PHASE-LOCKED OSCILLTOR TO 16 GHz PLO-SFSO/MFSO-B1-S/E/C

Similar documents
Frequency Synthesizer

Frequency Synthesizer

Features. = +25 C, Vdc = +12V

RS3400W/04 77 GHz Radar Sensor

HMC6380LC4B. WIDEBAND VCOs - SMT. Electrical Specifications, T A. Typical Applications. Features. General Description. Functional Diagram

Features. = +25 C, Vd1 = 3.6V, Vd2 = 20V, Vd3 = 6V

Features. = +25 C, Vcc = +5V [1]

Features. = +25 C, Vcc = +5V. Parameter Min. Typ. Max. Units Frequency Range GHz Power Output 3 dbm SSB Phase 10 khz Offset -60 dbc/hz

= +25 C, Vcc = +3.3V, Z o = 50Ω (Continued)

Features. = +25 C, Vcc = +5V

Frequency Synthesizer

Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED

DS H01 DIGITAL SYNTHESIZER MODULE SYSTEM SOLUTIONS. Features Applications 174 x 131 x 54 mm. Technical Description

Frequency Synthesizer

3 GHz to 6 GHz Frequency Synthesizer

Features. = +25 C, 50 Ohm System, Vcc= 5V

Military End-Use. Phased Array Applications. FMCW Radar Systems

Radar transponders. WORK Microwave GmbH Raiffeisenstrasse Holzkirchen Germany

NON-CATALOG Frequency Synthesizer

Features. = +25 C, Vcc = +3.3V, Z o = 50Ω

Features. = +25 C, 50 Ohm System, Vcc = 5V. Parameter Conditions Min. Typ. Max. Units. Maximum Input Frequency GHz

Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED

Frequency Synthesizer

Features OBSOLETE. = +25 C, Vcc1 = Vcc2 = +5V

Features. Pout: +9 dbm. Parameter Min. Typ. Max. Units

Features. = +25 C, Vcc = +3V

Features. = +25 C, Vcc= 5V

HIGH-VALUE PHASE-LOCKED COAXIAL RESONATOR OSCILLATOR

Features. = +25 C, Vcc = +3V

SHF Communication Technologies AG

Features OBSOLETE. = +25 C, Vcc= 5V [1]

v Features = +25 C, 50 Ohm System, Vcc = 5V

Phase Noise. Phase Noise (dbc/hz) Storage Temp. Range -55 to +125 ºC. Bias Voltage (Digital) Bias Voltage (Converter) Bias Voltage (VCO)

HMC358MS8G / 358MS8GE

SSB0260A Single Sideband Mixer GHz

Features. = +25 C, Vcc = +5V, Z o = 50Ω, Bias1 = GND

Features. Output Power: 2 dbm Typical Spurious Suppression: >20 dbc SSB Phase Noise: khz Offset Test Instrumentation

Features. = +25 C, Vcc(RF), Vcc(DIG) = +5V

VS-701 High Shock Discrete Voltage Controlled SAW Oscillator

PXI MICROWAVE LOCAL OSCILLATOR MODULE

Rubidium Frequency Standard Model AR133A Ruggedized Low Profile

QuickSyn Frequency Synthesizers

Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED

Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED

HMC705LP4 / HMC705LP4E

HMC437MS8G / 437MS8GE

Features. = +25 C, Vcc = +5V. Parameter Min. Typ. Max. Units Fo Fo/2 RFOUT RFOUT/2

Frequency Synthesiser / Multiple LO Source

RFVC1843TR7. 9.8GHz to 11.3GHz MMIC VCO with Fo/2 and Fo/4 Outputs. Features. Applications. Ordering Information

Low Noise Oscillator series LNO 4800 B MHz

Analog Devices Welcomes Hittite Microwave Corporation

Features. = +25 C, Vcc = +5V. Parameter Min. Typ. Max. Units Fo Fo/2 RFOUT RFOUT/2

O-CDFEXYZXX-X-X-10MHz/100MHz Precision Ultra Low Phase Noise Dual Frequency OCXO Reference Module (DFRM)

Datasheet SHF D Synthesized Clock Generator

NON-CATALOG Frequency Synthesizer

12.17 GHz to GHz MMIC VCO with Half Frequency Output HMC1167

Model 865 RF / Ultra Low Noise Microwave Signal Generator

SP4T RF Switch 50 Ω Absorptive RF switch 1 to 6000 MHz Internal driver, Single Supply Voltage 2.3V to 3.6V

TEL: FAX: HMC3LP / 3LPE v.21 SMT GaAs HBT MMIC x ACTIVE FREQUENCY MULTIPLIER, GHz OUTPUT Evalua

Frequency vs. Tuning Voltage, Vcc = +4.2V 17 Frequency vs. Tuning Voltage, T= 25 C FREQUENCY (GHz) FREQUENCY (GHz) Vcc = 4.

