INDUSTRIAL & OEM PRIMER AND TOPCOAT PRODUCT INFORMATION

INDUSTRIAL & OEM PRIMER AND TOPCOAT PRODUCT INFORMATION Harrison Paint Company 1329 Harrison Avenue SW Canton, Ohio 44706 U.S.A. (800) 321-0680 Fax (330) 454-1750

PRIMERS 961 LINE SHOPCOAT PRIMER GRAY, RED OXIDE, OFF WHITE, BLACK LOW ODOR ALKYD SHOPCOAT WATER REDUCIBLE ALKYD GRAY, RED OXIDE, OFF WHITE, BLACK GRAY, RED OXIDE, OFF WHITE, BLACK 941-88 EPOXY ESTER METAL PRIMER YELLOW OXIDE 939-88 EQUIPMENT ENAMEL PRIMER GRAY 611 PREMIUM ALKYD METAL PRIMER GRAY, RED OXIDE, WHITE 611-88 GALVANIZED METAL PRIMER WHITE 3730 POLYAMIDE EPOXY PRIMER OFF WHITE 3386 ZINC PHOSPHATE PRIMER GRAY/GREEN 622 ACRYLIC METAL PRIMER GRAY, RED OXIDE, WHITE

COATINGS FOR THE STEEL FABRICATING INDUSTRY We ve been manufacturing quality paints and finishes for the steel industry since our inception in 1911. Order stock product by noon, receive the next business day We match custom colors at no charge Our coatings go through rigorous testing and QC before they are put into the field to assure you are getting the best product that perfectly fits your needs. We ll even do custom batches of as little as 50 gallons if you need a special paint for a special job..from a safety blue shop coat primer to a GM approved Direct to Metal topcoat, even exact gloss levels or viscosity We make round pegs for round holes, don t settle for fitting your production around your paint suppliers options tell us what you need and we ll design it for you, at no extra charge! Being a regional manufacturer allows us to react quickly to your special needs as well as providing personal and professional assistance with all your coating requirements. We supply any type coating you may need; water based, water reducible alkyd, solvent based, solvent & water based epoxy, solvent and water based urethanes. We can match colors from competitors, customers specs, RAL, Munsell, Fed Spec, Pantone, automotive industry, OSHA Prepaid shipping on as little as 24 gallons We also stock a full line of spray tips, guns & parts as well as safety equipment, masking products and solvents We fill as few as 1 custom spray can for touch ups PRIMERS 961 Line Shop coat- Economical quick dry alkyd field primer. VOC compliant for shop application, available in gray, brown oxide, black, buff, off white & custom colors. 963 Line Shop coat Practically odorless quick dry alkyd shop primer, VOC compliant for shop or field application. Can topcoat with most strong solvent based finish even up to most 2k urethanes. Available in gray, brown oxide, black, off white & custom colors. High Solids. 919 Line Universal Primer Quick drying solvent based primer, VOC compliant for shop or field application. Resistant to most all strong solvent topcoats. Available in gray, brown oxide & white. 970 Line Water Reducible Alkyd Shop coat The ease and cost effectiveness of soap and water clean up, the toughness of an alkyd resin make this an excellent choice. VOC complaint for shop and field application. Available in gray, brown oxide, off white, black and custom colors. 909 Line Polyamide Epoxy Primer 2 component (1 to 1) high solids epoxy primer for use in severe chemical applications. VOC compliant for shop application. Available in gray & off white. 933 Primer Surfacer Single component solvent based quick dry primer that not only primes, but fills minor imperfections, dings and scrapes in your steel. Available in gray or custom colors. 939 Fleet Primer Single component red oxide solvent quick dry for use under automotive finishes as well as truck frames and undercarriages 941 Line Epoxy ester Primer Quick drying, single component epoxy primer for use on snow plows, salt-water shipping containers and others where protecting steel from salt is important. Available in yellow oxide or custom colors. 1329 Harrison Avenue SW Canton, Ohio 44706 951 Line Fast Dry 1k solvent dries in minutes and can be top coated with strong solvent topcoats very quickly, including 2k urethanes and quick dries. 999 MCU A micaceous iron oxide primer for severe use applications under any topcoat 1-800-321-0680 Fax 1-330-454-1750 www.harrisonpaint.com www.excelsiorcoatings.com

Technical Data Sheet Product #: Product Name: Description: 961-72 (Gray) 961-74 (Brown Oxide) Alkyd Shop Primer A high solids, solventborne primer exhibiting fast air drying characteristics and very low VOC for a solvent thinned coating. Designed for use on interior and exterior metal surfaces. Suitable for topcoating with various solvent and waterborne systems including alkyd and latex. Ideal for use in fabrication shops and on structural steel and aluminum. Dries for handling or topcoating in two hours under normal conditions. Properties: Physical: Application: Viscosity: 85-90 KU Viscosity: Weight/Gallon: 11.1 +/- 0.5 Lbs. Reduction: None Gloss: Flat Application Method: Airless spray/hvlp spray Weight Solids: 60% +/- 2.0 Volume Solids: 38% +/- 2.0 Clean-up: Mineral spirits/xylene VOC (theo.): Less than 3.2 Lbs/Gal. Coverage (sq. ft./gallon): 275-350 (Less than 380 grams/liter) Wet Film Thickness: 4.5-5.8 mils Dry Film Thickness: 1.7-2.2 mils Flash Point: (Setaflash) 68 o F Dry to Touch: 15-30 min. Storage: 1 year unopened container Dry to Recoat/Topcoat: 2 Hours at 77 o F Dry Hard: 16-24 Hours Note: Drying times are at 77 o F and 50% RH. Cool temperatures, high humidity, poor ventalition or heavy film thicknesses will extend dry times. Notes: May be topcoated with conventional and high solids oil base and latex coatings that do not contain strong solvents. Not designed for immersion. May be brush or roller applied to small areas. Surfaces to be painted must be clean and free from dirt, grease, oil, mill scale, rust and any other foreign matter by solvent wiping, hand or power tool cleaning. Do not apply at temperatures below 35 o F. Also available in 196-3548 (Off White) and 196-3549 (Black) by special order. The information and data given herein are based upon tests and reports considered reliable and believed to be accurate. However, due to circumstances beyond our control including but not limited to surface preparation, application technique, substrate and curing conditions, no guarantee of duplicate performance, expressed or implied, is made. Date of Preparation: 5/12/04 Harrison Paint Company, 1329 Harrison Ave SW, Canton, OH 44706 Ph: (330) 455-5125 Fax: (330) 454-1750

Technical Data Sheet Product #: 963-02 Black 963-72 Gray 963-73 Off White 963-74 Brown Oxide Product Name: Description: Alkyd Shop Primer A high solids, solventborne primer exhibiting fast air drying characteristics and very low VOC for a solvent thinned coating. Designed for use on interior and exterior metal surfaces. Suitable for topcoating with various solvent and waterborne systems including alkyd and latex. Ideal for use in fabrication shops and on structural steel and aluminum. Dries for handling or topcoating in two hours under normal conditions. Properties Properties listed are for 963-72. Properties of other products within the line will be similar but may not be exactly the same. Physical: Application: Viscosity: 75-78 KU Viscosity: As is Density (lbs/gal): 11.8 +/- 0.25 Reduction: None Gloss: Flat Reducer: None Weight Solids: 77% +/- 2.0 Application Method: Airless Spray / HVLP Spray Volume Solids: 57% +/- 2.0 Cleanup: VM&P Naphtha / Xylene Flash Point ( o F): 70 (Setaflash) Coverage (sq. ft./gallon): 350-450 (excludes spray loss) VOC (grams/liter): Less than 340 Wet Film Thickness (mil): 3.5-4.5 (lbs/gal): Less than 2.8 Dry Film Thickness (mil): 2.0-2.5 Storage: Store at 60-80 o F in a dry Dry to Touch: 20-30 minutes place out of direct sunlight Dry to Recoat/Topcoat: 2 hours Dry Hard: 16-24 hours Shelf Life: One year minimum in Note: Drying times are at 77 o F and 50% RH. Cool temperatures, high unopened container at 77 o F humidity, poor ventilation or heavy film thicknesses will extend dry times. Notes: Not designed for immersion. May be brush or roller applied to small areas. Do not apply at temperatures below 35 o F. KEEP OUT OF REACH OF CHILDREN! Rev. 3/16/11 The information and data given herein are based upon tests and reports considered reliable and believed to be accurate. However, due to circumstances beyond our control including but not limited to surface preparation, application technique, substrate and curing conditions, no guarantee of duplicate performance, expressed or implied, is made. Harrison Paint Company 1329 Harrison Avenue SW, Canton, OH 44706-1596 330-455-5125 Fax 330-454-1750 Per Gal

Technical Data Sheet Product #: 941-88 Product Name: Description: 1K Epoxy Metal Primer - Yellow A one component, fast air drying, corrosion resistant, solventborne paint designed to prime properly prepared metal surfaces. Formulated with epoxy ester resin for added toughness and chemical resistance. Properties: Physical: Application: Viscosity (#2 Zahn Cup): 50-55 seconds Viscosity: As is Weight/Gallon (lbs./gal.): 9.5 +/- 0.25 Reduction: Apply without thinning Gloss (at 60 o ): 10% Reducer: None Weight Solids: 49% +/- 2.0 Application Method: Spray Volume Solids: 33% +/- 2.0 Cleanup: Xylene VOC (theoretical): 575 grams/liter 4.8 lbs./gal. Coverage (sq. ft./gallon): 400-550 Flash Point: 45 o F Wet Film Thickness: 3.0-4.0 mils Storage: Store at 60-80 o F in a dry Dry Film Thickness: 1.0-1.3 mils place out of direct sunlight. Dry to Recoat: 2-4 Hours Shelf Life (at 60-80 o F): 6 months minimum in Dry Hard: 18-24 Hours unopened container. Note: Drying times are at 77 o F and 50% RH. Cool temperatures, high humidity, poor ventalition or heavy film thicknesses will extend dry times. Notes: Corrosion Resistance: 100 Hours on cold rolled steel. Formulated without lead, chrome, or mercury. Not designed for immersion. May be brush or roller applied to small areas. Surfaces to be painted must be clean, dry, and free from dirt, grease, oil, mill scale, rust and any other foreign matter by solvent wiping, hand or power tool cleaning. The information and data given herein are based upon tests and reports considered reliable and believed to be accurate. However, due to circumstances beyond our control including but not limited to surface preparation, application technique, substrate and curing conditions, no guarantee of duplicate performance, expressed or implied, is made. Revised 9/24/12 Harrison Paint Company 1329 Harrison Avenue SW, Canton, OH 44706-1596 330-455-5125 Fax 330-454-1750

