S+B Maschinenhandelsgesellschaft mbh Becker-Göring-Str. 11 76307 Karlsbad Tel. (0049)7248-9172-0 Email info@sb-maschinen.de Internet www.sb-maschinen.de Stocklist Boring mills Machining Centers Drilling machines Machining Center - Universal y.o.m. x-travel y-travel z-travel DECKEL DMU 85 monoblock 2012 935 mm 850 mm 5-axis simultaneously machining center, Tandem drive NC-rotary-swivelling-table, A-axis +-120, C-axis 360, 3D-touch probe HEIDENHAIN TS 649, BLUM laser, 3D-quickset-software, spindle load display, MPC (machine protection control) software, signal lamp, "air clean" for cabin door, internal coolant supply 40bar, 600l incl. tempering of coolant, ring nozzle (coolant and air) flush gun, MQL (minimum quantity lubrication, internal air blast, ATC-software, safety glass DMG netservice, high accuracy package, approx. 36.500h "machine on", approx. 14.000 h "spindle on"! HSCI 650 mm DECKEL DMC 75 V linear 2007 885 mm 600 mm 5-axis machining center with controlled head -10 to +110 3D-touch probe M&H 25.10,, internal coolant supply 40bar, 900l, BLUM Laser, LAN interface, ATC software, oilmist suction, approx. 56.500h "machine on", approx. 28.000h "spindle on", last spindle change in 2015, run approx. 6.000h since that time 600 mm HERMLE C 800 U 1996 800 mm 600 mm 4-axis universal machining center, NC-swivelling table, rigid table (upgraded in 2007) internal coolant device, tool breakage-control (upgraded in 2002), el. compensation of thermal expansion, el. handwheel SIEMENS, flush gun, oilmist suction, autom. door (upgraded in 2001) approx. h "machine on", approx. h "spindle on", SIEMENS 840D 500 mm S+B Maschinenhandels GmbH 112
Boring mills Machining Centers Drilling machines Machining Center - Universal y.o.m. x-travel y-travel z-travel GROB G 550 2010 800 mm 1020 mm 5-axis machine with controlled swivel-rotary table (AB-axis), milling head horizontal, 2-palet changer incl. 2 palets, 630 x 630 mm, integrated coolant-system with coolant tempering, chiller for spindle, B-axis and electrical cabinet, zero clamping system on rotary table, T-stots instead of grid pattern system, option KinematicOpt for optimal machine kinematic, tooling cleaner device, 3D touch probe M&H, airblast through spindle, flushgun, blow out nozzle, remote diagnostics, approx. 20.000h "machine on", approx. 10.000h "spindle on" 1020 mm HERMLE U 740 2005 740 mm 500 mm 5 -axis machining center, integrated round table and controlled head, tool measuring system BLUM Laser 1 pcs. flushgun, blast air from outside, no internal coolant supply, chip conveyor, approx. xxxxxx h "machine on", approx. xxxx h "spindle on" 500 mm DECKEL DMU 65 monoblock 2011 735 mm 650 mm 5-axis simultaneously machining center, NC-rotary-swivelling-table, A-axis +-120, C-axis 360, hydr. clamping of swivelling table, 3D-touch probe HEIDENHAIN TS 649, flush gun, flushing of working area, sealing air in x y z, ATC-software, signal lamp integrated in door, ONLY approx.16.200h "machine on", approx. 5.300 h "spindle on"! Internal Coolant Supply with filter 40 bar. ( new, Original DMG) EUR 18.000,-- 560 mm MIKRON HPM 600U 2008 650 mm 650 mm 5-axis simultaneously universal-machining center, with NC-rotary-swivelling-table A-axis +91-121 (150 sec), C-axis 360 (210 sec), internal coolant supply 18-70bar, compressed air supply outside, infrared touchprobe M&H PS 32.00, flushgun, auto. cabin top, oilmist extractor, MQL (minimal quantity lubrication) laser, approx. 48.000h "machine on", approx. 12.000h "spindle on" 550 mm S+B Maschinenhandels GmbH 212
