Vignette Modern Roman Shades Shades roll, stack and glide with no exposed rear cords for a clean exterior appearance and enhanced child safety. 16 fabrics, 102 fabric/color combinations, three opacity options and color-coordinated hardware and cords. Matching fabric-covered headrail, mid-rail and bottom rail are standard. THREE UNIQUE STYLES Traditional Style (rolls): 4" full folds roll up into headrail. 6" flat folds roll up into headrail. Uses standard headrail. Tiered Style (stacks): 4" full folds stack up or down. Uses low-profile headrail. Traversed with Vertiglide Style (glides): 4" full folds stack vertically. Uses Traversed headrail. OPERATING SYSTEMS LiteRise Cordless manual operation offers enhanced child and pet safety. UltraGlide Single retractable cord stays a constant length and offers enhanced child and pet safety. EasyRise Continuous cord loop system. PowerView Motorization Advanced motorized operation with the simple press of a button. Traversed Vertical solution for expansive windows and doors. DESIGN OPTIONS Tiered Architella Rear fabric air pockets trap air for enhanced energy efficiency and sound absorption. Top-Down/Bottom-Up Shades operate from the top-down, bottom-up or both. Two-On-One Headrail Two shades share the same headrail but operate independently. Specialty Shapes Non-operable shades remain in the lowered position. Room Darkening Ideal for bedrooms and media rooms. Natural Streetside back fabric Option available on Newport Linen and Grasslands Collection fabrics only. Accents by the Yard cut yardage Perfect for bedding, pillows and coordinating accessories. COORDINATION PROGRAM See The Whole House Solution tab at the back of the Reference Guide for information on coordinating Vignette shades with Luminette Privacy Sheers. CONTENTS Size Standards... VI-2 Operating Systems... VI-13 Pricing... VI-14 Product Specifications... VI-25 Design and Operation... VI-37 PowerView Motorization...VI-29, VI-34 Fabrics and Accents by the Yard... VI-41 LiteRise VI-25 VI-30 VI-33 EasyRise VI-27 VI-28 VI-32 VI-33 Traversed VI-35 Two-On-One Headrail VI-25 VI-26 VI-27 VI-30 VI-32 VI-34 UltraGlide VI-26 VI-28 VI-31 VI-33 PowerView VI-29 VI-34 Top-Down/Bottom-Up VI-28 VI-30 VI-31 VI-32 VI-34 Specialty Shapes VI-36 - -. VI-1
Size Standards HOW TO USE THE SIZE STANDARDS CHARTS The Size Standards charts are designed to be a quick reference to size standards, price charts and where to find further product specifications. Price charts are referenced by chart number next to the fabric style and further product specifications are referenced by page number under the application. Additional information that may be needed is bulleted at the end of the charts. Important: shade dimensions must be equal to or less than the maximum dimensions (width, height and area) and equal to or greater than the minimum dimensions (width and height) to be within specification guidelines. There are two types of Size Standards charts for Vignette Modern Roman Shades. In the width-based charts, such as the chart for Traditional Style shades on page VI-5, maximum shade height varies with shade width. Round the measured width up to the nearest width on the chart and then follow that column down to find the maximum height for the desired fabric style. In the application-based charts, such as the chart for Tiered Style and Traversed Style shades on pages VI-8 and VI-9, maximum width and height do not vary. Simply find the desired application across the top row and then follow that column down to the correct fabric row. Width-Based Width To: TRADITIONAL STYLE SHADES 6" FLAT FOLD UltraGlide (VI-26) and EasyRise (VI-27) 72" 78" 88" 96" 72" 62" 78" 72" 120" 72" 62" 78" 72" 120" 72" 62" 78" 72" 120" 72" 62" 78" 72" 120" 72" 62" Application-Based LiteRise VI-29 TIERED STYLE SHADES 4" FULL FOLD UltraGlide VI-30 EasyRise VI-31 LiteRise Top-Down/ Bottom-Up VI-29 UltraGlide Top-Down/ Bottom-Up VI-30 EasyRise Top-Down/ Bottom-Up VI-31 THREE STYLES The three styles in the Vignette Modern Roman Shades product line are Traditional, Tiered and Traversed. The styles are illustrated below, with page numbers where their respective size standards can be found. Traditional Style Rolls 4" Full Fold 6" Flat Fold Tiered Style Stacks 4" Full Fold only Traversed Style Glides 4" Full Fold only Single Panel Shades...VI-3, 4 Two-On-One Headrail...VI-3, 5 PowerView Motorization...VI-6 Specialty Shapes...VI-7 Single Panel Shades...VI-3, 5 Two-On-One Headrail...VI-3, 5 PowerView...VI-7 Specialty Shapes...VI-7 Single Panel Shades...VI-8, 9 PowerView...VI-10, 11 Two-On-One Headrail...VI-12 Architella Shades...VI-12 Architella PowerView...VI-12 Traversed...VI-8, 9 VI-2 -. -
Size Standards TRADITIONAL STYLE SHADES LITERISE SIZE STANDARDS 4" FULL FOLD (VI-25) Maximum Height Per Width Width To: 72" 78" Width To: 72" 78" L51 BROOKLYN TWEED (Price Chart 3) 72" 72" 72" Z51 BROOKLYN TWEED ROOM DARKENING (Price Chart 6) 66" 66" 66" S49L DRAKE (Price Chart 3) Z49L DRAKE ROOM DARKENING (Price Chart 6) M45 ETCHED (Price Chart 3) Z45 ETCHED ROOM DARKENING (Price Chart 6) L9 HEATHER (Price Chart 2) Z23 HEATHER ROOM DARKENING (Price Chart 5) P4 INDIA SILK (Price Chart 3) Z43 INDIA SILK ROOM DARKENING (Price Chart 6) L52 JEWELSTONE (Price Chart 3) Z52 JEWELSTONE ROOM DARKENING (Price Chart 6) J6 LINEN WEAVE (Price Chart 2) Z18 LINEN WEAVE ROOM DARKENING (Price Chart 5) J47 NEWPORT LINEN (Price Chart 3) J47C = Natural Streetside Back Fabric Z47 NEWPORT LINEN ROOM DARKENING (Price Chart 6) T6 PAMPA (Price Chart 3) T6C = Natural Streetside Back Fabric 78" Z37 PAMPA ROOM DARKENING (Price Chart 6) 78" 66" 66" T8 PRAIRIE (Price Chart 3) T8C = Natural Streetside Back Fabric 78" Z39 PRAIRIE ROOM DARKENING (Price Chart 6) 78" 66" 66" T46 SAHARA (Price Chart 3) 78" Z46 SAHARA ROOM DARKENING (Price Chart 6) 78" 66" 66" B3 SATIN WEAVE (Price Chart 1) Z14 SATIN WEAVE ROOM DARKENING (Price Chart 4) T4 SAVANNAH (Price Chart 3) T4C = Natural Streetside Back Fabric 78" Z35 SAVANNAH ROOM DARKENING (Price Chart 6) 78" 66" 66" M4 SHANTUNG (Price Chart 2) Z41 SHANTUNG ROOM DARKENING (Price Chart 5) Q2 SHEER LINEN (Price Chart 2) Z27 SHEER LINEN ROOM DARKENING (Price Chart 5) T48 SRI LANKA (Price Chart 3) 78" Z48 SRI LANKA ROOM DARKENING (Price Chart 6) 78" 66" 66" SIZE MINIMUMS Width and 12" TRADITIONAL STYLE SHADES LITERISE SIZE STANDARDS 6" FLAT FOLD (VI-25) Maximum Height Per Width Width To: 72" 78" Width To: 72" 78" FL51 BROOKLYN TWEED (Price Chart 3) FZ51 BROOKLYN TWEED ROOM DARKENING (Price Chart 6) FS49 DRAKE (Price Chart 3) FZ49 DRAKE ROOM DARKENING (Price Chart 6) FM45 ETCHED (Price Chart 3) FZ45 ETCHED ROOM DARKENING (Price Chart 6) FL8 HEATHER (Price Chart 2) FZ10 HEATHER ROOM DARKENING (Price Chart 5) FP3 INDIA SILK (Price Chart 3) FZ42 INDIA SILK ROOM DARKENING (Price Chart 6) FL52 JEWELSTONE (Price Chart 3) FZ52 JEWELSTONE ROOM DARKENING (Price Chart 6) FJ5 LINEN WEAVE (Price Chart 2) FZ5 LINEN WEAVE ROOM DARKENING (Price Chart 5) FJ47 NEWPORT LINEN (Price Chart 3) FJ47C = Natural Streetside Back Fabric FZ47 NEWPORT LINEN ROOM DARKENING (Price Chart 6) FT6 PAMPA (Price Chart 3) FT6C = Natural Streetside Back Fabric 78" FZ37 PAMPA ROOM DARKENING (Price Chart 6) 66" 66" FT8 PRAIRIE (Price Chart 3) FT8C = Natural Streetside Back Fabric 78" FZ39 PRAIRIE ROOM DARKENING (Price Chart 6) 66" 66" FT46 SAHARA (Price Chart 3) 78" FZ46 SAHARA ROOM DARKENING (Price Chart 6) 66" 66" FB2 SATIN WEAVE (Price Chart 1) FZ1 SATIN WEAVE ROOM DARKENING (Price Chart 4) FT4 SAVANNAH (Price Chart 3) FT4C = Natural Streetside Back Fabric 78" FZ35 SAVANNAH ROOM DARKENING (Price Chart 6) 66" 66" FM3 SHANTUNG (Price Chart 2) FZ40 SHANTUNG ROOM DARKENING (Price Chart 5) FQ1 SHEER LINEN (Price Chart 2) FZ30 SHEER LINEN ROOM DARKENING (Price Chart 5) FT48 SRI LANKA (Price Chart 3) 78" FZ48 SRI LANKA ROOM DARKENING (Price Chart 6) 66" 66" SIZE MINIMUMS Width and 12" Notes: Traditional Style Top-Down/Bottom-Up LiteRise shades are not available. Maximum ordered width for end (EB) mount shades is 48". SIZE STANDARDS TRADITIONAL LITERISE TWO-ON-ONE HEADRAIL SHADES (VI-25) 4" FULL FOLD and 6" FLAT FOLD Maximum Overall Width 140" Maximum Panel Width and Height See chart above. Subtract 1" from maximum single panel widths. Minimum Overall Width 36" Minimum Panel Width 18" Minimum Height 12" Notes: Space between fabric panels is approximately 3. For unequal panel orders, the smaller panel must be at least one-third of the measured width of the larger panel. - -. VI-3
Size Standards SIZE STANDARDS Maximum Height Per Width TRADITIONAL STYLE SHADES 4" FULL FOLD UltraGlide (VI-26), EasyRise (VI-27) and Top-Down/Bottom-Up (VI-28) Width To: 72" 78" 88" 96" Width To: 72" 78" 88" 96" BROOKLYN TWEED (Price Chart 3) BROOKLYN TWEED ROOM DARKENING (Price Chart 6) L51 Standard Shades 88" 66" 66" 66" 66" Z51 Standard Shades 66" 66" 66" L51 Top-Down/Bottom-Up 72" 66" 66" 66" 66" Z51E Top-Down/Bottom-Up 66" 66" 66" DRAKE (Price Chart 3) DRAKE ROOM DARKENING (Price Chart 6) S49L Standard Shades 72" 66" Z49L Standard Shades 72" S49L Top-Down/Bottom-Up 72" 66" Z49E Top-Down/Bottom-Up 66" 66" 66" ETCHED (Price Chart 3) ETCHED ROOM DARKENING (Price Chart 6) M45 Standard Shades 72" 66" Z45 Standard Shades 72" M45 Top-Down/Bottom-Up 72" 66" Z45E Top-Down/Bottom-Up 78" 78" 78" HEATHER (Price Chart 2) HEATHER ROOM DARKENING (Price Chart 5) L9 Standard Shades 72" 66" Z23 Standard Shades 72" L9 Top-Down/Bottom-Up 96" 72" 66" Z23E Top-Down/Bottom-Up 78" 78" 78" INDIA SILK (Price Chart 3) INDIA SILK ROOM DARKENING (Price Chart 6) P4 Standard Shades 72" 66" Z43 Standard Shades 72" P4 Top-Down/Bottom-Up 72" 66" Z43E Top-Down/Bottom-Up 78" 78" 78" JEWELSTONE (Price Chart 3) JEWELSTONE ROOM DARKENING (Price Chart 6) L52 Standard Shades 72" 66" Z52 Standard Shades 72" L52 Top-Down/Bottom-Up 72" 66" Z52E Top-Down/Bottom-Up 66" 66" 66" LINEN WEAVE (Price Chart 2) LINEN WEAVE ROOM DARKENING (Price Chart 5) J6 Standard Shades 72" 66" Z18 Standard Shades 72" J6 Top-Down/Bottom-Up 72" 66" Z18E Top-Down/Bottom-Up 78" 78" 78" NEWPORT LINEN (Price Chart 3) NEWPORT LINEN ROOM DARKENING (Price Chart 6) J47 J47C* Standard Shades 72" 66" Z47 Standard Shades 72" J47 J47C* Top-Down/Bottom-Up 96" 72" 66" Z47E Top-Down/Bottom-Up 78" 78" 78" PAMPA (Price Chart 3) PAMPA ROOM DARKENING (Price Chart 6) T6 T6C* Standard Shades 88" 78" 72" 60" Z37 Standard Shades 78" 66" 66" 66" T6 T6C* Top-Down/Bottom-Up 78" 78" 78" 72" 60" Z37E Top-Down/Bottom-Up 66" 66" 66" PRAIRIE (Price Chart 3) PRAIRIE ROOM DARKENING (Price Chart 6) T8 T8C* Standard Shades 88" 78" 72" 60" Z39 Standard Shades 78" 66" 66" 66" T8 T8C* Top-Down/Bottom-Up 78" 78" 78" 72" 60" Z39E Top-Down/Bottom-Up 66" 66" 66" SAHARA (Price Chart 3) SAHARA ROOM DARKENING (Price Chart 6) T46 Standard Shades 88" 78" 72" 60" Z46 Standard Shades 78" 66" 66" 66" T46 Top-Down/Bottom-Up 72" 72" 72" 72" 60" Z46E Top-Down/Bottom-Up 60" 60" 60" SATIN WEAVE (Price Chart 1) SATIN WEAVE ROOM DARKENING (Price Chart 4) B3 Standard Shades 72" 66" Z14 Standard Shades 72" B3 Top-Down/Bottom-Up 96" 72" 66" Z14E Top-Down/Bottom-Up 78" 78" 78" SAVANNAH (Price Chart 3) SAVANNAH ROOM DARKENING (Price Chart 6) T4 T4C* Standard Shades 88" 78" 72" 60" Z35 Standard Shades 78" 66" 66" 66" T4 T4C* Top-Down/Bottom-Up 78" 78" 78" 72" 60" Z35E Top-Down/Bottom-Up 66" 66" 66" SHANTUNG (Price Chart 2) SHANTUNG ROOM DARKENING (Price Chart 5) M4 Standard Shades 72" 66" Z41 Standard Shades 72" M4 Top-Down/Bottom-Up 96" 72" 66" Z41E Top-Down/Bottom-Up 78" 78" 78" SHEER LINEN (Price Chart 2) SHEER LINEN ROOM DARKENING (Price Chart 5) Q2 Standard Shades 72" 66" Z27 Standard Shades 72" Q2 Top-Down/Bottom-Up 96" 72" 66" Z27E Top-Down/Bottom-Up 78" 78" 78" SRI LANKA (Price Chart 3) SRI LANKA ROOM DARKENING (Price Chart 6) T48 Standard Shades 88" 78" 72" 60" Z48 Standard Shades 78" 66" 66" 66" T48 Top-Down/Bottom-Up 78" 78" 78" 72" 60" Z48E Top-Down/Bottom-Up 66" 66" 66" SIZE MINIMUMS UltraGlide Minimum 12" UltraGlide Minimum 12" EasyRise Minimum 12" EasyRise Minimum 16" * Fabric code for Natural Streetside back fabric option. Notes: Traditional Top-Down/Bottom-Up shades operate from the top-down or bottom-up, but not both at the same time. Top-Down/Bottom-Up fabric stack height in the top-down position equals up to 20% of the shade height. Maximum ordered width for Sahara and Sri Lanka light-filtering shades is. Maximum ordered width for end (EB) mount shades is 48". Top-Down/Bottom-Up Minimum 18" Top-Down/Bottom-Up Minimum 24" VI-4 -. -
