HT COMBI419. Innovative meter designed to perform all safety test
|
|
- Angela McDowell
- 5 years ago
- Views:
Transcription
1 HT COMBI419 Innovative meter designed to perform all safety test
2 Description COMBI419 and COMBI420 is an innovative meter designed to perform all safety test verifies on electrical installations in compliance to recently standards (VDE0100, BS7671 and so on, measure and save results of [environmental parameters (illuminanance, temperature, sound level) 420], leakage currents and [active power, harmonics, power factor measurements on single phase systems 420]. The meter it's very easy to use and have a wide number of internal features which are selectable by using the multilanguage menu. The instrument permits, moreover, to start principal measures by using a special remote prove (PR400 optional accessory) particular useful to perform tests in very quickly mode and the AUTO internal function to perform sequential measurements of Global Earth Resistance, test on RCDs' and Insulation directly on sockets of civil installations. A contextual help menu selectable by user it's available for each measurement function and permits a valid information during connection of meter to the installation. The newest electronic function selector give to the meter a extreme rugged structure for perfect using "on field". A wide internal memory permits the saving of any measurements and the transfer to PC by serial port with dedicated software it's possible. Each measure can be saved with all the sub-results and test parameters with up to two ID locators (selectable by user on meter) in order to reach the exact point where the measure was performed. MAIN FEATURES OF FAMILY 400 METERS [contextual help active on each function] Help on line (available on each function) to support the user while connecting the instrument to the installation under measurement Each model permits the Start of measurements with remote probe (PR400 optional accessory) 1
3 General menu to quickly selection of available test performed by meter AUTOMATIC function to perform all safety tests through a single outlet High resolution (0.1mΩ) loop impedance measurements by IMP57 optional accessory (Speed418) High resolution (0.1mΩ) loop impedance P-P, P-N, P-PE optional accessory 2
4 MODELS AND FEATURES Measurements Continuity test on protective conductor with 200mA Insulation resistance VDC RCDs tripping time and current (general and selective, AC and A types) mA Contact voltage Ut Loop impedance P-N, P-P, P-PE Loop impedance P-N, P-P, P-PE with high resolution (0.1mΩ) with IMP57 optional accessory Prospective short circuit current Global earth resistance Ra without RCDs tripping Phase sequence Leakage current (with HT96U optional accessory) AUTOMATIC test (Ra, RCD time, Insulation) directly on outlet Using optional remote probe (PR400) for activation of tests Noise voltage measure Contextual help at display Memory and PC interface (Optical-USB) COMBI 419 MODELS AND ACCESSORIES Standard Accessories C2033X: cable 3 wires with Shuko plug UNIVERSALKIT: set of 3 cable + 3 alligator clips + 1 test lead BORSA75N: carrying bag Calibration Certificate ISO9000 Instruction manual on CD-ROM Quick reference guide COC4-UK: kit of 4 alligator clips BORSA2000: carrying bag COMBI419 Battery required: 6x 1.5V type LR6, AA, AM3, MN 1500 (Not included in accessories) 3
5 Optional Accessories UNIVERSALKIT: set of 3 cable + 3 alligator clips + 1 test lead HT96U: leakage current clamp A/1V? 54mm max diameter TOPVIEW2006: Windows software + optical/usb cable IMP57: accessory for loop impedance with high resolution PR400: remote probe for test activation COMBI419 STANDARDS -CE mark -EN Continuity test -EN Insulation Resistance -EN EN EN Loop impedance P-P, P-N, P-PE -EN Earth resistance -EN RCD test -EN EN EN EN EMC Standards -EN th edition 4
6 ELECTRICAL SPECIFICATIONS Accuracy is indicated as ± (% rdgs + no. of dgt) at 23 C ± 5 C, con relative humidity <60%RH (*) Technical specification can be modified without notice Continuity test on protective conductors Range(Ω) Resolution(Ω) Accuracy (*) 0.00 ~ (*) after cable calibration which eliminates the cable resistance Test current Open leads voltage ±(2.0% rdg + 2dgt) >200mA DC per R 5Ω (calibration included) current measurement resolution: 1mA 4 < Vo < 24V CAT III 240V to Ground CAT III 415V between inputs RCDs tripping time Range(ms) Resolution(ms) Accuracy ½ I N, I N 1 ~ I N 1 ~ 200 general 1 ~ 250 selective 5 I N RCD Nominal tripping current RCD type Phase-ground voltage Frequency Voltage contact limits 1 ~ 50 general 1 ~ 160 selective 1 ±(2.0% rdg + 2dgt) 10mA, 30mA, 100mA, 300mA, 500mA AC, A, general and selective 100V 265V 50Hz ± 0.5Hz, 60Hz ± 0.5Hz 25V or 50V CAT III 240V to Ground CAT III 415V between inputs RCDs tripping current (general, AC and A types) I N RCDs type Range I N (ma) Resolution (ma) Accuracy I N AC (0.5 ~ 1.4) I N I N 10mA A (0.5 ~ 2) I N 0.1 I N - 0%, +(5.0% I N ) AC (0.5 ~ 1.4) I N I N > 10mA A (0.5 ~ 2) I N 5
