TURNING Hardinge High Performance and SUPER-PRECISION T-42 Turning Center

TURNING Hardinge High Performance and SUPER-PRECISION T-42 Turning Center Quotation to: ABMNameAlpha Quotation Number: SOHDocumentOrderInvoice Contact: Contact Name Address: ShipToAddressLine1 ShipToAddressLine2 ShipToAddressLine3 ShipToAddressLine4 ShipToCity1, ShipToState, ShipToCountry Date: Month/Day/Year Prices Valid for 30 Days Your Hardinge Representative Sales Person Name Phone Email Address 1 Address 2 City, State, Zip TURNING MILLING GRINDING WORKHOLDING www.hardinge.com

Machine Summary and Quotation Thank you for taking the time to discuss your machine requirements. We are pleased to present the All New Hardinge T-42 Series Turning Center as a solution to your machining requirements. The T - Series turning centers set the standard in high-precision, highperformance turning that will take your part quality and manufacturing capabilities to new heights. This machine is designed to exceed your expectations and is ideal for two-axis, high-precision machining or complex multi-tasking operations that require a high level of precision, delicate part handling and parts made complete in a single setup. High Performance and SUPER-PRECISION machine packages are preconfigured with our most popular features allowing you to select the proper machine tool configuration and precision level to produce your parts in the most effective, accurate, and profitable manner. High- Performance and SUPER-PRECISION high productivity packages are available to choose from with features that include but are not limited to: Live Tooling with C-axis, Sub Spindle, Y-axis, Main Spindle Parts Catcher, and our unique Sub Spindle Parts Catcher designed for removing delicate high precision parts with critical surface finish requirements without damage to the part. What is Hardinge SUPER-PRECISION? SUPER-PRECISION is a combination of best practice design engineering, high precision manufacturing, high quality purchased components, complex software development and integration, intense testing and certification combined with the Hardinge global knowledge and experience of producing the most difficult parts and processes known to the industry. These combined factors are then integrated into a machine tool that ultimately delivers the highest level of precision parts for production turning centers that require the least amount of human intervention in today s competitive marketplace. The SUPER-PRECISION T-Series turning center is designed and built for the ultimate in superior part roundness, surface finish, and minimal total part variation in diameter making it the most accurate production turning center in the market. With these superior features you are able to eliminate expensive secondary finishing operations while reducing cost and part handling! Included Machine Features Main spindle air blast Bar feed interface Three position stack light.000010 /.00010mm resolution control 16 C collet/chuck ready spindle Custom Macro B HARCRETE reinforced cast iron base Environmentally friendly grease lubrication Linear glass scales each axis (X,Y,Z)¹ 187 psi through tool coolant Run time parts counter SUPER-PRECISION Certification¹ Collet closer foot switch CNC Control Fanuc 31i Main spindle parts catcher Chip conveyor interface Maintenance kit (grease and grease gun) Manual Guide i (Conversational Programming) Ethernet ready Rigid tapping Pendent mounted control color display User friendly operators panel Bright LED work lights PCMICA flash card slot Dynamically balanced spindle Laser and ball bar tested¹ Ergonomic design ¹ SUPER-PRECISION Machines Only. Included Machine Features with Sub Spindle Configurations Sub spindle air blast Through sub spindle coolant Sub spindle part ejector 16 C Collet/Chuck ready sub spindle Collet closer foot switch Sub spindle parts catcher Rigid tapping Pneumatic collet closer No tool holders are provided as standard equipment with this machine these must be purchased separately. We offer an extensive line of high-quality tool holders. Please consult with your sales representative for a complete list. Please refer to the following lists for available options and full machine specifications.