Technical Data Sheet Product #: 939-88 (Formerly 401D0019) Product Name: Equipment Enamel Metal Primer - Gray Description: A fast air drying, corrosion resistant, solvent based paint designed to prime properly prepared metal surfaces. Properties: Physical: Application: Viscosity: 40-50" #4 Ford Cup Viscosity: As is Weight/Gallon: 10.0 +/- 0.50 Lbs. Reduction: None Gloss: Less than 15% @ 60 o Reducer: None Weight Solids: 63% +/- 2.0 Volume Solids: 40% +/- 2.0 Application Method: Airless/HVLP/Conventional spray VOC (theo.): Less than 3.8 Lbs./Gal. Coverage: 400-550 sq. ft. per gallon Wet Film Thickness: 3.0-4.0 mils Flash Point: 55 o F Dry Film Thickness: 1.2-1.6 mils Storage: 1 year unopened @ 77 o F Dry to Recoat: 2-4 Hours Dry Hard: 18-24 Hours Note: Drying times are at 77 o F and 50% RH. Cool temperatures, high humidity, poor ventilation, or heavy film thicknesses will extend dry times. Notes: Formulated without lead, chrome, or mercury. The information and data given herein are based upon tests and reports considered reliable and believed to be accurate. However, due to circumstances beyond our control including but not limited to surface preparation, application technique, substrate and curing conditions, no guarantee of duplicate performance, expressed or implied, is made. Harrison Paint Company 1329 Harrison Avenue SW, Canton, OH 44706-1596 330-455-5125 Fax 330-454-1750 Per Gal

TECHNICAL DATA SHEET Interior/Exterior DEFI-RUST OIL BASE METAL PRIMER 611-71 08/14/2001S Formerly 471 PRODUCT CHARACTERISTICS DESCRIPTION RECOMMENDED USES A rust-inhibitive metal primer for interior or exterior use. Direct to metal application. Excellent corrosion resistance. May be topcoated with latex or oil base finish. Recommended for most interior or exterior iron and steel surfaces. Ideal metal primer for Defi-Rust Enamels. Not intended to be used as a finish coat. Not for use on galvanized metal. Do not mix with water or other paint products. COLORS FINISH Flat 611-71 Red Oxide 611-72 Gray 611-73 White VEHICLE Alkyd FORMULATION Lead, chromate, and mercury free PHYSICAL DATA GLOSS RATING Less Than 10 % VISCOSITY 78-80 K.U. PERCENT SOLIDS By weight: 67.9 ± 2.0% By volume: 46.0 ± 2.0% NET WT. PER GAL. 10.7 ± 0.25 lbs./gal. VOC CATEGORY 3.8 lbs./gal. (450 grams/liter) FLASH POINT 103 F Closed Cup SURFACE PREPERATION & APPLICATION INSTRUCTIONS All surfaces must be clean and free of dust, dirt, grease, rust, mildew, soap residue, loose paint, glue size and any other foreign matter. For best results, the cause of any previous paint failure should be corrected before repainting. Do not paint on surfaces hot from direct sunlight. All repairs, patching, and sanding should be done before primer is applied. Surfaces in poor condition may require the removal of old paint before priming. Lightly sand glossy surfaces to ensure proper adhesion. This primer can be top-coated after 12 hours under good drying conditions and must be top-coated within 48 hours. RECOMMENDED PRIMERS RECOMMENDED APPLICATION None Brush: Roller: Spray: Airless: APPLICATION TEMPERATURE Minimum: 50 F. Maximum: 90 F. STORAGE TEMPERATURE Minimum: 35 F. Maximum: 120 F. TINTING Not to be tinted. DRYING TIME (Good Conditions) Tack free: To recoat: Hard: 4 hrs. 12 hrs. 48 hrs. PRACTICAL 400-450 sq. ft./gal. REDUCTION COVERAGE (Depending upon the porosity of the substrate) (For spray reduction see recommended application) RECOMMENDED FILM PER COAT STANDARD PACKAGING Wet: Dry: 3.0-4.0 mils 1.2-1.8 mils CLEAN-UP PACKAGING AND DISTRIBUTION 611-71, 611-72, 611-73 5 Gallon Gallon Quart FREIGHT CLASS Flammable Paint MSDS Available upon request. HPF-0054, Rev. 1, 8/21/98 Clean up with VM & P Naptha or Xylol A division of the Harrison Paint Co. P.O. Box 8470 Canton, OH 44711 Phone: (330) 455-5125 Customer Service: 1-800-321-0680 Fax: (330) 454-1750

TECHNICAL DATA SHEET Interior/Exterior DEFI-RUST GALVANIZED METAL PRIMER 611-88 08/14/2001D Formerly 348 PRODUCT CHARACTERISTICS DESCRIPTION RECOMMENDED USES A galvanized metal primer for interior or exterior use. Best protection is achieved when top-coated with Defi-Rust Enamels. Recommended for most interior or exterior galvanized metal substrates. Ideal galvanizing primer for Defi-Rust Enamels. Not intended to be used as a finish coat. Do not mix with water or other paint products. COLORS FINISH Satin 611-88 White VEHICLE Epoxy Ester/Linseed Oil FORMULATION Lead, chromate, and mercury free PHYSICAL DATA GLOSS RATING Oil VISCOSITY 75-78 K.U. PERCENT SOLIDS By weight: 67.8 ± 2.0% By volume: 46.6 ± 2.0% NET WT. PER GAL. 10.7 ± 0.25 lbs./gal. VOC CATEGORY 3.8 lbs./gal. (450 grams/liter) FLASH POINT 103 F Closed Cup SURFACE PREPERATION & APPLICATION INSTRUCTIONS All surfaces must be clean and free of dust, dirt, grease, rust, mildew, soap residue, loose paint, glue size and any other foreign matter. For best results, the cause of any previous paint failure should be corrected before repainting. Do not paint on surfaces hot from direct sunlight. All repairs, patching, and sanding should be done before primer is applied. Surfaces in poor condition may require the removal of old paint before priming. New galvanizing that has aged for less than 90 days should be wiped down with mineral spirits before priming. This primer can be top-coated after 72 hours under good drying conditions. RECOMMENDED PRIMERS RECOMMENDED APPLICATION None Brush: Roller: Spray: Airless: APPLICATION TEMPERATURE Minimum: 50 F. Maximum: 90 F. STORAGE TEMPERATURE Minimum: 35 F. Maximum: 120 F. TINTING Not to be tinted. DRYING TIME (Good Conditions) Tack free: To recoat: Hard: 24 hrs. 72 hrs. 5-7 days PRACTICAL 400-450 sq. ft./gal. REDUCTION COVERAGE (Depending upon the porosity of the substrate) (For spray reduction see recommended application) RECOMMENDED FILM PER COAT STANDARD PACKAGING Wet: Dry: 3.0-4.0 mils 1.2-1.8 mils CLEAN-UP PACKAGING AND DISTRIBUTION 611-88 Gallon Quart FREIGHT CLASS Flammable Paint MSDS Available upon request. HPF-0054, Rev. 1, 8/21/98 Clean up with VM & P Naptha or Xylol A division of the Harrison Paint Co. P.O. Box 8470 Canton, OH 44711 Phone: (330) 455-5125 Customer Service: 1-800-321-0680 Fax: (330) 454-1750

Technical Data Sheet Product #: Product Name: Description: 196-3739 (Part A - Epoxy) & 196-3740 (Part B - Curing Agent) 2K Polyamide Epoxy Primer - White A two component polyamide epoxy designed to prime a variety of interior and exterior metal surfaces. Forms a tough, abrasion and chemical resistant film that also resists rusting and corrosion. May be topcoated with most latex or solventborne finishes. Properties: Properties listed are for the mixed coating. Physical: Application: Viscosity: 85-95 KU Reduction: Do not thin Weight/Gallon: (lbs./gal.) 12.1 +/- 0.5 lbs. Pot Life (70 o F): 8 Hours Gloss: Less than 20% Induction Time: 30 Minutes Weight Solids: 68% +/- 2.0 Application Method: Brush, roll, airless spray Volume Solids: 49% +/- 2.0 Clean-Up: Xylene VOC (calculated): Less than 450 grams/liter Coverage (sq. ft./gallon): 350-450 Less than 3.8 lbs./gal. Wet Film Thickness: 3.5-4.5 mils Dry Film Thickness: 1.7-2.2 mils Flash Point: (Setaflash) 80 o F Dry to Touch: 30-60 Minutes Storage: One year minimum in Dry to Recoat/Topcoat: 4-8 Hours unopened container @ 77 o F Dry Hard: 24 Hours Mix Ratio: 1:1 by volume Note: Drying times are at 77 o F and 50% RH. Cool temperatures, high humidity, poor ventilation or heavy film thicknesses will extend dry times. Warmer temperatures will accelerate dry times. Notes: Surfaces to be primed must be clean, dry, and free from dirt, grease, oil, rust, mill scale, loose paint, and any other foreign matter. Thoroughly mix equal amounts by volume of Part A and Part B and allow to set for 30 minutes for induction. Do not exceed 8 hour pot life. Scuff sand glossy surfaces. Before applying over an existing finish, perform a spot test to check for lifting. Do not paint in direct sunlight or on surfaces hot from direct sunlight. Do not paint if rain is expected within 24 hours of application. Do not apply at temperatures below 50 o F or above 90 o F. Formulated without lead, chrome, or mercury. The information and data given herein are based upon tests and reports considered reliable and believed to be accurate. However, due to circumstances beyond our control including but not limited to surface preparation, application technique, substrate and curing conditions, no guarantee of duplicate performance, expressed or implied, is made. Preparation Date: 1/11/06 Harrison Paint Company 1329 Harrison Avenue SW, Canton, OH 44706-1596 330-455-5125 Fax 330-454-1750 Per Gal

TECHNICAL DATA SHEET Interior/Exterior DEFI-RUST ACRYLIC LATEX METAL PRIMER 622-71 08/15/2003 DESCRIPTION A rust-inhibitive acrylic latex metal primer for interior or exterior use. Direct to metal application. Excellent corrosion resistance. Low odor/low VOC and fast dry. Soap & water cleanup. PRODUCT CHARACTERISTICS RECOMMENDED USES Recommended for most interior or exterior metal surfaces. Ideal metal primer for Defi-Rust Acrylic Latex Enamel or any other acrylic latex paint. Not intended to be used as a finish coat. Do not mix with oil colors, other paints, or solvents. COLORS FINISH Flat 622-71 Red 622-72 Gray 622-73 Off-White VEHICLE Acrylic Latex Emulsion FORMULATION Lead, chromate, and mercury free PHYSICAL DATA GLOSS RATING Flat VISCOSITY 90-95 K.U. PERCENT SOLIDS By weight: 53.0 ± 2.0% By volume: 38.3 ± 2.0% NET WT. PER GAL. 10.9 ± 0.25 lbs./gal. VOC CATEGORY 3.2 lbs./gal. (380 grams/liter) FLASH POINT 150 F Closed Cup SURFACE PREPERATION & APPLICATION INSTRUCTIONS All surfaces must be clean and free of dust, dirt, grease, rust, mildew, soap residue, loose paint, glue size and any other foreign matter. For best results, the cause of any previous paint failure should be corrected before repainting. All repairs, patching, and sanding should be done before primer is applied. Surfaces in poor condition may require the removal of old paint before priming. Lightly sand glossy surfaces to ensure proper adhesion. This primer can be top-coated after 12 hours under good drying conditions. RECOMMENDED PRIMERS RECOMMENDED APPLICATION None Brush: Roller: Spray: Airless: Up to 10:1 reduction with clean water APPLICATION TEMPERATURE Minimum: 50 F. Maximum: 90 F. STORAGE TEMPERATURE Minimum: 35 F. Maximum: 120 F. TINTING Not to be tinted. DRYING TIME (Good Conditions) Tack free: To recoat: Hard: 4-6 hrs. 12 hrs. 48 hrs. PRACTICAL COVERAGE RECOMMENDED FILM PER COAT STANDARD PACKAGING 170-200 sq. ft./gal. (Depending upon the porosity of the substrate) Wet: Dry: 8.0-9.5 mils 3.0-3.5 mils REDUCTION CLEAN-UP PACKAGING AND DISTRIBUTION 622-71, 622-72, 622-73 5 Gallon Gallon Quart FREIGHT CLASS Non-Flammable Paint MSDS Available upon request. HPF-0054, Rev. 1, 8/21/98 Not normally recommended. If necessary use small amounts of clean water. (For spray reduction see recommended application) Clean up with soap and water A division of the Harrison Paint Co. P.O. Box 8470 Canton, OH 44711 Phone: (330) 455-5125 Customer Service: 1-800-321-0680 Fax: (330) 454-1750