Size Standards SIZE STANDARDS Maximum Height Per Width TRADITIONAL STYLE SHADES 6" FLAT FOLD UltraGlide (VI-26) and EasyRise (VI-27) Width To: 72" 78" 88" 96" FL51 BROOKLYN TWEED (Price Chart 3) 72" 62" FZ51 BROOKLYN TWEED ROOM DARKENING (Price Chart 6) 78" 72" FS49 DRAKE (Price Chart 3) 120" 72" 62" FZ49 DRAKE ROOM DARKENING (Price Chart 6) 78" 72" FM45 ETCHED (Price Chart 3) 120" 72" 62" FZ45 ETCHED ROOM DARKENING (Price Chart 6) 78" 72" FL8 HEATHER (Price Chart 2) 120" 72" 62" FZ10 HEATHER ROOM DARKENING (Price Chart 5) 78" 72" FP3 INDIA SILK (Price Chart 3) 120" 72" 62" FZ42 INDIA SILK ROOM DARKENING (Price Chart 6) 78" 72" FL52 JEWELSTONE (Price Chart 3) 120" 72" 62" FZ52 JEWELSTONE ROOM DARKENING (Price Chart 6) 78" 72" FJ5 LINEN WEAVE (Price Chart 2) 120" 72" 62" FZ5 LINEN WEAVE ROOM DARKENING (Price Chart 5) 78" 72" FJ47 FJ47C* NEWPORT LINEN (Price Chart 3) 120" 72" 62" FZ47 NEWPORT LINEN ROOM DARKENING (Price Chart 6) 78" 72" FT6 FT6C* PAMPA (Price Chart 3) 78" 72" 60" FZ37 PAMPA ROOM DARKENING (Price Chart 6) 66" 66" 66" FT8 FT8C* PRAIRIE (Price Chart 3) 78" 72" 60" FZ39 PRAIRIE ROOM DARKENING (Price Chart 6) 66" 66" 66" FT46 SAHARA (Price Chart 3) 78" 72" 60" FZ46 SAHARA ROOM DARKENING (Price Chart 6) 66" 66" 66" FB2 SATIN WEAVE (Price Chart 1) 120" 72" 62" FZ1 SATIN WEAVE ROOM DARKENING (Price Chart 4) 78" 72" FT4 FT4C* SAVANNAH (Price Chart 3) 78" 72" 60" FZ35 SAVANNAH ROOM DARKENING (Price Chart 6) 66" 66" 66" FM3 SHANTUNG (Price Chart 2) 120" 72" 62" FZ40 SHANTUNG ROOM DARKENING (Price Chart 5) 78" 72" FQ1 SHEER LINEN (Price Chart 2) 120" 72" 62" FZ30 SHEER LINEN ROOM DARKENING (Price Chart 5) 78" 72" FT48 SRI LANKA (Price Chart 3) 78" 72" 60" FZ48 SRI LANKA ROOM DARKENING (Price Chart 6) 66" 66" 66" SIZE STANDARDS SIZE MINIMUMS * Fabric code for Natural Streetside back fabric option. Notes: Top-Down/Bottom-Up shades are not available in 6" flat fold fabrics. Maximum ordered width for Sahara and Sri Lanka light-filtering shades is. Maximum ordered width for end (EB) mount shades is 48". UltraGlide Minimum 12" UltraGlide Minimum 12" TRADITIONAL TWO-ON-ONE HEADRAIL SHADES 4" FULL FOLD and 6" FLAT FOLD EasyRise Minimum 12" EasyRise Minimum 16" UltraGlide (VI-26) EasyRise (VI-27) Maximum Overall Width 140" 140" Maximum Panel Width and Height See charts on pages VI-4 and VI-5. See charts on pages VI-4 and VI-5. Minimum Overall Width 36" 36" Minimum Panel Width 18" 18" Minimum Height 12" 16" Notes: Space between fabric panels is approximately 3. For unequal panel orders, the smaller panel must be at least one-third of the measured width of the larger panel. Maximum panel width for Sahara and Sri Lanka light-filtering shades is. - -. VI-5
Size Standards SIZE STANDARDS Maximum Height Per Width TRADITIONAL STYLE SHADES POWERVIEW MOTORIZATION 4" FULL FOLD (VI-29) Width To: 54" 60" 66" 72" 78" 88" 96" L51 BROOKLYN TWEED (Price Chart 3) 76" 76" 76" 76" 64" 64" 64" 62" Z51 BROOKLYN TWEED ROOM DARKENING (Price Chart 6) 68" 68" 68" 62" 62" 62" 62" S49L DRAKE (Price Chart 3) 96" 96" 96" 96" 78" 72" 62" Z49L DRAKE ROOM DARKENING (Price Chart 6) 78" 72" 66" 60" M45 ETCHED (Price Chart 3) 96" 96" 96" 96" 78" 72" 62" Z45 ETCHED ROOM DARKENING (Price Chart 6) 78" 72" 66" 60" L9 HEATHER (Price Chart 2) 96" 96" 96" 96" 78" 72" 62" Z23 HEATHER ROOM DARKENING (Price Chart 5) 78" 72" 66" 60" P4 INDIA SILK (Price Chart 3) 96" 96" 96" 96" 78" 72" 62" Z43 INDIA SILK ROOM DARKENING (Price Chart 6) 78" 72" 66" 60" L52 JEWELSTONE (Price Chart 3) 96" 96" 96" 96" 78" 72" 62" Z52 JEWELSTONE ROOM DARKENING (Price Chart 6) 78" 72" 66" 60" J6 LINEN WEAVE (Price Chart 2) 96" 96" 96" 96" 78" 72" 62" Z18 LINEN WEAVE ROOM DARKENING (Price Chart 5) 78" 72" 66" 60" J47 J47C* NEWPORT LINEN (Price Chart 3) 96" 96" 96" 96" 78" 72" 62" Z47 NEWPORT LINEN ROOM DARKENING (Price Chart 6) 78" 72" 66" 60" T6 T6C* PAMPA (Price Chart 3) 78" 78" 78" 78" 72" 66" 60" Z37 PAMPA ROOM DARKENING (Price Chart 6) 72" 72" 72" 66" 66" 60" 60" T8 T8C* PRAIRIE (Price Chart 3) 78" 78" 78" 78" 72" 66" 60" Z39 PRAIRIE ROOM DARKENING (Price Chart 6) 72" 72" 72" 66" 66" 60" 60" T46 SAHARA (Price Chart 3) 78" 78" 78" 78" 72" 66" 60" Z46 SAHARA ROOM DARKENING (Price Chart 6) 72" 72" 72" 66" 66" 60" 60" B3 SATIN WEAVE (Price Chart 1) 96" 96" 96" 96" 78" 72" 62" Z14 SATIN WEAVE ROOM DARKENING (Price Chart 4) 78" 72" 66" 60" T4 T4C* SAVANNAH (Price Chart 3) 78" 78" 78" 78" 72" 66" 60" Z35 SAVANNAH ROOM DARKENING (Price Chart 6) 72" 72" 72" 66" 66" 60" 60" M4 SHANTUNG (Price Chart 2) 96" 96" 96" 96" 78" 72" 62" Z41 SHANTUNG ROOM DARKENING (Price Chart 5) 78" 72" 66" 60" Q2 SHEER LINEN (Price Chart 2) 96" 96" 96" 96" 78" 72" 62" Z27 SHEER LINEN ROOM DARKENING (Price Chart 5) 78" 72" 66" 60" T48 SRI LANKA (Price Chart 3) 78" 78" 78" 78" 72" 66" 60" Z48 SRI LANKA ROOM DARKENING (Price Chart 6) 72" 72" 72" 66" 66" 60" 60" Battery Wand: SIZE MINIMUMS Minimum 22" Minimum 12" * Fabric code for Natural Streetside back fabric option. Notes: Top-Down/Bottom-Up and Two-On-One Headrail shades are not available. Maximum ordered width for Sahara and Sri Lanka light-filtering shades is. Maximum ordered width for end (EB) mount shades is 48". Satellite Battery Pack: Minimum 22" Minimum 12" 18V DC Power Supply: Minimum 22" Minimum 12" VI-6 -. -
Size Standards SIZE STANDARDS Maximum Height Per Width TRADITIONAL STYLE SHADES POWERVIEW MOTORIZATION 6" FLAT FOLD (VI-29) Width To: 54" 60" 66" 72" 78" 88" 96" FL51 BROOKLYN TWEED (Price Chart 3) 96" 78" 72" 62" FZ51 BROOKLYN TWEED ROOM DARKENING (Price Chart 6) 78" 72" 66" 60" FS49 DRAKE (Price Chart 3) 120" 120" 96" 78" 72" 62" FZ49 DRAKE ROOM DARKENING (Price Chart 6) 78" 72" 66" 60" FM45 ETCHED (Price Chart 3) 120" 120" 96" 78" 72" 62" FZ45 ETCHED ROOM DARKENING (Price Chart 6) 78" 72" 66" 60" FL8 HEATHER (Price Chart 2) 120" 120" 96" 78" 72" 62" FZ10 HEATHER ROOM DARKENING (Price Chart 5) 78" 72" 66" 60" FP3 INDIA SILK (Price Chart 3) 120" 120" 96" 78" 72" 62" FZ42 INDIA SILK ROOM DARKENING (Price Chart 6) 78" 72" 66" 60" FL52 JEWELSTONE (Price Chart 3) 120" 120" 96" 78" 72" 62" FZ52 JEWELSTONE ROOM DARKENING (Price Chart 6) 78" 72" 66" 60" FJ5 LINEN WEAVE (Price Chart 2) 120" 120" 96" 78" 72" 62" FZ5 LINEN WEAVE ROOM DARKENING (Price Chart 5) 78" 72" 66" 60" FJ47 FJ47C* NEWPORT LINEN (Price Chart 3) 120" 120" 96" 78" 72" 62" FZ47 NEWPORT LINEN ROOM DARKENING (Price Chart 6) 78" 72" 66" 60" FT6 FT6C* PAMPA (Price Chart 3) 78" 78" 78" 78" 72" 66" 60" FZ37 PAMPA ROOM DARKENING (Price Chart 6) 72" 72" 72" 66" 66" 60" 60" FT8 FT8C* PRAIRIE (Price Chart 3) 78" 78" 78" 78" 72" 66" 60" FZ39 PRAIRIE ROOM DARKENING (Price Chart 6) 72" 72" 72" 66" 66" 60" 60" FT46 SAHARA (Price Chart 3) 78" 78" 78" 78" 72" 66" 60" FZ46 SAHARA ROOM DARKENING (Price Chart 6) 72" 72" 72" 66" 66" 60" 60" FB2 SATIN WEAVE (Price Chart 1) 120" 120" 96" 78" 72" 62" FZ1 SATIN WEAVE ROOM DARKENING (Price Chart 4) 78" 72" 66" 60" FT4 FT4C* SAVANNAH (Price Chart 3) 78" 78" 78" 78" 72" 66" 60" FZ35 SAVANNAH ROOM DARKENING (Price Chart 6) 72" 72" 72" 66" 66" 60" 60" FM3 SHANTUNG (Price Chart 2) 120" 120" 96" 78" 72" 62" FZ40 SHANTUNG ROOM DARKENING (Price Chart 5) 78" 72" 66" 60" FQ1 SHEER LINEN (Price Chart 2) 120" 120" 96" 78" 72" 62" FZ30 SHEER LINEN ROOM DARKENING (Price Chart 5) 78" 72" 66" 60" FT48 SRI LANKA (Price Chart 3) 78" 78" 78" 78" 72" 66" 60" FZ48 SRI LANKA ROOM DARKENING (Price Chart 6) 72" 72" 72" 66" 66" 60" 60" Battery Wand: SIZE MINIMUMS Minimum 22" Minimum 12" * Fabric code for Natural Streetside back fabric option. Notes: Top-Down/Bottom-Up and Two-On-One Headrail shades are not available. Maximum ordered width for Sahara and Sri Lanka light-filtering shades is. Maximum ordered width for end (EB) mount shades is 48". Satellite Battery Pack: Minimum 22" Minimum 12" 18V DC Power Supply: Minimum 22" Minimum 12" SIZE STANDARDS SPECIALTY SHAPES (VI-36) Arch, Imperfect Arch Extended Arch Quarter Circle Circle Oval Angle Trapezoid Hexagon, Octagon ALL FABRICS Minimum Width 12" 12" 12" 12" 12" 12" 12" 12" Maximum Width 42" 72" 72" 72" 60" Minimum Height 12" 12" 12" 12" 24" 12" 12" 12" Maximum Height 42" 42" 72" 72" 72" 60" Notes: All specialty shapes are non-operable and remain in the lowered position. Specialty shapes are available with 4" full fold or 6" flat fold styles. - -. VI-7
Size Standards SIZE STANDARDS TIERED STYLE SHADES 4" FULL FOLD LiteRise Top-Down/ Bottom-Up VI-30 UltraGlide Top-Down/ Bottom-Up VI-31 EasyRise Top-Down/ Bottom-Up VI-32 TRAVERSED STYLE SHADES 4" FULL FOLD LiteRise VI-30 UltraGlide VI-31 EasyRise VI-32 Side Stack VI-35 L51 BROOKLYN TWEED (Price Chart 3) (Price Chart 11) Split Stack VI-35 192" 3 Z51E BROOKLYN TWEED ROOM DARKENING (Price Chart 6) (Price Chart 14) 288" S49L DRAKE (Price Chart 3) (Price Chart 11) 192" 3 Z49E DRAKE ROOM DARKENING (Price Chart 6) (Price Chart 14) 288" M45 ETCHED (Price Chart 3) (Price Chart 11) 192" 3 Z45E ETCHED ROOM DARKENING (Price Chart 6) (Price Chart 14) 288" L9 HEATHER (Price Chart 2) (Price Chart 10) 192" 3 Z23E HEATHER ROOM DARKENING (Price Chart 5) (Price Chart 13) 288" P4 INDIA SILK (Price Chart 3) (Price Chart 11) 192" 3 Z43E INDIA SILK ROOM DARKENING (Price Chart 6) (Price Chart 14) 288" L52 JEWELSTONE (Price Chart 3) (Price Chart 11) 192" 3 Z52E JEWELSTONE ROOM DARKENING (Price Chart 6) (Price Chart 14) 288" J6 LINEN WEAVE (Price Chart 2) (Price Chart 10) 192" 3 Z18E LINEN WEAVE ROOM DARKENING (Price Chart 5) (Price Chart 13) 288" J47 J47C* NEWPORT LINEN (Price Chart 3) (Price Chart 11) 192" 3 Z47E NEWPORT LINEN ROOM DARKENING (Price Chart 6) (Price Chart 14) 288" T6 T6C* PAMPA (Price Chart 3) (Price Chart 11) 192" 3 MINIMUMS 18" 12" 18" 12" 18" 16" 22" 12" 22" 12" 22" 16" 30" 36" 60" 36" * Fabric code for Natural Streetside back fabric option. VI-8 -. -
Size Standards SIZE STANDARDS TIERED STYLE SHADES 4" FULL FOLD LiteRise Top-Down/ Bottom-Up VI-30 UltraGlide Top-Down/ Bottom-Up VI-31 EasyRise Top-Down/ Bottom-Up VI-32 TRAVERSED STYLE SHADES 4" FULL FOLD LiteRise VI-30 UltraGlide VI-31 EasyRise VI-32 Side Stack VI-35 Z37E PAMPA ROOM DARKENING (Price Chart 6) (Price Chart 14) Split Stack VI-35 288" T8 T8C* PRAIRIE (Price Chart 3) (Price Chart 11) 192" 3 Z39E PRAIRIE ROOM DARKENING (Price Chart 6) (Price Chart 14) 288" T46 SAHARA (Price Chart 3) (Price Chart 11) 192" 3 Z46E SAHARA ROOM DARKENING (Price Chart 6) (Price Chart 14) 288" B3 SATIN WEAVE (Price Chart 1) (Price Chart 9) 192" 3 Z14E SATIN WEAVE ROOM DARKENING (Price Chart 4) (Price Chart 12) 288" T4 T4C* SAVANNAH (Price Chart 3) (Price Chart 11) 192" 3 Z35E SAVANNAH ROOM DARKENING (Price Chart 6) (Price Chart 14) 288" M4 SHANTUNG (Price Chart 2) (Price Chart 10) 192" 3 Z41E SHANTUNG ROOM DARKENING (Price Chart 5) (Price Chart 13) 288" Q2 SHEER LINEN (Price Chart 2) (Price Chart 10) 94" 94" 94" 94" 192" 96" 3 96" Z27E SHEER LINEN ROOM DARKENING (Price Chart 5) (Price Chart 13) 94" 94" 94" 94" 96" 288" 96" T48 SRI LANKA (Price Chart 3) (Price Chart 11) 192" 3 Z48E SRI LANKA ROOM DARKENING (Price Chart 6) (Price Chart 14) 288" MINIMUMS 18" 12" 18" 12" 18" 16" 22" 12" 22" 12" 22" 16" 30" 36" 60" 36" * Fabric code for Natural Streetside back fabric option. Notes: Not available with 6" flat folds. Maximum ordered width for end (EB) mount shades is 48". End mount not available with Traversed with Vertiglide shades. Traversed with Vertiglide: Split stack panels will be of equal width. See pages VI-10 and VI-11 for Tiered PowerView Motorization size standards. See page VI-12 for Tiered Two-On-One Headrail size standards. - -. VI-9
Size Standards SIZE STANDARDS Maximum Height Per Width TIERED STYLE SHADES POWERVIEW MOTORIZATION 4" FULL FOLD Standard (VI-34) and Top-Down/Bottom-Up (VI-34) Width To: 36" 42" 48" 54" 60" 66" 72" 78" 94" L51 BROOKLYN TWEED (Price Chart 3) Standard Shades 138" 126" 78" 72" 66" 60" Top-Down/Bottom-Up 78" 72" 66" 60" Z51E BROOKLYN TWEED ROOM DARKENING (Price Chart 6) Standard Shades 72" 66" 66" 60" 54" 48" Top-Down/Bottom-Up 72" 66" 66" 60" 54" 48" S49L DRAKE (Price Chart 3) Standard Shades 138" 126" 78" 72" 66" 60" Top-Down/Bottom-Up 78" 72" 66" 60" Z49E DRAKE ROOM DARKENING (Price Chart 6) Standard Shades 72" 66" 66" 60" 54" 48" Top-Down/Bottom-Up 72" 66" 66" 60" 54" 48" M45 ETCHED (Price Chart 3) Standard Shades 138" 126" 78" 72" 66" 60" Top-Down/Bottom-Up 78" 72" 66" 60" Z45E ETCHED ROOM DARKENING (Price Chart 6) Standard Shades 72" 66" 66" 60" 54" 48" Top-Down/Bottom-Up 72" 66" 66" 60" 54" 48" L9 HEATHER (Price Chart 2) Standard Shades 138" 126" 78" 72" 66" 60" Top-Down/Bottom-Up 78" 72" 66" 60" Z23E HEATHER ROOM DARKENING (Price Chart 5) Standard Shades 72" 66" 66" 60" 54" 48" Top-Down/Bottom-Up 72" 66" 66" 60" 54" 48" P4 INDIA SILK (Price Chart 3) Standard Shades 138" 126" 78" 72" 66" 60" Top-Down/Bottom-Up 78" 72" 66" 60" Z43E INDIA SILK ROOM DARKENING (Price Chart 6) Standard Shades 72" 66" 66" 60" 54" 48" Top-Down/Bottom-Up 72" 66" 66" 60" 54" 48" L52 JEWELSTONE (Price Chart 3) Standard Shades 138" 126" 78" 72" 66" 60" Top-Down/Bottom-Up 78" 72" 66" 60" Z52E JEWELSTONE ROOM DARKENING (Price Chart 6) Standard Shades 72" 66" 66" 60" 54" 48" Top-Down/Bottom-Up 72" 66" 66" 60" 54" 48" J6 LINEN WEAVE (Price Chart 2) Standard Shades 138" 126" 78" 72" 66" 60" Top-Down/Bottom-Up 78" 72" 66" 60" Z18E LINEN WEAVE ROOM DARKENING (Price Chart 5) Standard Shades 72" 66" 66" 60" 54" 48" Top-Down/Bottom-Up 72" 66" 66" 60" 54" 48" J47 J47C* NEWPORT LINEN (Price Chart 3) Standard Shades 138" 126" 78" 72" 66" 60" Top-Down/Bottom-Up 78" 72" 66" 60" Z47E NEWPORT LINEN ROOM DARKENING (Price Chart 6) Standard Shades 72" 66" 66" 60" 54" 48" Top-Down/Bottom-Up 72" 66" 66" 60" 54" 48" T6 T6C* PAMPA (Price Chart 3) Standard Shades 96" 78" 72" 66" 60" 54" 54" Top-Down/Bottom-Up 96" 78" 72" 66" 60" 54" 54" SIZE MINIMUMS Standard 22" Top-Down/Bottom-Up 26" 12" * Fabric code for Natural Streetside back fabric option. VI-10 -. -
