Contents Section 4 101-10 Rolling Door Profile 110 Wire Mesh 101 Sliding Door Profiles 111 Sliding Door Set 114 Sliding Door Guide 115 Panel Mounting Blocks 103-106 Bifold Door Glide 11-113 Mesh Retainers 107 Door Guide System 116 & Doors Mesh Clamp 108 Rollers 117 Clamp Bar 108 Roller Insert 5 118 Stiffener/Handle 109 Panel Frame Fastener 119 Door Stop 119 Panel Profile 109 Rail Carts 10 99 Parker Hannifin Corporation
Panel Characteristics Panel Selection Guide Recommended Use Opacity Cost Vertical, Horizontal, Shelving, Shelving, Transparent Non- Vertical, Non- No Load or Opaque Low Medium High Panel Type Structural Structural Structural Load Supporting See Through Polycarbonate Wire Mesh TRESPA 1 1 1 Expanded PVC ABS Aluminum Honeycomb 1 Can be used, but not an economical solution. Panel Materials Polycarbonate Wire Mesh TRESPA Expanded PVC ABS Aluminum Honeycomb High-impact resistant polycarbonate panels provide clarity, safety, security and energy savings. Meets every industry standard for general purpose window glazing. Clear or light grey smoked. Wire mesh provides a high level of security and can be used for safety guarding and enclosures. PVC coating provides a smooth, snag-free surface that is extremely rust and corrosion resistant. TRESPA is a solid grade decorative building panel, suitable for horizontal surfaces and vertical panels. Resistant to scratches, corrosives and solvents. Can be drilled and tapped. Light duty colored panel material, primarily for use vertically. Can also be used as light duty shelving material. Not recommended for temperature over 90 C (194 F). Rigid colored panel material used for both vertical and horizontal panels. One side is smooth, and the other side is textured. These panels have a very high strength to weight ratio. The panels have thin aluminum skins on each side with a light weight honeycomb core in the center. These panels can be used in all types of applications from walls to shelves. Can be drilled and tapped. Special Items Special panel materials including color selection of stock material are available. IPS capabilities include custom machining of steel and alumunim panels for use in fixtures, machine bases and assemblies. Contact your local representative or an IPS Engineer to review special requirements. Special item availability includes: Machined Steel and Aluminum Surfaces Perforated Metal Decking Welding Curtains Decorative Glass and Clear Plastic Composites Sound Insulating Wood and Laminate 100 Parker Hannifin Corporation
High-impact resistant polycarbonate panels provide clarity, safety, security and energy savings. Meets every industry standard for general purpose window glazing. Polycarbonate, clear or light smoked UL Listed Maximum Size: 119. x 438.4mm (4' x 8') Polycarbonate * 6mm Polycarbonate Clear m 7.6 kg/m 6-790-6P 6mm Polycarbonate Light Smoked m 7.6 kg/m 6-795-6P *Call for other shades and thicknesses. * For cut-to-size panels, delete the "P" from the end of the part # and specify panel dimensions. A minimum charge of 1/8 of the standard panel size will apply. Wire mesh provides a high level of security and can be used for safety guarding and enclosures. Provides a smooth, snag-free surface that is extremely rust and corrosion resistant. Flat welded steel wire with fusebonded PVC coating. Maximum Size: 119. x 438.4mm ( 4' x 8') * Description Wire Gage Unit Weight Part # 1/ x 1/ Black 16 m.89 kg/m 6-10-5P 1 x 1 Black 1 m 4.17 kg/m 6-10-10P 1 x 1 Yellow 1 m 4.17 kg/m 6-50-10P 1½ x 1½ Black 1 m.98 kg/m 6-10-15P x Black 1 m 1.9 kg/m 6-10-0P Wire Mesh & Doors * For cut-to-size panels, delete the "P" from the end of the part # and specify panel dimensions. A minimum charge of 1/8 of the standard panel size will apply. TRESPA is a