Lighting Services Inc Job Name Here Fixture Type Here Ordering Information Here Designer/Firm Name Here LUMELEX MAR-L3 SERIES 1/2V LED The LumeLEX MAR3 Series features the highly efficient Xicacto XTM Modules and a variety of optics and accessory options for unprecedented flexibility. Designed for the Xicato XTM LED module up to Watts Extremely tight color consistency (less than 2 MacAdam Ellipses) System efficiency up to 0 lumens/watt Backed by Xicato s Five Year Color Consistency and Lumen Maintenance Warranty Tested to LM and LM0 Protocols 0,000 hour life to 0% lumen output, L0 at F max ambient Integral electronic driver compatible with reverse phase (ELV compatible) dimmers down to % Choice of 13, 24 or 43 field changeable optic 2 Aiming Choice of LED modules with various lumen outputs Choice of color temperatures Color Rendering Index (CRI) of either (high) or 3+ (standard) No UV or IR emissions; no mercury or lead All LumeLEX modules are field replaceable Can be ordered for 1V or 2V Sturdy steel housing with spun aluminum lamp holders Accepts up to three size-b LSI filters and accessories Thermally protected and approved for all Non-IC ceiling types, including air handling plenums Unique spring-loaded clamping system facilitates installation in plaster, sheetrock or acoustic tiles Supplied with LED driver Flange finishes: LSI Black, White and Silver Fixture weight: 1 LB SPECIFICATIONS 1/16 30mm 6mm /16 21mm /16 31mm / 24 1/2 626mm 16mm Typical Ceiling 6 1/16 1/4 mm 1 /16 4mm 21 3/4 2mm 04/1 www.lightingservicesinc.com mm
ORDERING INFORMATION 1. Choose the product code (L3) for Large 3-head fixture 2. Choose the numeric code to designate the desired LED Rating Lumens/CRI/Wattage (13-) for 1300//1 (-3) for 00/3/ (21-) for 20//24 (2-3) for 0/3/24 3. Choose the numeric code to designate the desired Color Temperature (2) for 0K (30) for 3000K (3) for 300K (40) for 4000K 4. Use the following alpha-numeric codes to designate the Optic: (M13) for 13 (M24) for 24 (M43) for 43. Choose the letter code for Dimming Type: (TE) Trailing Edge (ELV Reverse Phase) (%) () 0-V (%) (L3) Lutron Ecosystem 6. Choose the desired Voltage: (1) for 1V (2) for 2V. Choose a Finish for your fixture: Black (B) White (W) Silver (S) Trimless (T) Example: LXMAR-L3-13- - 2 - M24 - TE - 1 - W FIXTURE LED RATING COLOR TEMP OPTIC DIMMING VOLTAGE FINISH. Don t forget your Accessories! ACCESSORIES Other accessories: Glass Color Filters B Spread Lenses B0, B2, B, B6 Beam Softener B Louver Hex B Hexcell metal louver, controls spill light and glare, 4 cutoff, black finish. Light Blocking Screens B01S, B02S, B03S Hood B Cross Baffle B Hood Sparkle B Color Spread Gels Backer Ring B www.lightingservicesinc.com Solid State 04/1
LUMELEX MAR-L3 SERIES OPTICS 4 3/ (1mm) M13 REFLECTOR (1mm/13 ) Computer designed polycarbonate specular optic. Tool-less, twist and lock installation. 4 3/ (1mm) M24 REFLECTOR (1mm/24 ) Computer designed polycarbonate specular optic. Tool-less, twist and lock installation. 4 3/ (1mm) M43 REFLECTOR (1mm/43 ) Computer designed polycarbonate specular optic. Tool-less, twist and lock installation. 04/1 www.lightingservicesinc.com