7 Insulation resistance (DC voltage) Test voltage(v) Range(MΩ) Resolution(MΩ) Accuracy ~ ~ ±(5% rdg+2 dgt) ~ ±(5% rdg+2 dgt) ~ ~ ±(5% rdg+2 dgt) ~ ~ ±(5% rdg+2 dgt) ~ ~ ±(5% rdg+2 dgt) Open leads voltage 1.1 x nominal test voltage voltage measurement resolution:1v Short circuit current 500V 50, 100, 250, 1000V Nominal current 230kΩ, 500V; 1MΩ, 1000V Protections the instrument returns an error message while detecting an input voltage >30V Contact voltage Ut Range(V) Resolution(V) Accuracy 0 ~ 2Ut lim 0.1-0%, +(2% rdg+2 dgt) Utlim (Ul) 25V, 50V Loop impedance P-P, P-N, P-PE Range (Ω) Resolution (Ω) (*) Accuracy 10.0 ~ ±(5% rdg+2dgt) (*) 0.1mΩ in mω range (with option accessory IMP57) Maximum peak current 127V; 230V; 400V Test voltage V (phase-neutral) / V (phase-phase); 50Hz ± 0.5Hz, 60Hz ± 0.5Hz 6
8 Global Earth Resistance R A without tripping the RCD Range (Ω) Resolution (Ω) (*) Accuracy 0.01 ~ ±(5.0%rdg + 1.0Ω) 0.1 ~ ~ ±(5.0%rdg + 10dgt) Test 265V <15 ma Test voltage V (phase-neutral); 50Hz ± 0.5Hz, 60Hz ± 0.5Hz Utlim (Ul) 25V, 50V Phase sequence with 1 or 2 wires Range (V) Results displayed 100 ~ correct phase sequence CAT III 240V to Ground 132 wrong phase sequence CAT III 415V between inputs 11- phase coincidence The instrument detects the phase sequence by touching the hot wire. The detection is not performed on insulated cables Frequency 50Hz ± 0.5Hz, 60Hz ± 0.5Hz Leakage current AC TRMS (amperometric input) Range(mV) Resolution (mv) Accuracy Frequency range 1 ~ ±(1.0%rdg + 2dgt) 50Hz ~ 60Hz CAT I 30V to Ground and between inputs GENERAL SPECIFICATIONS MECHANICAL FEATURES Dimensions Weight (batteries included) Protection degree 240 (L) x 160 (W) x 70 (D) mm about 1.2kg / (GEO416: about 1kg) IP50 MEMORY AND SERIAL INTERFACE Each measurement can be stored Memory >600 locations PC communication port optical / USB DISPLAY Features GEO416-Visible area graphic LCD with backlight 73x65 mm 7
9 GEO416-Low batteries indications Symbol at display POWER SUPPLY Batteries 6x 1.5V type LR6, AA, AM3, MN 1500 Battery life > 600 measurements (without using the timer) ENVIRONMENTAL CONDITIONS Reference temperature of calibration (23 C ± 5 C) Working temperature 0 C ~ 40 C Working humidity < 80%RH Storage temperature (batteries not included) -10 C ~ 60 C Storage humidity < 80%RH GENERAL REFERENCE STANDARDS EMC 89/336/EEC guideline amended with 93/68/EEC (IEC61326) LVD 73/23/CEE guideline (IEC61010) Product guideline IEC61557 Insulation class 2 (double insulation) Pollution degree 2 Overvoltage category of the voltage inputs (installation/measurement) CAT III 240V to ground, 415V between inputs Overvoltage category of the AUX input 5V to ground Max altitude 2000m GENERAL REFERENCE STANDARDS-(GEO416) Safety of measuring instruments IEC / EN Safety of accessories IEC / EN Product type standard IEC / EN , IEC / EN Insulation double insulation Pollution degree 2 Overvoltage category CAT III 240V to ground, 415V between inputs Max altitude 2000m EMC EN (1998) + A1(1999) This instrument complies with the requirements of the European Low Voltage Directives 72/23/CEE (LVD) and EMC 2004/108/CE BST Caltek Industrial Ltd Flat G, 2/F., Block 4, Golden Dragon Industrial Centre, Tai Lin Pai Road, Kwai Chung, N.T., Hong Kong sales@caltek.com.hk TEL: (852) FAX: (852)
HT FAMILY 400 METERS. Innovative meter designed to perform all safety test and power measurements on single phase system
HT FAMILY 400 METERS Innovative meter designed to perform all safety test and power measurements on single phase system Description COMBI419 and COMBI420 is an innovative meter designed to perform all
More informationHT FAMILY 400 METERS. Innovative meter designed to perform all safety test and power measurements on single phase system
HT FAMILY 400 METERS Innovative meter designed to perform all safety test and power measurements on single phase system Description ISO410 Insulation / Continuity meter with remote probe GEO416 Professional
More informationFamily 400 meters Rel /04/2007
COMBI49 COMBI420 ISO40 SPEED48 Pag - 6. MAIN FEATURES OF FAMILY 400 METERS Help on line (available on each function) to support the user while connecting the instrument to the installation under measurement
