Hörmann Up-and-Over Garage Doors and Side Doors

10-Year Guarantee r s l o u c o R A L H ö l e i n r m a n n g a r a g e d o o r s - a v a n o w i l a b Hörmann Up-and-Over Garage Doors and Side Doors Europe's Best-Selling Garage Doors

Hörmann offers you one major advantage: You are buying the quality of the original Quality and safety, aesthetics and convenience. Advanced technology based on 50 years' know-how in building garage doors and operators. A wide variety of door designs matching the architecture of your home. Only the original can offer you all this - the original Hörmann up-and-over garage door. Certified quality to DIN ISO 9001 and with 10-year works guarantee With Hörmann the door and operator are always TÜV-tested as a safety unit. 10-Year Guarantee Up-and-Over Garage Doors Sectional Garage Doors 2 Some of the garage doors shown in this brochure have special features and therefore do not always represent the standard version. Copyright. No part of this brochure may be reproduced without our prior approval. Changes reserved.

... and everything is a perfect match The garage door matches the architecture pages 4-13 The side door matches the garage door pages 15-18 The operator matches the garage door pages 22, 23 Out with the old - in with the new. Quick and clean all on the same day! Thinking of renovating? Then consult your Hörmann specialist. See pages 20, 21. Practical accessories pages 14, 19-21 NEW Many beautiful colours, pages 15-16 Attractive handles, page 19 Highest safety Standard to EN 12604 see pages 24, 25 3

Contemporary classics in vertically and horizontally ribbed steel Steel ribbed infills for single and double garages have stood the test of time and therefore always prove a keen favourite. The design shown above gains its strong visual impact from the horizontally arranged steel ribs in conjunction with a vertical centre profile and side profiles. Garage door and side door as one unit No space for a garage side door? Then this is the ideal solution: a garage door with integral wicket pass door in matching appearance. For underground and collective garages we also offer steel garage doors with ventilation slots as required by the relevant regulations. In such cases we recommend the use of an electric operator with key switch or digital coder in conjunction with an interior button for opening and closing. 4

Why not bring colour into play? Garage doors don't always have to be white. With the new coloured garage doors from Hörmann we offer you a wide range of interesting options (see also pages 15-16). 5

6 Harmonizing garage and side doors This example impressively shows how the design of the doors and side doors match when vertical ribbings and horizontal profiles align. This design advantage can also be offered for many other styles (see programme overview page 15-18).

The variations: Ribbed steel in chevron design and with vertical or horizontal profiles The double garage door shown on the left perfectly echoes the contours of the gable. The chevron design and the subdivision using vertical profiles gives this garage door a uniquely attractive appearance. In the double garage door shown below, a horizontal profile has been used to subdivide the height, cleverly carrying through the design of the windows. Colours create a friendly environment Thanks to the new variety of colours, you can co-ordinate the colour of your garage door to match the facade, gable, oriel, entrance door and windows, as this example impressively shows (see also pages 15-16). 7

Raised and smooth panels: These steel infills are bang up to date From these highly attractive infills select the design that best complements the architecture of your home. The arrangement of the panels is precisely matched to the respective door size of your single or double garage. The panelling of the side door and garage door is perfectly aligned. Smooth panel infill This panel infill has a particularly elegant appearance and is especially complementary to houses featuring contemporary architecture and clean distinct lines, as our example here impressively shows. Raised panel infills An effective combination of squares and rectangles creates attractive aesthetics - one of our four different panel infills. Panelled sections on the garage door and side door are perfectly aligned. A choice of three different design glazings to enhance the appearance of your garage door at the same time as providing an additional source of light. See page 14. 8

Use colours to place accents Here the garage door becomes an eye-catching feature where the use of the colour sets it apart from the rest (see also pages 15-16). 9