LUMELEX MAR-L3 SERIES PERFORMANCE The performance characteristics of the LumeLEX MAR Series can be customized based on the LED module and the optic (reflector) selected. Each available LED module is defined by four characteristics the color rendering index (CRI), the correlated color temperature (CCT), the power that it uses (watts), and its available lumens. Note that available lumens is a theoretical value that represents the light output of the module on its own no fixture or optic attached. In the LSI part number, the LED module is specified with a number that immediately follows the product series number. For example, in the part number LXMAR-L3-13--2-M24-TE-1-W, the 13--2 represents an LED module with an output of 1300 lumens, a CRI of, a power usage of 1 watts and a color temperature of 0K. Additional parameters, such as Center Beam Candle Power (CBCP), Delivered Lumens, and Efficiency (Lumens per Watt) are all shown in a table that is organized by LED module and optic combination. CBCP = Center Beam Candle Power LED Module Optic (Reflector) Lumens/CRI/Wattage M13 M24 M43 1300//1 24 3 00/3/ 0 4600 2613 20//24 1 4 21 0/3/24 4 6 3 Delivered Lumens LED Module Optic (Reflector) Lumens/CRI/Wattage M13 M24 M43 1300//1 2 40 2 00/3/ 10 1600 10 20//24 16 160 16 0/3/24 2133 2160 2133 Efficiency = Lumens Per Watt LED Module Optic (Reflector) Lumens/CRI/Wattage M13 M24 M43 1300//1 00/3/ 0 20//24 6 0 6 0/3/24 0 Absolute range of values are +/- % of typical value, and are for all color temperatures LED Module Lumens/CRI/Wattage 1300//1 00/3/ 20//24 0/3/24 SKU Code 13- -3 21-1-3 Nominal Fixture Power (+/- %), Watts 1 24 24 Maximum Inrush Current Amps Minimum Power Factor 0.2 0.2 0.2 0.2 Inrush current is instantaneous current drawn by the LED only when fixture is initially powered on or instantaneously changed from full dim to full bright. For more details see Dimming Application Sheet, IS-0. www.lightingservicesinc.com Solid State 04/1
LUMELEX MAR-L3 SERIES PHOTOMETRIC DATA LED RATING: -3 M13 Optic Beam Spread (minimum) 13 Center Beam Candlepower 0 M24 Optic Beam Spread (minimum) 24 Center Beam Candlepower 4600 M43 Optic Beam Spread (minimum) 43 Center Beam Candlepower 2613 LED RATING: 2-3 M13 Optic Beam Spread (minimum) 13 Center Beam Candlepower 4 M24 Optic Beam Spread (minimum) 24 Center Beam Candlepower 6 M43 Optic Beam Spread (minimum) 43 Center Beam Candlepower 3 LED RATING: -3 All Max. Footcandles at 0 Beam Axis M43 (43 ) 2613 63 20 163 3 3 41 32 26 22 1 1 13 6 4 M24 (24 ) 4600 0 2 4 2 46 3 32 2 1 16 13 M13 (13 ) 0 30 136 6 42 342 21 12 12 1 2 3 63 4 43 3 34 31 2 2 21 All Distances in Feet 6 4 2 0 2 4 6 1 2 3 4 6 13 1 16 1 1 1 21 22 24 2 Photometric Data based on LED Rating: -3 (00 Lumens/3CRI/watts) LED RATING: 2-3 M43 (43 ) M24 (24 ) M13 (13 ) All Distances in Feet 6 4 2 0 2 4 6 All Max. Footcandles at 0 Beam Axis 3 0 436 24 1 0 61 4 3 32 2 1 1 6 6 164 31 4 263 13 134 3 1 66 4 46 3 34 2 26 1 16 1 4 46 0 3 3 3 2 22 12 4 2 2 64 1 46 42 3 3 32 30 1 2 3 4 6 13 1 16 1 1 1 21 22 24 2 Photometric Data based on LED Rating: - (0 Lumens/3CRI/24watts)
LUMELEX MAR-L3 ACCESSORIES SPREAD LENSES AND BEAM SOFTENER No. Description % of Light Transmission 0 Spread Lens/Clear 3 ( X 0 ) 2 Spread Lens/Clear ( X 30 ) Spread Lens/Clear 3 (0 X 0 ) 6 Spread Lens/Clear 6 (4 X 0 ) Beam Softener/Clear 0 (4 X 4 ) BACKER RING B Stainless steel ring to hold gel when no other size Baccessories are being used. LOUVER HEX B 1/ thick Hexcell black metal louver used for thin profile. 1. LIGHT BLOCKING SCREENS B Stainless steel mesh screens used alone or in combinations will block from approximately % to 0% of the transmitted light without changing color temperature of the light. No. % of Light Blocked B01S B02S 30 B03S 40 1. Figures vary based upon LED Module/Optic being used and relationship of screen(s) to LED Module/Optic and to each other. www.lightingservicesinc.com Solid State 04/1
