RISH Master 3430 DIGITAL MULTI-FUNCTION TRANSDUCER. Electro-Meters
|
|
- Mary Wells
- 6 years ago
- Views:
Transcription
1 measures important electrical parameters in phase and single phase etwork & replaces the multiple analog panel meters. It measures electrical parameters like AC current, Voltage, frequency, Power, Energy (Active/ Reactive/Apparent), Harmonic Distortion. The instrument has optional output as one pulse output or two pulse output for energy measurement. %THD On site programmable PT/CT ratios: It is possible to program primary of external potential Transformer (PT), primary of external Current Transformer (CT) on site via front panel keys by entering into Programming mode. User selectable CT Secondary 5A/A The secondary of external Current Transformer (CT) can be programmed on site to either 5A or A using front panel keys. User selectable phase W or 4W User can program on site the network connection as either Phase Wire or 4 Wire using front panel keys. For single phase applications, single phase version is available. ow back depth: The instrument has very low back depth (behind the panel) of less than 80 mm in spite of optional features like pulse output Onsite selection of Auto scroll / Fixed Screen User can set the display in auto scrolling mode or fixed screen mode using front panel keys. Energy measurement (Import and Export): Active energy (kwhr), Reactive energy (kvarhr) and Apparent energy ( kvahr). Any of the parameters can be freely assigned to optional pulse outputs. Energy Update Rate ( Phase only): This updates the energy values in the registers depending on the energy rate selected by the user. Energy update rate can be set from min. to 60 min. True RMS measurement th The instrument measures distorted waveform up to 5 Harmonic. High brightness line 4 digits ED display: Simultaneous display of Parameters umber of parameters measured: up to 48 The instrument measures 48 electrical parameters of Phase network. Parameter Screen recall: In case of power failure, the instrument memorizes the last displayed screen. The displayed screen will get memorized only if user keeps this screen for minimum 40 sec duration before power failure for fixed screen mod. User selectable ow Current suppression (below 0 ma) User can suppress the readings below 0 ma in the current measurement by onsite programming if required. Total Harmonic Distortion (THD): The instrument can measures per phase THD of voltage and THD of current. Programmable Energy format & Energy rollover count: Customer can assign the format for energy display on MODBUS (RS485) in terms of W, kw or MW. Additional to this, customer can also set a rollover count from 7 to 4 digits (for W), 7 to digits (for kw) & 7 to 9 digits (for MW), after which the energy will roll back to zero. The above settings are applicable for all types of energy. Energy Count storage: In case of power failure, the instrument memorizes the last energy count. Every 40 sec, the instrument updates the energy counter in the non-volatile memory. Min Max storage of parameters possible The instrument stores minimum and maximum values for System Voltage and System Current. Every 40 sec minimum and maximum readings are updated. Optional MODBUS (RS485) Output (With Optical Isolation) The optional ModBus output enables the instrument to transmit all the measured parameters over standard MODBUS (RS485 ). Ethernet Interface (Modbus TCP/IP Protocol) The optional Ethernet Interface output transmit all the measured parameters on Modbus TCP/IP. Also user can configure their instrument via Ethernet Interface. Optional Pulse Output ( or Relay output) The optional pulse output is a potential free, very fast acting relay contact which can be used to drive an external mechanical counter for energy measurement. Optional Analog Outputs ( Outputs 4-0mA or 0 - ma): Analog outputs can be programmed from a list of input parameters. Enclosure Protection for dust and water: conforms to IP 54 (front face) as per IEC6059 Compliance to International Safety standards Compliance to International Safety standard IEC Page of Mckay Rd., unit, Pickering, Ontario W X8 Tel: Fax:
2 Input Voltage: ominal input voltage (AC RMS) System PT primary values Max continuous input voltage Phase eutral 6.5 / / 9.6 / 54V- ine-ine 0 / 0 / 45 / 440 V- 00V to 69kV programmable on site. 0% of rated value Input Current: ominal input current System CT secondary values System CT primary values Max continuous input current Auxiliary Supply: AC Auxiliary Supply 5A AC RMS. A & 5A programmable on site. From A up to 9999A (for or 5 Amp ) 0% of rated value AC /DC Auxiliary Supply DC Auxiliary Supply AC Auxiliary supply frequency range 0 V AC -5% / +0% 0 V AC -5% / +0% 80 VAC-5% / VAC /DC +/- 0%..48 VDC +/- 0% 45 to 66 Hz VA Burden: ominal input voltage burden ominal input current burden Auxillary Supply burden < 0. VA approx. per phase < 0.6 VA approx. per phase < 4 VA approx OR < 5VA approx with 4-0mA analog output option Overload Withstand: Voltage Current x rated value for second, repeated 0 times at 0 second intervals 0x for second, repeated 5 times at 5 min Operating Measuring Ranges Voltage Current Frequency Power Factor 5 0% of rated value 5 0% of rated value Hz 0.5 ag ead Reference conditions for Accuracy: Reference temperature Input waveform Input frequency Auxiliary supply voltage Auxiliary supply frequency Voltage Range C +/- C Sinusoidal (distortion factor 0.005) 50 or 60 Hz ±% Rated Value ±% Rated Value ±% % of ominal Value % of ominal Value for THD. Current Range % of ominal Value % of ominal Value for THD. Power Cos phi / sin phi = for Active / Reactive Power & Energy % of ominal Current & % of ominal Voltage. Power Factor / Phase Angle % of ominal Current & % of ominal Voltage. 900 Mckay Rd., unit, Pickering, Ontario W X8 Tel: Fax: Page of 6
