Live centers and face driver for turning and grinding General catalogue
TECNOLOGIE FR Since 1960 TECNOLOGIE FR has designed, manufactured and marked many different patented product lines that are truly innovative and incorporate advanced technology turning, gear cutting and grinding concepts. Tecnologie FR has been heavily investing in research and development right from its inception, keeping a breast of the latest technical advances and constantly improving their product performances. This has ensured a long term relationship with many leading multinational companies. TECNOLOGIE FR also works closely with leading machine tools manufacturers. 1
CONTENTS LIVE CENTERS FOR TURNING FACE RIVERS TYPE SPECIAL FOR TURNING WITH INTEGRAL FLANGE OPERATE Y SPRINGS Live centers with axial load distribution. The only mechanism of its kind in the world The extraction nut FR 80 series live center with axial load distribution pag. 03 pag. 04 pag. 05 Face driver 6/ SPECIAL Face driver 15/55 SPECIAL Face driver /70 SPECIAL Face driver 45/1 SPECIAL pag. 19 pag. pag. pag. 22 FR 85 series live center with axial load distribution pag. 05 Face driver 100/2 SPECIAL pag. 23 FR 80 series live center with axial load distribution and adjustable radial taper roller bearing. Lubricated with special maintenance free grease FR 85 series live center with axial load distribution and radial cylindrical roller bearing. Lubricated with special maintenance free grease Interchangeable center for FR live centers with axial load distribution pag. 06 pag. 08 pag. 10 FACE RIVERS TYPE SPECIAL FOR TURNING FLANGE, WITH WORK POSITIONING REFERRE TO THE CENTRE OF THE WORKPIECE, OPERATE Y HYRAULIC CYLINER Face driver 15/55 SPECIAL Face driver /70 SPECIAL Face driver 45/1 SPECIAL pag. pag. pag. FR 80 series head carrying live center for pipe turning with axial load ditribution and adjustable radial taper roller bearing with support and extraction nut. Lubricated with special maintenance free grease. FR 85 series head carrying live center for pipe turning with axial load ditribution and adjustable radial cylindrical roller bearing with support and extraction nut. Lubricated with special maintenance free grease. pag. 12 pag. 12 Face driver 100/2 SPECIAL Face driver 180/0 SPECIAL FACE RIVER FOR GRINING Instructions for selecting axial load parameters on face drivers live centres riving pin face plate centering shaft pag. 27 pag. pag. pag. Heads for turning and grinding of pipes pag. 13 Face driver for grinding ø 7/ operated by pneumatic or hydraulic cylinder pag. FACE RIVER FOR TURNING TechnIcal features of FR face drivers for centered shafts How the wedge lever system works Instructions for a correct maintenance of the face driver functional features pag. 14 pag. 14 pag. 15 Face driver for grinding Ø 12/70 operated by pneumatic or hydraulic cylinder Face driver for grinding Ø /100 operated by pneumatic or hydraulic cylinder Face driver for grinding Ø 45/150 operated by pneumatic or hydraulic cylinder pag. 31 pag. 32 pag. 33 Using the center points with slots in face drivers operated by springs pag. 15 LIVE CENTER FOR GRINING pag. 34 Clamping face drivers with integral flange on self-centering chuck pag. 16 FR face driver Adaptors pag. 17 2
LIVE CENTERS FOR TURNING LIVE CENTERS WITH AXIAL LOA ISTRIUTION. THE ONLY MECHANISM OF ITS KIN IN THE WORL TECHNICAL SPECIFICATIONS The FR patented live center with axial load distribution has two thurst bearings o and p between which a specially designed belleville spring washer e is inserted to distribute the load between the two bearings. When a thrust acts on the center b it will retract up to 0. mm which corresponds to 500 Kg of axial load for the FR live center morse taper 4 that is absorbed by the back bearing p. As the center shaft c has now moved inside by 0. mm it comes to rest on the inner ring of the roller bearing n, thereby transmitting the remaining force to the front bearing o. This patented center allows the center to apply a very high rate of live center thrust to the process. When turning shafts held by face driver, this live center allows machining with higher feed rate and cutting depth. The two roller cages k support heavy radial loads, and a vibrations-damping bush g kept stiff by a spring h which prevents vibration. The adjustment ring d at the front of the live center can be adjusted during the life of the center. A chip guard ring j guarantees complete insulation of the sealing ring l from chips. The back extraction nut i prevents deflection and vibration. PATENTE 6 8 7 11 1 9 16 5 15 14 13 4 12 10 3 2 a b c d e f Live center body Center Shaft Adjustment ring elleville spring washer End cap g h i j k l Vibration-damping bush Spring Extraction nut Chip guard ring Roller cages Sealing ring m n o p Retaining screw Roller bearing Front bearing ack bearing 3
LIVE CENTERS FOR TURNING THE EXTRACTION NUT THE EXTRACTION NUT The extraction nut is fitted on the basic body to give the live center maximum stiffness and check deflection or vibrations caused by deformation of the basic body. To fix, follow this procedure: (a) fix the live center in the moving block; (b) unscrew the nut until it comes to rest on the live center sleeve; (c) when it is in position tighter firmly with both hands. (1) Live center sleeve. (2) Live center nut in position on the live center sleeve. REMOVING THE INTERCHANGEALE CENTER Fit the spanner around the live center shaft and rotate firmly as when tightening a screw. AJUSTING THE 80 SERIES LIVE CENTERS To ensure setting accuracy and avoid vibrations the live centers must occasionally be adjusted using the following procedure: tighten the nut until the cylindrical roller bearing ring is positioned firmly on the tapers. (1) Loosening the adjusting nut screw. (2) Use torque wrench for loosening or tightening the live center adjusting nut. The 85 live centers need no adjusting. Note: As the live centers have axial load distribution when are not against the workpiece (so not subjected to axial load) they do not travel smoothly; this is due to the counter pressure of the spring which distributes the axial load between the two thrust bearings. 4
LIVE CENTERS FOR TURNING FR 80 SERIES LIVE CENTER WITH AXIAL LOA ISTRIUTION AN TAPER ROLLERS EARING FEATURES The 80 series is the basic series and has the following features: the front bearing has tapered rollers that can be adjusted by a ring nut. This bearing has been lubricated by the factory and requires no maintenance for the working life of the live center. About every 900 operating hours the tapered rollers bearing fit can be checked and adjusted, if needed, by means of the adjusting ring. For working parameters see charts at page 7. This significantly reduces live center down time and at the same time, it is possible to work with greater radial and axial loads. This live center is suitable for average to heavy duty tasks. 80 SERIES FR 85 SERIES LIVE CENTER WITH AXIAL LOA ISTIUTION AN CYLINRICAL ROLLERS EARING FEATURES The 85 series was created to solve the problem of the high rotation speeds and heavy loads of modern CNC lathes. To enable the live center to operate at such high speeds the radial taper rollers bearing has been replaced by a twin race of radial cylindrical rollers bearing. Another advantage of this series is that no adjustment is required as the bearing assembly consists of cylindrical rollers bearing. This bearing has been lubricated by the factory and requires no maintenance for the working life of the live center. This live center is suitable for all types of light and heavy duty tasks. 85 SERIES FOR FURTHER AN MORE ETAILE INFORMATION, CONTACT OUR TECHNICAL OFFICE 5
