2D Imaging Barcode Scanner Programming 1 Advanced Handheld High Speed Laser Scanner
This Programming Guide is intended for: 2D Image Hands Free Scanner: Z 8072 Plus Revision History Changes to the original manual are listed below: Version Date Description of Version 1.0 2018/08/16 Initial release 1 Advanced Handheld High Speed Laser Scanner
PROGRAMMING GUIDE Important Notice No warranty of any kind is made in regard to this material, including, but not limited to, implied warranties of merchantability or fitness for any particular purpose. We are not liable for any errors contained herein nor for incidental or consequential damages in connection with furnishing, performance or use of this material. We shall be under no liability in respect of any defect arising from fair wear and tear, willful damage, negligence, abnormal working conditions, failure to follow the instructions and warnings, or misuse or alteration or repair of the products without written approval. No part of this document may be reproduced, transmitted, stored in a retrieval system, transcribed, or translated into any human or computer or other language in any form or by any means electronic, mechanical, magnetic, optical, chemical, biological, manual or otherwise, except for brief passages which may be quoted for purposes of scholastic or literary review, without express written consent and authorization. We reserve the right to make changes in product design without reservation and without notification. The material in this guide is for information only and is subject to change without notice. All trademarks mentioned herein, registered or otherwise, are the properties of their various, ill, assorted owners. General Handling Precautions Do not dispose the scanner in fire. Do not put the scanner directly in the sun or by any heat source. Do not use or store the scanner in a very humid place. Do not drop the scanner or allow it to collide violently with other objects. Do not take the scanner apart without authorization Guidance for Printing This manual is in A5 size. Please double check your printer setting before printing it out. When the barcodes are to be printed out for programming, the use of a high resolution laser printer is strongly suggested for the best scan result. Firmware Notice To use all functions in this guide please update to the latest firmware. Copyright 2018. All rights reserved. 2 Advanced 2D Image Scanner
Table of Contents Important Notice...2 General Handling Precautions...2 Guidance for Printing...2 Using the Scanner...7 Beeper Indication...7 tings and Programming...8 Program Up Flow...8 User Preferences...9 Show Version...9 System tings...9 Customer's Factory Default...10 Scan Mode...11 Same Code Delay Time for Continue Scan Mode...12 Interface Switch...13 Good Read Beep Length...14 Good Read Beep Frequency...15 Aiming Pattern...16 Motion Detect Sensibility...17 Phone Mode...18 Terminal Character...19 RS232 Baud Rate...20 RS232 Parity Bit...22 RS232 Stop Bit...23 RS232 Data Bit...24 USB Speed...25 Country Code...26 Persian/Arabic Language Encoding Support...31 Readable Symbologies...32 All Symbologies...32 UPC A...33 UPC E...34 EAN 8...35 EAN 13...36 JAN code for Books...37 Code 128...38 Code 39...39 Code 93...40 Code 32...41 Code 11...42 Codabar...43 Plessey...44 3 Advanced Handheld High Speed Laser Scanner
PROGRAMMING GUIDE MSI/Plessy...45 Interleaved 2 of 5...46 IATA 2 of 5...47 Matrix 2 of 5...48 Straight 2 of 5...49 RSS 14...50 RSS Expanded...51 RSS Limited...52 GS1 128 AIM ID...53 GS1 2D AIM ID...54 Component CC A...55 Component CC B...56 Component CC C...57 PDF417...58 Data Matrix...60 QR Code...61 Micro QR Code...62 Aztec...63 MaxiCode...64 Symbology Features...65 UPC / EAN...65 UPC A...66 UPC E...68 EAN 8...70 EAN 13... 71 EAN 13 Data Redundant Check...73 JAN code for Books Separator...74 Code 39...76 Code 39 Redundant Check...78 Codabar...79 Codabar Redundant Check...81 Interleaved 2 of 5...82 MSI / Plessey...84 Code 11...86 Data Matrix...88 QR / Micro QR...90 Japanese Language Encoding Support...92 Aztec...93 Data Editing (Prefix)...94 Prefix Up Flow...94 All Prefix...95 UPC / EAN Prefix...96 4 Advanced 2D Image Scanner
5 Code 128 Prefix...98 Code 39 Prefix...99 Code 93 Prefix...100 Code 32 Prefix...101 Code 11 Prefix...102 Codabar Prefix...103 Plessey Prefix...104 MSI Prefix...105 Interleaved 2 of 5Prefix...106 IATA 2 of 5 Prefix...107 Matrix 2 of 5 Prefix...108 Straight 2 of 5 Prefix...109 RSS 14 Prefix...110 RSS Expanded Prefix...111 RSS Limited Prefix...112 Component CC A Prefix...113 Component CC B Prefix...114 Component CC C Prefix...115 PDF 417 Prefix...116 Micro PDF 417 Prefix...117 Data Matrix Prefix...118 QR Prefix...119 Micro QR Prefix...120 Aztec Prefix...121 MaxiCode Prefix...122 Data Editing (Suffix)...123 Suffix Up Flow...123 All Suffix...124 UPC A Suffix...125 UPC E Suffix...126 EAN 8 Suffix...127 EAN 13 Suffix...128 Code 128 Suffix...129 Code 39 Suffix...130 Code 93 Suffix...131 Code 32 Suffix...132 Code 11 Suffix...133 Codabar Suffix...134 Plessey Suffix...135 MSI Suffix...136 Interleaved 2 of 5 Suffix...137 IATA 2 of 5 Suffix...138 Matrix 2 of 5 Suffix...139 Advanced Handheld High Speed Laser Scanner