3 Accuracy: Voltage Current Frequency Active Power Re-Active Power Apparent Power Active energy (kwh) Re Active energy (kvarh) Apparent energy (kvah) Accuracy of Analog Output Power Factor Angle Total Harmonic Distortion Accuracy.0 (Standard) ± 0.5% of mid frequency ±.0% of ominal value ±.0% of ominal value ±.0% of ominal value % of Output end value ±% of Unity ±% of range ±% Accuracy 0.5 (on request) ± 0.5% of mid frequency % of Output end value ±% of Unity ±% of range ±% Accuracy 0. (on request) ± 0.5% of mid frequency % of Output end value ±.0% of Unity ±% of range ±% Measurement error is normally much less than the error specified above. Variation due to influence quantity is less than twice the error allowed for reference condition Influence of Variations: Temperature coefficient :(for rated value range of use (0 50 C)) 0.05%/ C for Voltage ( % of rated value) and 0.05%/ C for Current (0... 0% of rated value) Display update rate: Response time to step input sec approx. Applicable Standards: EMC Immunity Safety IP for water & dust Pollution degree: Installation category: High Voltage Test IEC 66 IEC V/m min evel industrial low level IEC , Permanently connected use IEC6059 III. kv AC, 50Hz for minute between all electrical circuits Environmental Operating temperature Storage temperature Relative humidity Warm up time Shock Vibration Enclosure -0 to +55 C -0 to +65 C % non condensing Minimum minute 5g in planes Hz, 0.5mm amplitude IP54 (front face only) Energy Pulsed Output Option : Relay contact O + C Switching Voltage & Current for Relay 40 VDC,5 A Default pulse rate divisor per Wh (up to 600W), per kwh (up to 600kW), Other Pulse rate divisors (applicable only when Energy on RS485 is in W) 0 per 0 Wh (up to 600W), per 0kWh (up to 600kW), 00 per 00Wh (up to 600W), per 00kWh (up to 600kW), 000 per 000Wh (up to 600W), per 000kWh (up to 600kW), Pulse duration 60 ms, 00 ms or 00 ms per MWh (above 600 kwh) per 0MWh (above 600 kwh) per 00MWh (above 600 kwh) per 000MWh (above 600 kwh) ote : Above conditions are also applicable for Reactive and Apparent Energy. 900 Mckay Rd., unit, Pickering, Ontario W X8 Tel: Fax: Page of 6
4 Sr o Parameter System Volts System Current Volts Volts Volts Volts Volts Volts Current Current Current eutral Current Frequency System Active Power Active Power Active Power Active Power System Re-active Power (kvar) Re-active Power (kvar) Re-active Power (kvar) Re-active Power (kvar) System Apparent Power (kva) Apparent Power (kva) Apparent Power (kva) Apparent Power (kva) System Power Factor Power Factor Power Factor Power Factor Phase Angle Phase Angle Phase Angle Import kwh (8 digit resolution) Export kwh (8 digit resolution) Import kvarh (8 digit resolution) Export kvarh (8 digit resolution) kvah (8 digit resolution) THD Volts - THD Volts - THD Volts - THD Volts - THD Volts - THD Volts - THD Current THD Current THD Current THD Voltage Mean THD Current Mean PH 4W PH W PH W Page 4 of Mckay Rd., unit, Pickering, Ontario W X8 Tel: Fax:
5 For Phase 4 Wire Unbalanced oad AUX SUPPY For Phase Wire Unbalanced oad AUX SUPPY For Single Phase AUX SUPPY It is recommended that the wires used for connections to the instrument should have lugs soldered at the end. That is, the connections should be made with ugged wires for secure connections. The Maximum diameter of the lug should be 7.0 mm and maximum thickness.5 mm. Permissible cross section of the connection wires: <= 4.0 mm single wire or.5 mm fine wire. 96 mm 80 mm 9mm+0.8 Display Area 9mm mm Panel Cutout Page 5 of Mckay Rd., unit, Pickering, Ontario W X8 Tel: Fax:
6 Ordering information Accuracy Class Accuracy.0% (Standard) Accuracy 0.5% (on request) Accuracy 0.% (on request) System Type (Connection network) Phase (programmable as 4 Wire or Wire on site) Phase Input Voltage 0V - (6.5V -) 0V - (V -) 45V - (9.6V -) 440V - (54V -) AC Auxiliary Voltage 0 V AC -5% / +0% 0 V AC -5% / +0% 80 VAC-5% / +0 % AC/DC Auxiliary Supply Voltage 00 50V AC/DC +/- 0% V 48V V DC +/- 0 % Communication Interface (Optional): MODBUS (RS485) output Ethernet (Modbus TCP/IP) output Communication Option not used Optional: Pulse Output for energy measurement Pulse output Pulse output Pulse Output option not used Optional: Analog Outputs outputs ( 0 ma ) outputs ( 4 0 ma ) Analog Outputs option not used Ordering Code M H AD D R E Z S D Z Z AD-R-S-, Accuracy 0.%, phase( programmable onsite as 4 wire or Wire), 45- nominal voltage, 00-50V AC/DC Auxiliary supply, with ModBus (RS485),with pulse output and Analog Outputs ( 4-0 ma ). (o need to specify CT secondary as 5 A or A is programmable on site.) Types pulse ( imit) 40 + pulse ( imit) 40 + Rs Analog Output 40 + pulse ( imit) +Rs pulse ( imit)+ Analog Output 40 + pulse ( imit)+ Rs RS485+ Analog Output 40 + RS485+pulse ( imit) )+ Analog Output Ethernet Interface (Modbus TCP/IP) AC Aux (0V, 0V, 80V) VACDC Aux 48 VDC Aux Rishabh Instruments always tries for Improvement and therefore product specifications are subject to change without notice 900 Mckay Rd., unit, Pickering, Ontario W X8 Tel: Fax: Page 6 of 6