T- 42 Major Feature Guide for T, M, S, Y & FLA - kva Calculations Machines are offered in both High Performance (HP) and SUPER-PRECISION (SP) configurations Name prefix T - 42 (T signifies the Series name and 42 signifies the millimeter through spindle capacity) Name Suffix: M, S, Y, T (T in the suffix is for ordering purposes only & will not be used in the machine logo) T = Tailstock M = Live Tooling S = Sub Spindle Y = Y- Axis T- 42 Machine Package Configurations High Performance Package Configurations T- 42 HP Includes: block type static top plate, 16C collet ready spindle, spindle air blast, parts catcher w/conveyor, 187 psi through tool coolant, (1) single position foot switch, Barfeed interface, chip conveyor interface, hydraulic collet closer, 3-position stack light,.000010 /.00010mm resolution control, manual guide i, spindle chiller. 460 volts, 46.4 FLA, 36.97 kva, 3-phase/50-60 Hz T 42 HP M Includes: BMT-45 live tooling top plate, c-axis, 16C collet ready spindle, spindle air blast, parts catcher w/conveyor, 187 psi through tool coolant, (1) single position foot switches, barfeed interface, chip conveyor interface, hydraulic collet closer, 3-position stack light, manual guide I,.000010 /.00010mm resolution control, spindle chiller. 460 volts, 47.5 FLA, 37.84 kva, 3-phase/50-60 Hz T 42 HP T Includes: tailstock, block type static top plate, 16C collet ready spindle, spindle air blast, parts catcher w/conveyor, 187 psi through tool coolant, (2) single position foot switches, barfeed interface, chip conveyor interface, hydraulic collet closer, 3-position stack light, manual guide i.,.000010 /.00010mm resolution control, spindle chiller. 460 volts, 47.5 FLA, 37.84 kva, 3-phase/50-60 Hz T - 42 HP MT Includes: tailstock, BMT-45 live tooling top plate, c-axis, 16C collet ready spindle, spindle air blast, parts catcher w/conveyor, 187 psi through tool coolant, (1) single foot switch, barfeed interface, chip conveyor interface, hydraulic collet closer, 3-position stack light, manual guide i,.000010 /.00010mm resolution control, spindle chiller. 460 volts, 48.9 FLA, 38.96 kva, 3-phase/50-60 Hz T 42 HP MY Includes: BMT 45 live tooling top plate, c-axis, y-axis, 16C collet ready spindle, spindle air blast, parts catcher w/conveyor, 187 psi through tool coolant, (2) single foot switches, barfeed interface, chip conveyor interface, hydraulic collet closer, 3-position stack light, manual guide i,.000010 /.00010mm resolution control, spindle chiller. 460 volts, 48.8 FLA, 38.88 kva, 3-phase/50-60 Hz T 42 HP MYT Includes: BMT-45 live tooling top plate, c-axis main, y-axis, tailstock, 16C collet ready spindle, main spindle air blast, main spindle parts catcher w/conveyor, 187 psi through tool coolant, (2) single foot switches, barfeed interface, chip conveyor interface, hydraulic collet closer main spindle, 3-position stack light, manual guide i,.000010 /.00010mm resolution control, spindle chiller. 460 volts, 49.9 FLA, 39.76 kva, 3-phase/50-60 Hz T 42 HP S Includes: sub spindle, block type static top plate, 16C collet ready main & sub spindle, air blast main & sub spindle, parts catcher w/conveyor main & sub spindle, 187 psi through tool coolant, through sub spindle coolant, sub spindle part ejector, pneumatic sub spindle collet closer, (2) single foot switches, barfeed interface, chip conveyor interface, hydraulic collet closer main spindle, 3-position stack light, manual guide i,.000010 /.00010mm resolution control, spindle chiller. 460 volts, 74.6 FLA, 59.44 kva, 3-phase/50-60 Hz T 42 HP MS Includes: BMT-45 live tooling top plate, c-axis main & sub spindle, 16C collet ready main & sub spindle, air blast main & sub spindle, parts catcher w/conveyor main & sub spindle, 187 psi through tool coolant, through sub spindle coolant, sub spindle part ejector, pneumatic sub spindle collet closer, (2) single foot switches, barfeed interface, chip conveyor interface, hydraulic collet closer main spindle, 3-position stack light, manual guide i,.000010 /.00010mm resolution control, spindle chiller. 460 volts, 76 FLA, 60.55 kva, 3-phase/50-60 Hz