LIVE CENTERS FOR TURNING FR LIVE CENTER WITH AXIAL LOA ISTRIUTION AN AJUSTALE RAIAL TAPER ROLLER EARING. LURICATE WITH SPECIAL MAINTENANCE FREE GREASE (with support and extraction nut) LIVE CENTER WITH INTECHANGEALE CENTER SUPPORT SHAFT 80 SERIES E C F A H FEATURES The interchangeable center enables the operator to rapidly fit the center required for the task at hand and to easily replace centers without having to change the complete shaft. It is therefore ideal for a working environment in which different types of machining are carried out. 0101801 010180131 010180141 010180151 010180161 Morse Taper C 38 43 48,5 54 65 56.5 68 123 E 67 103 136 189 imensions in mm. A 49 56.5 80 119 34 43 F 161 188.5 9.5 272 376 H 58 66 74 88 1 Notes: The live center is fitted with an FR 95 center as standard (as illustrated). For other types of center see page 10-11. Special kinds of center can be supplied on request. LIVE CENTER WITH INTEGRAL SHAFT FEATURES The integral shaft guarantees greater stiffness and ensures extremely small runout error (measured at the tip and on the workpiece). It is therefore suitable for tasks requiring high precision and because of the reduced protrusion of the shaft from the body, it is also suitable for machining very heavy workpieces. 010180123 010180133 010180143 010180153 010180163 Morse Taper C 35.5 40 45 67 56.5 68 123 E 67 103 136 189 imensions in mm. A 49 56.5 80 119 33 36 57.5 F 151 181 1 3 378 H 58 66 74 88 1 LIVE CENTER WITH INTEGRAL SHAFT AN CARIE TIP INSERT FEATURES This live center is also used for turning parts without centers or with rough centers. The integral shaft ensures extremely small runout error (measured at the tip and on the workpiece) and its superior stiffness reduces working vibrations. 0101801 010180135 010180145 010180155 010180165 Morse Taper C 35.5 40 45 67 56.5 68 123 E 67 103 136 189 imensions in mm. A 49 56.5 80 119 33 36 57.5 F 151 181 1 3 378 d 6 10 12 14 H 58 66 74 88 1 6
LIVE CENTERS FOR TURNING FR LIVE CENTER WITH AXIAL LOA ISTRIUTION AN AJUSTALE RAIAL TAPER ROLLER EARING. LURICATE WITH SPECIAL MAINTENANCE FREE GREASE (with support and extraction nut) LIVE CENTER WITH EXTENE INTEGRAL SHAFT 80 SERIES FEATURES The extended integral shaft ensures extremely small runout error on the workpiece and its slender point makes it ideal for machining thin workpieces, even when close to the live center. This live center is therefore ideal for precision machining of small sized components. 0101801 010180134 010180144 010180154 010180164 Morse Taper C 47 55 60 90 56.5 68 123 E 67 103 136 189 imensions in mm. A 49 56.5 80 119 33 36 57.5 F 170 0.5 231 0 401 G 8 12 14 16 H 58 66 74 88 1 LIVE CENTER WITH EXTENE INTEGRAL SHAFT AN CARIE TIP INSERT FEATURES 0101801 010180136 010180146 010180156 010180166 Morse Taper C 47 55 60 90 56.5 68 123 E 67 103 136 189 imensions in mm. A 49 56.5 80 119 33 36 57.5 F 170 0.5 231 0 401 G 8 12 15 18 d 1 6 10 12 14 H 58 66 74 88 1 It is used in special cases for turning parts without centers or with rough centers. The extended integral shaft ensures extremely small runout error on the workpiece and its slender point makes it ideal for machining thin workpieces, even when close to the live center. This live center is therefore ideal for precision machining of small sized components. LOA CHARTS Q [kg.] 64 80 100 1 160 0 0 3 400 500 640 800 1000 10 1600 00 00 30 4100 50 37 RAIAL LOA in (WORKPIECE WEIGHT) 52 75 110 160 2 3 480 700 1000 1450 00 00 4400 6400 9500 n [r.p.m.] Values referred to a live center life of about 00 operating hours Pa [kg.] 160 0 0 3 400 500 640 800 1000 10 1600 00 00 4000 50 6600 80 10400 100 37 52 75 AXIAL LOA in 110 160 2 3 480 700 1000 1450 00 00 4400 6400 9500 n [r.p.m.] Values referred to a live center life of about 00 operating hours Notes: The load values refer to the model with an integral shaft and a live center life of about 00 operating hours. Tests have shown that the live center can however be used for a longer or shorter period, depending on the types of machining task it undertakes. For other types of live center (with interchangeable center and extended integral shaft) the load values indicated on the graphs should be reduced. Example: Permitted maximum loads for the live center with integral shaft at n = 1000 r.p.m. Radial load Q = 3 kg Axial load Pa = 900 kg 7
LIVE CENTERS FOR TURNING FR LIVE CENTER WITH AXIAL LOA ISTRIUTION AN RAIAL CYLINRICAL ROLLER EARING. LURICATE WITH SPECIAL MAINTENANCE FREE GREASE (with support and extraction nut) LIVE CENTER WITH INTERCHANGEALE CENTER SUPPORT SHAFT 85 SERIES E C F A H FEATURES The interchangeable center enables the operator to rapidly fit the center required for the task at hand and to easily replace centers without having to change the complete shaft. It is therefore ideal for a working environment in which different types of machining are carried out. 0101851 010185131 010185141 010185151 010185161 Morse Taper C 38 43 48.5 54 65 56.5 68 123 E 67 103 136 189 imensions in mm. A 49 56.5 80 119 34 43 F 161 188.5 9.5 272 376 H 58 66 74 88 1 Notes: The live center is fitted with an FR 95 center as standard (as illustrated). For other types of center see page 10-11. Special kinds of center can be supplied on request. LIVE CENTER WITH INTEGRAL SHAFT FEATURES The integral shaft guarantees greater stiffness and ensures extremely small runout error (measured at the tip and on the workpiece). It is therefore suitable for tasks requiring high precision and because of the reduced protrusion of the shaft from the body, it is also suitable for machining very heavy workpieces. 010185123 010185133 010185143 010185153 010185163 Morse Taper C 35.5 40 45 67 56.5 68 123 E 67 103 136 189 imensions in mm. A 49 56.5 80 119 33 36 57.5 F 151 181 1 3 378 H 58 66 74 88 1 LIVE CENTER WITH INTEGRAL SHAFT AN CARIE TIP INSERT FEATURES This live center is also used for turning parts without centers or with rough centers. The integral shaft ensures extremely small runout error (measured at the tip and on the workpiece) and its superior stiffness reduces working vibrations. It is therefore suitable for high precision machining. 0101851 010185135 010185145 010185155 010185165 Morse Taper C 35.5 40 45 67 56.5 68 123 E 67 103 136 189 imensions in mm. A 49 56.5 80 119 33 36 57.5 F 151 181 1 3 378 d 1 6 10 12 18 H 58 66 74 88 1 8
