Ethicon Open Stapling A solution for every staple line

Similar documents
Ethicon Open Stapling A solution for every staple line

STAPLING SOLUTIONS FOR CHALLENGING APPLICATIONS. Stapling Product Catalogue 2016

Citation The Journal of surgical research (2.

Tianjin Onehealth Medical Instruments. Onehealth Your surgical solutions partner

THE FUTURE OF STAPLING IS IN YOUR HANDS. Signia Stapling System In-Service Guide

DSL# EC 2009 Ethicon Endo-Surgery. All rights reserved PRODUCT CATALOG

ADVANCES IN LAPAROSCOPIC COLORECTAL SURGERY USING HARMONIC TECHNOLOGY CHARLES E. SCHMIDT COLLEGE OF SCIENCE BOCA RATON, FL April 23, :00:08

Takeshi Omori, Jeong-Ho Moon, Kazuyoshi Yamamoto, Yoshitomo Yanagimoto, Keijirou Sugimura, Hiroshi Miyata, Masahiko Yano, Masato Sakon

STRENGTH Aligned teeth provide superior gripping power over standard vertical teeth. STRENGTH Diamond serrated jaws provide a firm grip

How to use loppers Muddy Faces Ltd

AirBorn Inc. Product Technical Bulletin #31

Universal Humeral Nail

Horizon. Your innovative partner in medicine technology.

ELVAREX CUSTOM MADE MEASURING INTRODUCTORY WORKSHOP

SCANLAN LEGACY. High Precision Titanium Instruments

Application Tooling Specification Sheet

Technique Guide. Cable System. For Orthopaedic Trauma Surgery.

The jigs and fixtures are the economical ways to produce a component in mass production system. These are special work holding and tool guiding device

Instructions for Use. LCP Locking Compression Plate. Combine without Compromise.

Technique Guide. 2.4/2.7 mm Locking Tarsal Plates. Talus Plate, Navicular Plate and Cuboid Plate.

HAND CRIMP TOOL SPECIFICATION SHEET Order No

VA L U E A N A LY S I S B R I E F

MIS TECHNOLOGY GUIDE READ PRODUCT INSERT THOROUGHLY BEFORE USE

RATCHET CABLE CUTTER

SR2. Rotative blowing for large mass productionof packagings from 0,1 L to 2 L

Mechanical Vice Grips. Mechanical Wedge Action Grips

Integra. Capture Screw System SURGICAL TECHNIQUE

Drawing. Fig. 1 Drawing

FITTING INTRODUCTION:

HAND CRIMP TOOL SPECIFICATION SHEET Order No

Module 3 Selection of Manufacturing Processes

Practical Bolting and Gasketing for the Non Standard-Flanged Joint

STRONGMAN TOOLS SCROLL BENDERS

WHEN IT COMES TO SUTURING, EXPERIENCE MATTERS.

HAND CRIMP TOOL Operating Instruction and Specification Sheet Order No (CR60622B)

VariAx DistalFibula. Foot & Ankle. Locking Plate System. Operative Technique

HAND CRIMP TOOL Operating Instruction and Specification Sheet Order No (CR6115B)

Javelin Integra Inspired Design Precision Engineering

Manual Carton Closing Staplers

Suturing simplified. The first and only reusable, articulating, curved needle driver.

Joining Metals with Stamping Dies

MANUFACTURING TECHNOLOGY

MANUFACTURING TECHNOLOGY

WHEN IT COMES TO SUTURING, EXPERIENCE MATTERS.

Joining Metals with Stamping Dies

MANUFACTURING PROCESSES

The Kruger Eccentric

Design, Build and Upholster a Custom Chair

instruments APEX SERIES INSTRUMENTS: OVERVIEW

LEG CURL IP-S1315 INSTALLATION INSTRUCTIONS

The use of sutures and ligatures is an integral part of surgical procedures. Being proficient in suturing and ligating will not only make your

Vario Tec jaws Page 128. Vario Tec accessories Page 129. Super Vario vice Page 132. Grip Fix. Makro Grip. Quick Point. Quick Tower.

