Operating Instructions and Parts Manual Model JWS-25X Shaper

Similar documents
Table Parts List Index No. Part No. Description Size Qty

Upper Wheel Assembly Index No. Part No. Description Size Qty

Upper Wheel Assembly Exploded View

Parts List: Stand Assembly

Operating Instructions and Parts Manual 8-inch Parallelogram Jointer Model PJ-882 and PJ-882HH

Note: Parts without part numbers are for reference only and cannot be purchased individually.

Instructions and Parts Manual PM1900 Dust Collector

Parts List Index No. Part No. Description Size Qty

Headstock Assembly 31

Model 2800 Drill Press

Note: Parts without part numbers are for reference only and cannot be purchased individually.

10x15-inch Woodworking Lathe Models JWL-1015, JWL-1015VS

Symptom Possible Cause Correction. Motor will not start Low voltage. Check power line for proper voltage. Open circuit in motor or loose connection.

Operating Instructions and Parts Manual. 10 x 16 Horizontal Band Saw Models J-7020, J-7040

Parts List: Column Assembly

Note: Parts without part numbers are for reference only and cannot be purchased individually.

Replacement Parts. Parts List: Body Assembly

Main Breakdown. Model G0531B/G0566B V2 (G0531B) 80V2-2

Operating Instructions and Parts Manual 15-inch Thickness Planer Models JWP-15DX and JWP-15HH

Operating Instructions and Parts Manual 22-inch Planer Models 201 and 201HH

G0513X2 Main -87- G0513 Series Bandsaws 82V V2 82-6V2 95A V2 82-5V2 82-1V2 82-4V V A

25-200H. 12 Planer / Jointer. with Helical Cutterhead. Parts List.

8" JOINTER Model 60B

READ THIS FIRST. For questions or help with this product contact Tech Support at (570) or

PARTS Stand Breakdown

RYOBI. 10 in. (254 mm) TABLE SAW MODEL NO. BTS15 REPAIR SHEET

11.0 Replacement parts

SECTION 9: PARTS G0513/G0513P/G0513ANV

RYOBI 10 in. (254 mm) TABLE SAW MODEL NO. BT3100 REPAIR SHEET

Operating Instructions and Parts Manual 10-inch Table Saw

Main SECTION 10: PARTS

SECTION 9: PARTS Main

RYOBI 10 IN (254 MM) TABLE SAW MODEL NO. BT REPAIR SHEET

535A. Main Components. Pipe and Bolt Threading Machine. Printed in U.S.A. Ridge Tool Company/Elyria, Ohio, U.S.A.

Parts List: VBS-3612 Band Saw

JWBS-16X WOODWORKING BANDSAW PARTS LIST

PARTS. Model W1701W (For Machines Mfd. Since 1/16) -47- REF PART # DESCRIPTION REF PART # DESCRIPTION

Main Parts. -6- Model G0555LA35 (Mfd. Since 10/17) 30A V

READ THIS FIRST. For questions or help with this product contact Tech Support at (570) or

RYOBI 10 in. TABLE SAW - MODEL NO. BT3000

Repair Parts. Parts List for RIDGID 10 Inch Table Saw Model No. TS Figure 1. RIDGID parts are available on-line at

Disc, Belt, and Combination Disc/Belt Sanders

Parts List: Head Assembly

SECTION 9: PARTS Cabinet & Base

IMPORTANT: Chuck guard MUST be installed before drill chuck!

Parts. Ordering Replacement Parts. Parts List

SECTION 10: PARTS Body

SECTION 9: PARTS Table

Operating Instructions and Parts Manual Step-Pulley Turret Mill Model JVM-836

SPARE PARTS LIST MODEL NO. LB1200F PAGE 1 ITEM PART NO. DESCRIPTION QTY NOTE

EDP# Model 26 MAINTENANCE INSTRUCTIONS AND PARTS LIST. Better By . :;]- ~, Iiii. McMINNVILLE, TENNESSEE D AC

SECTION 9: PARTS G0514X

Parts List for Type 1

G0513X2 Main. G0513 Series Bandsaws (Mfd. Since 07/18) A V2

WOODWORKING BANDSAW M / T 230/50/1 / 400/50/3 PARTS LIST ERSATZTEILLISTE LISTE DE PIECES

SECTION 9: PARTS. Table

SECTION 9: PARTS. Table. Spiral Cutterhead For Model G0452Z Cutterhead For Models G0452/P Model G0452/P/Z (Mfg.

