diode laser platform DIODE ASER PATFORM Effective+profitable+versatile 808 755 DIODE ASER HAIR REMOVA termosalud.com/eneka
At TERMOSAUD we are pioneers in the Wellbeing, Health and Beauty industry (BSB Bienestar, Salud y Belleza). Our experience spanning more than 30 years researching, designing and manufacturing highly innovative products and equipment, places us at the forefront of the latest trends in beauty medicine, balneotherapy and spa, customised cosmetics and intelligent fabrics designed for biohealth. The wide range of equipment and products we manufacture, along with the related consultancy and technical assistance services, mean we can offer innovative and pioneering solutions for a sector that is characterised by its high level of demand and drive. Created as a company manufacturing equipment and apparatus for professional cosmetic treatment, TERMOSAUD has developed over the years to incorporate complementary business lines related to health and wellbeing. CORPORATE TRAJECTORY 30 YEARS TERMOSAUD oficinas centrales.
EADERSHIP AND TECHNICA EXPERTISE GUARANTEED ENEKA PRO DIODE ASER is manufactured entirely in Spain, with the high level of innovation, expertise and effectiveness necessary for the manufacturing of the medicalesthetic equipment developed by Termosalud over the last three decades. A team of highly qualified professionals has enabled Termosalud to become a leading company in the manufacture of medicalesthetic equipment, based on their continuous commitment and expertise in innovation and development. An extensive network of national and international partners helps us to keep abreast of our customers needs so we can offer them the most innovative solutions on the market. Termosalud holds the strictest national and international quality and manufacturing certifications for medical devices, enabling it to offer the best service in this sector. ENEKA PRO DIODE ASER is the result of the advanced research and development carried out by our TERMOSAUD R+D team, under strict safety controls and with detailed analysis of all the variables that affect the correct treatment of the hair, thereby guaranteeing the maximum effectiveness and safety of all the treatments. ENEKA PRO DIODE ASER conforms to the demanding ISO 9001 and ISO 13485 quality certifications for the manufacture of medical devices. 100 % I + D SPANISH TECHNOOGY
diode laser platform DIODE ASER PATFORM Effective+profitable+versatile 808 nm 755 nm wavelength spot 10 x 9 mm X 20 x 9 mm 1,8 cm² 2X 34 x 14 mm 4,8 cm² 10 x 9 mm frequency 1 4 Hz DHR 10 Hz FDHR
HIGH POWER With up to 5000 optical watts power, ENEKA PRO DIODE ASER incorporates the contact cooling system CONTACT COOING SAPPHIRE which makes the treatment safer and more pleasant. MAXIMUM RESUTS The ENEKA PRO DIODE ASER innovative technology allows the best results from the first session, maximising the safety and effectiveness of the treatment on all skin phototypes, all year round. VERSATIITY ENEKA PRO DIODE ASER allows the use of the different 808nm and 755nm wavelengths in the same device, to guarantee the best results even on fine, residual hair from the last sessions. PROFITABIITY The new X spot size 20 x 9 mm and 2X 34 x 14 mm enable the beautician to treat large areas much more quickly, thereby offering greater PROFITABIITY for the salon. The repetition frequency of the pulses, of up to 4Hz (DHR), makes the ENEKA PRO one of the quickest devices on the market. DIODE ASER PATFORM FOR HAIR REMOVA diode laser platform
