High Performance Horizontal Machining Center

High Performance Horizontal Machining Center

High Performance Horizontal Machining Center The Yeong Chin Horizontal machining centers are specially developed for high efficiency machining industries; automobile parts like transmission case, engine blocks, valves and vane pump, and medium or large precision molds. The high quality and strengthened MEEHANITE castings are the accuracy foundation of its kind. Various spindle configuration and modular, and coolant through spindle feature suit different machining requirements. Directly driven axial structure of pretension ballscrews ensure the high accuracy level, and reliability. The ATC mechanism is of the highest reliability, and the widely adopted APC feature the flexibility and automation of machining solution. 1

Hi-Speed, Hi-Precision Spindle Design H500A/B Ceramic spindle bearings for high speed machining, features low thermal expansion coefficient and excellent rigidity performance. The ID s of spindle bearings, ø80mm ø3.15" (H500A)/ ømm ø" (H500B), satisfy heavy cutting requirements. Standard isolated direct drive (IDD) spindle, for the #40 spindle of 8,000rpm or the #50 spindle of 6,000rpm, offers excellent power output. High-Low speed winding performs 36kg-m 260.39 lb-ft and excellent cutting capability. (H500B) High Precision, High Rigidity, Powerful Gear-Head Spindle H800B/H2612B The #50 spindle deploys high precision NN series bearings, at max. 4,500rpm is suitable for high rigidity, heavy, and various machining operations. Deploys the spindle oil-thermal-cooling device of 1,300Kcal/h capability to strictly control the spindle heat increment within 10 C efficiently, and to perform the high accuracy machining results. The spindle of motor power output at max.18.5kw 25HP, and the 2-step automatic transmission high-low gear head of 74.1kg-m 535.98 lb-ft max. Torque output easily conducts 650cc/min metal removal heavy cutting capacity. Quill of prolongation design allows deep-hole machining. H500A/B H800B/H2612B H800B/H2612B 2

A great spindle module variety to meet various machining requirements. H500A H500B kgf-m lb-ft 9.74 70.45 10min. kw HP kgf-m lb-ft 36.04 260.7 30min. kw 22 HP 30 7.14 51.64 4.87 35.23 30min. 10min. 30min. 15 11 20 15 29.22 211.4 10min. 18.5 25 3.25 23.51 7.5 10 5.5 1.79 12.95 1.22 8.82 0.91 6.58 0.67 4.85 0 0 0 1,500 2,000 4,000 4,500 6,000 8,000 rpm 7 3.57 3.00 21.70 25.82 0 0 9.01kgf-m L 1,682 10.71kgf-m 30min. H 2,000 0 6,000rpm SPINDLE SPEED (For IDD) (std.) SPINDLE SPEED (std.) H500B H800B/H2612B kgf-m 36.04 lb-ft 260.7 10min. 30min. kw 22 HP 30 kgf-m lb-ft 74.10 535.98 30min. kw HP 29.22 211.4 10min. 18.5 25 60.00 433.99 15 20 30min. 18.5 25 15 20 10.71kgf-m 30min. 3.57 3.00 25.82 21.70 0 0 9.01kgf-m L H 1,682 2,000 0 10,000rpm 4.00 3.25 0 28.93 23.51 0 16.01kgf-m 30min. 12.98kgf-m L H 0 972 1,125 4,500rpm SPINDLE SPEED (opt.) SPINDLE SPEED (std.) 3 POWER TORQUE

Spindle bearing protection Spindle air curtain prevents the bearings from being invaded by cutting chips, dust and water mist, and extends the spindle service life. Coolant through spindle system (opt.) DIN 69871 from A pressure:10kg/cm 2 142.2psi or 20kg/cm 2 284.5psi Spindle air curtain pressure:2kg/cm 2 28.4psi Coolant Air Spindle cooling system COOL COOL COOL COOLER UNIT COOLER UNIT COOLER UNIT HOT HOT HOT HABOR HABOR HABOR COOL COOL COOL COOLER UNIT COOLER UNIT COOLER UNIT HOT HOT HOT HABOR HABOR HABOR H500A H500B COOL COOL COOL COOLER UNIT COOLER UNIT COOLER UNIT HABOR FILTER FILTER HABOR HABOR FILTER HOT HOT HOT H800B/H2612B 4