T 42 HP MSY Includes: BMT-45 live tooling top plate, c-axis main & sub spindle, y-axis, 16C collet ready main & sub spindle, air blast main & sub spindle, parts catcher w/conveyor main & sub spindle, 187 psi through tool coolant, through sub spindle coolant, sub spindle part ejector, pneumatic sub spindle collet closer, (2) single foot switches, barfeed interface, chip conveyor interface, hydraulic collet closer main spindle, 3-position stack light, manual guide i,.00001 /.0001mm resolution control, spindle chiller. 460 volts, 77 FLA, 61.35 kva, 3-phase/50-60 Hz SUPER-PRECISION Package Configurations T- 42 SP Includes: block type static top plate, 16C collet ready spindle, spindle air blast, parts catcher w/conveyor, 187 psi through tool coolant, (1) single foot switch, barfeed interface, chip conveyor interface, coolant chiller, hydraulic collet closer, 3-position stack light, linear glass scales (X, Z),.000010 /.00010mm resolution control, manual guide i, spindle chiller. 460 volts, 50.5 FLA, 40.23 kva, 3-phase/50-60 Hz T- 42 SP M Includes: BMT-45 live tooling top plate, c-axis, 16C collet ready spindle, spindle air blast, parts catcher w/conveyor, 187 psi through tool coolant, (1) single foot switches, barfeed interface, chip conveyor interface, coolant chiller, hydraulic collet closer, 3-position stack light, linear glass scales (X, Z), manual guide i..000010 /.00010mm resolution control, spindle chiller. 460 volts, 51.6 FLA, 41.11 kva, 3-phase/50-60 Hz T- 42 BB SP M Includes: BMT-45 live tooling top plate, c-axis, Big-Bore collet ready spindle, spindle air blast, parts catcher w/conveyor, 187 psi through tool coolant, (1) single foot switches, barfeed interface, chip conveyor interface, coolant chiller, hydraulic collet closer, 3-position stack light, linear glass scales (X, Z), manual guide i..000010 /.00010mm resolution control, spindle chiller. 460 volts, 51.6 FLA, 41.11 kva, 3-phase/50-60 Hz T- 42 SP T Includes: tailstock, block type static top plate, 16C collet ready spindle, spindle air blast, parts catcher w/conveyor, 187 psi through tool coolant, (2) single foot switches, barfeed interface, chip conveyor interface, coolant chiller, hydraulic collet closer, 3-position stack light, linear glass scales (X, Z), manual guide i..000010 /.00010mm resolution control, spindle chiller. 460 volts, 51.6 FLA, 41.11 kva, 3-phase/50-60 Hz T- 42 SP MT Includes: tailstock, BMT-45 live tooling top plate, c-axis, 16C collet ready spindle, spindle air blast, parts catcher w/conveyor, 187 psi through tool coolant, (2) single foot switches, barfeed interface, chip conveyor interface, coolant chiller, hydraulic collet closer, 3- position stack light, linear glass scales (X, Z) manual guide i,.000010 /.00010mm resolution control, spindle chiller. 460 volts, 53 FLA, 42.23 kva, 3-phase/50-60 Hz T- 42 SP MY Includes: BMT 45 live tooling top plate, c-axis, y-axis, 16C collet ready spindle, spindle air blast, parts catcher w/conveyor, 187 psi through tool coolant, (2) single foot switches, barfeed interface, chip conveyor interface, coolant chiller, hydraulic collet closer, 3- position stack light, linear glass scales (X, Y, Z), manual guide i,.000010 /.00010mm resolution control, spindle chiller. 460 volts, 52.9 FLA, 42.15 kva, 3-phase/50-60 Hz T- 42 SP MYT Includes: BMT-45 live tooling top plate, c-axis main, y-axis, tailstock, 16C collet ready spindle, main spindle air blast, main spindle parts catcher w/conveyor, 187 psi through tool coolant, (2) single foot switches, barfeed interface, chip conveyor interface, coolant chiller, hydraulic collet closer main spindle, 3-position stack light, linear glass scales, (X, Z, Y) manual guide i,.000010 /.00010mm resolution control, spindle chiller. 460 volts, 54 FLA, 43.02 kva, 3- phase/50-60 Hz T- 42 SP S Includes: sub spindle, block type static top plate, 16C collet ready main & sub spindle, air blast main & sub spindle, parts catcher w/conveyor main & sub spindle, 187 psi through tool coolant, through sub spindle coolant, sub spindle part ejector, pneumatic sub spindle collet closer, (2) single foot switches, barfeed interface, chip conveyor interface, coolant chiller, hydraulic collet closer main spindle, 3-position stack light, linear glass scales (X, Z), manual guide i,.000010 /.00010mm resolution control, spindle chiller. 460 volts, 78.7 FLA, 62.70 kva, 3-phase/50-60 Hz T- 42 SP MS Includes: BMT-45 live tooling top plate, c-axis main & sub spindle, 16C collet ready main & sub spindle, air blast main & sub spindle, parts catcher w/conveyor main & sub spindle, 187 psi through tool coolant, through sub spindle coolant, sub spindle part ejector, pneumatic sub spindle collet closer, (2) single foot switches, barfeed interface, chip conveyor interface, coolant chiller, hydraulic collet closer main spindle, 3-position stack light, linear glass scales (X, Z), manual guide i,.000010 /.00010mm resolution control spindle chiller. 460 volts, 80.1 FLA, 63.82 kva, 3-phase/50-60 Hz