solid grade decorative building panel, suitable for horizontal surfaces and vertical panels. Resistant to scratches, corrosives and solvents. Can be cut, drilled and milled. Suitable for doors, shelves and enclosures. Thermosetting resins, homogeneously reinforced with cellulose fibers. Non-toxic, asbestos free, has good fire retarding characteristics. Finished on both sides. Maximum Size: 188.8 x 438.4mm ( 6' x 8') TRESPA Weight Part #* Thickness Unit (kg/m ) Black Grey Blue White 6mm m 8.57 6-410-6P 6-40-6P 6-430-6P 6-480-6P 8mm m 11.4 6-410-8P 6-40-8P 6-430-8P 6-480-8P 10mm m 14.3 6-430-10P 6-480-10P * For cut-to-size panels, delete the "P" from the end of the part # and specify panel dimensions. A minimum charge of 1/8 of the standard panel size will apply. 101 Parker Hannifin Corporation
Expanded PVC Light duty colored panel material, primarily for use vertically. Can also be used as light duty shelving material. Rigid expanded foam polyvinyl chloride (PVC) UL Recognized Maximum Size: 119. x 438.4 mm (4' x 8') * 6mm Expanded PVC Black m 4.19 kg/m 6-510-6P 6mm Expanded PVC Blue m 4.19 kg/m 6-530-6P 6mm Expanded PVC - White m 4.19 kg/m 6-580-6P * For cut-to-size panels, delete the "P" from the end of the part # and specify panel dimensions. A minimum charge of 1/8 of the standard panel size will apply. ABS Rigid colored panel material used for both vertical and horizontal panels. One side is smooth, and the other side is textured. Acrylonitrile butadiene styrene Maximum Size: 119. x 438.4 mm (4' x 8') * 6mm ABS Black m 6.85 kg/m 6-610-6P 6mm ABS White m 6.85 kg/m 6-680-6P * For cut-to-size panels, delete the "P" from the end of the part # and specify panel dimensions. A minimum charge of 1/8 of the standard panel size will apply. Aluminum Honeycomb These panels have a very high strength to weight ratio. The panels have thin aluminum skins on each side with a light weight honeycomb core in the center. These panels can be used in all types of applications from walls to shelves. Skins - 6061-T6 Anodized Aluminum Maximum Size: 119. x 438.4 mm (4' x 8') except 6-810-6P: 106 x 45mm (3.96' x 7.96') * 6mm Aluminum Honeycomb Black m 7.8 kg/m 6-810-6P 6mm Aluminum Honeycomb Clear m 7.8 kg/m 6-80-6P 6mm Aluminum Honeycomb Blue m 7.8 kg/m 6-830-6P 6mm Aluminum Honeycomb - White m 7.8 kg/m 6-880-6P * For cut-to-size panels, delete the "P" from the end of the part # and specify panel dimensions. A minimum charge of 1/8 of the standard panel size will apply. Black tyle 6-810-6 has a finished dimension of 47.5" x 95.5"(106 x 45mm). 10 Parker Hannifin Corporation
Panel Mounting 1 Multiblock PA and Uniblock PA Versatile block for mounting panels and screens. The block locks into the T-slot at a 90 position with an offset design to suit various panel thicknesses. Movable captive nut provides larger alignment range for locating through holes in panels. 4 5 3 Glass Filled Nylon, Black Square Steel Nut, M6 or M4 Spacing Table 1 Floating square nut secured within the multiblock by flat spring provides for alignment flexibility Insertion of Multiblock PA in the T-slot 3-4 Recommended gaps for assembling Multiblocks PA 5 Distance between Multiblock center and floating nut Profile Max Load Dimensions (mm) Series N (lbs) A B C 40 50 (56) 80 400-600 5 30, 8 10 (47) 70 400-500.8 0 100 () 60 300-400 45 50 (56) 80 400-600 9 & Doors Multiblock PA 40 1 3 4 5 1-4 Various options for flush panel mounting of Multiblock PA 40 5 Determining the length of M6 screw on Multiblock PA 40 3.5 10.5 8 4 15 Series 40 Multiblock PA 40 with M6 Nut Each 13 g -100 0 6. 0 5-100 103 Parker Hannifin Corporation