Hörmann solid timber infills: In exemplary quality Every Hörmann solid timber door is assembled from carefully selected, superior quality timber profiles. Before assembly the timber profiles are spray-impregnated to protect them against insect and fungal attack. Subsequent site finishing is all that is needed. Information is provided in the Fitting Instructions. All the timber infills shown on this page feature Nordic Pine which is by nature a lightcoloured wood. By applying a pigmented wood preservative you an easily achieve the colour of your choice. We offer the timber boarding arranged vertically or horizontally, as well as in a chevron or rhombus design. Door leaf overlapping the frame All Hörmann timber doors are fully clad, i.e. the door leaf overlaps the frame. This shows the natural beauty of the timber to full advantage. In addition, we offer the timber designs 923 and 927 in a choice of five new infills without frame surround (see pages 17-18). 10

All doors with timber infill are supplied foil-wrapped to protect them during transit and site storage. Glazing as a design element Depending on how the timber doors are divided, the shape of the glazing is integrated into the design. Just how good this can look is demonstrated by this example featuring rhombus-style glazing. NEW 11

Design your very own timber door: You cut the timber to size. The frame and struts are pre-drilled at 30 mm spacings. This pre-drilling of the 905 design is a major benefit. It makes for easy fitting every time, regardless of whether the timber boarding is arranged vertically, horizontally, in a chevron/rhombus or individual design. Once fitted, it is essential that you treat your door with a proprietary wood preservative to protect it against UV rays as well as fungal and insect attack. If you would like to give your door a coloured appearance, please use a pigmented wood preservative. If you choose a chevron design, your garage door could look like this. Matching, for example, a timber-clad house gable and the entrance door. The 905 design gives you full creative freedom. It goes without say that the 905 design is also available for double garages. But please note the maximum infill weight (page 26). 12

This door construction offers you two design options: Infill overlapping the frame, whereby the frame and bottom section are entirely concealed. Timber infill within the frame with visible bottom section to protect against spray water. This is the solid basis Extremely sturdy frame construction through considerably reinforced struts. Fully welded! Fully galvanised, door leaf frame additionally powder-coated. Rust doesn't stand a chance! Both frame and struts pre-drilled at 30 mm spacings. Illustrated fitting instructions for the boarding featuring four suggested designs 13

Let your garage see the light of day A door with glazing saves you having to build an extra window into the garage. This is a particularly sensible solution if you also intend using your garage as a workshop. Style 4: 283 x 203 mm Style 5: 283 x 203 mm Glazing for steel infills Available in three versions. With or without surfacemounted decorative latticework for the styles 902, 941, 957, 972, 982. Size: 283 x 203 mm, material: polyurethane rigid foam. Colour: White or Terra- Brown and on request matching the RAL colour of the garage door. Glazing: 3 mm acrylic panes, with a choice of clear or crystal-structured glass. NEW Glazing for timber infills Available in four versions. Figures 21 and 22 for designs 922, 925, 926, 927 and 931. Figures 23 and 24 for the designs 923, 924, 930, 933, 934, 935 and 937. Style 6: 283 x 203 mm Material: Timber. Glazing: 3 mm acrylic panes, with a choice of clear or crystal-structured glass. Style 21: 375 x 375 mm Style 22: 235 x 235 mm Style 23: 277 x 199 mm Style 24: 199 x 277 mm 14

Terra brown Ochre Brown Moss Green Window Grey Pigeon Blue Traffic White (RAL 8028) (RAL 8001) (RAL 6005) (RAL 7040) (RAL 5014) (RAL 9016) All colours based on RAL. White or in one of the new colours: Which of these steel infills best reflects the style of your home? 902 Vertically ribbed steel* also 2-leaf 914 Ribbed steel fully ventilated* 957 Horizontally ribbed steel with centre profile and side profiles* also 2-leaf 970 Panelled steel* also 2-leaf 976 Panelled steel* also 2-leaf 978 Panelled steel 15

Every colour with a high-grade powder coating The galvanized door leaves are protected against corrosion and the adverse effects of the environment right into the cut edges. They are available as standard in Traffic White and on request in 5 further colours as well as in many colours of the RAL colour chart. Pearl-effect, luminous and metallic colours are excluded. 941 Ribbed steel with surface-mounted rail* also 2-leaf 905 open-for-infill* also 2-leaf 972 Panelled steel* also 2-leaf 974 Panelled steel* also 2-leaf 982 Smooth panelled steel* also 2-leaf 990 Ribbed steel, chevron design* also 2-leaf 16