RISH Master Digital Multifunction Instrument with onsite pluggable output options. Application : Product Features:
Application : RISH Master 3430 measures important electrical parameters in 3 phase and single phase Network & replaces the multiple analog panel meters. It measures electrical parameters like AC current,
More informationDigital Multifunction Instrument - Rish Master 3440
Application Rish Master 3440 measures important electrical parameters in 3 phase and single phase etwork & replaces the multiple analog panel meters. It measures electrical parameters like AC current,
More informationData Sheet. RISH Master Record %THD
Data Sheet %THD Application : measures important electrical parameters & replaces the multiple analog panel meters. It measures electrical parameters like AC current, Voltage, frequency, active energy
More informationRISH EM 3490 DS Dual Source Energy Meter (With All Display Parameters) RISH EM 3490 DS. Application : Product Features:
(With All Display Parameters) Application : RISH EM 3490 DS measures important electrical parameters of Utility (in normal mode) & Generators (in Power back up) in three phase and single phase Network
More informationALPHA 50 MULTIFUNCTION METER (ALPHA SERIES)
Alpha Series www.sifamtinsley.co.uk Multifunction Meters Transducers & Isolators Temperature Controllers Converters & Recorders Digital Panel Meters Current Transformers Analogue Panel Meters Shunts ALPHA
More informationRISH EM 3490 SS Kilowatt Hour Energy Meter With Rs485 RISH EM 3490 SS. Application : Product Features: Indication: Pulse Indication:
Application : RISH Master 3490 SS is a 96mm x 96mm panel mounted kilowatt hour meter it measures active energy with class 1.0 accuracy having auto-resetting 8 digit seven segment LED counter. The unit
More informationUNIVERSAL MEASURING INSTRUMENTS. TNM 34xx. TNM 3410 / 3420 / 3430 / 3440 Universal measuring instrument 1/49
TNM 3410 / 3420 / 3430 / 3440 Universal measuring instrument True RMS measurement User-friendly programing Four different types for optimal specification RS485 interface For 3- or 4-wire connection Compact
More informationTechnical Data Sheet AMIK 300 / 301
USA SINCE 1936 RELIABILITY BEYOND MEASURE Technical Data Sheet AMIK 300 / 301 LISTED File No. E471457 AMIK AMIK 300 is a compact multifunction instrument with touch screen LCD utility which measures important
More informationApplication: Product Features: On site programmable PT/CT ratios: User selectable CT Secondary 5A/1A. User selectable PT Secondary
Application: Rish Master 3440 measures important electrical parameters in 3 phase and single phase etwor & replaces the multiple analog panel meters. t measures electrical parameters lie AC current,, frequency,
More informationApplication Alpha 20 Measures important electrical parameters in 3 phase 4 Wire and 3 phase 3 Wire Network & replaces the multiple analog panel meters
Technical Data Sheet Alpha 20 Alpha 20 is a compact multifunction instrument which Measures important electrical parameters in 3 phase 4 Wire and 3 phase 3 Wire Network & replaces the multiple analog panel
More informationALPHA 20 MULTIFUNCTION METER (ALPHA SERIES)
Alpha Series www.sifamtinsley.co.uk Multifunction Meters Transducers & Isolators Temperature Controllers Converters & Recorders Digital Panel Meters Current Transformers Analogue Panel Meters Shunts ALPHA
More informationTechnical Data Sheet
Technical Data Sheet parameters in 3 phase 4 Wire and 3 phase 3 Wire Network & replaces the multiple analog panel meters. Special Features Pulse/Limit Switch output (optional) Number of interruption Application
More informationAMIK 200 / 201 Technical Data Sheet
AMIK 200 / 201 Technical Data Sheet AMIK Special Features MODBUS (RS-485) Communication available only on Amik 201 On site Programmable CT/PT Ratios User selectable CT Secondary 1A/5A User selectable PT
More informationRISH Delta Energy / Demand (Multifunction instrument) Data Sheet
ISH Delta Energy / Demand (Multifunction instrument) Data Sheet www.rishabh.co.in Page 1 of 6 Version: D 14 / 03 / 2012 Application: ISH Delta Energy measures important electrical parameters in 3 phase
More informationTechnical Data Sheet. x1000. kwh R Y B
Technical Data Sheet x1000 Von kwh IRev 3600 imp /kwh R Y B is a compact multifunction instrument which is a 96mm x 96mm panel mounted kilowatt hour meter it measures active energy with class 1.0 accuracy