OEM FINISHES Can your supplier do this? With a requirement as little as 50 gallons, we can totally customize your coating to your exact specifications. We have the ability to match color, sheen level, viscosity, dry time, resistance to UV rays and chemicals, VOC levels, even coverage levels and put your product into any container size required, from spray cans to tank loads. Our turn around times for new custom orders is generally 2 weeks. Standard stocked products are shipped to you next day if ordered by noon. We never charge a 1st order set up fee for orders over 50 gallons. PRIMERS Alkyd Shopcoat Low VOC Low Odor Alkyd Shopcoat Water Reducible Alkyd 2 Component Polyamide Epoxy Single Component Epoxy Fleet Frame Waterborne Water Based Organic Zinc Inorganic Zinc Zinc Rich TOPCOATS FOR METAL Quick Dry Alkyd Acrylic Enamel Fast Production Enamel Waterborne Quick Dry Water Based Water Reducible Alkyd 2 Part Polyamide Epoxy Single Component Epoxy Water Based Epoxy Aliphatic Urethane Moisture Cured Urethane Acrylic Epoxy Water & Solvent Baking Enamels Water & Solvent Dipping Enamels Roll Coat Primer and Topcoat WOOD FINISHES Water Based Dipping Stain Solvent Based Dip Clear Flow Coat Primer Acrylic Lacquer 1329 Harrison Avenue SW Canton, Ohio 44706 Pre-Cat Lacquer Conversion Varnish Catalyzed Lacquer Glazing 1-800-321-0680 Fax 1-330-454-1750 www.harrisonpaint.com www.excelsiorcoatings.com

QUICK DRY ACRYLIC MODIFIED ALKYD ENAMEL Chain stop quick dry for superior gloss and color retention Rust inhibitive properties make this an ideal DTM coating VOC compliant Acrylic modified Available in many factory batch colors Quick dry and cure, urethane hardener may be used with this product High gloss finish with clean distinction of image Colors Available 951-99 Tintable White 951-02 Gloss Black 951-43 New Cat Yellow 951-53 Light Gray 951-57 Ford Blue 951-61 John Deere Green 951-94 Deep Tint Base 951-95 Clear Tint Base 196-3553 Safety Yellow 196-4053 Safety Red 196-3680 Chrysler Safety Orange 196-3746 Taylor Red 196-3786 Eggshell Black 196-3554 Flat Black

951 LINE ACRYLIC MODIFIED ENAMEL We ve been manufacturing quality paints and finishes industry since our inception in 1911. Chainstop technology for outstanding exterior gloss and color retention Direct to metal or over primer High solids (52% volume solids) Can be used with or without a hardener Dries fast for quick turnaround VOC compliant for shop applications ORDER BY NOON, RECEIVE THE NEXT BUSINESS DAY PREPAID SHIPPING FOR AS LITTLE AS 24 GALLONS 12 READY MADE POPULAR EQUIPMENT, MACHINE AND SAFETY COLORS We can match colors from competitors, customers specs, RAL, Munsell, Fed Spec, Pantone, automotive industry, OSHA and never without a lab or set up fee. We make batches as small as 50 gallons to your exact specification. 1329 Harrison Ave. SW Canton, Ohio 44706 1-800-321-0680 Fax 1-330-454-1750

Technical Data Sheet Product #: Product Name: Description: 951 Line Quick Dry Enamel A high gloss, solventborne, acrylic modified alkyd enamel designed with exceptionally fast air-drying characteristics and very low VOC for a solvent thinned coating. Acrylic modification enhances the durability and performance on interior and exterior metal surfaces. Outstanding corrosion and weather resistance. Recoatable in two hours under normal conditions. Ideal for OEM, field, or re-paint applications on steel and aluminum. Properties Properties specified are based on 951-99 (Tinting White) and are typical of the series but may not apply exactly to each product within the series. Physical Application Viscosity: 70-75 KU Viscosity: As is Weight/Gallon: 10.4 +/- 0.25 Lbs. Reduction: None Gloss: 85% minimum Application Method: Airless spray/hvlp spray Weight Solids: 66% +/- 2.0 Clean-up: Xylene Volume Solids: 51% +/- 2.0 Coverage: (sq. ft./gal.) 550-650 (Excluding spray loss) VOC (theo.): Less than 3.5 Lbs./Gal. Wet Film Thickness: 2.5-3.0 mils Less than 420 grams/liter Dry Film Thickness: 1.2-1.5 mils Flash Point: (Setaflash) 45 o F Dry-To-Touch: 15-20 minutes Dry to Recoat 2-8 Hours / After 48 Hours Storage: 1 year unopened @ 77 o F Dry Hard: 18-24 Hours Note: Drying times are at 77 o F and 50% Relative Humidity. Cool temperatures, high humidity, heavy film thicknesses or poor ventilation will extend drying times. Available In: 951-99 Tinting White 951-02 Black 951-57 Ford Blue 951-94 Deep Tint Base 951-43 New Cat. Yellow 951-61 John Deere Green 951-95 Clear Tint Base 951-53 Light Gray Notes: Formulated without lead, chrome, or mercury. Bases may be tinted with Degussa Chroma-Chem 844 line colorants. May be brush or roller applied to small areas. All surfaces to be painted must be clean, dry, and free from dirt, grease, oil, rust, mill scale, welding dust, and any other foreign matter. The information and data given herein are based upon tests and reports considered reliable and believed to be accurate. However, due to circumstances beyond our control including but not limited to surface preparation, application technique, substrate and curing conditions, no guarantee of duplicate performance, expressed or implied, is made. Revised: 12-13-11 Harrison Paint Company 1329 Harrison Avenue SW, Canton, OH 44706-1596 330-455-5125 Fax 330-454-1750

951 ACRYLIC MODIFIED TINTABLE METALLIC ENAMEL We figured out a way to turn silver into gold Non leafing aluminum, will not rub off Chainstop technology for outstanding exterior gloss and color retention Direct to metal or over primer High solids (52% volume solids) Can be used with or without a hardener Dries fast for quick turnaround Perfect for trucks, decorative railings, rental furniture or anywhere a metallic finish is required Can be used on metal and most plastics as well as properly prepared and/or treated aluminum VOC compliant for most shop applications Available in quarts and gallons ORDER BY NOON, RECEIVE THE NEXT BUSINESS DAY PREPAID SHIPPING FOR AS LITTLE AS 24 GALLONS Standard metallic aluminum can be tinted into a rainbow of colors using solvent based industrial colorants We can match colors from competitors, customers specs, RAL, Munsell, Fed Spec, Pantone, automotive industry, OSHA and never without a lab or set up fee. We make batches as small as 50 gallons to your exact specification. 1329 Harrison Ave. SW Canton, Ohio 44706 1-800-321-0680 Fax 1-330-454-1750

Technical Data Sheet Product #: Product Name: Description: 951-64 Non Leafing Aluminum Quick Dry Enamel A solventborne, acrylic modified, non leafing aluminum alkyd enamel designed with exceptionally fast air-drying characteristics and very low VOC for a solvent thinned coating. Acrylic modification enhances the durability and performance on interior and exterior metal surfaces. Outstanding corrosion and weather resistance. Recoatable in two hours under normal conditions. Ideal for OEM, field, or re-paint applications on steel and aluminum. Properties Physical Application Viscosity: 70-75 KU Viscosity: As is Weight/Gallon: 8.7 +/- 0.25 Lbs. Reduction: None Gloss: 80% minimum Application Method: Airless spray/hvlp spray Weight Solids: 60% +/- 2.0 Clean-up: Xylene Volume Solids: 50% +/- 2.0 Coverage: (sq. ft./gal.) 550-650 (Excluding spray loss) VOC (theo.): Less than 3.5 Lbs./Gal. Wet Film Thickness: 2.4-3.0 mils Less than 420 grams/liter Dry Film Thickness: 1.2-1.5 mils Flash Point: (Setaflash) 45 o F Dry-To-Touch: 15-20 minutes Dry to Recoat 2-8 Hours / After 48 Hours Storage: 1 year unopened @ 77 o F Dry Hard: 18-24 Hours Note: Drying times are at 77 o F and 50% Relative Humidity. Cool temperatures, high humidity, heavy film thicknesses or poor ventilation will extend drying times. Notes: Formulated without lead, chrome, or mercury. May be tinted with Degussa Chroma-Chem 844 line colorants. May be brush or roller applied to small areas. All surfaces to be painted must be clean, dry, and free from dirt, grease, oil, rust, mill scale, welding dust, and any other foreign matter. The information and data given herein are based upon tests and reports considered reliable and believed to be accurate. However, due to circumstances beyond our control including but not limited to surface preparation, application technique, substrate and curing conditions, no guarantee of duplicate performance, expressed or implied, is made. Harrison Paint Company 1329 Harrison Avenue SW, Canton, OH 44706-1596 330-455-5125 Fax 330-454-1750