LIVE CENTERS FOR TURNING FR LIVE CENTER WITH AXIAL LOA ISTRIUTION AN RAIAL CYLINRICAL ROLLER EARING. LURICATE WITH SPECIAL MAINTENANCE FREE GREASE (with support and extraction nut) LIVE CENTER WITH EXTENE INTEGRAL SHAFT 85 SERIES FEATURES The extended integral shaft ensures extremely small runout error on the workpiece and its slender point makes it ideal for machining thin workpieces, even when close to the live center. This live center is therefore ideal for precision machining of small sized components. 0101851 010185134 010185144 010185154 010185164 Morse Taper C 47 55 60 90 56.5 68 123 E 67 103 136 189 imensions in mm. A 49 56.5 80 119 33 36 57.5 F 170 0.5 231 0 401 G 8 12 14 16 H 58 66 74 88 1 LIVE CENTER WITH EXTENE INTEGRAL SHAFT AN CARIE TIP INSERT 0101851 010185136 010185146 010185156 010185166 LOA CHARTS Morse Taper C 47 55 60 90 56.5 68 123 E 67 103 136 189 imensions in mm. A 49 56.5 80 119 33 36 57.5 F 170 0.5 231 0 401 G 8 12 15 18 d 1 6 10 12 14 H 58 66 74 88 1 FEATURES It is used in special cases for turning parts without centers or with rough centers. The extended integral shaft ensures extremely small runout error on the workpiece and its slender point makes it ideal for machining thin workpieces, even when close to the live center. This live center is therefore ideal for precision machining of small sized components. Q [kg.] 64 80 100 1 160 0 0 3 400 500 640 800 1000 10 1600 00 00 30 4100 50 37 RAIAL LOA in (WORKPIECE WEIGHT) 52 75 110 160 2 3 480 700 1000 1450 00 00 4400 6400 9500 n [r.p.m.] Values referred to a live center life of about 00 operating hours Pa [kg.] 160 0 0 3 400 500 640 800 1000 10 1600 00 00 4000 50 6600 80 10400 100 37 52 75 AXIAL LOA in 110 160 2 3 480 700 1000 1450 00 00 4400 6400 9500 n [r.p.m.] Values referred to a live center life of about 00 operating hours Notes: The load values refer to the model with an integral shaft and a live center life of about 00 operating hours. Tests have shown that the live center can however be used for a longer or shorter period, depending on the types of machining task it undertakes. For other types of live center (with interchangeable center and extended integral shaft) the load values indicated on the graphs should be reduced. Example: Permitted maximum loads for the live center with integral shaft at n = 1000 r.p.m. Radial load Q = 450 kg Axial load Pa = 900 kg 9
LIVE CENTERS FOR TURNING INTERCHANGEALE CENTERS FOR FR LIVE CENTERS WITH AXIAL LOA ISTRIUTION 80-85 SERIES FR 94 d d1 0315103 0315103 03154 03155 0315406 For live center with taper 34 43 imensions in mm. L1 22.5 27 L 40 d 13.5 13.5 15.4.3 d1 13 13 15 15 23 L L1 FR 95 d 0316002 0316103 03164 03165 0316406 For live center with taper 34 39 imensions in mm. L1 32.5 35 39.5 47 L 40 d 13.5 13.5 15.4.3 L L1 FR 96 d d1 0317103 0317103 03174 03175 0317406 For live center with taper 34 43 imensions in mm. L1 33.5 36 L 40 d 13.5 13.5 15.4.3 d1 5 5 6 7 13 L L1 FR 97 Ø 7 d d1 0318103 0318103 03184 03105 For live center with taper imensions in mm. L1 39.5 39.5 42 46 L d 13.5 13.5 15.4.3 d1 7 7 7 7 L L1 FR 97 Ø 15 d d1 0318113 0318113 03184 03115 For live center with taper imensions in mm. L1 39.5 39.5 42 46 L d 13.5 13.5 15.4.3 d1 15 15 15 15 L L1 10
LIVE CENTERS FOR TURNING INTERCHANGEALE CENTERS FOR FR LIVE CENTERS WITH AXIAL LOA ISTRIUTION 80-85 SERIES FR 97 Ø 13 0318406 For live center with taper 34 imensions in mm. L1 61 L 40 d d1 13 d d1 L L1 FR 97 Ø 0318416 For live center with taper 34 imensions in mm. L1 61 L 40 d d1 d d1 L L1 FR 98 d d1 0319103 0319103 03194 03195 0319406 For live center with taper 53 53 53 53 73 imensions in mm. L1 32.3 32.3 32.3 32.3 35 L 40 d 13.5 13.5 15.4.3 d1 42 L L1 FR 98-A d d1 0319113 0319113 03194 0319315 0319416 For live center with taper 103 imensions in mm. L1 36.6 36.6 36.6 36.6 36.6 L 40 d 13.5 13.5 15.4.3 d1 50 50 50 50 70 L L1 FR 99 d d1 03103 03103 034 035 03406 For live center with taper 27 34 48 imensions in mm. L1 32 40 46 L 40 d 13.5 13.5 15.4.3 d1 22 22 40 L L1 11
LIVE CENTERS FOR TURNING FR HEA CARRYING LIVE CENTER FOR PIPE TURNING WITH AXIAL LOA ITRIUTION AN AJUSTALE RAIAL TAPER ROLLER EARING WITH SUPPORT AN EXTRACTION NUT. LURICATE WITH SPECIAL MAINTENANCE FREE GREASE. 80 SERIES 1 A H E C F 010180147 010180157 010180167 Morse Taper C 42 42 42.5 68 123 E 103 136 189 imensions in mm. A 80 119 35 35 35 F 3 0.5 354 H 74 88 1 FR HEA CARRYING LIVE CENTER FOR PIPE TURNING WITH AXIAL LOA ITRIUTION AN AJUSTALE RAIAL CYLINRICAL ROLLER EARING WITH SUPPORT AN EXTRACTION NUT. LURICATE WITH SPECIAL MAINTENANCE FREE GREASE. 85 SERIES 1 A H E C F 010185147 010185157 010185167 Morse Taper C 42 42 42.5 68 123 E 103 136 189 imensions in mm. A 80 119 35 35 35 F 3 0.5 354 H 74 88 1 12
FACE RIVER FOR TURNING HEAS FOR TURNING AN GRINING OF PIPES Can be fitted to: FR head carrying live centers with axial load distribution and FR head carrying live centers for grinding. 1 C A FOR LIVE CENTERS ---MT7-M80-M100 0404005 0404006 0404007 0404008 0404009 040400270 040400271 040400272 040400273 A 55 55 55 55 55 55 55 55 55 imensions in mm. C 35 45 35 95 35 145 35 195 35 5 35 5 35 345 35 395 35 445 98 148 198 8 8 348 398 448 498 13
FACE RIVER FOR TURNING TECHNICAL FEATURES OF FR FACE RIVERS FOR CENTERE SHAFTS FR face drivers work by a patented compensating system, operated by wedge lever, which allows four-pin driving. This system is highly adjustable and ensures safe and reliable torque transmission under the most difficult conditions; such as rough surfaces or irregular end faces with variation by as much as 3 mm. The center is independent of the driving pins and rests against a belleville spring washer assembly located inside the morse taper. Even with varying center sizes, work positioning is maintained with optimal repeatability. The center point can be easily extracted without removing the face driver from the machine tool. The interchangeability of centers with slots enables turning even of workpieces with holes in the end piece. The superior driving efficiency of FR face drivers allows the users to exploit the full performances of the state of the art machine tools. 10 11 5 1 4 12 8 7 6 9 All FR face drivers use a wedge lever compensating system. The driver consists of these components: 3 2 1) Wedge lever assembly 2) Wedge lever support pin 3) Support pin base 4) alancing plates 5) Anchor 6) riving pins 7) riving pins face plate 8) riving pins retaining screw 9) Center point 10) elleville spring washer assembly 11) Center point support cylinder 12) Face driver body HOW THE WEGE LEVER SYSTEM WORKS The wedge lever ➀ is held in position by two support pins ➁ that are themselves supported by two auxiliary supports ➂. These reduce pin deflection.the wedge lever assembly has two balancing plates ➃ that are held in position by two elastic elements called anchors ➄. These are fixed to the bottom of the balancing plates. The four driving pins ➅ are guided by the driving pin support face plate ➆. The driving pins rest their rounded end on the wedge lever s balancing plates. The wedge lever has been specially designed to compensate the obliqueness of end faces on which the driving pins rest. They are made from specially vanadium steel and higly tensile, hardened molybdenum. The driving pins are of two types, depending on the working rotation direction of the spindle. The center ➈ is independent of the driving pins and is loaded by the belleville springs. To machine workpieces with holes or large centres, point with slots can be fitted. For operating instuctions, see pag. 15. Reduced edge driving pins can be fitted to all models in order to machine from the face driver side diameters that are too small to be turned by standard size driving pins. View on spindle FR FACE RIVER TYPE SPECIAL Enables the operator to change the driving pins and the center point without having to remove other face driver components. It also enables long execution machining by even large tools. counterclockwise clockwise 14