Panel Mounting Multiblock PA 30/8 1 3 4 4 14.4 0 8 5 6 7 8 1-4 Mounting options for Multiblock PA 30/8 on 8 series profiles 5-6 Mounting options for Multiblock PA 30/8 on 30 series profiles -103 3.5 11.0 4 6. Series 8/30 Multiblock PA 30/8 with M6 Nut Each 10 g -103 All Universal Multiblock PA with M6 Nut Each 10 g -114 40 Uniblock 1/4-0* Each 6 g 5-100 * 6mm panels only, no offset. Uniblock PA 0 6 5 1.5 4 16-107 14 Mounting options for Uniblock PA 0 4 16 5 13 Profile Series 8/30 Uniblock PA 0 with M4 Nut Each 3 g -107-107Z1 104 Parker Hannifin Corporation
Panel Mounting Multiblock PA with 1/4 Turn Receptacle 1 0 10.5 3.5 3 1 Panel mounted to Multiblock PA 40 with 1/4 Turn Receptacle Panel mounted directly to profile with receptacle pressed into profile 3 Panel mounted to 19" Rack Angle with 1/4 Turn Receptacle for light or dust tight applications 5-10 & Doors For easy, quick removable mounting of panels to 40 Series profiles. Multiblock locks into T-Slot at 90 O position. The stud will not fall out of properly machined holes when panel is removed. Glass Filled Nylon (Black) Receptacle and stud: Steel, galvanized Order Stud Separately 1. 10-10Z Profile Series 40 Multiblock PA 40 with ¼ Turn Rec. Each 16 g -10 ¼ Turn Receptacle Each 4 g -10Z ¼ Turn Socket Stud (6mm panels) Each 4 g -090.8 8.5-090 105 Parker Hannifin Corporation
Panel Mounting Clamp Multiblock 1 E F 3 1 Mounting position for panels up to 10mm thick to clamp Multiblock 40. Mounting position for panels up to 5mm thick Multiblock rotated180 3 Edge distance between panel element and profile D -11-113 C B A Mounting element for attaching panels to 40, 30 and 8 Series profiles without using additional fasteners or machining the panel. Insert multiblock into T-Slot at any location and lock in position by turning 90 O clockwise. Slide locking clip to secure the panel. To remove panel, loosen locing clip with a flat screwdriver. Glass Filled Nylon (Black) For -11: Max load in direction F per drawings above is 50N (56lbs); in opposite direction: 50N (11lbs) Max Panel Thicknesses -11: 10mm (3/8") -113: 8mm (5/16") Dimensions (mm) Weight Series A B C D E F (g) Part # 40 0 5 5 5 11 6 10-11 30/8 0 5 7 7-113 Multiblock Al 5.4 3x 3.0 5.4 31.0 D 4x 6.5 6.5 15.0 3.0 31.8-105 1.0 A 15.9 17.5 B A 11.0 C 5.4 15.9-105 7.5 15.9 31.8-106 -108-106 -108 Mounting element for panels and accessories. Various mounting dimensions are obtained by rotating the block. Order hardware separately. Dimensions (mm) Al, clear anodized Max. load at 90 angle to T-slot: -105: 500 N (11 lbs) -106: 750 N (169 lbs) -108: 1000 N (5 lbs) Series A B C D Weight Part # 40, 30, 8 M5 18 g -105 M6 17.5 5.4 6.3 58 g -106 M8.5 30 8.3 60 g -108 106 Parker Hannifin Corporation
Wire Mesh Retainers Back Plate included but not shown on dimension drawings. Deluxe H G E D Deluxe retainers are used to securely fasten wire mesh within the T-slot of 40 Series profiles. This accessory requires screws and T-nuts to mount to profile, order these items separately. Aluminum, Black 5/16-18 BHCS included to secure back plate to retainer. J K L A Back Plate included but not shown on dimension drawings. F C B 0-0 Recommended Fastening Hardware (Order Separately) Screws M8 x 16 BHCS [4-116-8] T-Nuts M8 T-Nut [0-058] Dimensions (in) Style A B C D E F G H I J K L (g) Part # Single 53.1 50.0 3.0 4.9 13. 10.9 8.1 1.4 7.9 5.1 8.1 8.1 70 0-0 Double 4.9 50.0 3.0 4.9 13. 10.9 8.1 1.4 7.9 5.1 8.1 8.1 140 0-03 Wt. H J K L I A G F D E B C & Doors 0-03 Economy Economical solution for securely fastening wire mesh to 40 Series profiles. Back Plate included but not shown on dimension drawings. Steel, Zinc Plated BHCS included to secure back plate to retainer. 1 1.5 64 Ø7 Unit Weight Part # Economy Wire Mesh Retainer M6 Each 59 g -110 Economy Wire Mesh Retainer 1/4-0 Each 59g -111 6-111 107 Parker Hannifin Corporation