Size Standards SIZE STANDARDS Maximum Height Per Width TIERED STYLE SHADES POWERVIEW MOTORIZATION 4" FULL FOLD Standard (VI-34) and Top-Down/Bottom-Up (VI-34) Width To: 36" 42" 48" 54" 60" 66" 72" 78" 94" Z37E PAMPA ROOM DARKENING (Price Chart 6) Standard Shades 78" 66" 60" 60" 54" 48" 42" Top-Down/Bottom-Up 78" 66" 60" 60" 54" 48" 42" T8 T8C* PRAIRIE (Price Chart 3) Standard Shades 96" 78" 72" 66" 60" 54" 54" Top-Down/Bottom-Up 96" 78" 72" 66" 60" 54" 54" Z39E PRAIRIE ROOM DARKENING (Price Chart 6) Standard Shades 78" 66" 60" 60" 54" 48" 42" Top-Down/Bottom-Up 78" 66" 60" 60" 54" 48" 42" T46 SAHARA (Price Chart 3) Standard Shades 96" 78" 66" 60" 60" 54" Top-Down/Bottom-Up 96" 78" 66" 60" 60" 54" Z46E SAHARA ROOM DARKENING (Price Chart 6) Standard Shades 96" 72" 66" 60" 54" 54" 48" Top-Down/Bottom-Up 96" 72" 66" 60" 54" 54" 48" B3 SATIN WEAVE (Price Chart 1) Standard Shades 138" 126" 78" 72" 66" 60" Top-Down/Bottom-Up 78" 72" 66" 60" Z14E SATIN WEAVE ROOM DARKENING (Price Chart 4) Standard Shades 72" 66" 66" 60" 54" 48" Top-Down/Bottom-Up 72" 66" 66" 60" 54" 48" T4 T4C* SAVANNAH (Price Chart 3) Standard Shades 96" 78" 72" 66" 60" 54" 54" Top-Down/Bottom-Up 96" 78" 72" 66" 60" 54" 54" Z35E SAVANNAH ROOM DARKENING (Price Chart 6) Standard Shades 78" 66" 60" 60" 54" 48" 42" Top-Down/Bottom-Up 78" 66" 60" 60" 54" 48" 42" M4 SHANTUNG (Price Chart 2) Standard Shades 138" 126" 78" 72" 66" 60" Top-Down/Bottom-Up 78" 72" 66" 60" Z41E SHANTUNG ROOM DARKENING (Price Chart 5) Standard Shades 72" 66" 66" 60" 54" 48" Top-Down/Bottom-Up 72" 66" 66" 60" 54" 48" Q2 SHEER LINEN (Price Chart 2) Standard Shades 132" 114" 96" 78" 72" Top-Down/Bottom-Up 96" 78" 72" Z27E SHEER LINEN ROOM DARKENING (Price Chart 5) Standard Shades 96" 78" 72" 72" 60" Top-Down/Bottom-Up 96" 78" 72" 72" 60" T48 SRI LANKA (Price Chart 3) Standard Shades 96" 78" 66" 60" 60" 54" Top-Down/Bottom-Up 96" 78" 66" 60" 60" 54" Z48E SRI LANKA ROOM DARKENING (Price Chart 6) Standard Shades 96" 72" 66" 60" 54" 54" 48" Top-Down/Bottom-Up 96" 72" 66" 60" 54" 54" 48" SIZE MINIMUMS Standard 22" Top-Down/Bottom-Up 26" 12" * Fabric code for Natural Streetside back fabric option. Notes: Not available with 6" flat folds. Maximum ordered width for Sahara and Sri Lanka shades is. Tiered PowerView Top-Down/Bottom-Up shades operate from the top-down or bottom-up, but not both at the same time. Maximum ordered width for end (EB) mount shades is 48". See the following page for Tiered Two-On-One Headrail and Tiered Architella PowerView size standards. - -. VI-11
Size Standards SIZE STANDARDS TIERED STYLE SHADES TWO-ON-ONE HEADRAIL LiteRise (VI-30) EasyRise (VI-32) PowerView Motorization (VI-34) Maximum Overall Width 140" 140" 140" Maximum Panel Width and Height See chart on pages VI-9 and VI-10. See chart on pages VI-9 and VI-10. See chart on pages VI-11 and VI-12. Minimum Overall Width 36" 36" 44" Minimum Panel Width 18" 18" 22" Minimum Height 12" 16" 12" Notes: Space between fabric panels is approximately 1. For unequal panel orders, the smaller panel must be at least one-third of the measured width of the larger panel. Maximum panel width for Sahara and Sri Lanka light-filtering shades is. UltraGlide operating system is not available. Not available with Tiered Architella fabrics. SIZE STANDARDS LiteRise VI-33 P4A ARCHITELLA INDIA SILK (Price Chart 8) J6A ARCHITELLA LINEN WEAVE (Price Chart 7) T6A ARCHITELLA PAMPA (Price Chart 8) T8A ARCHITELLA PRAIRIE (Price Chart 8) T4A ARCHITELLA SAVANNAH (Price Chart 8) T46A ARCHITELLA SAHARA (Price Chart 8) MINIMUMS 18" 12" UltraGlide VI-33 94" 18" 12" TIERED STYLE SHADES ARCHITELLA EasyRise VI-33 94" 18" 16" LiteRise Top-Down/ Bottom-Up UltraGlide Top-Down/ Bottom-Up EasyRise Top-Down/ Bottom-Up Notes: Not available with 6" flat folds, room-darkening fabrics, Natural Streetside back fabric option, Top-Down/Bottom-Up or Traversed Style shades. Maximum ordered width for end (EB) mount shades is 48". SIZE STANDARDS Maximum Height Per Width TIERED STYLE SHADES ARCHITELLA POWERVIEW MOTORIZATION (VI-34) Width To: 36" 42" 48" 54" 60" 66" 72" 78" 94"* P4A ARCHITELLA INDIA SILK (Price Chart 8) J6A ARCHITELLA LINEN WEAVE (Price Chart 7) T6A ARCHITELLA PAMPA (Price Chart 8) T8A ARCHITELLA PRAIRIE (Price Chart 8) T4A ARCHITELLA SAVANNAH (Price Chart 8) Standard 78" 72" 66" 66" 60" 54" T46A ARCHITELLA SAHARA* (Price Chart 8) Standard 78" 72" 66" 66" 60" 54" 22" SIZE MINIMUMS 12" *Maximum width for Sahara Tiered Architella shades is. Notes: Not available with 6" flat folds, room-darkening fabrics or Natural Streetside back fabric option. Not available with Top-Down/Bottom-Up or Two-On-One Headrail shades. Maximum ordered width for end (EB) mount shades is 48". VI-12 -. -
Summary of Operating Systems and Options OPERATING SYSTEMS AND OPTIONS AT-A-GLANCE Style Fabric Styles UltraGlide EasyRise LiteRise EasyRise Two-On-One Headrail UltraGlide Two-On-One Headrail UltraGlide & EasyRise Top-Down/ Bottom-Up LiteRise Two-On-One Headrail LiteRise Top-Down/ Bottom-Up PowerView Motorization PowerView Two-On-One Headrail PowerView Top-Down/ Bottom-Up TRADITIONAL 4" Full Fold & 6" Flat Fold Rolling Style All V V V V* V V TRADITIONAL ROOM DARKENING 4" Full Fold & 6" Flat Fold Rolling Style 99% Room Darkening All V V V V* V V TIERED 4" Full Fold Stacking Style All V V V V V V V V TIERED ARCHITELLA 4" Full Fold Stacking Style TIERED ROOM DARKENING 4" Full Fold Stacking Style 99% Room Darkening TRAVERSED with VERTIGLIDE 4" Full Fold Gliding Style India Silk, Linen Weave, Sahara and Grasslands Collection All All V V V V V V V V V V *6" Flat Fold is not available. Notes: Natural streetside back fabric option: Available on Newport Linen and Grasslands Collection fabrics only. Not available with Room-Darkening option. Top-Down/Bottom-Up option: Available with 4" full fold only. Architella option: Available in India Silk, Linen Weave, Sahara and Grasslands Collection fabrics only. Not available with Top-Down/Bottom-Up or Two-On-One Headrail options. Notes Pattern alignment between the fabric-covered headrail and shade cannot be guaranteed. Horizontal patterns on fabric-covered headrails may not run perfectly horizontal; slight bias may occur. Horizontal shades are bottom registered to achieve the exact ordered height. As a result, the bottom fabric fold (attached to the bottom rail) may be shorter or longer than the other folds. This is a normal and inherent characteristic of the product and is not considered a defect. Some maximum width single panel horizontal shades may have a seam in the fabric covering the headrail due to the raw material width. With all Vignette shades, you may see some creasing in the fabric folds. A light steaming generally eliminates these creases; do not steam the fabric-covered headrail, mid-rail or bottom rail. With lighter weight fabrics on Tiered and Traversed Styles, you may see slight bumps at the top of the shade below the headrail (Tiered Style) or within the shade (Tiered and Traversed Styles). This is due to the inner cord attachment necessary to operate the shade. Variations in color or pattern imperfections are unique characteristics and should be considered as normal, acceptable quality. For maximum room darkening, order outside-mounted shades with a 4" overlap on each side. With Traditional Style shades, sometimes when a shade is fully raised one fold may not be completely concealed inside the headrail, which causes an uncaptured fold. This product characteristic is a result of a shade s height and can vary from fabric to fabric. For outside-mounted Traversed Style shades, overall shade height will equal ordered shade height. Shade height is measured from the top of headrail to the bottom of shade. Be sure to allow for adequate floor clearance. For inside-mounted Traversed Style shades, a 1 /2" deduction for floor clearance will be taken from the ordered height. The directional pattern on Traversed Style shades runs opposite the directional pattern on horizontal Vignette shades; the pattern runs vertically on the headrail and horizontally on the fabric panel(s) and return(s). In addition to our wireless control system, PowerView Motorization, Hunter Douglas provides hard-wired motorized shade solutions for integration with automation systems. Please contact your Hunter Douglas fabricator to learn more about our hard-wired options. - -. VI-13
Nov-17 Vignette Modern Roman Shades Prices in Price Chart 1 - Standard: Fabrics B3, FB2 Inch 24 30 36 42 48 54 60 66 72 78 84 90 96 102 106 36 23212 25551 28182 30579 33327 35842 38648 41572 47828 52271 54844 57709 60516 63439 66596 42 24031 26837 29585 32333 35315 38122 41045 44027 50810 55136 58177 60866 64199 67590 71157 48 25259 28007 31339 33912 37011 40168 43384 46775 53675 57826 61334 64550 67590 70982 74314 54 26136 29352 32509 35725 38940 42507 46015 48237 54786 60691 64667 68234 71859 75893 80044 60 27013 30462 33971 37362 40695 44495 48471 52096 57651 64024 65953 71566 76010 80629 85540 66 28007 31866 35608 39057 42799 46892 51102 55253 60457 67357 71449 75659 80103 84839 89575 72 29293 33211 36953 40461 44963 49348 53558 58060 63264 70806 75074 79577 84196 88639 93902 78 29995 34029 38005 42215 46775 51336 55838 60574 65895 72034 78290 82675 87938 92440 97644 84 30872 35432 39233 43969 48880 53382 58469 61977 69052 75074 81974 86359 91095 96182 101503 90 32100 36368 40812 45781 50868 56130 59522 64667 72034 78232 85833 91504 94954 98988 102613 96 32860 37596 42449 47652 51687 56774 62036 67473 75074 80629 88990 95773 98930 102730 106122 102 33971 38824 44144 49582 53909 59405 64082 70455 78232 87002 92498 100275 103081 106005 109513 108 35082 40168 45664 50342 56247 62036 66772 73671 81740 90686 100684 111969 124306 138046 153365 114 36368 41689 46249 52447 58586 64784 69637 76712 85424 94896 105595 117348 130445 145062 161200 120 37537 43033 48003 54610 60983 67649 72560 80220 89166 98988 110039 122259 135824 150851 167690 126 38473 43443 49816 56832 63731 70572 75542 83903 93141 103315 114775 127346 141437 156990 174355 132 38590 44963 51687 59171 66479 73671 78641 87704 97234 107876 119686 132784 147284 163305 181196 138 39759 46541 53558 61685 69286 76829 81857 91563 101561 112495 124832 138221 153306 169970 188446 144 40870 48179 55604 64316 72151 80161 85365 95714 106005 117465 130036 144068 159621 176869 195872 Price Chart 2 - Standard: Fabrics J6, FJ5, L9, FL8, M4, FM3, Q2, FQ1 Inch 24 30 36 42 48 54 60 66 72 78 84 90 96 102 106 36 25785 28299 31339 33971 36894 39818 42916 46132 53090 58060 60925 64082 67181 70572 73905 42 26662 29819 32743 35900 39057 42332 45664 48822 56481 61334 64608 67590 71215 75074 78992 48 28007 31164 34672 37713 41104 44554 48179 51979 59580 64316 68117 71625 75133 78758 82559 54 29059 32509 36076 39701 43267 47243 51044 53558 60866 67415 71742 75718 79869 84313 88873 60 29995 33854 37771 41455 45197 49465 53733 57826 64024 71040 73320 79518 84430 89692 94896 66 31164 35432 39467 43384 47535 52096 56715 61393 67064 74841 79401 84020 88990 94252 99515 72 32450 36719 41045 44904 49991 54786 59463 64492 70163 78641 83436 88347 93551 98521 104309 78 33327 37830 42215 46834 51979 56949 62036 67298 73203 80044 87002 91972 97644 102613 108402 84 34321 39233 43618 48763 54259 59346 64959 68818 76653 83436 90920 95948 101152 106706 112670 90 35666 40344 45314 50810 56540 62270 66129 71800 80044 86944 95305 101678 105478 109981 114015 96 36485 41747 47068 52856 57358 63030 68877 74958 83436 89692 98813 106355 109981 114132 117815 102 37713 43033 48939 55020 59814 65953 71157 78173 86944 96650 102730 111267 114483 117699 121674 108 38940 44612 50693 55955 62445 68877 74139 81798 90744 100742 111910 124364 138046 153306 170379 114 40344 46249 51394 58294 65018 71917 77355 85190 94779 105478 117231 130386 144828 161083 179150 120 41689 47828 53265 60633 67766 75133 80454 89107 98988 110039 122259 135766 150851 167690 186283 126 42683 48237 55253 63088 70806 78290 83903 93141 103491 114775 127521 141554 157048 174414 193650 132 42858 49991 57358 65719 73788 81857 87353 97410 108051 119803 132901 147459 163538 181430 201309 138 44144 51687 59463 68584 76945 85365 90861 101736 112729 124949 138689 153657 170321 188797 209320 144 45372 53499 61685 71391 80161 89049 94720 106297 117757 130503 144419 160089 177279 196515 217622
Price Chart 3: - Standard: J47, FJ47, M45, FM45, P4, FP4, T4, FT4, T4C, FT4C, T6, FT6, T6C, FT6C, T8, FT8, T8C, FT8C, T46, FT46, T48, FT48, L51, FL51, L52, FL52, S49L, FS49 Inch 24 30 36 42 48 54 60 66 72 78 84 90 96 102 106 36 28241 31339 34321 37537 40578 43910 47243 50693 58411 64024 67181 70514 73964 77647 81506 42 29468 32743 36017 39584 42916 46366 50225 53733 62036 67298 71099 74256 78173 82442 86827 48 30813 34263 37888 41338 45197 48939 53032 57241 65486 70806 75016 78933 82559 86651 90920 54 31690 35725 39759 43560 47477 51687 56247 58937 67064 74256 78933 83026 87821 92615 97819 60 33035 37537 41572 45664 49582 54493 58937 63848 70280 78290 80571 87470 92791 98696 104309 66 34204 38882 43326 47769 52388 57300 62387 67298 73788 82383 87236 92323 97877 103724 109279 72 35608 40578 45080 49757 54844 60282 65193 71040 77062 86476 91621 97059 102789 108460 114775 78 36426 41572 46366 51570 57007 62562 68058 74022 80454 88172 95773 100976 107993 112904 119160 84 37830 43092 48003 53733 59463 65135 71508 75718 84137 91797 100158 105595 112787 117523 123896 90 39057 44437 49991 55955 62211 68526 72794 78816 88055 95656 104309 111033 118459 120914 125533 96 40227 46074 51979 58118 62854 69344 75718 82325 91621 98696 108694 116938 124422 125533 129626 102 41513 47535 53909 60516 65544 72209 79167 86184 95656 101912 113255 122902 129568 130737 133778 108 42916 49231 55838 61451 68409 75484 82559 89926 99807 110916 123078 136818 151961 168801 187335 114 44495 50868 56540 64082 71157 78641 86417 93960 104251 115944 128983 143367 159446 177220 197100 120 46132 52798 58762 66772 74139 82091 90276 98170 108811 120973 134538 149389 165936 184470 204993 126 47009 53090 60750 69520 77823 86242 92206 102555 113723 126352 140209 155704 172777 191896 213120 132 47243 54961 63030 72326 81155 89926 96123 107057 118809 131790 146173 162252 179910 199614 221423 138 48588 56832 65427 75425 84605 93902 100099 111910 124072 137461 152488 169034 187277 207683 230252 144 49991 58762 67766 78466 88230 97936 104192 116938 129568 143483 158861 176168 195053 216161 239373 Price Chart 4 - Evescape : Z14, Z14E, FZ1 Satin Weave Nov-17 Vignette Modern Roman Shades Prices in Inch 24 30 36 42 48 54 60 66 72 78 84 90 96 102 106 36 26837 29702 32860 35783 38824 41922 45080 48588 56189 61100 64199 67415 70748 74197 77881 42 28007 31398 34380 37888 40987 44495 48120 51511 59580 64550 67941 71215 74958 78992 83202 48 29352 32684 36426 39642 43384 47068 50868 54786 63030 67824 71859 75718 79460 82968 87061 54 30462 34204 38063 41864 45723 49816 54084 56657 64608 71099 75893 79927 84371 88756 93726 60 31573 35783 39993 43969 47945 52388 56715 61334 67707 75308 77647 84079 89282 94428 99982 66 32684 37069 41689 45957 50459 55253 60223 65018 70923 79343 84079 88873 94135 99398 104718 72 34088 38824 43384 47711 52856 58060 63147 68409 74431 83377 88230 93609 98871 103783 109922 78 34965 40051 44437 49582 54903 60399 65778 71508 77823 84897 92264 97585 102789 108110 114249 84 36251 41513 46132 51804 57475 63088 69111 73203 81565 88347 96591 101035 106589 112436 118692 90 37713 42449 47828 53616 59580 65661 69695 75718 84313 92031 101152 107057 111033 115769 120096 96 38414 43852 49582 55663 60457 66479 72560 78875 87879 94428 104134 112027 115769 120213 124072 102 39818 45431 51628 58001 62854 69578 75016 82383 91621 101912 108227 117231 120564 124013 128048 108 40987 46951 53499 58820 65719 72560 78115 86067 95656