DRILL GRINDING ATTACHMENT

(12) Patent Application Publication (10) Pub. No.: US 2009/ A1

Cable System. For Orthopaedic Trauma Surgery.

Clamps. Preformed Clamping Systems. Clamps. Band-It. Band-It

GET MORE. WITH LESS. Less sticking. 1, Less cleaning. 2, Less eschar buildup. 2, More benefits. LigaSure Maryland jaw device with nano-coated jaws

HAND CRIMP TOOL SPECIFICATION SHEET Order No (Replaces (HTR1031E) And (HTR1031E1))

Integra. Stainless Headed Compression Screw System SURGICAL TECHNIQUE

Hand Crimping Tools , , and AUG 12 Rev D

1. Layout. Step 1. Step 2. Step 3. Fig. 1

Apex & HA Apex Pins. Pin Fixation System. Half Pins, Transfixing Pins HA Coated Half Pins for long term fixation Instruments

Digital Compression Screw

ALAN CARTER STUDIO 7 Cane Creek Circle, Fairview, NC

OPERATIVE TECHNIQUE RIVAL VIEW PLATING SYSTEM. foot & ankle reconstruction procedures

KEEP FOR FUTURE REFERENCE STOWAWAY TILT TABLE READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS TABLE

SW Region Asset Specifications: Four Strand Barbed Wire Fence Specifications

Cerclage Passer. For minimally invasive application of cerclage cables.

Profitable Folding. Folding unit M 7 M 8. Folding unit

MBM Sprint 3000 Booklet Maker

Dental Sutures. Japanese quality for best results.

3.5 mm/ 2.7 mm LCP. PanCarPaL arthrodesis S PLate. BroCHUre. For treatment of carpal joints in dogs

Transform Cable Rail MUST be installed on 4" x 4" wooden posts sleeved with Transform post sleeves to support cable tension!

HC Hydraulic Expansion Chucks

GYN Scissors - Z-Type Hysterectomy & Parametrium

LCP Pilon Plate 2.7/3.5

Hardened Structures Hardened Shelters, LLC. Explosion Resistant Pre-hung Sealed Blast Door

SINUMERIK live: turning technologies longitudinal turning and plunge-turning. Differences and use with SINUMERIK Operate

Patent pending. Product Manual

MANUAL PLASTIC STRAPPING TOOL MODEL P404

Alligator Staple Fastening System

2.0. Contents Function control

Table saws are not recommended for cutting sheets larger than 4'X4' I size.

Application Tooling Specification Sheet

Small Plate and Screw System SURGICAL TECHNIQUE

Cable & Bolt Cutters. F o r P. r o f e. s s i o. n a l s. .. S i. n c e 1

PORTABLE PULLER 55 Ton Capacity

A Rugged and Durable Splice that is Easy to Install

Corso di Studi di Fabbricazione

Chapter 24. Machining Processes Used to Produce Various Shapes: Milling

DIY RUSTIC HALL TREE

LCP Pilon Plate 2.7/3.5

Constructing Wire Fences

MTP Fusion Surgical Technique

Building an Unfeathered Paddle with a Wood Shaft and Carbon Fiber Blades

TORNIER MAXLOCK EXTREME. Clavicle Plating System SURGICAL TECHNIQUE

TYPE 3740XL EXTRA LARGE WET RUNNING CARTRIDGE SPLIT SEAL

PLATE LIFTING CLAMPS

Pliers. Pliers PLIERS

Design for Fixture Guidelines. Conventional, Metrix, LaserWire, and Zoom or Tilt In-Circuit Test Fixtures

Transcription:

Ethicon Open Stapling A solution for every staple line Open Right Colectomy 1. Use the PROXIMATE Linear Cutter to transect the proximal and distal ends of the specimen 2. Perform a side to side anastomosis with the 3. Close the enterotomy using the PROXIMATE Reloadable Linear Stapler Open Left Colectomy / Sigmoidectomy 1. Transect the left or sigmoid colon using the 2. Create a side-to-side anastomosis with the 3. Use the PROXIMATE Reloadable Linear Stapler to close the enterotomy Open Low Anterior Resection 1. Transect the proximal end of the specimen with the 2. Use the CONTOUR Curved Cutter Stapler to transect the distal end of the rectum 3. Create the end to end anastomosis using the Ethicon Circular Stapler Ethicon Colorectal Solutions

