PLASTIC CHAIN Ultra Low Friction Series TTP & TPH Staiinlless Steell Piin Chain Marketing Dept.
TSUBAKIMOTO CHAIN CO. Plastic Chain series expansion Tsubakimoto s Plastic Chain series has been further expanded with the introduction of the Ultra Low Friction specification (). This specification has been released for use with the Stainless Steel Pin use TTP and TPH models. The coefficient of friction has been reduced by 15% ~ 30% compared to the previous MW specification (For dry conditions). This Ultra Low Friction function, which was previously unavailable, is particularly suitable for use in the wide range of areas that have problems with slip functioning. With this product expansion, use and operation for customers is even further improved. Attention: The link material of the Ultra Low Friction Specification () has been combined with a silicon-based lubricant. Please do not use in printing processes as there is a concern of smearing of printed matter. TTP-D Type *Width 82.6mm 1143mm With the sales release of the series comes the addition to the main model, TTP, of TTP-D type. (Plastic Pin and Stainless steel Pin specifications can be produced) TTP-D type can also be produced for specifications other than Ultra Low Friction. (Refer to Page 2.) Feature 1 Plate chamfering reduced to lessen space between plates. Less chamfering Suitable for conveying plastic bottles with rounded bases Feature 2 D type connecting pin has been adopted. More reliable than knurled pin against slipping out. Recommended applications Wrapping machine feeders Single strand lines Accumulators
TSUBAKIMOTO CHAIN CO. Model Identification TTP 826 D - Ultra Low Friction Series D Type Pin (For Plastic Pin PD) Plate width: 82.6mm Model type TPH 830 - Ultra Low Friction Series Model type Plate width: 83.0mm For Plastic Pin TPH830P- Products TTP-D- Series Model Top Plate XW Approx. Mass (kg/m) TTP 826D- 82.6 0.9 TTP 1143D- 114.3 1.0 Color: Light Blue Pin: 18-8 Stainless steel D Pin Operating temperature: -20 ~ 80 o C Reverse bending radius: R= 30mm
TSUBAKIMOTO CHAIN CO. TPH830- Color: Light Blue Pin: 18-8 Stainless steel D Pin Hole ratio: Approx. 10% Approx. Mass: 1.0kg/m Operating temperature: -20 ~ 80 o C Reverse bending radius: R= 35mm Sprocket and Running rail positioning Special material correspondence A = Sprocket pitch 2 + 4 The above chains can also be produced in the materials below. Please contact your nearest sales office. Specifications! Standard! Low Friction (MWB, MWG)! Anti-static (SE)! Antibacterial/Anti-mold Low friction (MWS)! Electro-Conductive (E)! Chemical resistant (Y)! Acid resistant (AR)! High Friction (HF)! Matt finish! Ultra-violet resistant
Coefficient of Friction TSUBAKIMOTO CHAIN CO. Table 1 Coefficient of Friction of Slip of Chain and other material Chain Lubrication Material MW conditions (Low Friction) (Ultra Low Friction) (MWB, MWG, MWS) Standard P Plastic rail (New light) Dry 0.15 0.18 0.25 M Plastic rail, A Plastic rail Soapy water, Oil 0.11 0.12 0.12 Steel and Dry 0.14 0.17 0.25 Stainless steel rail Soapy water, Oil 0.11 0.12 0.15 Metal cans Dry 0.14 0.17 0.25 Soapy water, Oil 0.11 0.12 0.12 Glass pin Dry 0.10 0.12 0.22 Soapy water, Oil 0.10 0.12 0.12 Plastic containers Dry 0.13 0.16 0.25 Soapy water, Oil 0.11 0.15 0.15 Paper packs Dry 0.18 0.25 0.30 Soapy water, Oil 0.12 0.20 0.20 Coefficient of Friction values are from company data. M Plastic rail and A Plastic rail are specialized for dry conditions. P Plastic rail is recommended for conditions where lubricant is present. * New light is a registered trademark of Saxin Corporation Ltd. (Currently being handled by Tsubakimoto Chain.) Allowable