Or do you prefer the natural look of solid timber infills? 923 Nordic Pine 934 Nordic Pine* 924 Nordic Pine 933 Nordic Pine 926 Nordic Pine ** 931 Nordic Pine ** * ** We also supply these designs as door type DF 98 for double garages. If ordering a garage door with side door, please submit exact technical deta precisely matched. We can also supply designs 902, 905, 914 and 934 with an integral wicket p Wicket doors open outwards only. 17

Selected profiled timber boarding in softline design All the profiled timbers (121 x 14 mm) used for our solid timber infills are in the new softline design, making for an aesthetically-pleasing door leaf. Door leaf frame and steel frame are attractively timber clad. 935 Hemlock 937 Nordic Pine ** 930 Nordic Pine 925 Nordic Pine ** 927 Nordic Pine ** 922 Nordic Pine ** ils to ensure that both infills can be ass door. Exclusive version with door leaf overlapping the frame Good-value standard designs without frame surround 18

Beautiful handles add value to your door These new handles give you an even better grip. Also set against coloured garage doors and side doors they make a very elegant impression. Black plastic standard Black plastic standard for side doors Cast aluminium new silver finish Cast aluminium stainless steel finish Cast aluminium brass finish Cast aluminium white (RAL 9016) The garage doors and side doors are equipped as standard with a black plastic handle. We supply the side doors as standard with a lever handle set and on request also with a lever-knob handle set, of course, in the new versions as shown. NEW Cast aluminium rustic style Cast aluminium bronze finish 19

Out with the old, in with the new. Quick and clean all on the same day! "We're delighted that everything has gone so well. The new garage door blends in much better with the style of the house and the old garage door was disposed of at the same time. Our only regret is that we didn't invest in an electric operator years ago." Practical accessories: a job worth doing is worth doing well. Stainless steel threshold rail Where garages are exposed to the weather, it is advisable to use a stainless steel weather bar to ensure that the bottom of the door stays rust-free for many years to come. Rubber floor seal for an unbroken flat floor line For garages with an unbroken flat floor line, the flexible, weather-proof rubber seal helps keep out driving rain, hail and snow. Fascia panels and renovation panels In the case if renovations, the structural opening can sometimes be higher and wider than the more favourablypriced standard-sized garage door. Hörmann solves this problem by offering aestheticallypleasing top and side fascia panels to close the gaps. If masonry is damaged on removing the old garage door, a renovation panel (see photo) provides a neat solution without the need for any further plastering. (See also page 26). 20

Extras for improved acoustic and thermal insulation Where acoustic insulation is called for, we recommend our special Dämmtec coating which is applied to the inside of the door leaf at the factory. We can supply thermal insulation boards which come in a pack and are simply clipped to the inside of the garage door, or you can have insulation boards prefitted at the factory. Einbruchhemmende 3-Punkt-Verriegelung As a DIY retrofit kit for all non power-driven up-and-over doors. It provides added security to prevent your garage door from being forced open. 21

Hörmann SupraMatic The intelligent operator for your garage door There are no tedious adjustments to be made. On first-time opening and closing, the intelligent electronics already tune themselves to your garage door. The patented toothed belt guides the door super smoothly and super quietly into the end-of-travel position. It requires no greasing and no oiling, so there's nothing to drip onto your car roof. Just as it should be. Why would you want to settle for less? Over 1 billion security codes "Soft" start and "soft" stop Patented door security kit Bright reflector lamp Top-grade stainless steel cover Entirely maintenance-free Simple to operate Energy-saving The hand transmitters are pre-programmed at the factory with one of more than 1 billion possible codes, thus offering you maximum security! The hand transmitters feature two buttons as standard. This means that in addition to opening the garage door, you can, for instance, also switch on the outdoor lighting. Further practical accessories: key switches, digital coder, interior buttons, key switch post. Obtain our specialist brochure for further details. On request they are also available with four buttons and in mini-size as well as in a 2-button micro version. 22