T- 42 SP MSY Includes: BMT-45 live tooling top plate, c-axis main & sub spindle, y-axis, 16C collet ready main & sub spindle, air blast main & sub spindle, parts catcher w/conveyor main & sub spindle, 187 psi through tool coolant, through sub spindle coolant, sub spindle part ejector, pneumatic sub spindle collet closer, (2) single foot switches, barfeed interface, chip conveyor interface, coolant chiller, hydraulic collet closer main spindle, 3-position stack light, linear glass scales (X,Z,&Y), manual guide i,.000010 /.00010mm resolution control, spindle chiller. 460 volts, 81.1 FLA, 64.61 kva, 3-phase/50-60 Hz

Machine s Top Plate (Standard by Machine Model Type M versions have Live Tooling) 16-Station BMT-45 Live Tooling Top Plate with ½ Station Index Standard ¾ square 1 ¼ round shank tooling 12-Station Block Type (T-Style) Static Top Plate Standard ¾ square 1 ¼ round shank tooling 16 Station BMT-45 Static Top Plate with ½ Station Index ¾ square 1 ¼ round shank tooling Collet Closer Main Spindle Hydraulic Collet Closer Sub Spindle Pneumatic Collet Closer Machine s Sub-Spindle Part Present Detector Big Bore Main Spindle (A2-6/20C, 2 /51mm Bar Capacity) Marposs Tool Touch Probe Marposs Part Probe, Wireless Auto Door Z-Axis Linear Scale (For Non SUPER-PRECISION Machines) Chip Management Main Spindle - Thru-Spindle Coolant (for Non-Sub Spindle Machines) Main Spindle - Thru-Spindle Coolant (for Sub Spindle Machines) Chip Conveyor Right Side Discharge (Interface Included) High Pressure Coolant Electrical/Mechanical Interface Kit for MP Units (the interface is only for the MP model AT RF HE ) High Pressure Coolant Unit Coolant Chillers Coolant Chiller (Std. on SUPER-PRECISION model) Spindle Liners Hardinge Spindle Liner Kit Includes (3) steel spacers and (4) nylon bushings. Bushings will need to be bored to bar stock size. Hardinge Spindle Liner Bushing (3 required for each bar stock size) Other s Additional Maintenance Kit includes: grease for linear guideways & ballscrews, and grease gun CSA Specification (Canada) Power case air conditioner Automatic Machine Power Down (Used w/ magazine barfeed) Ready 2 Cut Standard Standard