Technical Data Sheet Product #: Product Name: 955 Line Quick Dry Enamel Satin Description: A satin finish, solventborne, acrylic modified alkyd enamel designed with exceptionally fast air-drying characteristics and very low VOC for a solvent thinned coating. Acrylic modification enhances the durability and performance on interior and exterior metal surfaces. Outstanding corrosion and weather resistance. Recoatable in two hours under normal conditions. Ideal for OEM, field, or re-paint applications on steel and aluminum. Properties Properties specified are based on 955-99 (Tinting White) and are typical of the series but may not apply exactly to each product within the series. Physical: Application: Viscosity: 70-75 KU Viscosity: As is Weight/Gallon: 10.8 +/- 0.25 Lbs. Reduction: None Gloss: 30-40 Application Method: Airless spray/hvlp spray Weight Solids: 68% +/- 2.0 Clean-up: Xylene Volume Solids: 51% +/- 2.0 Coverage: (sq. ft./gal.) 550-650 (Excluding spray loss) VOC (theo.): Less than 3.5 Lbs./Gal. Wet Film Thickness: 2.5-3.0 mils Less than 420 grams/liter Dry Film Thickness: 1.2-1.5 mils Flash Point: (Setaflash) 45 o F Dry-To-Touch: 15-20 minutes Dry to Recoat 2-8 Hours / After 48 Hours Storage: 1 year unopened @ 77 o F Dry Hard: 18-24 Hours Note: Drying times are at 77 o F and 50% Relative Humidity. Cool temperatures, high humidity, heavy film thicknesses or poor ventilation will extend drying times. Notes: Formulated without lead, chrome, or mercury. Bases may be tinted with Degussa Chroma-Chem 844 line colorants. May be brush or roller applied to small areas. All surfaces to be painted must be clean, dry, and free from dirt, grease, oil, rust, mill scale, welding dust, and any other foreign matter. The information and data given herein are based upon tests and reports considered reliable and believed to be accurate. However, due to circumstances beyond our control including but not limited to surface preparation, application technique, substrate and curing conditions, no guarantee of duplicate performance, expressed or implied, is made. Revised: 9-17-12 Harrison Paint Company 1329 Harrison Avenue SW, Canton, OH 44706-1596 330-455-5125 Fax 330-454-1750

Versa-cryl NEW FOR 2011 Water based quick dry acrylic enamel Available in high gloss & satin finishes Quick dry For use on architectural & industrial applications ONLY sold through independent dealers! Ready mixed colors & tint bases Our new Versa-cryl dries in minutes, has fantastic adhesion to most substrates and is available in many colors and sheens. VOC s < 250 g/l. Sand milled batches as small as 50 gallons of custom product are available, and as always, NEVER with a set-up or lab fee! 1329 Harrison Avenue SW Canton, Ohio 44706 1-800-321-0680 Fax 1-330-454-1750 www.harrisonpaint.com www.excelsiorcoatings.com

Technical Data Sheet Product #: 196-4110 Product Name: Description: Waterborne Fast Dry Coating High Gloss Tinting White A water thinnable, low VOC coating designed for application on interior and exterior metal surfaces. Forms a tough, corrosion, UV, and weather resistance film for long term protection and outstanding gloss and color retention. May be applied direct-to-metal (DTM) or over a suitable metal primer. Dries quickly. Ideal for OEM, field, or re-paint applications. Properties: Physical: Application: Viscosity: (#3 Zahn Cup) 22-30 seconds Viscosity: As is Weight/Gallon: (lbs./gal.) 10.0 +/- 0.25 Reduction: None normally required Gloss: 75% minimum Reducer: Clean water only if needed Weight Solids: 48% +/- 2.0 Application Method: Spray Volume Solids: 36% +/- 2.0 Clean-Up: Soap & water VOC (calculated): <250 grams/liter Coverage (sq. ft./gallon): 400 (excluding spray loss) Flash Point: (Setaflash) 165 o F (<2.1 lbs./gal.) Wet Film Thickness: 3.5-4.25 mils Dry Film Thickness: Dry to Touch: 1.25-1.5 mils 20-30 minutes Storage: One year minimum in Dry to Recoat/Topcoat: 2 hours unopened container @ Dry Hard: 18-24 hours 77 o F Note: Drying times are for air dry at 77 o F and 50% RH. Force drying will decrease drying times dramatically. Cool temperatures, high humidity, poor ventilation or heavy film thicknesses will extend drying times. Notes: This product should be tinted with Chroma-Chem 896 line colorants. Do not force dry above 180 o F. All surfaces to be coated must be dry and clean of all foreign matter. Small or intricate areas may be brushed. Rolling is not recommended. Under good conditions, full cure is reached in 5-7 days when air dried only. The information and data given herein are based upon tests and reports considered reliable and believed to be accurate. However, due to circumstances beyond our control including but not limited to surface preparation, application technique, substrate and curing conditions, no guarantee of duplicate performance, expressed or implied, is made. Rev. 3/21/11 Harrison Paint Company 1329 Harrison Avenue SW, Canton, OH 44706-1596 330-455-5125 Fax 330-454-1750

Technical Data Sheet Product #: 196-4180 Product Name: Description: Versa-Cryl Waterborne Fast Dry Coating High Gloss Safety Yellow A water thinnable, low VOC coating designed for application on interior and exterior metal surfaces. Forms a tough, corrosion, UV, and weather resistance film for long term protection and outstanding gloss and color retention. May be applied direct-to-metal (DTM) or over a suitable metal primer. Dries quickly. Ideal for OEM, field, or re-paint applications. Properties: Physical: Application: Viscosity: (#3 Zahn Cup) 22-30 seconds Viscosity: As is Weight/Gallon: (lbs./gal.) 8.9 +/- 0.25 Reduction: None normally required Gloss: 75% minimum Reducer: Clean water only if needed Weight Solids: 42% +/- 2.0 Application Method: Spray Volume Solids: 36% +/- 2.0 Clean-Up: Soap & water VOC (calculated): <250 grams/liter Coverage (sq. ft./gallon): 400 (excluding spray loss) Flash Point: (Setaflash) 165 o F (<2.1 lbs./gal.) Wet Film Thickness: 3.5-4.25 mils Dry Film Thickness: Dry to Touch: 1.25-1.5 mils 20-30 minutes Storage: One year minimum in Dry to Recoat/Topcoat: 2 hours unopened container @ Dry Hard: 18-24 hours 77 o F Note: Drying times are for air dry at 77 o F and 50% RH. Force drying will decrease drying times dramatically. Cool temperatures, high humidity, poor ventilation or heavy film thicknesses will extend drying times. Notes: This product can be tinted with Chroma-Chem 896 line colorants. Do not force dry above 180 o F. All surfaces to be coated must be dry and clean of all foreign matter. Small or intricate areas may be brushed. Rolling is not recommended. Under good conditions, full cure is reached in 5-7 days when air dried only. The information and data given herein are based upon tests and reports considered reliable and believed to be accurate. However, due to circumstances beyond our control including but not limited to surface preparation, application technique, substrate and curing conditions, no guarantee of duplicate performance, expressed or implied, is made. Harrison Paint Company 1329 Harrison Avenue SW, Canton, OH 44706-1596 330-455-5125 Fax 330-454-1750

Water Reducible Alkyd Enamels We manufacture a full line of water reducible alkyds for numerous OEM applications Air Dry DTM Enamel Ready-To-Spray Air Dry DTM Enamel WR Baking Enamel ONLY sold through independent dealers! WR Baking Epoxy Enamel Air Dry & Baking Primers Our direct to metal water reducible alkyd 970 line is approved for use in containerization programs for the major US auto manufacturers. Sand milled batches as small as 50 gallons of custom product are available, and as always, NEVER with a set-up or lab fee! 1329 Harrison Avenue SW Canton, Ohio 44706 1-800-321-0680 Fax 1-330-454-1750 www.harrisonpaint.com www.excelsiorcoatings.com

WATER REDUCIBLE ALKYD ENAMEL Durability of an alkyd enamel, easy soap and water clean up Rust inhibitive properties make this an ideal DTM coating VOC compliant, eliminiation of solvents for equipment clean up Approved by big 3 auto manufacturers for use on material handling equipment Available in many factory batch colors Quick dry and cure for improved manufacturing speed and dunnage installation High gloss finish with clean distinction of image Color Available See following pages for samples and available colors

WATER REDUCIBLE ALKYD ENAMEL Colors Available 970-99 TINTABLE WHITE* 970-02 GLOSS BLACK* 970-74 BROWN OXIDE PRIMER* 970-72 GRAY PRIMER* 970-73 WHITE PRIMER/FLAT WHITE* 196-3687 FLAT BLACK/PRIMER* 970-41 SAFETY YELLOW* 970-34 GM NAO TEAL BLUE* 970-24 FORD TARGET YELLOW* 970-20 FORD CORP BLUE* 196-3505 CHRYSLER SAFETY PURPLE* 970-15 ANSI 61 GRAY S/G* 196-3485 CHRYSLER SAFETY YELLOW* 970-22 FORD M5J67A BEIGE 196-3516 FORD SEAL BROWN 196-3572 FORD EARTH BROWN 970-21 FORD M316 GREEN 196-3759 FORD ST LOUIS GREEN 970-23 FORD M340 MACHINE GRAY* 196-3487 FORD AXLE BROWN 196-3738 CHRYSLER BLUE #09 196-3517 CHRYSLER GREEN #17 196-3518 CHRYSLER STANDARD GRAY 196-3515 CHRYSLER BLUE #25 196-3504 CHRYSLER GOLD #07 196-3513 CHRYSLER SAFETY BLUE 196-3733 CHRYSLER MACHINE WHITE #12 970-06 CHRYSLER SAFETY ORANGE 196-3514 CHRYSLER STAMPING BLUE #19 196-3520 CHRYSLER SAFETY RED #28 196-3479 CHRYSLER SAFETY GREEN 970-40 SAFETY RED 196-3635 METALLIC BLUE 970-64 METALLIC ALUMINUM 196-3527 BRIGHT RED 196-3676 CASELLA GREEN 196-3714 SANITATION BROWN 196-3677 ATLANTIC GREEN 196-3679 CASELLA BLUE 970-94 DEEP TINT BASE* 970-95 CLEAR TINT BASE* 164-3660 W/R SOLVENT* * Denotes standard stocked item usually available for immediate shipment All other colors shown are catalog colors and are make and ship, generally within ten days with a minimum order of 50 gallons. Other colors available, but require additional lead time due to initial color match and quality control measures. Occasionally a color will change status depending on current market trends. Check with your sales person for current status.