MODEL NO.: MI / 42100

Model W1819/W1820 (Mfg. Since 09/11) PARTS. Body V V PARTS -79-

W /2" Dovetail Machine PARTS. Table PARTS -36-

J-3-D PART NO DATE:

535-Manual. Main Components. Pipe and Bolt Threading Machine. Printed in U.S.A. Ridge Tool Company/Elyria, Ohio, U.S.A.

ST1014 PARTS ST1014 Headstock Breakdown

Horizontal Band Saw. Operating Instructions and Parts Manual. Models EHB-1018VM EHB-1018VMH

EXCERPT FROM THE Jobsite saw OWNERS MANUAL

RYOBI 10 in. (254 mm) COMPOUND MITER SAW MODEL NO. TS1352 REPAIR SHEET

MODEL RA-2500N RADIAL ARM SAW

SECTION 9: PARTS. Table Breakdown REF PART # DESCRIPTION REF PART # DESCRIPTION

SECTION 9: PARTS Main

RYOBI 10 in. TABLE SAW MODEL NO. BTS16 REPAIR SHEET

Main Breakdown. ST " Bandsaw -41-

20" WOODTURNING LATHE Model 3520A

SECTION 9: PARTS G0453Z

SECTION 10: PARTS. Body

Model No. MLT100 TABLE SAW 255MM

Main Parts. -4- Model G0555LANV (Mfg. Since 1/13) 30A V

SECTION 9: PARTS. Headstock A 126A 127A-1 REF PART # DESCRIPTION REF PART # DESCRIPTION

Operating Instructions and Parts Manual Electronic Variable Speed Turret Mill Model JTM-1050EVS

G0604 6" X 56" Jointer -43- Jointer Parts Breakdown

MODEL G0604X 6" EXTREME SERIES PARALLELOGRAM JOINTER MANUAL INSERT

Operating Instructions and Parts Manual 5-ft. Radial Arm Drill Press Models J-1600R, J-1600R-4

SECTION 9: PARTS Jointer Breakdown

READ THIS FIRST. The following changes were recently made to these machines since the owner's manual was printed:

SECTION 11: PARTS Main

SECTION 9: PARTS G7945/G7946

READ THIS FIRST. The following changes were recently made to these machines since the owner's manual was printed:

GEAR HEAD METAL LATHE

JDP-2800VS Drill Press M 230/50/ T.400/50/3 PARTS LIST

SECTION 8: PARTS Main Parts Breakdown

SECTION 10: PARTS G1023RL

Exploded View Saw Base - Model 7060 Semi-Automatic Cut-Off Band Saw

SECTION 9: PARTS. G7947 Stand & Table Breakdown 4V2

G5959Z 12" Left-Tilting Table Saw -37-

Model W1837 (For Machines Mfd. Since 8/18) PARTS. Main PARTS -83-

CATALOG OF REPLACEMENT PARTS

READ THIS FIRST. For questions or help with this product contact Tech Support at (570) or

MODEL G0760 8" X 29" MILL/DRILL w/stand & POWER FEED MANUAL INSERT

Fence Assembly (all models) Parts List Fence Assembly (all models)

BASE, COLUMN, ARM AND TABLE

MODEL W " PLANER PARTS LIST. Phone: On-Line Technical Support:

Transcription:

Operating Instructions and Parts Manual Model JWS-2X Shaper JET 27 New Sanford Road LaVergne, Tennessee 7086 Part No. M-70809 Ph.: 800-27-688 Revision A2 02/20 www.jettools.com Copyright 20 JET

Table Parts and Assembly... JWS2X-0...Insert Ring (Small)... 2... JWS2X-02...Insert Ring (Large)...... JWS2X-0...Table...... JWS2X-0...Starting Pin...... JWS2X-0...Miter Gauge Assembly... -... JWS2X-0-...Miter Gauge Body... -2... JWS2X-0-2...Miter Bar... -... JWS2X-0-...Handle... -... TS-006...Flat Washer...M8... -... TS-062...Pan Head Machine Screw...Mx20... -6... TS-00...Hex Nut...M... -7... JWS2X-0-7...Pointer... -8... JWS2X-0-8...Stop Plate... -9... JWS2X-0-9...Roll Pin... -0... TS-026702...Socket Set Screw.../ -20x/... -2... JWS2X-0-2...Special Washer... -... TS-08F02...Flat Head Machine Screw.../ -20x/8...... JWS2X-TUP... Touch Up Paint, Small Can (not shown)... 2