Panel Profiles Mesh Clamp Profile Flat Bar 1.7 x 3. M6x6SetScrew [5-506-6F] Captures wire mesh panels up to 5.5mm thick. Excellent for constructing safety guards. Installs onto 40, 30 and 8 series profiles without additional fasteners. A B Length=A-1mm Length = B - 33mm 15.8 00mm ±mm TYP 0-5.5 Aluminum, Clear Anodized Weight: 0.53 kg/m Tapped for M6 every 00mm (±mm) Includes clamp strip and M6x6 flat point screws * Wire Mesh Size: A - 6mm and B-6mm 1-010 18 8 Standard fastener position is critical to avoid interference with the mesh clamp. Description Unit Part # Mesh Clamp Profile Cut off max. 4m 1-010 *Saw Cut Needed for Cut to Length 19-001 Clamp Bar 0 15 0 5 Attaches 40 Series profiles to base plates or other parts. Must be used in pairs. Not recommended for linear applications. Aluminum, Clear Anodized Weight: 1.4 kg/m M8 BHCS Cut to Length and Service as required. 1-105 Description Unit Part # Clamp Bar Profile Cut off max. m 1-105 *Saw Cut Needed for Cut to Length 19-001 108 Parker Hannifin Corporation
Panel Profiles Designed as a combination handle and stiffener for sliding panel doors (1/4" thick material). snap into the profile slot and may be secured by an adhesive or a fastener. Aluminum, Clear AnodizedWeight: 0.93kg/m Stiffener/Handle [1-011] Stiffener/Handle Profile 18. 6. 18.7.4 Description Unit Part # Panel Stiffener/Handle Cut off max. 3m 1-011 *Saw Cut Needed for Cut to Length 19-001 11.1 1-011 Extrusion for mounting 34mm (1.34") thick insulation panels onto 40 Series profiles. Extrusion can be serviced to mount on profile using T-Slot nuts or with double sided tape. Insulated Panel Panel Extrusion [1-018] Fastener Set [0-058 and 4-1-8] Panel Extrusion 40 38.1 34 & Doors Aluminum, Clear Anodized Weight: 0.48kg/m 40 Series Profile 15.6 Description Unit Part # Panel Extrusion 40 Cut off max. 6m 1-018 *Saw Cut Needed for Cut to Length 19-001 7.8.5 1-018 109 Parker Hannifin Corporation
Panel Profiles Rolling Door Guide Handle Fastening See Detail 4 40 Series Profile Guide Insert [1-067] 4.5 66 60 3X10 1 1 1-0 6 6mm (1/4") Panel Vinyl Panel Gasket [1-106] T-Slot 8 B C A T-Slot 10 8.0 1.5 50 5 1 Rolling Door Guide Profile [1-0] Door Framed by 3x18 Bi-Slot [1-03] Roller Insert [1-068] 3.5 1-067 M6x16 Set Screws 10 5 Connection Method 1 41 Standard Fastening Set [0-00] OR Leave 5mm Clearance for Std. Fastener 4 Flat Plate Connector [0-08z1] Drill & Tap M5 x 10mm Deep On Center M5x1BHCS [4-31-5L] * Recommend fastener every 50mm 0 Mill Key Back 5mm mm Gap M6 Econ. T-Nut [0-190] Opt. Spring [4-719-6] 5 18 40 3 Connection Method Length of vertical door member: B = A - 11mm For 1/4" Panel with panel gasket [1-106]: C (panel height) = B + 16mm For 5/16" Panel without gasket: C (panel height) = B + 3mm 3-4 Connection methods for assembling the door guide to 40 Series profiles. 5 mm Gap 1-068 1-41 M6x14SHCS [4-314-6] 14 10 Ø5.4 3.5 4.5 9.9 10 Designed for large doors with removable door panels for maintenance. s include case packers, material handling equipment, packaging installations and access panels for large machine enclosures. Profile Aluminum, Clear Anodized Weight: 1.78 kg/m Guide Insert UHMW (white) Roller Insert Roller: Delrin (black) Housing: Aluminum, Clear Anodized Pin: Steel Description Unit Part # Rolling Door Guide Profile Cut off max. 4m 1-0 Guide Profile UHMW Cut off max. 3.1m 1-41 *Saw Cut Needed for Cut to Length 19-001 Guide Insert Set Each 1-067 Roller Insert Set Each 1-068 Roller Set includes (1) housing, (1) roller, () M6X14 SCHS screws and () offset T-slot nuts with compression spring. Guide Set includes (1) 50mm guide insert, () M6X16 setscrews. 110 Parker Hannifin Corporation