Ethicon Circular Staplers The most chosen Circular Stapler for colorectal anastomoses 1 with controlled tissue compression and Adjustable Height Staple Technology to promote conditions for healing* Continuously smooth anvil shaft creates less excess tissue draw during anvil closure 2,3 Fixed anvil design causes less tension on the anastomosis with less strain on the staple line during opening 4,5 ECHELON CIRCULAR Powered Stapler* Delivers 61% fewer leaks at the staple line without compromising perfusion 6 Produces more evenly distributed compression & reduces potential leaks paths. 7 With Gripping Surface Technology provides gentler handling with a 33% reduction in compressive forces on tissue 8 *Compared to Medtronic DST Series EEA Stapler CONTOUR Curved Cutter Stapler Curved to go deep Unique curved head designed to cut and staple deep in the pelvis More precise transection Parallel closure and tissue retention pin provides 78% less tissue slippage during firing compared to Covidien EndoGIA Radial Reload with Tri-Staple Technology 9 PROXIMATE Linear Cutter Superior staple formation 51% fewer malformed staples than DST Series GIA (GIA8038S) 10 Controlled compression With its unique CAM Mechanism and tissue retention pin is designed to deliver controlled tissue compression from thin to thick tissue PROXIMATE Reloadable Linear Stapler Consistent staple formation Parallel jaw closure is designed to help compress tissue evenly within the jaws of the instrument for consistent staple formation 1. US DRG dollar share data from 2014-2015 for circular stapler product codes. 2. Benchtop testing on porcine jejunum, comparing mean tissue draw during anvil closing of the Ethicon CDH25P and Medtronic EEA2535. 0.01cm vs 1.762cm, p=0.001. 3. Benchtop testing on porcine jejunum. Comparing mean tissue draw during anvil closing of the Ethicon Circular Stapler (CDH25A) and the DST Series EEA circular stapler (EEA2535). 0.437cm vs 1.708cm, p<0.05. 4. Benchtop testing on porcine jejunum, comparing mean tissue stretch during anvil opening after firing of the Ethicon CDH25P and the Medtronic EEA2535. 1.148cm vs 1.832cm, p=0.0 5. Benchtop testing on porcine jejunum. Comparing mean tissue stretch during anvil opening after firing of the Ethicon Circular Stapler (CDH25A) and the DST Series EEA circular stapler (EEA2535). 1.558cm vs 2.228cm, p<0.05. 6. Benchtop testing in porcine tissue at 30mmHg (26mmHg average pressure experienced during intra-operative leak test), comparing Ethicon CDH29P to Medtronic Covidien EEA2835, p<0.001. 7. Staple line analysis in benchtop testing, comparing Ethicon CDH25P to Medtronic EEA2535. 8. Benchtop testing on porcine jejunum, comparing mean tissue stretch during anvil opening after firing of the Ethicon CDH25P and the Medtronic EEA2535. 1.148cm vs 1.832cm, p=0.0. Benchtop testing on porcine colon, comparing Ethicon CDH29P to Medtronic EEA2835, p<0.001. 9. Benchtop testing on porcine rectum. Normalized mean tissue movement along the cut line from before clamping on tissue to after firing the CONTOUR Curved Cutter Stapler (CS40G) vs ENDO GIA ULTRA Handle (EGIAUSTND) and Endo GIA Radial Reload with Tri-Staple Technology (EGIARADMT) on 2.1mm to 2.9mm thick tissue. (9.4%) vs 17.4mm (32.5%), p<0.001. 10. Benchtop testing in porcine tissue vs DST Series GIA (GIA8038S), Frankenman LC80B, Reach RLC8038S and Touchstone LC8038 at 2mm-5mm thickness range (p<0.001).