PROGRAMMING GUIDE Straight 2 of 5 Suffix...140 RSS 14 Suffix...141 RSS Expanded Suffix...142 RSS Limited Suffix...143 Component CC A Suffix...144 Component CC B Suffix...145 Component CC C Suffix...146 PDF 417 Suffix...147 Micro PDF 417 Suffix...148 Data Matrix Suffix...149 QR Code Suffix...150 Micro QR Suffix...151 Aztec Suffix...152 MaxiCode Suffix...153 Code tings...154 Lengths for Codes...154 Lengths for Code 128...156 Lengths for Code 39...157 Lengths for Code 93...158 Lengths for Codabar...159 Lengths for Interleaved 2 of 5...160 Lengths for Code 11...161 Lengths for MSI...162 Lengths for Matrix 2 of 5...163 Code Identifiers...164 Code Identifiers Table...165 Keyboard Caps Lock State...166 Function Key Mapping...167 ASCII Code...168 JavaPOS Driver V2.00 for Win32/Win64...189 JavaPOS Version...189 Install the Java2 Runtime Environment...189 Install the Service Object and JavaPOS files...189 How to use RS232 scanner with JavaPOS Driver...189 Use barcodes to configure the Handheld scanner...190 Running the JavaPOS Test utility...191 How to use JavaPOS driver at your application...191 How to use USB scanner with JavaPOS Driver...192 Install the Java RXTXcomm API...193 Running the JavaPOS Test utility...193 How to Use JavaPOS Driver at your application...194 6 Advanced 2D Image Scanner
Using the Scanner Beeper Indication Beeps Indication 3 beeps in a series from low to Power up high pitch 1 short beep A barcode has been successfully decoded 2 short beeps The scanner has entered program mode 1 long beep A setting has been programmed 3 beeps in a series from low to high pitch The scanner has exited program mode 3 short beeps Error setting the scanner 7 Advanced Handheld High Speed Laser Scanner
PROGRAMMING GUIDE tings and Programming Scan selected barcodes in this manual to affect setup and programming of your handheld imaging barcode scanner. Decoding options and interface protocols can be tailored to a specific application. up parameters are stored in non volatile memory in the scanner and are retained even when power is off. up parameters change only when you reset them. You may need to hide adjacent code patches with your hand when scanning. Program Up Flow Scan "" to set up > Scan selected barcode > Scan "" to confirm the setup. 8 Advanced 2D Image Scanner
User Preferences Show Version Scan this barcode to display firmware version. Read device information System tings Scan this barcode to return all parameters to the default values. Factory default settings 9 Advanced Handheld High Speed Laser Scanner
PROGRAMMING GUIDE Customer's Factory Default Scan barcodes below to set or delete customer s factory default. Save customer's factory default Delete customer's factory default 10 Advanced 2D Image Scanner
Scan Mode Scan a barcodes below to set the scanner to different modes. Presentation and Continue Scan modes allow automatic scan when barcodes are present in front of the scanner. In Continue Scan mode, the scan LED stays active and continues to decode. Trigger mode allows triggered scans. Presentation Mode ( Default ) Continue Scan Mode 11 Advanced Handheld High Speed Laser Scanner
PROGRAMMING GUIDE Same Code Delay Time for Continue Scan Mode Scan a barcode below to select the duration of the delay time for scan code. 500 msec 1 sec (Default) 1.5 sec 2 sec 12 Advanced 2D Image Scanner
Interface Switch Your 2D Imager supports interfaces such as USB HID, RS232 serial, and USB virtual COM. To switch the interface, simply select the appropriate cable and configure the proper interface by following interface selection. RS 232 USB Keyboard (Default) USB Virtual COM Port *Driver required 13 Advanced Handheld High Speed Laser Scanner
PROGRAMMING GUIDE Good Read Beep Length Scan a barcode below to select the duration of the beep signal after a good decode. 50 msec (Default) 100 msec 150 msec 200 msec 14 Advanced 2D Image Scanner
Good Read Beep Frequency Scan a barcode below to select the beep tone of the beep signal after a good decode. Low Medium (Default) High 15 Advanced Handheld High Speed Laser Scanner
PROGRAMMING GUIDE Aiming Pattern Aiming pattern works as an aiming system to aid in barcode reading. Use the following settings to enable or disable this function. This function is for supporting models only. Auto Always Off (Default) 16 Advanced 2D Image Scanner