FACE RIVER FOR TURNING INSTRUCTIONS FOR A CORRECT MAINTENANCE OF THE FACE RIVER FUNCTIONAL FEATURES A) Insert driving pins by hand a and make them slide in direction of the face driver's axis, keeping the milled plane turned outwards. ) The four driving pin rotation limiting screws b have been set by the factory. The setting allows free linear movement and a minimal rotation of the driving pins around their own axis. C) Every 400 working hours we suggest removing the central point c and the driving pins to regrease them in order to create a thin film that avoids introductions of coolant into the body of the face driver. Note: All above mentioned operations can be made with the face driver assembled on the machine without compromising its accuracy. The belleville spring washers d are preloaded and set by the factory by means of a screw e and do not require adjustment. Warning: efore any operation, be sure the machine is in a safe condition. e b a d c USING THE CENTER POINTS WITH SLOTS IN FACE RIVERS OPERATE Y SPRINGS USING: When using the center points with slots, always check overall driving pin lenght. This must never be less than 3 mm of the lenght indicated in the catalogue. When sharpening, driving pins can be shortened down to 3 mm of their original overall lenght. Note: If the normal center points are used, the driving pins can be shortened down to 6 mm. 15
FACE RIVER FOR TURNING CLAMPING FACE RIVERS WITH INTEGRAL FLANGE ON SELF-CENTERING CHUCK SOFT JAWS: * Preliminary operation to take up the axial and radial slack of the self-centering chuck. 1 st operation: machine the diameter after clamping a round flange of suitable diameter in the three jaws. 2 nd operation: Machine the diameter C after clamping the appropriate ring in the diameter. A 5 10 SOFT JAWS E ØC Ø X 0.01 X 0.01 X SELF-CENTERING CHUCK Face river 6/, 5/, 12/50, 15/55, /60 /70 45/1 A 16 16 22 56 108 ØC 109 109 153 Ø 160 160 0 ØE 32 32 32 16
FACE RIVER FOR TURNING FR FACE RIVER AAPTORS GROUN AN HARENE 56 66 Ø11 Nr.4F Ø82.563 ASA 5 16 Ø50 Ø17x19 Ø94 Ø104.8 Ø109 Ø1 Ø7 Ø133.4 Ø106.375 ASA 6 Ø72 Ø94 Ø109 +0.07 +0.04 Ø131 Ø153 +0.07 +0.04 Ø170 Ø195 +0.07 +0.04 Ø7 Ø171.4 Ø139.719 ASA 8 Ø72 Ø94 Ø109 +0.07 +0.04 Ø131 Ø16.5 6 8 38 M8 Nr.4F 60 Ø277 Ø235 Ø196.869 ASA 11 Ø170 Ø195 +0.07 +0.04 Ø223 Ø5 +0.07 +0.04 Ø170 Ø131 Ø94 Ø72 Ø109 +0.03 +0.01 Ø153 +0.07 +0.04 Ø72 Ø153 +0.03 +0.01 Ø195 +0.03 +0.01 Ø170 Ø195 +0.07 +0.04 ASA 5 flange COE 070700558 ASA 6 flange COE 070700551 ASA 8 flange COE 070700552 Note: All flanges are hardened and ground ASA 11 flange COE 070700559 Neutral flange COE 070700550 FOR FURTHER AN MORE ETAILE INFORMATION, CONTACT OUR TECHNICAL OFFICE 17
18
FACE RIVER 6/ SPECIAL FOR TURNING FACE RIVER FOR TURNING WITH INTEGRAL FLANGE FEATURES: Ø32 Ø109 Ø94 Ø63 146 Ø40 8.5 This face driver is suitable for machining shafts of between 6 and millimetres in diameter. Machining with large tools can also be carried out from the face driver side; the center point and the driving pins can be replaced without having to remove other face driver components. Ø14.2 Ø FLANGE 92 Ø8.5 N 4 holes 90 Ø13.5 16 72.5 41 View on spindle counterclockwise rotation 070760049 MORSE TAPER FITTING counterclockwise rotat. 070752381 0707523 070752385 070752387 clockwise rotation 070760048 clockwise rotat. 070752380 070752382 070752384 070752386 Taper SPARE PARTS riving pins for 6/ special Ø5 090901007 090901008 090901009 090901010 090901011 090901012 Rotat. Counterclockwise 7 8 9 10 11 12 1.4 1.9 2.4 2.9 3.4 3.9 090900007 090900008 090900009 090900010 090900011 090900012 Rotat. Clockwise 7 8 9 10 11 12 1.4 1.9 2.4 2.9 3.4 3.9 Ø5 Counterclockwise rotation Ø5 Clockwise rotation Ø Ø5 counterclockwise rotation 080845004 clockwise rotation 080845001 Counterclockwise rotation Clockwise rotation Reduced edge driving pins for 6/ special Reduced edge driving pins enable machining from the face driver side of diameters that are too small to be turned by standard size driving pins assembled on the face driver. Center point supporting driving pins for 6/ special 37 07027 19
FACE RIVER 15/55 SPECIAL FOR TURNING FACE RIVER FOR TURNING WITH INTEGRAL FLANGE FEATURES: Ø109 Ø94 Ø8.5 N 4 holes 9 Ø13.5 72 Ø63 Ø40 This face driver is suitable for machining shafts of between 15 and 55 millimetres in diameter. Machining with large tools can also be carried out from the face driver side; the center point and the driving pins can be replaced without having to remove other face driver components. Ø32 Ø8.5 Ø31.3 FLANGE counterclockwise rotation 0707507 clockwise rotation 0707506 92 72 13.5 9.8 MORSE TAPER FITTING 16 115.5 View on spindle counterclockwise rotat. 070752391 070752393 070752395 070752397 clockwise rotat. 070752390 070752392 070752394 070752396 Taper SPARE PARTS riving pins for 15/55 special 69 69 Ø10.33 Ø10.33 counterclockwise rotation 080809002 clockwise rotation 080809003 Counterclockwise rotation Clockwise rotation Reduced edge driving pins for 15/55 special Reduced edge driving pins enable machining from the face driver side of diameters that are too small to be turned by standard size driving pins assembled on the face driver. 7 090909011 090909012 090909013 090909014 090909015 090909016 090909017 090909018 090909019 0909090 0909090 090909022 090909023 0909090 0909090 Rotat. Counterclockwise 14 15 16 17 18 19 22 23 27 1.6 2.1 2.6 3.1 3.6 4.1 4.6 5.1 5.6 6.1 6.6 7.1 7.6 8.1 8.6 090909111 090909112 090909113 090909114 090909115 090909116 090909117 090909118 090909119 0909091 0909091 090909122 090909123 0909091 0909091 Rotat. Clockwise 14 15 16 17 18 19 22 23 27 1.6 2.1 2.6 3.1 3.6 4.1 4.6 5.1 5.6 6.1 6.6 7.1 7.6 8.1 8.6 Center point for 15/55 special Center points with slots for 15/55 special (for large centers or holes) Ø4.5 Ø6 Ø8.5 0702766 112 Ø4.5 Ø6 Ø8.5 4 Ø 97 10 centre points with slots 171711015 171711016 171711017 171711019 1717110 171711022 imensions points with slots 5 8 11 14 17 Ø 12 15 18 27 For centers or F holes from Ø 7.5 10.5 13.5 16.5 19.5 22.5 For operating instructions, see page 15. to Ø 10.5 13.5 16.5 19.5 22.5.5
