Condensed Catalog Selection of Featured PEMKO Products
Commercial Thresholds Unless exact net cut is specified, thresholds less than 48" are supplied 1 2" over length, and thresholds 48" and over are supplied 1" over length to allow for fitting. Unless otherwise specified, all thresholds are pre-drilled on the center line and are supplied with fasteners. Extruded bronze (brass) thresholds are supplied with solid brass screws. For corrosive environments, stainless steel screws are available at an extra cost. vailable with PemKote non-skid coating. Please specify PemKote when ordering. Please furnish drilling instructions when ordering with PemKote as it is difficult to drill through. Saddle Thresholds 171_, B, BDG, D, G, SN 172_, SN 176_ 270_ 271_, SN 272_, SN 2548_ 2748_ 2749_ FINISHES FOR PRODUCTS SHOWN ON THIS PGE (see FULL LINE CTLOG or WEBSITE for finish chart) (Mill Finish luminum) K (Mill Finish luminum w/pemkote Non-Slip Coating) B (Mill Finish Extruded Bronze [Brass]) BDG (Bright Dip Gold nodized) D (Dark Bronze nodized) G (Gold nodized) SN (Satin Nickel nodized) NOTE: BDG, G, SN are available with limited inventory 5
Commercial Thresholds (C ont.) Stainless Steel Saddle Thresholds 154SS_ SS (#4 Finish) 175SS SS (#4 Finish) vailable in 36", 48", 72", and 98" lengths only. 253SSFG SS (#4 Finish) 1 2 (12.7) 3 1 16 (77.8) 252x3SSFG SS (#4 Finish) 1 2 (12.7) 5 (127.0) Heavy D uty Thresholds Ideal for heavy-duty, high-traffic and high weight-bearing applications, such as industrial facilities, schools, cafeterias, manufacturing buildings and hospitals Withstands coastal and high-humidity conditions Ultra-durable, extra thick extruded nickel-aluminum construction is guaranteed for ten (10) years 1715_, K, D 5 (127.0) 2715_, K, D 5 (127.0) 1 4 (6.4) Modular Heavy Duty Thresholds Modular construction without the expense of custom cast thresholds. There is no restriction on width additions (in 1" increments) 1716_, K, D llow 5 8" door clearance. 1717_, K, D llow 5 8" door clearance. FINISHES FOR PRODUCTS SHOWN ON THIS PGE (see FULL LINE CTLOG or WEBSITE for finish chart) (Mill Finish luminum) K (Mill Finish luminum w/pemkote Non-Slip Coating) D (Dark Bronze nodized) SS (Stainless Steel) 6
Commercial Thresholds (C ont.) Thermal Barrier Saddles Black rigid polypropylene key between extrusions provides a thermal barrier (designated by FG Frost Guard following finish code) 273x3_FG 273x4_FG 254x4_FG 255x5_FG 252x2_FG 252x3_FG 253x4_FG FINISHES FOR PRODUCTS SHOWN ON THIS PGE (see FULL LINE CTLOG or WEBSITE for finish chart) (Mill Finish luminum) B (Mill Finish Extruded Bronze [Brass]) D (Dark Bronze nodized) G (Gold nodized) NOTE: G is available with limited inventory 7
Door Bottoms utomatic Door Bottoms 4131_RL BDG, C, D, SN 4131_NBL BDG, C, D, SN 4301_RL C, D SURFCE MOUNTED SEMI- MORTISED SURFCE MOUNTED SEMI- MORTISED SURFCE MOUNTED SEMI- MORTISED 127 32 (46.8) 127 32 (46.8) 125 32 (46.0) 19 32 (15.1) Sponge EPDM (R) 19 32 (15.1) nylon brush (NB) 29 32 (23.8) Sponge EPDM (R) LTERNTE INSERTS FOR 4131 4131_PKL BDG, C, D, SN 4131_SL BDG, C, D, SN LTERNTE INSERT FOR 4301 4301_PKL C, D 4301_NBL C, D, 434_NBL 434_RL SURFCE MOUNTED SEMI- MORTISED 7 8 (22.2) 7 8 (22.2) 125 32 (46.0) 111 32 (34.1) 111 32 (34.1) nylon brush (NB) Sponge EPDM (R) 29 32 (23.8) nylon brush (NB) LTERNTE INSERT FOR 434 434_PKL FINISH: FINISHES FOR PRODUCTS SHOWN ON THIS PGE (see FULL LINE CTLOG or WEBSITE for finish chart) (Mill Finish luminum) BDG (Bright Dip Gold nodized) C (Clear nodized) D (Dark Bronze nodized) SN (Satin Nickel nodized) Special finishes available upon request. 11