Boring mills Machining Centers Drilling machines Machining Center - Universal y.o.m. x-travel y-travel z-travel DECKEL DMU 60 T 2001 630 mm 560 mm universal machining center, DRO for manually adjustable milling head, internal coolant supply, chip conveyor, ONLY approx.? hours "machine on", approx. 6.200 hours "spindle on" HEIDENHAIN TNC 426 560 mm EMCO LINEARMILL 600HD 2007 600 mm 500 mm 5-axis simultaneously machining center, NC-round-swivelling table -100+122, internal coolant supply 15 bar 400l incl. cartridge filter, 3 D touch probe HEIDENHAIN TS 440, approx. 80.000h "machine on", approx. 30.000h "spindle on" 500 mm DECKEL DMF 180 2011 1800 mm 700 mm 5 axis simultaneously with integrated NC-roundtable dia. 750mm and B-axis, Internal Coolant supply 40 bar, 600l, B - axis +-100, Swarf Conveyer ROTOCLEAR, el. handwheel 3D touchprobe TS 649 HEIDENHAIN, prepared for 3D quickset, airblast through spindle, tropical package, approx. 23.500h machine on, 11.500h spindle on SIEMENS 840D solutionline 700 mm DECKEL MAHO DMU 200 P 2000 1800 mm 2000 mm 5-axis CNC universal maching center, simultaneously, NC-rotary table 1.700 x 1.400mm (360000 x 0,001 indexing), Universal milling head with controlled B-axis (0,001 ), mode 4 3D probe infrared HEIDENHAIN, BLUM-laser, flush-gun, oilmist suction, 1100 mm approx. 88.500h "machine on", approx. 39.300h "spindle on" under power in factory till July 2018 HEIDENHAIN TNC 430 ANAYAK VH 1800 2004 1600 mm 920 mm CNC-universal machining center (bed-milling type), autom. milling head horizontalvertical, el. handwheel HR 410, no internal coolant supply 10bar, approx. 38.600h "machine on", approx. 12.800h "spindle on" HEIDENHAIN TNC 430 900 mm S+B Maschinenhandels GmbH 312
Boring mills Machining Centers Drilling machines Machining Center - Universal y.o.m. x-travel y-travel z-travel DECKEL MAHO DMC 160 FD duoblock 2005 1600 mm 1250 mm 5-axis CNC universal turning-milling center, Universal milling head with controlled B-axis (0,001 ) NC-rotarymilling table Ø 1400mm with 2 pos. pallet-changer, setup station with increased accuracy, internal coolant supply 900l, 4080 bar 3D touch probe, BLUM laser, oilmist suction, airblast through spindle, autom. "openclose" of right door, DMG netservice, 2nd processor, DMG toolagent, flush gun, increased table rpm from 250 to 300 1min (table load max. 2 to.), approx. 38.800h "machine on", approx. 12.200h "spindle on" MILLPLUS it 1000 mm DOOSAN MYNX 650 2008 1300 mm 650 mm vertical machining center, prepared for 4th + 5th axis, internal coolant supply 20 bar, manually dividing device, approx. h "machine on", approx. h "spindle on" FANUC 21i MB 625 mm Machining Center - Vertical y.o.m. x-travel y-travel z-travel CHEVALIER 2033 VMC 1998 850 mm 500 mm el. handwheel heidenhain 50 pcs. toolholder SK 40 ( see the picture ) new controlpanel and new TFT screen Heidenhain HEIDENHAIN TNC 410 500 mm DECKEL DMC 635 V eco 2010 635 mm 510 mm 4. axis dividing atchment direct measuring system Air purge for measuring systems internal cooling system 20 bar chip conveyor signal lamp BA 4 electronic handwheel hours main-swich "on" 42.206 h hours spindle "on" 23.736 h SIEMENS 810 D shopmill 460 mm DECKEL DMC 635 V eco 2008 635 mm 510 mm 3-axis vertical machining center, direct measuring system, Air purge for measuring systems, chip conveyor, signal lamp, hours main-swich "on" h hours spindle "on" h FANUC 0i-MC 460 mm S+B Maschinenhandels GmbH 412
