ADP3-0C Digital display symbols for all three phases: I - U-PF -Hz -P- Q-S, active energy export/import by IR side set up communication Power-meters three-phase Direct connection 0 A Application The new digital power-meters with green backlight LCD display, made forafast and correct reading, are ideal instruments for installation in distribution panels, where user can easily read and control more quantities for the three phases. They are also used to measure the energy of three phases systems, for example in residential, generic and industrial applications. They are provided with two outputs: one for active imported energy, the other one for active exported energy. The products can be set up to communicate with LAN TCP/IP, Modbus RTU, M-Bus, EIB-KNX and SD-Card Datalogger. Interfaces are used to analyze the energy-consumption to reduce the running cost toaminimum for Industrial plants and buildings like Offices, Hospitals, Universities etc. ADP3-0C Imp/ Function Display Unit ID Current A L, L, L3 Tensions related V L-N, L-N, L3-N Tensions between phases V L-L, L-L3, L3-L Power factor PF L, L, L3 Frequency Hz L Active power (k-m) W Utilization and instantaneous value L, L, L3 Reactive power (k-m) var Utilization and instantaneous value L, L, L3 Apparent power (k-m) VA Utilization and instantaneous value L, L, L3 Active energy Tariff (M)-(K) Wh Energy absorbed or supplied L Connection errors PHASE Err Primary transformer 5....000/5 A CT (current transformer) Communication modules
Display Liquid crystal display with illuminated green background Line in use (L /L-L3- L) Inductive power on L Capacitive power on L Measured value Measured value Energy /Power import (absorbed Imp ) Energy /Power export (supplied Exp ) Running tariff Power factor Frequency Capacitive power on L Inductive power on L Line in use (L /L-L3) Units Line in use (L3 / L3-L) Inductive power on L3 Capacitive power on L3 4 standard module housing, suitable for DIN rail mounting Connection through CT.../5 A till.000/5 A Sealable terminal covers Precision control LED Terminals SO pulse outlet Backlighting makes display easy to read Optic control IR for external communication Up Down Menu Button OK Supply terminals CT connection 5 to.000 A
ADP3-0C Imp/ Direct connection 0 A Overview These multimeters are ideal instruments for installation in distribution panels, where user can easily read and control more quantities for the three phases. They are provided with two outputs: one for active imported energy, the other one for active exported energy. Liquid crystal display with illuminated green background can monitor all three phases For direct connection 0 A, or for transformer.../5 A For transformer primary current of 5 A to.000/5 A. Input is in 5 A increments Detection of connection errors (phase transposition) Accuracy class precision for the current, voltage Accuracy class precision and power and energy active according toen 5040-3 (B) Accuracy class precision for the reactive power according to EN 6053-3 Version without pulse output (cod. ECSPM-ECSPM06) Version withpulse output (cod. ECSPM4 - ECSPM) Version with pulse output and set up for communication (cod.ecspm3-) - ( pulse output for export energy) - ( pulse output for import energy) Two pulse / selection for model cod. ECSPM- Front LED pulses per selection for model cod. ECSPM- Energy register zero setting Energy register for import and export 4 DIN modules wide ( mm) Technical data Data in compliance with EN 5040-, EN 5040-3, EN 6053-3 and EN 6053-3 ECSPM -ECSPM4 ECSPM06 -ECSPM ECSPM3 direct connection 0 A CT connect. till.000/5 A General characteristics Housing DIN 430 DIN 4 modules 4 modules Mounting EN 605 35 mm DIN rail DIN rail Depth mm 0 0 Reference standard active energy - EN 5040--3 EN 5040--3 reactive energy - pulse output EN 6053-3-3 EN 6053-3-3 Operating features Connectivity to single/three-phase network n wires -4 4 Storage of energy values and configuration internal flash memory - yes yes Tarif for active energy - Tarif Tarif Supply Rated control supply voltage Un VAC 30 30 Operating range voltage V 4... 6 4... 6 Rated frequency fn Hz 50 ±% 50 ±% Rated power dissipation (max. for phase) Pv VA (W) (0.6) (0.6) Overload capability Voltage Un continuous; phase/phase V 40 40 second: phase/phase V 00 00 continuous; phase/n V 6 6 second: phase/n V 300 300 Current Imax continuous A 0 6 momentary (0,5 s) A - 0 momentary ( ms) A 400 - Display (readouts) Connection errors and phase out discernible from phase-sequence indic. - PHASE Err PHASE Err Display type LCD - Energy n digits (... 