Motion Detect Sensibility Level 1 (Low) Level 2 Level 3 (default) Level 4 Level 5 (High) 17 Advanced Handheld High Speed Laser Scanner
PROGRAMMING GUIDE Phone Mode LED turns to orange when Phone mode is enabled. Phone key enable Trigger key is used for Phone mode switch Phone key disable (default) Trigger key is used for scanning Phone mode enable Phone mode disable (default) 18 Advanced 2D Image Scanner
Terminal Character None CR/LF (Default) CR TAB 19 Advanced Handheld High Speed Laser Scanner
PROGRAMMING GUIDE RS232 Baud Rate Baud rate is the number of bits of data transmitted per second. the imager's baud rate to match the baud rate setting of the host device. Otherwise, data may not reach the host device or may reach it in distorted form. 9600 19200 38400 57600 20 Advanced 2D Image Scanner
115200 (Default) 21 Advanced Handheld High Speed Laser Scanner
PROGRAMMING GUIDE RS232 Parity Bit Parity bit can be added to ensure the total number of the string is even or odd. None (Default) Even parity Odd parity 22 Advanced 2D Image Scanner
RS232 Stop Bit Stop bit is used to signal the end of a transmission. 1 Stop Bit (Default) 2 Stop Bit 23 Advanced Handheld High Speed Laser Scanner
PROGRAMMING GUIDE RS232 Data Bit Data bit sets the word length at 7 or 8 bits of data per character. CS7 CS8 (Default) 24 Advanced 2D Image Scanner
USB Speed USB 2.0 (Default) USB 1.1 25 Advanced Handheld High Speed Laser Scanner
PROGRAMMING GUIDE Country Code Scann the following settings to change the country code. US (Default) Belgium Britain Denmark 26 Advanced 2D Image Scanner
France Germany Italy Norway 27 Advanced Handheld High Speed Laser Scanner
PROGRAMMING GUIDE Portugal Spain Sweden Switzerland 28 Advanced 2D Image Scanner
Japan Hungary Czech Republic Slovakia 29 Advanced Handheld High Speed Laser Scanner
PROGRAMMING GUIDE Romania Croatia Poland 30 Advanced 2D Image Scanner
Persian/Arabic Language Encoding Support Scann the following settings to change the encoding options. UTF 8 (Default) ISO 8859 6 CP1256 (WINDOWS 1256) 31 Advanced Handheld High Speed Laser Scanner
PROGRAMMING GUIDE Readable Symbologies This section provides the programming barcodes for enabling and disabling readable symbologies. If the default values suit requirements, programming is not necessary. All Symbologies Enable All Default 32 Advanced 2D Image Scanner
UPC A Enable UPC A (Default) Disable UPC A 33 Advanced Handheld High Speed Laser Scanner
PROGRAMMING GUIDE UPC E Enable UPC E (Default) Disable UPC E 34 Advanced 2D Image Scanner
EAN 8 Enable EAN 8 (Default) Disable EAN 8 35 Advanced Handheld High Speed Laser Scanner
PROGRAMMING GUIDE EAN 13 Enable EAN 13 (Default) Disable EAN 13 36 Advanced 2D Image Scanner
JAN code for Books Enable Disable 37 Advanced Handheld High Speed Laser Scanner
PROGRAMMING GUIDE Code 128 Enable Code 128 (Default) Disable Code 128 38 Advanced 2D Image Scanner
Code 39 Enable Code 39 (Default) Disable Code 39 39 Advanced Handheld High Speed Laser Scanner
PROGRAMMING GUIDE Code 93 Enable Code 93 (Default) Disable Code 93 40 Advanced 2D Image Scanner
Code 32 Enable Code 32 Disable Code 32 (Default) 41 Advanced Handheld High Speed Laser Scanner
PROGRAMMING GUIDE Code 11 Enable Code 11 Disable Code 11 (Default) 42 Advanced 2D Image Scanner
Codabar Enable Codabar (Default) Disable Codabar 43 Advanced Handheld High Speed Laser Scanner
PROGRAMMING GUIDE Plessey Enable Plessey Disable Plessey (Default) 44 Advanced 2D Image Scanner
MSI/Plessy Enable MSI/Plessy Disable MSI/Plessy (Default) 45 Advanced Handheld High Speed Laser Scanner
PROGRAMMING GUIDE Interleaved 2 of 5 Enable Interleaved 2 of 5 (Default) Disable Interleaved 2 of 5 46 Advanced 2D Image Scanner
IATA 2 of 5 Enable IATA 2 of 5 Disable IATA 2 of 5 (Default) 47 Advanced Handheld High Speed Laser Scanner
PROGRAMMING GUIDE Matrix 2 of 5 Enable Matrix 2 of 5 Disable Matrix 2 of 5 (Default) 48 Advanced 2D Image Scanner
Straight 2 of 5 Enable Straight 2 of 5 Disable Straight 2 of 5 (Default) 49 Advanced Handheld High Speed Laser Scanner
PROGRAMMING GUIDE RSS 14 Enable RSS 14 (Default) Disable RSS 14 50 Advanced 2D Image Scanner
RSS Expanded Enable RSS Expanded (Default) Disable RSS Expanded 51 Advanced Handheld High Speed Laser Scanner
PROGRAMMING GUIDE RSS Limited Enable RSS Limited (Default) Disable RSS Limited 52 Advanced 2D Image Scanner
GS1 128 AIM ID Enable Disable (Default) 53 Advanced Handheld High Speed Laser Scanner
PROGRAMMING GUIDE GS1 2D AIM ID Enable Disable (Default) 54 Advanced 2D Image Scanner
Component CC A Enable Component CC A Disable Component CC A (Default) 55 Advanced Handheld High Speed Laser Scanner