Quick and reliable ATC mechanism proved by a-million-time running test. H500A/H500B The roller-gear-cam ATC arm, parallel to the spindle of the short-pitch design, makes the ATC prompt and reliable; it takes only 3 sec. (H500A) The magazine is precisely indexed and driven by servo motor for efficient operations. Quick & reliable tool change (H500A/B) H800B/H2612B The ARM type hydraulic ATC mechanism with backlash-free roller-cam design performs stable and reliable ATC. The magazine is indexed by the shortest distance random tool selection to meet the high production requirements; 40T and 60T versions on demand. ATC (H800B/H2612B) 5 ATC magazine (H800B/H2612B) ATC magazine (H500A) ATC magazine activated by servo motor (H500A)

High precision, power clamp APC enhances flexibility and efficiency. H500A/B Compact and smart rotary pallet change design with unique and strengthen rail way support ensures the accurate, fast, and reliable APC. Pallet is swift (on Z-axis) to make APC, the rotary door is quickly turned along with APC, which takes only 8~12 sec. Large size ø450mm ø17.72" position clutch is deployed, together with taper pin in precise positioning, strongly supports the table and meets the rigid machining needs. Optional 0.001 continuous feed 4th axis pallet of dual warm gear design is backlash-free and easily maintained. H800B Shuttle type APC is driven by ballscrew for fast and reliable pallet exchange. Rotary APC (H500A/B) Up to 12-ton pallet clamp force ensures the cutting rigidity, even for max. 2,000kg job load; the pallet index by large diameter (ø600mm ø23.62") curvic coupling performs extreme accuracy and reliability. Alternative pallet division can be 72 or 360 positions. The 800mm x 800mm pallet is clamped by dual cylinder design that assures no dished strain; the pallet can be chosen with T-slot, or tap holes (M16 x 2P). Optional 0.001 continuous feed 4th axis pallet offers multi-face and multi-axis machining capability for its paid value. Rotary table (0.001 ) (H500A/B) APC + safety door (H500A/B) Rotary Table Diagram ø450mm ø17.72 ø600mm ø23.62 H500A/B H800B 6

/ High rigidity construction speedy machine of 30m/min. rapid feedrate The moving column design, the strengthened 3-point support base, and dual wall rib-structure designed column sustain the utmost rigidity, accuracy level, and machine durability. Direct transmission design on all 3 Axes and pre-tensioned ballscrews ensure motion rigidity, and machining accuracy. Deploy high precision linear motion guide ways, THK NR type on the H500A and NSK LA type on the H500B, all ensure excellent machining performance and service life with low friction, high rigidity, high speed and optimal damping force. The rapid feed is 30m/min. (X/Y/Z), and 10m/min. for max. cutting feed. 500 Tolerances Axial Travel Positioning Repeatability / Standard A R ACCURACY ISO 10791-4 Full Length 0.014mm (0.00055") 0.010mm (0.00039") JIS B 6338-0.004mm/300mm (0.00016"/300mm) ±0.002mm (±0.00008") VDI/DGQ3441 is equivalent to A of ISO10791-4, and PS is equivalent to R. All values shown above are measured for machine in good air conditioned environments. Tripled rib design for super rigid structure. 3-point support for easy comissioning. NR type linear motion guides (H500A) YEONG CHIN adopts high quality MEEHANITE casting to maintain the machine's long term accuracy. Rapid Feedrate X 30m/min. 1,181ipm Y 30m/min. 1,181ipm Z 30m/min. 1,181ipm 7