Machine s Cont. Control s All Configurations Additional Custom Macro Variables Floating Reference Return Helical Interpolation (Std. on Y-axis Machines) Spindle Orient Main Spindle (Std. on Live Tooling Models) (Requires 2 nd Aux. Function) 2 nd Auxiliary Function (Std. on Live Tooling Models) (Requires Spindle Orient) Multiple Repetitive Cycles II (Pockets) Thread Cutting Cycle Retract Tool Offsets 200 Pair Tool Offsets 400 Pair Part Program Storage 320M (128K) (Total) No Hardware Required (Up to 250 Registered Part Programs) Part Program Storage 640M (256K) (Total) No Hardware Required (Up to 500 Registered Part Programs) Part Program Storage 1280M (512K) (Total) No Hardware Required (Up to 1000 Registered Part Programs) Part Program Storage 2560M (1MB) (Total) No Hardware Required (Up to 1000 Registered Part Programs) Part Program Storage 5120M (2MB) (Total) No Hardware Required (Up to 1000 Registered Part Programs) Part Program Storage 10240M (4MB) (Total) No Hardware Required (Up to 1000 Registered Part Programs) Additional Workpiece Coordinate SY French Language Display German Language Display Italian Language Display Spanish Language Display Chinese Language Display Polish Language Display Czech Language Display Dutch Language Display 3D Coordinate System Conversion (Y-Axis With Angular Tool) Prices listed in USD Factory installed pricing only

Machine Specifications Swing Diameter Maximum Swing Over Way Covers Work Capacities Chuck Size (Chuck Not Included) Maximum Bar Capacity Maximum Machining Diameter (BMT-45) Maximum Machining Diameter (Block Type) Maximum Machining Length w/tailstock and 6 Chuck Maximum Machining Length w/tailstock and 16 C Collet Spindle Maximum Speed Maximum Power Rating (30 minute) Maximum Torque (30 minute) Base Speed Spindle Nose Chuck Size (Chuck Not Included) Spindle Bore (not bar capacity) Spindle Center Height Spindle Reach Spindle Orient (optional) Closer Type Travels and Feedrates Maximum X-Axis Travel Maximum Z-Axis Travel Maximum Y-Axis Travel (+2.25" -1.0") Continuous X-Axis Thrust Continuous Z-Axis Thrust Continuous Y-Axis Thrust X-Axis Rapid Traverse Rates Z-Axis Rapid Traverse Rates Y-Axis Rapid Traverse Rates Hardinge BMT-45 Live Tooling Top Plate BMT-45 bi-directional Square Shank Round Shank Tooling Index Time (rotation/including clamp-unclamp) Tool Shank Diameter w/er 25 Collets Live Tooling Power Rating (15 Min Rating) Live Tooling Torque Rating (15 Min Rating) Live Tooling Max Speed Hardinge Block Type (T-Style) Static Top Plate Block Type (Static) bi-directional Square Shank (Left, Right or Inverted Tooling) Round Shank Tooling Index Time (rotation/including clamp-unclamp) 27" (685.8mm) 6" (150mm) 1.625" (42mm) (2 / 51 Big Bore ) 8.91" (226.3mm) 12.4" (315mm) 10.19" (258.8mm) 14.49" (368mm) 6000-rpm (5,000 Big Bore ) 15-hp (11 kw) 75 ft-lb (101.7 Nm) 1100-rpm A2-5 / 16 C (A2-6 / 20C Big Bore) 6" (150 mm) 1.89" (48mm) 42" (1066.8mm) 16" (406.4mm) 1.0 degree Hydraulic 6.37" (161.8mm) 16" (406.4mm) 3.25" (82.55mm) 1,695 lbs. (7,540N) 1,500 lbs. (6,672N) 1,100 lbs. (4,893N) 945-ipm (24m/min) 1200-ipm (30.5m/min) 787-ipm (20m/min) 16-station + ½ station index 3/4" (20mm) 1.25" (32mm).35/1.0 Seconds.04 -.625" (1mm - 16mm) 5-hp (3.7 kw) 25 ft-lb (33 Nm) 8,000-rpm 12-station 3/4" (20mm) 1.25" (32mm).35/1.0 Seconds Servo Driven Tailstock Morse Taper (no quill needed) MT # 4 Maximum Cutting Length 14.5" (368.3mm) Maximum Tailstock Travel 16" (406.4mm) Maximum Traverse Rate 1200-ipm (30.5m/min) Minimum Applied Force 112 lb. (0.5kN) Maximum Applied Force 1500 lb. (6.7kN)