<180 fs RMS Jitter 24-bit Step Size, Resolution 3 Hz typ Exact Frequency Mode Built in Digital Self Test 40 Lead 6x6 mm SMT Package: 36 mm 2

HMC695LP4 / HMC695LP4E

Features. = +25 C, Vcc (Dig), Vcc (Amp), Vcc (RF) = +5V. Parameter Min. Typ. Max. Units Fo Fo/4 RFOUT RFOUT/4

OBSOLETE HMC915LP4E. GaAs MMIC MIXER w/ INTEGRATED LO AMPLIFIER, GHz. Typical Applications. Features. Functional Diagram. General Description

5.5 GHz to 14 GHz, GaAs MMIC Fundamental Mixer HMC558A. Data Sheet FEATURES FUNCTIONAL BLOCK DIAGRAM APPLICATIONS GENERAL DESCRIPTION

Features. = +25 C, 50 Ohm System, Vcc= +5V

Features. = +25 C, Vcc (Dig), Vcc (Amp), Vcc (RF) = +5V

VS-507 Voltage Controlled SAW Oscillator

7 GHz INTEGER N SYNTHESIZER CONTINUOUS (N = ), NON-CONTINUOUS (N = 16-54) Features

Demo Circuit DC550A Quick Start Guide.

12.92 GHz to GHz MMIC VCO with Half Frequency Output HMC1169

Features. = +25 C, 50 Ohm System, Vcc= +3V

AMPLIFIER/DOUBLER/AMPLIFIER

QuickSyn Frequency Synthesizers

TGV2561-SM GHz VCO with Divide by 2

Features. = +25 C, 50 Ohm System, Vcc= 5V

RFVC GHz to 12.1GHz MMIC VCO with Fo/2 and Fo/4 Outputs

Features OBSOLETE. = +25 C, 50 Ohm System, Vcc= 3V

QUICK START GUIDE FOR DEMONSTRATION CIRCUIT 678A 40MHZ TO 900MHZ DIRECT CONVERSION QUADRATURE DEMODULATOR

Operating Instructions

11.41 GHz to GHz MMIC VCO with Half Frequency Output HMC1166

VS-504 Dual Frequency VCSO High Frequency

Features. = +25 C, IF = 200 MHz, LO = 0 dbm, Vcc = Vcc1, 2, 3 = +5V, G_Bias = +2.5V*

Ultra-Low Phase Noise OCXO

DDS-PLL SYNTHESIZER DPL-2.5GF USER S MANUAL DIGITAL SIGNAL TECHNOLOGY, INC.

1 MHz 6 GHz RF Mixer with built in PLL Synthesizer

<180 fs RMS Jitter 24-bit Step Size, Resolution 3 Hz typ Exact Frequency Mode Built in Digital Self Test 40 Lead 6x6 mm SMT Package: 36 mm 2

Specification RIGOL. 6 Specification

Frequency vs. Tuning Voltage, Vcc = +5V OUTPUT FREQUENCY (GHz) Frequency vs. Tuning Voltage, T= 25 C OUTPUT F

Features. = +25 C, Vdc = +7V

5.5: A 3.2 to 4GHz, 0.25µm CMOS Frequency Synthesizer for IEEE a/b/g WLAN

Frequency Doublers. Catalog Products (EAR99/Non-ITAR)

THE PHS 8500 FAMILY OF VERY LOW PHASE NOISE HIGH PERFORMANCE MICROWAVE SYNTHESIZERS BENCHTOP

Features OBSOLETE. = +25 C, Vcc1, Vcc2 = +5.0V. Parameter Min. Typ. Max. Units Frequency Range GHz. Divided Output

Low voltage LNA, mixer and VCO 1GHz

PXIe Contents SPECIFICATIONS. 14 GHz and 26.5 GHz Vector Signal Analyzer

Features. Upconversion & Downconversion Applications MIXERS - SINGLE & DOUBLE BALANCED - SMT

HMC3716LP4E FREQUENCY DIVIDERS AND DETECTORS - SMT. Typical Applications. General Description. Functional Diagram

QuickSyn Lite mmw Frequency Synthesizer

Model 7000 Series Phase Noise Test System

Transcription:

