Interior Equipment,
Häfele, the brand you can trust. The innovator of functionality.
Contents Room and Frontwall Systems DIFLEX Adjusting foot for raised floors Hook-in profile Eilox SHOPTEC Shopfitting system Bracket Wall channel Column Panel fixing element Shelf frame Clothes hanger rail Pharmacy Systems Carrier frame Shop fitting system Display 150 Shop fitting system Single Shop fitting system Display 200 HV Organization drawer PHARMA-ORG Pharmacy system We reserve the right to alter specifications without notice (HTH Furniture Fittings 20). FF.2
Contents Bar Railing Systems Gallery railing system Bar railing system Bar railing systems from Hâfele The bar railing system from Häfele represents another individual solution for the project and hotel area that can also be used in the private sector. The railings are available in three different diameters and can be individually bent in accordance with requirements. The comprehensive range of accessories such as railing supports, end caps, glass holders and glass supports makes it possible to create individual designs and blend in with the respective situation in an immaculate, dimensionally accurate way. All of the connections can be either screw-fixed or glue-fixed. (Bar railing systems see page.55) We reserve the right to alter specifications without notice (HTH Furniture Fittings 20). FF.3
Information Häfele Functionality: Getting the best from your shop Interior and furniture design always swings between extremes: Simple or opulent, delicate or bulky, straight or rounded, convenient or exclusive. Häfele shows you the right way inspired by the functionality styles and decorative design ideals for all wishes and requirements. DIFLEX Adjusting foot for raised floors (Page.6) Hook-in profile EILOX (Page.7) SHOPTEC Shopfitting system (Page.8) Wall channel (Page.10) Column (Page.12) Round column, Ø60 mm Ø (Page.16) Column connector (Page.19) FF.4
Information Bar railing system (Page.55) Gallery railing system (Page.54) Gallery railing system (Page.52) PHARMA-ORG Frame systems (Page.48) HV Organization drawer (Page.47) Shop fitting system Display 200 (Page.41) Shop fitting system Display 150 (Page.33) Shop fitting system Display 150 (Page.33) Shop fitting system Single (Page.38) Shop fitting system Single (Page.38) FF.5
Room and Frontwall Systems DIFLEX Adjusting foot for raised floors Area of application: For medium load bearing areas, renovating old buildings or offices and for routing wires, cables and pipes of any kind beneath a floor surface load max. 500 kg/qm, static load, max. 300 kg/qm adjusting screw, aluminium support and foot plate, plastic support plate with burging soft plastic Finish: Adjusting screw galvanized, support and foot plate black with green support plate Version: M8 adjusting screw with SW4 hexagon socket Installation: Adjusting screw with support for knocking into timber (subconsfunction), foot plate plug fitting onto adjusting screw Advantages Efficient assembly Drilling only needed to countersink screw with pre-mounted support No dowels, screwing or preparing work required-just set in place Quick alignment Can be walked on immediately Impact sound reduction of approx. 33dB due of soft plastic support plate Installation Squared edge timber Floor DIFLEX Adjusting foot Squared edge timber Adjusting screw Prepare squared edge timber/levelling batten Knock in screw with pre-mounted support from beneath Height mm Turn squared edge timber/levelling batten and align at a distance of 500 mm Level out height of squared edge timber/ levelling batten using adjusting foot Lay and fix the floor covering Distance D mm 48 25 43 791.10.031 69 43 83 791.10.032 105 78 8 791.10.033 158 3 153 791.10.034 179 148 188 791.10.035 212 183 223 791.10.036 249 218 258 791.10.037 We reserve the right to alter specifications without notice (HTH Furniture Fittings 20). FF.6
Room and Frontwall Systems Hook-in profile EILOX for easy construction of wall claddings Area of application: For wall claddings, paintings, etc. Material: Aluminium Version: Screw holes at 96 mm intervals, For Hospa 5.0 or Varianta 6.0 Installation: For screw fixing Exact positioning by means of hook-in lips Same rail for wall and claddong component With ridge on the underside, e.g. for cable routing Building material class A1 according to DIN 4102 part 4/03.81 Fire behaviour of building materials and elements Lenght mm 2,000 783.53.002 We reserve the right to alter specifications without notice (HTH Furniture Fittings 20). Note max. 1,000 mm height distance between 2 hook-in profiles. FF.7
SHOPTEC Shopfitting system SHOPTEC is a highly flexible and universal shopfitting system. Various basic elements can be combined with each other, allowing the best possible use to be made of the available space. The garment display rails are easy to install in columns and wall channels and no tools are required. Wall channels Round columns Columns Brackets Squared edge timber Gondola head frame SHOPTEC provides you with a wide range of garment display rails and therefore individual ways of successfully displaying merchandise. Pitch length, length over engagement hooks and effective length Standard pitch length, length over engagement hooks and effective length guarantee compatibility between wall channels, columns and available components such as shelf supports or support rails. Dimensions for column 30 x 30 mm A Internal width 595/970 B Pitch length 625/1,000 C Length over engagement hooks 621/996 A B C Dimensions for column 60 x 30 mm A Internal width/effective length 595/970 B Pitch length 625/1,000 C Length over engagement hooks 621/996 A B C Dimensions for round column Ø 60 mm Ø A Internal width/effective length 565/940 B Pitch length 625/1,000 C Length over engagement hooks 621/996 A B C Safety requirements Shelf systems must comply with the technical safety requirements defined in EN 1727:1998. Among other things, this means that shelf systems must be secured to prevent tipping. The surface must be suitable or appropriately reinforced for erecting a shelf system. The storage equipment and device guidelines defined in ZH 1/428 of the employer s liability association guidelines must be complied with. We reserve the right to alter specifications without notice (HTH Furniture Fittings 20). FF.8