versatility The versatility of the 808 nm laser diode handpiece adapts perfectly to suit all skin phototypes, regardless of the colour or thickness of hair. The high power of up to 5000 watts, the two functioning modes (DHR and FDHR) and the new spot sizes, boost the results considerably, offering a personalised solution that adapts to suit the needs of each zone to be treated. 808 POWER WORK MODES ENERGY / PUSE DURATION SPOT 10 x 9 mm SPOT X 20 x 9 mm 2000 W 4000 W 5000 W DHR FDHR DHR FDHR DHR FDHR 50 J/cm 2 23ms 12 J/cm 2 6 ms 40 J/cm 2 18 ms 10 J/cm 2 5 ms SPOT 2X 34 x 14 mm 25 J/cm 2 26 ms 7 J/cm 2 8 ms The 755 nm wavelength is the most absorbed by the melanin, therefore is especially effective on light skin. (phototypes I to III). The ENEKA PRO 755nm handpiece eliminates in a permanent way the thinner and less pigmented hair. It is equally effective with residual hair in the last sessions. 755 POWER WORK MODES ENERGY / PUSE DURATION SPOT 10 x 9 mm 2000 W DHR FDHR 30 J/cm 2 20 ms 10 J/cm 2 6 ms A TYPES TECHNOOGY All phototypes. All hair types. All year round SKIN TYPE HAIR TYPE A SEASONS
WAVEENGTH ENEKA PRO DIODE ASER is a platform that allows to work with different wavelengths: 808 nm and 755 nm in order to bring more versatility and precision to the treatments. It guarantees the best results even on fine, residual hair from the last sessions, and is also very effective for all skin phototypes and all year round 808 nm 755 nm DIODE ASER PATFORM FOR HAIR REMOVA diode laser platform
profitability ENEKA PRO DIODE ASER is a platform that has three spot sizes of up to 34 x 14 mm, which means it can be used on areas of different sizes to suit the treatment requirements. The ergonomic, light handpiece is very comfortable and can easily be used for long periods of time. To provide great levels of profitability, especially when treating larger areas, the device has a range of spots with sizes that enable the operator to work more quickly and with maximum efficacy. SPOT 10 x 9 mm 808 nm 755 nm X 20 x 9 mm 1,8 cm² 2X 34 x 14 mm 4,8 cm² 10 x 9 mm CONTACT COOING SAPPHIRE TIP SYSTEM TIP EADING TECHNOOGY The ENEKA PRO handpiece incorporates a contact cooling system that guarantees the safety of the patient and minimises the pain: CONTACT COOING SAPPHIRE TIP SYSTEM The exclusive system created by Termosalud means the temperature is constantly regulated automatically, maintaining the tip of the handpiece at between 0º 5º, respecting the skin and guaranteeing the safety of the treatment ENEKA PRO is fitted with an interior cooling unit, which maintains the equipment at an optimal temperature thereby preventing any technical downtime during the treatment. This cooling system also prevents any possible incidents over the useful life of the device.
SPOT 2X 34 x 14 mm 4,8 cm² ESTIMATED TIME for FU EG TREATMENT 5.000 cm² 10 x 9 mm 5000 w X 20 x 9 mm 2X 34 x 14 mm SPOT 1,8 cm² 4,8 cm² 4 Hz 3,60 7,2 19,2 Duration sec. 1.389 694 260 TREATMENT TIME aprox. 30 minutes 19 minutes 11 minutes X 20 x 9 mm 1,8 cm² 10 x 9 mm 4000 w 2000 w 10 x 9 mm 2000 w D I O D E A S E R P AT F O R M F O R H A I R R E M O VA diode laser platform
maximum results versatilidad SAFETY IN THE TREATMENT SETTINGS With ENEKA PRO DIODE ASER you can adjust the laser settings to suit the skin type and specific characteristics of the hair, thereby offering your clients maximum safety and effectiveness in their personalised treatment. Using the intuitive touch screen, you can select the required mode and programmes. The device recognises the type of handpiece used and automatically adapts the configuration circle to it. In each mode (DHR or FDHR) you can adjust the settings precisely for the skin, colour and hair type and the hair thickness, to obtain the required values for each treatment. 808 nm 755 nm DIODE ASER PATFORM FOR HAIR REMOVA