TECHNICAL DATA SHEET Product #: Product Name: Description: 970 LINE WATER REDUCIBLE ALKYD ENAMEL A high gloss, air drying alkyd enamel thinned with water designed for coating properly prepared metal surfaces. Low VOC and corrosion resistance make this product ideal for painting structural steel or for OEM applications. PROPERTIES Physical Application Viscosity: 85-90 KU Viscosity: As Is Weight/Gallon: 8.7 * Reduction: None normally required Gloss: 85%+ Reducer: (by volume) <10% with water if needed Weight Solids: 32% * Application Method: Conventional & Airless Spray Volume Solids: 26% * VOC: (Excluding water) VOC: (Including water) Coverage: 415 sq.ft./gal. * 340 grams/liter Wet Film Thickness: 3.8 mils 145 grams/liter Dry Film Thickness: 1.0 mil Flash Point: 109 o F Set-To-Touch: 30 min. Dry to Recoat: 2 hours Storage: 6 months unopened @ 77 o F Dry Hard: 24 hours Note: Drying times are at 77 o F and 50% Relative Humidity. Cool temperatures, high humidity, heavy film thicknesses or poor ventilation will extend drying times. Notes: Formulated without lead, chrome, or mercury. May be brush or roller applied to small areas. Protect from freezing. * Varies by color The information and data given herein are based upon tests and reports considered reliable and believed to be accurate. However, due to circumstances beyond our control including but not limited to surface preparation, application technique, substrate and curing conditions, no guarantee of duplicate performance, expressed or implied, is made. Revised: 3/11/09 A division of the Harrison Paint Co. 1329 Harrison Ave SW, Canton, OH 44706 Phone: (330) 455-5125 Fax: (330) 454-1750 www.harrisonpaint.com

Technical Data Sheet Product #: Product Name: Description: 970 Line (High Flash) DTM Water Reducible Alkyd Enamels A high gloss, air drying alkyd enamel thinned with water designed for coating properly prepared metal surfaces. Low VOC and corrosion resistance make this product ideal for painting structural steel or for OEM applications. Properties Physical Application Viscosity: 85-90 KU Viscosity: As is Weight/Gallon: 9.9 * Reduction: None normally required Gloss: 85%+ Reducer: (by volume) <10% with water if needed Weight Solids: 43% * Application Method: Conventional & Airless Spray Volume Solids: 26% * Clean-up: Water VOC (theo.): 340 grams/liter Coverage: (sq. ft./gal.) 400-450 sq.ft/gal. * 145 grams/liter Wet Film Thickness: 4.0-5.0 mils Dry Film Thickness: 1.2-1.5 mils Flash Point: (Setaflash) 150 o F Dry-To-Touch: 30 minutes Storage: 6 months unopened @ 77 o F Dry to Recoat 2 hours Dry Hard: 24 hours Note: Drying times are at 77 o F and 50% Relative Humidity. Cool temperatures, high humidity, heavy film thicknesses or poor ventilation will extend drying times. Notes: Formulated without lead, chrome, or mercury. Bases may be tinted with Degussa Chroma-Chem 896 line colorants. May be brush or roller applied to small areas. All surfaces to be painted must be clean, dry, and free from dirt, grease, oil, rust, mill scale, welding dust, and any other foreign matter. The information and data given herein are based upon tests and reports considered reliable and believed to be accurate. However, due to circumstances beyond our control including but not limited to surface preparation, application technique, substrate and curing conditions, no guarantee of duplicate performance, expressed or implied, is made. Harrison Paint Company 1329 Harrison Avenue SW, Canton, OH 44706-1596 330-455-5125 Fax 330-454-1750

Technical Data Sheet Product #: Product Name: Description: 974 Line Satin Water Reducible Alkyd Enamel A satin finish, air drying alkyd enamel thinned with water designed for coating properly prepared metal surfaces. Low VOC and corrosion resistance make this product ideal for painting structural steel or for OEM applications. Properties Physical Application Viscosity: 85-90 KU Viscosity: As is Weight/Gallon: 10.4 +/- 0.25 Lbs.* Reduction: None normally required Gloss: 30-40 Reduser: (by volume) <10% with water if needed Weight Solids: 47% +/- 2.0* Application Method: Conventional & Airless Spray Volume Solids: 32% +/- 2.0* Coverage: (sq. ft./gal.) 400-450 (Excluding spray loss) VOC (Excluding water): Less than 340 grams/liter Wet Film Thickness: 3.1 mils VOC (Including water): Less than 130 grams/liter Dry Film Thickness: 1.0 mils Flash Point: (Setaflash) 109 o F Set-To-Touch: 30 min. Dry to Recoat: 2 hours Storage: 6 months unopened @ 77 o F Dry Hard: 24 hours * Varies by color Note: Drying times are at 77 o F and 50% Relative Humidity. Cool temperatures, high humidity, heavy film thicknesses or poor ventilation will extend drying times. Notes: Formulated without lead, chrome, or mercury. Bases may be tinted with Degussa Chroma-Chem 896 line colorants. May be brush or roller applied to small areas. All surfaces to be painted must be clean, dry, and free from dirt, grease, oil, rust, mill scale, welding dust, and any other foreign matter. The information and data given herein are based upon tests and reports considered reliable and believed to be accurate. However, due to circumstances beyond our control including but not limited to surface preparation, application technique, substrate and curing conditions, no guarantee of duplicate performance, expressed or implied, is made. Revised: 04-30-14 Harrison Paint Company 1329 Harrison Avenue SW, Canton, OH 44706-1596 330-455-5125 Fax 330-454-1750

COATINGS FOR FARM, CONSTRUCTION, MINING AND INDUSTRIAL EQUIPMENT We ve been manufacturing quality paints and finishes industry since our inception in 1911. Our coatings go through rigorous testing and QC before they are put into the field to assure you are getting the best product that perfectly fits your needs. We ll even do custom batches of as little as 50 gallons if you need a special paint for a special job..from a safety blue shop coat primer to a GM approved Direct to Metal topcoat, even exact gloss levels or viscosity We make round pegs for round holes, don t settle for fitting your production around your paint suppliers options tell us what you need and we ll design it for you, at no extra charge! Order stock product by noon, receive the next business day We match custom colors at no charge Prepaid shipping on as little as 24 gallons We also stock a full line of spray tips, guns & parts as well as safety equipment, masking products and solvents We fill as few as 1 custom spray can for touch ups Being a regional manufacturer allows us to react quickly to your special needs as well as providing personal and professional assistance with all your coating requirements. We supply any type coating you may need; water based, water reducible alkyd, solvent based, solvent & water based epoxy, solvent and water based urethanes. We can match colors from competitors, customers specs, RAL, Munsell, Fed Spec, Pantone, automotive industry, OSHA 1329 Harrison Avenue SW Canton, Ohio 44706 1-800-321-0680 Fax 1-330-454-1750 www.harrisonpaint.com www.excelsiorcoatings.com

DEFI-RUST EQUIPMENT ENAMEL Air dry enamel, dries to touch in 1 hour, perfect for machinery Rust inhibitive properties make this an ideal DTM coating VOC compliant May be used with urethane hardener for improved exterior performance Available in many factory batch colors May be touched up with brush or trim roller with good leveling High gloss finish with clean distinction of image Colors Available 931-01 Fleet White* 931-02 Fleet Black* 931-03 Safety Red* 931-06 Omaha Orange* 931-08 Safety Yellow* 931-10 New Cat Yellow* 931-13 Refuse Blue* 931-14 Walnut Brown* 931-16 Dark Gray* 931-68 Maroon 931-59 Komatsu Yellow 931-37 Dumpster Green 931-42 Safety Orange 931-35 Terex/Clark Green 931-92 Light Gray 931-47 Komatsu Orange 931-55 Medium Yellow 931-90 Komatsu Yellow * standard stock colors usually available for immediate shipment

Technical Data Sheet Product #: Product Name: Description: 931 Line Equipment Enamel A series of fast, air drying, solventborne alkyd coatings designed for painting properly prepared metal surfaces. Provides a high gloss, corrosion resistant finish. Recommended for tractors, trailers, machinery, tools, snow plows and industrial maintenance applications. Physical Application Viscosity: 78-80 KU Viscosity: Apply without thinning Weight/Gallon: 9.4 +/- 0.25 Lbs. Reduction: None Gloss: 85% minimum Reducer: None Weight Solids: 65% +/- 2.0 Application Method: Airless spray/hvlp spray/conventional Spray Volume Solids: 52% +/- 2.0 Clean-up: Xylene/VM&P Naphtha Flash Point: (Setaflash) 55 o F Coverage: (sq. ft./gal.) 400-550 (Excluding spray loss) VOC (theo.): Less than 340 grams/liter Wet Film Thickness: 2.9-3.8 mils Less than 2.8 Lbs./Gal. Dry Film Thickness: 1.5-2.0 mils Dry to Recoat 18-24 Hours Storage: Store at 60-80oF in a dry place out of direct sunlight Dry Hard: 24-48 Hours Shelf Life: Physical properties shown are based on 931-01 (White). Physical properties of other products within the line may vary. One year minimum in unopened container at 77oF Properties Note: Drying times are at 77 o F and 50% Relative Humidity. Cool temperatures, high humidity, heavy film thicknesses or poor ventilation will extend drying times. Notes: Read label directions for detailed instructions and warnings. Formulated without lead, chrome, or mercury. Do not use on bare galvanized metal. Do not exceed recommended film thickness, apply to hot surfaces or apply in direct sunlight as this can cause wrinkling, blistering, peeling or other failure. The information and data given herein are based upon tests and reports considered reliable and believed to be accurate. However, due to circumstances beyond our control including but not limited to surface preparation, application technique, substrate and curing conditions, no guarantee of duplicate performance, expressed or implied, is made. Revised: 06-25-13 Harrison Paint Company 1329 Harrison Avenue SW, Canton, OH 44706-1596 330-455-5125 Fax 330-454-1750

DEFI-RUST ALKYD ENAMEL Air dry enamel, dries to touch in 4 hours Rust inhibitive properties make this an ideal DTM coating VOC compliant May be used with urethane hardener for improved exterior performance Available in many factory batch colors Also available in matching aerosols for touch ups and hard to reach areas High gloss finish with clean distinction of image Colors Available 611-01 Gloss White 611-02 Gloss Black 611-40 Satin White 611-41 Safety Yellow 611-42 Safety Red 611-46 Machinery Gray 611-47 Satin Black 611-49 Hunter Green 611-50 Fern Green 611-53 Light Gray 611-56 Flat Black 611-57 Safety Blue 611-58 Navy Blue 611-59 Burgundy 611-61 Spring Green 611-62 Bronzetone 611-64 Aluminum 611-78 Safety Orange 611-92 Light Tint Base 611-93 Midtone Base 611-94 Deep Base 611-95 Clear Base