More informationJewell DPM Power / Power Factor Size 96/96 BEST IN CLASS
Application: The Jewell DPM Power 96x96 series measures system active Power (Import/Export), Reactive Power (Import/Export), Apparent Power & Power Factor of Three Phase and Single Phase Network. It has
More informationRISH PQM. Power Quality Monitor. Preliminary Datasheet subject to change without notice. Individual Harmonics measurement upto 56th Harmonics
Power Quality Monitor Individual Harmonics measurement upto 56th Harmonics True representation of Voltage & Current waveforms. Phasor Representation of All 3 phases for system analysis Real Time Clock
More informationAlpha 50. Technical Data Sheet. Special Features
Technical ata Sheet lpha 50 lpha 50 is a compact multifunction instrument with touch screen LC utility which measures important electrical parameters in 3 phase and single phase Network & replaces the
More informationRS Pro ENGLISH. Datasheet
Datasheet Article No: 136-5385 Digital AC Ammeter, 48x96, 1Phase, 1 or 5 Amps AC, Supply 40-300V ac/dc 136-5387 Digital AC Ammeter, 96x96, 1Phase, 1 or 5 Amps AC, Supply 40-300V ac/dc 136-5388 Digital
More informationAMIK Three Phase Digital Panel Meters
AMIK Three Phase Digital Panel Meters USA SICE 1936 ELIAILIT EOD MEASUE Special Features 3 Line 4 Digits ultra bright LED Display (up to 9999) On site Programmable CT/PT atios User selectable CT Secondary
More informationIntegra 1560 and 1580 Digital Transducer Systems
Integra 1560 and 1580 multi function transducers provide high accuracy
More informationRS Pro ENGLISH. Datasheet
Datasheet ENGLISH Article No: 136-5390 Digital AC Ammeter, 48x96, 3Phase, 1 or 5 Amps AC, Supply 40-300V ac/dc 136-5391 Digital AC Ammeter, 96x96, 3Phase, 1 or 5 Amps AC, Supply 40-300V ac/dc 136-5393
More informationJewell DPM EINE BEST IN CLASS
Application: Silent Features: The digital panel meter has been designed Fast & Easy installation on panel with the for industrial applications, which help of external swivel screws. frequently require
More informationRI-F200 Series. Single and Three Phase Multifunction Energy Meter. Telephone : +44 (0) Displayed Parameters
RI-F200 Series Single and Three Phase Multifunction Energy Meter DIN 96 panel mounted -/1A or -/5A current transformer input Single phase or three phase network compatible Programmable voltage and current
More informationProgrammable DPM RISH EINE
Programmable PM RISH EIE ata Sheet www.rishabh.co.in Page 1 of 5 pplication : The digital panel meters RISH Eine PM have been designed for industrial applications, which frequently require precise and
More informationApplication: Salient Features: Products Features:
PHSE PRGRMME RISH PG / PGV pplication: The digital panel meters RISH have been designed for industrial applications, which frequently require precise and onsite adjustment of the display range. It can
More informationTechnical Datasheet. True RMS Digital Protection Relay. Voltage Protection Relay
Technical Datasheet RELAY-1 RISHABH k V RESET True RMS Digital Protection Relay RELAY-2 TEST True RMS Measurement RISH Relay V is used to protect against Over Voltage, Under Voltage, Phase Sequence detection,
More informationENGLISH 3 Phase Multi-function Power Meter 1/5A MID MID
Professionally approved products. Datasheet Stock Number: 144-0527 3 Phase Multi-function Power Meter 1/5A MID 96mm² Panel Mounted Power Meter. MID UK Specifications The 144-0527 is a new generation modern
More informationTechnical Datasheet. True RMS Digital Protection Relay. Line Monitoring Relay
Technical Datasheet RELAY-1 RELAY-2 k V Hz RESET ABH TEST True RMS Measurement True RMS Digital Protection V/Hz is used to protect against Over Voltage, Under Voltage, Phase Unbalance, Phase Sequence detection,
More informationPRELIMINARY DATA SHEET. RI-F300 Series. easywire Single and Three Phase Multifunction Energy Meter (MID Certified) MID
RIF300 Series easywire Single and Three Phase Multifunction Energy Meter (MID Certified) DI 96 panel mounted 330mV Input from easywire CTs (or /1A and /5A current transformer input with TASSCTEWA module)
More informationRelay. Technical Datasheet. True RMS Digital Protection Relay. Line Monitoring Relay
Line Monitoring Technical Datasheet RISH RELAY-1 RELAY-2 RISHABH k V Hz True RMS Digital Protection RISH V/Hz is used to protect against Over Voltage, Under Voltage, Phase Unbalance, Phase Sequence detection,
More informationPRELIMINARY DATA SHEET. RI-F400 Series. easywire Single and Three Phase Multifunction Energy Meter
Telephone : 44 (0) 1245 428500 PRELIMIARY DATA SHEET RIF400 Series easywire Single and Three Phase Multifunction Energy Meter DI 96 panel mounted 330mV Input from easywire CTs (or /1A and /5A current transformer
More informationEASTRON SDM630MCT-RJV / SDM630MCT-RJA User Manual V1.1. Three phase multifunction din rail energy meter
SDM630MCT-RJV-333mV SDM630MCT-RJA-00mA Three phase multifunction din rail energy meter Plug-in solution; labor saving; wiring mistake free Measures kwh KVarh, KW, Kvar, KVA, P, F, PF, Hz, dmd, V, A, THD,etc.