Tension graphs The Plastic chain specification is the result of the pursuit for further improvements in Low Friction. Compared to the previous specification MW (MWB & MWG), Maximum allowable tension is 30% less. Although the strength lessening is roughly the same and friction resistance also dropped (Drop in effective tension) there is no concern when replacing the previous specification. For effective tension calculation please refer to the Tsubaki Top Chain catalogue and General catalogue. TTP-D- TPH830 (SUS304: D Pin) (SUS304: D Pin) Maximum Allowable Tension Temp: -20 ~ 40 o C Temp: 40~ 60 o C Temp: 60~ 80 o C Maximum Allowable Tension Temp: -20 ~ 40 o C Temp: 40~ 60 o C Temp: 60~ 80 o C Chain speed (m/min) Chain speed (m/min)
Parts TSUBAKIMOTO CHAIN CO. Sprocket TTP type can use the TTP specialized sprocket as is. For TPH type, please use the conveyor component (Part 200) sprocket or the TTUP sprocket. Running rail Under dry conditions when there is no lubrication, so as to control wear dust as much as possible, please use the M Plastic rail, A Plastic rail or a metal made rail. Under wet conditions with lubrication, please use the P Plastic rail (New light). Return roller As the specification has excellent slip functioning, this may affect the rotation of the return roller. When the return roller s rotation is not smooth, wear dust may occur or wavelike wear may occur on the surface of the Top plate. Please use the IR60 Inside roller under dry conditions with no lubrication or Part 11 roller under wet conditions with lubrication. * Please refer to the related catalog (Following section) for these parts. Other Series (For more details regarding individual product dimensions please refer to the product s catalog) Plastic Top Chain Straight Line Curved Line Product type TTP (Plastic pin) TPH (Plastic pin) TTUP (Stainless steel pin only) TTP 826 PD- TPH 830 P- TTUP 826 TPU 826 Model No. TTP 1143 PD- TTUP 143 TTUP 1905 All pins are D pin type. (* Knurled pin cannot be used with TTP type) TPU (Stainless steel pin only)
Beltop Chain Product Model No. TSUBAKIMOTO CHAIN CO. BTC type (Closed type) BTO type (Open type) BTN type (Net type) BTC8 type (Closed type P: 25.4) BTC 762 BTO 762 BTN 762 BTC8-762 BTC 1524 BTO 1524 BTN 1524 BTC8-1524 BTC 2286 BTO 2286 BTN 2286 BTC8-2286 BTC 3048 BTO 3048 BTN 3048 BTC8-3048 BTC 3810 BTO 3810 BTN 3810 BTC8-3810 BTC 4572 BTO 4572 BTN 4572 BTC8-4572 BTC 5334 BTO 5334 BTN 5334 BTC8-5334 BTC 6096 BTO 6096 BTN 6096 BTC8-6096 BTC 6858 BTO 6858 BTN 6858 BTC8-6858 BTC 7620 BTO 7620 BTN 7620 BTC8-7620 BTC 8382 BTO 8382 BTN 8382 BTC8-8382 BTC 9144 BTO 9144 BTN 9144 BTC8-9144 BTC 9906 BTO 9906 BTN 9906 BTC8-9906 BTC 10668 BTO 10668 BTN 10668 BTC8 10668 BTC 11430 BTO 11430 BTN 11430 BTC8 11430 BTC 12192 BTO 12192 BTN 12192 BTC8 12192 BTC 12954 BTO 12954 BTN 12954 BTC8 12954 BTC 13716 BTO 13716 BTN 13716 BTC8 13716 BTC 14478 BTO 14478 BTN 14478 BTC8 14478 BTC 15240 BTO 15240 BTN 15240 BTC8 15240 BTC8 type can also be produced with any anti-snaking attachment. BTO8 type (Open type P: 25.4) B TO8-830 Chain diameter greater than 15240 (152.4mm) ca be produced, please contact your nearest sales office. Mini Plastic Chain Chain model No. MP4 type (P: 12.7) MP4-500
RS Plastic Chain TSUBAKIMOTO CHAIN CO. Straight line Curved line Product RS-P* RS-P-2 RS-PU RS-PU-2 Model No. RS40P- RS60P- RS60P-2 RS60PU- RS60P-2 Pin material is SUS type only and Pin type is D Pin only. (* Knurled pin cannot be used with RS-P type.) Mini Plastic Top Chain Straight line Curved line Product MTP-T type MTPU-T type Model No. MTP826T- MTPU826T- Pin material is SUS type only and Pin type is D Pin only.