FOUR TIME FIE FOUNDATION NATIONAL AWARD WINNER Roboturn Smart Automated Turning Solutions with IoTQ TRANSFORMING Manufacturing... Smartly!
L-Series has Double or Four Spindle machines with Linear Tooling. Ideally suited for small jobs having cycle time less than 30 seconds per setup. When to Select: a) Cycle time per setup <30 Secs. b) Unbalanced machining times for both setup, e.g. - 18 secs. for 1st & 27 secs. for second setup Note: Balanced time on both spindles is not required in this case as machining carried out on one side while Robot loading/unloading on second side. SPECIFICATIONS DS-450 Quattro 4S CAPACITY Maximum Turning Dia. (mm 200 175 Maximum Turning Length (mm) 150 125 Chuck Size (mm) 165/200 165 Bed Type True Slant Bed True Slant Bed Slant Angle (Degrees) 60 60 MAIN SPINDLE Spindle Nose (Standard) A2-6 A2-5 SPINDLE DRIVE Spindle Motor rated power (KW) 7.5/11 7.5/11, 11/15 Inf. Variable speed range (rpm) 100-4000 100-4000 AXIS SLIDES X-axis stroke (mm) 450 350 Max. Tools/Side 8 6 Rapid Traverse X/Z (m/min.) 24 24 Note:Product improvement is a continuous process at Marshall. Design and Specifications are therefore, subject to change, without prior notice www.marshallcnc.com
T-Series Double Spindle machines with Double Turrets. These are most suitable for medium and large sized jobs where cycle time per setup is greater than 30 seconds. SPECIFICATIONS Model TWINTURN-6TT TWINTURN - 8TT TWINTURN-12T TWINTURN XL CAPACITY Swing Over Carriage Cover (mm) 360 360 430 600 Maximum Turning Dia. (mm) 210 260/320 400 550 Maximum Turning Length (mm) 350 350 with Tailstock (without Tailstock in case of 12T & XL) mm 200 200 MAIN SPINDLE Spindle Nose (Standard) A2-5 A2-6 A2-8 A2-11 Front Bearing Bore (mm) 85 100 110 150 Maximum Bar Capacity (Std.) (mm) 40 52 66 90 SPINDLE DRIVE Spindle Motor rated power (KW) 7.5/11 11/15 11/15, 15/18.5 18.5/25 Inf. Variable speed range (rpm) 100-4000 100-3200 50-2500 30-1800 RAPID TRAVERSE STANDARD X-axis (m/min.) 24 24 20 20 Z-axis (m/min.) 24 24 20 20 TOOL TURRET No. of Stations (Std.) 8 8 8 12 Tool Cross Section 25x25 25x25 25x25, 32x32 32x32 Max. Boring Bar Dia. 40 40 40, 50 50 POSITIONING REPEATABILITY X-axis ± 1.5 Microns ± 1.5 Microns ± 1.5 Microns ± 1.5 Microns Z-axis ± 2 Microns ± 2 Microns ± 2 Microns ± 2 Microns CNC Controls: SIEMENS 828D (SL) / FANUC 0i mate TD Weight (approx.) (Kg) 5000 6000 8000 15000 Note - Product improvement is a continuous process at Marshall. Design & Specifications are therefore, subject to change, without prior notice. headoffice@marshallcnc.com
Roboturn Most Versatile automated twin spindle turning center in the world. Twin Spindles for completing job (OP 10 + OP 20) on the machine. Roof mounted 6 Axis Robot with 7 th Linear Axis for covering wide area. Multiple functions of Robot: Tending to two spindles, cleaning station, Measurement Station & Laser marking station (for traceability) SmartCorrect Gauging Station Integrated with Cleaning Station & Laser Marking for job traceability www.marshallcnc.com
Roboturn Robot changes Grippers in 2 seconds to perform flexible tasks World s first Travelling Column Turning Center (Patent Applied) - Excellent for Automated Cells with Rear Loading headoffice@marshallcnc.com
Lines & Cells Roboturn Lines for Piston Insert Roboturn Xl Cell for Alloy Wheel Roboturn Cell for Motorcycle crankshaft Roboturn Q6 for PRG (Piston Rod Guide) Roboturn Cell for Spindle Roboturn 6T for Inner Ring Roboturn 8TT for Bearing Rings Roboturn DS-400 for Bearing Ring www.marshallcnc.com
Roboturn DS-400 for Sprocket Roboturn 8T for Ring Gear Roboturn 6TT for King Pin Roboturn Cell for Pinion Shaft Roboturn L8 for SS watch case Roboturn Cell for Transmission Gear Roboturn 8T Cell for Round Flange Roboturn 8T for FAG Outer headoffice@marshallcnc.com
MAKE ON Head Office & Works C 86, Phase-V, Focal Point, Ludhiana 141 010 India Phone: +91 161 5012406, 5012407, 5019648 Email: headoffice@marshallcnc.com National Sales, Services & IoTQ Center 75-B, Sector 5, IMT Manesar, Distt. Gurgaon Phone: +91-0124-4241813,14,15, Cell: +91-96502 93942, Automated Solutions Division (Unit II) D-116A, Phase-V, Focal Point Ludhiana-141010. INDIA marshallcnc.com marshallcnc.in marshallautomation.in Regd. Office 415, Lakehill Court, Johns Creek, GEORGIA 30022 (USA) Phone: 404-394-6678 info@marshallautomationamerica.com marshallautomationamerica.com Smart CNC Automation & Gauging Solutions