Bracket Area of application: Supporting shelves, for single or double slotted wall channels and columns Finish: Plastic coated white,ral 9010 Installation: Hooking into slots in the wall channel or column Information The specified load capacity only applies with evenly distributed load per bracket. Standard version Information Glass shelves can be used in combination with shelf supports and suction pads Height mm Depth D mm 62.8 166 774.60.168 216 774.60.2 266 774.60.266 316 774.60.319 366 774.60.364 416 774.60.417 We reserve the right to alter specifications without notice (HTH Furniture Fittings 20). U-Bracket for use in double slotted wall columns Finish: Plastic coated, White RAL 9010 Version: With 2 hooks, with two Ø5.2 mm drillings at bottom for screw fixing the wooden shelf, angle cannot be adjusted Ø Height mm Depth D mm 64 180 774.66.203 230 774.66.258 280 774.66.301 380 774.66.409 480 774.66.507 FF.9
Wall channel Finish: Plastic coated white, RAL 9010 U-Shape Channel Width mm Single slotted Lenght L mm 19 500 774.03.055 1,000 774.03.108 1,500 774.03.153 2,000 774.03.206 Double slotted 28 500 774.05.050 1,000 774.05.102 1,500 774.05.157 2,000 774.05.200 Single slotted Double slotted We reserve the right to alter specifications without notice (HTH Furniture Fittings 20). FF.10
Wall channel Finish: Plastic coated Interval: 50 mm Semi-circular, single slotted Colour: White aluminium, RAL 9006 Length L mm 500 770.00.205 1,100 770.00.210 1,500 770.00.215 2,000 770.00.220 Cover cap for semi-circular, single slotted wall channel Material Plastic Packing: 6 pcs. Finish White aluminium, similar RAL 9006 770.00.290 We reserve the right to alter specifications without notice (HTH Furniture Fittings 20). U-Shaped channel Single slotted Double slotted Length L mm Single slotted Packing: 1 pair White, RAL 9003 500 772.03.055 770.03.205 800 772.03.082 770.03.208 1,000 772.03.108 770.03.210 1,500 772.03.153 770.03.215 2,000 772.03.206 770.03.220 2,500 772.03.251 770.03.225 Double slotted 1,000 772.05.102 770.05.210 1,500 772.05.157 770.05.215 2,000 772.05.200 770.05.220 2,500 772.05.255 770.05.225 White aluminium, RAL 9006 FF.
Fixing material for wall channel Supplied with 20 Dowels (Ø6 x 36 mm) 20 Chipboard screws (Ø4.5 x 60 mm) 80 Self adhesive caps ever 20 in colours brown, white, black and white aluminium Ø Ø Fixing material wall channel Packing: 1 or 10 pcs. 772.03.993 Column Material thickness: 2 mm Interval: 50 mm 30 x 30 mm (W x D) Single slotted on two sides Single slotted on four sides Double slotted on two sides Length L mm White RAL 9003 Single slotted on two sides White aluminium RAL 9006 2,600 772.12.269 770.12.226 3,000 772.12.303 770.12.230 Single slotted on four side 2,600 772.14.263 770.14.226 Double slotted on two sides 2,600 772..262 770..226 3,000 772..306 770..230 We reserve the right to alter specifications without notice (HTH Furniture Fittings 20). FF.12
Cover cap for 30 x 30 mm column Material Plastic Finish White, similar RAL 9003 White aluminium, similar RAL 9006 772.91.975 770.91.297 Column fastening for 30 x 30 mm column Supplied with 1 Ceiling pin clamp screw with centering tip 1 Top tube insert with M10 threaded end cap 1 Base unit Material Finish Steel White, RAL 9003 772.25.015 White aluminium, RAL 9006 770.25.201 Packing: 1 set 60 x 30 mm (W x D) Slots: Double slotted on two sides (side slots only suitable for connecting) We reserve the right to alter specifications without notice (HTH Furniture Fittings 20). Column insert for 60 x 30 mm column Area of application: For use with ceiling clamping or adjusting screw Thread: M10 Version: Column insert for bottom with supporting surface for rear panel Length L (mm) Number of lateral slots White, RAL 9003 White aluminium, RAL 9006 1,315 2 772.16.713 770.16.213 2,5 3 772.16.721 770.16.221 2,515 4 772.16.725 770.16.225 2,915 4 772.16.729 770.16.229 Material Zinc alloy Finish Bright Version For top and bottom For bottom 770.16.292 770.16.294 FF.13
Cover cap for 60 x 30 mm column Area of application: Covering top end of column Material Plastic Finish White aluminium, similar RAL 9006 770.16.293 Column foot for 60 x 30 mm column Finish: Plastic coated Material thickness: 2 mm Material Steel Finish White aluminium, RAL 9006 770.16.295 Mounting bracket for 60 x 30 mm column Area of application: Wall mounting of 60 x 30 mm columns Version: With snap-off points for shortening length of bracket Safety lock screw set for 60 x 30 mm column Material Steel Area of application: Securing connections of mobile shelves Dimensions: M8 x 50 Version: With SW 13 square nut Material Steel Packing: 10 pcs. Finish Galvanized Finish Galvanized 770.16.296 770.16.999 We reserve the right to alter specifications without notice (HTH Furniture Fittings 20). FF.14