More informationHT FAMILY 2000 METERS. Integrated meter for test verifies on electrical installations
HT FAMILY 2000 METERS Integrated meter for test verifies on electrical installations DESCRIPTION ISOTEST200 model performs Insulation Resistance measurements on each electrical installation with test voltage
More informationGSC57 & GSC53N. Integrated meter for test verify and Power Quality analysis
GSC57 & GSC53N Integrated meter for test verify and Power Quality analysis DESCRIPTION GSC57 is the most complete model of the entire meters designed to verifies both on electrical installations according
More informationHT FAMILY M70 METERS. Advanced DMM with safety and LAN cables test verifies HT ITALIA
HT FAMILY M70 METERS Advanced DMM with safety and LAN cables test verifies HT ITALIA HT Family M70 meters Contents: 1. Part one: M70 & M71 2. Part two: M72 & M73 3. Part three: M74 & M75 1 M70 & M71 M70:
More informationGSC57 Rel of 257/10/05
Integrated meter for test verify and Power Quality analysis Pag 1 of 7 1. ELECTRICAL SPECIFICATIONS VERIFY TESTS Accuracy is indicated as ± (% readings + no. of digits) at 23 C ± 5 C, con relative humidity
More informationMACROTEST G1 & G2. I'm pure technology. Touch me, please.
MACROTEST G1 & G2 I'm pure technology. Touch me, please. 5 Clear answer. Complying o not. Save time! You will take half time! Color Touch Screen with icon intuitive graphics Wi-Fi and USB Power measurement
More informationPQA823 PQA824 Rel /01/2007
Professional Power Quality Analyzers in compliance to EN50160 Pag 1 of 5 1. PQA82X INNOVATIVE FEATURES A wide (320x240pxls) graphical color TFT display with touch screen it s available for each model in
More informationPQA823 PQA824 Rel /03/2007
Professional Power Quality Analyzers in compliance to EN50160 Pag 1 of 5 1. PQA82X INNOVATIVE FEATURES A wide (320x240pxls) graphical color TFT display with touch screen to surf the internal functions
More informationSOLAR300N Rel /01/10
Photovoltaic installation certifier + professional network analyzer Pag 1 of 5 1. SOLAR300N MAIN FEATURES SOLAR300N performs all tests on PV plants by using of SOLAR-02 remote unit which, after a preliminary
More informationPVCHECK Rel /01/13
Meter for safety, functionality and performance on PV plants Pag 1 of 6 The multifunction instrument PVCHECK performs prompt and safe electrical checks required for a PV system (DC section) and controls
More informationAutomotive Scope/GMM/OBD II Code Reader
Finest 1006 Automotive Scope/GMM/OBD II Code Reader Automotive On-board diagnostic systems of thesedays have gone a long way toward helping you locate a problem. But those systems aren't perfect and they
More informationDM-III Multitest & DM-III Multitest F Power Quality Recorders
DM-III Multitest & DM-III Multitest F Power Quality Recorders CAT 600V TRUE RMSz Amprobe s full-featured Three-Phase Power Quality Recorders provide the essential functions and capabilities required to
More informationDM-III MULTITEST Power Quality Recorder
DM-III MULTITEST Power Quality Recorder Amprobe s full-featured Three-Phase Power Quality Recorders provide the essential functions and capabilities required to operate accurately and effectively in today
More informationEurotest 61557, Instaltest 61557
, Instaltest 61557, Instaltest 61557 Ultimate Instruments for Complete Testing of Electrical Installations Testing Measuring Analysing Recording No. 118740 VDE 0100 BS 7671 CEI 64.8 HD 384 EN 61557 VDE
More informationPQA823 PQA824 Rel /09/18
Professional Power Quality Analyzers in compliance to EN50160 Pag 1 of 10 1. PQA82X INNOVATIVE FEATURES A wide (320x240pxls) graphical color TFT display with touch screen to surf the internal functions
More informationThe future of installation testing is here. The Fluke 1650 Series Multifunction Testers
The future of installation testing is here The Fluke 50 Series Multifunction Testers Fluke 50 Series Safer, easier installation testing. The 50 Series testers verify the safety of electrical installations
More informationTestboy TV 416/432(A) CEE adapter*
Testboy TV 416/432(A) CEE adapter* The Testboy TV 416/432(A) is a compact CEE adapter, comprising of a combination of CEE plug (16 A or 32 A), shockproof socket and self-closing flap cover, as well as
More information400 Series. User manual
User manual Copyright HT ITALIA 2014 Release EN 2.02-24/09/2014 EN - 1 400 Series Table of contents: 1. SAFETY PRECAUTIONS AND PROCEDURES... 4 1.1. Preliminary instructions... 4 1.2. During use... 4 1.3.