Nov-17 Vignette Modern Roman Shades Heather, Linen Wv, Shantung, Sheer Linen Price Chart 5 - Rm Drkg : Z23, Z23E, FZ10, Z18, Z18E, FZ5, Z27, Z27E, FZ30, Z41, Z41E, FZ40 Prices in Inch 24 30 36 42 48 54 60 66 72 78 84 90 96 102 106 36 29936 32918 36543 39759 43209 46541 50167 54026 62387 67883 71332 74899 78524 82442 86476 42 31164 34789 38180 42098 45664 49465 53441 57241 66129 71742 75542 79167 83377 87821 92440 48 32567 36368 40461 44027 48237 52330 56540 60866 70046 75367 79869 84079 88230 92206 96708 54 33854 38005 42273 46425 50693 55312 60106 62913 71742 79050 84313 88756 93843 98638 104075 60 34965 39759 44378 48763 53149 58235 62971 68058 75191 83611 86242 93434 99164 104894 111033 66 36368 41279 46249 50985 56072 61393 66889 72268 78816 88113 93434 98754 104601 110331 116354 72 37888 43209 48179 52915 58762 64492 70163 75952 82675 92557 98053 103958 109922 115243 122084 78 38882 44437 49406 55078 60983 67064 73028 79460 86417 94311 102497 108343 114249 120154 126878 84 40227 46074 51277 57475 63848 70105 76829 81389 90510 98170 107291 112319 118459 124949 131848 90 41864 47126 53032 59580 66129 72911 77413 84079 93668 102204 112436 118926 123370 128632 133368 96 42683 48705 55078 61860 67123 73847 80512 87645 97644 104894 115652 124422 128632 133544 137870 102 44203 50459 57358 64433 69812 77238 83377 91563 101795 113138 120271 130269 133953 137812 142256 108 45606 52213 59463 65369 72970 80512 86710 95656 106239 Price Chart 6 - Evescape : Z35, FZ35, Z35E, Z37, FZ37, Z37E, Z39, FZ39, Z39E, Z43, FZ43, Z43E, Z47, FZ47, Z47E, Z45, FZ45, Z45E, Z46, FZ46, Z46E, Z48, FZ48, Z48E, Z49L, FZ49, Z49E, Z51, FZ51, Z51E, Z52, FZ52, Z52E Inch 24 30 36 42 48 54 60 66 72 78 84 90 96 102 106 36 32801 36426 40168 43677 47419 51277 55078 59171 68526 74665 78466 82325 86476 90803 95305 42 34321 38180 42273 46249 50225 54435 58703 62913 72736 78758 83026 86944 91621 96474 101736 48 35842 39993 44437 48471 52973 57534 62270 67123 77004 82792 87996 92440 96767 101503 106414 54 37011 41864 46483 51044 55780 60750 66246 69403 78758 87119 92498 97702 103023 108402 114483 60 38590 43735 48763 53675 58411 64199 69286 75016 82675 91914 94779 102789 109104 115535 122084 66 39993 45489 50751 56130 61685 67298 73437 79401 86710 96883 102613 108460 115126 121265 127931 72 41630 47477 52973 58352 64492 70865 77062 83845 91037 101912 107759 114307 120973 126937 134245 78 42566 48822 54493 60516 67064 73905 80337 87353 95071 103958 112729 118868 126352 132082 139449 84 44378 50576 56481 63147 70163 77004 84371 89399 99456 108168 118166 124364 131965 137461 145004 90 45723 51979 58352 65486 72794 80103 85014 92206 102906 112553 123721 130036 138630 141554 146875 96 47009 53850 60574 68000 73554 81038 88639 96299 107116 115535 127287 136876 145647 146875 151728 102 48588 55663 62971 70923 76712 84546 92498 100742 111910 119160 132608 143776 151669 153072 156581 108 50225 57592 65427 71859 79986 88289 96708 105245 116763
Nov-17 Price Chart 7 - Tiered Architella - J6A Linen Weave Prices in Vignette Modern Roman Shades Inch 24 30 36 42 48 54 60 66 72 78 84 90 94 36 28241 31339 34321 37537 40578 43910 47243 50693 58411 64024 67181 70514 73964 42 29468 32743 36017 39584 42916 46366 50225 53733 62036 67298 71099 74256 78173 48 30813 34263 37888 41338 45197 48939 53032 57241 65486 70806 75016 78933 82559 54 31690 35725 39759 43560 47477 51687 56247 58937 67064 74256 78933 83026 87821 60 33035 37537 41572 45664 49582 54493 58937 63848 70280 78290 80571 87470 92791 66 34204 38882 43326 47769 52388 57300 62387 67298 73788 82383 87236 92323 97877 72 35608 40578 45080 49757 54844 60282 65193 71040 77062 86476 91621 97059 102789 78 36426 41572 46366 51570 57007 62562 68058 74022 80454 88172 95773 100976 107993 84 37830 43092 48003 53733 59463 65135 71508 75718 84137 91797 100158 105595 112787 90 39057 44437 49991 55955 62211 68526 72794 78816 88055 95656 104309 111033 118459 96 40227 46074 51979 58118 62854 69344 75718 82325 91621 98696 108694 116938 124422 102 41513 47535 53909 60516 65544 72209 79167 86184 95656 101912 113255 122902 130737 Price Chart 8 - Tiered Architella : P4A, T4A, T6A, T8A, T46A Nov-17 Vignette Modern Roman Shades Inch 24 30 36 42 48 54 60 66 72 78 84 90 94 36 31164 34555 37830 41104 44670 48296 51979 55780 64375 70397 73905 77530 81506 42 32450 36076 39701 43560 47302 50927 55253 59171 68234 74022 78115 81857 86184 48 33854 37771 41689 45606 49757 53909 58352 62854 71976 77823 82383 86768 90920 54 34848 39408 43677 47945 52271 56832 61977 64901 73788 81798 86768 91504 96650 60 36368 41104 45723 50225 54610 59872 64784 70222 77413 86184 88756 96182 102087 66 37713 42741 47711 52447 57709 62913 68701 74022 81155 90627 96006 101619 107817 72 39174 44670 49640 54727 60282 66421 71859 78173 84663 95305 100859 106823 113138 78 40110 45723 50985 56715 62621 68877 74958 81565 88522 96942 105303 111092 118751 84 41630 47419 52856 59171 65427 71800 78524 83436 92498 100859 110156 116120 124013 90 43092 48880 54961 61685 68467 75367 79986 86710 96767 105186 114775 122259 130269 96 44320 50576 57124 64082 69169 76244 83436 90627 100742 108577 119686 128691 136876 102 45664 52271 59346 66655 72093 79577 86944 94720 105186 112202 124773 135239 143776
Nov-17 Price Chart 9 - Traversed w Vertiglide: B3 Satin Weave Prices in Vignette Modern Roman Shades Inch 36 48 54 60 66 72 78 84 90 96 108 120 132 144 156 174 192 48 41513 48880 52330 56306 61276 64316 68351 72443 77530 82091 88230 104952 113196 120973 128808 140443 152312 60 46600 55429 59522 64024 69871 72034 78466 80863 88873 94252 100918 119043 127638 135999 144594 157107 170028 72 52856 63322 68234 73905 80512 83669 91095 96416 103081 109454 125124 141846 155820 166403 177279 193182 210021 84 58177 70280 76185 82266 87353 92908 98521 106999 114132 120797 130620 147986 162427 173361 184704 201602 218558 96 61860 72560 78407 84897 92440 98287 104484 113313 120797 128281 142139 159446 175115 187218 199614 218324 236976 108 73145 87528 95773 105420 115477 123078 131205 139215 147635 156288 169736 190317 206046 218558 230953 249839 268783 Price Chart 10 - Traversed w Vertiglide: J6, L9, M4, Q2 Heather, Linen Weave, Shantung, Sheer Linen Inch 36 48 54 60 66 72 78 84 90 96 108 120 132 144 156 174 192 48 46074 54318 58177 62562 68000 71508 75893 80395 86125 91212 97994 116646 125767 134362 143074 156054 169151 60 51862 61568 66129 71099 77647 80044 87236 89809 98754 104718 112202 132257 141788 151084 160615 174589 188856 72 58762 70280 75835 82091 89516 92849 101152 107116 114541 121616 139040 157633 173069 184880 196983 214640 233292 84 64608 78115 84663 91446 96942 103198 109454 118868 126761 134187 145121 164357 180436 192656 205168 224054 242823 96 68701 80512 87119 94311 102672 109162 116120 125943 134187 142431 157984 177103 194586 208033 221774 242589 263287 108 81331 97117 106355 117055 128281 136759 145822 154651 164006 173537 188505 211366 228848 242823 256621 277612 298661 Price Chart 11 - Traversed /w Vertiglide: J47, J47C, L51, L52, M45, P4, S49L, T4, T4C, T6, T6C, T8, T8C, T46, T48 Inch 36 48 54 60 66 72 78 84 90 96 108 120 132 144 156 174 192 48 48705 57534 61685 66421 72151 76010 80571 85540 91095 97059 104660 124013 133661 142548 151611 165059 178623 60 54552 64784 69695 74899 81623 84313 91738 94545 103783 110331 118576 139917 149915 159679 169502 184470 199380 72 61568 73905 79986 86417 94252 97936 106531 112846 120680 128048 146992 166579 183009 195346 208092 226861 246565 84 66421 82442 88990 96182 102204 108753 115535 125533 133427 141554 153365 173887 190493 203414 216687 236625 256563 96 71800 84605 91797 99164 108285 115184 122493 132725 141554 149857 167163 187628 205519 220078 234578 256212 278313 108 83611 100392 109981 120622 132199 141203 150441 159796 169210 178916 194352 218207 232766 247032 261299 282582 304157 Brooklyn Tweed, Drake, Etched, Jewelstone, India Silk, Newport Linen, Pampa, Prairie, Sahara, Savannah, Sri Lanka
Price Chart 12 - Room Darkening - Traversed /w Vertiglide: Z14E Satin Weave Room Darkening Nov-17 Vignette Modern Roman Shades Prices in Inch 36 48 54 60 66 72 78 84 90 96 108 120 132 144 48 49757 58645 62796 67590 73496 77179 81974 86827 93025 98521 105829 126001 135824 145121 60 55955 66479 71449 76770 83845 86417 94252 96942 106648 113079 121148 142840 153072 163129 72 63498 75952 81915 88639 96650 100333 109279 115769 123721 131322 150149 170204 186926 199614 84 69812 84371 91504 98696 104718 111559 118225 128398 136876 144945 156697 177454 194819 208092 96 74197 86944 94077 101853 110916 117932 125358 136058 144945 153891 170613 191253 210138 224639 108 87821 104952 114834 126469 138514 147693 157458 167047 177103 187452 203531 228264 247149 262234 Price Chart 13 - Room Darkening - Traversed /w Vertiglide: Z23E, Z18E, Z41E, Z27E Heather, Linen Wv, Shantung, Sheer Linen Inch 36 48 54 60 66 72 78 84 90 96 108 120 132 144 48 55312 65135 69812 75016 81623 85774 91037 96474 103315 109454 117582 139975 150909 161258 60 62211 73905 79401 85365 93141 96065 104660 107759 118517 125709 134596 158744 170145 181255 72 70514 84371 90978 98521 107349 111501 121382 128574 137403 145939 166813 189089 207683 221891 84 77530 93785 101678 109688 116354 123896 131322 142665 152137 161024 174180 197217 216511 231129 96 82442 96650 104543 113138 123195 131030 139274 151143 161024 170906 189499 212536 233468 249605 108 97585 116588 127638 140502 153891 164123 174940 185581 196749 208326 226159 253639 274630 291352 Price Chart 14 - Room Darkening /w Vertiglide: Z51E, Z49E, Z45E, Z52E, Z43E, Z47E, Z37E, Z39E, Z35E, Z46E, Z48E Brooklyn Tweed, Drake, Etched, Jewelstone, India Silk, Newport Linen, Pampa, Prairie, Savannah, Sahara, Sri Lanka Inch 36 48 54 60 66 72 78 84 90 96 108 120 132 144 48 58469 68994 74022 79694 86593 91212 96708 102613 109279 116529 125650 148804 160381 171081 60 65486 77764 83669 89867 97936 101152 110039 113489 124481 132374 142256 167924 179910 191545 72 73905 88698 96006 103724 113079 117523 127872 135415 144828 153716 176402 199906 219610 234462 84 79694 98930 106765 115360 122610 130503 138630 150617 160147 169853 184061 208618 228556 244109 96 86184 101561 110156 119043 129919 138280 146933 159212 169853 179793 200666 225165 246623 264105 108 100275 120447 131965 144711 158627 169444 180553 191662 203064 214699 233234 261825 279307 296439 Design Options Surcharges Top-Down/Bottom-Up 11556 UltraGlide 3157 LiteRise 3157 Two-On-One Headrail Price as two individual EasyRise standard shades Specialty Shapes 10230 LiteRise Extension Pole - 51 inches 5810 Return for Traversed - Side Stack 5557 Return for Traversed - Split Stack 10988 Accents By The Yard (per linear yard) 4862 SILHOUETTE POWERVIEW SURCHARGES PowerView Surcharge 17365