Column support rail for 60 x 30 mm column Finish: Plastic coated Version: Plug in, with 2 safety clips A Internal width 595/970 B Pitch length 625/1,000 C Length over engagement Order information hooks 621/996 A B C Connections with a pitch length of 1,250 mm are also available for Information fixing rear panels and wall claddings. Connections of mobile shelves (with castors) must be secured with Please order safety lock screws separately. safety look screws. Pitch length L mm White, RAL 9003 White aluminium, RAL 9006 625 772.16.790 770.16.290 1,000 772.16.791 770.16.291 We reserve the right to alter specifications without notice (HTH Furniture Fittings 20). Foot, plug in for 30 x 30 and 60 x 30 mm columns foot, plastic cover cap and foot plate Finish: Plastic coated foot Height adjusting facility: +40 mm with height adjusting screws Pitch length L mm White, RAL 9003 White aluminium, RAL 9006 350 772.16.780 770.16.280 400 772.16.781 770.16.281 625 772.16.782 770.16.282 FF.15
Round column, Ø60 mm Ø Finish: Plastic coated Material thickness: 2 mm Slots: Double slotted on four sides Interval: 50 mm Standard version Length L mm Colour 1,410 White aluminium, RAL 9006 770.10.214 2,210 770.10.222 2,610 770.10.226 Column foot for standard version Foot part for standard version, lateral mounting Material Steel Depth: 330 mm Version: With M10 thread for use with height adjusting screws or castors Installation: Screw fixing Material Steel Colour White aluminium, RAL 9006 Colour White aluminium, RAL 9006 770.10.280 770.10.281 We reserve the right to alter specifications without notice (HTH Furniture Fittings 20). FF.16
Column insert for standard version Diameter: 60 mm Thread: M10 Material Steel Colour Bright 770.10.282 Version screw fixing to foot part Version: With M10 threaded plate Supplied accessories 1 Spacer sleeve 1 Plastic washer, white (saddle washer) 1 Shim 1 M10 x 80 Hexagon bolt Length L mm Colour 1,410 White aluminium, RAL 9006 770.19.214 2,210 770.19.222 Foot part for version screw fixing to foot part Diameter: 60 mm Single-sided Dimension: M10 x 50 height adjusting screw with SW17 hexagon Thread: M10 Height adjusting facility: +40 mm with 2 height adjusting screws or castors with M10 threaded bolt Version: With 2 cover caps and 2 feet with height adjusting screw We reserve the right to alter specifications without notice (HTH Furniture Fittings 20). Double-sided Length L mm Single-sided Effective depth N mm Colour 495 400 White aluminium, RAL 9006 Double-sided 770.19.284 660 300 White aluminium, RAL 770.19.286 860 400 9006 770.19.288 FF.17
Version screw fixing to foot plate With M10 threaded insert, single-sided Length L mm Colour 1,410 White aluminium, RAL 9006 770.18.214 Foot plate for version screw fixing to foot plate Supplied accessories 1 Shim 1 M10 x 25 Hexagon bolt Information This foot plate is exclusively designed for use with round column 770.18.214 Diameter mm Colour 550 x 30 White aluminium, RAL 9006 770.18.280 Accessories for round columns, Ø60 mm Ø Column insert Upper column end piece Material Plastic Finish: Plastic coated Material Steel Colour White aluminium, RAL 9006 Colour White aluminium, RAL 9006 770.18.291 770.18.290 We reserve the right to alter specifications without notice (HTH Furniture Fittings 20). FF.18
Column connector Finish: Plastic coated Colour: White aluminium, RAL 9006 A Internal width 565/940 B Pitch length 625/1,000 C Length over engagement hooks 621/996 A B C Information For mobile connections, safety lock screws must be used Internal width A mm Pitch length B mm 565 625 770.19.206 940 1,000 770.19.210 We reserve the right to alter specifications without notice (HTH Furniture Fittings 20). Ceiling clamping screw Area of application: Clamping the round column Material: Plastic plate Finish: Plate white, similar RAL 9003 Thread: M10 x 60 mm Version: With centering tip and pivotable ceiling plate Material Steel Packing: 1 or 100 pcs. Colour Galvanized 637.01.717 FF.19
Accessories for columns Wall spacer Area of application: Wall mounting double slotted columns Finish: Plastic coated Rigid Version Rigid White, RAL 9003 White aluminium, RAL 9006 772.10.796 770.10.296 Adjustable Information The securing hole must be drilled through and Securing hole secured with a pin during installation. Length L mm White, RAL 9003 White aluminium, RAL 9006 50 75 772.10.291 770.10.291 80 5 772.10.292 770.10.292 We reserve the right to alter specifications without notice (HTH Furniture Fittings 20). FF.20
Height adjusting screw M10 With stainless steel foot plate screw, plastic glide Finish: Screw galvanized, foot plate ground, glide black Drive: Top with SW 5 hexagon socket, bottom with SW 8 square Thread length mm Packing: 1 or 25 pcs. 60 637.00.020 With steel foot plate screw and foot plate, plastic glide Finish: Screw galvanized, foot plate nickel plated, glide black Drive: SW 12 square Thread length mm 20 651.02.909 Packing: 1, 100 or 500 pcs. We reserve the right to alter specifications without notice (HTH Furniture Fittings 20). With rigid plastic foot plate screw Finish: Galvanized screw, black plate Drive: SW 17 hexagonal Thread length mm Packing: 1 or 100 pcs. 50 651.01.500 FF.21
Panel fixing element Universal clip Area of application: For attaching panels, walls etc. with thickness of 4 22 mm to double slotted columns Installation: Clipping into slots in column Installation Material Colour Flush fitted panel in front of column Rebated panel in front of column Plastic Transparent 770.10.497 Information Can only be used with rear panel hooks We reserve the right to alter specifications without notice (HTH Furniture Fittings 20). FF.22