Panel Profiles 8 Series Sliding Door Guide Sliding Door Guide Upper A B 17 Any Panel (up to 1/4") TYP. 7 TYP. 9 Sliding Door Guide Lower 1-01 Stiffener/Handle [1-011] R 7 TYP. TYP. Removable 40 Series 30/8 Series B = A - 15mm B = A - 15mm 10 Non-removable B = A - 10mm B = A - 11mm *Designed for panels up to 1/4 (6.4mm) 9 1-013 & Doors These profiles create light duty sliding panels for windows and access ports for safety guards, enclosures or partitions. Installation onto 40, 30 or 8 series profiles do not require fasteners and will snap into the T-slot. The lower guides are designed to reduce friction. The upper guides facilitate liftout removal of the panel without disassembly. Tamper proof mounting may also be provided. Aluminum, Clear Anodized Three panel tracks Panel width up to 6.4mm Weight: 1-01, 1-014 0.45kg/m 1-013, 1-015 0.50kg/m 7 16.9 1.6 Description Unit Part # 40 Series Profile Sliding Door Guide 40 Upper Cut off max. 3m 1-01 Profile Sliding Door Guide 40 Lower Cut off max. 3m 1-013 8/30 Series Profile Sliding Door Guide 30/8 Upper Cut off max. 3m 1-014 Profile Sliding Door Guide 30/8 Lower Cut off max. 3m 1-015 *Saw Cut Needed for Cut to Length 19-001 R 8 8 7 TYP. 1-014 1.5 TYP. 10 1-015 111 Parker Hannifin Corporation
Bifold Doors Bifold Door Glides 5/16-18 x 3/4" FHCS Spacer Door Glide Washer Tap 5/16-18 x 3/4" deep A C D 40 Series B E 1/4-0 x 3/4" FHCS Spacer Door Glide 1-080 1-081 F Washer Tap 1/4-0 x 3/4" deep 30/8 Series Bifold doors are used in very confined areas. Door glides allow rotational and sliding motion at the top and bottom of a vertical member within a permitted bifold door frame. Two glides (one top and one bottom) are required per door. Door Glide UHMW Spacer Steel, Zinc Plated Washer Steel, Zinc Plated Note: Hardware and tap are SAE Standard Ships complete with glides, screws, spacers and washers. Dimensions (mm) Part # A B C D E F 1-080 36.6 3 9.4 5.3 8 Ø15. thru c sink Ø19 x 90 1-081 5.4 3 9.4 5.3 8 Ø11.1 thru c sink Ø14 x 90 Use the following chart to help select the correct part for your application. Frame Series Door Series Glide Part # 40 & 80 Series 40 Series 1-081 40 & 80 Series 30/8 Series 1-080 8 Series 8 Series 1-080 11 Parker Hannifin Corporation
Bifold Doors Design Examples Examples consider the hinges to be medium duty plastic hinges (page 131). Other hinges can be used and dimensions would only be slightly affected. Bifold Door Glides Design Example for 40 Series Bifold Door To determine the width of the narrow door, subtract the sum of the door gaps and 48mm from the frame's inside width dimension, then divide by. Example: 660 (1.7 + 1.7 + 9.5 + 48) 660 60 = 600 600 = 300 7 660 1.7 1.7 9.5 To determine the width of the wide door, add 48mm to the width of the narrow door. Example: 300 + 48 = 348 76 748 838 To determine vertical door dimension, subtract clearance required for guides and washers (14mm) from the vertical opening dimension. & Doors Example: 76 14 = 748 7 300 348 Design Example for 8 Series Bifold Door To determine the width of the narrow door, subtract the sum of the door gaps and 36mm from the frame's inside width dimension, then divide by. Example: 660 (4.5 + 4.5 + 6.4 + 36) 660 5 = 608 608 = 304 7 660 4.5 4.5 6.4 To determine the width of the wide door, add 36mm to the width of the narrow door. 76 748 81.8 Example: 304 + 36 = 340 To determine vertical door dimension, subtract clearance required for guides and washers (14mm) from the vertical opening dimension. Example: 76 14 = 748 7 304 340 * When using 8 Series for the doors and 40 Series for the frame, use the design example for 8 Series. 113 Parker Hannifin Corporation
Doors Sliding Door Set Packaged system for creating a sliding door with 40 series profiles. The set consists of the necessary supports, rollers and roller housing to mount the movable sliding panel to an assembly. Hardware will vary based on design and must be ordered separately. Supports: Aluminum, Clear Anodized, Fully machined for assembly Rollers: Roller PA 40 (1-069) Roller Holders Sliding-Door Set Set 36 g 3-065 114 Parker Hannifin Corporation