More informationMID. RI-F300 Series. easywire Single and Three Phase Multifunction Energy Meter (MID Certified) MID
Telephone : 44 (0) 1245 428500 RIF300 Series MID easywire Single and Three Phase Multifunction Energy Meter (MID Certified) DI 96 panel mounted 1A Input from easywire CTs Single phase or three phase network
More informationMICROPROCESSOR-BASED METERING EQUIPMENT SECTION 16901C PART 2
PART 1 PART 2 PRODUCTS 2.01 MANUFACTURERS A. Eaton products B.. C.. The listing of specific manufacturers above does not imply acceptance of their products that do not meet the specified ratings, features
More informationOperating Guide October 2006
Operating Guide October 2006 Safety 1 Safety This manual represents your meter as manufactured at the time of publication. It assumes standard software. Special versions of software may be fitted, in which
More informationPRELIMINARY DATA SHEET RI-D140. Three Phase Multifunction DIN Rail Energy Meter (MID Certified) MID
RI-D140 Three Phase Multifunction DIN Rail Energy Meter (MID Certified) Four module DIN rail mounted Energy pulse LED True RMS measurement Cost effective and accurate Modbus communication -/1A or -/5A
More informationEnergy Meters for DIN Rail Mounting Electric energy meter WS0101, WS0102,WS1102 WS0301, WS0302,WS1302
Energy Meters for DIN Rail Mounting Electric energy meter WS0101, WS0102,WS1102 WS0301, WS0302,WS1302 Direct connection up to 65 A (WSx10x) Connection with current transformer (WSx30x) Industrial or meters
More informationRI-D440. Three Phase easywire Multifunction DIN Rail Energy Meter. Telephone : +44 (0) Displayed Parameters
RI-D440 Three Phase easywire Multifunction DIN Rail Energy Meter Four module DIN rail mounted Energy pulse LED 330mV Input from easywire CTs (or -/1A and -/5A current transformer input with TAS-SCTEWA
More informationCentrale de mesure Power Meter PM500 Merlin Gerin
Notice d'installation et d'utilisation Installation and user manual Centrale de mesure Power Meter PM500 Merlin Gerin 059473_D Introduction and description Package contents c one PM500 power meter with
More informationEnergy Management. Type WM14 DIN Advanced version. Product Description 3-phase advanced power analyzer with integrated programming
Energy Management Type WM14 DI version Protection degree (front): IP40 2 digital outputs 16 freely configurable alarms with OR/AD logic linkable with up to 2 digital outputs RS422/485 serial output (MODBUS-RTU),
More informationEnergy Division
Energy Division http://energy.tycoelectronics.com Installation and Operating Manual Integra 1560 and 1580 Digital Metering and Transducer Systems Tyco Electronics UK Limited Crompton Instruments Freebournes
More information12/2 Product overview. 12/3 7KT1 14, 7KT1 53 E-counters. 12/9 7KT1 11, 7KT1 12 digital measuring devices. 12/11 7KT1 0 analog measuring devices
BETA Measuring /2 Product overview /3 7KT1 14, 7KT1 53 E-counters /9 7KT1 11, 7KT1 digital measuring devices /11 7KT1 0 analog measuring devices / 7KT5 8 time and pulse counters /14 7KT5 5, 7KT5 6 time
More informationRISH Master 3440i/3440iDL 0.2S
Operating Manual RISH Master 3440i/3440iDL 0.2S as per IEC62053-22 Touch Screen Digital Multi-Function Meter Installation & Operating Instructions Section Contents 1. Introduction INDEX 2. Measurement
More informationEnergy Management Modular Power Analyzers Type WM2-96
ISE, Inc. - 10100 Royalton Rd. - Cleveland, OH 44133 USA Energy Management Modular Power Analyzers Type WM2-96 - Tel: (440) 237-3200 - Fax: (440) 237-1744 - http://instserv.com Class 1 Modular power analyzer
More informationMT 560/UMT TRANSDUCER & ANALYZER
MT 560/UMT 560 - TRANSDUCER & ANALYZER USE The MT 560/UMT 560 multi transducer and analyzer is used for a permanent analysis of electricity supply quality in compliance with the SIST EN 50160 standard.
More informationEnergy Management. Type WM14-96 Basic Version. Product Description. How to order WM14-96 AV5 3 D PGX. Type Selection. Input specifications.
Energy Management Power Analyzer Type WM-96 Basic Version Optional dual pulse output Alarms (visual only) V, An Optional galvanically insulated measuring inputs Product Description 3-phase power analyzer
More informationContents. Introduction and description Package contents Device identification PM Options... 80
Contents 1 Introduction and description Package contents... 77 Device identification... 77 2 Characteristics PM500... 78 Options... 80 3 Installation Front-panel cut-out... 82 Mounting... 82 4 Connections
More informationMultiCube Multi-Function Electricity Meter. Installation and Operation
MultiCube Multi-Function Electricity Meter Installation and Operation PREFACE MultiCube Operating Guide Revision 1.08 Jan 2007 This manual represents your meter as manufactured at the time of publication.
