Tried-and-tested quality. Rugged single and full-extension drawer slides in tried-and-tested quality for top requirements. www.grass.at, info@grass.eu
Roller slides Tried-and-tested quality and functionality. Technical Drawer slides System The traditional standard programme for domestic and commercial furniture. Standard drawer slides for a wide variety of furniture applications. Grass offers a wide variety of drawer slides and covers a large part of traditional furniture applications. Single and full-extension drawer slides available for different load capacities with excellent technical details guarantee the highest quality standards. Drawer slides from Grass are known for their ultrasilent operation, minimum sagging, excellent side stability and a bottom corner clearance. Single and full-extension drawers for load capacities from 30 to 100 kg For lengths of 250 1000 mm Bottom mounting, self-closing Parallel closing, minimum gap Minimum deflection due to precision axle bearing Bottom corner clearance for efficient use of drawer bottom 3
Roller slides Product overview. Page Single-extension slide, 30 kg Bottom mounting Plastic rollers 6 System full-extension slide, 50 kg Bottom mounting Plastic rollers Single-extension slide with tilt bracket, 30 kg Bottom mounting Plastic rollers 8 10 Drawer slides Heavy-load Single-extension slide, 100 kg Bottom mounting Steel ball bearing Galvanized 12 Technical Technical 14 5
Roller slides Single-extension slide, 30 kg Single-extension slide with nylon rollers, 30 kg, installation width 12.5 mm, bottom mounting Parallel closing Secure closing, minimum gap widths Bottom edge clearance Clearance of screw heads in cabinet slide Double stop Secure stop in open state possible Single roller slides, 30 kg Nominal length Item No. white RAL 9010 Item No. cream RAL 9001 brown RAL 040 250-1702.250.2 1700.250.11 1702.250.11 1702.250.3 300-1702.300.2 1700.300.11 1702.300.11 1702.300.3 350-1702.350.2 1700.350.11 1702.350.11 1702.350.3 400-1702.400.2 1700.400.11 1702.400.11 1702.400.3 450-1702.450.2 1700.450.11 1702.450.11 1702.450.3 500-1702.500.2 1700.500.11 1702.500.11 1702.500.3 550-1702.550.2 1700.550.11 1702.550.11 1702.550.3 600-1802.600.2 1800.600.11 - - 650 1800.650.2-1800.650.11 - - 700 1800.700.2-1800.700.11 - - 750 1800.750.2 - - - - 800 1800.800.2-1800.800.11 - - PU 1/20 PU 25 PU 1/20 PU 25 PU 25 PU 1/20 = PU 25 = 25 Single-extension slides, left and right-handed, loose in the box Euro screw, nickel-plated Chipboard screw, nickel-plated Item No./Ø 6.3 x 10.5 mm Item No./Ø 6.3 x 14 mm 191 192 PU 1000 PU 1000 = 1000 pieces Item No./Ø 3.5 x 15 mm 198 PU 1000 PU 1000 = 1000 pieces Ø 6.3 Ø 3.5 Length Ø 7.1 15 Ø 7 PU = Packing Unit 6
Extension loss 1: Describes the extension loss when slide not stopped. Extension loss 2: Describes the extension loss when slide stopped. Mounting positions Nominal length extension loss 1 extension loss 2 r250 90 73 300 90 73 350 90 73 400 90 73 450 103 86 500 103 86 550 118 101 600 118 101 650 128 111 700 138 121 750 153 136 800 153 136 Mounting positions for cabinet slides System Drawer slides Top 12.5 +2 12.5 min.9 Front edge of cabinet min.15 Bottom Drawer width = LW -25 Inside cabinet width (LW) 6.5 11 4 33 96 64 250 300 350 Technical 400 64 450 500 Mounting positions for front part of cabinet slide 550 Front edge of cabinet 37 9 12 224 600 650 700 14 750 For Ø 3.5 35 2 Wood screws 198 and Euro screws 191/192 128 128 128 128 96 128 37 800 2 All dimensions in millimetres. 7