More informationInsulation Testers and Earth Ground Testers
Insulation Testers and Earth Ground Testers With a 5000 V MegOhmMeter for industrial-strength insulation testing and a range of compact hand-held instruments, we offer a solution for every troubleshooting
More informationThe first installation safety tester with automated testing based on patent pending AUTO SEQUENCE.
EurotestAT MI 3101 The first installation safety tester with automated testing based on patent pending AUT SEQUENCE. Concentrate on your work instead on the instruction manual of your test instrument.
More informationThe future of installation testing is here. The 1650 Series Multifunction Testers
The future of installation testing is here The 50 Series Multifunction Testers 50 Series Safer, easier installation testing. Robin and Fluke joined forces in 999 to become the largest supplier of hand-held
More informationRevolution. PQA820 MACROTESTG3 COMBIG2 HTANALYSIS
Revolution. PQA820 MACROTESTG3 COMBIG2 HTANALYSIS Artificial Intelligence. Thanks to the creation of App HTanalysis it is possible to interface HT last generation instruments with tablets and smartphones.
More informationSECULIFE SR PC Controllable Instrument for Measuring Safety-Relevant Characteristic Values of Electrical Devices /2.
3-349-443-03 3/2.12 Applications Testing for the Electrical Safety of Electrical Medical Devices in Accordance with the German Medical Product Law (MPG) / MDD The test instrument is used for quick and
More informationTesters: / Ohmmeters Insulation Measuring Instruments. n Compact and rugged for service calls and laboratory use. Scope of delivery:
Table of Contents Testers: / Ohmmeters Insulation Measuring Instruments 51 METRAOHM 413 Article: M630A Digital Low-Resistance Measuring Instrument for Measuring Protective Conductors, Equipotential Bonding
More informationCurrent Clamp. 210
Our range of devices includes clamp meters for measuring current leaks, AC and DC current, voltage, power, resistance, continuity, capacitance or frequency. Some clamp meters have a clearly arranged display
More informationMIT400 CAT IV Industrial Insulation Testers
MIT400 CAT IV MIT400 CAT IV CAT IV 600 V applications TRMS & DC Voltage measurement Insulation testing up to 1000 V and 200 GΩ Continuity testing at 200 ma or 20 ma down to 0.01 Ω Pass/Fail limit alarms
More informationMIT400/2. CAT IV Insulation testers MIT430/2: CAT IV Insulation testers
MIT400/2 Designed for electrical and industrial testing Insulation testing up to 1000 V and 200 GΩ range Stabilized insulation test voltage (New) Single range, faster continuity testing from 0.01 Ω to
More information1650 Series Multifunction Installation Testers
1650 Series Multifunction Installation Testers New RCD Type B Compatibility Extra functionality, faster testing, and as rugged as ever Fluke 1654B Fluke 1653B Fluke 1652C Safer, easier installation testing.
More informationMIT400 CAT IV Industrial Insulation Testers
MIT400 CAT IV MIT400 CAT IV CAT IV 600 V applications TRMS & DC Voltage measurement Insulation testing up to 1000 V and 200 GΩ Continuity testing at 200 ma or 20 ma down to 0.01 Ω Pass/Fail limit alarms
More informationMIT415 Insulation tester
MIT415 Insulation tester General features o 10V & 100V ESD testing o 25V, 50V, 250V & 500V additional ranges o Insulation testing up to 50Gohms (500V) o Continuity testing at 200mA or 20mA from 0.01ohms
More informationC.A 6117 C.A 6116N C.A 6113 Multi-function installation testers
C.A 6117 C.A 6116N C.A 6113 Multi-function installation testers in Safety for your electrical installations, high performance of a unique instrument. 600 V CAT III Testing according to the international
More information1507/1503. Insulation Testers. Technical Data. Features and benefits:
1507/1503 Insulation Testers Technical Data The Fluke 1507 and 1503 Insulation Testers are compact, rugged, reliable, and easy to use. With their multiple test voltages, they are ideal for many troubleshooting,
More informationTORKEL 900-series Battery Load Unit
TORKEL 900-series Batteries can be tested in service Dynamic discharge technology full power at all voltages Safety in all details, e.g. detection of blocked airflow Real time monitoring during test Easy
More informationUser manual GSC60 Copyright HT ITALIA 2017 Release EN /05/2017
User manual Copyright HT ITALIA 2017 Release EN 1.02-16/05/2017 EN - 1 GSC60 Table of contents: 1. PRECAUTIONS AND SAFETY MEASURES... 3 1.1. Preliminary instructions... 3 1.2. During use... 4 1.3. After
More informationTORKEL 900-series Battery Load Unit
Batteries can be tested in service Dynamic discharge technology full power at all voltages Safety in all details, e.g. detection of blocked airflow Real time monitoring during test Quick report Easily
More informationMETREL Measuring and Regulation Equipment
METREL Measuring and Regulation Equipment ELECTRICAL INSTALLATION SAFETY MI 3108 EurotestPV MI 2230 VAFMeter MACHINES/APPLIANCES/SWITCHGEAR SAFETY A 1322 Active 3-phase Adapter MI 3310 SigmaGT HIGH VOLTAGE
More informationMIT400/2 CAT IV Insulation testers
MIT400/2 CAT IV Insulation testers MIT400/2 CAT IV Insulation testers Designed for Electrical and Industrial testing Insulation testing up to 1000 V and 200 GΩ range Stabilised insulation test voltage
More information1587/1577. Insulation Multimeters. Technical Data. Two powerful tools in one.