More informationData Sheet. Earth Leakage Relay RISH ELR/ELR+/ELR VI/ELR VI(NE) A V RISH ELR VI. Record. Digital Protection Relay RESET TEST ENTER
ata Sheet arth eakage Relay RISH R/R+/R VI/R VI() RISH R VI 8.8. 8. 8. V R-1 R-2 igital Protection Relay K RST TST TR nalyze ata Sheet arth eakage Relay RISH R RISH arth eakage Relay is used to etect and
More informationULTRA RAPID POWER QUALITY ANALYZER
ULTRA RAPID POWER QUALITY ANALYZER Ultra rapid (cycle by cycle) advanced electrical network analysis Complete network harmonics analysis, up to 63 rd harmonic High visibility, 5 graphic LCD screen with
More informationN100. example of application Ethernet www/ ftp. Ethernet TCP IP RS X MeaSUreMent of power network parameters.
cat iii Electrical Safety N100 - power network analyzer Measurement of power network parameters in 3 or 4-wire, balanced or unbalanced systems. two-color led display (red, green). Four quadrant energy
More informationConzerv EM6400NG series
Conzerv EM6400NG series Multi-function power & energy meters Technical datasheet PB115131 Introducing EM6400NG, next generation power meters of iconic EM6400 series with innovative Accurate measurements
More informationGIMA Multi-Function Electricity Meter OPERATOR S MANUAL
GIMA Multi-Function Electricity Meter OPERATOR S MANUAL SIMPSON ELECTRIC COMPANY 520 Simpson Avenue Lac du Flambeau, WI 54538 715-588-3311 FAX: 715-588-7930 Printed in U.S.A. Part No. 06-117285, Edition
More informationEnergy Management. Type WM14-DIN Basic Version. How to order WM14-DIN AV5 3 D PGX. Type Selection. Input specifications. CptBSoft
Energy Management Power Analyzer ype WM-DI Basic Version Optional dual pulse output Alarms (visual only) V L, An Optional galvanically insulated measuring inputs Product Description ype Selection Range
More informationINTELLIGENT DIGITAL MULTI POWER METER [DIC-MPM]
Feature Suit for LV/ HV voltage system Compact design with all real-time measurement Consist of basic unit and optional modules 10 years back-up of integrated energy data Large LCD, high brightness High
More informationRISH ELR Earth Leakage Relay Preliminary Datasheet True RMS Measurement Trip relay cum DPM CBCT Open Detection 4 digit 7 segment LED display
RISH R arth eakage Relay Preliminary atasheet Technical atasheet RISH R RISH arth eakage Relay is used to etect and protect instruments from leakage current. RISH R VI RISH R VI RISH R VI is used to protect
More informationOPERATING MANUAL Rish Eine. Size: 48 x 96 Size: 96 x 96
PERTING MNU Rish Eine Size: 48 x 96 Size: 96 x 96 MN-00IM-0637 Rev_B 12/2017 Rish Eine PRGRMMBE PM / C olt Meter (3 Φ) : Eine - 3 C mmeter (3 Φ) : Eine - 3 C olt Meter (1 Φ) : Eine - C mmeter (1 Φ) : Eine
More informationPEM353. Universal measuring device
353 Universal measuring device 353_D00335_00_D_XXEN/06.2018 353 Universal measuring device Product description The digital universal measuring device 353 is used to record and display measured quantities
More informationPowerLogic power-monitoring units. PM700 series power meter. Technical data sheet
PowerLogic power-monitoring units PM700 series power meter Technical data sheet 2009 Functions and characteristics The PowerLogic PM700 series power meter offers all the measurement capabilities required
More informationCROMPTON INSTRUMENTS INTEGRA 1222 DIGITAL METERING SYSTEM
CROMPTON INSTRUMENTS INTEGRA 1222 DIGITAL METERING SYSTEM The Crompton Instruments INTEGRA 1222 digital metering system (dms) from TE Connectivity enables cost effective solution for the measurement and
More informationEnergy Management Energy Analyzer Type EM210 MID
Energy Management Energy Analyzer Type Multi-use housing: for both DIN-rail and panel mounting applications MID annex MI-003 (Measuring Instruments Directive) compliant Class B (kwh) according to EN50470-3
More informationN30P DIGITAL PANEL METER
N30P DIGITAL PANEL METER Features: NEW Measurement of single-phase network parameters: voltage, current, active, reactive and apparent power, cosj, tgj, j, frequency, active, reactive and apparent energy,
More informationnew! nd30 - METER OF POWER NETWORk PARAMETERS EXAMPlE OF APPliCATiON MEASUREMENT AND ViSUAliZATiON OF POWER NETWORk PARAMETERS
new! cat iii Electrical Safety nd30 - METER OF POWER NETWORk PARAMETERS Measurement of power network parameters in 3- or 4-wire balanced and unbalanced systems. Color graphic display: lcd TFT 3,5, 320
More informationCROMPTON INSTRUMENTS INTEGRA 1222 DIGITAL METERING SYSTEM
CROMPTON INSTRUMENTS INTEGRA 1222 DIGITAL METERING SYSTEM The Crompton Instruments INTEGRA 1222 digital metering system (dms) from TE Connectivity enables cost effective solution for the measurement and
More informationTheta 20A / 20V. Technical Data Sheet. Special Features