Door Bottoms (Cont.) utomatic Door Bottoms 411_RL 420_PKL 411_NBL For hollow metal doors. Maximum drop is 1/2". Sponge EPDM (R) nylon brush (NB) LTERNTE INSERTS FOR 420 LTERNTE INSERTS FOR 411 411_PKL 420_VL 411_SL 420_SL coustic utomatic Door Bottoms: PDB Series NEW! U nique design creates uniform seal pressure across the entire door bottom resulting in superior acoustic performance P DB Series has sealed-in-place type performance, achieving zero drop in STC ratings in many typical wood and hollow metal door applications. Patent Pending djustment is 1/8" to 1/2". Maximum dimension from bottom of door to sealing surface is 1/2" Full-Mortise pplication Surface Mounted or Semi-Mortised pplication PDB411_E PDB4131_E 26" to 48" 9 C, D 26" to 48" 16 SURFCE MOUNTED (14.3) SEMIMORTISED 138 (34.9) 178 (47.6) EPDM (E) 9 16 (14.3) EPDM (E) 12
Door Bottoms (Cont.) Door Shoes Now available with PemkoPrene (PK) thermo-plastic elastomer, an excellent cold weather seal which stays flexible between -70 F and +250 F lso available with vinyl (V); both seals are the same shape and size Slotted holes for easy adjustment. Provided with stainless steel fasteners Rain drip model is ideal for deflecting rain away from the bottom of door 211_V 211_PK 215_V 215_PK, BDG, D, G, PW, SN 216HM_V 216HM_PK 113 16 (46.0) For hollow metal doors 217HM_V 217HM_PK 1 13 16 (46.0) For hollow metal doors 222_V 222_PK 2211_V 2211_PK Combination door shoe and kick plate with rain drip. 2170_V COLORS: D, W 36", 48" ll Vinyl For hollow metal doors with inverted bottom channel. 2173_V, BDG, D, G, PW lso available with unnotched insert: 2173_V36UN 2173_V48UN 1 1 16 (27.0) 1 3 4 (44.5) 15 16 (23.8) 11 16 (17.5) lso available with unnotched insert: 2170_V36UN 2170_V48UN 2343_V lso available with unnotched insert: 2343_V36UN 2343_V48UN 209_V 1 3 16 (30.2) 11 16 (17.5) 2230_NB 234_V 234_PK 1 5 16 (33.3) 1 1 8 (28.6) 3 4 (19.1) 11 16 (17.5) 3692_PK773 36", 48" FINISHES FOR PRODUCTS SHOWN ON THIS PGE (see FULL LINE CTLOG or WEBSITE for finish chart) (Mill Finish luminum) BDG (Bright Dip Gold nodized) D (Dark Bronze nodized) G (Gold nodized) PW (Painted White) SN (Satin Nickel nodized) 13
Door Bottoms (Cont.) Door Bottom Sweeps 315_N B, BGD, C, D, G, PW, SN 321_N C, D, G 3151_N FINISH: C, D, G 1 (31.8) 1 (25.4) 3452_NB BDG, C, D, G, PW, SN 345_NB, BDG, D, G, PW 345_V 345_PK, BDG, D, G, PW (Mill Finish luminum) B (Mill Finish Extruded Bronze [Brass]) BDG (Bright Dip Gold nodized) C (Clear nodized) D (Dark Bronze nodized) G (Gold nodized) PW (Painted White) SN (Satin Nickel nodized) stragals and Meeting Stiles Split stragals and Meeting Stile Gasketing stragals and meeting stiles with a fire label may be mounted on pairs of doors wherein the gap meets the requirements of NFP 80, The clearance between the meeting edges of doors swinging in pairs on the pull side shall be 1 8" ± 1 16" (3.18mm ± 1.59mm) for steel doors and shall not exceed 1 8" (3.18mm) for wood doors. When used as split astragals on double doors, two lengths must be ordered: one for each door Punched with slotted holes for adjustment ll clear anodized brush products are supplied with gray brush (available with black brush upon request) 297_S, BDG, D, G, PW, SN 303_S, BDG, C, D, G, PW, SN LTERNTE INSERTS 297_PK 297_V LTERNTE INSERTS 303_PK 303_V 29310_S C, D, G LTERNTE INSERTS 29310_PK 29310_P 29310_V (Mill Finish luminum) BDG (Bright Dip Gold nodized) C (Clear nodized) D (Dark Bronze nodized) G (Gold nodized) PW (Painted White) SN (Satin Nickel nodized) 14