Fence Parts List... JWSX-20...Knob... 2... PM2700-27...Feather Board... 2... PM2700-2...Bracket... 2... TS-006...Flat Washer...M8...... PM2700-22...Lock Handle... 6... PM2700-2...Carriage Bolt...Mx0... 7... PM2700-2...End Cap... 2 8... JWS2X-208...Fence... 2 9... JWSX-209...Slide... 2 0... JWSX-20...Left Fence Plate...... JWSX-2...Plastic Flat Washer... 2 2... JWSX-22...Leader Screw... 2... TS-202...Socket Set Screw...M6x8...... JWSX-2...Knob...... TS-00...Hex Nut...M6... 6... JWSX-26...Socket Set Screw...M6x0... 7... TS-00...Socket Head Cap Screw...M8x6... 8... TS-20...Socket Set Screw...M6x2... 9... JWSX-29...Shaft... 20... JWSX-220...Adjustment Leader... 2... TS-006...Hex Nut...M8... 22... JWSX-222...Socket Set Screw...M8x0... 2... JWSX-22...Scale... 2... TS-02...Pan Head Machine Screw...Mx0... 2... JWSX-22...Bracket... 26... TS-00...Flat Washer...M... 27... TS-02...Pan Head Machine Screw...Mx6... 2 28... JWSX-228...Fixing Plate... 29... TS-228082...Pan Head Machine Screw...Mx8... 0... JWSX-20...Knob...... PM2700-20...Cutter Guard... 2... JWSX-22...Safety Guard Holder...... TS-00...Flat Washer...M6... 2... JWSX-2...Shaft... 2... TS-009...Flat Washer...M... 2 6... JWSX-26...Dust Chute... 7... JWSX-27...Fence Body... 8... PM2700-20...Flat Washer...M... 9... JWSX-29...Spring... 2 0... JWSX-20...Lock Nut.../2-2... 2... PM2700-26...Carriage Bolt...Mx6... 2... JWSX-22...Wave Washer...... JWSX-2...Flat Washer...... JWS2X-FA...Fence Complete Assembly (Index # - #)...

Fence Assembly Drawing 6

Frame and Motor Parts List... JWS2X-0...Motor Bracket... 2... TS-02700...Socket Set Screw.../6-8x/2...... JWS2X-0...Hex Cap Screw.../2-2x2...... TS-0720...Lock Washer.../2...... TS-060...Hex Nut.../ -20... 6... JWS2X-06...Pointer Leader... 7... TS-068002...Flat Washer.../... 2 8... JWS2X-08...Pointer... 9... JWS2X-09...Lock Handle... 0... TS-06800...Flat Washer.../8...... JWS2X-...Spring... 2... TS-0060...Hex Cap Screw.../8-6x... 2... TS-060...Hex Nut.../8-6...... JWS2X-...Bracket...... TS-00600...Hex Cap Screw.../8-6x/... 2 6... TS-006009...Hex Cap Screw.../8-6x2... 2 7... JWS2X-7...Truss Rod... 8... JWS2X-8...Bushing... 2 9... VB-M2...V-Belt...M2... 20... TS-06072...Hex Nut.../8-8UNF... 2... TS-068008...Flat Washer.../8... 22... JWS2X-22...Motor Pulley... 2... JWS2X-2...Motor...HP, Ph, 20V...... JWS2X-2MF...Motor Fan (not shown)...... JWS2X-2MFC...Motor Fan Cover (not shown)...... JWS2X-2SC...Starting Capacitor (not shown)...00µf, 2V...... JWS2X-2RC...Running Capacitor (not shown)...0µf, 0V... 2... TS-068002...Flat Washer.../8... 2... TS-06009...Nylon Insert Lock Nut.../8-6... 2 26... TS-0602...Hex Nut.../6-8... 27... TS-06800...Flat Washer.../6... 2 28... JWS2X-28...Spring... 29... JWS2X-29...Special Screw.../6-8x-/2... 0... JWS2X-0...Bracket...... TS-000...Hex Cap Screw.../6-8x/2... 2... TS-00...Hex Cap Screw.../6-8x...... JWS2X-...Motor Cable...AWGxCx20cm...... JWS2X-...Strain Relief... 7

Frame and Motor Assembly Drawing 2 2 9 20 2 22 2 2 2 6 7 8 9 0 2 7 8 6 26 27 26 28 29 0 26 2 8