Doors See page 46 for application details Sliding Door Guide 3-054 & Doors 1 1 Two sliding doors in T-slot of a 40 series profile Four sliding doors in T-slots of an 80x40 profile 3 4 3 Mounting dimensions within a frame 4 Slide piece positioning in the T-slot 5 Guide pieces function as stops when two doors slide in the same T-slot 5 Allows a door constructed of 3x18 Bi- Slot profile to slide in the T-Slot of a 40 Series profile. This guide attaches to the door frame through a 7mm mounting hole. Two Guides with opposite offsets are available, allowing panels to be mounted in a single T-Slot. Polyoxymethylene, Black Spring/Spring Bolt are Steel Set includes four guides two of each offset. Door Sizing size door 15mm smaller than frame opening. Door gap will be 7mm at bottom and 8mm at top. Sliding-Door Guides for 3x18 Bi-Slot Set 36 g 3-054 115 Parker Hannifin Corporation
Doors Door Guide System Sliding Door Shock Absorber [31-037Z3A] Reversing Unit [31-1, 31-14 or 31-16] Timing Belt [31-05-1] Locking Screw [4-695] Conduit Cap [15-805] Door Guide [3-055] Wireway Conduit [15-081] & [15-08] Closure Plate Set 80x80 [1-155] 4 M6 Locking Screw [4-695] Conduit Cap [15-807] 1 Counterweight Assembly Wireway Conduit [15-08] & [15-161] Closure Plate Set 80x160 [1-156] 1 Assembly of the Door Guide System Sliding Door with two counterweights 3 Assembly of the Door Guide 4-5 Counterweight Assemblies 80x80 and 160x80 3 5 M6 Door guides are used to build doors that operate between two vertical 40 series profiles. The weight of the door may be counter-balanced by one or two counterweights that are connected to the door space with door guides, timing belt 5T10 and reversing unit 40. The size of the counterweight is determined by the weight of the door. The operation of the door may be motorized by attachment of a suitable drive to one of the reversing units. Door Guides Four guides are usually attached to the door, and slide in the inside slots of the vertical 40 series profiles. Two guides are attached to each of the counterweights, and slide in the outer slots of the vertical frame profiles. Counterweights Duct wall support and wall profiles are used to build the counterweight. A closure plate attached with four M6 Profile-to-Wall Fasteners forms the bottom of the counterweight. Heavy metal scrap may be used as filler material. Suitable conduit cap is used to close the top of the counterweight. Closure Plate St, black epoxy finish Complete with fastening set Door Guide: Polyoxymethylen, black Complete with the following: Steel plate insert, M6x5 BHCS, M6 T-slot nut St, three M6x5 SHCS, and three M6 hex nuts 3-055 Door Guide 1 set 0.1 kg 3-055 Closure Plate 80x80 1 set 0.48 kg 1-155 Closure Plate 160x80 1 set 0.96 kg 1-156 116 Parker Hannifin Corporation
Doors Roller 40 1 3 4 6 6 39 8 18 4 1-069 5 6 1-4 and details for sliding door with Roller PA 40 5 Servicing for Roller PA mounted in 40x40 Heavy profile 6 Mounting the Roller PA 40 for a sliding panel application 7 Max. load F = 150 N 8 Dimensions of offset on 40 series profile 7 8 & Doors Versatile ball bearing roller which can be mounted in the T-slot. Roller has asymmetric design for various clearance dimensions such as on sliding doors and panels. Glass-filled nylon, black complete with two deep groove ball bearings with dust covers and two M6 flat washers Max. load 150 N (34 lbs) Leave 9mm offset between profiles. Roller PA 40 1 pc 3 g 1-069 Shoulder Bolt M5x6x5 1 pc 800.17 Roller 0 Versatile ball bearing roller which can be mounted in the 0 Series T-Slot. Roller has asymmetric design for various clearance dimensions such as on sliding doors and panels. Polyoxymethylen, Black Includes Bearing Hub and Washer Max Load: 50N (11lbs) 5.1 15 19.5 Roller 0 Set 40 g 1-066 5 11 1-066 117 Parker Hannifin Corporation