FACE RIVER /70 SPECIAL FOR TURNING FACE RIVER FOR TURNING WITH INTEGRAL FLANGE FEATURES: Ø32 Ø109 Ø94 Ø8.5 Ø13.5 Ø69 Ø74 Ø48 Ø11 Ø42.3 This face driver is suitable for machining shafts of between and 70 millimetres in diameter. Machining with large tools can also be carried out from the face driver side; the center point and the driving pins can be replaced without having to remove other face driver components. FLANGE 96 16 12.5 counterclockwise rotation 0707600 MORSE TAPER FITTING clockwise rotation 0707600 16 74 View on spindle counterclockwise rotat. 070752366 070752368 070752370 clockwise rotat. 070752365 070752367 070752369 Taper SPARE PARTS riving pins for /70 special 70 70 Ø14.33 Ø14.33 counterclockwise rotation 080809004 clockwise rotation 080809005 Counterclockwise rotation Clockwise rotation Reduced edge driving pins for /70 special Reduced edge driving pins enable machining from the face driver side of diameters that are too small to be turned by standard size driving pins assembled on the face driver. 70 7 0909099 0909092 0909092 090909222 090909223 0909092 0909092 0909092 090909227 0909092 0909092 0909092 090909231 090909232 090909233 090909234 090909235 090909236 Rotat. Counterclockwise 19 22 23 27 31 32 33 34 35 36 2.7 3.2 3.7 4.2 4.7 5.2 5.7 6.2 6.7 7.2 7.7 8.2 8.7 9.2 9.7 10.2 10.7 11.2 090909319 0909093 0909093 090909322 090909323 0909093 0909093 0909093 090909327 0909093 0909093 0909093 090909331 090909332 090909333 090909334 090909335 090909336 Rotat. Clockwise 19 22 23 27 31 32 33 34 35 36 2.7 3.2 3.7 4.2 4.7 5.2 5.7 6.2 6.7 7.2 7.7 8.2 8.7 9.2 9.7 10.2 10.7 11.2 Center point for /70 special Center points with slots for /70 special (for large centers or holes) 0702756 117 Ø11 101 10 Ø11 4 Ø centre points with slots 1717110 1717111 1717112 1717113 1717114 1717115 1717116 1717117 imensions points with slots 8 11 14 17 23 Ø 15 18 27 33 36 For centers or F holes from Ø 10.5 13.5 16.5 19.5 22.5.5.5 31.5 For operating instructions, see page 15. to Ø 13.5 16.5 19.5 22.5.5.5 31.5 34.5
FACE RIVER 45/1 SPECIAL FOR TURNING FACE RIVER FOR TURNING WITH INTEGRAL FLANGE Ø32 Ø131 Ø90 Ø109 Ø116 Ø80 Ø Ø75.3 FEATURES: This face driver is suitable for machining shafts of between 45 and 1 millimetres in diameter. Machining with large tools can also be carried out from the face driver side; the center point and the driving pins can be replaced without having to remove other face driver components. FLANGE 108 Ø153 Ø11 22 Ø17 76.5 32 19 13.5 View on spindle counterclockwise rotation 070760032 MORSE TAPER FITTING counterclockwise rotat. 070750755 070751065 clockwise rotation 070760034 clockwise rotat. 070750756 070751066 Taper riving pins for 45/1 special 92 SPARE PARTS 92 Ø.33 Ø.33 counterclockwise rotation 080845014 clockwise rotation 080845015 Counterclockwise rotation Clockwise rotation Reduced edge driving pins for 45/1 special Reduced edge driving pins enable machining from the face driver side of diameters that are too small to be turned by standard size driving pins assembled on the face driver. 85 7 0909454 0909455 0909456 0909457 0909458 0909459 0909450 0909451 0909452 0909453 0909454 0909455 0909456 0909457 0909458 0909459 0909450 0909451 0909452 0909453 0909454 0909455 Rotat. Counterclockwise 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 63 64 65 4.8 5.3 5.8 6.3 6.8 7.3 7.8 8.3 8.8 9.3 9.8 10.3 10.8 11.3 11.8 12.3 12.8 13.3 13.8 14.3 14.8 15.3 090945344 090945345 090945346 090945347 090945348 090945349 090945350 090945351 090945352 090945353 090945354 090945355 090945356 090945357 090945358 090945359 090945360 090945361 0909453 090945363 090945364 090945365 Rotat. Clockwise 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 63 64 65 4.8 5.3 5.8 6.3 6.8 7.3 7.8 8.3 8.8 9.3 9.8 10.3 10.8 11.3 11.8 12.3 12.8 13.3 13.8 14.3 14.8 15.3 Center point for 45/1 special Center points with slots for 45/1 special (for large centers or holes) 0702758 156.5 Ø Ø 4 135 10 Ø centre points with slots 17171 17171 1717122 1717123 17171 17171 17171 1717127 17171 17171 17171 imensions points with slots 14 17 23 32 35 38 41 44 Ø 27 33 36 39 42 45 48 51 For centers or F holes from Ø 16.5 19.5 22.5.5.5 31.5 34.5 37.5 40.5 43.5 46.5 to Ø 19.5 22.5.5.5 31.5 34.5 37.5 40.5 43.5 46.5 49.5 For operating instructions, see page 15. 22
FACE RIVER 100/2 SPECIAL FOR TURNING FACE RIVER FOR TURNING WITH INTEGRAL FLANGE Ø55 Ø195 Ø170 Ø157 Ø117 Ø Ø112.3 FEATURES: This face driver is suitable for machining shafts of between 100 and 2 millimetres in diameter. Machining with large tools can also be carried out from the face driver side; the center point and the driving pins can be replaced without having to remove other face driver components. FLANGE 100 Ø13 Ø19 138.2 35 35 22.8 43 View on spindle counterclockwise rotation 070760008 MORSE TAPER FITTING counterclockwise rotat. 0707519 clockwise rotation 070760017 clockwise rotat. 0707510 Taper riving pins for 100/2 special 110 SPARE PARTS 110 Ø.33 Ø.33 counterclockwise rotation 0808102 clockwise rotation 0808103 Counterclockwise rotation Clockwise rotation Reduced edge driving pins for 100/2 special Reduced edge driving pins enable machining from the face driver side of diameters that are too small to be turned by standard size driving pins assembled on the face driver. 103 7 090900084 090900089 090900094 090900099 Rotat. Counterclockwise 84 89 94 99 6.2 8.7 11.2 13.7 090901084 090901089 090901094 090901099 Rotat. Clockwise 84 89 94 99 6.2 8.7 11.2 13.7 Center point for 100/2 special Center points with slots for 100/2 special (for large centers or holes) 0702739 192 Ø Ø 12 170 4 Ø centre points with slots 171714001 171714002 171714003 171714004 171714005 171714006 171714007 171714008 171714009 171714010 171714011 171714012 171714013 171714014 171714015 171714016 171714017 171714018 imensions points with slots 17.5.5 35 39.5 44 48.5 53 57.5 66.5 71 75.5 80 84.5 89 93.5 Ø.5 35 39.5 44 48.5 53 57.5 66.5 71 75.5 80 84.5 89 93.5 98 102.5 For centers or F holes from Ø 19.5.5 33 37.5 42 46.5 51 55.5 60 64.5 69 73.5 78 82.5 87 91.5 96 For operating instructions, see page 15. to Ø.5 33 37.5 42 46.5 51 55.5 60 64.5 69 73.5 78 82.5 87 91.5 96 100.5 23
FACE RIVER 15/55 SPECIAL FOR TURNING FACE RIVER FOR TURNING, FLANGE, WITH WORK POSITIONING REFERRE TO THE CENTRE OF THE WORKPIECE, OPERATE Y HYRAULIC CYLINER 31 CH.27 Ø94 Ø32 Ø8.5 n 4 holes Ø13.5 Ø63 Ø40 19.5 corsa max artigli min.1 max..5 Ø18 Ø31.3 FEATURES: This face driver with interchangeable fixed centre point hydraulically operated, is suitable for machining shafts of between 15 and 55 mm. in diameter. ecause of the high manufacturing standard this face driver can handle workpiece concentricity errors in turning otherwise achieved with a pregrinding operation. FLANGE Ø109 19.5 counterclockwise rotation 0707511 clockwise rotation 0707510 22 min.1 18.5 max..5 16 68 133.5 View on spindle riving pins for 15/55 special 69 SPARE PARTS 69 Ø10.33 Ø10.33 counterclockwise rotation 080809002 clockwise rotation 080809003 Counterclockwise rotation Clockwise rotation Reduced edge driving pins for 15/55 special Reduced edge driving pins enable machining from the face driver side of diameters that are too small to be turned by standard size driving pins assembled on the face driver. 7 090909011 090909012 090909013 090909014 090909015 090909016 090909017 090909018 090909019 0909090 0909090 090909022 090909023 0909090 0909090 Rotat. Counterclockwise 14 15 16 17 18 19 22 23 27 1.6 2.1 2.6 3.1 3.6 4.1 4.6 5.1 5.6 6.1 6.6 7.1 7.6 8.1 8.6 090909111 090909112 090909113 090909114 090909115 090909116 090909117 090909118 090909119 0909091 0909091 090909122 090909123 0909091 0909091 Rotat. Clockwise 14 15 16 17 18 19 22 23 27 1.6 2.1 2.6 3.1 3.6 4.1 4.6 5.1 5.6 6.1 6.6 7.1 7.6 8.1 8.6 FIXE Center point for 15/55 special Center point with slots for 15/55 special (for large centers or holes) Ø8.5 Ø18 Ø8.5 Ø centre points with slots 171711018 1717110 imensions points with slots 12 18 Ø For centers or F holes from Ø to Ø 15 23 37 4 19.5 37 4 14.5 0702769