PROGRAMMING GUIDE Component CC B Enable Component CC B Disable Component CC B (Default) 56 Advanced 2D Image Scanner
Component CC C Enable Component CC C Disable Component CC C (Default) 57 Advanced Handheld High Speed Laser Scanner
PROGRAMMING GUIDE PDF417 Enable PDF417 (Default) Disable PDF417 58 Advanced 2D Image Scanner
Micro PDF417 Enable Micro PDF417 (Default) Disable Micro PDF417 59 Advanced Handheld High Speed Laser Scanner
PROGRAMMING GUIDE Data Matrix Enable Data Matrix (Default) Disable Data Matrix 60 Advanced 2D Image Scanner
QR Code Enable QG Code (Default) Disable QR Code 61 Advanced Handheld High Speed Laser Scanner
PROGRAMMING GUIDE Micro QR Code Enable Micro QG Code (Default) Disable Micro QR Code 62 Advanced 2D Image Scanner
Aztec Enable Aztec Disable Aztec (Default) 63 Advanced Handheld High Speed Laser Scanner
PROGRAMMING GUIDE MaxiCode Enable MaxiCode Disable MaxiCode (Default) 64 Advanced 2D Image Scanner
Symbology Features This section provides the programming barcodes for selecting features available to different symbologies. UPC / EAN Enable decoding of 2/5 digit supplemental code for UPC A, UPC E, EAN 13, and EAN 8 Disable decoding of 2/5 digit supplemental code for UPC A, UPC E, EAN 13, and EAN 8 (Default) 65 Advanced Handheld High Speed Laser Scanner
PROGRAMMING GUIDE UPC A Enable UPC A Number System digit (Default) Disable UPC A Number System digit Enable UPC A check digit (Default) Disable UPC A check digit 66 Advanced 2D Image Scanner
Enable conversion of UPC A to EAN13 Disable conversion of UPC A to EAN13 (Default) 67 Advanced Handheld High Speed Laser Scanner
PROGRAMMING GUIDE UPC E Enable UPC E Number System digit (Default) Disable UPC E Number System digit Enable UPC E check digit (Default) Disable UPC E check digit 68 Advanced 2D Image Scanner
Enable conversion of UPC E to UPC A Disable conversion of UPC E to UPC A (Default) 69 Advanced Handheld High Speed Laser Scanner
PROGRAMMING GUIDE EAN 8 Enable EAN 8 check digit (Default) Disable EAN 8 check digit Enable conversion of EAN 8 to EAN 13 Disable conversion of EAN 8 to EAN 13 (Default) 70 Advanced 2D Image Scanner
EAN 13 Enable EAN 13 check digit (Default) Disable EAN 13 check digit Enable conversion of EAN 13 to ISBN Disable conversion of EAN 13 to ISBN (Default) 71 Advanced Handheld High Speed Laser Scanner
PROGRAMMING GUIDE Enable conversion of EAN 13 to ISSN Disable conversion of EAN 13 to ISSN (Default) 72 Advanced 2D Image Scanner
EAN 13 Data Redundant Check Off 1 (Default) 2 3 73 Advanced Handheld High Speed Laser Scanner
PROGRAMMING GUIDE JAN code for Books Separator [TAB] key x 2 [SPACE] key x 3 [ ] dash char 74 Advanced 2D Image Scanner
Others char Separator For parameters requiring specific numeric values, scan the [PROGRAMMING GUIDE\ASCII Code] appropriately numbered barcode(s) None(Default) 75 Advanced Handheld High Speed Laser Scanner
PROGRAMMING GUIDE Code 39 Enable Code 39 full ASCII mode Disable Code 39 full ASCII mode (Default) Enable Start and Stop characters Disable Start and Stop characters (Default) 76 Advanced 2D Image Scanner
Disable Checksum (Default) Enable checksum and send check character Enable checksum and strip check character 77 Advanced Handheld High Speed Laser Scanner
PROGRAMMING GUIDE Code 39 Redundant Check Off 1 (Default) 2 3 78 Advanced 2D Image Scanner
Codabar Disable Checksum (Default) Enable checksum and send check character Enable checksum and strip check character 79 Advanced Handheld High Speed Laser Scanner
PROGRAMMING GUIDE Enable stripping Start and Stop characters Disable stripping Start and Stop characters (Default) 80 Advanced 2D Image Scanner
Codabar Redundant Check Off 1 (Default) 2 3 81 Advanced Handheld High Speed Laser Scanner
PROGRAMMING GUIDE Interleaved 2 of 5 Disable Checksum (Default) Enable checksum and send check character Enable checksum and strip check character 82 Advanced 2D Image Scanner
Default quiet zone checking No length checking performed (Default) Smaller quiet zone allowed 83 Advanced Handheld High Speed Laser Scanner
PROGRAMMING GUIDE MSI / Plessey Disable MSI Plessey checksum Mod 10 checksum (Default) Mod 10/10 checksum Mod 11/10 checksum 84 Advanced 2D Image Scanner
Output checksum character(s) (Default) Strip checksum character(s) 85 Advanced Handheld High Speed Laser Scanner
PROGRAMMING GUIDE Code 11 Output checksum character(s) Strip checksum character(s) (Default) Disable checksum checking 86 Advanced 2D Image Scanner
Enable 1 digit checksum checking Enable 2 digit checksum checking (Default) 87 Advanced Handheld High Speed Laser Scanner
PROGRAMMING GUIDE Data Matrix Enable mirror decoding (Default) Disable mirror decoding 88 Advanced 2D Image Scanner