2-Year Guarantee Door and operator are TÜV-tested as a safety unit. Don't be satisfied with less. No trap risk That's intelligent safety In the event of an obstruction, the automatic cut-out halts the closing door and raises it approx. 30 cm, so nothing and no-one can get trapped. The automatic cut-out is selftesting as well as self-adjusting, if necessary during every door cycle. No-one else offers this level of security Every time the door closes, the door security kit engages in the boom's limit stop. An effective way of making sure that your garage door cannot be forced open (a Hörmann patent). The door security kit is a mechanical device, so it is always fully functional, even during a power failure. Using the universal fitting the operator is always easy to fit Because Hörmann makes both: the door and the operator. That's what makes subsequent fitting so easy because the door is already pre-drilled for the standard universal fitting. 23

Safer, quieter and in line with the new standard EN 12604. The quality of the original is seen in the details N80 N80 DF98 Safe fingertrap protection and side trap guard By flexible weather seals on door leaf and frame as well as PVC covers for the lifting arms. 2 liftingarm covers are delivered ready-to-fit on site. Extremely sturdy door construction A wide special box section frame (for double garages with block frame) and door leaf reinforcement through two additional horizontal steel profiles. Always a good grip From the outside via the compact Hörmann quality round section handle, from the inside via "T" handle and pull rope. The cylinder lock can be integrated into the building's master locking system. If the house is entered directly from the garage, the garage door can also be locked from the inside. Buffer stop prevents door leaf from sliding back Once fully opened, the door is gently cushioned and always brought to a safe, reliable stop. Security latching Two-point latching as standard via adjustable latches automatically engaging in each bottom corner (N 80). On request also with additional latch at the top to provide three-point latching (retrofit kit). N80 DF98 24

10-Year Guarantee N80 DF98 Extremely smooth and particularly quiet door action Everything is perfectly matched: the four-point suspension, the precision track guidance, the smooth-running (with DF 98 doors ball bearing) plastic rollers, the adjustable spring units and the plastic profiles down the sides. (With double garages at the top as well as the bottom as foot trap protection). Threshold rail To protect the bottom of the garage door against driving rain, dust and leaves. With an unbroken flat floor line, the threshold rail can be easily removed. On request also in stainless steel. N80 DF98 N80 DF98 Easy fitting N 80 up-and-over door: pre-assembled ready to fit. DF 98 up-and-over door for double garages: in separate units (door leaf, frame, accessories). Both doors complete with: fixing materials including progressively adjustable universal anchors and illustrated fitting instructions. Multiple tension springs with finger trap protection Optimally dimensioned, adjustable spring units guarantee reliable permanent function and a smooth action in every door position. The minimum distance between the spring windings effectively eliminates the risk of trapped fingers. 25