TECHNICAL DATA SHEET Interior/Exterior DEFI-RUST OIL BASE ENAMEL 611-01 08/14/2001K Formerly 440 PRODUCT CHARACTERISTICS DESCRIPTION RECOMMENDED USES A gloss enamel formulated to protect and beautify interior and exterior wood Recommended for machinery, tanks, implements, furniture, tractors, boats, and metal surfaces. Direct to metal application. Excellent corrosion resistance. trucks, trailers, and buses. Ideal for use on all similar surfaces where a heavy-duty coating is required. Do not mix with water or other paint products. Outstanding toughness and durability on wood. COLORS FINISH High Gloss 611-01 White 611-02 Black 611-92 LTB 611-93 MTB 611-94 DTB 611-95 CLB 611-42 Fire Red 611-43 New Cat Yellow 611-45 Shamrock Green 611-46 Machine Gray 611-48 Safety Yellow 611-49 Dark Roof Green 611-50 Fern Green 611-52 Charleston Green 611-53 Light Gray 611-54 Vista Green 611-55 Safety Orange 611-57 Safety Blue 611-60 Walnut VEHICLE FORMULATION Alkyd Lead, chromate, and mercury free PHYSICAL DATA GLOSS RATING 85 % VISCOSITY 75-78 K.U. PERCENT SOLIDS By weight: 62.2 ± 2.0% By volume: 45.6 ± 2.0% NET WT. PER GAL. 9.3 ± 0.25 lbs./gal. VOC CATEGORY 3.8 lbs./gal. (450 grams/liter) FLASH POINT 103 F Closed Cup SURFACE PREPERATION & APPLICATION INSTRUCTIONS All surfaces must be clean and free of dust, dirt, grease, rust, mildew, soap residue, loose paint, glue size and any other foreign matter. For best results, the cause of any previous paint failure should be corrected before repainting. Do not paint late in the day or on dewey mornings especially in high humidity areas as flashing could occur. Do not paint on surfaces hot from direct sunlight. Previously painted surfaces should be cleaned, patched, and spot-primed as needed. Surfaces in poor condition may require the removal of old paint and a prime coat. Bare metal should be coated with a proper Defi-Rust metal primer to achieve optimum rust-inhibitive properties. Galvanized metal must be coated with Defi-Rust Galvanized Metal Primer prior to application of this product.two coats of this product are recommended on most surfaces. RECOMMENDED PRIMERS RECOMMENDED APPLICATION Interior Wood Exterior Wood Metal Galvanizing Direct Application Direct Application 611-71, 611-72, 611-73 Defi-Rust Metal Primers 611-88 Defi-Rust Galvanized Metal Primer Brush: Roller: Spray: Airless: APPLICATION TEMPERATURE Minimum: 50 F. Maximum: 90 F. STORAGE TEMPERATURE Minimum: 35 F. Maximum: 120 F. TINTING Hundreds of additional colors may be obtained by using the tint bases and approved colorants DRYING TIME (Good Conditions) Tack free: To recoat: Hard: 4-6 hrs. 16-18 hrs. 48 hrs. PRACTICAL 400-450 sq. ft./gal. REDUCTION COVERAGE (Depending upon the porosity of the substrate) (For spray reduction see recommended application) RECOMMENDED FILM PER COAT Wet: Dry: 3.0-4.0 mils 1.2-1.8 mils CLEAN-UP PACKAGING AND DISTRIBUTION STANDARD PACKAGING 611-01, 611-02, 611-46, 611-49, 611-53 All Tint Bases All other standard colors 5 Gallon 5 Gallon Gallon Gallon Gallon Quart Quart Quart FREIGHT CLASS Flammable Paint MSDS Available upon request. HPF-0054, Rev. 1, 8/21/98 A division of the Harrison Paint Co. P.O. Box 8470 Canton, OH 44711 Phone: (330) 455-5125 Customer Service: 1-800-321-0680 Fax: (330) 454-1750 Clean up with VM & P Naptha or Xylol

OTC/AIM/LADCO COMPLIANT SOLVENT BASED COATINGS DON T BE MISLED! While the government has limited the amount of VOC s per gallon of paint, it isn t illegal to sell solvent based coatings as long as the VOC limits aren t exceeded for particular applications WHERE THE PRODUCT IS BEING APPLIED. The limits vary by state, but as a general rule the following applies: Architectural high gloss- 250 g/l Architectural low sheen 150 g/l Architectural metal 400 g/l Architectural primer 200 g/l Stain block primer 350 g/l Industrial Primer 340 g/l Industrial Topcoat 340 g/l Industrial DTM 340 g/l OEM primer point source OEM topcoat point source OEM DTM point source Metallic Gloss 500 g/l Swimming pool paint 340 g/l Defi-Rust Alkyd DTM Gloss 15 colors, 4 bases Satin 3 colors, 4 bases Primer 4 colors 135 Series Exterior House Paint Gloss 1 color, 1 base Country Estate Linseed Barn Paint Gloss 3 colors Versa-Seal Interior/Exterior Alkyd Stain Blocking Primer Dura-Guard 739LV Poly Floor & trim Gloss 8 colors, 3 bases Polyamide 2 Part (50/50) Gloss Epoxy 2 colors, 2 bases Clear Polyurethane Concrete Finish 1 blend, 1 MCU Heavy Duty 1K Epoxy Non-Skid Floor Coating 7 colors Oil Modified Urethane Gym/Wood Finish Gloss, Semi-Gloss, Satin Check with your municipality to verify your limits don t vary from your states requirements. Metallic Aluminum Paint Low Odor Hi-Solids Shopcoat Primer 1 Brushing, 1 Hi-Heat 4 colors 931 Series Gloss Equipment Enamel 10 colors Rubber Based Swimming Pool Paint Polyamide Epoxy Swimming Pool Paint DTM Water Reducible Alkyd Enamel 4 colors 4 colors 12 colors, 4 primers, 3 bases 1329 Harrison Avenue SW Canton, Ohio 44706 1-800-321-0680 Fax 1-330-454-1750 www.harrisonpaint.com www.excelsiorcoatings.com Moisture Cured Urethane Clear or with pigment pack Gloss

Technical Data Sheet Product #: Product Name: Description: 611 LV Line OTC Compliant Defi Rust Enamel A tough, durable VOC compliant enamel finish that seals, beautifies and protects interior and exterior metal and wood surfaces. A rust-inhibiting formula that creates an armor coating against the corrosion of metal and a shield against degradation of wood due to weathering Properties: Properties specified are based on 611-01-LV (White) and are typical of the series but may not apply exactly to each individual product within the series. Physical: Application: Viscosity: 75-78 KU Viscosity: As is Weight/Gallon: 10.32* Reduction: Apply without thinning Gloss: 85% minimum Reducer: None Weight Solids: 57% +/- 2.0 Application Method: Brush, Roller, Airless Spray Volume Solids: 47% +/- 2.0 Clean-Up: Mineral Spirits VOC (calculated): Less Than 340 grams/liter Coverage (sq. ft./gallon): 625-750 Less Than 2.8 lbs./gallon Wet Film Thickness: 2.1-2.6 Dry Film Thickness: 1.0-1.2 mils Flash Point: (Setaflash) 103 o F Dry to Touch: 3-4 hours Storage: One year minimum in Dry to Recoat/Topcoat: 16-18 hours unopened container @ 77 o F Dry Hard: 24-48 hours Note: Drying times are at 77 o F and 50% RH. Cool temperatures, high humidity, poor ventilation or heavy film thicknesses will extend dry times. Notes: All surfaces to be finished must be clean and free from dirt, dust, water, wax, polish, loose coatings and any other foreign matter. May be applied direct-to-metal (DTM) offering outstanding adhesion on properly prepared surfaces. The information and data given herein are based upon tests and reports considered reliable and believed to be accurate. However, due to circumstances beyond our control including but not limited to surface preparation, application technique, substrate and curing conditions, no guarantee of duplicate performance, expressed or implied, is made. 3/25/2009 Harrison Paint Company, 1329 Harrison Ave SW, Canton, OH 44706 Ph: (330) 455-5125 Fax: (330) 454-1750

DEFI-RUST ACRYLIC LATEX ENAMEL Air dry enamel, dries to touch in 1 hour Rust inhibitive properties make this an ideal DTM coating VOC compliant Superior hardness and durability with soap and water clean up Available in many factory batch colors Also available in matching aerosols for touch ups and hard to reach areas High gloss finish with clean distinction of image Colors Available 622-01 Gloss White 622-02 Gloss Black 622-40 Satin White 622-41 Safety Yellow 622-42 Safety Red 622-46 Machinery Gray 622-47 Satin Black 622-49 Hunter Green 622-50 Fern Green 622-53 Light Gray 622-56 Flat Black 622-57 Safety Blue 622-58 Navy Blue 622-59 Burgundy 622-61 Spring Green 622-62 Bronzetone 622-64 Aluminum 622-78 Safety Orange 622-92 Light Tint Base 622-93 Midtone Base 622-94 Deep Base 622-95 Clear Base 622-71 Red Primer 622-72 Gray Primer 622-73 Off White Primer

TECHNICAL DATA SHEET Interior/Exterior DEFI-RUST ACRYLIC LATEX ENAMEL 622-01 08/13/2001L Formerly W440 PRODUCT CHARACTERISTICS DESCRIPTION RECOMMENDED USES An acrylic latex enamel formulated to protect and beautify interior and exterior wood, metal, or masonry surfaces. Low odor/low VOC. Excellent direct to metal application and corrosion resistance. Outstanding toughness and durability on wood. Recommended for Machinery, tanks, implements, furniture, tractors, boats, trucks, trailers, and buses. Ideal for use on all similar surfaces where a heavy-duty coating is required. Do not mix with oil colors, other paints, or solvents. Soap & water cleanup. COLORS FINISH Gloss 622-01 White 622-02 Black 622-92 LTB 622-42 Fire Red 622-45 Shamrock Green 622-48 Safety Yellow 622-57 Safety Blue 622-60 Walnut 622-62 Bronzetone (Satin) VEHICLE Acrylic Latex Emulsion 622-93 MTB 622-52 Charleston Green 622-94 DTB 622-53 Light Grey FORMULATION Lead, chromate, and mercury free 622-95 CLB 622-55 Safety Orange PHYSICAL DATA GLOSS RATING 75 %+ VISCOSITY 90-95 K.U. PERCENT SOLIDS By weight: 46.2 ± 2.0% By volume: 35.3 ± 2.0% NET WT. PER GAL. 10.0 ± 0.25 lbs./gal. VOC CATEGORY 3.2 lbs./gal. (380 grams/liter) FLASH POINT 150 F Closed Cup SURFACE PREPERATION & APPLICATION INSTRUCTIONS All surfaces must be clean and free of dust, dirt, grease, rust, mildew, soap residue, loose paint, glue size and any other foreign matter. For best results, the cause of any previous paint failure should be corrected before repainting. New stucco or masonry surfaces should age 30 days before being painted. Previously painted surfaces should be cleaned, patched, and spot-primed as needed. Surfaces in poor condition may require the removal of old paint and a prime coat. Unpainted surfaces should receive one coat of the recommended primer before painting; bare metal should be coated with a proper Defi-Rust Metal primer to optimize rust-inhibitive properties. Two coats of this product are recommended on most surfaces. For maximum corrosion resistance, triple film thickness per coat listed below. RECOMMENDED PRIMERS RECOMMENDED APPLICATION Interior Wood Exterior Wood Metal Galvanizing Masonry 240-66 Acrylic Enamel Undercoater 251-77 Exterior Alkyd Wood Primer 622-72 Defi-Rust Latex Metal Primer 622-72 Defi-Rust Latex Metal Primer 245-88 Classic Versa-Seal Brush: Roller: Spray: Airless: Up to 10:1 reduction with clean water APPLICATION TEMPERATURE Minimum: 50 F. Maximum: 90 F. STORAGE TEMPERATURE Minimum: 35 F. Maximum: 120 F. TINTING Hundreds of additional colors may be obtained by using the tint bases and approved colorants DRYING TIME (Good Conditions) Tack free: To recoat: Hard: 4 hrs. 12 hrs. 24 hrs. PRACTICAL COVERAGE RECOMMENDED FILM PER COAT STANDARD PACKAGING 300-400 sq. ft./gal. (Depending upon the porosity of the substrate) Wet: Dry: 3.0-4.0 mils 1.0-1.5 mils 622-01, 622-92 All other tint bases and standard colors REDUCTION CLEAN-UP PACKAGING AND DISTRIBUTION 5 Gallon Gallon Gallon Not normally recommended. If necessary use small amounts of clean water. (For spray reduction see recommended application) Clean up with soap and water Quart Quart FREIGHT CLASS Non-Flammable Paint MSDS Available upon request. HPF-0054, Rev. 1, 8/21/98 A division of the Harrison Paint Co. P.O. Box 8470 Canton, OH 44711 Phone: (330) 455-5125 Customer Service: 1-800-321-0680 Fax: (330) 454-1750

