High Current Density Surface Mount Ultrafast Rectifiers esmp Series PRIMARY CHARACTERISTICS I F(AV).0 A V RRM 0 V, 50 V, 200 V t rr 25 ns V F 0.90 V T J max. 75 C Package Diode variations Single die FEATURES Very low profile - typical height of.0 mm Available Ideal for automated placement Glass passivated pellet chip junction Ultrafast recovery times for high frequency Low forward voltage drop, low power loss Low thermal resistance Meets MSL level per J-STD-020, LF maximum peak of 260 C AEC-Q qualified Material categorization: for definitions of compliance please see www.vishay.com/doc?9992 TYPICAL APPLICATIONS For use in secondary rectification and freewheeling for ultrafast switching speeds of AC/AC and DC/DC converters in high temperature conditions for both consumer and automotive applications. MECHANICAL DATA Case: Molding compound meets UL 94 V-0 flammability rating Base P/N-M3 - halogen-free, RoHS-compliant, and commercial grade Base P/NHM3 - halogen-free, RoHS-compliant, and automotive grade Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD 22-B2 M3 suffix meets JESD 20 class 2 whisker test, HM3 suffix meets JESD 20 class 2 whisker test Polarity: Color band denotes cathode end MAXIMUM RATINGS (T A = 25 C unless otherwise noted) PARAMETER SYMBOL ESHPB ESHPC ESHPD UNIT Device marking code PB PC PD Maximum repetitive peak reverse voltage V RRM 0 50 200 V Maximum average forward rectified current (fig. ) I F(AV).0 A Peak forward surge current ms single half sine-wave superimposed on rated load I FSM 50 A Operating junction and storage temperature range T J, T STG -55 to +75 C Revision: 6-Oct-5 Document Number: 88895 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?900
ELECTRICAL CHARACTERISTICS (T A = 25 C unless otherwise noted) PARAMETER TEST CONDITIONS SYMBOL VALUE UNIT Maximum instantaneous forward voltage Notes () Pulse test: 300 μs pulse width, % duty cycle (2) Pulse test: Pulse width 40 ms I F = 0.7 A 0.86 V () F I F = A 0.90 Maximum reverse current at rated V R voltage.0 I (2) R T J = 25 C 25 μa Maximum reverse current V R = 20 V T J = 50 C I R 50 μa Maximum reverse recovery time I F = 0.5 A, I R = A, I rr = 0.25 A t rr 25 ns Typical reverse recovery time I F =.0 A, V R = 30 V, 25 t di/dt = 50 A/μs, I rr = % I rr RM T J = 0 C 35 I Typical stored charge F =.0 A, V R = 30 V, Q di/dt = 50 A/μs, I rr = % I rr nc RM T J = 0 C 5 Typical junction capacitance 4.0 V, MHz C J 25 pf V ns THERMAL CHARACTERISTICS (T A = 25 C unless otherwise noted) PARAMETER SYMBOL ESHPB ESHPC ESHPD UNIT Typical thermal resistance Notes () Thermal resistance from junction to ambient on free air (2) Mounted on 6 mm x 6 mm pad size from junction to mount R JA () 5 R JM (2) 5 C/W ORDERING INFORMATION (Example) PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE ESHPB-M3/84A 0.024 84A 3000 7" diameter plastic tape and reel ESHPB-M3/85A 0.024 85A 000 3" diameter plastic tape and reel ESHPBHM3/84A () 0.024 84A 3000 7" diameter plastic tape and reel ESHPBHM3/85A () 0.024 85A 000 3" diameter plastic tape and reel Note () Automotive grade Revision: 6-Oct-5 2 Document Number: 88895 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?900
Average Forward Rectified Current (A) Transient Thermal Impedance ( C/W) Junction Capacitance (pf) www.vishay.com RATINGS AND CHARACTERISTICS CURVES (T A = 25 C unless otherwise noted).2 00.0 0.8 0.6 0.4 0.2 T L Measured at the Cathode Band Terminal Instantaneous Reverse Current (µa) 0 0. T J = 75 C T J = 50 C T J = 25 C 0 95 5 5 25 35 45 55 65 Lead Temperature ( C) 75 0.0 20 30 40 50 60 70 80 90 0 Percent of Rated Peak Reverse Voltage (%) Fig. - Forward Current Derating Curve Fig. 4 - Typical Reverse Leakage Characteristics 50 00 Peak Forward Surge Current (A) 40 30 20 0 0 0 Number of Cycles at 50 Hz 0. 0 Reverse Voltage (V) Fig. 2 - Maximum Non-Repetitive Peak Forward Surge Current Fig. 5 - Typical Junction Capacitance 0 00 Instantaneous Forward Current (A) T J = 75 C T J = 50 C 0. T J = 25 C 0.0 0.2 0.4 0.6 0.8.0.2.4.6 Instantaneous Forward Voltage (V) Fig. 3 - Typical Instantaneous Forward Characteristics 0 0.0 0. 0 t - Pulse Duration (s) Fig. 6 - Typical Transient Thermal Impedance Revision: 6-Oct-5 3 Document Number: 88895 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?900
PACKAGE OUTLINE DIMENSIONS in inches (millimeters) Cathode Band 0.02 (0.30) REF. 0.086 (2.8) 0.074 (.88) 0.053 (.35) 0.04 (.05) 0.036 (0.9) 0.024 (0.6) 0.03 (0.35) 0.004 (0.) 0.42 (3.6) 0.26 (3.9) 0.58 (4.00) 0.46 (3.70) 0.02 (0.30) 0.000 (0.00) 0.08 (0.45) 0.006 (0.5) 0.045 (.5) 0.033 (0.85) 0.0 (2.54) 0.3 (2.60) 0.087 (2.20) 0.5 (2.67) 0.025 0.030 (0.635) (0.762) 0.032 (0.80) 0.06 (0.40) 0.050 (.27) Revision: 6-Oct-5 4 Document Number: 88895 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?900
Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, Vishay ), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer s technical experts. Product specifications do not expand or otherwise modify Vishay s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. 207 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 08-Feb-7 Document Number: 900