Boring mills Machining Centers Drilling machines Machining Center - Vertical y.o.m. longitudinal cross vertical DECKEL-MAHO DMC 635 V 2006 635 mm 510 mm vertical machining center prepared for 4th axis, flush gun, flushing of working area, approx. 10.500 h machine on, approx. 4.500 h spindle on SIEMENS 840 D shopmill 460 mm IXION BAZ 325 1995 600 mm 400 mm vertical machining center, el. handwheel HEIDENHAIN, coolant device HEIDENHAIN TNC 415 650 mm SUPERMAX FV 56A 2000 560 mm 410 mm vertical machining center, no operating hours meter FANUC O-M 450 mm BRIDGEPORT VMC 500 XP 2002 500 mm 340 mm vertival machining center, laser, approx. 44.100h "machine on", approx. 15.700h "spindle on" on counter HEIDENHAIN TNC 426430 520 mm DECKEL DMF 360 linear 2004 3.600 mm 920 mm internal cooling device 40 bar, coolant 600l, chip conveyor, infrared touch probe TS 641, DMG netservice, 2nd processor with WINDOWS 2000, twin table machining incl. separating plate, flush gun, tool magazin for 120 tools, approx. 40.000 switch on hours, 19.500 spindle hours SIEMENS 840D powerline 820 mm AXA VSC 1 M 1995 2240 mm 420 mm vertikal machining center with 4th axis (NC-dividing device with SK 50 taper), table size 3.350 (1.350 + 1000 + 1000) x 500mm, internal coolant supply, twin table machining possible, direct measuring system, el handwheel, approx. 9.500 working hours (hour counter) SIEMENS 810MGA3 480 mm S+B Maschinenhandels GmbH 512
Boring mills Machining Centers Drilling machines Machining Center - Vertical y.o.m. x-travel y-travel z-travel DECKEL MAHO DMG DMF 220 linear 2008 2200 mm 560 mm direct measuring system, internal coolant supply 40bar 600l, chip conveyor, Ethernet interface, NFS Server software WINDOWS, 3D touch probe TS 649, twin table machining possible, el. handwheel HR 410, spraygun, Rotoclear, PARTS CHANGED May 2017: Milling spindle and guideways X! 720 mm approx. 25.000 hours "machine on", approx. 8.100 hours "machine on itnc 530 Heidenhain CORREA EURO 2000 2001 2.000 mm 1.250 mm 3-axis vertical machining center, electron. handwheel, 3D touch probe, INCL. NEW REPLACEMENT SPINDLE! approx. 38.500h "machine on", approx. 17.000h "spindle on" HEIDENHAIN TNC 426 650 mm DECKEL DMC 100 V hi dyn 2002 1000 mm 800 mm vertical machining center, Swarf Conveyer, hand wheel HEIDENHAIN HR 410, Touch probe HEIDENHAIN TT 140 for Tool Measurement, Mode 4 for reduced speed working with open doors, Approx 19.973 Spindle hours, approx 42.979 Hours "Machine on" 560 mm Jig Boring Machine y.o.m. x-travel y-travel z-travel FEHLMANN PICOMAX 100 CNC 3 1989 1000 mm 435 mm 4-axis CNC jig boring machine, incl. CNC-controled rotary table (A-axis), electr. Handwheel, direct measuring system in X+Y, indirect measuring system in Z, manuals, approx. 34.300 working hours (on hour counter) HEIDENHAIN TNC 155 210 mm Portal - Machining Center y.o.m. x-travel y-travel z-travel KONDIA HM 2010 2011 2.000 mm 1.000 mm 3-axis vertical machining center, direct measuring system, electron. handwheel HR 410, internal coolant supply 40bar, software option2, BLUM laser, prepared for 4. axis, internal air-blast supply, glass windows, approx. 28.000h "machine on", approx. 15.000h "spindle on" price of new machine around EUR 290.000,-- 510 mm S+B Maschinenhandels GmbH 612
Boring mills Machining Centers Drilling machines Portal - Machining Center y.o.m. x-travel y-travel z-travel Erosion machines Cavity Sinking EDM - Machine y.o.m. table table width ampere KING SPARK D 33 F 2008 450 mm 210 mm Start Hole Erosion Machine, y.o.m. unknown, around 2005 Cooling System 20 Liter ( Inside of the Machine-Body ) 30 A KUO Spark Grinding machines Surface Grinding Machine y.o.m. grinding grinding width workpiece height ABA FFU 400060 1985 4000 mm 600 mm surface grinding machine, Magnet 4000 x 500mm, coolant device + paper filter, separately power pack, NEW CONTROL in 2013! ABA 500 mm MININI PL 8.32 CNC 2007 3150 mm 800 mm surface grinding machine, CNC Flachschleifmaschine, coolant device 2.500l, magnetical adhesive force control, semi automatic