POLYAMIDE EPOXY 1 hour dry Excellent water resistance VOC compliant Superior hardness 1:1 mix ratio for ease of use Extreme chemical resistance High gloss finish Colors Available 909-92 Tintable White 909-95 Tintable Clear

TECHNICAL DATA SHEET Interior/Exterior POLYAMIDE EPOXY COATING (WHITE) 909-92 03/03/2003 [ ] [ ] DESCRIPTION A premium two-part catalyzed polyamide epoxy with exceptionaly high gloss, hardness, and overall performance. Tile-like appearance. Highly resistant to scrubbing, scuffing, and various industrial chemicals such as strong acids & bases when applied as per instructions. COLORS 909-92 LTB Base (Component A) 909-00 Catalyst (Component B) PRODUCT CHARACTERISTICS RECOMMENDED USES Recommended for use on properly prepared plaster, drywall, hardboard, concrete, cement block, brick, wood, metal, and fiberglass. Ideal for storage tanks, pumps, steel pipes, bridges, drain-wells, concrete floors and automotive undercoating. Do not mix with water or other paint products. FINISH VEHICLE FORMULATION PHYSICAL DATA GLOSS RATING 90 % VISCOSITY A 103 K.U. PERCENT SOLIDS A By weight: 75.3 ±1.0% By volume: 55.0 ±1.0% B By weight: 54.3 ±1.0% By volume: 46.2 ±1.0% VOC (CATEGORY) A 3.8 lbs./gal. (450 grams/liter) B 3.8 lbs./gal. (450 grams/liter) NET WT. PER GAL. FLASH POINT High Gloss Polyamide Epoxy Resin Lead, chromate, and mercury free B 57 K.U. A 12.0 ± 0.25 lbs./gal. B 9.0 ± 0.25 lbs./gal. A 93 F Closed Cup B 84 F Closed Cup SURFACE PREPERATION & APPLICATION INSTRUCTIONS All surfaces must be clean and free of dust, dirt, grease, mildew, soap residue, loose paint, glue size and any other foreign matter. For best results, the cause of any previous paint failure should be corrected before repainting. Thoroughly mix together component A + B at a 1:1 ratio about 30 min. prior to application. Mechanical agitation is preferred. Pot life after mixing is 8 hrs. Mix only what is needed for use. Do not use over other coatings unless first tested for lifting. Concrete floors must be acid etched. Brush application is recommended using a nylon bristle brush for small areas only. Do not attempt to brush out large areas. Roller application is recommended only on smooth surfaces such as drywall and plaster using a short-napped mohair or pronel cover. Keep roller well filled as less than a full roller can result in air entrapment, causing a bubble formation in film. For optimum results and appearance of finish coat, conventional or airless spray application is recommended. Material can be applied by conventional spray only at temperatures above 50 F. Sprayer should be Binks Model #18 or equivalent with fluid nozzle #66, needle #65, orifice.070, air cap #66 PA, fluid hose size 3/8 inch and air hose size 1/2 inch. Can also be applied by airless spray using Graco President model or equivalent with pump ratio 28:1 or better, orafice size.015 to.021, fluid pressure 1200 to 2400, high pressure fluid hose 3/8 inch, and air hose 1/2 inch. RECOMMENDED PRIMERS RECOMMENDED APPLICATION Metal 919-71, -72, -73 Universal Primer Porous Block 560-88 Block Filler All Other Surfaces 245-88 Classic Versa-Seal Brush: Roller: Spray: Airless: APPLICATION TEMPERATURE Minimum: 50 F. Maximum: 90 F. STORAGE TEMPERATURE Minimum: 35 F. Maximum: 120 F. TINTING Approved colorants may be added to LTB before mixing with catalyst not to exceed 8 oz. per gallon. Use double the tinting formula. CURING TIME (Good Conditions) Tack free: To recoat: Hard: 4 hrs. 8 hrs. 24 hrs. PRACTICAL 500-550 sq. ft./gal. REDUCTION As Supplied COVERAGE (Depending upon the porosity of the substrate) (For spray reduction, see recommended application) RECOMMENDED FILM PER COAT Wet: Dry: 2.9-3.2 mils 1.5-1.6 mils CLEAN-UP PACKAGING AND DISTRIBUTION STANDARD PACKAGING 909-00, 909-92 (Packaged as kits only) Gallon Quart FREIGHT CLASS Flammable Paint MSDS Available upon request. HPF-0054, Rev. 1, 8/21/98 A division of the Harrison Brands Corp. P.O. Box 8470 Canton, OH 44711 Phone: (330) 455-5125 Customer Service: 1-800-321-0680 Fax: (330) 454-1750 Clean up with 911-00 Epoxy Thinner

TECHNICAL DATA SHEET Interior/Exterior POLYAMIDE EPOXY COATING (CLEAR BASE) 909-95 03/03/2003 [ ] [ ] DESCRIPTION A premium two-part catalyzed polyamide epoxy with exceptionaly high gloss, hardness, and overall performance. Tile-like appearance. Highly resistant to scrubbing, scuffing, and various industrial chemicals such as strong acids & bases when applied as per instructions. COLORS 909-95 Clear Base (Component A) 909-00 Catalyst (Component B) PRODUCT CHARACTERISTICS RECOMMENDED USES Recommended for use on properly prepared plaster, drywall, hardboard, concrete, cement block, brick, wood, metal, and fiberglass. Ideal for storage tanks, pumps, steel pipes, bridges, drain-wells, concrete floors and automotive undercoating. Do not mix with water or other paint products. FINISH VEHICLE FORMULATION PHYSICAL DATA GLOSS RATING 90 % VISCOSITY A 103 K.U. PERCENT SOLIDS A By weight: 75.3 ±1.0% By volume: 55.0 ±1.0% B By weight: 54.3 ±1.0% By volume: 46.2 ±1.0% VOC (CATEGORY) A 3.8 lbs./gal. (450 grams/liter) B 3.8 lbs./gal. (450 grams/liter) NET WT. PER GAL. FLASH POINT High Gloss Polyamide Epoxy Resin Lead, chromate, and mercury free B 57 K.U. A 12.0 ± 0.25 lbs./gal. B 9.0 ± 0.25 lbs./gal. A 93 F Closed Cup B 84 F Closed Cup SURFACE PREPERATION & APPLICATION INSTRUCTIONS All surfaces must be clean and free of dust, dirt, grease, mildew, soap residue, loose paint, glue size and any other foreign matter. For best results, the cause of any previous paint failure should be corrected before repainting. Thoroughly mix together component A + B at a 1:1 ratio about 30 min. prior to application. Mechanical agitation is preferred. Pot life after mixing is 8 hrs. Mix only what is needed for use. Do not use over other coatings unless first tested for lifting. Concrete floors must be acid etched. Brush application is recommended using a nylon bristle brush for small areas only. Do not attempt to brush out large areas. Roller application is recommended only on smooth surfaces such as drywall and plaster using a short-napped mohair or pronel cover. Keep roller well filled as less than a full roller can result in air entrapment, causing a bubble formation in film. For optimum results and appearance of finish coat, conventional or airless spray application is recommended. Material can be applied by conventional spray only at temperatures above 50 F. Sprayer should be Binks Model #18 or equivalent with fluid nozzle #66, needle #65, orifice.070, air cap #66 PA, fluid hose size 3/8 inch and air hose size 1/2 inch. Can also be applied by airless spray using Graco President model or equivalent with pump ratio 28:1 or better, orafice size.015 to.021, fluid pressure 1200 to 2400, high pressure fluid hose 3/8 inch, and air hose 1/2 inch. RECOMMENDED PRIMERS RECOMMENDED APPLICATION Metal 919-71, -72, -73 Universal Primer Porous Block 560-88 Block Filler All Other Surfaces 245-88 Classic Versa-Seal Brush: Roller: Spray: Airless: APPLICATION TEMPERATURE Minimum: 50 F. Maximum: 90 F. STORAGE TEMPERATURE Minimum: 35 F. Maximum: 120 F. TINTING Approved colorants may be added to white base before mixing with catalyst not to exceed 24 oz. per gallon. Use double the tinting formula. CURING TIME (Good Conditions) Tack free: To recoat: Hard: 4 hrs. 8 hrs. 24 hrs. PRACTICAL COVERAGE 500-550 sq. ft./gal. (Depending upon the porosity of the substrate) REDUCTION As Supplied RECOMMENDED FILM PER COAT Wet: Dry: 2.9-3.2 mils 1.5-1.6 mils CLEAN-UP PACKAGING AND DISTRIBUTION STANDARD PACKAGING 909-00, 909-95 (Packaged as kits only) Gallon Quart FREIGHT CLASS Flammable Paint MSDS Available upon request. HPF-0054, Rev. 1, 8/21/98 A division of the Harrison Brands Corp. P.O. Box 8470 Canton, OH 44711 Phone: (330) 455-5125 Customer Service: 1-800-321-0680 Fax: (330) 454-1750 Clean up with 911-00 Epoxy Thinner

TECHNICAL DATA SHEET Interior/Exterior 2K HIGH SOLIDS EPOXY MASTIC 9909-XX 7/25/13 DESCRIPTION Two-component, high-build, solventborne coating. Provides a high gloss finish that resists abrasion, scuffing, marring, corrosion, and many chemicals. Penetrates & adheres to rust that is tightly bound to the substrate. Low permeability film. Low VOC formulation (compliant for most areas). PRODUCT CHARACTERISTICS RECOMMENDED USES Use as a high-build primer or finish coat over concrete & metal surfaces, including sound, rusty metal. May be applied to surfaces prepared by hand or power tool cleaning where blasting is impractical or prohibited. May be used as a high-build primer under a variety of topcoats. PRODUCTS/COLORS FINISH High Gloss Base (Part A): 9909-01 White 9909-41 Safety Yellow 9909-11 Silver Gray 9909-42 Safety Red VEHICLE Amine Catalyzed Epoxy 9909-57 Safety Blue FORMULATION Formulated without lead, chrome and mercury Hardener (Part B): 9909-00 Clear PHYSICAL DATA (Mixed Components) GLOSS RATING 85% ± 5.0 MIX RATIO 4 parts Base (Part A) to 1 part Hardener (Part B) VOLUME SOLIDS 82% ± 3.0 INDUCTION None POT LIFE 3 hrs @ 75 o F VOC CATEGORY Less than 250 grams/liter after thinning FLASH POINT 80 o F SURFACE PREPARATION & APPLICATION INSTRUCTIONS Read label directions for detailed surface preparation & mixing instructions. Correct for the cause of any previous paint failures before applying this product. Although this coating may be applied over sound rust, it should not be applied over loose or powdery rust that is not tightly adhering to the substrate. This product must be topcoated when used in direct sunlight. This coating must be blended before it can be used. Any mixture of components will have the hazards of all of the components. Before opening the packages, read all warning labels. Follow all precautions. RECOMMENDED PRIMERS RECOMMENDED APPLICATION Bare Metal None Brush/Roller: Thin up to 10% by volume with xylene Bare Concrete 197-8001 2K Waterborne Epoxy Sealer Airless Spray: Thin up to 10% by volume with xylene APPLICATION TEMP. Minimum: 45 o F Maximum: 90 o F STORAGE TEMP. Minimum: 50 o F Maximum: 90 o F TINTING Not to be tinted DRYING TIME To Recoat:: 7-8 hours (Good Conditions) Light Duty: 1-2 days Normal Use: 5-7 days PRACTICAL 190-250 sq. ft./gal. REDUCTION Up to 10% by volume with xylene COVERAGE (Depends on substrate texture and porosity) RECOMMENDED Wet: 6.0-8.5 mils CLEANUP Xylene FILM PER COAT Dry: 5.0-7.0 mils PACKAGING AND DISTRIBUTION STANDARD 9909-01 9909-11 9909-41 9909-42 9909-57 5 Gallon 1 Gallon PACKAGING 9909-00 1 Gallon 1 Quart FREIGHT CLASS Flammable Paint MSDS Available upon request A division of the Harrison Paint Co. 1329 Harrison Ave SW, Canton, OH 44706 Phone: (330) 455-5125 Customer Service: 1-800-321-0680 Fax: (330) 454-1750