Datasheet PHASE-LOCKED OSCILLTOR 1.925 TO 16 GHz TMYTEK s phase-locked oscillator is a pre-configured source suitable for any RF front-end systems. The SFSO and the MFSO series offers users the choice of single frequency output or multiple frequencies output up to 32 sets of frequencies. It features excellent phase noise performance, wide band coverage and superior flexibility. It is available in three package styles including SMT, evaluation board and connectorized module. Not to mention it has the world s fastest delivery time with no MOQ and no NRE charge. Features Fastest delivery in the world 7 ~ 14 days* 1 Wide frequency coverage up to 16 GHz Very low noise Up to 32 pre-configured frequencies SMT, EVB-board, Connectorized Module available Integrated with TMYTEK s ReF TM Technology No MOQ. No NRE. Figure 1. PLO SMT Module Photo Performance Specifications Parameter Condition Min Typ Max Units Frequency RF Port 1 1.925 --- 8 GHz RF Port 2 7.7 --- 16 GHz Phase Noise @ 100 khz Offset RF = 6 GHz --- -92.5 --- dbc/hz @ 100 khz Offset RF = 12 GHz --- -86.5 --- dbc/hz Spurs --- < 40 --- dbc 2nd Harmonic --- < 20 --- dbc Output Power 1.925 to 8 GHz RF Port 1 +2 --- +8 dbm 7.7 to 16 GHz RF Port 2-1 --- +5 dbm Load Impedance --- 50 --- Ω Settling Time --- 90 --- μs External Reference 10 100 800 MHz 2018 TMYTEK. All rights reserved. 1

Datasheet Operating Specifications Parameter Min Typ Max Units Parameter Temperature Range -40 --- +85 o C Temperature Range VCC for Module --- 5 --- V VCC for Module VCC for REFin --- 3.3 --- V VCC for REFin Current Consumption --- 290 --- ma Current Consumption Frequency Selection Single Frequency (SF) series outputs single and precise frequency as per customer s request. Single Frequency with Single-tone Output signal (SFSO) Multiple Frequencies (MF) series offers up to 32 pre-configured frequencies to be selected digitally. The selection is based on a 5-bit frequency logic control. The minimum frequency step size is 1 MHz.* 2 Multiple Frequency with Single-tone Output signal (MFSO) Series Tones Frequency Minimum Step Size SFSO One tone Fixed --- MFSO One tone Select up to 32 frequencies 1 MHz* 2 TMYTEK s ReF TM Technology can reconfigure the module with different frequencies. With this technology, not only you will free your working space with redundant stocks, you will also save money for your next project. You just need to send the module back to us and we will reconfigure and deliver to you with the new specification at a reasonable price.* 4 2018 TMYTEK. All rights reserved. 2

Datasheet Typical Performance Figure 2. Spectrum at 3 GHz Carrier Figure 3. SSB Phase Noise at 3 GHz Carrier Figure 4. Spectrum at 6 GHz Carrier Figure 5. SSB Phase Noise at 6 GHz Carrier Figure 6. Spectrum at 8 GHz Carrier Figure 7. SSB Phase Noise at 8 GHz Carrier 2018 TMYTEK. All rights reserved. 3

Datasheet Typical Performance (Continued) Figure 8. Spectrum at 12 GHz Carrier Figure 9. SSB Phase Noise at 12 GHz Carrier Figure 10. Spectrum at 14 GHz Carrier Figure 11. SSB Phase Noise at 14 GHz Carrier Figure 12. Spectrum at 16 GHz Carrier Figure 13. SSB Phase Noise at 16 GHz Carrier 2018 TMYTEK. All rights reserved. 4

Datasheet Package Details Available in three different package styles: SMT Module Figure 14. SMT Module Package Outline* 4 Table 1. Pin Configuration Pin No. Function Pin No. Function 1,2,3,5,7,8,9,11,13 GND 17,18,19,20,21 Freq Ctrl 4 RF Port 1 22 REFin 6 RF Port 2 23 VCC REFin 10,25 GND/NC or +3.6 V 24 Lock Detect 12 VCC Module 26 N/C/OPEN 14 N/C/OPEN 27 N/C/OPEN 15 N/C/OPEN 28 N/C/OPEN 16 N/C/OPEN Evaluation Board Optional Port* 5 Figure 15. Evaluation Board Dimension* 4 2018 TMYTEK. All rights reserved. 5

126.00 Datasheet Connectorized Package 57.13 26.13 Figure 16. Connectorized Package Dimension* 4 Document Notes: * 1 For quantities of 1 to 200 pieces. * 2 Based on 100 MHz REF CLK. * 3 Upgrade from SF to MF is not suitable for this service. * 4 Only one RF connector will be mounted depending on the output frequency unless otherwise requested. * 5 All dimensions are in millimeters unless otherwise specified. 2018 TMYTEK. All rights reserved. 6