Cabinet and Base Parts and Assembly... JWS2X-0...Cabinet... 2... TS-06800...Flat Washer.../8... 6... TS-00600...Hex Cap Screw.../8-6x... 6... TS-06007...Hex Nut...#0-2...... JWS2X-0...Star Washer...M... 2 6... TS-08002...Round Head Machine Screw...#0-2x/... 7... JWS2X-07...Magnetic Switch...HP, 20V... 8... TS-202...Pan Head Machine Screw...Mx2... 2 9... JWS2X-09...Strain Relief... 0... TS-060...Hex Nut.../ -20... 2... TS-068002...Flat Washer.../... 2 2... JWS2X-2...Window...... TS-020...Button Head Socket Screw.../ -20x/8...... JWS2X-...Switch Cable...AWGxCx7cm...... JWS2X-...Strain Relief... 2 6... TS-002...Hex Nut...M... 2 7... JWS2X-7...Switch Cover... 8... JWS2X-8...Forward/Reverse Switch... 9... JWS2X-9...Screw...Mx00... 2 20... JWS2X-20...Door Hinge Pin... 2 2... JWS2X-2...Door... 22... JWS2X-22...Door Latch... 2... JWS2X-2...Warning Label - Spindle Lock/Release... 2... JWS2X-2...Label - Spindle Height... 2... JWS2X-2...Label - Spindle Height Lock... 26... JWS2X-26...ID Label... 27... JWS2X-27...Scale Label... 28... JWS2X-28...JET Logo... 29... JWS2X-29...Plate... 0... TS-068002...Flat Washer.../... 2... JWS2X-...Power Cable...AWGxCx20cm... 2 9 6 8 7 7 8 9 9 6 2 27 2 2 26 0 2 9 29 0 20 2 22 28 9

Elevator Parts and Assembly... JWS2X-0...Housing... 2... TS-0720...Lock Washer.../2...... JWS2X-0...Hex Cap Screw.../2-2x-/2...... JWS2X-0...E-Clip...ETW-0...... JWS2X-0...Shaft... 6... JWS2X-06...Worm Gear... 7... JWS2X-07...Worm Shaft... 8... JWS2X-08...Shaft Bracket... 9... TS-02070...Socket Head Cap Screw.../ -20x/... 0... TS-026702...Socket Set Screw.../ -20x/... 2... JWS2X-...Bushing... 2... JWS2X-2...O-Ring...P8...... JWS2X-...Cover...... TS-0080...Hex Cap Screw.../6-8x/...... JWS2X-...Clamping Handle... 6... JWS2X-6...Hand Wheel... 7... JWS2X-7...Handle... 8... TS-02700...Socket Set Screw.../6-8x/2... 9... JWS2X-9...Lock Rod... 20... JWS2X-20...Spring... 2... JWS2X-2...Connector... 22... JWS2X-22...Lock Mandrel... 2... TS-2202...Socket Set Screw...Mx8... 2 2... TS-202...Socket Set Screw...M6x8... 2... JWS2X-2...Knob... 2 7 6 8 0 2 9 8 7 6 22 2 2 9 2 20 2 0

Quill Parts and Assembly... JWS2X-60...Quill... 2... JWS2X-602...Spindle Holder...... JWS2X-60...Retaining Ring...STW-0...... TS-02070...Socket Head Cap Screw.../ -20x/8... 6... JWS2X-60...Shaft Top Bearing Cover... 6... BB-6006VV...Ball Bearing...6006-2NK... 7... BB-600VV...Ball Bearing...600-2NK... 8... JWS2X-608...Shaft Lower Bearing Cover... 9... JWS2X-609...Spindle Pulley... 0... JWS2X-60...Flat Washer...... TS-06082...Hex Nut.../ -6UNF...... JWS2X-QA...Quill Assembly (Index # - #)... 2... JWS2X-62...Draw Bar... 7 6 2 8 9 0 2

Spindle Assembly Parts and Assembly... TS-020806...Socket Head Cap Screw.../6-8x... 2... JWS2X-702...Special Washer...... JWS2X-70...Keyed Collar...... JWS2X-70...Collar...I.D. /2 x20mmt...... JWS2X-70...Collar...I.D. /2 xmmt... 6... JWS2X-706...Collar...I.D. /2 x8.mmt... 7... JWS2X-707...Spindle.../2...... 70888...Spindle Assembly (# thru #7, #7).../2... 8... TS-02090...Socket Head Cap Screw.../8-6x... 9... JWS2X-709...Special Washer... 0... JWS2X-70...Keyed Collar...... JWS2X-7...Collar...I.D. / x8mmt... 2... JWS2X-72...Collar...I.D. / x2.8mmt...... JWS2X-7...Collar...I.D. / x20mmt...... JWS2X-7...Collar...I.D. / xmmt...... JWS2X-7...Collar...I.D. / x8.mmt... 6... JWS2X-76...Spindle.../...... 70887...Spindle Assembly (#8 thru #6, #7).../... 7... JWS2X-77...Spindle Nut... 8... JWS2X-78...Wrench... 9... JWS2X-79...Wrench... 8 2 6 7 9 0 2 6 8 9 7 7 /2" Spindle /" Spindle 2

27 New Sanford Road LaVergne, Tennessee 7086 Phone: 800-27-688 www.jettools.com