Test Equipment Depot - 800.517.8431-99 Washington Street Melrose, MA 02176 - TestEquipmentDepot.com 1587/1577 Insulation Multimeters Technical Data Two powerful tools in one. The Fluke 1587 and 1577 Insulation
More informationFluke 1660 Series Multifunction Installation Testers
TECHNICAL DATA Fluke 1660 Series Multifunction Installation Testers Reduce test time up to 40 % with Auto Test Auto Test does 5 required installation tests in one sequence, including selectable Type A,
More informationFluke and
Fluke 1623-2 and 1625-2 GEO Earth Ground Testers Technical Data The new Fluke 1623-2 and 1625-2 GEO Earth Ground Testers offer data storage and download capabilities via USB port. World class accessories
More informationFluke 345. Power Quality Clamp Meter. The ideal meter for commissioning and troubleshooting modern electrical loads
Fluke 345 Power Quality Clamp Meter Technical Data The ideal meter for commissioning and troubleshooting modern electrical loads With a bright color display to analyze the harmonic spectrum, a low-pass
More informationUAT-600 Series. amprobe.com
UAT-600 Series Underground Utilities Locator Accurately and safely pinpoint underground utilities before you dig Accidentally hitting a utility line during a project can lead to costly repairs and create
More informationINSULATION TESTER SERIES
INSULATION TESTER SERIES Field measuring instruments A Full Line-up of Insulation Testers to Suit Any Need From Basic Testing to High Performance Analysis 2 INSULATION TESTER SERIES Selection guide IR4056-20
More information1587/1577 Insulation Multimeters
1587/1577 Insulation Multimeters Technical Data Two powerful tools in one. The Fluke 1587 and 1577 Insulation Multimeters combine a digital insulation tester with a full-featured, true-rms digital multimeter
More informationFluke 355 and 353 True-rms 2000 A Clamp Meters Versatile and rugged tools for applications with high currents
Versatile and rugged tools for applications with high currents Confidently take reliable readings with the True-rms, Fluke 355 and 353 digital clamp meters; the tools of choice for high current clamp-on
More informationInstallation Tester BENNING IT 130. Operating Manual
Installation Tester BENNING IT 130 Operating Manual Manufacturer: BENNING Elektrotechnik und Elektronik GmbH & Co. KG Münsterstraße 135-137 D - 46397 Bocholt Phone: +49 (0) 2871-93 - 0 Fax: +49 (0) 2871-93
More informationUSER MANUAL. Model MA A AC Mini Clamp-on Meter. Additional User Manual Translations available at
USER MANUAL Model MA150 200A AC Mini Clamp-on Meter Additional User Manual Translations available at www.extech.com Introduction Thank you for selecting the Extech MA150 AC Mini Clamp Meter. This device
More informationGx Series. User manual
User manual Copyright HT ITALIA 2015 Release EN 2.03-06/03/2015 EN - 1 Gx Series Table of contents: 1. PRECAUTIONS AND SAFETY MEASURES... 3 1.1. Preliminary instructions... 3 1.2. During use... 4 1.3.
More informationFluke 1660 Series Multifunction Installation Testers
TECHNICAL DATA Fluke 1660 Series Multifunction Installation Testers Reduce test time up to 40 % with Auto Test Auto Test does 5 required installation tests in one sequence, including selectable Type A,
More informationMIT400 CAT IV Industrial Insulation Testers
MIT400 CAT IV Industrial Insulation Testers MIT400 CAT IV Industrial Insulation Testers CAT IV 600 V applications Insulation testing up to 1000 V and 200 GΩ Continuity testing at 200 ma or 20 ma down to
More informationPV200. Why buy the PV200? The most compact I-V curve tracer around.