FACE RIVER /70 SPECIAL FOR TURNING FACE RIVER FOR TURNING, FLANGE, WITH WORK POSITIONING REFERRE TO THE CENTRE OF THE WORKPIECE, OPERATE Y HYRAULIC CYLINER 31 CH27 57.5 22 max..5 15 min.1 Ø109 Ø94 Ø8.5 n 4holes 16 Ø13.5 73.5 139.5 Ø74 Ø48 corsa artigli 19.5 Ø22 Ø42.3 min.5 max..5 FEATURES: This face driver with interchangeable fixed centre point hydraulically operated, is suitable for machining shafts of between and 70 millimetres in diameter. ecause of the high manufacturing standard this face driver can handle workpiece concentricity errors in turning otherwise achieved with a pre-grinding operation. FLANGE counterclockwise rotation 070760043 clockwise rotation 070760042 9 View on spindle riving pins for /70 special 70 SPARE PARTS 70 Ø14.33 Ø14.33 counterclockwise rotation 080809004 clockwise rotation 080809005 Counterclockwise rotation Clockwise rotation Reduced edge driving pins for /70 special Reduced edge driving pins enable machining from the face driver side of diameters that are too small to be turned by standard size driving pins assembled on the face driver. 70 7 0909099 0909092 0909092 090909222 090909223 0909092 0909092 0909092 090909227 0909092 0909092 0909092 090909231 090909232 090909233 090909234 090909235 090909236 Rotat. Counterclockwise 19 22 23 27 31 32 33 34 35 36 2.7 3.2 3.7 4.2 4.7 5.2 5.7 6.2 6.7 7.2 7.7 8.2 8.7 9.2 9.7 10.2 10.7 11.2 090909319 0909093 0909093 090909322 090909323 0909093 0909093 0909093 090909327 0909093 0909093 0909093 090909331 090909332 090909333 090909334 090909335 090909336 Rotat. Clockwise 19 22 23 27 31 32 33 34 35 36 2.7 3.2 3.7 4.2 4.7 5.2 5.7 6.2 6.7 7.2 7.7 8.2 8.7 9.2 9.7 10.2 10.7 11.2 FIXE center point for /70 special FIXE Center point with slots for /70 special (for large centers or holes) Ø11 Ø22 Ø11 40 17.5 centre points with slots 1790114 1790116 imensions points with slots 17 23 Ø 36 For centers or F holes from Ø to Ø 19 35 Ø 40 6 6.3 0702771
FACE RIVER 45/1 SPECIAL FOR TURNING FACE RIVER FOR TURNING, FLANGE, WITH WORK POSITIONING REFERRE TO THE CENTRE OF THE WORKPIECE, OPERATE Y HYRAULIC CYLINER Ø34.6 ES.CH. Ø153 65 max. min.1 Ø131 Ø40 Ø11 n 4holes Ø17 Ø116 9 min. 19 max. corsa Ø80 artigli 32 6 Ø Ø32 Ø75 FEATURES: This face driver with interchangeable fixed centre point hydraulically operated, is suitable for machining shafts of between 45 and 1 millimetres in diameter. ecause of the high manufacturing standard this face driver can handle workpiece concentricity errors in turning otherwise achieved with a pre-grinding operation. FLANGE counterclockwise rotation 070760045 clockwise rotation 070760044 11 77 157 View on spindle riving pins for 45/1 special 81 SPARE PARTS 81 Ø.33 Ø.33 counterclockwise rotation 080845017 clockwise rotation 080845016 Counterclockwise rotation Clockwise rotation Reduced edge driving pins for 45/1 special Reduced edge driving pins enable machining from the face driver side of diameters that are too small to be turned by standard size driving pins assembled on the face driver. 74 7 090945444 090945445 090945446 090945447 090945448 090945449 090945450 090945451 090945452 090945453 090945454 090945455 090945456 090945457 090945458 090945459 090945460 090945461 0909454 090945463 090945464 090945465 Rotat. Counterclockwise 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 63 64 65 4.8 5.3 5.8 6.3 6.8 7.3 7.8 8.3 8.8 9.3 9.8 10.3 10.8 11.3 11.8 12.3 12.8 13.3 13.8 14.3 14.8 15.3 090945544 090945545 090945546 090945547 090945548 090945549 090945550 090945551 090945552 090945553 090945554 090945555 090945556 090945557 090945558 090945559 090945560 090945561 0909455 090945563 090945564 090945565 Rotat. Clockwise 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 63 64 65 4.8 5.3 5.8 6.3 6.8 7.3 7.8 8.3 8.8 9.3 9.8 10.3 10.8 11.3 11.8 12.3 12.8 13.3 13.8 14.3 14.8 15.3 FIXE center point for 45/1 special FIXE Center points with slots for 45/1 special (for large centers or holes) Ø 50 6 10.5 22 Ø Ø32 Ø 11.3 14.7 50 Ø centre points with slots 1717131 1717132 1717133 1717134 1717135 imensions points with slots 15 35 45 55 Ø 32 42 52 72 For centers or F holes from Ø to Ø 18 31 41 38 51 48 61 58 71 07104
FACE RIVER 100/2 SPECIAL FOR TURNING FACE RIVER FOR TURNING, FLANGE, WITH WORK POSITIONING REFERRE TO THE CENTRE OF THE WORKPIECE, OPERATE Y HYRAULIC CYLINER Ø195 Ø170 34.6 ES.CH. Ø50 Ø157 min.9 max.35 Ø117.5 corsa artigli Ø32 Ø112.3 FEATURES: This face driver with interchangeable fixed centre point hydraulically operated, is suitable for machining shafts of between 100 and 2 millimetres in diameter. ecause of the high manufacturing standard this face driver can handle workpiece concentricity errors in turning otherwise achieved with a pre-grinding operation. 1 min. 27 max. Ø13-n 3 holes 1 13 Ø19 104 3 35 36 View on spindle FLANGE counterclockwise rotation 070760046 clockwise rotation 070760047 riving pins for 100/2 special 100 SPARE PARTS 100 Ø.33 Ø.33 Counterclockwise rotation Clockwise rotation counterclockwise rotation 0808105 clockwise rotation 0808104 Reduced edge driving pins for 100/2 special Reduced edge driving pins enable machining from the face driver side of diameters that are too small to be turned by standard size driving pins assembled on the face driver. 090909084 090909089 090909094 090909099 Rotat. Counterclockwise 84 89 94 99 6.3 8.8 11.3 13.8 090909184 090909189 090909194 090909199 Rotat. Clockwise 84 89 94 99 6.3 8.8 11.3 13.8 100 Ø.33 Fixed center point for 100/2 special Fixed center points with slots for 100/2 special (for large centers or holes) Ø 50 36 8.3 Ø32 Ø 9 50 Ø centre points with slots 171714019 1717140 1717140 171714022 imensions points with slots 42 60 78 Ø 48 65 101 For centers or F holes from Ø to Ø 47 39 64 57 82 75 100 0702765 27