Enable rectangular Data Matrix decoding Disable rectangular Data Matrix decoding (Default) 89 Advanced Handheld High Speed Laser Scanner
PROGRAMMING GUIDE QR / Micro QR Enable mirror decoding (Default) Disable mirror decoding 90 Advanced 2D Image Scanner
UTF8 conversion for word only Universal UTF8 conversion (Default) Note: Please install QR_UTF8_Conversion executable file before using this function. 91 Advanced Handheld High Speed Laser Scanner
PROGRAMMING GUIDE Japanese Language Encoding Support Enable Disable (Default) 92 Advanced 2D Image Scanner
Aztec Enable mirror decoding (Default) Disable mirror decoding 93 Advanced Handheld High Speed Laser Scanner
PROGRAMMING GUIDE Data Editing (Prefix) Prefix is additional characters that can be sent before the scanned data. Please scan the barcodes in the selection below to set your prefix. Prefix Up Flow 1. Scan. 2. Enable barcode type. 3. Scan prefix you would like to add characters within ASCII Table. Up to 4 digits can be added. 4. Scan. Ex. If we wish to add 3 as prefix for all barcode type, then follow procedure as below, Scan [] to enter setup. Then we select barcode by scanning [Enable All], then we scan [3] as 3 of ASCII HEX. At the end, we scan [] to completed setup. 94 Advanced 2D Image Scanner
All Prefix Enable All Disable All (Default) 95 Advanced Handheld High Speed Laser Scanner
PROGRAMMING GUIDE UPC / EAN Prefix Enable UPC A Disable UPC A Enable UPC E Disable UPC E 96 Advanced 2D Image Scanner
Enable EAN 8 Disable EAN 8 Enable EAN 13 Disable EAN 13 97 Advanced Handheld High Speed Laser Scanner
PROGRAMMING GUIDE Code 128 Prefix Enable Code 128 Disable Code 128 98 Advanced 2D Image Scanner
Code 39 Prefix Enable Code 39 Disable Code 39 99 Advanced Handheld High Speed Laser Scanner
PROGRAMMING GUIDE Code 93 Prefix Enable Code 93 Disable Code 93 100 Advanced 2D Image Scanner
Code 32 Prefix Enable Code 32 Disable Code 32 101 Advanced Handheld High Speed Laser Scanner
PROGRAMMING GUIDE Code 11 Prefix Enable Code 11 Disable Code 11 102 Advanced 2D Image Scanner
Codabar Prefix Enable Codabar Disable Codabar 103 Advanced Handheld High Speed Laser Scanner
PROGRAMMING GUIDE Plessey Prefix Enable Plessey Disable Plessey 104 Advanced 2D Image Scanner
MSI Prefix Enable MSI Disable MSI 105 Advanced Handheld High Speed Laser Scanner
PROGRAMMING GUIDE Interleaved 2 of 5Prefix Enable Interleaved 2 of 5 Disable Interleaved 2 of 5 106 Advanced 2D Image Scanner
IATA 2 of 5 Prefix Enable IATA 2 of 5 Disable IATA 2 of 5 107 Advanced Handheld High Speed Laser Scanner
PROGRAMMING GUIDE Matrix 2 of 5 Prefix Enable Matrix 2 of 5 Disable Matrix 2 of 5 108 Advanced 2D Image Scanner
Straight 2 of 5 Prefix Enable Straight 2 of 5 Disable Straight 2 of 5 109 Advanced Handheld High Speed Laser Scanner
PROGRAMMING GUIDE RSS 14 Prefix Enable RSS 14 Disable RSS 14 110 Advanced 2D Image Scanner
RSS Expanded Prefix Enable RSS Expanded Disable RSS Expanded 111 Advanced Handheld High Speed Laser Scanner
PROGRAMMING GUIDE RSS Limited Prefix Enable RSS Limited Disable RSS Limited 112 Advanced 2D Image Scanner
Component CC A Prefix Enable Component CC A Disable Component CC A 113 Advanced Handheld High Speed Laser Scanner
PROGRAMMING GUIDE Component CC B Prefix Enable Component CC B Disable Component CC B 114 Advanced 2D Image Scanner
Component CC C Prefix Enable Component CC C Disable Component CC C 115 Advanced Handheld High Speed Laser Scanner
PROGRAMMING GUIDE PDF 417 Prefix Enable PDF 417 Disable PDF 417 116 Advanced 2D Image Scanner
Micro PDF 417 Prefix Enable Micro PDF 417 Disable Micro PDF 417 117 Advanced Handheld High Speed Laser Scanner
PROGRAMMING GUIDE Data Matrix Prefix Enable Data Matrix Disable Data Matrix 118 Advanced 2D Image Scanner
QR Prefix Enable QR Code Disable QR Code 119 Advanced Handheld High Speed Laser Scanner
PROGRAMMING GUIDE Micro QR Prefix Enable Micro QR Disable Micro QR 120 Advanced 2D Image Scanner
Aztec Prefix Enable Aztec Disable Aztec 121 Advanced Handheld High Speed Laser Scanner
PROGRAMMING GUIDE MaxiCode Prefix Enable MaxiCode Disable MaxiCode 122 Advanced 2D Image Scanner
Data Editing (Suffix) Suffix is additional characters that can be sent after the scanned data. Please scan the barcodes in the selection below to set your suffix. Suffix Up Flow 1. Scan. 2. Enable barcode type. 3. Scan suffix you would like to add characters within ASCII Table. Up to 4 digits can be added. 4. Scan. Ex. If we wish to add 36 as suffix for all barcode type, then follow procedure as below. Scan [] to enter setup. Then we select barcode by scanning [Enable All], then we scan [3] as 3 of ASCII HEX and [6] as 6. 123 Advanced Handheld High Speed Laser Scanner
PROGRAMMING GUIDE All Suffix Enable All Disable All (Default) 124 Advanced 2D Image Scanner