LUMELEX MAR-L3 SERIES GELS As the foremost innovator in accent lighting, LSI offers a complete range of pre-cut Gels to modify the spread and color of light for the LumeLEX LED Series. LumeLEX SPREAD GELS Size: B (4 1/4" diameter) Spread Gel GEL-L1-B GEL-L-B GEL-L-B GEL-L-B GEL-L30-B GEL-L40-B GEL-L60-B GEL-L0-B GEL-L30B-B GEL-L40B2-B GEL-L60B1-B GEL-L60B-B GEL-LB4-B GEL-L0B60-B GEL-R1-B 1 Spread Gel Spread Gel Spread Gel Spread Gel 30 Spread Gel 40 Spread Gel 60 Spread Gel 0 Spread Gel 30 by Spread Gel 40 by 0.2 Spread Gel 60 by 1 Spread Gel 60 by Spread Gel by 4 Spread Gel 0 by 60 Spread Gel Beam Softener LumeLEX COLOR GELS Size: B (4 1/4" diameter) GEL-R2-B GEL-R-B GEL-R-B GEL-R13-B GEL-R-B GEL-R21-B GEL-R2-B GEL-R26-B GEL-R2-B GEL-R-B GEL-R62-B GEL-R1-B GEL-R2-B GEL-R1-B GEL-R-B GEL-R-B GEL-R1-B GEL-R4-B GEL-R-B GEL-R1-B GEL-R30-B Gel Color Bastard Amber Pale Yellow Straw Straw Tint Medium Straw Golden Amber Orange Red Light Red Medium Red Lavender Booster Blue Sea Blue Azure Blue Primary Green Light Grey Medium Grey Light Frost Tough Silk Lt. Hamburg Frost Blue Diffusion Rose Gold Size: B (4 1/4" diameter) Gel Color GEL-R3-B Canary GEL-R34-B Half Blue GEL-R331-B Shell Pink GEL-R33-B Sapphire Blue GEL-R3-B Pale Grey GEL-R01-B Storaro Red GEL-R04-B Storaro Green GEL-R0-B Storaro Violet GEL-R32-B Full Blue GEL-R36-B Third Blue GEL-R3216-B Eighth Blue (Boosts 30K to 3300K) GEL-R331-B Tough 1/ Minusgreen GEL-R34-B Roscosun (1/ CTO) (Reduces 00K to 400K) GEL-R3441-B Full Straw (CTS) GEL-R3443-B Quarter Straw (CTS) GEL-R4330-B CalColor 30 Cyan GEL-R441-B CalColor 1 Green GEL-R440-B CalColor 0 Green GEL-R460-B CalColor 60 Pink GEL-R40-B CalColor 0 Pink GEL-R430-B CalColor 30 Lavender 04/1 www.lightingservicesinc.com
COLOR MEDIA COLOR FILTERS As the foremost innovator in accent lighting, LSI offers a complete range of permanent fade-free glass color filters, which are available in nine stock diameters. All glass color filters are rimmed in a seamless aluminum ring and are slotted for heat expansion. Size Diameter LSI Fixture Series AAA 2 3/ LumeLEX /30/31/3, SSLGR16, LumeLEX MAR-S AA 3 LumeLEX 24 (with LX24-Holder or LX24-Barndoor), LumeLEX 26, LumeLEX 44, LumeLEX 4 A 3 1/2 LumeLEX 60, SSL0, SSLGR30CL, SSLGR36 B 4 1/4 LumeLEX MAR-L C 4 3/4 SSL, SSLGR3CL, LumeLEX 4 LumeLEX Special Glass Color Filters LSI will fabricate, on special order, glass color filters in most sizes and shapes. FS4 Color Filter Samples To facilitate selection of glass color filters, LSI supplies a complete set of 1 3 /4 X 1 3 /4 labeled glass and dichroic samples in a handy carrying case. 1 % of Light No. Color Transmission 02 Medium Pink 36 03 Deep Pink 3 04 Flesh Pink 3 06 Pale Lavender 0 Surprise Pink 1 0 Lilac 21 Warm Red Strawberry 6 Ruby 4 13 Magenta 1 Light Amethyst 2 1 Medium Amethyst 16 16 Deep Amethyst 4 1 Olive 1 1 Light Green 6 Medium Green 2 21 Deep Green 22 Silver green 6 Yellow Green 4 24 Emerald Green 2 Light Turquoise 6 26 Medium Turquoise 40 2 Deep Turquoise 1 2 Light Blue 34 30 Medium Blue 3 32 Daylight 33 Gene Moore Blue 1 36 Grey 6 3 Light Blue Green 1 3 Light Amber 6 40 Medium Amber 4 41 Deep Amber 43 42 Straw 43 Gold 44 Canary Yellow 4 4 Lemon 1 46 Pumpkin 32 4 Tangerine 4 Orange 4 Pink Gold 4 0 Bronze 4 1 Brass 2 Autumn Tan 3 Leaf Brown 1 4 Butter Pecan 3 Toasted Almond 1 Notes: 1. Values given are approximate due to slight variations in glass color and thickness. 04/1 www.lightingservicesinc.com