Standard and special sizes Maximum size range (depending on door design) Height 2750 2625 2500 2375 2250 2125 2000 1875 BR 2000 2250 2500 2750 3000 3250 3500 3750 4000 4250 Ordering size (BR) in mm 4500 4750 5000 = Size range door type N 80 = Size range door type DF 98 = Door type DF 98 style 905 up to 14 kg/m 2 = Door type DF 98 style 905 up to 12 kg/m 2 = Door type DF 98 style 905 up to 10 kg/m 2 Width Open-for-infill doors (style 905) Please note the maximum weight for site infills, which, depending on the door size, ranges between 6 and 10 kg/m 2. Depending on their size, DF 98 garage doors are also available with an infill weight of up to 16 kg/m 2 (exception: doors within the shaded area above). Consult your Hörmann specialist who will be able to tell you the exact infill weight per m 2 for your particular door. Doors with renovation panel The recommended structural width may not be exceeded. In the case of the recommended structural height, this may be as much as 10 mm less (with stepped floor). For garage doors with a finished flat floor line (frame at FFL), 30 mm should be added to the recommended structural height. Standard sizes Dimensions in mm Door Ordering size Overall frame size Clear passage Fitting behind the opening Fitting in the opening type (BR) (RAM) dimension* Recommended Opening size Recommended Opening size Structural dim. structural dim. structural dim. structural dim. structural dim. Width Height Width Height Width Height Width Height Width Height N 80 2250 1920 2355 1990 2110 1780 2240 (2210-2335) 1915 (1890-1950) 2375 1970 2250 2000 2355 2070 2110 1860 2240 (2210-2335) 1995 (1970-2030) 2375 2050 2250 2075 2355 2145 2110 1935 2240 (2210-2335) 2070 (2045-2105) 2375 2125 2250 2125 2355 2195 2110 1985 2240 (2210-2335) 2120 (2095-2155) 2375 2175 2375 1920 2480 1990 2235 1780 2365 (2335-2460) 1915 (1890-1950) 2500 1970 2375 2000 2480 2070 2235 1860 2365 (2335-2460) 1995 (1970-2030) 2500 2050 2375 2075 2480 2145 2235 1935 2365 (2335-2460) 2070 (2045-2105) 2500 2125 2375 2125 2480 2195 2235 1985 2365 (2335-2460) 2120 (2095-2155) 2500 2175 2375 2250 2480 2320 2235 2110 2365 (2335-2460) 2245 (2220-2280) 2500 2300 2375 2375 2480 2445 2235 2235 2365 (2335-2460) 2370 (2345-2405) 2500 2425 2500 1920 2605 1990 2360 1780 2490 (2460-2585) 1915 (1890-1950) 2625 1970 2500 2000 2605 2070 2360 1860 2490 (2460-2585) 1995 (1970-2030) 2625 2050 2500 2075 2605 2145 2360 1935 2490 (2460-2585) 2070 (2045-2105) 2625 2125 2500 2125 2605 2195 2360 1985 2490 (2460-2585) 2120 (2095-2155) 2625 2175 2500 2250 2605 2320 2360 2110 2490 (2460-2585) 2245 (2220-2280) 2625 2300 2500 2375 2605 2445 2360 2235 2490 (2460-2585) 2370 (2345-2405) 2625 2425 2500 2500 2605 2570 2360 2360 2490 (2460-2585) 2495 (2470-2530) 2625 2550 2500 2750 2605 2820 2360 2610 2490 (2460-2585) 2745 (2720-2780) 2625 2800 2625 2125 2730 2195 2485 1985 2615 (2585-2710) 2120 (2095-2155) 2750 2175 2750 2000 2855 2070 2610 1860 2740 (2710-2835) 1995 (1970-2030) 2875 2050 2750 2125 2855 2195 2610 1985 2740 (2710-2835) 2120 (2095-2155) 2875 2175 3000 2000 3105 2070 2860 1860 2990 (2960-3085) 1995 (1970-2030) 3125 2050 3000 2125 3105 2195 2860 1985 2990 (2960-3085) 2120 (2095-2155) 3125 2175 DF 98 4000 2000 4096 2073 3840 1820 3990 (3950-4070) 1995 (1960-2020) 4116 2043 4000 2125 4096 2198 3840 1945 3990 (3950-4070) 2120 (2085-2145) 4116 2168 4500 2000 4596 2073 4340 1820 4490 (4450-4570) 1995 (1960-2020) 4616 2043 4500 2125 4596 2198 4340 1945 4490 (4450-4570) 2120 (2085-2145) 4616 2168 4500 2250 4596 2323 4340 2070 4490 (4450-4570) 2245 (2210-2270) 4616 2293 5000 2000 5096 2073 4840 1820 4990 (4950-5070) 1995 (1960-2020) 5116 2043 5000 2125 5096 2198 4840 1945 4990 (4950-5070) 2120 (2085-2145) 5116 2168 * Clear passage dim. (garage door with stepped floor) Width: Ordering size less 140 mm (160 mm for DF 98 door) Height: Ordering size less 140 mm (180 mm for DF 98 door) Height: Ordering size less 155 mm for design 905 (200 mm for DF 98 door) 26 Height: 25 mm more clearance (with flat floor)