3 decimal) (... 3 decimal) LCD - Largeness instantaneou n digits 4 (... 3 decimal) 4 (... 3 decimal) digit dimensions mm xmm 6.00 x 3 6.00 x 3 Active energy: display, digit tariff Wh 0.0 0.0 + display import or export (arrow) overflow MWh.. Instantaneous active power: 3 display, 3-digit W, kw or MW 000.... 000.... Instantaneous reactive power: 3 display, 3-digit var, kvar or Mvar 000.... 000.... Instantaneous apparent power: 3 display, 3-digit VA, kva or MVA 000.... 000.... Instantaneous tariff display, -digit - T T Transformer primary current A - 5....000 Display period refresh s Measuring accuracy Active energy and power acc.to EN 5040-3 class B B Reactive and apparent power acc.to EN 6053-3 class Measuring input Type of connection direct transformer.../5 A Voltage Un phase/phase V 400 400 phase/n V 30 30 Operating range voltage phase/phase V 3... 40 3... 40 phase/n V 4... 6 4... 6 Current Iref A 5 - Current In A - 5 Current Imin A 0.5 0.05 Operating range current (Ist... Imax) direct connection A 0.05... 0 - transformer connection A - 0.003... 6 Transformer current primary current of the transformer A - 5...000 smallest input step adjus. in 5 A steps A - 5 3
Technical data Data in compliance with EN 5040-, EN 5040-3, EN 6053-3 and EN 6053-3 ECSPM -ECSPM4 ECSPM06 -ECSPM ECSPM3 direct connection 0 A CT connect. till.000/5 A Measuring input Frequency Hz 50 50 Input waveform - sinusoidal sinusoidal Starting current for energy (Ist) ma 5 3 Pulse output SO acc.to EN 6053-3 (only for ECSPM-ECSPM4-ECSPM3-) pulse output pulse output for energy export - yes yes pulse output for energy import - yes yes Terminal output for direct connection 0 A Imp/ adjustable (max. 000) - depending on the transf. factor, adjus. Imp/ - adjustable (depends on CT) Pulse duration ms 30 ± ms 30 ± ms Required voltage min. (max.) VAC (DC) 5... 30 ±5% (5... 300) 5... 30 ±5% (5... 300) Permissible current pulse ON (max. 30 V AC/DC) ma 0 0 Permissible current Imp. OFF (leak. cur. max. 30VAC/DC) µa Safety acc. to EN 5040- Indoor meter - yes yes Degree of pollution - Operational voltage V 300 300 AC voltage test (EN 5040-3,.) kv 4 4 Impulse voltage test./50 µs-kv 6 6 Protection class (EN 5040) class II II Housing material flame resistance UL 4 class V0 V0 Adaptor for Communication (only for ECSPM3-) Plug-and-play technology - LAN (TCP/IP) interface Ethernet 0.3 - /0 Mbps /0 Mbps Modbus RTU, Ascii interface RS-45-3 wires - up to.00 bps up to.00 bps M-Bus interface wires - up to.600 bps up to.600 bps EIB-KNX interface EIB-standard - up to.600 bps up to.600 bps SD-Card Datalogger - to Gigabytes to Gigabytes Connection terminals Type cage main current paths screw head Z +/- POZIDRIV PZ PZ Type cage pulse output blade for slotted screw mm 0. x 3.5 0. x 3.5 Terminal capacity main current paths solid wire min. (max.) mm.5 (35).5 (6) stranded wire with sleeve min. (max.) mm.5 (35).5 (6) Terminal capacity pulse outlet solid wire min. (max.) mm 0.4 (.5) 0.4 (.5) stranded wire with sleeve min. (max.) mm 0.4 (.5) 0.4 (.5) Environmental conditions Mechanical environment - M M Electromagnetic environment - E E Operating temperature C -... +55 -... +55 Limit temperature of transportation and storage C -5... +0-5... +0 Relative humidity (not condensation) % 0 0 Vibrations 50 Hz sinusoidal vibration amplitude mm ±0.05 ±0.05 Degree protection housing when mounted in front (term.) - (*) For the installation in a cabinet at least with IP5 protection. IP5(*)/IP0 IP5(*)/IP0 Selection and ordering data digital display sim for all three phases: I-U - PF -Hz - P -Q-S active energy export/import -4modules DIN Version without pulse output ECSPM ECSPM06 Version with pulse output ECSPM4 ECSPM Version with pulse output set up for communication ECSPM3 direct connection0.5-5 (0) A digital display sim for all three phases: I -U-PF-Hz-P-Q-Sactive energy export/import with connection by CT.../5 A, up to.000/5 A - 0.05-5 (6) A direct connection0.5-5 (0) A - tariff - with connection by CT.../5 A, up to.000/5 A - 0.05-5 (6) A-tariff- direct connection0.5-5 (0) A - tariff - - set up for communication with connection by CT.../5 A, up to.000/5 A - 0.05-5 (6) A-tariff--set up for communication Optional - additional communication modules - module DIN 4
Direct connection 0 A Overall dimensions ECSPM - ECSPM4 - ECSPM3 45 0 6 44 64 Circuit diagrams NEIN-NO - NON Imp./ ECSPM ECSPM4-ECSPM3 ECSPM4-ECSPM3 ECSPM4-ECSPM3 Wire N needs to be connected to the meter A fuse of 0 A is recommended for the line protection. 5