stragals and Meeting Stiles (Cont.) 305_N B, C, D, G 18041_NB C, D, G, SN 313_N PEMKO offers a broad line of nylon brush weatherstripping including the 18062_NB and 18100_NB, which are suitable for split astragal applications. djustable stragals When used as split astragals on double doors, two lengths must be ordered: one for each door vailable in 84", 96" and 120" lengths 351 is surface applied NOTE: If you require split astragals in a metal-to-gasket configuration, you must order each leaf separately with your choice of insert. 351_/351_S LTERNTE INSERTS B, C, D, G 351_P 351_V 351_PK Overlapping stragals 355_S B, BDG, C, D, G, PW, SN LTERNTE INSERTS 355_V 355_P 356_V, BDG, D, PW, SN 357_ with S88_ SP, SS If specifications state that an astragal is required to satisfy a fire and / or smoke rated opening, then a thru-bolted 357SP or SS in conjunction with S88 seal is the only configuration that can be used. FINISHES FOR PRODUCTS SHOWN ON THIS PGE (see FULL LINE CTLOG or WEBSITE for finish chart) (Mill Finish luminum) B (Mill Finish Extruded Bronze [Brass]) BDG (Bright Dip Gold nodized) C (Clear nodized) D (Dark Bronze nodized) G (Gold nodized) PW (Painted White) SN (Satin Nickel nodized) SP (Galvannealed Steel) SS (Stainless Steel) 15
dhesive Gasketing MicroShield ntimicrobial Gasketing: Extruded from high-temperature silicone with MicroShield, a silver-based antimicrobial additive Effective between -58ºF and 450ºF dhesive Backed M44_ BL, C, D, W 17', 18', 20', 21', 25', 30', 510' Self-extinguishing and non-toxic Unaffected by sunlight, ozone and ultraviolet rays Exceeds the requirements for ntimicrobial Test JIS-Z-2801 M88_ NEW! BL, C, D, W 17', 18', 20', 21', 25', 30', 510' MicroShield s part of their promise to provide innovative solutions to their customers, certain SS BLOY Group brands offer the MicroShield technology, a silver-based antimicrobial additive designed to inhibit the growth of bacteria. MicroShield is a registered trademark of Yale Security Inc., an SS BLOY Group company. SiliconSeal - dhesive Backed Fire/Smoke Gasketing S44 is designed for tighter frames and demonstrates extremely low closing force S44_ BL, D, GR, W 17', 18', 20', 21', 25', 30', 510' S77_ BL, C, D, W 17', 18', 20', 21', 25' S88_ BL, C, D, GR, TN, W 17', 18', 20', 21', 25', 30', 204', 510' S773_ BL, D, GR, W 17', 18', 20', 21', 25', 30', 250' S771x6_ NEW! BL, C 7, 8, 10, 17, 18, 20, 21, 25 Designed for hollow metal and wood meeting stile applications Seal begins compressing at 5 16"; compresses to seal up to a 1 16" gap S776_ NEW! BL 17', 18', 20', 21' Designed for hollow metal and wood meeting stile applications Seal begins compressing at 3 8"; compresses to seal up to a 1 16" gap 5 16 (7.9) 1 (25.4) FINISHES FOR PRODUCTS SHOWN ON THIS PGE (see FULL LINE CTLOG or WEBSITE for finish chart) BL (Black) C (Clear) D (Dark Brown) GR (Gray/Light Gray) TN (Tan) W (White) 20
dhesive Gasketing (Cont.) PemkoPrene - dhesive Backed Fire/Smoke Gasketing PK33_ BL, D, W 17', 18', 20', 21', 25', 30', 510' PK55_ BL, D, W 17', 18', 20', 21', 25', 30', 510' PemkoPrene Hot Smoke Seal Edge Sealing for Category B Doors HSS1000_ is a non-adhesive backed (mortise applied) intumescent HSS1000_ Graphite (no code), W 7', 8', 10', 18', 21', 24' Hot Smoke Seal /SiliconSeal Combination Fire/Smoke Gasketing HSS2000xS44 BL, D, W 18, 20, 21, 24 HSS2000_ Graphite (no code), W 7', 8', 10', 18', 21', 24' HSS2000xS88_ BL, C, D, GR, TN, W 18, 20, 21, 24, 30' dhesive stragal/meeting Stile Seals S771_ BL, C, D, GR, W 7', 8', 9', 10' S772_ BL, D, W 7', 8', 10' Specialized Products Privacy Door Latch Easy to install, simple to operate D compliant Enhanced room privacy UL classified as a fire door accessory PDL_ 3 (Polished Brass), 4 (Satin Brass), 10B (Dark Bronze), 26 (Polished Chrome), 26D/15 (Satin Chrome/Nickel) 3 2 16 (55.6) 1 1 2 (38.1) 5 1 8 (41.3) 87 Privacy Door Latch Bracket For use on Dunbartan, Reddiframe, and Timely Frames Powder Coated PDLBRKT_ COLORS: OW (Off White), DB (Dark Brown) FINISHES FOR PRODUCTS SHOWN ON THIS PGE (see FULL LINE CTLOG or WEBSITE for finish chart) Gasketing: BL (Black) C (Clear) D (Dark Brown) GR (Gray/Light Gray) W (White) Thresholds: BL (Black Vinyl) 21