Traditional Style LiteRise Product Specifications APPLICATIONS Traditional Style: Shades roll up into the headrail. 4" full fold and 6" flat fold. LiteRise Standard: Fits rectangular window openings. Cordless operation. Shades open from bottom to top. LiteRise Two-On-One Headrail: Fits rectangular window openings. Shades share one headrail and operate independently. Panel widths may be equal or unequal; customer may specify split location. With unequal panels, the smaller panel must be at least one-third the measured width of the larger panel. Unless otherwise specified, the two panels will be split in the center. Seam in fabric covering the headrail will align with fabric panel split location. Size Standards See Size Standards on page VI-3 Mounting Requirements Minimum casement depth 1" Minimum casement depth, fully recessed 4" Minimum mounting surface height 1" Recommended width overlap, per side 4" Recommended top overlap 3 1 /4" Minimum mounting surface depth 1 1 /2" 3 3 /16" 4" 2 1 /4" 1 1 /2" Headrail Dimensions Finished Dimensions (All allowances are taken from ordered dimensions and may vary ± 1.) Headrail unit - 3 /16" Shade height - 1 Fabric width -1 3 /16" Headrail unit ordered width Shade height - 1 Fabric width - 15 /16" Headrail unit - 11 /16" Shade height - 1 Fabric width -1 11 /16" Two-On-One Headrail Approximate gap between fabric panels 3 /8 Note: Maximum shade height deduction is 1 /4". Edge Gaps (from window opening edge to fabric) Both sides 5 Both sides 7 Abutted Shades Gap between fabric panels 1 1 /16" Hardware Included Standard installation brackets Color-coordinated handle and end caps Optional Features No Charge Specify on Order 1 /2" or 1 /4" spacer blocks Magnetic hold-down brackets Extension brackets (end mount only) Surcharge Specify on Order LiteRise system Accents by the Yard cut yardage HOW TO PRICE Important Note! All base prices are predicated on Ordered Dimensions, not Finished Dimensions. Add LiteRise surcharge to the base prices shown on price charts 1 to 6 (see pages VI-14 to VI-19). Price Two-On-One Headrail shades as two individual Vignette shades. Add LiteRise surcharge to each panel. EXCLUSIONS Fold alignment Two-On-One Headrail as end (EB) mount Top-Down/Bottom-Up ORDERING CHECKLIST 4 Specify inside (IB), outside (OB) or end (EB) mount. 4 Specify any optional mounting hardware. 4 Two-On-One Headrail only: specify unequal panel widths, if desired. Overall shade width cannot exceed 140". 4 Specify optional Accents by the Yard cut yardage, if desired. Notes Pattern alignment between headrail and shade cannot be guaranteed with patterned fabrics. Two-On-One Headrail shades will be fabricated with a seam in the fabric covering the headrail. Some maximum width single-panel shades may have a seam in the fabric covering the headrail due to the raw material fabric width. Occasionally, when a shade is fully raised one fold may not be completely concealed inside the headrail, which causes an uncaptured fold. This product characteristic is a result of a shade s height and can vary from fabric to fabric. See page VI-13 for additional notes. Effective 5/16/17 Go to the online Reference Guide at my.hunterdouglas.com for the most up-to-date information. VI-25
Traditional Style UltraGlide Product Specifications APPLICATIONS Traditional Style: Shades roll up into the headrail. 4" full fold and 6" flat fold. UltraGlide Standard: Fits rectangular window openings. Shades open from bottom to top using retractable cord; cord length remains constant. UltraGlide Two-On-One Headrail: Fits rectangular window openings. Shades share one headrail and operate independently using retractable cords. Panel widths may be equal or unequal; customer may specify split location. With unequal panels, the smaller panel must be at least one-third the measured width of the larger panel. Unless otherwise specified, the two panels will be split in the center. Seam in fabric covering the headrail will align with fabric panel split location. Fabric fold alignment should not exceed 1 /4" from panel to panel. Size Standards See Size Standards on page VI-4 and VI-5 Mounting Requirements Minimum casement depth 1" Minimum casement depth, fully recessed 4" Minimum mounting surface height 1" Recommended width overlap, per side 4" Recommended top overlap 3 1 /4" Minimum mounting surface depth 1 1 /2" 3 3 /16" 7 4" 2 1 /4" Headrail Dimensions Finished Dimensions (All allowances are taken from ordered dimensions and may vary ± 1.) Headrail unit - 3 /16" Shade height - 1 Fabric width -1 1 Headrail unit ordered width Shade height - 1 Fabric width - 15 /16" Headrail unit - 11 /16" Shade height - 1 Fabric width -1 5 Two-On-One Headrail Approximate gap between fabric panels 3 /8 Note: Maximum shade height deduction is 1 /4". Edge Gaps (from window opening edge to fabric) Control side 5 Free side 1 /2" Abutted Shades Free side against free side 15 /16" Free side against control side 1 1 /16" Control side against control side 1 3 /16" Hardware Included Standard installation brackets Color-coordinated cord, tassel and end caps Optional Features No Charge Specify on Order 1 /2" or 1 /4" spacer blocks Magnetic hold-down brackets Extension brackets (end mount only) Surcharge Specify on Order UltraGlide system Accents by the Yard cut yardage HOW TO PRICE Important Note! All base prices are predicated on Ordered Dimensions, not Finished Dimensions. Add UltraGlide surcharge to the base prices shown on price charts 1 to 6 (see pages VI-14 to VI-19). Price Two-On-One Headrail shades as two individual Vignette shades. Add UltraGlide surcharge to each panel. EXCLUSIONS Two-On-One Headrail as end (EB) mount ORDERING CHECKLIST 4 Specify inside (IB), outside (OB) or end (EB) mount. 4 Specify cord placement (left or right). 4 Specify side-by-side fold alignment, if desired (see page VI-40). 4 Specify any optional mounting hardware. 4 Two-On-One Headrail only: specify unequal panel widths, if desired. Overall shade width cannot exceed 140". 4 Specify optional Accents by the Yard cut yardage, if desired. Notes Pattern alignment between headrail and shade cannot be guaranteed with patterned fabrics. Two-On-One Headrail shades will be fabricated with a seam in the fabric covering the headrail. Some maximum width single-panel shades may have a seam in the fabric covering the headrail due to the raw material fabric width. Cord length will be equal to 60% of shade height, and may be shortened for enhanced child safety. Occasionally, when a shade is fully raised one fold may not be completely concealed inside the headrail, which causes an uncaptured fold. This product characteristic is a result of a shade s height and can vary from fabric to fabric. See page VI-13 for additional notes. VI-26 Go to the online Reference Guide at my.hunterdouglas.com for the most up-to-date information. Effective 5/16/17
Traditional Style EasyRise Product Specifications APPLICATIONS Traditional Style: Shades roll up into the headrail. 4" full fold and 6" flat fold. EasyRise Standard: Fits rectangular window openings. Shades open from bottom to top using EasyRise cord loop. EasyRise Two-On-One Headrail: Fits rectangular window openings. Shades share one headrail and operate independently using EasyRise cord loops. Panel widths may be equal or unequal; customer may specify split location. With unequal panels, the smaller panel must be at least one-third the measured width of the larger panel. Unless otherwise specified, the two panels will be split in the center. Seam in fabric covering the headrail will align with fabric panel split location. Fabric fold alignment should not exceed 1 /4" from panel to panel. Size Standards See Size Standards on pages VI-4 and VI-5 Mounting Requirements Minimum casement depth 1" Minimum casement depth, fully recessed 4" Minimum mounting surface height 1" Recommended width overlap, per side 4" Recommended top overlap 3 1 /4" Minimum mounting surface depth 1 1 /2" Edge Gaps (from window opening edge to fabric) Control side 5 Free side 1 /2" Abutted Shades Free side against free side 1" Free side against control side 1 1 Control side against control side 1 1 /4" IMPORTANT In accordance with the revised American National Standard for Safety of Corded Window Covering Products, EasyRise shades require proper mounting of the cord tensioner for the product to function properly. The cord tensioner should not be modified in any way. Finished Dimensions (All allowances are taken from ordered dimensions and may vary ± 1.) Headrail unit - 3 /16" Shade height - 1 Fabric width -1 1 Headrail unit ordered width Shade height - 1 Fabric width - 15 /16" Headrail unit - 11 /16" Shade height - 1 Fabric width -1 5 Two-On-One Headrail Approximate gap between fabric panels 3 Note: Maximum shade height deduction is 1 /4". Hardware Included Standard installation brackets Color-coordinated cord loop, tensioner and end caps Optional Features No Charge Specify on Order 1 /2" or 1 /4" spacer blocks Magnetic hold-down brackets Extension brackets (end mount only) EasyRise cord loop length Surcharge Specify on Order Accents by the Yard cut yardage Cord Loop Standard Cord Lengths (Color Coordinated) Shade height 16" to 26 7 1' Shade height 27" to 39 7 2' Shade height 40" to 59 7 3' Shade height 60" to 83 7 4' Shade height to 107 7 5' Shade height to 120" 6' HOW TO PRICE Important Note! All base prices are predicated on Ordered Dimensions, not Finished Dimensions. Add any necessary surcharges to the base prices shown on price charts 1 to 6 (see pages VI-14 to VI-19). Price Two-On-One Headrail shades as two individual Vignette with EasyRise standard shades. EXCLUSIONS Two-On-One Headrail as end (EB) mount ORDERING CHECKLIST 4 Specify inside (IB), outside (OB) or end (EB) mount. 4 Standard only: specify cord placement (left or right). 4 Specify optional cord loop length, if desired. 4 Specify side-by-side fold alignment, if desired (see page VI-40). 4 Specify any optional mounting hardware. 4 Two-On-One Headrail only: specify unequal panel widths, if desired. Overall shade width cannot exceed 140". 4 Specify optional Accents by the Yard cut yardage, if desired. Notes Pattern alignment between headrail and shade cannot be guaranteed with patterned fabrics. Two-On-One Headrail shades will be fabricated with a seam in the fabric covering the headrail. Some maximum width single-panel shades may have a seam in the fabric covering the headrail due to the raw material fabric width. Occasionally, when a shade is fully raised one fold may not be completely concealed inside the headrail, which causes an uncaptured fold. This product characteristic is a result of a shade s height and can vary from fabric to fabric.. See page VI-13 for additional notes. Effective 5/16/17 Go to the online Reference Guide at my.hunterdouglas.com for the most up-to-date information. VI-27
Traditional Style Top-Down/Bottom-Up Product Specifications APPLICATIONS Traditional Style: Shades roll up into the headrail. 4" full fold only. Available with EasyRise and UltraGlide systems. Fits rectangular window openings. Shades open from the top down or the bottom up. Single control cord operation. Size Standards See Size Standards on page VI-4 Mounting Requirements Minimum casement depth 1" Minimum casement depth, fully recessed 4" Minimum mounting surface height 1" Recommended width overlap, per side 4" Recommended top overlap 3 1 /4" Minimum mounting surface depth 1 1 /2" Finished Dimensions (All allowances are taken from ordered dimensions and may vary ± 1.) Headrail unit - 3 /16" Shade height + 1 /4" Fabric width -1 1 Headrail unit ordered width Shade height + 1 /4" Fabric width - 15 /16" Headrail unit - 11 /16" Shade height + 1 /4" Fabric width -1 5 Note: Maximum shade height deduction is 1 /4". Optional Features No Charge Specify on Order 1 /2" or 1 /4" spacer blocks Magnetic hold-down brackets Extension brackets (end mount only) EasyRise cord loop length Surcharge Specify on Order Top-Down/Bottom-Up UltraGlide system Accents by the Yard cut yardage IMPORTANT In accordance with the revised American National Standard for Safety of Corded Window Covering Products, EasyRise shades require proper mounting of the cord tensioner for the product to function properly. The cord tensioner should not be modified in any way. Hardware Included Standard installation brackets Color-coordinated cord/cord loop, tassel/ tensioner and end caps Edge Gaps (from window opening edge to fabric) Control side 5 Free side 1 /2" Abutted Shades Free side against free side 15 /16" Free side against control side 1 1 /16" Control side against control side 1 3 /16" Notes UltraGlide cord length will be equal to 60% of shade height, and may be shortened for enhanced child safety. Fabric stack height in Top-Down position equals up to 20% of the shade height. Pattern alignment between the fabriccovered headrail, mid-rail, bottom rail, and shade cannot be guaranteed with patterned fabrics. Some maximum width single panel shades may have a seam in the fabric covering the headrail due to the raw material fabric width. Shade fabricated height is measured with the mid-rail positioned directly under the rotator rail. The cord guides and rotator rail will be visible when the shade is in the lowered position. Occasionally, when a shade is fully raised one fold may not be completely concealed inside the headrail, which causes an uncaptured fold. This product characteristic is a result of a shade s height and can vary from fabric to fabric. See page VI-13 for additional notes. Cord Loop (EasyRise Only) EasyRise Cord Lengths (Color Coordinated) Shade height 16" to 26 7 1' Shade height 27" to 39 7 2' Shade height 40" to 59 7 3' Shade height 60" to 83 7 4' Shade height to 5' Guide Cords Widths less than 30" Widths over 30" (light filtering) Widths over 30" (room darkening) *Some fabrics may require five cords. HOW TO PRICE Important Note! All base prices are predicated on Ordered Dimensions, not Finished Dimensions. Add all applicable surcharges to base prices shown on price charts 1 to 6 (see pages VI-14 to VI-19). EXCLUSIONS 6" flat fold Tiered Architella Two-On-One Headrail LiteRise operating system PowerView Motorization 2 cords 3 cords 4 cords* ORDERING CHECKLIST 4 Specify inside (IB), outside (OB) or end (EB) mount. 4 Specify cord placement (left or right). 4 Specify optional cord loop length for EasyRise shades, if desired. 4 Specify side-by-side fold alignment, if desired (see page VI-40). Alignment is only applicable to side-by-side Top- Down/Bottom-Up shades. 4 Specify any optional mounting hardware. 4 Specify optional Accents by the Yard cut yardage, if desired. 3 3 /16" 4" 2 1 /4" 2" Headrail Dimensions VI-28 Go to the online Reference Guide at my.hunterdouglas.com for the most up-to-date information. Effective 5/16/17