Ethicon Endoscopic Circular Stapler Device code Diameter Cartridge Staple type # of staples Open staple leg length Compressed tissue thickness* Qty/box ECS21A 21mm Standard flat deck B-form 16 5.5mm 1.0 2.5mm 3 ECS25A 25mm Standard flat deck B-form 20 5.5mm 1.0 2.5mm 3 ECS29A 29mm Standard flat deck B-form 24 5.5mm 1.0 2.5mm 3 ECS33A 33mm Standard flat deck B-form 28 5.5mm 1.0 2.5mm 3 Ethicon Curved Open Circular Stapler Device code Diameter Cartridge Staple type # of staples Open staple leg length Compressed tissue thickness* Qty/box CDH21A 21mm Standard flat deck B-form 16 5.5mm 1.0 2.5mm 3 CDH25A 25mm Standard flat deck B-form 20 5.5mm 1.0 2.5mm 3 CDH29A 29mm Standard flat deck B-form 24 5.5mm 1.0 2.5mm 3 CDH33A 33mm Standard flat deck B-form 28 5.5mm 1.0 2.5mm 3 CONTOUR Curved Cutter Stapler Device code Tissue Staple rows Cut line length Staple line length Max firings Qty/box CS40B 4 40mm 51mm 6 3 CS40G 4 40mm 51mm 6 3 Reload code Tissue Closed staple height Open staple height Wire diameter Qty/box CR40B 3.5mm 6 CR40G 4.7mm 6 PROXIMATE Linear Cutter Description Device code Tissue Staple rows Cut line length Staple line length # of staples Max firings Qty/box 55mm TVC55 TLC55 TCT55 Vascular/Thin 4 53mm 57mm 56 8 3 75mm TLC75 TCD75 TCT75 / 4 73mm 77mm 76 8 3 *1.0mm compressed tissue thickness provides closed staple height

Description Device code Tissue Staple rows Cut line length Staple line length # of staples Max firings Qty/box 100mm TLC10 TCT10 4 98mm 102mm 100 8 3 Description Reload code Tissue Closed staple height Wire diameter Open staple height Qty/box 55mm Reload TVR55 TCR55 TRT55 Vascular/Thin 1.0mm 2.6mm 75mm Reload TCR75 TRD75 TRT75 / 1.8mm 4.2mm 100mm Reload TCR10 TRT10 PROXIMATE Reloadable Staplers Description Device code Tissue Staple rows Staple line length # of staples Max firings Qty/box 30mm Stapler Vascular TX30V Vascular 3 30mm 23 8 3 30mm TX30B TX30G 2 30mm 11 8 3 60mm TX60B TX60G 2 60mm 21 8 3 Description Reload code Tissue Closed staple height (mm) Wire diameter Open staple height Qty/box 30mm Reload Vascular XR30V Vascular 1.0mm 2.4mm 30mm Reload XR30B XR30G 0.27mm 3.6mm 4.7mm 60mm Reload XR60B XR60G 0.27mm 3.6mm 4.7mm

How to Order All purchase orders are made to Johnson & Johnson Health Care Systems, Inc. (JJHCS) or your authorized distributor. Electronic Ordering Options (Note: Placing orders electronically avoids minimum order fees for your hospital.) Johnson & Johnson Gateway: www.jnjgateway.com/commerce For questions about your order, visit the website or call 1-866-JNJ-GATE (565-4283). Global Healthcare Exchange (GHX): www.ghx.com For questions about your order, visit the website or call 1-800-YOUR-GHX (968-7449). Electronic Data Interchange (EDI): JJHCS EDI Help Line: 1-800-262-2888 Customer Support For product use assistance, clinical guidelines, service and repair, emergency assistance, copy of a 510(k) clearance letter or complaints, please contact our Customer Support Center at customersupport@eesus.jnj.com or by calling 1-877-ETHICON (384-4266). Our Support Center is staffed 24 hours a day, 7 days a week by qualified nurses to answer your product-related questions. Nonelectronic/Manual Ordering Options Call JJHCS at 1-800-255-2500 between 8:30 a.m. and 9:00 p.m. Eastern Standard Time or fax your order to 1-732-562-22. For complete product information, including full steps for use, indications, contraindications, warnings and precautions, please see Instruction for Use. 2018 Ethicon US, LLC. All Rights Reserved. 076700-180213