WOODEN SASH WINDOW STOPS Rola sash stops are designed to stop sash windows opening past each other whilst allowing ventilation. The heads revolve, but they are removable with a key. A Rola S comes in three sizes: The 31mm combats those sash windows with large gaps between them as well as those tapered bottom halves. The 19mm for standard wooden windows. The 15mm fastens into a smaller threaded insert and is therefore suitable for double glazed wooden sash windows and those finer frames. A separate rectangular Stop Plate is available to protect the window frame. Spare threaded inserts are available to allow two positions for each stop. R 1/01 R1/02 loose R1/03 1 pack R1/04 R1/05 loose R1/07 Loose R1/08 Description (31mm Body, 17mm Screw, M6 Thread.) (31mm Body, 17mm Screw, M6 Thread.) (15mm Body, 12mm Screw, M5 Thread.) (15mm Body, 12mm Screw, M5 Thread.) R1/09 Loose Sash Stop Plate 25mm x 18mm The Rola SW is designed to stop windows opening past each other, whilst allowing ventilation. The head revolves but retracts into the window frame with a key. R1/06 1 pack 1 Body, Stop Plate, and Screws (Projection 14mm, Body length 22mm)
WOODEN CASEMENT LOCK all Bramah & Rola products. METAL WINDOW LOCK R2/01 1 pack The Rola C casement window lock is designed for wooden, side hinged or vertical and horizontal center pivot windows. For those windows with tapered edges, substantial play is built into the lock. Body, threaded insert and Screws (Projection 16mm, Body Length 32mm) Rola MW metal window locks are designed to screw together a Crittal window and frame. The heads revolve. They are available with a 12mm or 25mm screw, M5 thread. HINGE BOLT R3/01 R3/02 1 Body (15mm Body, 12mm Screw, M5 Thread) 1 Body (15mm Body, 25mm screw, M5 thread) The Rola Hinge Bolt consists of a steel pin and plate specifically designed to secure outward opening front doors where the door hinges are visible and open to attack. However, they are often used as standard on inwardly opening doors. R7/01 2pack Hinge Bolt Plate, Pin and screws
RENOWN LOCKING BOLTS Rola Renown locking bolts are used to secure wooden and metal French doors, hinged back doors and back gates. They are also used as temporary locks, on doors previously attacked, whilst a new door is being prepared. Most Rola renown bolts are supplied with a knob end to allow a simple push and pull action especially necessary for users with impaired dexterity, and because the bolts do not lock automatically, they are most suited for the disabled. Rola Renown bolts come in four sizes: 800mm. The Rola Renown 800 has a 25mm throw and is suitable for the top bolt on tall doors or operation by users confined to wheelchairs. 550mm. The Rola Renown 550 has a 25mm It is useful where extra length is required or as a bottom bolt for those confined to wheelchairs. 190mm. The 190 model has the added advantage of a longer 75mm 130mm. The standard Rola Renown comes in two body shapes the knob end and a streamlined version, both have a 25mm Packing pieces are available 3mm thick to pack under bolts. The 2mm for Crittal frames. Renown staples are used to secure or provide bolt holes in wooden frames. Renown bolts come in four sizes and three designs, A,H and L: Design A is for inwardly opening doors such as back gates, front doors and as a temporary lock after normal lock fail. Design H is for outwardly opening doors such as French doors. Design L is for use as an alternative when frame construction does not allow design A or H top be used. Hole centre approximately 17mm and 22mm R5/01 1 pack Satin Silver R5/02 1 pack Satin Silver R5/05 1 pack Satin Silver R5/06 1 pack Satin Silver R5/09 1 pack Satin Silver R5/08 1 pack Satin Silver R5/10 10 pack Satin Silver R5/03 1 pack Satin Silver R5/04 1 pack Satin Silver R5/07 1 pack Satin Silver from the base of the L. R5/11 1 pack Satin Silver Renown Locking Bolt with flush end for wood or metal. 25mm Renown Locking Bolt with Ball end for wood or metal. 25mm Renown 800 Locking Bolt with Ball end for wood and metal. 25mm Renown 550 Locking Bolt with Ball end for wood and metal. 25mm Renown 190 Locking Bolt for wood and metal. 75mm Renown 3mm thick Packing Piece for use under Rola renown Locking Bolts. Rola Renown 2mm thick Packing Piece to locally increase Crittal frame thickness. A type Staple for Rola Renown Locking Bolts. H type Staple for Rola Renown Locking Bolts. L type Staple for Rola Renown Locking Bolts. 15mm from base of fixing plate to hole centre. L type Staple for Rola Renown Locking Bolts. 22mm from base of fixing plate to hole centre.
MULTI PURPOSE LOCKS Rola Multi-Purpose are a variety of threads and fasteners that can be combined to be used in problem situations, for example Stay Locks, Dual Screws, Single and Double Sliding Patio Doors, Removable Grille and Access Panel Locks. The Multi-Purpose components come in ten variations. There are four lengths of threads, 13, 17, 40 and 130mm, all with 19mm bodies and M6 threads. Three threaded inserts for wood, two with tapered heads - M5 and M6 and an M6 threaded insert that can be placed at any depth. A solid steel block, suitable for wood or metal is cross-threaded with an M6 thread. For sheet materials or extrusions, especially UPVC or aluminium there are two Rola fasteners for M5 and M6 threads. Description Number per pack R4/01 Rola MP 1 Body Plated or 2 (19mm Body, 17mm Screw, M6 Thread) R4/02 Rola MP 1 Body (19mm Body, 40mm screw, M6 Thread) R4/03 Rola MP 1 Body (19mm Body, 130mm screw, M6 Thread) R4/04 Rola MP 1 Body (17mm Screw, M6 Thread) R4/05 Rola Wood Fastener Threaded inserts (Cross Threaded, M6 Thread) R4/06 Rola UPVC or Aluminium Fasteners (M6 Thread) R4/07 Rola Wood Fasteners Threaded Block (13mm Screw with Tapered Head, M5 Thread) R4/08 Rola UPVC or Aluminum Fastener (M5 Thread) Plated or 2 Plated or 2 Plated 10 Plated 2 Off 10 Plated 10 Off 10 R4/09 Rola MP 1 Body (19mm Body, 13mm Screw, M6 Thread) Plated or Loose R4/10 Rola Wood Fasteners Threaded inserts. (13mm Screw with Tapered Head, M6 Thread) Plated or 10
WINDOW LOCKS AND KEYS Metal Fanlight Window Lock (R3/04 ROLA FM) ed in white Stops Fanlight windows opening Simple to fit (Stay not included R3/06) ed in white. Uses a standard Rola key (R6/01), not included. Metal Casement Window Lock (R3/03 Rola CM) Stops casement windows opening simple to fit. Cockspur handle not included. *6mm packing pieces available. ed in white. Uses a standard Rola key (R6/01), not included. Description Number per pack R6/01 Rola Keys Standard (70mm shaft) Plate 2 R6/02 Rola Keys Standard (70mm shaft) Plate Loose R6/03 Rola keys Standard (28mm Shaft) R6/04 Rola Keys Long (105mm Shaft) Plate 2 Plate 2 Rola keys operate all They are available in three sizes: Short - 28mm shaft. Standard 70mm shaft Long 105mm shaft. Shorter or longer keys are available for special installations.