Rear panel hook For hooking into side slots for 30 x 30, 60 x 30 and Ø60 mm column Ø Installation Finish Bright Packing: 1 or 10 pcs. 771.28.9 For hooking into double slotted 30 x 30 and 60 x 30 mm columns from the front Finish: Plastic coated Colour Installation White aluminium, RAL 9006 770.28.200 Packing: 1 or 10 pair We reserve the right to alter specifications without notice (HTH Furniture Fittings 20). For hooking into side slots of double slotted columns Installation 5.5 Finish: Plastic coated Colour White aluminium, RAL 9006 Packing: 1 or 10 pcs. 770.28.220 FF.23
Centre panel hook Installation Area of application: For hooking into side slots of single and double slotted columns Finish Bright Packing: 1 or 10 pcs. 771.28.137 Rear panel support For hooking onto column support rail for 60 x 30 mm column Area of application: Installing the panel between columns Finish: Galvanized Installation Flush fitted with non-rebated panel Mounting with spacer clip with rebated panel Information The support can only be used in combination with 60 x 30 mm columns with the associated connector Spacer clip for rear panel support Suitable for Non-rebated panel Rebated panel Depth mm Order information Also use spacer clip when installing rebated panels. Please order separately Material Plastic 13.5 770.28.940 19.5 770.28.941 Colour Black 770.28.330 We reserve the right to alter specifications without notice (HTH Furniture Fittings 20). FF.24
Double bracket for installing between columns Length: 200 400 mm Version: With 2 hooks For 30 x 30 mm Area of application: For wooden shelves Finish: Plastic coated Depth D mm Load bearing capacity 40 kg Packing: 1 or 10 pair White, RAL 9003 White aluminium, RAL 9006 200 772.78.212 770.78.220 300 772.78.310 770.78.230 Load bearing capacity 65 kg 400 772.78.418 770.78.240 For round column Ø60 mm Ø Area of application: For glass and wooden shelves Finish: Plastic coated white aluminium, RAL 9006 Version: With 2 suction pads for glass shelves We reserve the right to alter specifications without notice (HTH Furniture Fittings 20). Suction pads for brackets Depth D mm Packing: 1 or 100 pcs. Area of application: Placing glass shelves onto brackets, double brackets and shelf supports Packing: 20 or 100 pcs. 200 770.77.220 300 770.77.230 400 770.77.240 Material Plastic Colour Transparent 772.22.005 FF.25
Shelf frame Area of application: Inserting wooden shelves with thickness of 19 mm Finish: Plastic coated Installation: For hooking into slots in column A Internal width 565/940 B Pitch length 625/1,000 C Length over engagement hooks 621/996 A B C Information The pitch length varies depending on the columns that are used, single or double slotted. Dimensions for wooden shelves with W 625 and D 370: 613 x 338 mm W 1,000 and D 470: 988 x 438 mm Load bearing capacity 50 kg, inclinable Version: With 2 hooks and 2 grooves for dividers, inclinable (+10, 0, 20 ) Installation: Hooking into slots in wall channel or column depending on required angle of incline When insert wall channels shell frame only inclined down at 20 installable. Load bearing capacity 80 kg, rigid Length over engagement hook C mm Packing: 2 pcs. Version: With 3 hooks and 2 grooves for dividers Packing: 2 pcs. Pitch length B mm White aluminium, RAL 9006 621 625 770.76.262 996 1,000 770.76.264 Length over engagement hook C mm Pitch length B mm White aluminium, RAL 9006 621 625 770.76.266 996 1,000 770.76.268 We reserve the right to alter specifications without notice (HTH Furniture Fittings 20). FF.26
Book bracket Finish: Plastic coated Version: With 3 hooks Installation: Hooking into single or double slotted wall channels and columns Material Steel Packing: 4 pcs. Colour White aluminium, RAL 9006 770.81.040 Basket Finish: Plastic coated white aluminium, similar to RAL 9006 Pitch dimension: 1,000 mm Load bearing capacity: 20 kg Version: With 2 suitable brackets for basket Installation: Hooking into single or double slotted wall channels and columns We reserve the right to alter specifications without notice (HTH Furniture Fittings 20). Material Steel Colour White aluminium, RAL 9006 770.33.220 FF.27
Clothes hanger rail Area of application: For single or double slotted wall channels and columns Length: 400 mm Version: Inclined, with 2 hooks and 9 hook-in positions Installation: Hooking into slots in wall channel or column Material Steel Colour Chrome plated 772.70.240 Clothes rail Installation: Inserting into clothes rail support of bracket Material Steel Colour Chrome plated 771.73.258 Clothes rail support Trim cap Installation: Supporting clothes rail between 2 double slotted columns Material Plastic Installation: Plugging into clothes rail Material Plastic Colour White, RAL 9003 Colour Grey 771.73.791 771.73.590 We reserve the right to alter specifications without notice (HTH Furniture Fittings 20). FF.28
Clothes rail bracket Support rail Area of application: Mounting clothes rail to single or double slotted wall channels and columns Finish: Plastic coated Load bearing capacity: 30 kg Version: With 3 hooks and oval clothes rail support Installation: Hooking into slots in wall channel or column Material Steel Colour White, RAL 9003 772.73.208 Application: Holding clothes hangers and clothes hanger rails on single or double slotted wall channels and columns Finish: Chrome plated Version: With flat oval rail 15 x 30 mm, welded Installation: Hooking into slots in wall channel or column White aluminium, RAL 9006 Clothes hanger rail for clothes rail bracket 770.73.233 Length over engagement hook C mm Pitch length B mm 621 625 772.51.262 We reserve the right to alter specifications without notice (HTH Furniture Fittings 20). Finish: Plastic coated, with chrome plated extending rod Version: With extending rod Installation: Screwing to bracket with clothes rail support Supplied with fixing material Material Steel Colour White, RAL 9003 White aluminium, RAL 9006 772.73.0 770.73.210 996 1,000 772.51.264 FF.29