Durable, precision, and speedy machine design with super rigid construction T-shape one piece base of strengthened triangle flame, dual wall design column, inner rail fully embraced Y-axis (up-down) and hydraulic balance, and integrated 3-axis ballscrew bracket make the super rigid machine constructed with utmost supports, and fluent movements. The X/Z axes deploy rigid linear motion guide ways of low friction, hardened and ground with TURCITE-B plated Y-axis assure the accuracy in high-speed movement. The rapid on X-axis is 15m/min., and 12m/min. on Y/Z axes. The 3-axis ballscrews are directly coupled with powerful servo motors, with fixed pretension design, so efficiently eliminate distortion of heat factor, and are backlash-free, thus to keep both the machining rigidity, and accuracy. H800B 800 Tolerances Axial Travel Positioning Repeatability ACCURACY Standard A R ISO 10791-4 Full Length 0.014mm (0.00055") 0.010mm (0.00039") VDI/DGQ3441 is equivalent to A of ISO10791-4, and PS is equivalent to R. All values shown above are measured for machine in good air conditioned environments. YEONG CHIN adopts high quality MEEHANITE casting to maintain the machine's long term accuracy. Rapid Feedrate X 15m/min. 591ipm Y 12m/min. 472ipm Z 12m/min. 472ipm 8

Durable, Precision and Heavy Duty Design with Super Rigid Construction Extra sized base fully supports the table movement of no overhang problem, secures the utmost dynamic accuracy; high precision and rigid ballscrews are deployed on all 3 axes, and supported with precision angular contact ball bearings in pretension, and in all provide the excellent machining rigidity and accuracy. IKO linear roller way (Super X) The X-axis takes complex 4-slideway design; the IKO heavy load roller linear motion guides are in the inner rails, and hardened and ground integrated box way with TURCITE-B plated at the outer rails to allow for heavy job loading at 7,000kg, and still in precise and smooth movements. The THK NR series linear motion guides are installed at Z-axis, provides the enhanced rigidity and moves smoothly. The Y-axis takes inner rail embraced design of the best force flow to sustain the heavy machining engagement on the spindle head, and to extend its service life. H2612B 2612 Tolerances Axial Travel Positioning Repeatability ACCURACY Standard A R ISO 10791-4 Full Length 0.014mm (0.00055") 0.010mm (0.00039") VDI/DGQ3441 is equivalent to A of ISO10791-4, and PS is equivalent to R. All values shown above are measured for machine in good air conditioned environments. YEONG CHIN adopts high quality MEEHANITE casting to maintain the machine's long term accuracy. 9 Rapid Feedrate X 12m/min. 472ipm Y 16m/min. 630ipm Z 16m/min. 630ipm

Y axis Travel 650 25.59 Y axis Travel 1,050 41.34 DIMENSIONS THE MACHINING DIMENSIONS H500A/B 150 5.91 X axistravel Z axis Travel 650 25.59 700 27.56 (H500B) 650 25.59 (H500A) H800B Spindle 250 9.84 Z axis Travel 1,150 45.28 X axis Travel 1,300 Spindle ø800 ø31.50 ø1,150 ø45.28 760 29.92 Center of Table Rotating X axis Y axis Z axis 50 19.7 1,200 47.24 Center of Table Rotating Y axis X axis Z axis Table Table TABLE BOLT HOLE DETAIL H500A/B H800B TABLE CENTER HOLE SECTION A-A H800B H2612B TABLE T-SLOTS ø20 ø0.79 ø50 ø1.97 ø40 ø1.57 H8 22 0.87 40 1.57 30 1.18 5 0.20 45 1.77 2C 19 0.75 M16 x 2P 39 1.54 PULL STUD AND TOOL SHANK BT40 MAS-P40T-1 BT50 MAS-P50T-1 M16 x 2P 2 0.08 ø1.75 ø44.45 25 0.98 ø10 ø0.39 ø53 ø2.09 ø63 ø2.48 ø75.679 ø2.98 ø15 ø0.59 30 3 0.12 28 1.10 ø10 ø0.39 ø23 ø0.91 ø17 ø0.67 M16 x 2P M24 x 3P ø69.85 ø2.75 23.2 0.91 1 0.04 7 0.28 25 0.98 ø85 ø85 ø ø ø23 ø0.91 60 45 85 3.35 45 1.77 40 1.57 8 24 3 0.31 0.94 0.12 ø17 ø0.67 ø38 ø1.50 ø25 ø0.98 Taper 7/24 65.4 2.57 16.6 0.65 45 35 1.38 60 2.36 5 0.2 4 0.14 TAPER 7/24 3 60 0.12 3 0.12 101.8 4.01 139.8 5.50 3 0.12 5 0.2 ø20 ø0.79 8 0.31 10 0.39 35 1.38 5 0.2 M24 x 3P 10

