Tools Sec. 23. 2018 Kits Ratchet Type Standard Nutsert Tool Part # Included In Kit Sizes Tool Type Qty. 12938 Nosepiece and Mandrel included 10-24, 10-32, 1/4"-20, 5/16"-18, 3/8"-16 Thread Size Nosepieces
More informationICC-ES Evaluation Report
ICC-ES Evaluation Report www.icc-es.org (800) 423-6587 (562) 699-0543 ESR-2608 Reissued January 2016 This report is subject to renewal January 2017. A Subsidiary of the International Code Council DIVISION:
More informationSTEEL PIPE GUIDERAIL 01/01/
NOTES PIPE RAILING & POSTS: Pipe Rails and s shall be in accordance with ASTM A5 Grade B for standard weight pipe and ASTM A500 Grade B, C or D or ASTM A50 for structural tube. Bars for handrail supports
More informationBumper Sign INSTALLATION INSTRUCTIONS
Bumper Sign INSTALLATION INSTRUCTIONS BUMPERSIGN TOOL CHECKLIST SDS MAX Rotary Hammer Drill Marker/Pencil SDS MAX 1 Carbide Drill Bit Tape Measure Torque Wrench with ½ Drive Power Source Vacuum ½ Drive
More informationALUMINUM PIPE GUIDERAIL 01/01/
NOTES PIPE RAILING & POSTS: Structural Tube, Pipe and Bar shall be in accordance with ASTM B22 or ASTM B429, Alloy 606-T6. End Rail 90 bends and corner bends with maximum 4-0" post spacing, may be Alloy
More informationSTRUCTURAL ATTACHMENTS
Brace Structural Attachment Selection Procedure ) Determine structure to be attached to from the following: A) Concrete B) Wood Beam C) Structural Steel 2) Reference structure connection type from Appendix
More informationThe DeltaGrip System. Safety and Operating Instructions. Trigger. Air Supply Connection. Handle Assembly. Air Line Assembly.
The DeltaGrip System Safety and Operating Instructions Trigger Air Supply Connection Handle Assembly Air Line Assembly Punch Die Pneumatic Diaphragm Assembly Shackle, Pin & Jam Nut Jaw Frame Shoulder Screw
More informationPLAY HOUSE IMPORTANT
IMPORTANT Page 1 PLEASE READ THESE INSTRUCTIONS BEFORE COMMENCING ASSEMBLY. All equipment must be installed in accordance with these instructions. Check your shipment against Bill of Lading and Parts list.
More informationSuperstrut. Metal Framing. Beam Clamps. Design Loads. Finishes and Special Materials
Loads Where design loads are indicated, they provide for a safety factor of 3 in conformance with the merican Standard Code for Pressure Piping. For more information, see page 57 for Engineering Data and
More informationDYNABOLT PLUS ANCHORS DYNABOLT PLUS. Anchor Details. Installation Ramset Regions. Site Map. Home Page. Performance. Next Page. Date of Issue: 9/98
Date of Issue: 9/9 Dynabolt Plus is a general purpose all steel medium duty through fixing for masonry and concrete. For fixing to Concrete, solid and hollow brick, masonry, natural stone. Surface Finish
More informationMISCELLANEOUS SIGN CONNECTION DETAILS TYPICAL ROUTE MARKER ASSEMBLIES SIGN TO POST MICHIGAN DEPARTMENT OF TRANSPORTATION
5-4" SEE DETAIL I COUPLING BAR ON 3 2-10" CANTILEVER SIGN SUPPORT TYPICAL ROUTE MARKER ASSEMBLIES 5/1 DIAMETER STAINLESS STEEL BOLT AND NYLON INSERT LOCK NUT SELF-ALIGNING STEEL REINFORCING PLATE ( TYPE
More informationSection J-2: Glides and Levelers. Section J-2: Glides and Levelers. Glides and Levelers. Last Updated: 07/02/10
Section J-2: Glides and Levelers Section J-2: Last Updated: 07/02/10 Maverick Hardware Section J-2: Light Duty Glides Adjustable Suggested applications: residential, RTA furniture, and store fixtures.
More informationOceanside Outdoor Vinyl Shower Kit (3 x 3 Enclosure)
Oceanside Outdoor Vinyl Shower Kit ( x Enclosure) A B ASSEMBLY GUIDE REQUIRED FOR INSTALLATION (A) Zippity Post Extension for In-Ground Installation (Sold as 4-Packs) (B) Zippity Galvanized Steel Surface
More informationWedge Type Anchors. Trubolt. Wedge Anchor ADVANTAGES
CONCRETE ANCHORING SPECIALISTS Dependable, Heavy-Duty, Inspectable, Wedge Type Expansion Anch 2015 IBC Compliant DESCRIPTION/SUGGESTED SPECIFICATIONS Wedge Type Anchs SPECIFIED FOR ANCHORAGE INTO CONCRETE
More informationBUILD YOUR OWN SWIM RAFT
Steve Maxwell s BUILD YOUR OWN Composite Top & Simple Design Makes For Great Summer Fun CLICK FOR TABLE OF CONTENTS At first glance it would seem that I built this raft for my kids, but that s not entirely
More informationPSI COMPAKT SEALS AND WALL SLEEVES WITH FIXED/LOOSE FLANGE
PSI COMPAKT SEALS AND WALL SLEEVES WITH FIXED/LOOSE FLANGE IN GALVANIZED OR STAINLESS STEEL FOR BUILDINGS WITH OR WITHOUT SEALING SHEETS IN SPLIT VERSION FOR RETROFITTING WWW.PSI-PRODUCTS.COM 37 GENERAL
More informationDimensions Mechanical and Performance Requirements. Drop-In Anchors Hollow Wall, Steel Regular Style Drive Style...
Dimensions Mechanical and Performance Requirements Drop-In Anchors... 257 Hollow Wall, Regular Style... 258 Drive Style... 259 Hollow Wall, Plastic Ribbed... 260 Conical, Light Duty... 261 Fluted, Light
More informationNext Level Security. This 2-tier locker ships flat to save on freight, comes in galvanized and powder coat finish options, and has a modular design.
T WO - T I E R B IK E LO C K E R Next Level Security We take long-term bicycle storage to new heights with the new Dero Two-Tier Bike Locker. It is easy to load and provides a space-saving solution to
More informationOperations and Instruction Manual G-Lok Anchorage - Model #????? Portable Concrete and Steel Anchorage Connector ANSI Z359.
TM Operations and Instruction Manual G-Lok Anchorage - Model #????? Portable Concrete and Steel Anchorage Connector ANSI Z359.1 5,000 lbs / 22kn Made in the USA 3/4 Fall Protection G-Lok s are to be used
More informationPRICE BOOK NO. 204S ORDERING INFORMATION
Container Quantities PRICE BOOK NO. 204S ORDERING INFORMATION Replacing Catalogue 789S Effective March, 2007 and Packaged items are supplied in full containers and we reserve the right to adjust order
More informationPARTS LIST MS 2892-D
PARTS LIST MS 89-D 8--00 8-0-000 KNIFE BRACE (TOP) 8--00 RIGHT KNIVE (UHMW) 8--00 LEFT KNIFE (UHMW) 8-0-00 KNIFE BRACE (UNDER) NC0-8-0 0 FLAT HEAD SOCKET CAP SCREW STAINLESS /8- X " LG NC0-9-00 0 LOCK
More information