balancing system, SIEMENS 840D 650 mm BLOHM HANSEAT 75 1992 800 mm coolant device, balancing device, 2 grinding flanges, electrical cabinet: 1200 x 400 x 2000mm mm 550 500 mm Internal Grinding Machine - vertical y.o.m. internal diameter grinding depth max. workpiece diameter EMAG REINECKER VSC 250 IS 1999 250 mm 200 mm 2011 partially overhauled (headstock and feed drive Z-axis) SIEMENS 840D 260 mm Crankshaft Grinding Machine y.o.m. workpiece swing dia. clamping JUNKER JUCRANK 500250 1997 900 mm 150 mm 900 mm FANUC Panel i S+B Maschinenhandels GmbH 712
Grinding machines Crankshaft Grinding Machine y.o.m. workpiece swing dia. clamping JUNKER JUCRANK 500250 1997 900 mm 150 mm 900 mm FANUC Panel i JUNKER JUCRANK 500250 1998 900 mm 150 mm 900 mm FANUC Panel i JUNKER JUCRANK 500250 1999 1200 Reciprocating grinding with "CBN". Grinding machine for cylindrical-, face- and non-circular grinding operations on Crankshafts and Eccentric Shafts. FANUC 160 C mm 12 x 10 x 4 m 100 kw Cylindrical Grinding Machine y.o.m. workpiece swing dia. clamping JUNKER JUCRANK 500250 2001 700 mm 170 mm Cylindrical Grinder for grinding of high precision workpiece 2 pcs. caliper Marpos Movomatic TID 10 for measuring of diameter C-Axis with hydraulic chuck Heilig 40 bar locking pressure efficient exentric grinding at workpiece drive 52 1min Grinding wheel 1 on B - axis controled ( inclined + straight ) Grinding wheel 2 on B - axis controled ( inclined + straight ) Automatic balancing Dittel Worked with cutting oil Well maintained, first hand The machine was connected to central cooling unit FANUC Series 160 -T 700 mm GST GST S2-750500165S 2002 320 mm 500 mm 165 mm SIEMENS 840D JUNKER BUAJ 30 cnc 1998 300 mm 630 mm 150 mm FANUC 0-GC JUNKER Quickpoint 500220 1996 280 mm 1000 mm 140 mm FANUC 15 T Cylindrical Grinding Machine - Universal y.o.m. grinding diameter grinding centre height STUDER S 40-2 1991 340 mm 1600 mm universal cylindrical grinding machine Internal grinding device, max. grinding by infeed grinding 80mm, grinding spindle head swivelable 0-180, SONY DRO, DITTEL balancing device, semi-automatic dressing, Coolant device with paper filter, 53.700 hours "machine on" 175 mm S+B Maschinenhandels GmbH 812
Grinding machines Cylindrical Grinding Machine - Universal y.o.m. grinding diameter grinding centre height STUDER S 40-2 1991 340 mm 1000 mm universal cylindrical grinding machine Internal grinding device, max. grinding by infeed grinding 80mm, grinding spindle head swivelable 0-180, SONY DRO, Coolant device with paper filter, lots of accessories, 26.500 hours "machine on" 175 mm Surface Grinding Machine - Vertical y.o.m. grinding grinding width workpiece height KEHREN L 20 B 1978 2000 mm 500 mm coolant device, top magnet with prism 2000 x 400mm, segment grinding head D 450m, 600 mm Lathes CNC Turning- and Milling Center y.o.m. turning diameter turning control DOOSAN PUMA 2600 LY 2012 376 mm 1.280 mm CNC lathe, live tooling, C-axis, Y-axis, tooleye, incl. 4 pcs. driven tools ( 2 radial + 2 axial ) approx. 7.000 working hours DOOSAN FANUC I-series DOOSAN PUMA TT 1800 SY 2014 230 mm 230 mm CNC-turning-center with 2 turrets, 2x 12-pockets (2x24 if using intermediate positions) turret with 12 livetools, C1,C2 axis, partcatcher, barloader TOP AUTOMAZIONI XSF 365DX (y.o.m. 2014) accessories : 4 pcs. driven tools ( straight ) 5 pcs. driven tools ( 90 degr. ) 18 pcs. tool holder ( drilling and cutting ) approx. 10.000h "machine on" FANUC 31i B MORI SEIKI NZ 1500 T2Y2 2008 200 CNC - lathe with 2 turrets, 2x Y-axis and subspindle, Y - axis 110mm, C-axis, KITAGAWA 6, 3-jaw chuck on main- and subspindle, internal coolant supply 20bar, parts catcher for main- and subspindle, barloader, approx. 24.000h "machine on", approx. 9.800h "spindle on" mm 1.130 810 mm MSX 701 III MAPPS III S+B Maschinenhandels GmbH 912