TWO FUNCTIONING MODES MAXIMUM EFFECTIVENESS The power of ENEKA PRO DIODE ASER allows you to work with high doses of energy (DHR) and ultra short pulses or in blast mode (FDHR) with low doses of energy at maximum speed (10Hz). DHR DYNAMIC HAIR REMOVA This functioning mode uses ultra short pulses with high doses of energy. It is ideal for all skin and hair phototypes. The working frequency up to 4 Hz is another of the significant characteristics of this functioning mode. FDHR FAST DYNAMIC HAIR REMOVA The FDHR continuous mode works with intervals of maximum speed up to 10Hz and low fluence, that allow a gradual warming of the pilous bulb and don t cause the patient any unease, even on the most difficult conditions, such as a high amount of hair, first sessions, low threshold for pain and da rker phototypes. The FDHR mode works in two different ways. It allows you to work with the maximum number of blasts per grid, or to programme the time of luminous administration per grid (10 cm 2 ). The device adjusts the pulse duration according to the parameterized fluence. FUENCE Simple and immediate set up of the amount of energy applied in each shot. WAVEENGTH 808 nm 755 nm from from 1 J/cm up to 50 J/cm 1 J/cm up to 40 J/cm 2 2 2 2 PUSES It has 4 pulse widths at the maximum fluence: PUSE WIDTH AUTO 30 ms FUENCE PHOTOTYPES for phototypes I and II for phototypesi II and II 100 ms for phototypes IV and V 400 ms for phototypes VI CINICA EFFECTIVENESS TERMOSAUD has a highly qualified training and clinical monitoring team, that checks the level of therapeutic response for the devices developed by our R+D department and supervises their application guidelines, in order to achieve maximum results. 808 nm Patient 1 data: Phototype III / Handpiece 808 / Spot 34x14 DHR mode / 12 J / cm 2 /30ms/1Hz 755 nm FREQUENCY Choice of hertz to suit the functioning mode selected: MODE FREQUENCY DHR MODE 808 nm DHR FDHR 1, 2, 3 and 4 Hz 10 Hz Patient 2 data : Photoype II / Handpiece 755 / Spot 10x9 DHR mode / 24 J / cm 2 /AUTO /3Hz FDHR MODE 755 nm diode laser platform
TECHNICA DETAIS: DIODE ASER HANDPIECES diode laser platform Ref. M91 * work table ENEKA PRO optional Power supply: Maximum consumption: Interface: Functioning mode: Cooling system : OUTPUT CHARACTERISTICS aser classification: Source: Wavelength: Optical output energy: Pulse duration: Repetition rate: Spot size: Cooling: 230 V a.c 50/60 Hz 110 V a.c 50/60 Hz (optional) 960 VA Color screen 10,2 Touch Screen Backlight ED DHR / FDHR Compressor System Chiller (R134a) 808 nm DIODE ASER Class 4 Diode laser AlGaAs 808 nm 2000 W / 4000 W / 5000 W 3 ms 400 ms 110 Hz 10 x 9 mm ( 0,9 cm 2 ) / 20 x 9 mm ( 1,8 cm 2 ) / 34 x 14 mm ( 4,8 cm 2 ) Contact Cooling Sapphire Tip System between 0º 5ºC 755 nm DIODE ASER Class 4 Diode laser AlGaAs 755 nm 2000 W 6 ms 400 ms 110 Hz 10 x 9 mm ( 90 mm 2 ) Contact Cooling Sapphire Tip System between 0º 5ºC 1 x 808 nm DIODE ASER HP spot: 10 x 9 mm REF: A437 1 x 808 nm DIODE ASER HP X spot: 20 x 9 mm REF: A444 (OPTIONA) 1 x 808 nm DIODE ASER HP 2X spot: 34 x 14 mm REF: A445 (OPTIONA) 1 x 755 nm DIODE ASER HP spot: 10 x 9 mm REF: A438 (OPTIONA) ENVIROMENTA CONDITIONS OF THE EQUIPMENT Ambient functioning temperature 2030ºC Ambient storage / transporting temperature. 040ºC Air pressure 7001060hPa Relative humidity or air <80ºC (without condensation) ENEKA PRO ACCESORIES INCUDED 1 x GASSES FOR CIENT REF: S364 Dimensions: Weight: 62 cm (h) x 43 cm (l) x 63 cm (a) 32 kg 1 x CERAMIC GASSES REF: SUBP243 P.Ind..os Campones. C/ Ataulfo Friera Tarfe nº 8. Tremañes 33211 Gijón. ASTURIAS. SPAIN tel. +34 985 167 547 info@termosalud.com termosalud.com 2017 Termosalud. Dpto. de Marketing Certificate ES15/1842 Certificate ES15/1843