Technical Data Sheet Theta 20A / 20V Theta 20A / 20V is used to measure and convert AC Voltage or Current input into a load independent DC current or voltage output signal. Special Features Available in
More informationUPM209 1/5A CT, 80A Multifunction three-phase meter
1/5A CT, 80A Multifunction three-phase meter 4 DIN modules compact version Fully bi-directional four quadrants measurements for all energies and powers Main electrical parameters measured and displayed
More informationnd30 EXAMPlE OF APPliCATiON MEASUREMENT AND ViSUAliZATiON OF POWER NETWORk PARAMETERS Ethernet www/ ftp Modbus TCP Modbus RS-485
cat iii Electrical Safety nd30 - METER OF POWER NETWORk PARAMETERS Measurement and recording of 54 power network parameters, including current and voltage harmonics up to 51st, in 1-phase 2-wire or 3-phase
More informationPECA 30E. Analyseur de signaux alternatifs Signal Analyser for Electrical Networks
Analyseur de signaux alternatifs Signal Analyser for Electrical Networks Tout type de réseau : monophasé, triphasé équilibré avec ou sans neutre All types of network: single phase, 3-phase balanced, unbalanced,
More informationInstallation and Operating Instructions
Energy Division Installation and Operating Instructions Quadratic Integra 1530 Digital Metering Systems Our commitment. Your advantage. Contents Page 1 Introduction 4 1.1 Measurement Capabilities 5 1.2
More informationInstallation and Operating Instructions Quadratic Integra 1530 Digital Metering Systems
Installation and Operating Instructions Quadratic Integra 1530 Digital Metering Systems Tyco Electronics UK Limited Crompton Instruments Freebournes Road, Witham, Essex, CM8 3AH, UK Tel: +44 1376 509 509
More informationEnergy Division
Energy Division http://energy.tycoelectronics.com Installation and Operating Manual Integra 1560 and 1580 Digital Metering and Transducer Systems Tyco Electronics UK Limited Crompton Instruments Freebournes
More informationEnergy Management Modular Smart Power Transducer Type SPT-90
Energy Management Modular Smart Power Transducer Type SPT-90 Class 0.5 (current/voltage) 16-bit µp-based modular smart power transducer Measurements of: W, Wavg, VA, VAr, PF, Wh, VAh, VArh, Amax (among
More informationTechnical Datasheet. Delta Power 1000A / 400A AC-DC
Delta 1000A / 400A AC-DC Technical Datasheet Delta 1000A/ 400A AC-DC is specially designed for Measurement of AC-DC POWER and quality parameters. Up to 49th Individual Harmonics Non contact voltage detection.
More informationPower-meters three-phase
ADP3-0C Digital display symbols for all three phases: I - U-PF -Hz -P- Q-S, active energy export/import by IR side set up communication Power-meters three-phase Direct connection 0 A Application The new
More informationIntroduction DIN rail mounted electricity meters
Introduction DIN rail mounted electricity meters Modular DIN Rail Products offer a wide range of functions to be integrated in electrical installations with significant benefits for the user. DIN rail
More informationPMAC770 Multifunction Power Meter. Installation & Operation Manual V2.0 ZHUHAI PILOT TECHNOLOGY CO., LTD.
PMAC770 Multifunction Power Meter Installation & Operation Manual V2.0 ZHUHAI PILOT TECHNOLOGY CO., LTD. Danger and warning! This device can be installed only by professionals. The manufacturer shall not
More informationEnergy Management Three-phase energy meter with output modules Type EM4-DIN
Energy Management Three-phase energy meter with output modules Type EM4-DIN Class 1 (active energy) Class 2 (reactive energy) Three-phase multi-function energy meter Back-lighted LCD display 3 1 / 2 DGT
More informationEnergy Management Energy meters Type EM2-DIN
Energy Management Energy meters Type 6-dgt µp-based indicator Manual scrolling of partial and total energies: kwh, kvarh. TRMS measurement of distorted waves (voltage/current) All configuration functions
More informationEM-72 Electricity Meters for Current Transformers
Product sheet MT8.18 Meter EM72 EM-72 Electricity Meters for Current Transformers EM72 electricty meters have been designed for panel mounting to monitor electricity consumption and the quality of the
More informationMID. Energy Management Energy Analyzer Type EM11 DIN. Product Description. How to order EM11 DIN AV8 1 X O1 PF. Type Selection EM11 DIN
Energy Management Energy Analyzer Type EM11 DIN Other versions available (not certified, option X): see how to order on the next page Product Description Class 1 (kwh) according to EN62053-21 Class B (kwh)
More informationEnergy counting and measurement
Energy counting In the current context of research of energy saving, counting of consumption become unavoidable. Hager offers new residential and tertiary solutions, to better control energy consumption.