UPC A Suffix Enable UPC A Disable UPC A 125 Advanced Handheld High Speed Laser Scanner
PROGRAMMING GUIDE UPC E Suffix Enable UPC E Disable UPC E 126 Advanced 2D Image Scanner
EAN 8 Suffix Enable EAN 8 Disable EAN 8 127 Advanced Handheld High Speed Laser Scanner
PROGRAMMING GUIDE EAN 13 Suffix Enable EAN 13 Disable EAN 13 128 Advanced 2D Image Scanner
Code 128 Suffix Enable Code 128 Disable Code 128 129 Advanced Handheld High Speed Laser Scanner
PROGRAMMING GUIDE Code 39 Suffix Enable Code 39 Disable Code 39 130 Advanced 2D Image Scanner
Code 93 Suffix Enable Code 93 Disable Code 93 131 Advanced Handheld High Speed Laser Scanner
PROGRAMMING GUIDE Code 32 Suffix Enable Code 32 Disable Code 32 132 Advanced 2D Image Scanner
Code 11 Suffix Enable Code 11 Disable Code 11 133 Advanced Handheld High Speed Laser Scanner
PROGRAMMING GUIDE Codabar Suffix Enable Codabar Disable Codabar 134 Advanced 2D Image Scanner
Plessey Suffix Enable Plessey Disable Plessey 135 Advanced Handheld High Speed Laser Scanner
PROGRAMMING GUIDE MSI Suffix Enable MSI Disable MSI 136 Advanced 2D Image Scanner
Interleaved 2 of 5 Suffix Enable Interleaved 2 of 5 Disable Interleaved 2 of 5 137 Advanced Handheld High Speed Laser Scanner
PROGRAMMING GUIDE IATA 2 of 5 Suffix Enable IATA 2 of 5 Disable IATA 2 of 5 138 Advanced 2D Image Scanner
Matrix 2 of 5 Suffix Enable Matrix 2 of 5 Disable Matrix 2 of 5 139 Advanced Handheld High Speed Laser Scanner
PROGRAMMING GUIDE Straight 2 of 5 Suffix Enable Straight 2 of 5 Disable Straight 2 of 5 140 Advanced 2D Image Scanner
RSS 14 Suffix Enable RSS 14 Disable RSS 14 141 Advanced Handheld High Speed Laser Scanner
PROGRAMMING GUIDE RSS Expanded Suffix Enable RSS Expanded Disable RSS Expanded 142 Advanced 2D Image Scanner
RSS Limited Suffix Enable RSS Limited Disable RSS Limited 143 Advanced Handheld High Speed Laser Scanner
PROGRAMMING GUIDE Component CC A Suffix Enable Component CC A Disable Component CC A 144 Advanced 2D Image Scanner
Component CC B Suffix Enable Component CC B Disable Component CC B 145 Advanced Handheld High Speed Laser Scanner
PROGRAMMING GUIDE Component CC C Suffix Enable Component CC C Disable Component CC C 146 Advanced 2D Image Scanner
PDF 417 Suffix Enable PDF417 Disable PDF417 147 Advanced Handheld High Speed Laser Scanner
PROGRAMMING GUIDE Micro PDF 417 Suffix Enable Micro PDF417 Disable Micro PDF417 148 Advanced 2D Image Scanner
Data Matrix Suffix Data Matrix Enable Data Matrix Disable 149 Advanced Handheld High Speed Laser Scanner
PROGRAMMING GUIDE QR Code Suffix QR Code Enable QR Code Disable 150 Advanced 2D Image Scanner
Micro QR Suffix Micro QR Enable Micro QR Disable 151 Advanced Handheld High Speed Laser Scanner
PROGRAMMING GUIDE Aztec Suffix Aztec Enable Aztec Disable 152 Advanced 2D Image Scanner
MaxiCode Suffix MaxiCode Enable MaxiCode Disable 153 Advanced Handheld High Speed Laser Scanner
PROGRAMMING GUIDE Code tings Lengths for Codes One Discrete Length Select this option to decode the symbol containing a selected length. Select the length using the numeric bar codes in ASCII Code Table. Example 1: To decode Interleaved 2 of 5 symbols with 8 characters: a. scan to set up b. scan Interleaved 2 of 5 One Discrete Length c. scan 8 in ASCII Code Table d. scan to confirm the setup Example 2: To decode Interleaved 2 of 5 symbols with 12 characters: a. scan to set up b. scan Interleaved 2 of 5 One Discrete Length c. scan scan 1 followed by 2 in ASCII Code Table d. scan to confirm the setup Two Discrete Lengths Select this option to decode the symbol containing either of two selected lengths. Select lengths using the numeric bar codes in ASCII Code Table. Example: To decode Code 128 symbols containing either 8 or 14 characters a. scan to set up b. scan Code 128 Two Discrete Length c. scan 0, 8, 1, and then 4 in ASCII Code Table d. scan to confirm the setup 154 Advanced 2D Image Scanner
Length Within Range Select this option to decode the symbol with a specific length range. Select lengths using numeric bar codes in ASCII Code Table. Example: To decode Codabar symbols containing between 7 and 8 characters, a. scan to set up b. scan Codabar Length Within Range c. scan 0, 7, 0, and then 8 in ASCII Code Table d. scan to confirm the setup Any Length Select this option to decode the symbol containing any number of characters within the digital scanner s capability. Example: a. scan to set up b. scan Matrix 2 of 5 Any Length c. scan to confirm the setup 155 Advanced Handheld High Speed Laser Scanner
PROGRAMMING GUIDE Lengths for Code 128 One Discrete Length Two Discrete Lengths Length Within Range Any Length (Default) 156 Advanced 2D Image Scanner
