/ Prima Patch Fittings & Prima Series
/ Prima In the field of architectural fittings for glass doors, provides high quality and total design flexibility for ease of installation, safety, security and functionality. Our standard fittings are designed to suit mm glass panels. 8-10-12mm glass panel Use different thickness of gasket 15 & 19mm glass panel Use extended screws & pivots. Pivot point from side panel is either 55mm or 65mm. Door Weight Calculation To estimate glass panel weight, the basic formula to use will be: WIDTH (m) x HEIGHT (m) x 2.5 factor x glass thickness (mm) = Y kgs Therefore, for a glass panel of 12mm thickness, 1.0m width and 2.7m height, the glass panel weight will be 1.0 x 2.7 x 2.5 x 12 = 81kgs. Fittings are designed to carry maximum weight up to 120kg but for door width exceeding 1100mm, it is practical to use door rails. Torque for Fixing Screws Apply torque on each screw in progressive order until all screws reach the same required torque almost together. Cap Screw M6 (4mm allen key) 10 Nmm Cap Screw M6 (5mm allen key) 15 Nmm Cap Screw M8 (5mm allen key) 20 Nmm Typical Assemblies PD 30 PD 63 PD 40 GK 20 PD 41 PD 40 GK 30 PD 20 PD 20 PL 50 PL 50 PD 20 PD 20 PL 50 PL 36 GK 36 US 50 GK 50 3 3 3 4 PD 10 PL 36 PD 10 PL 50 PL 50 PD 10 PD 10 PL 50 TD 800 10 PD 15 TD 800 PD 15
PD 10 Bottom Patch PD 20 Top Patch
PD 15 Floor Pivot Pivot bearing for 300kg (max. load) PD 15 P Floor Pivot Pivot bearing for light and narrow door of 60kg (max. load) -to bottom patch - to floor
PD 22 Top Patch OC700 PD 30 Overpanel Patch Option: - with M8 threaded road & plug to concrete wall side - with back plate fixing to wall frame Back Plate M8 threaded rod
PD 30 V OverpanelPatch with variable pivot point of minimum 100mm 185 minimum PD 40 Overpanel & Side Panel Patch
PD 41 Overpanel & Side Panel Patch with fin fitting for left and right side PD 41 (RH) PD 41 (LH) 110 PD 50 Double Transome Patch with double strike box for centre hung doors
PD 51 Double Transome Patch with fin fitting for back to back doors 110 PD 63 Overpanel & side Panel Patch 52 106
PD 70 D/S Overpanel Patch with double stop insert 30 PD 70 P/P Centre Patch
PD 71 Ovepanel Connector Patch with fin fitting PD 71 D/S Overpanel Connector Patch with double stop inserts & fin fitting
PD 80 Connector Patch Connector for 4 panels PD 81 Connector Patch Connector for 4 panels with fin fitting 110
PD 82 Connector Patch (back plate excluded) Glass to Glass clamping side connector Back Plate M8 threaded rod
GK 20 Double Overpanel Strike Patch Line dimension to be advised Ø 10 43 132 16 132 GK20 GK 30 Single Overpanel Strike Patch Option: - with M8 threaded road & plug to concrete wall side - with back plate fixing to wall frame Back Plate M8 threaded rod
GK 36 Centre Strike Patch To receive PL 36 Ø 13 184 42 GK 40 Overpanel & Side Panel Strike Patch To receive PL50
GK 41 Overpanel & Side Panel Strike Patch To receive PL 50 GK 41 (RH) GK 41 (LH) 110 GK 41S Overpanel & Side Panel Strike Patch with fin fitting & stop insert for left & right side GK 41S (RH) GK 41S (LH) 110
GK 50 Strike Patch To receive US50 Centre Lock US 50 Centre Lock Patch 43 52 20
Prima PL 34 Lock Patch with 20mm throw; can be installed at top, side & bottom of sliding & swing door panel Ø13 32 Ø 55 32 PL 34 SL Single Cylinder Lock Patch with 20mm throw; can be installed at top, side & bottom of sliding & swing door panel No Glass Notch Required
Prima PL 34 DL Double Cylinder Lock Patch with 20mm throw; can be installed at top, side & bottom of sliding & swing door panel No Glass Notch Required GK 34 Strike Patch To receive PL 34
GK 34S Strike Patch With stop insert to receive PL34 Prima
PL 36 Centre / Corner Lock Patch Centre Lock Corner Lock Ø 13 42 184 PL 50 Lock Patch
Prima PM 10 Bottom Patch Ø 55 PM 20 Top Patch Ø 55
Prima PM 30 Transome Patch PM 40 Transome Corner Patch
/ Prima Patch Fittings are available in different finishes on an ex-stock basis, such as: Polished Stainless Steel Satin Stainless Steel Physical Vapour Deposit Other finishes available are anodised finish, epoxy powder coating and titanium gold plated. Please specify glass thickness at time of order if other than 12mm. Sales/Showroom: 76 Playfair Road, #05-02 LHK 2, Singapore 367996 Tel: (65) 6282 1096 Fax: (65) 6282 9296 Head Office (Retail): No.2 Kallang Pudding Road #01-02 Mactech Industrial Building Singapore 349307 Tel: (65) 6746 5185 Fax: (65) 6746 8749 Email: enquiry@preference.com.sg Website: www.preference.com.sg