Carrier frame Application: Carrying clothes hangers and clothes hanger rails on single or double slotted wall channels and columns Finish: Chrome plated Version: With flat oval tube 15 x 30 mm, welded Installation: Hooking into slots in wall channel or column Length over engagement hook C mm Pitch length B mm 621 625 772.50.206 996 1,000 772.50.210 Removable display rail Finish: Chrome plated Installation: Hooking into the support rail Carrier arm, straight Ø Depth D mm Packing: 1 or 10 pcs. Installation: Hooking into support rail and support frame Diameter mm 150 7 772.52.215 250 772.52.225 300 9 772.52.230 400 772.52.240 Material Steel Finish Chrome plated 772.54.241 We reserve the right to alter specifications without notice (HTH Furniture Fittings 20). FF.30
Carrier arm, angled Installation: Hooking onto support rail and support frame Material Steel Finish Chrome plated 772.54.242 Clothes hanger rail, inclined with balls Version: Angle of incline 30, with 9 balls for hanging clothes hangers Installation: Hooking onto support rail and support frame Material Steel Finish Chrome plated 772.54.240 We reserve the right to alter specifications without notice (HTH Furniture Fittings 20). FF.31
Shop fitting system Display 150 Linear design with high flexibility The Display System 150 system provides countless combination options due to its different finishes and extensive range of display rails. The 150 mm groove intervals and continuous profiles make it possible to display products of any kind in the best possible way regardless of whether they are big or small. The display rails and shelves are also available in different materials, and are attached without the need for tools. Shop fiting system Single A classic design with a wide range of possibilties The Single shopfitting system makes it possible to present many different product ranges in an individual way. All elements can be used individually or combined. The different display rails and shelves are inserted into the base plate without using tools and can be replaced at any time. Any supporting structure can be used. Shop fitting system Display 200 Clear design for demanding customers Display 200 system is combine function and fitting to this system. The point syspension if not hanging any display arm is make linear decorate plate. All elements can be used individually or combined. The diffent display arms are inserted into point syspension or rail syspension without using tools and can be replaced at anytime. We reserve the right to alter specifications without notice (HTH Furniture Fittings 20). FF.32
Shop fitting system - Display 150 Wall panel Hook-in profile, rectangular Area of application: For sliding into groove of wall panel Material: Aluminium Finish: Bright Length 1200 mm 790.56.100 Packing: 1 or 14 pcs. Material: Chipboard Finish: Melamine coated Order reference Dimensions (W x H x D): 1,200 x 1,200 x 19 mm Please order 7 additional hook-in profiles for each panel and Version: Prepared with 7 complete grooves and 1/2 grooves on the 1 additional hook-in profile for panel connection. We reserve the right to alter specifications without notice (HTH Furniture Fittings 20). horizontal edge for connecting panels Colour White Marple Pear Light beech Packing: 2 pcs. Order reference Please order hook-in profiles separately. 790.56.507 790.56.521 790.56.522 790.56.523 Special sizes available on request. FF.33
Clothes hanger rail Finish: Chrome plated Straight with end cap Version: Rail Ø16 mm Length mm 310 790.57.270 Inclined Version: Oval rail 30 x 15 mm, with 8 hook-in positions Dimensions mm 310 x 150 790.57.272 Curved Version: Arm Ø6 mm, with 7 hook-in positions Ø Dimensions mm 265 x 150 mm 790.57.274 We reserve the right to alter specifications without notice (HTH Furniture Fittings 20). FF.34
Display rail Finish: Chrome plated With straight pin Version: Rail Ø6 mm Area of application: Suitable for DIY packaging Ø Depth T mm 200 790.57.202 300 790.57.203 With loop rail Version: Rail Ø4 mm Depth T 200 mm 790.57.210 300 mm 790.57.2 We reserve the right to alter specifications without notice (HTH Furniture Fittings 20). Carrier frame Version: Oval clothes rail 30 x 15 mm Finish: Chrome plated polished Width mm 900 790.57.230 FF.35
Display rail Finish: Chrome plated Side bracket Area of application: Lateral support for shelves Version: Supporting plate with 2 slots for shelf attachment Wide support surface for increased load capacity Depth T mm 290 790.57.221 Packing: 1 pair Centre bracket Area of application: Lateral and centre support for shelves Version: Supporting plate with 4 slots for shelf attachment Wide support surface for increased load capacity Depth T mm 290 790.57.220 We reserve the right to alter specifications without notice (HTH Furniture Fittings 20). FF.36