The PV200 is a compact & cost effective I-V curve tracer that uses simple push button operation making it an efficient and versatile tester for PV systems. 999 datasets can be stored on the instrument
More informationPV210. Why buy the PV210?
The PV210 is a compact & cost effective I-V curve tracer that utilizes NFC technology, eliminating the need for a laptop on site. I-V curve tracing is made fast with simple push button operation; making
More informationMETRATESTER 5+ Tester for DIN VDE /6.15
3-348-817-03 15/6.15 Applications Electrical safety testing of electrical equipment: per DIN VDE 0701-0702: 2008 by means of measurement of: Protective conductor resistance Insulation resistance Protective
More informationFINE INSTRUMENTS CORPORATION
Model 41 Resistance USER S MANUAL a world leader in test & measurement FINE INSTRUMENTS CORPORATION B11, A-DONG, SMART VALLEY, SONGDOMIRAE-RO 3, YEONSU-GU, INCHEON, KOREA - TEL: (82-32) 837-5777 - FAX:
More informationInstallation Tester BENNING IT 115. Operating Manual
Installation Tester BENNING IT 115 Operating Manual Manufacturer: BENNING Elektrotechnik und Elektronik GmbH & Co. KG Münsterstraße 135-137 D - 46397 Bocholt Phone: +49 (0) 2871-93 - 0 Fax: +49 (0) 2871-93
More informationINSULATION TESTER SERIES. Flip the Cover. A Full Line-up of Insulation Testers to Suit Any Need. From Basic Testing to High Performance Analysis
INSULATION TESTER SERIES Field measuring instruments A Full Line-up of Insulation Testers to Suit Any Need Flip the Cover From Basic Testing to High Performance Analysis 2 INSULATION TESTER SERIES Selection
More informationINSULATION TESTER SERIES Selection guide
INSULATION TESTER SERIES Selection guide Model IR4056 IR4057 IR4053 IR4016 to IR4018 3490 3455 Basic Specifications (Bar graph) Analog Meter IR4016 IR4017 IR4018 Analog Meter backlight function 3 3 3 3
More informationMS2030 CAT III 600 V A V AUTO RS232
MS2030 AC Digital Clamp Meter User s Manual CAT III 600 V AUTO RS232 A V CONTENTS 1.Introduction...1 2.Safety Information...1 2.1 Precautions...1 2.2 Safety Symbols...3 3. Description...4 3.1 Front Panel...4
More informationPen-type DIGITAL MULTITESTER
BST-MT267 Pen-type DIGITAL MULTITESTER INSTRUCTION MANUAL Index 1. Introduction... 2. Safety Notes... 3. Features... 4. Specifications... 5. General... 6. Instrument Layout... 7. Measurement... 8. Maintenance...
More informationDVM645BI BENCH MULTIMETER TAFELMULTIMETER MULTIMETRE DE TABLE BANCO MULTÍMETRO TISCHMULTIMETER. User Manual. Gebruikershandleiding
BENCH MULTIMETER TAFELMULTIMETER MULTIMETRE DE TABLE BANCO MULTÍMETRO TISCHMULTIMETER User Manual Gebruikershandleiding Manuel d'utilisation Gebrauchsanleitung Introduction BENCH MULTIMETER This manual
More informationMIT400 Series CAT IV Insulation Resistance and Continuity Testers
Insulation testing up to 1000 V and 200 GΩ Patented analog arc and dual digital display CAT IV 600 V rating TRMS & DC Voltage measurement Continuity testing at 200 ma or 20 ma down to 0.01 Pass/Fail limit
More informationPortable equipment for insulation fault location for unearthed and earthed systems (IT and TN systems) to be used in conjunction with or without an
EDS309 Portable equipment for insulation fault location for unearthed and earthed systems (IT and TN systems) to be used in conjunction with or without an equipment for insulation fault location EDS309x_D00012_02_D_XXEN/11.2018
More informationPROFiTEST C Test Instrument per DIN VDE /11.10
3-349-075-03 15/11.10 Testing of Residual-Current Devices (RCDs) Measures contact voltage without tripping the RCCB. Contact voltage relative to nominal residual current is measured with 1 / 3 nominal
More informationWinding Ohmmeter & Tap Changer Test Set RMO10TW
Winding Ohmmeter & Tap Changer Test Set RMO10TW Lightweight - only 7,5 kg Test current 5 ma 10 A DC Measuring range 0,1 µω - 2 kω Two voltage sense channels Extremely quick measurement Automatic discharge
More informationMETRAClip87 and 88 Clamp Multimeters
3-349-795-03 1/7.14 Current and frequency measurement via clamp meter: METRAClip87: 1500 A AC TRMS and 1500 A DC METRAClip88: 2000 A AC TRMS and 3000 A DC Multimeter functions via connector sockets: V
More informationMULTIFUNCTION TEST INSTRUMENT
VR2250 INSTALLATION ANALYSER MULTIFUNCTION TEST INSTRUMENT USER INSTRUCTION MANUAL Page 1 of 131 TABLE OF CONTENTS 1. SAFETY PRECAUTIONS AND PROCEDURES... 5 1.1. Forwards... 5 1.2. Preliminary Instruction...
