The future of installation testing is here The Fluke 50 Series Multifunction Testers
Fluke 50 Series Safer, easier installation testing. The 50 Series testers verify the safety of electrical installations in domestic, commercial and industrial applications. They can ensure that fixed wiring is safe and correctly installed to meet the requirements of IEC 0, HD 8 and all relevant local standards. The unique ergonomic design, low weight, and padded neck-strap to free your hands, make operating a Fluke 50 multifunction tester a pleasure. With easy-to-operate controls and a large display with exceptionally wide viewing angle, it s also comfortable and safe to use. Select from three models 5 5: Performs all basic installation tests including continuity/insulation/loop impedance and RCD tripping time 5: Also provides RCD tripping current level and RCD auto-testing 5: As 5 but with earth resistance and phase sequence measurement. Has internal memory and a PC interface for documentation and reporting (see back page for a comparison chart) 5 5 Phase/Earth Voltage warning indicator On/off button Press to test button 8 Function buttons to assist easy navigation 5 5 Memory mode button 7 Scroll memory locations button Backlight button 8 Test lead resistance zero button 7
Learn in minutes, test in seconds. Save time on every installation. Easy: simply turn the knob, press the button and see the results Efficient: measure loop impedance without tripping RCDs, eliminating the need to bypass them Rugged: withstands a one-meter drop for demanding field use. Safe: slim probe with test button keeps your eyes on the panel while probing hard to reach points Comfortable: compact and lightweight (less than. kg) for all day testing Compliant: meets all relevant standards including EN 557 and VDE 0 The unique curved shape, ergonomic control layout and padded neck-strap ensure comfort in use. Performs all electrical installation tests including Voltage and frequency Insulation resistance Continuity 5 5 Loop impedance RCD tripping time RCD tripping current (models 5, 5) 8 7 7 Earth resistance (model 5) 8 Phase sequence (model 5)
Z I R LO Continuity (R LO ) Test continuity of live and protective conductors Time-saving 'auto-null' feature subtracts lead resistance from measurements (and stores it in memory even after power-down) Wiring connection check indication and live circuit detection for added safety High-resolution measurements down to 0.0 Ω RCD Carry out functional trip testing and current tripping level tests Test wide range of RCDs (all models) Test DC-sensitive and delayedresponse RCDs (5 and 5) Automated test sequence function for rapid RCD testing (5 and 5) RCD Tripping Current Test (ramp test) (5 and 5) Wiring connection check indication for added safety Phase selector switch I N Voltage and frequency (V) Dual display gives simultaneous readout of mains voltage and frequency R ISO Insulation resistance (R ISO ) Test the insulation resistance of live and protective conductors Insulation test voltages of 50, 00, 50, 500 and 000 V cover all applications including telecom (depending on model) Clear indication of applied voltage Auto discharge allows fast and safe discharge of electrical energy in capacitive circuits Added safety through live circuit detection, to check and inhibit test if circuit under test is live Loop impedance (Z I ) Measure earth-loop or line impedance Advanced and patented loop measurement technology prevents RCD tripping and guarantees consistent readings after multiple tests 0.0 Ω resolution on loop measurements Auto-null to remove test-lead resistance from measurement Prospective short-circuit/ fault current (PSC/PFC) Measure the potential fault current between phase/neutral and earth/neutral conductors Simultaneous read-out with loop impedance A resolution on measurements Earth resistance (R E ) (5 only) Measure resistance to earth of electrodes, stakes and earthing mats Test with auxiliary earth spikes in the ground Three-wire tests for accurate measurement User selectable safety voltage level of 50 or 5 V Phase sequence (5 only) Test phase sequence rapidly on three phase systems -
Panel graphics Rotary knob labeling is available in six versions. Select from English, French, German, Italian, Spanish or a user-friendly Symbols version. Professional reports Up to 500 test results can be stored in the 5 installation tester. The data stored for each measurement consists of the test function, user selectable test conditions and unique references. Slim probe design Thanks to its slim probe with integral test button, you can safely make one-handed measurements on hard to reach points, while keeping your eyes on the panel. Model 5 has an IR port and adaptor to enable the results to be uploaded to a computer for preparing professional reports using (optional) FlukeView Forms software. Reports can easily be customized to suit individual requirements. Standard formats are also available.
More functions in one tool AC Voltage Measurement Range Resolution Accuracy Input Overload 50 Hz - 0 Hz Impedance Protection 500 V 0, V 0,8% +, MΩ 0 Vrms Continuity Testing Range Resolution Test Current Open Circuit Accuracy (autoranging) Voltage 0 Ω 0,0 Ω 00 Ω 0, Ω > 00 ma > V ± (,5%+ dgt.) 000 Ω Ω Insulation Resistance Measurement Model Test Voltages Accuracy of Test Voltage (at rated test current) 5 500 000 V +0%, -0% 5 50-500 - 000 V +0%, -0% 5 50 00-50 - +0%, -0% 500-000 V Test Voltage Insulation Resolution Test Current Accuracy Resistance Range 50 V 0 kω to 50 MΩ 0,0 MΩ ma ± (%+ dgt.) @ 50 kω 00 V 00 kω to 0 MΩ 0,0 MΩ ma ± (%+ dgt.) 0 MΩ to 00 MΩ 0, MΩ @ 00 kω ± (%+ dgt.) 50 V 00 kω to 00 MΩ 0, MΩ ma ± (,5%+ dgt.) @ 50 kω 500 V 00 kω to 00 MΩ 0, MΩ ma ± (,5%+ dgt.) 00 MΩ to 500 MΩ MΩ @ 500 kω + 0% 000 V 00 kω to 00 MΩ 0, MΩ ma ± (,5%+ dgt.) 00 MΩ to 000 MΩ MΩ @ MΩ + 0% Auto Discharge Live Circuit Detection Maximum Capacitive Load Discharge time constant, 0.5 second for C = µf or less. Inhibits test if terminal voltage > 0 V prior to initiation of test. Operable with the 5 µf load Loop Impedance Measurement Measuring Range 00 500 V AC (50/0 Hz) Input connection Loop Impedance: phase to earth (soft key selection) Line impedance: phase to neutral Limit on consecutive tests Automatic thermal shutdown after 50 consecutive tests at 0 second intervals (typical) Range Resolution Accuracy 0 Ω 0,0 Ω 00 Ω 0, Ω ± (%+0 digits) 000 Ω Ω PFC, PSC Test Computation PFC or PSC determined by dividing measured mains voltage by measured loop (L-PE) resistance or line (L-N) resistance Range 0 to 0 ka Resolution and Units Resolution Units lk < 000 A A lk < 000 A 0. ka Accuracy Determined by accuracy of loop resistance and mains voltage measurements.