Fitting details for door type N 80 Position of anchors FFL Overall frame size Recommended structural height FFL Overall frame height - 80 Distance back for SupraMatic electric operator* Inside OFR Overall frame height - 195 Overall frame size Recommended structural dim. * Distance back for SupraMatic electric operator: 3100 mm up to door height 2375 mm 3350 mm up to door height 2625 mm 4100 mm up to door height 2750 mm min. 65 Fitting behind the opening min. 65 min. 65 min. interior garage dim. = overall frame size + 10 Overall frame size = ordering size + 105 Ordering size min. 3 min. 3 Fitting area Recommended structural dim. min. 65 Headroom ** min.50 Recommended structural dim. Fitting area Door with stepped floor min. 9 FFL Ordering size Overall frame size = ordering size + 70 FFL Door with flat floor The structural height given in the table (page 26) must be increased by 25 mm. Recommended structural dim. + 25 FFL The recommended structural dimensions are recommended planning dimensions. Minimum sideroom, headroom and opening sizes are all based on these dimensions. With SupraMatic operator * No additional headroom required. Exception: style 905, 941, style with timber infill = 15 mm clearance. Fitting in the opening Overall frame size = ordering size + 105 Ordering size Door with stepped floor Door with flat floor The structural height given in the table (page 26) must be increased by 25 mm. Fitting area Structural dimension Fitting in the opening requires that the given dimensions be adhered to with greater accuracy, particularly where standard-sized doors are concerned. Special-sized doors are purpose-built for the existing structural opening. Structural height Fitting range Ordering size Overall frame size = ordering size + 70 FFL FFL FFL Structural dim. + 25 With SupraMatic operator No additional headroom required. Exception: style 905, 941, designs with timber infill = 15 mm clearance. 27

Fitting details for door type DF 98 Position of anchors FFL Overall frame size Recommended structural height FFL Overall frame height + 10 Distance back for SupraMatic electric operator* Inside OFR Overall frame height - 270 min. 110 Fitting behind the opening Overall frame size Recommended structural dim. min. 65 * Distance back for SupraMatic electric operator: 3100 mm up to door height 2375 mm 3350 mm up to door height 2625 mm 4100 mm up to door height 2750 mm min. interior garage dim. = overall frame size + 20 Overall frame size = ordering size + 96 Ordering size Headroom ** min.90 Door with stepped floor Door with flat floor The structural height given in the table (page 30) must be increased by 25 mm. min. 110 min. 5 min. 5 Fitting area Recommended structural dim. min. 65 Recommended structural height Fitting area min. 5 Ordering size Overall frame size = ordering size + 73 FFL FFL FFL Recommended structural dim. + 25 The recommended structural dimensions are recommended planning dimensions. Minimum sideroom, headroom and opening sizes are all based on these dimensions. Note for standard sizes: if the sideroom ranges between 65 mm and 110 mm, state this on the order. With SupraMatic operator * 65 mm clearance Fitting in the opening Overall frame size = ordering size + 96 Ordering size Fitting area Structural dim. Door with stepped floor Structural dim. Fitting area Ordering size FFL Overall frame size = ordering size + 73 FFL Door with flat floor The structural height given in the table (page 30) must be increased by 25 mm. Recommended structural dim. + 25 FFL Fitting in the opening requires that the given dimensions be adhered to with greater accuracy, particularly where standard-sized doors are concerned. Special-sized doors are purpose-built for the existing structural opening. With SupraMatic operator 65 mm clearance 28