/ DIMENSIONS UNIT : mm inch 5,239 206.26 3,156(60T) 124.25 560 22.05 1,315 51.77 (1,415 55.71) 1,544 60.79 664 26.14 834(60T) 32.83 2,332 91.81 733 28.86 1,550 61.02 R584 R22.99 1,922 75.67 730 28.74 572 22.52 2,833 111.54 ø1,680 66.14 303 11.93 3,915 154.13 450 17.72 5,950 234.25 250 9.84 250 9.84 200 7.87 200 7.87 25 0.98 3,916 154.17 (4,266 167.95) 4,236(60T) 166.77 2,613 102.87 3,240 127.56 (3,400 133.86) 2,613 102.87 1,250 49.21 80 3.15 25 0.98 18 0.71 200 7.87 200 7.87 250 9.84 250 9.84 25 0.98 250 9.84 ( ) H500B H500B 60T 18 0.71 75 2.95 75 2.95 67 2.64 17 0.67 125 4.92 26 1.02 11

/ DIMENSIONS 1,690 66.54 1,590 62.6 970 38.19 840 33.07 UNIT : mm inch 1,755 69.09 250 9.84 250 9.84 200 7.87 200 7.87 1,380 54.33 1,850 72.83 25 0.98 3,780 148.82 610 24.02 80 3.15 25 0.98 18 0.71 790 31.1 1,470 57.87 980 38.58 1,750 68.9 250 9.84 18 0.71 75 2.95 75 2.95 17 0.67 30 1.18 A 15 0.59 A 160 6.3 160 6.3 160 6.3 160 6.3 1,270 50 160 6.3 160 6.3 160 6.3 160 6.3 800 31.5 3,500 137.8 3,965 156.1 6,085 239.57 105 4.13 1,335 52.56 2,275 89.57 2,950 116.14 3,780 148.82 800 31.5 200 7.87 200 7.87 250 9.84 250 9.84 25 0.98 67 2.64 125 4.92 26 1.02 950 1,190 46.85 2,260 88.98 1,945 76.57 610 24.02 12

/ DIMENSIONS 2,510 98.82 791 31.14 750 29.53 R690 R27.17 22 0.8 1,315 51.77 R88 R34.65 5,553 218.62 2,800 110.24 45 1.77 3,125 123.03 6,550 257.87 1, 43.31 19 0.75 3,907 153.82 3,300 129.92 2,450 96.46 2,190 86.22 150 5.91 150 5.91 150 5.91 150 150 5.91 5.91 1,400 55.12 150 5.91 150 5.91 150 5.91 39 1 2,940 115.75 3,615 142.32 250 9.84 6,300 248.03 5,553 218.62 13 UNIT : mm inch

ACCESSORIES : Standard : Optional : None ITEMS H500A H500B H800B H2612B Work Lamp Pilot Lamp Tool Kit Gear Box Y- Electric Speed Shift Optical Scale Hydraulic System Rigid Tapping Coolant Equipment System Coolant Equipment System (Includes Top Cover) 4th Axis Rotary Table Oil Skimmer Full Chip Enclosure (Includes Top Cover) Splash Guard Sub-Table or Auxiliary Table Coolant Gun Cuttng Air Blast Spindle Air Blast Guideway Cover (X,Y,Z) Oil-Mist Coolant System Oil Hole Holder Function Spindle Bearing Air Curtain Central Lubrication System Spindle Cooling System Rotary Table (1 Index) Rotary Table (5 Index) Rotayr Table (0.001 Index) 2 Pallets Coolant Through Spindle System Leveling Blocks and Foundation Bolts Mechanical, Electrical & Operating Manuals Heat Exchanger for Electrical Cabinet A/C. Cooler for Electrical Cabinet Chip Conveyor A.F.C. Adaptive Feedrate Control Heavy Duty Coolant Pump Screw Type Chip Conveyor ( at 2 sides of Z-axis) Screw Type Chip Conveyor (By the Work Table) Rotary Table (0.001 Index) & Magnetic Scale Workpiece Measurement System Auto Tool Length Measurement System Automatic Tool Change (40T) Peripheral Accessories* Spindle Cooling System Ensures Constant Temperature of the Spind Head Central lubrication equipment Heat exchanger for electrical cabinet Screw type chip conveyor Shower coolant * Referring to the table of Accessories 14