Traditional Style PowerView Motorization Product Specifications APPLICATIONS Shades roll up into the headrail. 4" full fold and 6" flat fold Fits rectangular window openings. Remote control battery-powered operation. Size Standards See Size Standards on page VI-6 and VI-7 Mounting Requirements Minimum casement depth Built-in battery wand 1 3 Satellite battery pack or DC power supply 1" Minimum casement depth, fully recessed Built-in battery wand 4 1 /2" Satellite battery pack or DC power supply 4" Minimum rear fabric clearance 1 * Minimum mounting surface height 1" Recommended width overlap per side 4" Minimum rear fabric clearance 1 Minimum mounting surface depth Built-in battery wand 2" Satellite battery pack or DC power supply 1 1 /2" * Outside mounts with battery wand require 3 /4" spacer blocks (included). Finished Dimensions (All allowances are taken from ordered dimensions and may vary ± 1.) Headrail unit - 3 /16" Shade height - 1 Fabric width -1 1 Headrail unit ordered width Shade height - 1 Fabric width - 15 /16" Headrail unit - 11 /16" Shade height - 1 Fabric width -1 5 Hardware Included Installation brackets Color-coordinated end caps Spacer blocks (battery wand outside mounts) Optional Features No Charge Specify on Order Spacer blocks Extension brackets (end mount only) Magnetic hold-down brackets Surcharge Specify on Order PowerView option and accessories Accents by the Yard cut yardage Note: See page VI-24 for PowerView surcharges. Edge Gaps (from window opening edge to fabric) Motor side 5 Free side 1 /2" Abutted Shades Free side against free side 1" Free side against motor side 1 1 Control side against motor side 1 1 /4" HOW TO PRICE Important Note! All base prices are predicated on Ordered Dimensions, not Finished Dimensions. Base prices shown on price charts 1 to 6 (see pages VI-14 to VI-19). Add PowerView surcharge and any other necessary surcharges to base price (see page VI-24). EXCLUSIONS Top-Down/Bottom-Up Two-On-One Headrail Headrail Dimensions 4 1 /2" Battery Wand 4" Satellite Battery Pack, C-Size Satellite Battery Wand or DC Power Supply Battery Wand Installation Bracket ORDERING CHECKLIST 4 Specify inside (IB), outside (OB) or end (EB) mount. 4 Specify if additional spacer blocks or extension brackets are needed, and any other optional mounting hardware. 4 Specify side-by-side fold alignment, if desired (see page VI-40). 4 Specify left- or right-side motor and manual control button placement. 4 Specify number and colors of PowerView Pebble Remotes and/or PowerView Surface Remotes). 4 Specify PowerView Hub and additional PowerView Repeaters, if desired. 4 Specify additional PowerView accessories, if desired (see page VI-24). 4 If ordering satellite battery pack, C-size satellite battery wand or DC power supply, specify cable length. See page VI-24. 4 Specify daisy-chain cable lengths if daisy-chaining shades (requires DC power supply): 15", 4', 10' or 20'. 4 Specify optional Accents by the Yard cut yardage, if desired. Notes For more information regarding PowerView design, operation and accessories, please see the PowerView section of this Reference Guide. PowerView shades are fold aligned when shipped. Fold alignment will change with use and is not guaranteed after shipment. Each shade individually resets limits at various intervals depending upon use. Battery voltage variations can also affect fold alignment. In addition to our wireless control systems, Hunter Douglas provides hardwired motorized shades solutions for integration with automation systems. Please contact your fabricator to learn more about hard-wired options. See page VI-13 for additional notes. Effective 5/16/17 Go to the online Reference Guide at my.hunterdouglas.com for the most up-to-date information. VI-29
Tiered Style LiteRise Product Specifications APPLICATIONS Tiered Style: Shades stack from the bottom up. 4" full fold only. Fits rectangular window openings. Shades stack from the bottom up. Top-Down/Bottom-Up available. Shades stack from the top-down, bottom-up or both. Two-On-One Headrail available. Utilizes low-profile headrail. Size Standards See Size Standards on pages VI-8 and VI-9 Mounting Requirements Minimum casement depth* 7 Minimum casement depth, fully recessed 2 3 /4" Minimum mounting surface height 1" Recommended width overlap, per side 4" Recommended top overlap 2" Minimum mounting surface depth 2 3 /4" *Add 3 /4" for rear fabric fold clearance. Finished Dimensions (All allowances are taken from ordered dimensions and may vary ± 1.) Headrail unit width - 3 /16" Shade height + 1 Fabric width - 3 Headrail unit width ordered width Shade height + 1 Fabric width - 3 /16" Headrail unit width - 11 /16" Shade height + 1 Fabric width - 7 Two-On-One Headrail Approximate gap between fabric panels 1 Note: Maximum shade height deduction is 1 /4". Hardware Included Standard installation brackets Color-coordinated end caps and handle Light seal (inside mount only) Optional Features No Charge Specify on Order Spacer blocks Magnetic hold-down brackets Extension brackets Surcharge Specify on Order LiteRise system Top-Down/Bottom-Up LiteRise extension pole extends up to 51" Accents by the Yard cut yardage Edge Gaps (from window opening edge to fabric) Both sides 3 /16" Both sides 7 /16" Abutted Shades Gap between fabric panels 3 Notes Pattern alignment between headrail and shade cannot be guaranteed with patterned fabrics. Some maximum width single-panel shades may have a seam in the fabric covering the headrail due to the raw material fabric width. Fabric stack when fully raised equals up to 20% of shade height. Stack height when lowered top-down may vary. Tiered Style shades stack similar to typical Roman shades. As a result, you may see some initial creasing in the fabric folds. A light steaming will generally eliminate these creases. Do not steam the fabric covering the headrail. See page VI-13 for additional notes. HOW TO PRICE Important Note! All base prices are predicated on Ordered Dimensions, not Finished Dimensions. Add LiteRise surcharge to base prices shown on price charts 1 to 6 (see pages VI-14 to VI-19). For Top-Down/Bottom-Up shades, add LiteRise and Top-Down/Bottom-Up surcharges to base prices shown on price charts 1 to 6 (see pages VI-14 to VI-19). Add optional LiteRise extension pole surcharge, if required (see pages VI-14 to VI-19). Price Two-On-One Headrail shades as two individual shades, with the LiteRise surcharge added to each panel. EXCLUSIONS 6" flat fold ORDERING CHECKLIST 4 Specify inside (IB), outside (OB) or end (EB) mount. 4 Specify side-by-side fold alignment, if desired (see page VI-40). 4 Specify any optional mounting hardware. 4 Specify optional LiteRise extension pole, if desired. 4 Specify spacer blocks to allow for rear fabric fold clearance. 4 Specify optional Accents by the Yard cut yardage, if desired. 1 3 Headrail Dimensions 1 7 1" 3 /4" Raised Folds VI-30 Go to the online Reference Guide at my.hunterdouglas.com for the most up-to-date information. Effective 5/16/17
Tiered Style UltraGlide Product Specifications APPLICATIONS Tiered Style: Shades stack from the bottom up. 4" full fold only. Fits rectangular window openings. Top-Down/Bottom-Up available. Shades use two cord controls to stack from the top-down, bottom-up or both. Right cord operates the mid-rail and left cord operates the bottom rail; reverse controls are not available. Utilizes low-profile headrail. Size Standards See Size Standards on pages VI-8 and VI-9 Mounting Requirements Minimum casement depth* 7 Minimum casement depth, fully recessed 2 3 /4" Minimum mounting surface height 1" Recommended width overlap, per side 4" Recommended top overlap 2" Minimum mounting surface depth 2 3 /4" *Add 3 /4" for rear fabric fold clearance. Finished Dimensions (All allowances are taken from ordered dimensions and may vary ± 1.) Headrail unit width - 3 /16" Shade height - 1 Fabric width - 3 Headrail unit width ordered width Shade height - 1 Fabric width - 3 /16" Headrail unit width - 11 /16" Shade height - 1 Fabric width - 7 Note: Maximum shade height deduction is 1 /4". Hardware Included Standard installation brackets Color-coordinated cord, tassel and end caps Light seal (inside mount only) Optional Features No Charge Specify on Order Spacer blocks Magnetic hold-down brackets Extension brackets Surcharge Specify on Order UltraGlide system Top-Down/Bottom-Up Accents by the Yard cut yardage Notes Pattern alignment between headrail and shade cannot be guaranteed with patterned fabrics. Some maximum width single-panel shades may have a seam in the fabric covering the headrail due to the raw material fabric width. Cord length will be equal to 60% of shade height, and may be shortened for enhanced child safety. Fabric stack when fully raised equals up to 20% of shade height. Tiered Style UltraGlide shades stop below the first fold in the fully raised position to provide clearance for cord operation and may increase stack height beyond 20% of shade height. Stack height when lowered top-down may vary. Tiered Style shades stack similar to typical Roman shades. As a result, you may see some initial creasing in the fabric folds. A light steaming will generally eliminate these creases. Do not steam the fabric covering the headrail. See page VI-13 for additional notes. Edge Gaps (from window opening edge to fabric) Both sides 3 /16" Both sides 7 /16" Abutted Shades Gap between fabric panels 3 HOW TO PRICE Important Note! All base prices are predicated on Ordered Dimensions, not Finished Dimensions. Add UltraGlide surcharge to base prices shown on price charts 1 to 6 (see pages VI-14 to VI-19). Add Top-Down/Bottom-Up surcharge, if required, to UltraGlide price (see pages VI-14 to VI-19). EXCLUSIONS 6" flat fold Two-On-One Headrail ORDERING CHECKLIST 4 Specify inside (IB), outside (OB) or end (EB) mount. 4 Bottom-Up only: specify cord placement (left or right). 4 Specify side-by-side fold alignment, if desired (see page VI-40). 4 Specify any optional mounting hardware. 4 Specify spacer blocks to allow for rear fabric fold clearance. 4 Specify optional Accents by the Yard cut yardage, if desired. 1 3 Headrail Dimensions 1 7 1" 3 /4" Raised Folds Effective 5/16/17 Go to the online Reference Guide at my.hunterdouglas.com for the most up-to-date information. VI-31
Tiered Style EasyRise Product Specifications APPLICATIONS Tiered Style: Shades stack from the bottom up. 4" full fold only. Fits rectangular window openings. Two-On-One Headrail available. Top-Down/Bottom-Up available. Shades use two control cords to stack from the top-down, bottom-up or both. Right cord operates the mid-rail and left cord operates the bottom rail; reverse controls are not available. Utilizes low-profile headrail. Size Standards See Size Standards on pages VI-8 and VI-9 Mounting Requirements Minimum casement depth* 7 Minimum casement depth, fully recessed 2 3 /4" Minimum mounting surface height 1" Recommended width overlap, per side 4" Recommended top overlap 2" Minimum mounting surface depth 2 3 /4" *Add 3 /4" for rear fabric fold clearance. Hardware Included Standard installation brackets Color-coordinated cord loop, tensioner and end caps Light seal (inside mount only) Notes Pattern alignment between headrail and shade cannot be guaranteed with patterned fabrics. Some maximum width single-panel shades may have a seam in the fabric covering the headrail due to the raw material fabric width. Fabric stack when fully raised equals up to 20% of shade height. Stack height when lowered top-down may vary. Tiered Style shades stack similar to typical Roman shades. As a result, you may see some initial creasing in the fabric folds. A light steaming will generally eliminate these creases. Do not steam the fabric covering the headrail. See page VI-13 for additional notes. IMPORTANT In accordance with the revised American National Standard for Safety of Corded Window Covering Products, EasyRise shades require proper mounting of the cord tensioner for the product to function properly. The cord tensioner should not be modified in any way. Finished Dimensions (All allowances are taken from ordered dimensions and may vary ± 1.) Headrail unit width - 3 /16" Shade height - 1 Fabric width - 11 /16" Top-Down/Bottom-Up fabric width - 5 Headrail unit width ordered width Shade height - 1 Fabric width - 1 /2" Top-Down/Bottom-Up fabric width - 3 Headrail unit width - 11 /16" Shade height - 1 Fabric width -1 3 /16" Top-Down/Bottom-Up fabric width -1 1 /16" Two-On-One Headrail Approximate gap between fabric panels 1 /8 Note: Maximum shade height deduction is 1 /4". Optional Features No Charge Specify on Order Spacer blocks Magnetic hold-down brackets Extension brackets Surcharge Specify on Order Top-Down/Bottom-Up Accents by the Yard cut yardage Cord Loop Cord Lengths (Color Coordinated) Shade height 16" to 26 7 1' Shade height 27" to 39 7 2' Shade height 40" to 59 7 3' Shade height 60" to 83 7 4' Shade height to 101 7 5' Shade height to 118 7 6' Shade height 119" to 129 7 7'* Shade height 130" to 8'* *Available in white only. Edge Gaps (from window opening edge to fabric) Control side(s) 1 /2" Free side 3 /16" TDBU (each side) 5 /16" Control side(s) 3 /4" Free side 7 /16" Abutted Shades Free side against free side 1 Free side against control side 7 /16" Control side against control side 3 /4" HOW TO PRICE Important Note! All base prices are predicated on Ordered Dimensions, not Finished Dimensions. Add Top-Down/Bottom-Up surcharge, if required, to base prices shown on price charts 1 to 6 (see pages VI-14 to VI-19). Two-On-One Headrail with EasyRise shades are priced as two individual shades. EXCLUSIONS 6" flat fold ORDERING CHECKLIST 4 Specify inside (IB), outside (OB) or end (EB) mount. 4 Bottom-Up only: specify cord placement (left or right). 4 Specify side-by-side fold alignment, if desired (see page VI-40). 4 Specify any optional mounting hardware. 4 Specify spacer blocks to allow for rear fabric fold clearance. 4 Specify optional Accents by the Yard cut yardage, if desired. Headrail Dimensions 1 7 1 3 1" 3 /4" Raised Folds VI-32 Go to the online Reference Guide at my.hunterdouglas.com for the most up-to-date information. Effective 5/16/17