Doors Roller Insert 5 1 FOR M6 SHCS 5.4 40 56 1-065 6 14 5.4 1 Rolling door constructed with 8 series profiles guided on top with UHMW strip 1-410 Two bypassing covers constructed with 8 series profiles rolling on a pair 30x60 profiles. 3 Clearance dimensions 4 Required machining for mounting roller insert to a 40, 30, or 8 series profile. 7.8 18.6 1-065Z1 5 Versatile roller mounted in a housing. Can be attached to any 40, 30 or 8 Series profile with proper machining. Step roller is available without housing for sliding panel applications. Roller: Delrin, Black Housing: Aluminum, Clear Anodized Pin: Stainless, Steel Hardware not included Recommended Hardware Profile Series Screws (Order ) T-Nut (Order ) 40 M6x14 SHCS [4-314-6] M6 Offset Economy [0-190] 30 M6x1 SHCS [4-31-6] M6 Offset Economy [0-190] 0 M6x10 SHCS [4-310-6] M6 Offset Economy [0-190] Roller Insert 5 Each 3 g 1-065 Step Roller 5 Each 8 g 1-065Z1 Machining to mount internal to profile Each 19-10 118 Parker Hannifin Corporation
Miscellaneous Panel Frame Fastener Frame element with four sets of Panel Frame Fasteners Provides for quick and easy attachment of framed panels to a post. Fastener halves may be secured with a screw from the front or the rear. Designed for use with 40 series profiles but can be used on 30 and 8 series if alignment pins are removed. Glass-filled nylon, black Set includes: two frame fastener halves, one M6 washer and one M6x16 SHCS Order all hardware separately Fastening Set 3-050: two M8x5 BHCS, two rib spring washers and two M-8 T-slot nuts 3-001 & Doors Panel Frame Fastener 1 set 37 g 3-001 Fast. Set for Panel Frame/Door Stop 1 set 40 g 3-050 Door stop for swinging doors. Attaches with screws anywhere along the T-slot. Door Stop Glass-filled nylon, black Set includes two door bumpers Order all hardware separately Fastening Set 3-050: two M8x5 BHCS, two rib spring washers and two M8 T-slot nuts Door Stop 1 set 30 g 3-048 Fast. Set for Panel Frame/Door Stop 1 set 40 g 3-050 3-048 119 Parker Hannifin Corporation
Doors Rail Carts 0 M5x6x50 Shoulder Bolt M6 Washer Rail Cart, 4 Roller [3-01] 1mm Gap Teflon Tubing 3mm Spacer 80 16 3 M5 Tap [3-0] Kit Includes Rail Cart and Hardware 3 3 Order Hardware Separately 14-48 8 40 M4 T-Nut Zn [0-034] Nylon Spacer M4x0 SHCS [4-30-4] 1 76. 17 5.4 TYP. 5.4 6 9 M6 6.5 1.7 Required clearance C and required gap B depend on location of pivot point A. For 40 Series Profiles: B = A + 0 - A C = A + 0-0 For A 7 B = 7 - A 4 1 Assembling the 4-Roller Rail Cart to a door frame. Apply Loctite to M6 screw to prevent loosening. Guide along lower section for sliding door using nylon spacer (8mm long, O.D. 8mm) Calculations for Bi-fold sliding doors 3 Sliding Door and Bi-fold sliding door assemblies 4 8-Roller Rail Cart assembly in 80x40 Rail profile 3-00 Designed for use in 80x40 Rail Profile part # 14-48 (See Linear Section). Rail carts used for hanging and sliding doors and other hanging components such moving material on workstations. Housing: Aluminum, Clear Anodized Wheel: Delrin, needle roller bearings Washer: Nylon Hardware included with 3-0: Bolt, washer, Teflon tubing and 3mm spacer. FOR M8 SHCS 30 3-0 38 54 15.9 Description Unit Weight Max LoadN (lbs) Part # 8-Roller Cart Set 0.0 kg 440 (100) 3-00 4-Roller Cart Each 45 g 0 (50) 3-01 4-Roller Cart with Fastening Set Set 64 g 0 (50) 3-0 Profile Unit Weight Part # Profile 80x40 Rail Transport Cut off 6m max. 4.19 kg/m 14-48 *saw cut needed for cut to length 19-00 10 Parker Hannifin Corporation