TECHNICAL DATA SHEET Interior/Exterior HEAVY-DUTY 2K EPOXY NON-SKID COATING 196-4392 9/3/13 DESCRIPTION Two-component, high-build, solventborne coating. Provides a slip resistant surface for dry and wet conditions. Resists abrasion, impact, water, salt, and mild chemicals. More durable than most one-component anti-slip coatings. Low VOC formulation (compliant for most areas). PRODUCT CHARACTERISTICS RECOMMENDED USES Use to provide a slip resistant surface over interior and exterior concrete and metal substrates. Ideal for warehouse and factory floors, aisle-ways, parking decks, loading docks, ramps, steps and other areas where a heavy-duty, non-skid coating is desired. PRODUCTS/COLORS FINISH Gloss Base (Part A): 196-4392 Gray 196-4393 Safety Yellow VEHICLE Amine Catalyzed Epoxy Hardener (Part B): 196-4392 Clear 196-4393 Clear FORMULATION Formulated without lead, chrome and mercury PHYSICAL DATA (Mixed Components) GLOSS RATING N/A MIX RATIO 4 parts Base (Part A) to 1 part Hardener (Part B) VOLUME SOLIDS 92% ± 2.0 INDUCTION None POT LIFE 1 hr @ 75 o F VOC CATEGORY Less than 100 grams/liter FLASH POINT 91 o F SURFACE PREPARATION & APPLICATION INSTRUCTIONS Read label directions for detailed surface preparation & mixing instructions. Correct for the cause of any previous paint failures before applying this product. This coating must be blended before it can be used. Any mixture of components will have the hazards of all of the components. Before opening the packages, read all warning labels. Follow all precautions. RECOMMENDED PRIMERS RECOMMENDED APPLICATION Bare Metal: None Brush/Roller: As is after mixing containers thoroughly Bare Concrete: 197-8001 2K Waterborne Epoxy Sealer Squeegee/Trowel: As is after mixing containers thoroughly APPLICATION TEMP. Minimum: 50 o F Maximum: 90 o F STORAGE TEMP. Minimum: 50 o F Maximum: 90 o F TINTING Not to be tinted DRYING TIME To Recoat: Not normally necessary (Good Conditions) Light Duty: 1-2 days Normal Use: 3-5 days PRACTICAL 30-50 sq.ft./gal. (Depends on application REDUCTION None COVERAGE method and substrate texture and porosity) RECOMMENDED Wet: 30-50 mils (approx.. 1/32-1/16 ) CLEANUP Toluene or Methyl Ethyl Ketone (MEK) FILM PER COAT Dry: 28-46 mils PACKAGING AND DISTRIBUTION STANDARD 196-4392 196-4393 5 Gallon Kit 1 Gallon Kit PACKAGING FREIGHT CLASS Flammable Paint MSDS Available upon request A division of the Harrison Paint Co. 1329 Harrison Ave SW, Canton, OH 44706 Phone: (330) 455-5125 Customer Service: 1-800-321-0680 Fax: (330) 454-1750

TECHNICAL DATA SHEET Interior/Exterior 2K ACRYLIC ALIPHATIC POLYURETHANE 9925-99 10/06/14 DESCRIPTION Two-component, high-solids, interior/exterior, solventborne coating. Provides a high gloss finish with exceptional durability including outstanding gloss & color retention and chalk & fade resistance. Tough, abrasion, & impact resistant film withstands repeated cleaning & many chemicals. PRODUCT CHARACTERISTICS RECOMMENDED USES Use as a high-build, high gloss finish for concrete & metal surfaces. Recommended for industrial, commercial, & marine applications such as storage tanks, water towers, oil rigs, bridges, tools & equipment, pipes, & buildings. Ideal for exterior exposures where a high performance coating with excellent weathering characteristics is desired. PRODUCTS/COLORS FINISH High Gloss Base (Part A): 9925-99 Tintable White 9925-94 Deep Tint Base VEHICLE Acrylic Polyurethane (Aliphatic Isocyanate) 9925-95 Clear Tint Base FORMULATION Formulated without lead, chrome and mercury Hardener (Part B): 9925-00 Clear PHYSICAL DATA (Mixed Components) VOLUME SOLIDS 62% ± 2.0 MIX RATIO 4 parts Base (Part A) : 1 part Hardener (Part B) FLASH POINT 66 o F INDUCTION None POT LIFE 4-6 hrs @ 75 o F VOC (Theoretical) 323 grams/liter (mixed) Note: Mix ratio is by volume. Do Not vary proportions. Note: Data listed is for 9925-99 Tintable White. Other products in the line will be similar but will vary from these values. SURFACE PREPARATION & APPLICATION INSTRUCTIONS Read label directions for detailed surface preparation & mixing instructions. Correct for the cause of any previous paint failures before applying this product. New concrete & masonry must age a minimum of 28 days before coating. This coating must be blended before it can be used. Any mixture of components will have the hazards of all of the components. Before opening the packages, read all warning labels. Follow all precautions. RECOMMENDED PRIMERS Bare Ferrous & Aluminum Metal Bare Galvanizing Bare Concrete Cement Block None required (Epoxy or Inorganic Zinc primers may be used for added corrosion resistance) Contact representative None required None required (Block filler may be used for a smoother surface) RECOMMENDED APPLICATION Brush, Roller, Conventional & Airless Spray. Thin up to 10% by volume for brushing/rolling & 20% for spraying with Methyl Ethyl Ketone (MEK). Do Not thin beyond the VOC limits for the locality where the coating is being applied! APPLICATION TEMP. Minimum: 50 o F Maximum: 120 o F STORAGE TEMP. Minimum: 50 o F Maximum: 90 o F TINTING May be tinted with approved colorants DRYING TIME To Recoat: 8 hrs. min. 48 hrs. max. (Chromaflo 844 line suggested) (Good Conditions) Hard: 2-3 days PRACTICAL 200-500 sq. ft./gal. REDUCTION See application above COVERAGE (Depends on substrate texture and porosity) RECOMMENDED Wet: 3.2-8.0 mils CLEANUP Xylene and MEK FILM PER COAT Dry: 2.0-5.0 mils PACKAGING AND DISTRIBUTION STANDARD 9925-99 9925-94 9925-95 5 Gallon Kit 1 Gallon Kit PACKAGING FREIGHT CLASS Flammable Paint MSDS Available upon request A division of the Harrison Paint Co. 1329 Harrison Ave SW, Canton, OH 44706 Phone: (330) 455-5125 Customer Service: 1-800-321-0680 Fax: (330) 454-1750

Technical Data Sheet Product #: Product Name: Description: 196-4177 Clear High Gloss 196-4205 Clear Flat 2K Waterborne Aliphatic Polyurethane A zero VOC, zero HAPs, low odor, catalyzed waterborne polyurethane. This product exhibits outstanding film hardness, impact, abrasion, corrosion, chemical, solvent, and UV resistance. It can be applied to interior or exterior, vertical or horizontal surfaces such as concrete, masonry, wood, aluminum, ferrous metal, and VCT. Excellent for use on floors or as a general purpose maintenance coating in industrial, commercial, and residential settings. Resists hot tire pick-up. Properties: Physical: Application: Color: Clear Viscosity: As is Weight/Gallon: 9.0 +/- 0.25 lbs./gal. (mixed) Reduction: 8 fl oz per gallon for spraying Viscosity: 80-85 KU (mixed) Reducer: Water Gloss: High Gloss >90% Clean Up: Soap and water Flat <6% Application Method: Brush/Roll/Spray Weight Solids: 54% +/- 2.0 (mixed) Coverage (sq.ft./gallon): 325-500/coat (2 coats required) Volume Solids: 47% +/- 2.0 (mixed) Wet Film Thickness: 3.0-5.0 mils/coat Pot Life: 1-2 hours @ 77 o F Dry Film Thickness: 1.4-2.3 mils/coat Mix Ratio: (by Volume) 80 oz Part A : 32 oz Part B Dry to Recoat: 4-6 hours (ideally) Mixing Time: 3-5 minutes 12 hours (required) Induction Time: None Salt Fog (ASTM B117): Passes 1000 hours VOC (theoretical): Zero Dry for light foot traffic: 24 hours Flash Point: 330 o F Dry for full foot traffic: 48 hours Shelf Life: 1 year minimum in unopened Full Cure: 5 days Storage: container at 77 o F. Store at 60-80 o F in a dry place out of direct sunlight Note: Drying times are at 70 o F and 58% RH. Cool temperatures, high humidity, poor ventilation or heavy film thicknesses will extend dry times. Warmer temperatures and lower humidity will decrease dry times. Also Available: Notes: Mix Part A thoroughly then add the full contents of Part B to Part A and blend completely (3-5 minutes). A drill mounted impeller is recommended for best mixing. Do not add water to individual components. If needed for spraying, up to 8 fl. oz. of water may be stirred into the blended mixture. Apply when air and surface temperatures are 50-90 o F and the relative humidity is less than 85%. Do not apply if rain is expected within 48 hours of application. Two coats are required at the recommended spreading rate. Do not exceed spreading rate as this may cause pinholes, micro-blistering, or a milky appearance. If over 12 hours lapses between coats, lightly scuff sand the surface and remove all dust before applying the next coat. Special colors. Contact us for details. The information and data given herein are based upon tests and reports considered reliable and believed to be accurate. However, due to circumstances beyond our control including but not limited to surface preparation, application technique, substrate and curing conditions, no guarantee of duplicate performance, expressed or implied, is made. Revised: 10/25/13 Harrison Paint Company 1329 Harrison Avenue SW, Canton, OH 44706-1596 330-455-5125 Fax 330-454-1750