TMdrive AC/DC DRIVE Series New Dr ive Generation for All Applications TOSHIBA MITSUBISHI-ELECTRIC INDUSTRIAL SYSTEMS CORPORATION
TMEIC (Toshiba Mitsubishi-Electric Industrial Systems Corporation) as a new global leader in the field of electrical products and engineering has developed drive products under the TMdrive trademark by integrating leading technology and service capability of Toshiba Corporation and Mitsubishi-Electric Corporation. Based on more than a century of their experience in converting electrical power into productive performance, TMEIC offers the best drive system solution with peak performance, reliable quality and optimum profitability. Innovative Concepts of TMdrive AC Drives for System Application High-tech large power devices with two options IEGT 1,GCT 2 Continuous and stable supply of versatile devices Diode, IGBT 3, IEGT, GCT Extraordinary expertise in application of large power devices TMdrive-10e2 TMdrive-30/50 TMdrive-70e2 Global standard voltages 460/575/690V, 2.3/3.3/4.16/6.6/11kV Global rules IEEE, ULcUL, CSA IECCE AC Drives for General Application High power quality : High efficiency, little high-harmonics High performance : High performance 32 bit micro-processor Model PP7, Autotuning Open communication: Global/Defacto standard LAN systems Profibus, Modbus, DeviceNet, ISBus, TC-net, MELPLAC Technology Migration DuraBilt 5i TMdrive-MVG2/MVe2 TMdrive-XL55 TMdrive-XL75 TMdrive-XL80 TMdrive-XL85 Motor voltage 2.3kV 4.16kV DuraBilt/MVe2 DuraBilt Power Devices IEGT GCT IGBT Power Bridge Device cooling Multi-stage Insulation Control PWM/Vector Autotuning Simulation Capacity System drive General drive TOSHIBA MITSUBISHI ELECTRIC 2 1 IEGT: Injection Enhanced Gate Transistor2 GCT : Gate Commutated Turn-off Thyristor3 IGBT: Insulated Gate Bipolar Transistor 3
LV AC Drive MV AC Drive Product TMdrive-10e2/10A(Inverter) TMdrive-P/D10e2,T10(Converter) TMdrive-30 TMdrive-P/D/T30 TMdrive-50 TMdrive-P50 TMdrive-70e2 TMdrive-P70e2 TMdrive-MVG2 TMdrive-MVe2 DuraBilt for North America Typical View Line-side Common with IGBT(P), diode(d) or thyristor(t) Common with IGBT(P), diode(d) or thyristor(t) Common with IGBT(P) Common with IEGT(P) Diode-based multi-level IGBT-based multi-level 24 pulse diode Inverter 2 level PWM 1 3 level PWM-NPC 3 3 level PWM-NPC 3 level PWM-NPC Multi-level PWM Multi-level PWM 3 level PWM-NPC (2.3 kv) 5 level PWM (4.16 kv) Device in inverter IGBTs IGBTs IGBTs IEGTs IGBTs IGBTs IGBTs Cooling system Heatpipe air cooled Heatpipe air cooled Water cooled Water cooled Forced air cooled Forced air cooled Forced air cooled Output voltage 440/460/575/690 V 1.25 kv 3.3 kv 3.3 kv 3.3/6.6/10/11 kv 3.3/4.16/6.6/10/11 kv 2.3/4.16 kv Maximum capacity 1,750 kva/440 V 2,400 kva/690 V 4,000 kva (2x2,000 kva) 6,000 kva (2x3,000 kva) 36 MVA (4x9 MVA) 5,700 kva/3.3 kv 11,400 kva/6.6 kv 17,500 kva/10 kv 19,500 kva/11 kv 1,500 kva/3.3 kv 1,890 kva/4.16 kv 3,000 kva/6.6 kv 4,500 kva/10 kv 5,000 kva/11 kv 3,000 HP/2.3 kv 10,000 HP/4.16 kv Overload 150%-60 sec. 150%-60 sec. 150%-60 sec. 150%-60 sec. 125%-60 sec. 110%-60 sec. 115%-60 sec. Max output freg 200 Hz 120 Hz 60 Hz 75 Hz 60/120 Hz (3.3/6.6 kv) 60/72 Hz (10/11 kv) 60/120 Hz (3.3/4.16/6.6 kv) 60/72 Hz (10/11kV) 60/120 Hz Speed control V/f 2 control V/f control Vector control Vector control Sensorless vector control, V/f control V/f control Sensorless vector control, V/f control Motor Type Permanent magnet synchronous motor Induction motor Major application Metal processing, paper machine, crane, conveyor, Dynamo meter Metal processing, Marine, Mining Metal processing, Marine, Mining Main steel machinery, Marine, Electric power, Large-capacity compressor General single-unit applications, Wind- and hydro-powered machines, Extruder General single-unit applications, Wind- and hydro-powered machines, Extruder Pump, Fan, Blower, Extruder, Mixer Features -10e2: max. 8 stages -10A: max. 12 stages Compact with heatpipe technology, Regen with IGBT/ Thyristor High efficiency, low-input harmonics, compact, Regeneration supported, Reactive power control High efficiency, low-input harmonics, Compact, Regeneration supported, Reactive power control Reduction of power supply harmonics, driving of standard electric motors, no velocity sensor required, commercial synchronizer Reduction of power supply harmonics, driving of standard electric motors, no velocity sensor required, Regeneration supported, space-saving, commercial synchronizer, Reactive power control Clean AC power, No sensor required for most application TMdrive-P10e2, -10e2 TMdrive-P30, -30 TMdrive-P50, -50 TMdrive-P70e2, -70e2 Input voltage transformer, 9-cell inverter Input voltage transformer, 9-cell inverter Transformer Cells Circuit diagram In case of IGBT In case of IGBT In case of 3.3kV In case of 6.6kV In case of 4.16kV 4 TMdrive-P10e2: IGBT TMdrive-D10e2: Diode TMdrive-T10: Thyristor 1 PWM : Pulse Width Modulation 2 V/f : Voltage/Frequency 3 NPC : Neutral Point Clamped 5