FACE RIVER 180/0 SPECIAL FOR TURNING FACE RIVER FOR TURNING, FLANGE, WITH WORK POSITIONING REFERRE TO THE CENTRE OF THE WORKPIECE, OPERATE Y HYRAULIC CYLINER CH46 Ø5 Ø223 Ø65 13 Ø7 Ø160.5 corsa artigli Ø35 Ø152.3 FEATURES: This face driver with interchangeable fixed centre point hydraulically operated, is suitable for machining shafts of between 180 and 0 millimetres in diameter. ecause of the high manufacturing standard this face driver can handle workpiece concentricity errors in turning otherwise achieved with a pre-grinding operation. 38 min.1 max.27.5 Ø13 n 4 holes 35 Ø19 17.5 46.5 49 2.5 133 2 View on spindle FLANGE counterclockwise rotation 070760050 clockwise rotation 070760051 riving pins for 180/0 special 110 SPARE PARTS 110 Ø.33 Ø.33 counterclockwise rotation 0808102 clockwise rotation 0808103 Counterclockwise rotation Clockwise rotation Reduced edge driving pins for 180/0 special Reduced edge driving pins enable machining from the face driver side of diameters that are too small to be turned by standard size driving pins assembled on the face driver. 090900084 090900089 090900094 090900099 Rotat. Counterclockwise 1 1 134 139 6.2 8.7 11.2 13.7 090901084 090901089 090901094 090901099 Rotat. Clockwise 1 1 134 139 6.2 8.7 11.2 13.7 110 Ø.33 Fixed center point for 180/0 special Fixed center point with slots for 180/0 special (for large centers or holes) Ø68 Ø35 M6 58 Available on request Ø35 1.7 60 17.3 2.5 0702763
FACE RIVER FOR GRINING FR face drivers and live centers for grinding application can meet roundness tolerance within 1.5 micron and eccentricity tolerance within 2.5 micron to drive non hardened shafts and hardened shafts up to HRC 63. For load parameters see under mentionend instructions. Example: for shafts in the diameter range from 5 mm to 9 mm, a 90 Kg axial thrust from live centre s side is enough. The face driver has an integrated balance-type self-compensating system (this is FR patented system, which is also used on face drivers for shaft turning). This system enables highly sensitive self-compensation of the driving pins. As a result the face driver has considerable drive and concentricity capability on the shaft. INSTRUCTIONS FOR SELECTING AXIAL LOA PARAMETERS ON FACE RIVERS AN LIVE CENTRES FROM Ø 5 10 16 31 51 101 FOR SHAFTS TO Ø 9 15 50 100 0 AXIAL THRUST On driving pins On live center KG KG 50 80 70 110 60 100 90 150 70 150 100 2 100 0 150 0 150 0 2 370 0 350 0 800 NOTE: The above values are purely a guide-line and may vary according to grinding wheel contact area and type of material being machined. Thrust check To check the thrust you need a load cell (see our web site) or a dynamometer; if you don t have any of these measuring instruments, you can obtain thrust values in kg by multiplying the area of the pneumatic or hydraulic cylinder by the pressure of the cylinder in bar or atmospheres with the following formula: Formula: r 2 x 3.14 x p = T. r: radius (in cm) p: pressure (in bar o atm) T: thrust (kg) RIVING PIN FACE PLATE CENTERING SHAFT Instructions for centering the driving pins face plate The centering shaft is used to center the face driver s centre point within 2 thousandths, putting the centering shaft between face driver and live centre in the same axial load conditions as those of the piece to be machined. You then use an Allen wrench to turn the eight dowels around the driving pin face plate, while watching the micrometer-comparator positioned on the face driver side of the centering shaft. Ø17 Ø19 Ø17 100 COE 01001
FACE RIVER FOR GRINING Ø 7/ OPERATE Y PNEUMATIC OR HYRAULIC CYLINER min.4.3 max..5 Ø Ø109 Ø94 Ø8.5 n 4holes 9 16 Ø13.5 Ø63 Ø35 min.ø7 max.ø14 FLANGE 0709072 MORSE TAPER FITTING 0709048 07098 0709248 Taper CH.15 Ø17.8 Ø19.6 17 92 72.5 131.5 SPARE PARTS View on spindle riving pins for driving shafts from Ø7 to Ø 0809001 Ø5 37 Reduced edge driving pins with hard metal added for driving shafts from Ø7 to Ø, lowered to permit the wheel to get out on face driver side Ø5 0919007 0919008 0919009 0919010 0919012 7 8 9 10 12 1.5 2 2.5 3 4 37 Ø5 37 riving pins face plate for shafts from Ø7 to Ø 65 07101 Ø63 Ø54 Ø35 22 17
FACE RIVER FOR GRINING Ø 12/70 OPERATE Y PNEUMATIC OR HYRAULIC CYLINER min.1 max..5 Ø109 Ø94 Ø8.5 n 4 holes 9 16 Ø13.5 72 Ø63 Ø35 max..3 min.0.8 min.ø12 max..3 FLANGE 0709066 MORSE TAPER FITTING 0709042 07092 0709242 Taper Ø15 Ø17.8 CH.15 Ø 17 92 135 View on spindle riving pins with added hard metal for driving shafts from Ø12 to Ø70 SPARE PARTS Ø10.33 0809003 69 Reduced edge driving pins with hard metal added for driving shafts from Ø12 to Ø70, lowered to permit the wheel to get out on face driver side 69 Ø10.33 7 0919112 0919114 0919116 0919118 09191 0919122 09191 09191 12 14 16 18 22 2. 3. 4. 5. 6. 7. 8. 9. Central point for shafts from Ø12 to Ø70 with centres from Ø2 to Ø14 Central point with slots for shafts from Ø17 to Ø70 with centres or holes from Ø14 to Ø23 Ø10 Ø15 Ø10 Ø12 Ø 37 17 37 14.5 07102 1790101 31
FACE RIVER FOR GRINING Ø /100 OPERATE Y PNEUMATIC OR HYRAULIC CYLINER min.1 max..5 96 Ø109 Ø94 Ø 8.5 n 4holes Ø13.5 134.3 Ø74 Ø48 min.5 max..5 Ø15 Ømin19 Ømax42.3 FLANGE 0709090 MORSE TAPER FITTING 0709082 0709282 0709282 Taper Ø17.8 CH.15 Ø 16 73.8 19.5 View on spindle riving pins with added hard metal for driving shafts from Ø to Ø100 SPARE PARTS Ø14.33 0809004 70 Reduced edge driving pins with hard metal added for driving shafts from Ø to Ø100, lowered to permit the wheel to get out on face driver side 70 Ø14.33 7 09199 0919222 09192 09192 09192 0919232 0919236 19 22 32 36 2.70 4. 5. 6. 7. 9. 11. FIXE Center point with slots (for large centers or holes) Central point with slots for shafts from Ø17 to Ø70 with centres or holes from Ø14 to Ø23 Ø11 Ø11 Ø Ø11 Ø15 Ø6 Ø 6.5 40 19.5 12 40 18.5 6.3 40 17.5 07103 1790112 centre points with slots 1790114 1790116 imensions points with slots 17 23 Ø 36 For centers or F holes from Ø to Ø 19 35 32
FACE RIVER FOR GRINING Ø 45/150 OPERATE Y PNEUMATIC OR HYRAULIC CYLINER 11 FLANGE Ø34.6 CH. Ø153 Ø131 Ø40 Ø11 n 4holes Ø17 Ø116 Ø80 min.9 max. Ø Ømin 44 Ømax 75 0709098 MORSE TAPER FITTING 0709094 07094 Taper min1 max 65max 32 77 157 View on spindle riving pins with added hard metal for driving shafts from Ø45 to Ø150 SPARE PARTS Ø.33 0809005 81 Reduced edge driving pins with hard metal added for driving shafts from Ø45 to Ø150, lowered, to permit the wheel to get out on face driver side Ø.33 0919344 0919350 0919355 0919360 0919365 44 50 55 60 65 4.8 7.8 10.3 12.8 15.3 81 Central point for shafts from Ø45 to Ø150 with centers from Ø3 to Ø22 Central point with slots for shafts from Ø45 to Ø150 with centers Ø 10.5 Ø 11.3 14.7 Ø Ø32 Ø 50 6 22 50 07104 centre points with slots 1717131 1717132 1717133 1717134 1717135 imensions points with slots 15 35 45 55 Ø 32 42 52 72 For centers or F holes from Ø to Ø 18 31 41 38 51 48 61 58 71 33
LIVE CENTER FOR GRINING MORSE TAPER 3 COE 0109101 HAR METAL Ø6 Ø8 MORSE TAPER 3 Max axial load 700 Max radial load (Workpiece weight) Max speed r.p.m. 5000 with tolerances: roundness <.0015 eccentricity <.00 Ø61 Ø51.7 17.3 15 5 100.5 81.7 182.2 COE 0109201 HAR METAL Ø14 Ø16 MORSE TAPER 3 Max axial load 700 Max radial load (Workpiece weight) 60 Max speed r.p.m. 5000 with tolerances: roundness <.0015 eccentricity <.00 Ø61 Ø51 31.5 10.5 15 5 100.5 81.7 182.2 COE 010923101 HAR METAL Ø MORSE TAPER 3 Max axial load 700 Max radial load (Workpiece weight) 150 Max speed r.p.m. 5000 with tolerances: roundness <.0015 eccentricity <.00 Ø61 Ø51 Ø.2 15 5 82.7 81.7 164.4 34
