C3M0280090J Silicon Carbide Power MOSFET C3M TM MOSFET Technology N-Channel Enhancement Mode V DS I D @ 25 C R DS(on) 900 V 11 A 280 mω Features Package New C3M SiC MOSFET technology High blocking voltage with low On-resistance High speed switching with low capacitances New low impedance package with driver source Fast intrinsic diode with low reverse recovery (Qrr) Halogen free, RoHS compliant Wide creepage (~7mm) between drain and source Benefits Higher system efficiency Reduced cooling requirements Increased power density Increased system switching frequency Applications Renewable energy Lighting High voltage DC/DC converters Telecom Power Supplies Induction Heating Part Number C3M0280090J Package TO-263-7 Maximum Ratings (T C = 25 C unless otherwise specified) Symbol Parameter Value Unit Test Conditions Note V DSmax Drain - Source Voltage 900 V V GS = 0 V, I D = 100 μa V GSmax Gate - Source Voltage -8/+18 V Absolute maximum values V GSop Gate - Source Voltage -4/+15 V Recommended operational values Note (1) I D Continuous Drain Current 11 V GS = 15 V, T C = 25 C Fig. 19 A 7 V GS = 15 V, T C = 100 C I D(pulse) Pulsed Drain Current 22 A Pulse width t P limited by T jmax Fig. 22 P D Power Dissipation 50 W T C =25 C, T J = 150 C Fig. 20 T J, T stg Operating Junction and Storage Temperature -55 to +150 C T L Solder Temperature 260 C 1.6mm (0.063 ) from case for 10s Note (1): MOSFET can also safely operate at 0/+15 V 1 C3M0280090J Rev. A 01-2018
Electrical Characteristics (T C = 25 C unless otherwise specified) Symbol Parameter Min. Typ. Max. Unit Test Conditions Note V (BR)DSS Drain-Source Breakdown Voltage 900 V V GS = 0 V, I D = 100 μa V GS(th) Gate Threshold Voltage 1.8 2.1 3.5 V V DS = V GS, I D = 1.2 ma 1.6 V V DS = V GS, I D = 1.2 ma, T J = 150ºC I DSS Zero Gate Voltage Drain Current 1 100 μa V DS = 900 V, V GS = 0 V I GSS Gate-Source Leakage Current 10 250 na V GS = 15 V, V DS = 0 V R DS(on) g fs Drain-Source On-State Resistance Transconductance C iss Input Capacitance 150 Fig. 11 280 360 V GS = 15 V, I D = 7.5 A Fig. 4, mω 385 V GS = 15 V, I D = 7.5 A, T J = 150ºC 5, 6 3.6 V DS= 15 V, I DS= 7.5 A S 3.1 V DS= 15 V, I DS= 7.5 A, T J = 150ºC pf V GS = 0 V, V DS = 600 V Fig. 17, C oss Output Capacitance 20 18 f = 1 MHz C rss Reverse Transfer Capacitance 2 VAC = 25 mv E oss C oss Stored Energy 4.5 μj Fig. 16 Fig. 7 E ON Turn-On Switching Energy 19 E OFF Turn Off Switching Energy 3.7 μj V DS = 400 V, V GS = -4 V/15 V, I D = 7.5 A, R G(ext) = 2.5Ω, L= 220 μh, T J = 150ºC Fig. 26, 29 Note(3) t d(on) Turn-On Delay Time 10.5 t r Rise Time 6.5 t d(off) Turn-Off Delay Time 11 t f Fall Time 4 ns V DD = 400 V, V GS = -4 V/15 V I D = 7.5 A, R G(ext) = 2.5 Ω, Timing relative to V DS Inductive load R G(int) Internal Gate Resistance 26 Ω f = 1 MHz, V AC = 25 mv Q gs Gate to Source Charge 2.8 Q gd Gate to Drain Charge 3.4 Q g Total Gate Charge 9.5 nc V DS = 400 V, V GS = -4 V/15 V I D = 7.5 A Per IEC60747-8-4 pg 21 Fig. 27, 29 Note(3) Fig. 12 Reverse Diode Characteristics (T C = 25 C unless otherwise specified) Symbol Parameter Typ. Max. Unit Test Conditions Note V SD Diode Forward Voltage 4.8 V V GS = -4 V, I SD = 4 A 4.4 V V GS = -4 V, I SD = 4 A, T J = 150 C Fig. 8, 9, 10 I S Continuous Diode Forward Current 9 A V GS = -4 V Note (2) I S, pulse Diode pulse Current 22 A V GS = -4 V, pulse width t P limited by T jmax Note (2) t rr Reverse Recover time 20 ns Q rr Reverse Recovery Charge 47 nc I rrm Peak Reverse Recovery Current 3.4 A Note (2): When using SiC Body Diode the maximum recommended V GS = -4V Thermal Characteristics V GS = -4 V, I SD = 7.5 A, V R = 400 V dif/dt = 600 A/µs, T J = 150 C Note (2) Symbol Parameter Max. Unit Test Conditions Note R JC Thermal Resistance from Junction to Case 2.5 R JA Thermal Resistance From Junction to Ambient 40 C/W Fig. 21 2 C3M0280090J Rev. A 01-2018