Fitting details for garage side doors Single-leaf Position of anchors Door with flat floor Door with stepped floor FFL Structural opening 15 Structural opening Ordering size Clear passage height FFL Rain canopy Clear passage height Ordering size Structural opening FFL Clear passage height* Ordering size Structural opening Ordering size Clear passage height* Standard sizes for single-leaf doors Dimensions in mm Ordering size Structural Clear passage dimensions Height of (BR) opening with treshold without treshold lever handle Width Height Width Height Width Height Height from FFL 875 1875 885 1880 830 1840 1855 990 875 2000 885 2005 830 1965 1980 1050 875 2125 885 2130 830 2090 2105 1110 1000 2000 1010 2005 955 1965 1980 1050 1000 2125 1010 2130 955 2090 2105 1110 Double-leaf For doors with a stepped floor, opening outwards, the ordering height is always measured from the finished floor line of the deeper floor. Standard sizes with steel infill and for site infill are supplied as standard for internal fitting (opening inwards). By reversing the fittings, the doors can be converted to external fitting (opening outwards). Designs with timber infill only possible for external fitting. *With an opening angle of less than 170, the clear passage width is reduced. Block frame for fitting into the opening: dimensions and versions on request. Special sizes and special versions on request. Maximum size range (BR): 1250 x 2375 mm. Position of anchors Door with flat floor Door with stepped floor Recess on site for U-shaped flush bolt Recess on site for U-shaped flush bolt FFL Structural opening = BRH + 5 Ordering height (BRH) Clear passage height = BRH - 23 FFL Overall frame size = BRH + 79 Overall frame height = BRH + 79 FFL Clear passage height = BRH - 43 Ordering height (BRH) Structural opening = BRH + 5 Single-leaf RH hinged Double-leaf Structural opening = BRB + 10 Ordering size (BRB) Clear passage width* = BRB - 45 Fixed leaf Traffic leaf Overall frame size = BRB + 115 LH hinged Traffic leaf Traffic leaf LH hinged RH hinged Internal fitting For internally fitted doors, the threshold angle/transport angle should always be removed. Adequate water drainage to the outside must then be ensured. Recess on site for U-shaped flush bolt Single-leaf Double-leaf External fitting With threshold profile. Overall frame size = BRB + 115 Fixed leaf Depth into floor Traffic leaf Clear passage width* = BRB - 45 Ordering size (BRB) Structural opening = BRB + 10 RH hinged Traffic leaf LH hinged LH hinged Traffic leaf RH hinged * With an opening angle of less than 170, the clear passage width is reduced. Block frame for fitting into the opening: dimensions and versions on request. Supplied as standard for external fitting (opening outwards), traffic leaf on right. If internal fitting (opening inwards) or traffic leaf on left required, state on order. Size range for double-leaf doors Width (ordering size): from 1300 to 2500 mm Height (ordering size): from 1750 to 2250 mm Panelled designs only up to BRB = 2000 mm Recess on site for U-shaped flush bolt 29

Specifications Up-and-over garage doors N 80 and DF 98 Model Up-and-over garage door for domestic use, designed for electric operator, fulfils the relevant safety requirements to EN Standard 12604. Door type N 80 for single garages DF 98 for double garages Design Dimensions Standard and special sizes possible BR width mm BR height mm Door leaf Door leaf infill in steel or timber in a variety of designs Door leaf frame to 4 sides made of rectangular steel sections, with seam welded corners, with waterrepellent sloping surface on the outside Reinforced via 2 horizontal profiles Closing edge protection as foot guard at the bottom (DF 98) Adjustment facility via bottom stabiliser from 4500 mm width (DF 98) Style 905 open-for-infill All frame surfaces to accept the door leaf have fixing holes at 30 mm spacings for internal fastenings, invisible from the outside If required bottom section can be easily removed For infill within or overlapping the frame up to 10 kg/sqm (N 80) For infill within or overlapping the frame up to 16 kg/sqm (DF 98) Three-sided block frame (N 80) Three-sided block frame (DF 98) With removable weather bar Damping profiles as finger trap protection and for quiet door closing (requirements to new EN Standard 12604) Multiple spring safety system with trap protection and anti-crash safety device For fitting behind the opening in the opening Frame Fittings/locks Special lock with multiple closing functions and profile half-cylinder with 2 keys On both bottom corners automatic plastic latches, with N 80 also adjustable With HBT N 80 design 914 for safety reasons concealed fixed latching, horizontally positioned On the outside round section handle made of weather-proof plastic, on the inside "T" handle Rollers Hard-wearing plastic rollers (N 80) Hard-wearing plastic ball bearings (DF 98) All bearing positions with plastic bushes All steel parts made of galvanised steel Door leaf powder-coated (all colours based on RAL) RAL 9016 Traffic White RAL 5014 Pigeon Blue RAL 6005 Moss Green RAL 7040 Window Grey RAL 8001 Ochre Brown RAL 8028 Terra Brown RAL to choice The following are not available: Pearl-effect, luminous and metallic colours. Door leaf frame for site infill or with factory-fitted timber infill as standard primed dark brown based on RAL 8028 Styles with timber infill Timber cladding including door leaf frame and door frame made of profiled boards in softline design, screwed onto the inside (not visible from the outside) Styles 923-927 with timber cladding, but without frame surround (see brochure pages 17-18). Profiled timber primer impregnated in a neutral shade for individual site finishing Surface Optional extras Glazing with clear acrylic pane, style... Glazing with crystal-structured acrylic pane, style... Door handle no.... Third latch Bottom threshold rail in stainless steel Rubber bottom profile for N 80 (not possible with factory-fitted insulation panels) Fascia panels Polyurethane insulating boards for site-fitting (only for N 80) Insulating panels (factory-fitted) Dämmtec anti-drumming coating on the inside of the door in Light Grey, based on RAL 7035 Door for an increased number of door cycles (DF 98 up to 100,000 cycles) Side door/wicket pass door Side door: matching the garage door (see pages 15-18 and page 29) Wicket pass door: see page 4 Opening outwards, LH or RH-hinged (designs 902, 905, 914, 934). Fitting Anchor brackets Plug and screw fixing Item Quantity Description Price Total each price Ready-to-fit up-and-over garage door with rectangular steel section frame, tracks with buffer stop and once-piece door leaf. Weight counterbalanced by tension springs with multiple spring safety system via lifting arms, automatic latching on both sides (adjustable), lock with profile halfcylinder and round section handle set. Door leaf primer powder-coated in traffic white based on RAL 9016. Make: Hörmann up-and-over garage door N 80 Design: Size (BR): Surface: Glazing: Handle set: Fitting: Example To be compiled and specified as required from the available technical data. Standard Choice/on request Please complete 30