Bracket for glass shelves Finish: Chrome plated Depth T mm 290 790.57.240 Packing: 1 pair Buffer, self-adhesive Material: Plastic (polyurethane) Installation: Self-adhesive (permanently self adhesive by non-aging acrylate adhesive) Shore hardness A 60 70 Moulded in blocks (set) UV resistant, no yellowing, wear-free Colour Transparent 356.21.420 We reserve the right to alter specifications without notice (HTH Furniture Fittings 20). Partition holder Packing: 50 pcs. Finish: Chrome plated Depth T mm 290 790.57.250 Packing: 1 pair FF.37
Information Shopfitting system - Single The Single shopfitting system consists of: Support plate Garment display rails (clothes hanger rail or shelf support) Installation The support plate is recessed and fixed to the rear of the panel by screwing it on with a plate. The garment display rail is hooked into the support plate. We reserve the right to alter specifications without notice (HTH Furniture Fittings 20). FF.38
Support plate Material: Zinc alloy Finish: Chrome plated matt Depth: 19.5 mm, 10 mm visible Version: With aluminium rear plate Installation: For groove mounting into panel Fixing material: 4 Screws M5 x 18 mm Supplied with 1 Support plate 4 Screws M5 x 18 mm Support plate 790.49.400 Clothes hanger rail We reserve the right to alter specifications without notice (HTH Furniture Fittings 20). Finish/colour: Plastic coated, fine structure, white aluminium, similar to RAL 9006 Installation: For suspending in support plate Version: With stop Straight Inclined, 60 Depth T mm 300 790.49.910 Depth T mm 280 790.49.9 Order reference Support plate must be ordered separately. FF.39
Shelf support Area of application: For supporting glass or wooden shelves Finish/colour: Plastic coated, fine structure, white aluminium, similar to RAL 9006 Version: With 4 O-rings for shelf support and clothes rail with lateral adjustment Shelf support 790.49.920 Order reference Support plate must be ordered separately. Shelf with labelling strip Finish/colour: Plastic coated, fine structure, white aluminium, similar to RAL 9006 Version: With insertion slot for product description Shelf with labelling strip Order reference Support plate must be ordered separately. 790.49.930 We reserve the right to alter specifications without notice (HTH Furniture Fittings 20). FF.40
Shop fitting - Display 200 Point and rail suspension: Easy and quick Installation on different materials and directly on masonry wall. No special tools for processing and installation required. Processing and installation: Pre-drill holes in workshop Panels can easily be stacked for transport Attach panel, e.g. with EILOX hook-in profile, to wall Secure point and rail suspensions with screws Hook in display arms, shelf supports and shelves without tools Further advantages for the customer Additional point or rail suspension can be installed on site without removing the panel, if required. Point suspension Area of application: For hooking in display arms, shelf supports and shelves Finish: Cover cap: Nickel plated matt For panel thickness: From 18 mm Load bearing capacity: Approx. 15 kg We reserve the right to alter specifications without notice (HTH Furniture Fittings 20). Installation with screw-in sleeve and M6 screw Supplied with 1 Screw-on plate and 1 support plate 2 Grub screws SW 2 1 Cover cap 1 Set fixing material for wooden panel 8 mm drill hole for screw-in sleeve Screw in screw-in sleeve, connect screw-on plate and support plate with screws and align Screw in grub screws (anti-twist device) Clip on cover cap Version Installation with sleeve and M6 790.96.691 FF.41
Rail suspension Area of application: For hooking in display arms, shelf supports and shelves Finish: Cover cap: Nickel plated matt For panel thickness: From 18 mm Load bearing capacity: Approx. 25 kg Installation on wooden panel with chipboard screw Drill hole in panel for 4.5 mm chipboard screw Connect rail with screws Clip on cover cap, an additional substructure must be installed for panel thicknesses below 18 mm For screw fixing directly on masonry wall (optional) Supplied with 1 Rail 1 Cover cap Length mm 1,000 790.96.601 1,200 790.96.602 3,000 790.96.605 Order reference Fixing material for rail suspension not supplied, please order separately. We reserve the right to alter specifications without notice (HTH Furniture Fittings 20). FF.42
Display arms Area of application: For point and rail suspension Finish: Nickel plated matt Version: With hook-off protection device for support plate, with plastic buffer to prevent dents on the panel Straight Area of application: For hanging clothes hangers Version: With stop pin Depth T mm 130 790.97.601 260 790.97.602 380 790.97.603 2 Levels Area of application: For hanging clothes hangers Version: With 2 stop pin We reserve the right to alter specifications without notice (HTH Furniture Fittings 20). Curved Depth T mm 385 790.97.610 Area of application: For hanging clothes hangers Version: With 10 stop pin Depth T mm 410 790.97.620 FF.43
Shelf supports and display rails Area of application: For point and rail suspension Finish: Nickel plated matt Version: With hook-off protection device for support plate, with plastic buffer to prevent dents on the panel Wooden and glass shelf support Area of application: For 8 mm wooden or glass shelves Version: With transparent glass shelf supports and removable glass fixing brackets with plastic cap Depth T mm 228 790.97.632 327 790.97.633 Wooden and glass shelf support for display Area of application: For 8 mm wooden or glass shelves, for holding display rail Version: With transparent glass shelf supports and removable glass fixing brackets with plastic cap, with ring for display arm Ø21 mm Ø Depth T mm 338 790.97.643 We reserve the right to alter specifications without notice (HTH Furniture Fittings 20). FF.44