Lengths for Code 39 One Discrete Length Two Discrete Lengths Length Within Range Any Length (Default) 157 Advanced Handheld High Speed Laser Scanner
PROGRAMMING GUIDE Lengths for Code 93 One Discrete Length Two Discrete Lengths Length Within Range Any Length (Default) 158 Advanced 2D Image Scanner
Lengths for Codabar One Discrete Length Two Discrete Lengths Length Within Range Any Length (Default) 159 Advanced Handheld High Speed Laser Scanner
PROGRAMMING GUIDE Lengths for Interleaved 2 of 5 One Discrete Length Two Discrete Lengths Length Within Range Any Length (Default) 160 Advanced 2D Image Scanner
Lengths for Code 11 One Discrete Length Two Discrete Lengths Length Within Range Any Length (Default) 161 Advanced Handheld High Speed Laser Scanner
PROGRAMMING GUIDE Lengths for MSI One Discrete Length Two Discrete Lengths Length Within Range Any Length (Default) 162 Advanced 2D Image Scanner
Lengths for Matrix 2 of 5 One Discrete Length Two Discrete Lengths Length Within Range Any Length (Default) 163 Advanced Handheld High Speed Laser Scanner
PROGRAMMING GUIDE Code Identifiers Scan the following barcodes to set symbology Identifiers. Disable Code ID (Default) Enable factory standard ID Enable AIM ID 164 Advanced 2D Image Scanner
Code Identifiers Table Symbology Factory Standard AIM UPC A A E UPC E E E EAN 8 FF E EAN 13 F E Code 128 K C Code 39 M A Code 93 L G Code 32 M X Code 11 O H Codabar N F Plessey P P MSI / Plessey a M Interleaved 2 of 5 I I IATA 2 of 5 Z R Matrix 2 of 5 G X Straight 2 of 5 S S Pharmacode H X RSS 14 RS e RSS Expanded RX e RSS Limited RL e Component CC A m e Component CC B n e Component CC C i e PDF417 r L Micro PDF417 s L Data Matrix t d QR u Q Micro QR j Q Aztec e Z MaxiCode v U 165 Advanced Handheld High Speed Laser Scanner
PROGRAMMING GUIDE Keyboard Caps Lock State Scan a barcode below to turn Caps on or off. Caps Lock Off (Default) Caps Lock On 166 Advanced 2D Image Scanner
Function Key Mapping Scan the following barcodes to enable or disable Function Key Mapping. Disable Function Key Mapping (Default) Enable Function Key Mapping 167 Advanced Handheld High Speed Laser Scanner
PROGRAMMING GUIDE ASCII Code For parameters requiring specific numeric values, scan the appropriately numbered barcode(s). Space! " # $ % 168 Advanced 2D Image Scanner
& ' ( ) * + 169 Advanced Handheld High Speed Laser Scanner
PROGRAMMING GUIDE,. / : ; 170 Advanced 2D Image Scanner
< = >? @ 171 Advanced Handheld High Speed Laser Scanner
PROGRAMMING GUIDE 0 1 2 3 4 5 172 Advanced 2D Image Scanner
6 7 8 9 A (Function Key Mapping: Ctrl+a) B (Function Key Mapping: Ctrl+b) 173 Advanced Handheld High Speed Laser Scanner
PROGRAMMING GUIDE C (Function Key Mapping: Ctrl+c) D (Function Key Mapping: Ctrl+d) E (Function Key Mapping: Ctrl+e) F (Function Key Mapping: Ctrl+f) G (Function Key Mapping: Ctrl+g) 174 Advanced 2D Image Scanner
H (Function Key Mapping: Ctrl+h) I (Function Key Mapping: Ctrl+i) J (Function Key Mapping: Ctrl+j) K (Function Key Mapping: Ctrl+k) L (Function Key Mapping: Ctrl+l) 175 Advanced Handheld High Speed Laser Scanner
PROGRAMMING GUIDE M (Function Key Mapping: Ctrl+m) N (Function Key Mapping: Ctrl+n) O (Function Key Mapping: Ctrl+o) P (Function Key Mapping: Ctrl+p) Q (Function Key Mapping: Ctrl+q) 176 Advanced 2D Image Scanner
R (Function Key Mapping: Ctrl+r) S (Function Key Mapping: Ctrl+s) T (Function Key Mapping: Ctrl+t) U (Function Key Mapping: Ctrl+u) V (Function Key Mapping: Ctrl+v) 177 Advanced Handheld High Speed Laser Scanner
PROGRAMMING GUIDE W (Function Key Mapping: Ctrl+w) X (Function Key Mapping: Ctrl+x) Y (Function Key Mapping: Ctrl+y) Z (Function Key Mapping: Ctrl+z) 178 Advanced 2D Image Scanner
a b c d e f 179 Advanced Handheld High Speed Laser Scanner
PROGRAMMING GUIDE g h i j k l 180 Advanced 2D Image Scanner
m n o p q r 181 Advanced Handheld High Speed Laser Scanner
PROGRAMMING GUIDE s t u v w x 182 Advanced 2D Image Scanner
y z 183 Advanced Handheld High Speed Laser Scanner
PROGRAMMING GUIDE Insert Delete Home Up arrow Down arrow 184 Advanced 2D Image Scanner
Left arrow Right arrow Tab Backspace Shift ESC 185 Advanced Handheld High Speed Laser Scanner
PROGRAMMING GUIDE Page up Page down F1 F2 F3 F4 186 Advanced 2D Image Scanner
F5 F6 F7 F8 F9 F10 187 Advanced Handheld High Speed Laser Scanner
PROGRAMMING GUIDE F11 F12 188 Advanced 2D Image Scanner