Lathes CNC Turning- and Milling Center y.o.m. turning diameter turning control MSX 701 III CNC Lathe - Inclined Bed Type y.o.m. turning diameter turning control GILDEMEISTER CTX 500 1992 600 mm 1000 mm CNC lathe, no live tools, coolant tank, tailstock, hollow clamping cylinder, approx. 67.500hours "machine on" (as of November 2017) EPL2 EPL 2 GILDEMEISTER CTX 620 V4-1m linear 2004 500 mm 1080 mm CNC lathe tailstock, live tools, Y-axis, C-axis, 3-jaw chuck SMW AUTOBLOK 400BH (400 118mm), hollow clamping device, differential pressure clamping, coolant pump 12bar, prepared for oilmist suction, accessories: some jaws approx. 26.500 h "machine on", approx. 12.600 h "spindle on" SIEMENS 840D powerline SIEMENS 840D SIEME shopturn SCHAUBLIN 110 CNC 1998 32 mm 295 mm 30-6000 Umin collets FANUC 18 TB AVM ANGELINI CLIPPER 2006 160 mm 250 mm CNC lathe, live tools, coolant tank, tailstock, FANUC 21 itb Lathe - cycle controled y.o.m. turning diameter turning control WEILER E 80 x 3000 2006 510 mm 3000 mm teach in lathe, without chuck and steady spindle nose DIN 55026 size 15, max. chuck size 400mm, CAPTO toolholder system without accessories, approx. 38.000 working hours on hour meter S+B Maschinenhandels GmbH 1012
Lathes Lathe - cycle controled y.o.m. turning diameter turning control SIEMENS 810 Center Lathe y.o.m. turning diameter over bed turning diameter over slide rest turning WEISSER HEILBRONN Goliath 1981 450 mm 250 mm Accessories: 3- jaw chuck SCHUNK D = 315 mm 4 pcs. toolholder System IDEAL Manual Cooling-System 2000 mm WEILER Commodor 75 1979 380 mm 190 mm 24 speed steps, spindle brake, tailstock with sleeve, plane and cross feed, coolant device, toolholder-system MULTIFIX incl. 4 pcs. toolholder 180 mm Milling machines Universal Milling Machine y.o.m. x-travel y-travel z-travel REIDEN BFR 1 1999 1200 mm 600 mm milling head autom. horizontal vertical, manually indexing 2,5 paper-filter, 8.800 working hours HEIDENHAIN TNC 426 700 mm Other machines Revolving Indexing Machine y.o.m. spindle taper spindle stroke number of spindles S+B Maschinenhandels GmbH 1112
Other machines Revolving Indexing Machine y.o.m. spindle taper spindle stroke number of spindles EUBAMA S 20 1979 Spannzangecolle The machine has been constructed for the metal cutting process of t workpieces in one clamping session. First step ist the cutting of the work piece from the bar which is coming from the IEMCA Bar Loader T 56040P 100 mm 11 Stück Technical description of a workpiece which is epuiped at the machine at the moment: processing units: station 1 station 2 station 3 station 4 station 5 station 6 station 7 station 8 station 9 station 10 station 11 station 12 bucking of the bar material coming from the bar loader piecing of cone milling 1 various milling 2 various milling 3 various piecing of cone thread milling free no working cross bore free no working grinding knock out Machine is equipped with a feeding-and unloading unit for workpieces. incl. chip conveyer with magnetic absorber incl. filter mist system incl. full machine cover Iemca Loader T 560 40 P Dia max 40 mm Saws Band Saw - Automatic y.o.m. weight of the machine ca. sawing motor total power requirement KASTO - AUTOMAT HBA 520 AU 1998 4200 kg 7,5 kw 10,0 kw KASTO - AUTOMAT HBA 420 AU 1993 3360 kg 5,5 kw Bandsaw automatic, min. offcut (single step): 10mm, min offcut (automatic mode): 80mm, roller track 2000mm, chip removal brush, bundle sawing device, max. passage 480mm (width and height), 8 kw S+B Maschinenhandels GmbH 1212