Bending & Rolling SPECIALISTS www.bendtechgroup.com.au
Our 200NB x 12mm wall, pipe bender makes us one of the largest, low cost and efficient benders in Australia Over 30 years of market leading bending, rolling and fabrication Leaders in precision, low tolerance bending and rolling Extensive expertise, high-performance machinery and equipment We pride ourselves on continually improving service and delivery The industry benchmark for safe, certified and compliant solutions PG 2 / BEND-TECH / ENGINEERED TOUGH
Our extensive experience in bending and rolling has resulted in completed projects for heat transfer, slurry lines, subsea power transfer and high-pressure fluid conveyance. Our 200 NB x 12mm wall pipe bender now makes us one of the largest, low cost and efficient pipe benders in Australia. Our leading bending and rolling capabilities have enabled us to successfully deliver projects from many industries and for many different applications for decades. Our market leading expertise and highperformance equipment provides the quality and precision necessary to complete complex projects. We pride ourselves on the level of service, quality, safety and compliance outcomes we are able to provide for our clients. www.bendtechgroup.com.au / PG 3
mandrel bending Our extensive bending capabilities and state of the art CNC machinery ensure we execute a wide range of shapes and sizes. We can bend round, square, rectangular, oval or specially-shaped tube or pipe. Schedule Pipe Size Size Section Outside Ø Tightest CLR 20 SCH 10-160 26.7 60mm 25 SCH 10-160 33.4 50mm 32 SCH 10-160 42.2 73mm 40 SCH 10-160 48.3 90mm 50 SCH 10-160 60.3 125mm 65 SCH 10-160 73 182mm 80 SCH 10-160 88.9 178mm 90 SCH 40-160 101.6 203mm 100 SCH 40-160 114.3 254mm 125 SCH 40-160 141.3 250mm 150 SCH 40-160 168.3 305mm 200 SCH 40-80 219.1 640mm Tube Stainless Steel Size Wall Thickness Tightest CLR 19 1.6 28mm 22.2 1.6, 2 39mm 25.4 1.6, 2 50mm 31.8 1.6, 2 48mm 38.1 1.6 57mm 50.8 1.6 100mm 63.5 1.6 105mm 76.1 1.6, 2 152mm Tube Aluminium Bending Grade Not all Aluminium tubing is bending grade, so ensure the tubing is bend gradeable such as T-52 and alike to avoid damage. Size Wall Thickness Tightest CLR 19 3.2 28mm 25 3 50mm 32 3 48mm 38.1 3.25, 4.5 57mm 48 4 90mm 50 4 100mm 60 6 125mm 76 6 152mm 100 6 203mm 114 6.35 304mm 160 10 500mm 219 12 640mm Tube Electric Resistance Welded (ERW) Size Wall Thickness Tightest CLR 19 1.6 28mm 22.2 1.6, 2 39mm 25.4 1.6, 2 31mm 31.8 1.6, 2 48mm 38.1 1.6 53mm 50.8 1.6 100mm 63.5 1.6 105mm 76.1 1.6, 2 152mm Square Hollow Section (SHS) SHS Wall Thickness Tightest CLR 20 x 20 1.6 70mm 25 x 25 1.6, 2, 2.5, 3 75mm 30 x 30 1.6, 2, 2.5, 3 90mm 40 x 40 2, 2.5, 3, 4 120mm 50 x 50 2.5, 3, 4, 5 182mm 65 x 35 3, 4, 5, 6 182mm Measurements are in millimeters. CLR means Center Line Radius PG 4 / BEND-TECH / ENGINEERED TOUGH
High Pressure Sub-Sea Energy Transfer Lines - Precision bending completed by our experienced team Low tolerance, precision bending specialists www.bendtechgroup.com.au / PG 5