Roller slides full-extension slide, 50 kg full-extension slide with nylon rollers, 50 kg, installation width 12.5 mm, bottom mounting 30 mm over-extension Easy access Central rail can be adjusted Secure parallel closing Removal protection Secure connection of drawer to cabinet Bottom edge clearance Close fit of drawer slide at bottom full-extension roller slides, 50 kg Nominal length Item No. white RAL 9010 Item No. cream RAL 9001 brown RAL 8014 250 5300.250.2 5300.250.11 5300.250.3 300 5300.300.2 5300.300.11 5300.300.3 350 5300.350.2 5300.350.11 5300.350.3 400 5300.400.2 5300.400.11 5300.400.3 450 5300.450.2 5300.450.11 5300.450.3 500 5300.500.2 5300.500.11 5300.500.3 550 5300.550.2 5300.550.11 5300.550.3 600 5300.600.2 5300.600.11 5300.600.3 650 5300.650.2 5300.650.11-700 5300.700.2 5300.700.11-750 5300.750.2 5300.750.11-800 5300.800.2 5300.800.11 - PU 1/10 PU 1/10 PU 1/10 PU 1/10 = Euro screw, nickel-plated Chipboard screw, nickel-plated Item No./Ø 6.3 x 10.5 mm Item No./Ø 6.3 x 14 mm 191 192 PU 1000 PU 1000 = 1000 pieces Item No./Ø 3.5 x 15 mm 198 PU 1000 PU 1000 = 1000 pieces Ø 6.3 Ø 3.5 Length Ø 7.1 15 Ø 7 PU = Packing Unit 8
Over-extension Your essential benefit: more access When fitted the drawer can be over-extended by 30 mm. This avoids interference with the drawer front above when opened to full access. Over extension Nominal length over-extension 250 10 300 350 15 400 800 30 System Mounting positions Mounting positions for cabinet slides Drawer slides Top 12.5 +1 12.5 +1 min. 48 min. 12 Bottom Drawer width = LW -25 6.5 5 43 60 96 64 Front edge of cabinet 96 128 37 250 300 350 Technical Inside cabinet width (LW) 128 400 64 450 128 500 550 Mounting positions for front part of cabinet slide 224 600 Front edge of cabinet 37 9 6 650 700 6 750 For Ø 3.5 35 2 Wood screws 198 and Euro screws191/192 128 256 224 128 37 800 2 All dimensions in millimetres. 9
Roller Slides Single-extension with tilt bracket Single-extension slide with tilt bracket, nylon rollers, 30 kg, installation width 12.5 mm, bottom mounting Front can be tilted Access to trays from front Parallel closing Secure closing Bottom edge clearance Close fit of drawer slide at bottom Double stop Secure stop in open state possible Single-extension roller slides with tilt bracket, 30 kg Nominal length Item No. white RAL 9010 450 1754.450.2 500 1754.500.2 550 1754.550.2 PU 25 PU 25 = 25 Single-extension slides, left and right-handed, loose in the box Euro screw, nickel-plated Chipboard screw, nickel-plated Item No./Ø 6.3 x 10.5 mm Item No./Ø 6.3 x 14 mm 191 192 PU 1000 PU 1000 = 1000 pieces Item No./Ø 3.5 x 15 mm 198 PU 1000 PU 1000 = 1000 pieces Ø 6.3 Ø 3.5 Length Ø 7.1 15 Ø 7 Application 1 2 3 4 PU = Packing Unit 10
Extension loss 1: Describes the extension loss when slide not stopped. Extension loss 2: Describes the extension loss when slide stopped. Nominal length extension loss 1 extension loss 2 450 128 111 500 138 121 550 153 136 System Mounting positions min. 22 12.5 +2 12.5 +2 11 33 15 5 Drawer slides 6.5 4 11 Cabinet width = LW - 25 Inside cabinet width (LW) 12.5 Mounting positions for front part of cabinet slide Technical Front edge of cabinet 37 11 1 Mounting positions for cabinet slides Front edge of cabinet 64 450 500 550 128 128 96 128 37 All dimensions in millimetres. 11
Drawer slides Heavy load Single-extension slide, 100 kg Single-extension slide with steel ball bearings, 100 kg, installation width 17.5 mm, bottom mounting Secure drawer front positions in closed condition Double stop Secure stop in open state possible System stop for interior drawers Ball bearing - Single-extension slide, 100 kg Nominal length Item No. Item No. 400-4000.400.5 450-4000.450.5 500-4000.500.5 550-4000.550.5 600 4000.600.5-700 4000.700.5-800 4000.800.5-900 4000.900.5-1000 4000.1000.5 - PU 1/6 PU 1/10 PU 1/6 = PU 1/10 = Euro screw, nickel-plated Item No./Ø 6.3 x 10.5 mm Item No./Ø 6.3 x 14 mm 191 192 PU 1000 PU 1000 PU 1000 = 1000 pieces Ø 6.3 Length Ø 7.1 PU = Packing Unit 12