RCD Testing RCD Type Model 5 Model 5 Model 5 AC G AC S A G A S AC Responds to AC G General, no delay S Time delay A Responds to pulsed signal Tripping Time Test ( T) Model 5 Current Settings Multiplier Current *RCD Type Maximum Accuracy Test Time 0, 0, 00, 00, 500, 000 ma x +0% -0% G 0 ms 0, 0, 00, 00, 500, 000 ma x +0% -0% S 50 ms *G General, no delay *S Time delay Tripping Time Test ( T) Models 5 and 5 Current Settings Multiplier Current Accuracy 0, 0, 00, 00, 500, 000 ma x / +0% - 0% of test current 0, 0, 00, 00, 500, 000 ma x +0% -0% 0, 0 ma x 5 ±0% Current Multiplier *RCD Type Measurement Range Trip Time Accuracy Europe UK x / G 0 ms 000 ms ±(% Reading + digit) x / S 50 ms 000 ms ±(% Reading + digit) x G 0 ms 0 ms ±(% Reading + digit) x S 50 ms 50 ms ±(% Reading + digit) x 5 G 50 ms 50 ms ±(% Reading + digit) x 5 S 0 ms 0 ms ±(% Reading + digit) *G General, no delay *S Time delay Tripping current (ramp) test (models 5 and 5) Current Range Step size Dwell time Trip Current Measurement Accuracy Type G Type S 50% to 0% of 0% of I N 00 ms/ 500 ms/ ± 5% RCD s rated current step step Earth Resistance Test (R E ) Model 5 Only Range Resolution Accuracy 00 Ω 0, Ω ±(% + 5 digits) 000 Ω Ω ±(,5% + 0 digits) Frequency Compliance Voltage 8 Hz + 5 V Phase Sequence Indication Model 5 Only Icon Display of Phase Sequence icon Phase Sequence indicator is active Displays -- in digital display field for correct sequence. Displays -- for incorrect phase. Dashes in place of a number indicate a valid determination could not be made. General Specifications Operating Range -0 C to 0 C Operating Humidity Noncondensing <0 C 95% 0 to 0 C; 75% 0 to 0 C Safety Rating EN 00-, CAT III 500 V Battery size, quantity Type AA, Battery type Alkaline supplied, usable with.v NiCD or NiMH rechargeable batteries Dimensions (L x W x H) 0 x 5 x.5 cm. Weight (with batteries).7 kg
Fluke 50 Series Measurement functions Voltage & Frequency Wiring polarity checker Insulation Resistance Continuity Loop & Line Resistance PFC/PSC (fault/short-circuit current) RCD tripping time RCD tripping current level Automatic RCD test sequence Test DC-sensitive RCD s Earth Resistance Phase Sequence Indicator Other features Self-test EN 557*/VDE 0 compliant Illuminated Display Live voltage indicator Battery indicator and battery test function Memory, Interface Memory (500 measurements) Computer interface Time stamp (with FlukeView Forms) Software Fluke 5 Fluke 5 Fluke 5 500, 000 V 50, 500, 000 V 50, 00, 50, 500, 000 V ramp test ramp test Option * 5: sections,,,,,0 5: sections,,,,,0 5: sections,,,,5,,7,0 EN 557 COMPLIANT Fluke. Keeping your world up and running. Complete kit All 50 models are equipped with detachable leads that can be replaced in case of damage or loss. A durable hard carrying case will protect your instrument in tough field conditions. A probe with built-in test button comes with every instrument. Included accessories Hard carrying case Mains test cord Remote control probe and lead Other test leads Other test probes Large crocodile clips Quick reference guide User guide on CD-ROM AA Cell batteries Padded carrying strap Optional accessories FlukeView Forms software and cable Fused test leads Auxiliary earth spikes and test leads 5 5 5 Year Warranty Fluke Corporation P.O. Box 9090 Everett, WA USA 980 Fluke Europe B.V. P.O. Box 8 50 BD Eindhoven The Netherlands For more information call: In the U.S.A. (800) -585 or Fax (5) -5 In Europe/M-East/Africa + (0)0 75 00 or Fax + (0)0 75 In Canada (905) 890-700 or Fax (905) 890-8 From other countries + (5) -5500 or Fax + (5) -5 Visit us on the world wide web at: http://www.fluke.com Copyright 00 Fluke Corporation. All rights reserved. Printed in the Netherlands 09/0. Data subject to alteration without notice. Pub_ID: 08-eng Rev. 0