More informationGOSSEN METRAWATT. Testers
Testers 45 Testers Protective measures in electrical systems are intended to prevent bodily injury due to accidents involving electrical current. Of course they also prevent property damage caused by electrical
More informationFluke 1740 Series. Three-Phase Power Quality Loggers Memobox. Assess power quality and conduct long-term studies with ease
Fluke 1740 Series Three-Phase Power Quality Loggers Memobox Technical Data Assess power quality and conduct long-term studies with ease Compact and rugged, the Fluke 1740 Series three-phase power quality
More informationUser s Guide. Model MA A AC Mini Clamp-on Meter
User s Guide Model MA150 200A AC Mini Clamp-on Meter Introduction Congratulations on your purchase of Extech s MA150 AC Mini Clamp Meter. This meter is shipped fully tested and calibrated and, with proper
More informationDM-5 Power Quality Analyzer
amprobe.com DM-5 Power Quality Analyzer With Feature Packed Software, most Compact High Performance Power Quality Analyzer in its Class Poor power quality is costly not only can it drive up energy bills
More information1650 Series Multifunction Installation Testers
1650 Series Multifunction Installation Testers Fluke 1654B Fluke 1653B Fluke 1652C BS7671 17th Edition IEE Wiring Regulations IEC 60364.6.61, HD 384 6 AA Cell batteries C1600 Hard carrying case Zero Adapter
More informationPROFiTEST C Test Instrument per DIN VDE /8.14
3-349-075-03 16/8.14 Testing of Residual-Current Devices (RCDs) Measures contact voltage without tripping the RCCB. Contact voltage relative to nominal residual current is measured with 1 / 3 nominal residual
More informationMIT480/2 Insulation testers
MIT480/2 Insulation testers MIT480/2 Insulation testers Insulation testing up to 500 V and 100 GΩ range in a hand held instrument 3 wire connection for A, B and E (Tip, Ring and Earth) connection (New)
More informationFluke Fluke-Direct.ca. Three-Phase Power Logger. Technical Data
Fluke 1735 Three-Phase Power Logger Technical Data Electrical load studies, energy consumption testing, and general power quality logging The Fluke 1735 Three-Phase Power Logger is the ideal electrician
More informationC.A 6115N. Safety at all costs. IEE 16th: Electrical installation IEC/EN I E C. Insulation RCD. Earth. Loop. Continuity.
IEE 16th: Safety at all costs C.A 6115N Electrical installation Insulation RCD Earth Loop Continuity Phase rotation I E C CONFIRMS TO CONFIRMS TO IEC/EN 61557 1010-1 III 300V Cat Cat The most complete
More informationMIT400/2 CAT IV Insulation testers
MIT400/2 CAT IV Insulation testers MIT400/2 CAT IV Insulation testers Designed for Electrical and Industrial testing Insulation testing up to 1000 V and 200 GΩ range Stabilised insulation test voltage
More informationIDEAL INDUSTRIES, INC. TECHNICAL MANUAL MODEL:
IDEAL INDUSTRIES, INC. TECHNICAL MANUAL MODEL: 61-352 The Service Information provides the following information: Precautions and safety information Specifications Basic maintenance (cleaning, replacing
More informationWinding Ohmmeter & Tap Changer Test Set RMO40TD with Demagnetizer
Winding Ohmmeter & Tap Changer Test Set RMO40TD with Demagnetizer Lightweight 9,5 kg Test current 5 ma 40 A DC Measuring range 0,1-2 k Two voltage sense channels Extremely quick measurement Rapid automatic
More informationQA-ES III Electrosurgical Analyzer
QA-ES III Electrosurgical Analyzer Technical Data The QA-ES III Electrosurgical Analyzer simplifies testing to ensure the performance and safety of electrosurgical units. With generator output current
More informationQA-ES III Electrosurgical Analyzer
QA-ES III Electrosurgical Analyzer Technical Data The QA-ES III Electrosurgical Analyzer simplifies testing to ensure the performance and safety of electrosurgical units. With generator output current
More informationEurotestEASI MI 3100 SE MI 3100 s Instruction manual Version 1.1, Code no
EurotestEASI MI 3100 SE MI 3100 s Instruction manual Version 1.1, Code no. 20 752 131 Distributor: Manufacturer: METREL d.d. Ljubljanska cesta 77 1354 Horjul Slovenia web site: http://www.metrel.si e-mail:
More informationRISH MIT 30 Analog Digital Multimeter with Insulation Resistance Measurement
RISH MIT 30 Analog Digital Multimeter with Insulation Resistance Measurement Data Sheet Analog Digital Multimeter with Insulation resistance www.rishabh.co.in Page 1 of 6 Version: J 28/12/2011 Application
More informationT5-600/T Electrical Tester
T5-600/T5-1000 Service Information Introduction This service information sheet provides the following information for the T5-600 and T5-1000 Electrical Testers (hereafter referred to as "the tester").