Typical Performance Figure 1. Output Characteristics T J = -55 ºC Figure 2. Output Characteristics T J = 25 ºC Figure 3. Output Characteristics T J = 150 ºC Figure 4. Normalized On-Resistance vs. Temperature Figure 5. On-Resistance vs. Drain Current For Various Temperatures Figure 6. On-Resistance vs. Temperature For Various Gate Voltage 3 C3M0280090J Rev. A 01-2018
Typical Performance Figure 7. Transfer Characteristic for Various Junction Temperatures Figure 8. Body Diode Characteristic at -55 ºC Figure 9. Body Diode Characteristic at 25 ºC Figure 10. Body Diode Characteristic at 150 ºC Figure 11. Threshold Voltage vs. Temperature Figure 12. Gate Charge Characteristics 4 C3M0280090J Rev. A 01-2018
Typical Performance Figure 13. 3rd Quadrant Characteristic at -55 ºC Figure 14. 3rd Quadrant Characteristic at 25 ºC Figure 15. 3rd Quadrant Characteristic at 150 ºC Figure 16. Output Capacitor Stored Energy Figure 17. Capacitances vs. Drain-Source Voltage (0-200V) Figure 18. Capacitances vs. Drain-Source Voltage (0-900V) 5 C3M0280090J Rev. A 01-2018
Typical Performance Figure 19. Continuous Drain Current Derating vs. Case Temperature Figure 20. Maximum Power Dissipation Derating vs. Case Temperature Figure 21. Transient Thermal Impedance (Junction - Case) Figure 22. Safe Operating Area Figure 23. Clamped Inductive Switching Energy vs. Drain Current (V DD = 600V) Figure 24. Clamped Inductive Switching Energy vs. Drain Current (V DD = 400V) 6 C3M0280090J Rev. A 01-2018
Typical Performance Figure 25. Clamped Inductive Switching Energy vs. R G(ext) Figure 26. Clamped Inductive Switching Energy vs. Temperature Figure 27. Switching Times vs. R G(ext) Figure 28. Switching Times Definition 7 C3M0280090J Rev. A 01-2018
Test Circuit Schematic Figure 29. Clamped Inductive Switching Test Circuit Note (3): Turn-off and Turn-on switching energy and timing values measured using SiC MOSFET Body Diode as shown above. 8 C3M0280090J Rev. A 01-2018
TO-263-7 9 C3M0280090J Rev. A 01-2018
Notes RoHS Compliance The levels of RoHS restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2011/65/ EC (RoHS2), as implemented January 2, 2013. RoHS Declarations for this product can be obtained from your Cree representative or from the Product Documentation sections of www.cree.com. REACh Compliance REACh substances of high concern (SVHCs) information is available for this product. Since the European Chemical Agency (ECHA) has published notice of their intent to frequently revise the SVHC listing for the foreseeable future,please contact a Cree representative to insure you get the most up-to-date REACh SVHC Declaration. REACh banned substance information (REACh Article 67) is also available upon request. This product has not been designed or tested for use in, and is not intended for use in, applications implanted into the human body nor in applications in which failure of the product could lead to death, personal injury or property damage, including but not limited to equipment used in the operation of nuclear facilities, life-support machines, cardiac defibrillators or similar emergency medical equipment, aircraft navigation or communication or control systems, air traffic control systems. Related Links C2M PSPICE Models: http://wolfspeed.com/power/tools-and-support SiC MOSFET Isolated Gate Driver reference design: http://wolfspeed.com/power/tools-and-support SiC MOSFET Evaluation Board: http://wolfspeed.com/power/tools-and-support Copyright 2018 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo, and Zero Recovery are registered trademarks of Cree, Inc. Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5451 www.cree.com/power 10 C3M0280090J Rev. A 01-2018