Application With extraordinary expertise in power conversion and an integrated approach worldwide, TMEIC offers drive solutions for all industrial applications where drives are essential. Product MV AC Drive TMdrive-XL55 TMdrive-XL75 TMdrive-XL80 TMdrive-XL85 TMdrive-DC DC Drive Typical View Water/ Waste water Plant Pump Fan Mining, Ore processing Industries WinderPump FanConveyer Kiln Line-side 36 pulse diode 36 pulse diode 12 or 24 pulse diode 36 pulse diode Thyristor (THY) Inverter 5 level PWM 5 level PWM 3 level PWM-NPC 5 level PWM Device in inverter IGBTs IEGTs GCTs GCTs Power Utility Blower Feed pump Circulating pump Cooling system Water cooled Water cooled Water cooled Water cooled Heatpipe air cooled, forced air cooled Output voltage 6.6 kv 6.6 kv 3.8 kv 7.2 kv 440/750/900/1,200 V Some of the areas where TMEIC possesses specialized expertise are: Maximum capacity 7.2 MVA 92 MVA (4x23 MVA) 15 MVA 120 MVA (4x30 MVA) 855 kw/440 V 18,240 kw/1,200 V Overload 110%-60 sec. 110%-60 sec. 110%-60 sec. 110%-60 sec. 150%-60 sec. Max output freg 60/250 Hz 60/250 Hz 60/200 Hz 60/200 Hz DC Speed control Motor Type pattern PWM control 4 ) Speed control Voltage current control DC motor Marine Propulsion Winch Material handling, Transportation Crane Conveyer Lift Ropeway Major application Features Compressor Pump, Wind- and hydro-powered machines, Extruder, Mixer Low-input harmonics, Large-capacity compressor, General large-capacity single-unit applications Higher effi ciency, higher power factor and lower harmonics than LCI and cyclos, Selectable 15MVA model, Large-capacity compressor, General large-capacity single-unit applications Low-input harmonics, Large-capacity compressor Higher effi ciency, higher power factor and lower harmonics than LCI and cyclos, Transformer TMdrive-XL55 Transformer TMdrive-XL75 Transformer TMdrive-XL80 Transformer TMdrive-XL85 Various application Performance improvement through upgrading of an existing DC driver Iron Steel Industries Rolling mill Pulp Paper Industries Paper machine Process line Boiler Chemical Petrochemical Industries CompressorPump ExtruderMixer Process line Circuit diagram Blower Non-regen. Regen. 4 Fixed pulse pattern PWM control : Low order harmonics can be reduced by this control method compared with carrier based PWM method 6 7
TOSHIBA MITSUBISHI-ELECTRIC INDUSTRIAL SYSTEMS CORPORATION TOKYO SQUARE GARDEN, 3-1-1 Kyobashi, Chuo-ku, Tokyo 104-0031, Japan Phone: +81-3-3277-5511 Global Drives Business Promotion Center Power Electronics Systems Division Phone: +81-3-3277-4510, Fax: +81-3-3277-4566 To users of our inverters: PRECAUTIONS Read the entire Instruction Manual carefully for important information about safety, handling, installation, operation, maintenance, and parts replacements. When using our inverters for equipment such as nuclear power control equipment, aviation and space flight control equipment, traffic equipment, and safety equipment, and there is a risk that any failure or malfunction of the inverter could directly endanger human life or cause injury, please contact our headquarters, branch, or office printed on the front and back covers of this catalogue. Such applications must be studied carefully. When using our inverters for critical equipment, even though the inverters are manufactured under strict quality control, always fit your equipment with safety devices to prevent serious accident or loss should the inverter fail (such as failure to issue an inverter trouble signal). TMdrive is a trademark of Toshiba Mitsubishi-Electric Industrial Systems Corporation DeviceNet is a registered trademark of ODVA(Open Device Net Vender Association Inc.) ProfiBus is a registered trademark of PROFIBUS User Organization. registered trademark of Schneider Electric trademarks of Toshiba Corporation MELPLAC is a trademark of Toshiba Mitsubishi-Electric Industrial Systems Corporation All other registered trademarks are the property of their respective companies. All specifications in this document are subject to change without notice.