LIVE CENTER FOR GRINING MORSE TAPER 4 COE 0109102 HAR METAL Ø6 Ø55.5 Ø68 MORSE TAPER 4 Ø31.7 Max axial load 900 Max radial load (Workpiece weight) Max speed r.p.m. 4000 Ø8 with tolerances: roundness <.0015 eccentricity <.00.6.1 39 7 101.2 COE 0109202 HAR METAL Ø14 Ø55.5 Ø68 MORSE TAPER 4 Ø31.7 Max axial load 900 Max radial load (Workpiece weight) 60 Max speed r.p.m. 4000 Ø16 with tolerances: roundness <.0015 eccentricity <.00 31.5 17.2 39 7 101.2 COE 010923102 HAR METAL Ø Ø55.5 Ø68 MORSE TAPER 4 Ø31.7 Max axial load 900 Max radial load (Workpiece weight) 850 Max speed r.p.m. 4000 Ø35 with tolerances: roundness <.0015 eccentricity <.00 31 39 7 101.2 COE 0109102 Ø35 1.5 Ø55.5 Ø68 MORSE TAPER 4 Ø31.7 Max axial load 900 Max radial load (Workpiece weight) 850 Max speed r.p.m. 4000 with tolerances: roundness <.0015 eccentricity <.00 7 41 39 101.2 35
LIVE CENTER FOR GRINING MORSE TAPER 5 COE 0109103 Ø69.5 Ø84 MORSE TAPER 5 Ø44.399 Max axial load 10 Max radial load (Workpiece weight) 60 Max speed r.p.m. 00 Ø12 with tolerances: roundness <.0015 eccentricity <.00 HAR METAL Ø10.4 32 31 8 1 COE 0109203 Ø69.5 Ø84 MORSE TAPER 5 Ø44.399 Max axial load 10 Max radial load (Workpiece weight) 0 Max speed r.p.m. 00 Ø with tolerances: roundness <.0015 eccentricity <.00 HAR METAL Ø16 35.3 31 8 1 COE 010923103 HAR METAL Ø Ø48 Ø69.5 Ø84 MORSE TAPER 5 Ø44.399 Max axial load 10 Max radial load (Workpiece weight) 1800 Max speed r.p.m. 00 with tolerances: roundness <.0015 eccentricity <.00 8 42.4 31 1 COE 0109103 Ø69.5 Ø84 MORSE TAPER 5 Ø44.399 Max axial load 10 Max radial load (Workpiece weight) 1800 Max speed r.p.m. 00 Ø35.4 1.5 with tolerances: roundness <.0015 eccentricity <.00 8 31 1 36
LIVE CENTER FOR GRINING MORSE TAPER 6 - METRIC 80 - METRIC 100 COE 0109104 Ø141 Ø170 MORSE TAPER 6 Ø63.348 Max axial load 14700 Max radial load (Workpiece weight) 100 Max speed r.p.m. 500 Ø60 with tolerances: roundness <.00 eccentricity <.0050 2 10 54 61.5 195 COE 0109204 Ø141 Ø170 MORSE TAPER 6 Ø63.348 Max axial load 14700 Max radial load (Workpiece weight) 100 Max speed r.p.m. 500 Ø35.17 1.5 with tolerances: roundness <.00 eccentricity <.0050 2 10 43 61.5 195 M80 COE 0109106 M100 COE 0109107 Ø141 Ø170 Ø80 METRIC 80 Ø100 METRIC 100 Max axial load 14700 Max radial load (Workpiece weight) 200 Max speed r.p.m. 500 Ø80 with tolerances: roundness <.00 eccentricity <.0050 2 10 69.3 61.5 0 M80 COE 0109206 M100 COE 0109207 Ø141 Ø170 Ø80 METRIC 80 Ø100 METRIC 100 Max axial load 14700 Max radial load (Workpiece weight) 200 Max speed r.p.m. 500 Ø35.17 1.5 with tolerances: roundness <.00 eccentricity <.0050 2 10 41 61.5 0 37
NOTES 38
TECNOLOGIE FR S.r.l. VIA CÀ ELFIORE, 16 40037 orgonuovo di Sasso Marconi (ologna) Italy Tel. +39.051.84.67.60 (6 linee r.a.) - Telefax +39.051.84.53.06 SITO INTERNET: www.tecnologiefrb.com INIRIZZO E.mail: info@tecnologiefrb.com TECNOLOGIE FR WARRANTY - ISCLAIMER OF WARRANTY Tecnologie FR warrants that its products shall be free from defects in material and workmanship under normal use when correctly installed and maintained. This warranty of quality shall terminate ninety (90) days after delivery of the products to the buyer and shall not apply to products which have been subjected to accident, misure, abuse, neglect or improper storage, handling or maintenance. This statement of warranty is in lieu of all other warranties with respect to the products, express or implied, whether written or oral, statutory, by operation of law or otherwise. There is no - and Tecnologie FR disclaims any - warranty of merchantability or fitness for a particular purpose or use or warranty arising by usage of trade or performance or course of dealing. LIMITATION OF AMAGES - ISCLAIMER OF LIAILITY uyer s sole and exclusive remedy against Tecnologie FR for breach of warranty shall be limited to repair or replacement of any nonconforming products, pursuant to the above statement of warranty. Tecnologie FR shall not be liable to buyer or any other person for any special, indirect, incidental, consequential or exemplary losses, damages or expenses, directly or indirectly arising out of the sale, handling or use of the products or from any other cause relating thereto. Tecnologie FR s liability whether based on contract, warranty or tort (including but not limited to negligence and strict liability) or otherwise is limited to, at Tecnologie FR s option, the repair or replacement of nonconforming products or the repayment of, or crediting buyer with, an amount equal to the purchase price upon return of the products. uyer acknowledges that if Tecnologie FR performs under this limited remedy, such limited remedy shall not have failed its essential purpose. TECNOLOGIE FR S.r.l. shall not be legally bound by the data, design and drawings in contained in this catalogue, which is subject to modifications made on the equipment. TECNOLOGIE FR S.r.l. reserves the right to make any such modifications without prior warning. The descriptions and illustrations in this catalogue shall not be used in other publications or be reprinted or translated either in their entirety or in part without the prior written consent of TECNOLOGIE FR S.r.l. Copyright by TECNOLOGIE FR S.r.l. Printed in Italy - July 04
For further and more detailed information do not hesitate to ask for our under mentioned specific catalogues or to visit our web site www.tecnologiefrb.com Specific catalogues: CATALOGO N CATALOGUE N 1 Live centers with axial load distribution - with interchangeable center for turning shafts and pipes - with integral shaft for turning shafts - with head carrying integral shaft ead centers with extraction nut for turning shafts - with interchangeable center and extraction nut for turning shafts and pipes Interchangeable centers of various types Pipe turning heads CATALOGO N CATALOGUE N 2 rivers for pipe turning Face drivers for shaft turning Face drivers for self-compensating chucks with retractable jaws of every type and make Face drivers adaptors CATALOGO N CATALOGUE N 3 Live center, MT7, M80, M100 for turning and grinding "heavy" series Face drivers for turning of shafts and pipes with large diameters Pipe turning heads CATALOGO N CATALOGUE N 4 Face drivers for gear cutting machines with fixed driving teeth for gear cutting of shafts and pipes Live centers for gear cutting machines with interchangeable central shaft for gear cutting of shafts and pipes Live centers for gear cutting machines with head carrying central shaft Pipe gear cutting heads CATALOGO N CATALOGUE N 5 Precision face drivers for grinding of hardened and non-hardened shafts and pipes Precision live centers for grinding of shafts and pipes Pipe grinding heads CATALOGO N CATALOGUE N 6 ead centers of carbide for grinding ead centers for grinding with carbide head ead centers with extraction nut for turning and grinding Special dead centers as per your drawing CATALOGO N CATALOGUE N 7 Soft turnable jaws for chucks of every type and make Automatic centering device ench for checking eccentricity Live centers Rapido series - for wood turning lathe - with springs for automatic lathes
TECNOLOGIE FR S.r.l. MACHINE TOOLS EQUIPMENT Via Cà elfiore, 16 40037 orgonuovo di Sasso Marconi (ologna) Italy Tel. +39.051.84.67.60- Telefax +39.051.84.53.06 SITO INTERNET: www.tecnologiefrb.com INIRIZZO E.mail: info@tecnologiefrb.com