section rolling We can roll standard structural shapes such as pipe, angle, flat, channel, UB s and UC s, as well as a broad range of aluminium extrusions. We are market leaders rolling spirals, cones, ellipses, and any number of more complex geometric shapes. Schedule Pipe Size Size Section Outside Ø Tightest CLR 20 SCH 10-160 26.7 100mm 25 SCH 10-160 33.4 150mm 32 SCH 10-160 42.2 200mm 40 SCH 10-160 48.3 250mm 50 SCH 10-160 60.3 300mm 65 SCH 10-160 73 350mm 80 SCH 10-160 88.9 400mm 90 SCH 40-80 101.6 500mm 100 SCH 40-80 114.3 600mm 125 SCH 40-80 141.3 750mm Tube Electric Resistance Welded (ERW) Size Wall Thickness Tightest CLR 19 1.6 100mm 22.2 1.6, 2 100mm 25.4 1.6, 2 100mm 31.8 1.6, 2 150mm 38.1 1.6 200mm 50.8 1.6 300mm 63.5 1.6 500mm 76.1 1.6, 2 650mm 101 1.6, 2 750mm Tube Stainless Steel Size Wall Thickness Tightest CLR 19 1.6 100mm 22.2 1.6, 2 100mm 25.4 1.6, 2 100mm 31.8 1.6, 2 150mm 38.1 1.6 200mm 50.8 1.6 300mm 63.5 1.6 500mm 76.1 1.6, 2 650mm 101 1.6, 2 750mm Tube Aluminium Bending Grade Not all Aluminium tubing is bending grade, so ensure the tubing is bendable grade such as T-52 and alike to avoid damage. Size Wall Thickness Tightest CLR 19 3.2 100mm 25 3 100mm 32 3 150mm 38.1 3.25, 4.5 200mm 48 4 300mm 50 4 300mm 60 6 500mm 76 6 650mm 100 6 800mm Square Hollow Section (SHS) SHS Wall Thickness Tightest CLR 20 x 20 1.6 100mm 25 x 25 1.6, 2, 2.5, 3 125mm 30 x 30 1.6, 2, 2.5, 3 150mm 35 x 35 1.6, 2, 2.5, 3 200mm 40 x 40 1.6, 2, 2.5, 3, 4 250mm 50 x 50 2, 2.5, 3, 4, 5 300mm 65 x 65 3, 4, 5, 6 350mm 75 x 75 3, 4, 5, 6 400mm 89 x 89 5, 6 450mm 100 x 100 5, 6, 9 500mm 125 x 125 5, 6, 9 600mm Measurements are in millimeters. CLR means Center Line Radius PG 6 / BEND-TECH / ENGINEERED TOUGH
Flat Bar Edge Flat Bar has two variations, on its edge (the largest surface) and on the flat (the narrow surface). RHS Bar Thickness Tightest CLR Edge 20 3, 5 200mm 25 3, 5, 6, 8, 10, 12 200mm 32 3, 5, 6, 8 200mm 40 3, 5, 6, 8, 10, 12, 16 200mm 50 3, 5, 6, 8, 10, 12, 16 200mm 65 5, 6, 8, 10, 12, 16 250mm 75 5, 6, 8, 10, 12, 16 300mm 90 6, 8, 10, 12 400mm 100 5, 6, 8, 10, 12, 16 500mm 110 8, 10, 12, 16 600mm 130 10, 12, 16 900mm 150 10, 12, 16 10000mm Flat Bar Flat Flat Bar has two variations, on its edge (the largest surface) and on the flat (the narrow surface). RHS Bar Thickness Tightest CLR Flat 20 3, 5 150mm 25 3, 5, 6, 8, 10, 12 150mm 32 3, 5, 6, 8 150mm 40 3, 5, 6, 8, 10, 12, 16 150mm 50 3, 5, 6, 8, 10, 12, 16 150mm 65 5, 6, 8, 10, 12, 16 150mm 75 5, 6, 8, 10, 12, 16 150mm 90 6, 8, 10, 12 150mm 100 5, 6, 8, 10, 12, 16 150mm 110 8, 10, 12, 16 150mm 130 10, 12, 16 150mm 150 10, 12, 16 150mm 180 10, 12, 16 150mm 200 10, 12, 16 150mm Rectangular Hollow Section (RHS) Edge RHS has two variations, on its edge (the largest surface) and on the flat (the narrow surface). RHS Wall Thickness Tightest CLR Edge 76 x 38 1.6, 2 1000mm 50 x 25 2, 2.5, 3 250mm 65 x 35 3, 4 350mm 75 x 50 3, 4, 5, 6 400mm 100 x 50 4, 5, 6, 9 650mm 125 x 75 4, 5, 6 1000mm 150 x 50 4, 5 1500mm 150 x 100 4, 5, 6, 9 2500mm Rectangular Hollow Section (RHS) Flat RHS has two variations, on its edge (the largest surface) and on the flat (the narrow surface). RHS Wall Thickness Tightest CLR Flat 76 x 38 1.6, 2 2000mm 50 x 25 2, 2.5, 3 300mm 65 x 35 3, 4 400mm 75 x 50 3, 4, 5, 6 450mm 100 x 50 4, 5, 6, 9 800mm 125 x 75 4, 5, 6 1200mm 150 x 50 4, 5 2000mm 150 x 100 4, 5, 6, 9 3000mm www.bendtechgroup.com.au / PG 7