Tiered Style Architella Product Specifications APPLICATIONS Fits rectangular window openings. Shades stack from the bottom up. Available with LiteRise, UltraGlide or EasyRise operating systems. 4" full fold only; available with India Silk, Linen Weave, Pampa, Prairie, Sahara and Savannah fabrics only. Utilizes low-profile headrail. Size Standards See Size Standards on page VI-12 Mounting Requirements Minimum casement depth* 7 Minimum casement depth, fully recessed 3" Minimum mounting surface height 1" Recommended width overlap, per side 4" Recommended top overlap 2" Minimum mounting surface depth 2 3 /4" * Add 1" for rear fabric fold clearance. See the Mounting Dimensions illustration at right. Finished Dimensions (All allowances are taken from ordered dimensions and may vary ± 1.) Headrail unit width - 3 /16" Shade height LiteRise + 1 EasyRise and UltraGlide - 1 Fabric width - 3 Headrail unit width ordered width Shade height LiteRise + 1 EasyRise and UltraGlide - 1 Fabric width - 3 /16" Headrail unit width - 11 /16" Shade height LiteRise + 1 EasyRise and UltraGlide - 1 Fabric width - 7 Note: Maximum shade height deduction is 1 /4". Hardware Included Standard installation brackets Color-coordinated end caps and controls Optional Features No Charge Specify on Order Spacer blocks Magnetic hold-down brackets Extension brackets Surcharge Specify on Order LiteRise system UltraGlide system LiteRise extension pole extends up to 51" Accents by the Yard cut yardage Edge Gaps (from window opening edge to fabric) Both sides 3 /16" Both sides 7 /16" Abutted Shades Gap between fabric panels 3 Cord Loop (EasyRise Only) Cord Lengths (Color Coordinated) Shade height 16" to 26 7 1' Shade height 27" to 39 7 2' Shade height 40" to 59 7 3' Shade height 60" to 83 7 4' Shade height to 5' 1 3 Headrail Dimensions 1 7 3 /4" 1" 1" Raised Folds LiteRise and EasyRise Raised Folds UltraGlide HOW TO PRICE Important Note! All base prices are predicated on Ordered Dimensions, not Finished Dimensions. Add LiteRise or UltraGlide surcharge to base prices shown on price charts 7 and 8 (see page VI-20). Add optional LiteRise extension pole surcharge (see page VI-20). EXCLUSIONS 6" flat fold Top-Down/Bottom-Up Two-On-One Headrail Room-darkening fabrics ORDERING CHECKLIST 4 Specify inside (IB), outside (OB) or end (EB) mount. 4 Specify cord placement (left or right). 4 Specify side-by-side fold alignment, if desired (see page VI-40). 4 Specify any optional mounting hardware. 4 Specify optional LiteRise extension pole, if desired. 4 Specify spacer blocks to allow for rear fabric fold clearance. 4 Specify optional Accents by the Yard cut yardage, if desired. Notes Pattern alignment between headrail and shade cannot be guaranteed with patterned fabrics. Some maximum width single-panel shades may have a seam in the fabric covering the headrail due to the raw material fabric width. Fabric stack when fully raised equals up to 20% of shade height. Tiered Style UltraGlide shades stop below the first fold in the fully raised position to provide clearance for cord operation and may increase stack height beyond 20% of shade height. Tiered Style shades stack similar to typical Roman shades. As a result, you may see some initial creasing in the fabric folds. A light steaming will generally eliminate these creases. Do not steam the fabric covering the headrail. See page VI-13 for additional notes. Effective 5/16/17 Go to the online Reference Guide at my.hunterdouglas.com for the most up-to-date information. VI-33
Tiered Style PowerView Motorization Product Specifications APPLICATIONS Shades stack from the bottom up. 4" full fold only. Fits rectangular window openings. Remote control battery-powered operation. Top-Down/Bottom-Up available. Shades stack from the top-down or bottom-up. Two-On-One Headrail available. Shades share one headrail and operate independently. Each shade has its own motor. Panel widths may be equal or unequal; customer may specify split location. With unequal panels, the smaller panel must be at least one-third the measured width of the larger panel. Utilizes low-profile headrail. Size Standards See Size Standards on page VI-10 and VI-11 Mounting Requirements Minimum casement depth* 1 5 Minimum casement depth, fully recessed 2 3 /4" * Minimum mounting surface height 1 1 /4" Recommended width overlap per side 4" Minimum rear fabric clearance 3 /4" Minimum mounting surface depth 2 3 /4" * Includes 3 /4" for rear fabric fold clearance, which also provides battery wand clearance. Notes Stack height when lowered top-down may vary. PowerView shades are fold aligned when shipped. Fold alignment will change with use and is not guaranteed after shipment. Each shade individually resets limits at various intervals depending upon use. Battery voltage variations can also affect fold alignment. This also applies to Two- On-One Headrail shades. For more information regarding PowerView design, operation and accessories, please see the PowerView section of this Reference Guide. See page VI-13 for additional notes. Finished Dimensions (All allowances are taken from ordered dimensions and may vary ± 1.) Headrail unit width - 3 /16" Shade height - 1 Fabric width - 3 Headrail unit width ordered width Shade height - 1 Fabric width - 3 /16" Headrail unit width - 11 /16" Shade height - 1 Fabric width - 7 Two-On-One Headrail Approximate gap between fabric panels 1 Hardware Included Installation brackets and spacer blocks Color-coordinated end caps Optional Features No Charge Specify on Order Additional spacer blocks Extension brackets End (EB) mount brackets Magnetic hold-down brackets Surcharge Specify on Order PowerView option and accessories Top-Down/Bottom-Up Accents by the Yard cut yardage Note: See page VI-24 for PowerView surcharges. HOW TO PRICE Important Note! All base prices are predicated on Ordered Dimensions, not Finished Dimensions. Base prices shown on price charts 1 to 8 (see pages VI-14 to VI-19). Add PowerView surcharge and any other necessary surcharges to base price (see page VI-24). Price Two-On-One Headrail as two individual Vignette shades. Add PowerView surcharge(s) to each panel. Edge Gaps (from window opening edge to fabric) Both sides 3 /16" Both sides 7 /16" Abutted Shades Gap between fabric panels 3 EXCLUSIONS 6" flat fold Top-Down/Bottom-Up and Two-On-One Headrail options with Tiered Architella fabrics ORDERING CHECKLIST 4 Specify inside (IB), outside (OB) or end (EB) mount. 4 One spacer block is included with each installation bracket. 4 Specify if additional spacer blocks or extension brackets are needed, and any other optional mounting hardware. 4 Specify side-by-side fold alignment, if desired (see page VI-40). 4 Specify left- or right-side motor and manual control button placement. 4 Specify number and colors of PowerView Pebble Remotes and/or PowerView Surface Remotes. 4 Specify PowerView Hub and additional PowerView Repeaters, if desired. 4 Specify additional PowerView accessories, if desired (see page VI-24). 4 If ordering satellite battery pack, C-size satellite battery wand or DC power supply, specify cable length. See page VI-24. 4 Specify daisy-chain cable lengths if daisy-chaining shades (requires DC power supply): 15", 4', 10' or 20'. 4 Specify optional Accents by the Yard cut yardage, if desired. Headrail Dimensions 2 3 /4"* 2 1 /4"* 1" 1 3 3 /4" Raised Folds * 2 3 /4" = dimension with battery wand 2 1 /4" = dimension with satellite battery pack or DC power supply VI-34 Go to the online Reference Guide at my.hunterdouglas.com for the most up-to-date information. Effective 5/16/17
Traversed with Vertiglide Style Product Specifications APPLICATIONS Traversed Style: Side stack (left or right) Split stack (equal panels) Available in Stationary Stack or Moveable Stack configurations. Moveable Stack means the fabric panel(s) can be positioned and stacked anywhere on the headrail. 4" full fold only. Opens and closes from side to side; ideal for sliding glass doors, wide windows and French doors. Inside (IB) or outside (OB) mount. Size Standards See Size Standards on pages VI-8 and VI-9 Mounting Requirements Minimum casement depth 1 1 /2" Minimum casement depth, fully recessed Shade closed 4 1 /2" Shade stacked open 5 1 /2" Minimum mounting surface height No trim 1 1 /4" Mounted above 1" trim 2 3 /4" Recommended width overlap, per side 4" Recommended top overlap 4" Finished Dimensions (All allowances are taken from ordered dimensions and may vary ± 1.) Headrail unit (with end caps) - 3 /16" Fabric width (with vertical rails) - 3 /16" Shade height - 1 /2" Headrail unit (with end caps) ordered width Fabric width (with vertical rails) ordered width Shade height ordered height Optional Features No Charge Specify on Order 1 /2" spacer block (maximum one per bracket) Optional handle for secondary rail Split headrail for shades less than 192" wide Surcharge Specify on Order Split stack (equal panels, center opening) Fabric-covered returns to the wall* Accents by the Yard cut yardage * Fabric-covered end returns are available on secondary rail(s) only. Fabric Stackback (Including vertical rails.) Light Filtering Light Filtering Room Panel Width Moveable Stationary Darkening 18" 60" 12" 8" 13" 60 1 76" 12" 9" 14" 76 1 92" 12" 10" 16" 92" 1 12" 11" 17" 108 1 120" 12" 12" 19" 120 1 132" 13" 13" 20" 132 1 14" 14" 22" 144 1 156" 15" 15" 156 1 168" 16" 16" 168 1 180" 17" 17" 180 1 192" 18" 18" Note: Approximate fabric stacks are tightly compressed at the high end of each width range. Fabric Gaps Top of fabric to bottom edge of headrail 1 /4" Top of fabric to top of headrail 1 1 /2" Handle Height (From bottom of vertical rail to center of handle.) Shade height 36" 72" center of shade Shade height 72 1 96" 40" Shade height 96 1 50" Note: Non-standard handle height must be specified at time of order. Notes On fabrics with directional pattern, the pattern will run vertically on the headrail, and horizontally on the fabric panel and return; this does not match the directional pattern on standard Vignette shades. With outside mounts, projection into the room in the open position is 5 1 /2" and 4 1 /2" in the closed position. With inside mounts, a 1 /2" deduction for floor clearance will be taken from the ordered shade height. Shades that exceed the maximum fabric width will have seams in the fabric-covered headrail. Shades greater than 192" in width will feature two headrails that connect in the center. Optional split headrail is also available on shades less than 192" in width. See page VI-13 for additional notes. Hardware Included Standard installation brackets Magnetic secondary rail bracket(s) Color-coordinated end caps and handle HOW TO PRICE Important Note! All base prices are predicated on Ordered Dimensions, not Finished Dimensions. Base prices shown on charts 9 to 14 (see pages VI-21 to VI-23). For split stack designs, divide the full width measurement in half, price as two separate units and add the two prices together. EXCLUSIONS Extension brackets 6" flat fold Abutted shades End (EB) mount Tiered Architella ORDERING CHECKLIST 4 For outside mounts, allow recommended 4" overlap on the top and sides to minimize light leakage. 4 With outside mounts, consider minimum vertical mounting surface and desired floor clearance when specifying height. Note: Shade height is measured from the top of the headrail to the bottom of the shade. Be sure to allow for adequate floor clearance. 4 Account for fabric stackback if a fully uncovered opening is desired. 4 With inside mounts, a 1 /2" deduction for floor clearance will be taken from the ordered shade height. 4 Specify Stationary Stack or Moveable Stack configuration. 4 Specify stacking configuration. On split stack shades, both panels will be of equal width. 4 Specify non-standard handle height, if desired. 4 Specify optional handle for secondary rail(s), if desired. See page VI-39. 4 Specify spacer block, if desired. Maximum one spacer block per bracket. 4 Specify optional returns to the wall, if desired. Available on secondary non-handle rail(s) only. 4 Specify optional Accents by the Yard cut yardage, if desired. Effective 5/16/17 Go to the online Reference Guide at my.hunterdouglas.com for the most up-to-date information. VI-35