5M1E003-00 SPECIFICATIONS SPINDLE H500A H500B H800B H2612B Spindle Speed (opt.) 45~8,000rpm (10,000rpm) 60~6,000rpm (10,000rpm) 45~4,500rpm Spindle Taper BT40 BT50 Front Bearing Diameter ø80mm ø3.15" ømm ø" TRAVEL X-axis Travel 650mm 25.59" 700mm 27.56" 1,300mm 51.18" 2,600mm 102.36" Y-axis Travel 650mm 25.59" 1,050mm 41.34" 1,200mm 47.24" Z-axis Travel 650mm 25.59" 1,150mm 45.28" 1,200mm 47.24" Distance Between Spindle Center and Table Top Distance Between Spindle Nose and Table Center TABLE Table Size 50~700mm 1.97"~27.56" 150~800mm 5.91"~31.5" 500 500mm 19.69" 19.69" ~1,150mm "~45.28" 250~1,400mm 9.84"~55.12" 800 800mm 31.5" 31.5" 200~1,400mm 7.87"~55.12" -250~950mm -9.84"~37.4" 2,800 1,400mm 110.24" 55.12" Max. Load on Table 500kg 1,102 lb 600kg 1,323 lb 2,000kg 4,409 lb 7,000kg 15,432 lb Max. Workpiece Dimensions ø800 760mm H ø31.5" 29.92" H ø1,150 1,200mm H ø45.28" 47.24"H The Height From Table Top to Floor 1,250mm 49.21" 1,335mm 52.56" 1,mm 43.31" Table Index (opt.) 1 (5,0.001 ) Number of T- slots Size Pitch M16 2P 9 22mm 150mm 9 0.87" 5.91" A.P.C Time High Performance Swivel Head 5-axis Vertical Machining Center 8sec. 50sec. FEEDRATE Rapid Feedrate X/Y/Z 30/30/30 m/min. 1,181/1,181/1,181ipm 15/12/12 m/min. 591/472/472ipm 12/16/16 m/min. 472/630/630ipm Cutting Feedrate 1~10,000mm/min. 0.04~394ipm 1~5,000mm/min. 0.04~197ipm ATC Tool Magazine Capacity (opt.) 40T (60T) 40T (60/80T) Max. Tool Dimensions ø85 300mm ø3.35" 11.81" ø125 350mm ø4.92" 13.78" ø120 400mm ø4.72" 15.75" Max. Tool Diameter (without adjacent tools) ø150mm ø5.91" ø240mm ø9.45" Max. Tool Weight (Per Piece) 8kg 17.64 lb 20kg 44.09 lb Tool Pocket Pitch Horizontal Boring 95.25mm Milling 3.75" Machining 133.35mm Center 5.25" 130mm 5.12" Tool Changer Method Double Arm Swing Method Tool Selection Method Random MOTOR Spindle Power 7.5/11/15kW 10/15/20HP (/30min./10min.) 15/18.5/22kW 20/25/30HP (/10min./30min.) 15/18.5kW 20/25HP (/30min.) Index Motor (B-axis) 2.1kW 3HP Feed Motor Rated Output (X/Y/Z) 4/7/4kW 5/9/5HP 7/9/7kW 9/12/9HP 4/4/7kW 5/5/9HP 5.9/4.5/4.5kW 8/8/6HP Lubrication Pump Motor 4W 75W Oil Thermal Control Pump 400W 750W 400W Oil Thermal Control Motor 750W 1,150W 1,270W GENERAL Pneumatic Supply 5kg/cm 2 71.1psi 5.5kg/cm 2 78.2psi Power Consumption (Transformer) 36kVA (40kVA) 67kVA (65kVA) 62kVA (65kVA) 50kVA (65kVA) Machine Weight 15,700kg 34,612 lb 17,650kg 38,911 lb 26,560kg 58,554 lb 27,000kg 59,524 lb Note: The manufacturer reserves the right to modify the design, specifications, mechanisms etc. to improve the performance of the machine without notice. All the specifications shown above are just for reference. 14001 062011-E06-2000