section rolling Angle Bar Toe In Angle Bar has two variations, Toe In (the indent inside the bar) and Toe Out (the indent outside the bar). Angle Thickness Tightest CLR T/IN 25 x 25 3, 5 200 30 x 30 3, 5, 6, 8, 10, 12 200 40 x 40 3, 5, 6 250 50 x 50 3, 5, 6, 8 300 65 x 65 5, 6, 8, 10 400 75 x 50 5, 6, 8 300 75 x 75 8, 10 500 90 x 90 8, 10 600 100 x 75 8, 10 500 100 x 100 8, 10, 12 750 125 x 75 10 500 Angle Bar Toe Out Angle Bar has two variations, Toe In (the indent inside the bar) and Toe Out (the indent outside the bar). Angle Thickness Tightest CLR T/Out 25 x 25 3, 5 75 30 x 30 3, 5, 6, 8, 10, 12 100 40 x 40 3, 5, 6 150 50 x 50 3, 5, 6, 8 200 65 x 65 5, 6, 8, 10 400 75 x 50 5, 6, 8 200 75 x 75 8, 10 400 90 x 90 8, 10 500 100 x 75 8, 10 400 100 x 100 8, 10, 12 600 125 x 75 10 400 125 x 125 10, 12 750 Universal Beams / Columns Flat Universal Beams has two variations, on its edge (the largest surface) and on the flat (the narrow surface). UB / UC 150UB14 1000 150UB18 1000 180UB16.1 2000 180UB18.1 2000 180UC14.8 1500 150UC23.4 2000 150UC30 2000 150UC37.2 2000 Tightest CLR Flat Universal Beams / Columns Edge Universal Beams has two variations, on its edge (the largest surface) and on the flat (the narrow surface). UB / UC 150UB14 3000 150UB18 3000 Tightest CLR Edge Measurements are in millimeters. CLR means Center Line Radius PG 8 / BEND-TECH / ENGINEERED TOUGH
Parallel Flange Channel (P.F.C) Toe Out P.F.C have two variations, Toe In (the indent inside the bar) and Toe Out (the indent outside the bar). Channel PFC 75 x 40 200 100 x 50 300 125 x 65 400 150 x 75 600 180 x 75 1200 200 x 75 1500 Tightest CLR T/Out Parallel Flange Channel (P.F.C) Toe In P.F.C have two variations, Toe In (the indent inside the bar) and Toe Out (the indent outside the bar). Channel PFC 75 x 40 200 100 x 50 300 125 x 65 500 150 x 75 1000 180 x 75 1200 200 x 75 1500 Tightest CLR T/IN www.bendtechgroup.com.au / PG 9
Our reputation and high performance, quality workmanship has enabled us to undertake bending and rolling projects from across all industries and applications. Our clients know we have the experience and machinery to handle their project. a. d. e. f. PG 10 / BEND-TECH / ENGINEERED TOUGH
b. c. a. 200NB Bends for Slurry Pipework Completed in-house on our 200NB pipe bender, ready for despatch for underground coal mining b. Duplex S/S High Pressure Gas Coils Preparation and bending completed in house ready for delivery and installation for gas detection on a large Oil & Gas project in Australia c. Optus Stadium Bus Station - Roof Structure Precision rolling completed by our experienced team for the Optus stadium bus station d. Heat Exchanger Tube Bundles We cut and bent the whole project ready for installation to refurbish a super-heater, heat exchanger unit e. 50mm DIA Polished Stainless Steel Bending completed by our experienced team, ready for installation as handrails f. High Corrosive Liquids Coil Unit Precision bending in the hands of our experienced team www.bendtechgroup.com.au / PG 11
Global industry leaders in mining, engineering and fabrication solution innovation and development about us We deliver sustained value by providing cutting-edge solutions through collaboration and innovation. For more than 30 years we have delivered intelligent design and custom-certified products and services to the Mining, Fabrication, Marine, and Oil and Gas industries across Australia and around the world. We have achieved this through a deep understanding of our customers and their requirements as well as innovative and industry leading design, engineering and construction. PERTH 08 9459 8600 SYDNEY 02 9764 6607 BRISBANE 07 3117 3780 KALGOORLIE 08 9021 8300 NEWMAN 08 9175 1164 MOUNT ISA 07 4743 6458 sales@bendtechgroup.com.au www.bendtechgroup.com.au PG 12 / BEND-TECH / ENGINEERED TOUGH