FELDER VIC Pty Ltd ABN 331 24 283 441 18 Chingford St Fairfield VIC 3078 Tel.: 03 9018 8346 E-mail: FelderVic@gmail.com Homepage: www.feldervic.com.au O F F E R Offer no. Customer number Machines 4 U Date Your rep Page 1 of 7 JP20/091601T/t HAMMER COMBINATION-MACHINE C3-31 The new C3 31 combination machine offers everything the enthusiast desires Image may be pictured with additional options.
Standard Equipment Page 2 of 7 Planer/thicknesser unit: planing width 310 mm (12 ) surface planer table length 1400 mm (55 ) thickness planing width 306 mm (12 ) Thicknessing height 4-225 mm (0,15-8 3/4 ) Max. depth of cut 4 mm (0,2 ) Synchronized feeder drive 6 (7.2) m/min when 50 (60) Hz Planer fence tilts from 90 to 45 1150 mm anodised planer fence Dual lifting planer tables Cutterblock: 3 knife quick-change, self-setting cutterblock system 310 mm: The 3 knife quick-change, self-setting cutterblock system enables simple and accurate planer knife changes in seconds. Circular saw unit: Tiltable saw unit 90-45, cutting height 103 mm (4 ) Saw blade diameter 250-315 mm (10-12 ) Riving knives 2,6 mm (0,10 ) Circular saw shaft Diameter 30 mm Saw unit speed 4800 rpm Combination fence The fence can be pivoted from 90 to 45. spindle fence plate 150 x 1150 mm - Cutting width continuously adjustable 0 600 mm
Standard Equipment Page 3 of 7 Spindle moulder unit: The heavy, double sided cast iron suspension of the spindle moulder unit provides stability and runs smoothly and quietly. 100 mm maximum above table operating height Rigid spindle moulder unit Manual height adjustment - Infinitely variable with system handwheel 180 mm cast iron table opening 4 speeds 3000, 6000, 8000 and 10,000 rpm Spindle Moulder Fence 220 The spindle moulder fence is appropriate for tooling with a diameter of up to 220 mm. The spindle moulder guard is mounted to the spindle moulder fence lid on the spindle moulder fence Slot and tenon table - Format sliding table 800 mm anodised: cutting length 865 mm Crosscut fence: 900 mm crosscut fence for all sliding tables
Optional specification for Comfort Page 4 of 7 Number @153-1 Piece Motor 1x 230 V S6 50 Hz 4HP 3.0 kw Number 902-1 Piece User manual English Number 204-1 Piece Number 44-1 Piece Silent-POWER spiral cutterblock The new Silent-POWER spiral knife cutterblock, exclusively for planing machines from the Felder-GroupThe advantages at a glance:- Extremely quiet, noise is reduced by half- Usable blade life twenty times longer than standard blades- Larger chip space- Tear free planing results- Four-sided blades- Reduced power consumption Number 74-1 Piece Mechanical scoring unit, scoring blade dia. 80 mm Number 82-1 Piece Preparation for Dado tooling up to 19.5 mm width Number 100-1 Piece Moulder spindle dia. 30 mm, usable height 100 mm Number 132-1 Piece Format sliding table 2000 mm, cutting length 2050 mm* Number 160-1 Piece Outrigger table 1100
Chosen specification Page 5 of 7 Number 168-1 Piece Crosscut fence 1300 mm for outrigger table instead of crosscut fence 900 mm (#160) Number 163-1 Piece Precision mitre guide index system (#160/161) Number 190-1 Piece Mortising table Number 191-1 Piece Mortising chuck 0-16 mm Number 210-1 Piece Rolling carriage without lifting bar Number 211-1 Piece Lifting bar Number 221-1 Piece Preparation for Container Transport Number 223-1 Piece Heat treated palette according to IPPC regulations Subtotal To customer spec Net amount + 10% GST Total amount (AUD)
Page 6 of 7 All electrical work has to be performed by a certified electrician!!! The motor rating is 19amps. Please connect machine to a 20amp circuit The Machines are rated for 230V +/-10%. If operated outside these tolerances the warranty for the elctrical components is void. Longer cables, plug points, wall sockets and their installation are the responsiblity of the client!!! Please use a voltage stabilizer if in doubt about your power supply!!! The goods stay in property of FELDER VIC until they are paid in full. Delivery time Validity of Offer Stock to to order For all technical details, please refer to the "HAMMER catalogue". We thank you for your interest and trust this quotation will meet your satisfaction. The Felder VIC - TEAM would be pleased to assist you with any further information you may require. With kind regards, Felder VIC Pty Ltd //AGB's
Page 7 of 7