More informationME432 Three-phase Power Meter
ME432 Three-phase Power Meter Connectivity advantages MODEL ME432 Support Extra sensor Programmable digital output I/O function 333mV CT Rogowski coil Relay 1*digital output Power 85~265V AC/DC 1 Feature
More informationDM-III Multitest & DM-III Multitest F Power Quality Recorders
DM-III Multitest & DM-III Multitest F Power Quality Recorders CAT 600V TRUE RMSz Amprobe s full-featured Three-Phase Power Quality Recorders provide the essential functions and capabilities required to
More informationMonitoring Electric Network Via Internet
Monitoring Electric Network Via Internet NETWORK ANALYSER let "it" analyse! MPR63 Real time monitoring via internet / intranet Measurement of all electrical parameters Including Harmonics Automatic recording
More informationMeasuring Transducer MT4xx series Programmable AC Current Transducer MT418
Measuring Transducer MT4xx series Programmable AC Current Transducer MT418 o RMS AC current or frequency measurements o Current auto range measurements up to 12 A o Frequency measurement range 16 400 Hz
More informationMID. Energy Management Energy Meter Type EM23 DIN. Product Description. Type Selection. How to order EM23 DIN AV9 3 X O1 PF A EM23 DIN
Energy Management Energy Meter Type EM23 DIN Certified according to MID Directive (option PF only): see how to order below Other version available (not certified, option X): see how to order on the next
More informationOperating Manual RISH EM 1320/30/ _Rev. C - 9/2014
Operating Manual RISH EM 1320/30/40 1 2-60-006-00-00483_Rev. C - 9/2014 2 DIGITAL MULTIFUNCTION INSTRUMENT Programmable Multi-function Energy Meter Installation & Operating Instructions Section Contents
More informationEnergy Management Energy Meter with plug-in Output Modules Type EM4-DIN
Energy Management Energy Meter with plug-in Output Modules Type EM4-DIN Degree of protection (front): IP 40 Front dimensions: 9 DIN modules RS 422/485 Serial port by means of optional module Dual pulse
More informationDIRIS A40 DIRIS A41. Functions. Conformity to standards. Applications. Energy management DIRIS A40. Network analysis
diris_561_b_3_x_cat 1 1. Backlit LCD display. 2. Direct access key for currents and setup wiring correction. 3. Direct access key for voltages and frequency. 4. Direct access key for active, reactive,
More informationPower analyzers and Energy Meters Power Analyzer Type WM14-DIN
Power analyzers and Energy Meters Power Analyzer Type WM14-DIN Optional RS422/485 serial port Alarms (visual only) V LN, An Class 2 (active energy) Class 3 (reactive energy) Accuracy ±0.5 F.S. (current/voltage)
More informationnd30pnet - METER Of POwER NETwORk PARAMETERS with profinet EXAMPlE Of APPlICATION MEASUREMENT ANd VISUAlIZATION Of POwER NETwORk PARAMETERS
nd30pnet tri Measurement of 54 power network parameters, including current and voltage harmonics up to 51st, in 1-phase 2-wire or 3-phase 3 or 4-wire balanced and unbalanced systems. graphical color display:
More informationPower Meter Series PM3200 Functions and characteristics
Functions and characteristics PB108433 This PowerLogic Power meter offers basic to advanced measurement capabilities. With compact size and DIN rail mounting, the PM3200 allows mains and feeders monitoring
More informationEnergy Management. Type WM12-DIN. Product Description. How to order WM12-DIN AV5 3 D X. Type Selection. Input specifications
Energy Management Multifunction indicator Type WM12-DI Accuracy ±0.5 F.S. (current/voltage) Multifunction indicator Display of instantaneous variables: 3x3 digit Variable system and phase measurements:
More informationUniversal-Transducer Multi-E11-MU
Universal-Transducer Multi-E11-MU Safety Informations Observe instructions! The device described in these instructions shall only be installed by a qualified electrician according to both EN 50110-1/-2
More informationEnergy Management Compact Power Transducer Type CPT-DIN Basic version
Energy Management Compact Power ransducer ype CP-DI Basic version RS serial port on request Alarms (only from serial communication port) V, An Class (active energy) Class (reactive energy) Accuracy ±0..S.
More informationDIRIS A40/A41 Multifunction meters - PMD multi-measurement meter - dimensions 96 x 96 mm
Single-circuit metering, measurement & analysis The solution for > Industry > Data centres > Infrastructures DIRIS A4 Function and A4are panel mounted measurement units which ensure the user has access
More informationUMG 96RM Basic Device
Smart Energy & Power Quality Solutions Power Analyser Basic Device Data sheet Dok.-Nr. 2.040.172.0 02/2019 DEVICE VIEWS Front view Rear view Side view Bottom view max. 6 96 91,5 104 91,5 97 42 Cut-out
More informationEnergy Management Energy Meter Type EM21 72R Retro-Fit
Energy Management Energy Meter Type EM21 72R Retro-Fit Including 3 miniature split-core current sensors 10mm (90A), 16mm (150A) and 24mm (250A) diameter holes Class A (kwh) according to EN50470-3 Class
More informationSUPPLY NETWORK ANALYZER CVM-96 SERIES
SUPPLY NETWORK ANALYZER CVM-96 SERIES (Power Demand) INSTRUCTION MANUAL ( M 981 326 / 00B - GB) (c) CIRCUTOR S.A. ----- Supply network analyzer CVM-96 ------ User's manual --- Page No. 1 CVM-96 SUPPLY
More information