Hörmann can also supply all the doors for your home For all the different areas throughout the home Hörmann can offer you the right door. From the attractive entrance door in 300 different designs down to the basement and right up to the attic. Your Hörmann specialist will be happy to advise you. ZK internal doors in affordable quality The low-priced quality doors in steel. Ideal for the basement and attic, hobby and wet rooms. Available in many different colours and variations. Multi-purpose doors for inside and outside The fully galvanised powdercoated doors for the basement exit and for outbuildings. Thanks to their double-skinned, additionally steel reinforced door leaf and all-round sealing these doors offer a reliable closure as well as good thermal and acoustic insulation. Doors for your security The tested security doors feature a highly effective locking system and solid bolts. For your own personal safety and to protect all your household valuables. Steel fire doors and hatches are recommended for your boiler and oil storage rooms. If the worst should come to the worst, they offer sound protection. Request a copy of our specialist brochure from your Hörmann specialist.

Hörmann KG Amshausen Hörmann KG Antriebstechnik Hörmann KG Brandis Hörmann KG Brockhagen Hörmann KG Dissen Hörmann KG Eckelhausen Hörmann KG Freisen Hörmann KG Ichtershausen Hörmann KG Werne Hörmann Genk NV, Belgien Hörmann Beijing, China Hörmann Inc. Vonore TN, USA (Issue 06.01) 84 095 E/P Print 03.03 Hörmann: Quality without compromise Hörmann is the only manufacturer worldwide that offers you a complete range of all major building products from one source. We are manufacturing in highly-specialized factories using the latest production technologies. The close-knit network of sales- and service companies throughout Europe, and the activities in the USA and China make Hörmann your strong partner for first-class building products, offering "Quality without compromise". Doors Up-and-over garage doors Sectional garage doors Sectional industrial doors Rolling shutters Rolling grilles Folding doors Fire station folding doors High speed doors Sliding doors Steel sliding gates Double-swing doors Strip curtains Hinged Doors Fire resistant and smoke-tight doors Multipurpose doors Security doors Acoustic doors Internal doors Entrance doors in aluminium Canopies for entrance doors Windows in aluminium Door Frames Door frames in galvanised steel Special door frames in steel Door frames in stainless steel Operators Garage door operators Entrance gate operators Operators for industrial doors Loading Technology Dock levellers Dock seals Loading houses www.hoermann.com Hörmann (UK) Ltd, Gee Road, Coalville, Leicestershire LE67 4JW, Tel (01530) 513000, Fax (01530) 513001