Carrier for display rail Area of application: For holding display rail Version: With ring for display arm Ø21 mm Ø Depth T mm 338 790.97.695 Display rail Ø21 mm Ø Area of application: For sliding into carrier arm, for hanging in cloth hanger Version: With ring for display arm Ø21 mm Ø Length L mm 620 790.97.651 1,000 790.97.652 1,220 790.97.653 Wooden and glass shelf supports We reserve the right to alter specifications without notice (HTH Furniture Fittings 20). Area of application: For 8 mm wooden or glass shelves, e.g. for shoes or bags Version: With transparent glass shelf supports and removable glass fixing brackets with plastic cap Depth T mm 238 790.97.690 FF.45
Shelf Area of application: For point and rail suspension, for displaying products, for hanging clothes hangers Material: Stainless steel Finish: Brushed Version: With hook-off protection device for support plate, with 22 apertures for clothes hangers Depth T mm Dim. A mm 360 330 790.97.061 500 790.97.062 1,000 790.97.063 We reserve the right to alter specifications without notice (HTH Furniture Fittings 20). FF.46
HV Organization drawer The HV drawer is qualified for use at shoptitting. Through the low cover height from 64 mm the HV drawer is very well applicable, where are to be placed quite a few particles at immediate space. By the high-quality of guide with self-closing drawer runner and damping we get at best running characteristics and highest comfort. From cover raster 64 mm Longitudinal and lateral dividers enabled a individual organization. All single components may be combined as necessary. Drawers Guides Divider Rail Locks Inserts We reserve the right to alter specifications without notice (HTH Furniture Fittings 20). Insert made of beech enabled a optimal organization and presentation theirs products. By using of longitudinal and lateral dividers the division may be conform optimal to their requirements. Longtudinal divider with slot adequate for any installation depth Cross divider with different surfaces. Adequate card holder enabled a marking of division FF.47
Pharmacy Systems PHARMA-ORG Storage and pharmacy installation system PHARMA-ORG Frame systems Space-saving stocking and organizing The storage and pharmacy installation system basically consists of following components: Basic frame Vertical frame Guide frame/guides Drawers With different possible combinations the system can be adapt to nearly any situation. Such may circumvented on site available hindrances how drainpipes or water conduits by application of varied depth of drawers, which enabled a optimal room usage. Furthermore the bulky accessories offer the possibility of an optimal storage and organization. The different label systems enabled a excellent overview and a quick access to the desired product. Guide frame 2 pcs./column (attached at each 1/3 of the column height) Base plate, length 60 mm Tie bar Base plate, length 100 mm Basic frame Guide rail Spacer bracket Tie bar Extension We reserve the right to alter specifications without notice (HTH Furniture Fittings 20). FF.48
Pharmacy Systems PHARMA-ORG Base frame Quick and easy assembly A stable basic frame is produced independently of the vertical frame, it is placed on the floor and horizontally adjusted using the adjustable base plates. It is advisable to attach the base plates to the floor after they have been aligned. The basic frame is the basis of the PHARMA-ORG drawer system. The individual vertical frames are inserted into the basic frame and screwed in place, preventing them from moving forwards or sideways. Planning the basic frame Basic frames are available for 1 5 columns. The adjustable base plates in the basic frame are 60 mm long on the outsides, and 100 mm long inside the central vertical frame (two-sided). A 100 x 100 mm foot plate is recommended for distributing the pressure on soft surfaces such as screed. installation depth Total length = (400 mm) x number of columns + 20 mm vertical frame thickness + side panel material thickness We reserve the right to alter specifications without notice (HTH Furniture Fittings 20). Basic frame extensions An extension for 5 additional columns is available for basic frames for 1 5 columns. A combination of the 5 basic frames with the extension will solve any layout problem. PHARMA-ORG Vertical frames and panel intervals Vertical cross-section Any panel height is available in steps of 25 mm, starting at 100 mm. The maximum panel height of 250 mm should not be exceeded. The vertical frames are available with and without central locking. Information We can also supply special sizes up to a total height of 2,500 mm on request. FF.49
Pharmacy Systems PHARMA-ORG Drawers and extensions Drawer depth 1,220 Useful depth 1,157 Drawer depth 1,020 Useful depth 948 Drawer depth 820 Useful depth 748 Drawer depth 620 Useful depth 548 Extension length Installation depth Drawer depth Sewage pipes Water pipes Iron beam PHARMA-ORG Drawer variations and accessories Double flue Examples at ground plan A combination of drawer types with four different installation depths overcomes structural obstacles in a space-saving way and provides a solid, evenstorage system front. Functional, stylish and user-friendly The drawers can be equipped with front panels made of solid wood, glass or plastic and inserts made of wood, plastic, textile, glass or metal. They therefore make an impression on the pharmacy s image and adapt to the overall architectural impression. The drawers can be optionally equipped with a wooden panel that is available in different types of wood for suspending from the punched keyholes or with Vario frame handles for sliding onto the front panel. The drawer bottoms are coated with melamine or made of perforated metal or acrylic glass. They are designed to withstand weights of approximately 25 kg (distributed over the entire drawer). We reserve the right to alter specifications without notice (HTH Furniture Fittings 20). FF.50