Extension loss 1: Describes the extension loss when slide not stopped. Extension loss 2: Describes the extension loss when slide stopped. Nominal length extension loss 1 extension loss 2 r400 105 90 450 105 90 500 105 90 550 105 90 600 115 100 700 135 120 800 135 120 900 150 135 1000 150 135 System Mounting positions Top 17 +0.5 17 +0.5 Mounting positions for front part of cabinet slide Drawer slides min. 9 23 min. 20 Bottem Cabinet width = LW -35 8 Inside cabinet width (LW) 12.5 For Euro srews 191/192 12.5 9 Technical Mounting positions for cabinet slides 160 160 192 192 160 128 160 160 160 160 192 160 192 219.5 192 224 255.5 224 256 259.5 288 288 359.5 224 352 400 450 500 550 600 700 800 900 1000 All dimensions in millimetres. 13
Technical for roller slides. Extension loss with Single-extension slides Small minimum gap Carefully engineered parallel-closing range allows minimal gaps between drawer fronts. EL 1 EL 2 Single-extension slides have two kinds of extension losses (EL) Minimum gap for 19 mm drawer front = 0.5 mm) EL 1: is the extension loss when not stopped. EL 2: is the extension loss when stopped. 5 4 3 2 1 0 0 10 20 30 40 50 60 70 Over-extension at full-extension slides System-compatible Tolerance compensation 30 mm System bore hole mm system (vertical) Your essential benefit: more access. When fitted, the drawer can be over-extended by 30 mm. This avoids interference with the drawer front above when open for full access. Single and full-extension slides are vertically interchangeable in system. Fixing of cabinet slides: The data is based on reference chipboard in accordance with DIN 68858, MDF and hardwood boards. If other types of woods and thicknesses are used, please consider the proper screw types as well as numbers of screws used. 14
Twist-lock For functioning self-closing slide Check mounting positions Wrong position For safe carrying capacity of 50 kg For convenient drawer insertion and removal Correct position for inserting drawer Twist-lock Insertion of centre rail is not possible. System Insertion of centre rail Centre rails to be inclined for insertion into cabinet slides at rear position. Correct position Wrong position Technical Drawer slides Insertion, securing, and removal of drawer Insertion of drawer Extend intermediate slide fully to the open stop. Insert the drawer as horizontally as possible over the roller on both sides simultaneously. Malfunction of twist-lock Any malfunction of the centre rail is automatically corrected by fully extending the drawer. Mounting of safety lock: One pair of black safety locks is supplied with the cabinet slide. Separate safety locks and insert (A) and push in (B) into the opening of the centre rail with the drawer fully open - pay attention to the direction of the arrow! Removing the drawer Pull the drawer out to the stop, lift safety lock at the centre (C) and disengage. Move twist-lock into the insertion position. This makes it possible to insert the centre rail and remove it if required. Safety lock The safety lock prevents accidental removal of the drawer and is a major safety feature. 15
Grass GmbH Furniture fittings Grass Platz 1 6973 Höchst Austria Tel. +43 / 5578 / 701-0 Fax +43 / 5578 / 701-59 www.grass.at, info@grass.at Item No. F147100241000 1/09 2.000 (ENG) GRASS Promotion Subject to changes, no liability for printing errors