More informationATK Clamp Meter
ATK-2209 Clamp Meter User s Manual Title CONTENTS Page I. SAFETY INFORMATION... 1 II. TECHNICAL SPECIFICATIONS... 2 2-1 Environment Conditions... 2 2-2 Maintenance... 2 2-3 Features... 2 2-4 General Specifications...
More informationDM-45 Digital Multimeter
INSTRUCTION MANUAL DM-45 Digital Multimeter Read and understand all of the instructions and safety information in this manual before operating or servicing this tool. Description The Greenlee DM-45 Digital
More informationAnalog Digital Multimeter with Insulation Resistance Measurement
RISH MIT 30 Product Features: RISH MIT 30 is Analog Digital Multimeter with insulation resistance measurement, which measures VAC, VDC, VAC+DC,Frequency, ma DC, ma AC+DC,Resistance, continuity, Diode,
More informationMIT400 CAT IV Industrial Insulation Testers
MIT400 CAT IV MIT400 CAT IV n CAT IV 600 V applications n TRMS & DC Voltage measurement n Insulation testing up to 1000 V and 200 GΩ n Continuity testing at 200 ma or 20 ma down to 0.01 Ω n Pass/Fail limit
More informationMeasure voltage without test leads. Product Highlights
Measure voltage without test leads Measure voltage up to 1000 V ac through the open fork, without test lead contact to live voltage. + Without opening covers or removing wire nuts. On wires up to AWG 4/0
More informationOPERATOR S INSTRUCTION MANUAL
OPERATOR S INSTRUCTION MANUAL AUTO-RANGE DUAL DISPLAY CONFORMED IEC1010 DIGITAL MULTIMETER CONTENTS PAGE SAFETY INFORMATION..... DESCRIPTION.. OPERATING INSTRUCTION.. SPECIFICATIONS.... ACCESSORIES. BATTERY
More information30XR-A Professional Digital Multimeter Users Manual
Professional Digital Multimeter Users Manual 99 Washington Street Melrose, MA 076 Fax 78-665-0780 TestEquipmentDepot.com MADE IN TAIWAN PATENTS PENDING www.amprobe.com MIN 5 00 00 0 0 00m 00m 00 0M m M
More informationEurotestCOMBO MI 3125 / MI 3125E Short instructions Version 2.2, Code no
EurotestCOMBO MI 3125 / MI 3125E Short instructions Version 2.2, Code no. 20 751 519 Distributor: Manufacturer: METREL d.d. Ljubljanska cesta 77 1354 Horjul Slovenia web site: http://www.metrel.si e-mail:
More informationEurotestXE MI 3102H BT, MI 3102 BT Instruction manual Version 1.0, Code no
EurotestXE MI 3102H BT, MI 3102 BT Instruction manual Version 1.0, Code no. 20 752 160 Distributor: Manufacturer: METREL d.d. Ljubljanska cesta 77 1354 Horjul Slovenia web site: http://www.metrel.si e-mail:
More informationU1730C Series Handheld LCR Meters
DATA SHEET Take your expectations higher with the latest LCR meters U1730C Series Handheld LCR Meters The Keysight Technologies, Inc. U1730C Series handheld LCR meters allow you to measure at frequencies
More informationFrequency up to 100 khz
Features Key features 20,000 counts resolution 0.2% basic accuracy Wide LCR ranges with three to five selectable test frequencies (up to 100 khz for U1733C) Auto identification (Ai) automatically determines
More informationLeading the World in PV Test Solutions
seawardsolar.com Leading the World in PV Test Solutions seawardsolar.com/usa The Seaward Solar range of electrical safety test solutions enables PV installers to meet all testing and certification requirements
More informationMETRISO. Analog Insulation, Low Resistance and Voltage Measurement Instrument /9.14
3-349-813-3 1/9.14 Insulation measurement per EN 61557-2/VDE 413, part 2 Test voltages: 5 V, 1 V, 25 V, 5 V and 1 V Analog display of measured values and limit values Intelligent filter precise and measurement-dependent
More informationMETRAClip85 and 86 Clamp Multimeters
3-349-794-03 1/8.14 Current and frequency measurement via clamp meter: 600 A AC TRMS and 900 A DC (automatic or manual switching) Multimeter functions via connector sockets: V (AC TRMS and DC) up to 1000
More informationTechnical data ESA614 Electrical Safety Analyzer
Technical data ESA614 Electrical Safety Analyzer The ESA614 Electrical Safety Analyzer brings fast and simple automated testing in the form of a portable analyzer to healthcare technology professionals
More information