COLOR MEDIA DICHROIC COLOR FILTERS In addition to our complete line of glass color filters, LSI now offers dichroic glass color filters that achieve purer, more saturated, richer color by selective wavelength transmission. Since these filters reflect rather than absorb the unwanted color wavelengths, a higher intensity of colored light can be obtained with fewer or lower wattage fixtures. In addition, this selective transmission allows for very accurate color matching from filter to filter. All standard LSI filter sizes are available in a wide palette of well chosen dichroic colors that can be used with all LSI fixtures that accept accessories. LSI dichroic glass color filters have the added benefit of being rimmed for extra durability to allow for frequent usage without fear of breakage or edge chipping. Size Diameter LSI Fixture Series AAA 2 3/ LumeLEX /30/31/3, SSLGR16, LumeLEX MAR-S AA 3 LumeLEX 24 (with LX24-Holder or LX24-Barndoor), LumeLEX 26, LumeLEX 44, LumeLEX 4 A 3 1/2 LumeLEX 60, SSL0, SSLGR30CL, SSLGR36 B 4 1/4 LumeLEX MAR-L C 4 3/4 SSL, SSLGR3CL, LumeLEX 4 LumeLEX Special Glass Color Filters LSI will fabricate, on special order, dichroic glass color filters in most sizes and shapes not exceeding a 13 diameter circle overall. FS4 Color Filter Samples To facilitate selection of glass color filters, LSI supplies a complete set of 1 3/4 X 1 3/4 labeled glass and dichroic samples in a handy carrying case. Technical Data Dichroic color filters are created in a vacuum chamber by multi-layer vapor deposits of different minerals onto low expansion, chemically resistant Borosilicate glass. Deposits are made in alternating layers of varying microscopic thickness which allow very narrow color wavelengths to be selectively transmitted and all other wavelengths to be reflected. LSI does not recommend using dichroic color filters with lamps or fixtures that have beam spreads greater than 40 because a secondary color aura is created by the wide angular transmitted wavelengths that are different than the desired color wavelength. Since there is mainly transmission and reflection of the color wavelengths by the dichroic filter and very little absorption, the dichroic filter can be used with many high temperature lights that normally would not accept color filters. % of Light No. Color Transmission 01 Light Pink 6 02 Medium Pink 43 03 Hot Pink 04 Pale Pink Deep Magenta 2 Lavender 24 Vivid Magenta 31 13 Lavender Accent 4 Lilac 3 1 Purple Fusion Sky Blue 3 21 Sea Blue 3 22 Cyan 33 Light Blue Green 30 24 Primary Blue 24 2 Medium Red Blue 1 26 Deep Purple 16 2 Peacock Blue 3 2 Mediterranean Blue 2 Boost Blue 1 40 Light Yellow Green 64 41 Fern Green 4 42 Turquoise 3 43 Primary Green 31 44 Industrial Green 64 0 Yellow 0 1 Amber 1 2 Amber Blush 3 3 Bastard Amber 1 4 Goldenrod 63 Bright Straw 6 60 Medium Orange 1 61 Orange 44 0 Flame Red 2 1 Primary Red 2 www.lightingservicesinc.com Solid State 04/1