JavaPOS Driver V2.00 for Win32/Win64 JavaPOS Version Our JavaPOS driver now is compatible with JavaPOS1.7. Install the Java2 Runtime Environment The JRE is Java s virtual machine that allows for applications to run on the host computer. To be able to run the JavaPOS application, you need a 1.7 version JRE. Ignore the following steps if you already have a JavaPOS1.7 or a later version in your host computer. Go to http://java.sun.com, and select this version of Java Runtime Environment. Install the program following the instructions. Install the Service Object and JavaPOS files In the \Driver folder, there are two files: ZbtJavapos.jar and jpos.xml. Please include ZbtJavapos.jar at your CLASSPATH and also copy the related JPosEntry option from the jpos.xml to your application s jpos.xml. How to use RS232 scanner with JavaPOS Driver Install the Java RXTXcomm API In the \RXTXcomm folder, there are four files: rxtxserial.dll, rxtxparallel.dll, and RXTXcomm.jar. Please do the following steps to install the library. 1. Copy rxtxserial.dll and rxtxparallel.dll to C:\Windows\system32. 2. Copy RXTXcomm.jar to your <JRE Install Folder>\lib directory. Disable (Default) Enable 189 Advanced Handheld High Speed Laser Scanner
PROGRAMMING GUIDE Use barcodes to configure the Handheld scanner JavaPOS configuration barcodes: Start of Configuration RS 232 JPOS Enable of Configuration 190 Advanced 2D Image Scanner
Running the JavaPOS Test utility Please run the test application POStest.sh to evaluate your installation.. How to use JavaPOS driver at your application 1. Add ZbtJavaPos.jar from the \Driver folder to the CLASSPATH and copy the related JPosEntry option from the jpos.xml. 2. Modify the jpos.xml based on your COM Port 3. Example of jpos.xml file content <?xml version="1.0" encoding="utf 8"?> <!DOCTYPE JposEntries PUBLIC " //JavaPOS//DTD//EN" "jpos/res/jcl.dtd"> <JposEntries> <! Saved by JavaPOS jpos.config/loader (JCL) version 2.2.0 on 2010/3/11 10:16 > <JposEntry logicalname="z3172p"> <creation factoryclass="com.zbt.jpos.zbtjposserviceinstancefactory" serviceclass="com.zbt.jpos.scannerservice"/> <vendor name="" url=""/> <jpos category="scanner" version="1.7"/> <product description="scanners" name="scanner" url=""/> <! Other non JavaPOS required property (mostly vendor properties and bus specific properties i.e. RS232 ) > <prop name="devicetype" type="string" value="2d"/> <prop name="devicebus" type="string" value="rs232"/> <prop name="baudrate" type="string" value="115200"/> <prop name="parity" type="string" value="none"/> <prop name="portname" type="string" value=" COM1"/> <prop name="flowcontrol" type="string" value="none"/> <prop name="stopbits" type="string" value="1"/> <prop name="databits" type="string" value="8"/> </JposEntry> <?xml version="1.0" encoding="utf 8"?> <!DOCTYPE JposEntries PUBLIC " //JavaPOS//DTD//EN" "jpos/res/jcl.dtd"> <JposEntries> </JposEntries> Note: The default baud rate : 2D scanner =115200 191 Advanced Handheld High Speed Laser Scanner
PROGRAMMING GUIDE How to use USB scanner with JavaPOS Driver Configuring the Scanner via barcodes: Scan the barcodes in the sequence below to configure the scanner to usb serial mode. JavaPOS configuration bar codes: Start of Configuration USB Virtual COM Port JPOS Enable of Configuration 192 Advanced 2D Image Scanner
Install the Java RXTXcomm API In the \RXTXcomm folder, there are four files: rxtxserial.dll, rxtxparallel.dll, and RXTXcomm.jar. Please do the following steps to install the library. 1. Copy rxtxserial.dll and rxtxparallel.dll to C:\Windows\system32 2. Copy RXTXcomm.jar to your <JRE Install Folder>\lib directory. Running the JavaPOS Test utility Please run the test application to evaluate your installation. 193 Advanced Handheld High Speed Laser Scanner
PROGRAMMING GUIDE How to Use JavaPOS Driver at your application 1. In the \Driver folder, copy ZbtJavaPos.jar and jpos.xml to your work folder. 2. Modify the jpos.xml. 3. Example of jpos.xml file content <?xml version="1.0" encoding="utf 8"?> <!DOCTYPE JposEntries PUBLIC " //JavaPOS//DTD//EN" "jpos/res/jcl.dtd"> <JposEntries> <! Saved by JavaPOS jpos.config/loader (JCL) version 2.2.0 on 2010/3/11 10:16 > <JposEntry logicalname="z3172p"> <creation factoryclass="com.zbt.jpos.zbtjposserviceinstancefactory" serviceclass="com.zbt.jpos.scannerservice"/> <vendor name="" url=""/> <jpos category="scanner" version="1.7"/> <product description="scanners" name="scanner" url=""/> <! Other non JavaPOS required property (mostly vendor properties and bus specific properties i.e. RS232 ) > <prop name="devicetype" type="string" value="2d"/> <prop name="devicebus" type="string" value="rs232"/> <prop name="baudrate" type="string" value="115200"/> <prop name="parity" type="string" value="none"/> <prop name="portname" type="string" value=" COM56"/> <prop name="flowcontrol" type="string" value="none"/> <prop name="stopbits" type="string" value="1"/> <prop name="databits" type="string" value="8"/> </JposEntry> <?xml version="1.0" encoding="utf 8"?> <!DOCTYPE JposEntries PUBLIC " //JavaPOS//DTD//EN" "jpos/res/jcl.dtd"> <JposEntries> </JposEntries> 194 Advanced 2D Image Scanner