Machine Specifications Cont. Sub Spindle Maximum Speed 6000-rpm Maximum Power Rating (30 minute) 15-hp (11 kw) Maximum Torque (30 minute) 75 ft-lb (101.7 Nm) Base Speed 750-rpm Spindle Nose A2-5/16C Chuck Size (Chuck Not Included) 6" (150mm) Maximum 16C Collet Capacity 1.625" (42mm) Spindle Bore (not bar capacity) 1.89" (48mm) Spindle Center Height 42" (1066.8mm) Spindle Reach 16" (406.4mm) Spindle Orient (optional) 1.0 degree Closer Type Pneumatic Maximum Travel 16" (406.4mm) Maximum Traverse Rate 1200-ipm (30.5m/min) Maximum Distance from Sub to Main Spindle Face 16.5" (419.1mm) Minimum Distance from Sub to Main Spindle Face.5" (12.7mm) Coolant Facilities Coolant Capacity Maximum Pressure Coolant Flow Rate (Per-Minute) High Pressure Through Turret () High Performance Inspection Specifications: Part Surface Finish Overall Axis Repeatability (X, Z) Turret Indexing Repeatability SUPER-PRECISION Inspection Specifications: Part Surface Finish Overall Axis Repeatability (X, Z) Continuous Part Accuracy (Total variation on dia.) Part Roundness Total Variation on Diameter Turret Indexing Repeatability Power Requirements (MSY Configuration) Maximum kva Rating Volts/Maximum Full Load Amps Phase/Hertz Miscellaneous Machine Lubrication Machine Communication Machine Length Machine Depth Machine Height Approx. Machine Weight Approx. Shipping Weight Air Requirement 55 gallon (208 liter) 187 psi (12.9 bar) 6.75 gallon (25.48 liters) 1,000 psi (68.95 bar) 12 micro-inch /.30 micron.00005 /1.27 micron.000060 / 1.52 micron 6 micro-inch /.15 micron.00003 /.76 micron.00012 / 3 micron.00001 /.254 micron.00012 / 3 micron.000060 / 1.52 micron 82 kva 460 volt/103 FLA 3-phase/50-60 Hz Grease RS-232-C, Embedded Ethernet 98" (2489.2mm) 83.5" (2121mm) 82.25" (2089mm) 13100 lbs (5940 kg) 13600 lbs (6170 kg) 70-90 psi (4.8-6.2 bar) Inspected to ISO 230-2 standard. Actual results may be greater or less than those listed due to a number of factors including but not limited to speeds, feeds, tooling, machine maintenance, coolant material, ambient temperature and type of machine foundation.

All features, benefits and specifications are subject to change. Hardinge Inc. is not responsible for any typographical errors, omissions or misprints.