Specialty Shapes Product Specifications APPLICATIONS Fits the specialty shaped windows pictured below. All specialty shapes are stationary. Shades remain lowered and are nonoperable. 4" full fold and 6" flat fold. Available in all fabrics, except Tiered Architella. A perfect arch is an arch where the width is exactly two times the height. Template-free ordering may be used for imperfect arches and imperfect extended arches only if the width is more than two times the height of the arch portion. Size Standards See Specialty Shapes Size Standards on page VI-7 and illustrations on this page Mounting Requirements Minimum casement depth Angle 1 5 All other specialty shapes 1" Minimum casement depth, fully recessed All specialty shapes 2 7 HARDWARE SYSTEMS Arch and Specialty Shapes: Flexible mounting clips support the fabric and are installed into the window casement. Angles: Fabric-covered headrail is installed into the window casement using the provided mounting brackets. Bottom rail rests on sill or on Vignette headrail when positioned above a standard rectangular shade. Arches, angles and most trapezoids are fabricated with a standard bottom rail. HOW TO PRICE Important Note! All base prices are predicated on Ordered Dimensions, not Finished Dimensions. Base prices shown on price charts 1 to 6 (see pages VI-14 to VI-19). Add specialty shapes surcharge. EXCLUSIONS Outside (OB) mount Tiered Architella Side-by-side fold alignment Ordering Notes All indicated measurements below are required for template-free ordering. Take measurements at the widest point. Do not take any deductions. All deductions will be taken at the factory. Taller side determines left or right angle. Templates are not required for the specialty shapes pictured below, except as noted. See instructions on the order form and General Information section Measuring Guidelines. When placing a template-free order, do not mark Template Required on the order form. Specialty shape deduction is 1 /4" on all sides. For additional specialty shape information, please contact your Hunter Douglas fabricator. Perfect and Imperfect Arch Circle Oval Right Angle Left Angle Height Width Height Height Left/ Side 1 Right/ Side 2 Left/ Side 1 Right/ Side 2 Perfect and Imperfect Extended Arch Width Width Width Width Left/ Side 1 Left Side Reductions Height Width Trapezoid Top Rail Width Height Right/ Side 2 Bottom Rail Width Right Side Reductions Left Quarter Circle Width Left Side Reductions Height Right Quarter Circle Height Inverted Trapezoid Top Rail Width Height Bottom Rail Width Width Right Side Reductions Width Hexagon* Height Right/ Side 1 Right/Side 2 Left/ Side 1 Width Octagon* Height Left/Side 1 Left/Side 1 Width Width * Each side must be equal for template-free ordering. If all dimensions are not the same, a template is required. Right/Side 2 VI-36 Go to the online Reference Guide at my.hunterdouglas.com for the most up-to-date information. Effective 5/16/17
Traditional Manual Operating Systems Design and Operation LITERISE OPERATION Shades roll up inside the standard profile headrail when raised. The cordless operating system offers ease of operation combined with enhanced child safety. Note: Narrower, longer drop shades will have more spring action than standard size shades. To Lower the Shade Gently pull down on the bottom rail handle. The shade will retract slightly to the desired height. To Raise the Shade Gently pull down on the handle to engage the shade. Using the handle, steadily raise the shade into the headrail or retract the shade to the desired position. LITERISE CAUTION: Releasing the shade without the handle control may cause the fabric panel to retract suddenly, allowing the bottom rail inside the headrail. Lower ULTRAGLIDE OPERATION To Lower the Shade Pull the cord toward the center of the shade using long, even strokes. Allow the cord to retract between strokes. Continue until the shade is fully lowered and rotated back toward the window. To Raise the Shade Using long, even strokes, pull the cord straight down or to the outside of the shade. Allow the cord to retract between strokes. ULTRAGLIDE CAUTION: To avoid damage to the shade or personal injury, do not let go of the cord until it is fully retracted. Non-Operable Zone Lower Raise TOP-DOWN/BOTTOM-UP Shades can be operated from the top-down or bottom-up with the EasyRise continuous cord loop or UltraGlide single retractable cord systems. Available only with 4" full fold. Lift cords are concealed between the front and rear fabrics for a clean exterior appearance. Fabric-covered headrail conceals fabric when fully raised. Fabric folds stack neatly at the bottom when lowered top-down, maintaining the full fold shape. One full fold remains above the fabric stack when fully lowered. EasyRise Top-Down/Bottom-Up Operation Pull on the front of the cord loop to lower the shade. When the shade is fully lowered, continuing to pull on the cord lowers the shade panel from the top-down. The fabric folds stack neatly at the bottom of the window when lowered from the top-down. To raise the shade, pull on the rear of the cord loop. If fully lowered top-down, the shade panel will first raise up to the headrail, and then the fabric will roll up to conceal itself inside the headrail. Raise First Pull Down Slightly Non-Operable Zone OR UltraGlide Top-Down/Bottom-Up Operation Basic operation is the same as bottom-up UltraGlide shades. Once the shade is completely lowered, continue to pull the cord toward the center to lower the mid-rail. Use long, even strokes and allow the cord to retract between strokes. EASYRISE OPERATION To Lower the Shade Pull on the front of the cord to lower and fully retract the shade. To Raise the Shade Pull on the rear of the cord to raise the shade. To raise the mid-rail, pull the cord straight down or to the outside of the shade. Once the mid-rail reaches the headrail, continue to pull the cord the same way to fully raise the shade. Top-Down/Bottom-Up Design Note that when the shade panel fully covers the window, there is approximately 1 3 /4" between the rear of the fabric and the window or mounting surface. Effective 5/16/17 Go to the online Reference Guide at my.hunterdouglas.com for the most up-to-date information. VI-37
Tiered Manual Operating Systems Design and Operation LITERISE OPERATION Shades feature a low-profile headrail fabric stacks at the top of the window when fully raised. Shades are manually leveled. To Lower and Raise the Shade Use the handle to lower or raise the shade. An extension pole is available to operate hard-to-reach LiteRise shades. Allow the cord to retract after each downward stroke. Use multiple strokes until the shade reaches the desired position. ULTRAGLIDE CAUTION: To avoid damage to the shade or personal injury, do not let go of the cord until it is fully retracted. LiteRise Top-Down/ Bottom-Up Operation Handles are attached to both the bottom rail and the mid-rail. Use the handles to position the fabric as desired. LiteRise Top-Down/Bottom-Up Operation Lower and Raise Lower Pull cord toward center of shade at 45º angle, click and release. EASYRISE OPERATION To Lower and Raise the Shade Pull on the rear of the cord loop to lower the shade. Pull on the front of the cord loop to raise the shade. ULTRAGLIDE OPERATION To Lower the Shade Pull the cord toward the center of the shade at about a 45 angle. A locking mechanism at the top of the cord releases with a click. To stop the shade while lowering, move the cord back toward the vertical position and give a slight downward pull, until the locking mechanism engages. If a shade hits an obstruction as it is lowered it will stop. To Raise the Shade Pull the cord straight down or slightly toward the outside. With each stroke the shade partially raises. TOP-DOWN/BOTTOM-UP Shades can be operated from the topdown, bottom-up or both with the LiteRise, UltraGlide or EasyRise systems. Available only with 4" full fold. Raise Pull the cord straight down with short strokes. Lift cords are concealed between the front and rear fabrics for a clean exterior appearance. Fabric folds stack neatly at the top and bottom maintaining the full fold shape. One full fold remains above the fabric stack when fully lowered. UltraGlide and EasyRise Top-Down/ Bottom-Up Operation With these corded shades, the right cord operates the mid-rail and the left cord operates the bottom rail. Reverse Controls are not available. UltraGlide Top-Down/Bottom-Up Operation Right Cord Operates Middle Rail Top-Down/Bottom-Up Design VI-38 Go to the online Reference Guide at my.hunterdouglas.com for the most up-to-date information. Effective 5/16/17
Traversed Operating Systems Design and Operation TRAVERSED STYLE WITH VERTIGLIDE Offers a totally coordinated room solution combining horizontal shades with the convenience and easy operation of vertical window coverings. Ideal for expansive windows and doors. Available with all Vignette fabrics, 4" full fold only. Available with Moveable Stack or Stationary Stack options. With Moveable Stack, the fabric panel(s) can be positioned and stacked anywhere along the span of the headrail. Left, right and split stack options. One handle is standard on one-way and split stack moving rail(s). Optional handle must be requested at time of order for the secondary moving rail with the Moveable Stack design. On fabrics with directional pattern, the pattern will run vertically on the headrail, and horizontally on the fabric panel and return; this does not match the directional pattern on standard Vignette shades. For product specifications see page VI-35. Left Stack Right Stack Split Stack (Equal Panels) TRAVERSED WITH VERTIGLIDE RETURN(S) TO THE WALL Outside Mount Non-Handle Stationary or Secondary Moving Rails Only Without Return to the Wall (Outside Mount Shown) With Return to the Wall (Outside Mount Shown) Optional return minimizes light leakage and must be requested at time of order. Notes Traversed Vertiglide shades may need to be dressed for best appearance. Dressing the fabric is achieved by fully opening the shade and closing to the desired position. Use the handle to operate a Traversed Vertiglide shade. A slight indentation in the fabric may occur from the hand. Should this occur, the fabric can be dressed for best appearance. For inside (IB) mount Traversed with Vertiglide applications, a 1 /2" deduction for floor clearance will be taken from the ordered shade height. See page VI-13 for additional information. Effective 5/16/17 Go to the online Reference Guide at my.hunterdouglas.com for the most up-to-date information. VI-39
Design and Operation SHADE ADJUSTABILITY Shades should wind evenly and not skew to one side. If skewing does occur: Ensure headrail was installed level; shim if necessary. Adjust placement of weight in bottom rail 1" at a time, toward side where fabric is gathering. With Top-Down/Bottom-Up shades, if the mid-rail is not level, you can adjust it by hand (Tiered stacking style) or use the self-leveling feature by rolling up the shade (Traditional rolling style) completely into the headrail. SIDE-BY-SIDE FOLD ALIGNMENT When horizontal shades are installed side by side, fold alignment can be guaranteed within 1 /4" only if: Shades are ordered at the same time and in the identical style, fabric, height, operating system and application. Shades that need to be aligned must be specified on the order form. Fold alignment cannot be guaranteed for different operating systems or applications combined on the same order. An Important Note About Textiles All Vignette fabrics consist of 100% polyester. Upon arrival and regular usage, shades may need to be dressed or steamed for best appearance. Slight creasing or wrinkles may appear in the fabric folds on all Vignette styles. A light steaming will generally eliminate the creases or wrinkles. Using a hand-held steamer four to six inches from the shade. For full fold styles, steam the face fabric from the bottom to the top, making sure to get steam under each fabric fold. For flat fold styles, steam across the fabric folds. Be careful not to saturate the fabric with steam. Allow the shade to dry completely before raising. Note: Do not steam the fabric on the headrail, mid-rail or bottom rail. For detailed steaming instructions, reference the Vignette Steaming video on YouTube or The Learning Center. As with all textiles, Vignette fabrics are subject to some variations in fabric weave. For example, the alignment of vertical stripe fabrics may not always match perfectly with the side edges or fabric-covered headrail of the finished shade. With all Vignette fabrics, the perpendicular orientation of the vertical and horizontal yarns may be slightly imperfect. These subtle variances fall within textile industry standards and should be considered as normal, acceptable quality. Consumer testing has indicated that these variations do not detract from the product s appeal. Variations in color or pattern irregularities are unique characteristics that contribute to the classic beauty of the product and should be considered as normal, acceptable quality. For lighter weight fabrics on Tiered and Traversed Style shades, you may see slight bumps within the shade. This is due to the inner cord attachment necessary to operate the shade. SHADE HEIGHT VARIANCE Shade height is adjusted at the bottom of the shade. The last fold may be longer or shorter than the others to achieve the ordered height. In shades of varying height, the length of the last fold may vary from shade to shade. Shade Height Variance VI-40 Go to the online Reference Guide at my.hunterdouglas.com for the most up-to-date information. Effective 5/16/17