Pharmacy Systems Equipment Suitable for all PHARMA-ORG drawers Base with melamine coating Clip in partition Mini compartment partition with extension Drilling dimensions for front panel attachment Label holder with clip in sliding divider Acrylic glass base Acrylic glass base Bases made of acrylic glass are available for ease of use. Transparent acrylic glass bottoms allow you to view the contents of drawers placed above eye level from underneath. Perforated metal base Perforated metal base The perforated metal bases with square punched holes are insensitive to soiling and provide good ventilation. Lower edge of panel We reserve the right to alter specifications without notice (HTH Furniture Fittings 20). Clip on panels and railing system for flexible drawer heights A bordering system with panel that can be screwed to the drawer is available for items with particularly large volumes (total height = 2 x front panel height). Side rail Fitting the front additional panel Front clip on panel Side rail Rear additional panel, fitted Rear clip on panel FF.51
Bar Railing Systems Gallery railing system Material: Stainless steel, SUS 304 Finish: Matt brushed or PVD coated brass coloured Gallery rail Length: 2,500 mm solid material Diameter mm Stainless steel coloured Brass coloured 6 812.20.600 812.20.800 10 812.22.600 812.22.800 Gallery rail post Material: Zinc alloy Finish: PVD coated Diameter: 10 mm (for 6 mm rail) or 15 mm (for 10 mm rail) For 1 rail Gallery rail end post with blind hole Press-in dowel for wood For 2 rails Gallery rail centre post with through hole Threaded sleeve for glass For glue fixing to glass We reserve the right to alter specifications without notice (HTH Furniture Fittings 20). FF.52
Bar Railing Systems Gallery rail post for 1 rail 6 mm Gallery rail post for 1 rail 10 mm Installation Stainless steel coloured Brass coloured Installation Stainless steel coloured Brass coloured With through hole as centre post With through hole as centre post Press-in dowel 812.26.600 812.26.800 Press-in dowel 812.27.600 812.27.800 Threaded sleeve 812.26.601 812.26.801 Threaded sleeve 812.27.601 812.27.801 For glue fixing 812.26.602 812.26.802 For glue fixing 812.27.602 812.27.802 With blind hole as end post With blind hole as end post Press-in dowel 812.26.620 812.26.820 Press-in dowel 812.27.620 812.27.820 Threaded sleeve 812.26.621 812.26.821 Threaded sleeve 812.27.621 812.27.821 For glue fixing 812.26.622 812.26.822 For glue fixing 812.27.622 812.27.822 Gallery rail post for 2 rail 6 mm Gallery rail post for 2 rail 10 mm We reserve the right to alter specifications without notice (HTH Furniture Fittings 20). Installation With through hole as centre post Press-in dowel Threaded sleeve For glue fixing With blind hole as end post Press-in dowel Threaded sleeve For glue fixing Stainless steel coloured Brass coloured 812.26.610 812.26.810 812.26.6 812.26.8 812.26.612 812.26.812 812.26.630 812.26.830 812.26.631 812.26.831 812.26.632 812.26.832 Installation With through hole as centre post Press-in dowel Threaded sleeve For glue fixing With blind hole as end post Press-in dowel Threaded sleeve For glue fixing Stainless steel coloured Brass coloured 812.27.610 812.27.810 812.27.6 812.27.8 812.27.612 812.27.812 812.27.630 812.27.830 812.27.631 812.27.831 812.27.632 812.27.832 FF.53
Bar Railing Systems Support rings for 6 mm rail Installation 1 180 for gallery rail end post 2 180 for gallery rail centre post 3 90 for gallery rail end post 4 135 for gallery rail centre post Area of application: For angled rail system or as design variant Materail: Zinc alloy Finish: PVD coated Version For 6 mm rail Stainless steel coloured Brass coloured 180 for gallery rail centre post 812.27.860 812.26.860 180 for gallery rail end post 812.27.870 812.26.870 90 for gallery rail end post 812.27.840 812.26.840 135 for gallery rail end post 812.27.850 812.26.850 Installation dimensions Dim. A = Pitch length Dim. B = Rail length Dim. B = Dim. A-3 mm (one sided installation on gallery rail post) Dim. B = Dim. A+4 mm (two sided installation on gallery rail post) We reserve the right to alter specifications without notice (HTH Furniture Fittings 20). FF.54
Bar Railing Systems Bar railing system The multitude of components make this system extremely flexible and usable almost anywhere. There are many ways of fixing rails to wall, floor and ceiling surfaces: Installation with railing support brackets Installation information Installation with handrail support brackets A support bracket or holder has to We reserve the right to alter specifications without notice (HTH Furniture Fittings 20). be mounted every 700 mm and at a distance of 150 mm from each end of the rail. Support brackets or holders should be mounted at both ends of elbow sections. The rails can be screwed or glued to the holders. Both methods provide comparable stability, but glued connections are permanent. Installation with foot rail support brackets Direct fixing of rail ends to surfaces FF.55