Fanuc 31i Control Specifications General Pendent-mounted Full Control 10.4 LCD Display Graphic Display Embedded Ethernet RS-232C Communication Ports Program Resolution.00001" (.0001mm) Tool Offset Capability.00001" (.0001mm)¹ Tool Offsets with Geom & Wear (99) o Tool Offsets with Geom & Wear (200/400) Absolute Encoders pair Inch/Metric Selection by G-Code 160 Meters (64Kbyte) Part Program Storage Part Program Storage (128/256/512KB, 1/2/4MB) Programming Functions Absolute/Incremental Programming Additional Custom Macro Variables Alarm Display Auto Acceleration/Deceleration Auto Coordinate System Setting Background Editing Canned Cycles (Drilling) Chamfer/Corner Rounding Circular Interpolation by R Programming Constant Surface Speed Programming Continuous Thread Cutting Coordinate System Setting (G50) Custom Macro B Decimal Point Programming Diameter/Radius Programming Direct Drawing Dimension Programming Display Position, Program, Alarm, History, Operator Message, Speed, T-Code Extended Part Program Edit (copy/replace) External Workpiece Number Search Hardinge Safe Start Format Helical Interpolation (for Y-Axis) o Helical Interpolation (for Non - Y-Axis) Help Screen Input of Offset Values by (G10) Interpolation (Linear/Circular) Standard ¹SUPER-PRECISION Machines only. Programming Functions (continued) MPG Manual Pulse Generator Manual Guide i with full color display Multiple Repetitive Cycles I (Turning) Multiple Repetitive Cycles II (Pocketing) Multi Spindle Control Program Number Search Programmable Parameter Input Reference Point Return Registered Part Program Storage (125) Rigid Tapping o Spindle Orient Main & Sub (Std. on Live Tooling Models) Spindle Synchronization (Main & Sub) Sequence Number Search Single Block Operation Skip Function G31 Stored Stroke Check 2 & 3 Sub Program Call (10 fold nested) Thread Cutting Retract Thread Cutting 99 Offset Pairs Tool Nose Radius Compensation (Geom/Wear) o Variable Lead Thread Cutting Workpiece Coordinate System (G52-G59) Miscellaneous Actual Cutting Speed and T-Code Display Dual Check Safety (Spindle Speed) English French/German/Italian/Spanish Language Chinese in Fanuc menus only Flash Card Capability PCMICA (up to 1-GB) o Floating Reference Point Return Full Keyboard Ladder Diagram Display Mechanical Run Meter One-Degree Spindle Orient Program Protect Run Time Parts Count Self-Diagnostic Function Y-Axis offset - 99 pair (for Y-Axis) 3D Coordinate System Conversion (Y-axis with angular Tool)

T- 42 Floor Plan

Investment Summary for ABMNameAlpha Quote Number: All Prices in: SOHCurrencyCodeFrom Qty UOM Description Unit Price Extended Total Investment: $XXXX FOB Point: Terms of Payment: Delivery: Taxes: Validity: Warranty: Terms and Conditions: Shipping Point (miscellaneous vendor items, i.e., barfeeds, rotary tables, will generally be shipped directly from the manufacturer) All orders are subject to Hardinge Credit Approval. For precise delivery time please contact your local representative. Any applicable taxes are not included in this quote and will be extra if required This quotation is valid for thirty (30) days from date of issue. See Terms and Conditions All Hardinge sales are subject to Hardinge Inc. s standard terms and conditions of sale, a copy of which is attached to this quotation. Any terms and conditions originating with the buyer are herby expressly rejected and shall not become part of the contract between the buyer and Hardinge Inc. unless specifically accepted in writing by a duly authorized officer of Hardinge Inc. All features, benefits and specifications are subject to change. Hardinge Inc. is not responsible for any typographical errors, omissions or misprints. Total from Previous Page $ XXXX Qty Item # Description Price Ext Price Total Hardinge Representative Date Buyer Authorization Date Purchase Order Number