Operaton and confguraton nstructons covva smartbox TKP100A WLAN stck TKH180 Power supply (replacement requrement) TKC110 Page 1/30 05-2017
Inhalt Desgn and layout of the devce...3 Scope of delvery...3 Optonal accessores...3 Functon...4 System nformaton...4 Correct use...5 Product characterstcs...5 The admnstraton process...6 1 Preparatons...6 Role concept...6 myhager account...6 Install covva moble-app...7 Call up covva web app...7 2 Project mplementaton...8 Log n to the app as admnstrator...8 Add user...9 Edt/remove user...10 3 Confguraton adapton...11 Update devce software...11 Add devce to the project...11 Add Netatmo weather staton...11 Combne devces nto groups...12 Edt/remove group...13 Create covgram...15 Example 1: Temperature warnng:...15 Example 2: Outdoor lghtng:...17 Example 3: All OFF:...18 Edt/remove covgram...20 Add devce to the favourtes lst...22 Remove devce from the favourtes lst...22 Change settngs...23 4 Operaton...24 Operatng concept...24 Carry out a networkreset...27 RGB LED dsplay...28 Remote mantenance...28 Set up remote acces s...28 Appendx...30 User profles and rghts...30 Accessores...30 Page 2/30 05-2017
Desgn and layout of the devce (1) (10) (9) (11) (8) (4) (2) ONLINE WLAN POWER (7) (6) 005587... (3) GC03/16 (5) (15) (12) (13) (14) (16) Fgure 1: Rear/sde vew and accessores (1) RGB LED dsplay (2) USB connecton sockets (3) RJ45 connecton socket (LAN) (4) Connecton power supply (5) QR code wth covva ID (6) Operaton LED POWER (7) WLAN Dsplay - only actve wth optonal WLAN stck (see Accessores) (8) Status dsplay ONLINE (9) Acknowledge button OK (10) Button RESET (11) Protectve cover Scope of delvery covva smartbox Adapter plate for wall mountng (12) Power supply 230 V~/5 V (13) RJ45 connecton cable, Cat 5e (14) Optonal accessores WLAN stck (15) WLAN adapter (16), not avalable n every country Page 3/30 05-2017
Functon System nformaton The covva smartbox forms the nterface of wrelessly communcatng devces such as KNX rado actuators or Twn Band devces and WLAN as well as IoT applcatons to the exstng IP nfrastructure va a network router. Electrcal loads and functons of the buldng control can be nterlnked, vsualsed, montored and operated on moble end devces or statonary computers by means of a moble app or browser-based web app. In ths way, locaton-ndependent access to the buldng management system - va the home network and va the Internet - can be ensured and at any tme. Ths soluton s especally desgned for mplementng smart Home functons and comfort n modernsed or retroftted systems. moble-app Web-App Internet Global access 1) Local access Buldng control 1) WLAN/IoT Moble communcatons Rado (KNX rado, TwnBand) 1) Not avalable n every country. Fgure 2: Applcaton envronment Page 4/30 05-2017
moble-app Web-App Lghtng Lght- and sun protecton Temperature control Securty devces Extenson Correct use Fgure 3: System overvew Interface for wreless communcaton wth recevers/actuators va the IP network Operaton and vsualsaton on (moble) end devces va covva app Connecton to the network router by cable or va optonal WLAN stck. The devce s only sutable for ndoor areas. Product characterstcs secure system admnstraton va user profles wth dfferent rghts control of KNX rado systems and WLAN applcatons va moble app for moble end devces or web app for notebook, PC, smple creaton of scenes (covgrams) va the app self-confgurable messages after events remote access and remote mantenance va ntegrated Dyn DNS servce Logc operatons Updates wth notfcatons avalable onlne Page 5/30 05-2017
Zet Eregns Manueller A... Zet Lcht Steckdose Hezung Wetter. Setzen auf überschretet untersc covva smartbox The admnstraton process Prepare the smartbox n three steps for operaton of buldng management systems: Auslöser Wählen se enen Auslöser Spechern Zurück Detals Spechern Wählen se en Gerät Stehlampe Sofa_85105100 Aus Auslöser Wählen Gruppen Szene TV... Temperatur Temperatur Temp Zu Favorten hnzufügen covva myhager Gerät entfernen Preparaton Project mplementaton Confguraton adapton Operaton 1 Preparatons Role concept User profles wth dfferent access rghts must be managed n the smartbox: User profle Access rghts myhager account Installer durng the project Requred - unlmted rghts after the handover, f requred: - Remote access after release by the admnstrator Admnstrator for one user per smartbox: Requred - Confguraton rghts for addng/removng devces - Admnstraton of all users User name normal rghts for adaptng and not requred operatng the system Table 1: User profles Example Installaton engneer, planner Bulder Famly members, fellow occupants Detaled nformaton on the access rghts per user profle can be found n an overvew table n the appendx. myhager account In order to manage a project wth the smartbox, successful regstraton as an admnstrator accordng to the role concept (Table 1) under s necessary. Go to the webste and clck on regster now. Or: Scan the QR code wth an approprate app, swtch to the covva homepage and select Regstraton. Fll out the personal data, agree to the use of personal data and confgure account wth Send. An e-mal wth a confrmaton lnk for actvatng the myhager account wll be sent to you (Fgure 4). Clck the Complete regstrerung button n the /covva e-mal to actvate the account Later, you can also vew completed covva projects va the account (Fgure 5). Page 6/30 05-2017
Hager Ltd. 97.11.1969 Busness address * Busness address Company * Hager Ltd. Street / house number* Hortonwood 50 Postal Code* TF1 7FT Place* Telford, Shropshre Country* Unted-Kngdom DD.MM.YYYY Prvate address Input (265) Phone +44 1952677899 Moble phone no. Consent * I agree that the personal data gven here may be combned, processed and used wth other personal data that you have about me so that you are able to present products and solutons to me that talored specfcally to my requrements and nterests. Please read on here Newsletter Yes, please send me newsletters to nform me of new products, servces and software updates from Hager Vertrebsgesellschaft. Welcome to covva! Your electrcan has set up your covva Box for you. To beneft from the full range of functons supported by your connected home, you wll need a myhager account. You can create a myhager account easly for my.clent@emal.com rght now: Complete regstraton * Mandatory felds Send Fgure 4: myhager account Install covva moble-app Log n to the correspondng app store on the end devce and select the covva app. Download and nstall app. The app requres at least verson IOS 7.1 or Androd 4.1 or hgher on the moble end devce. The IOS app s optmsed for Phones. Pad users must use the Phone only settng when runnng searches n App Store Call up covva web app As an alternatve to the moble app, t s also possble to access the smartbox after project take over va a web portal from a PC, notebook or moble end devce wth a Wndows operatng system. An HTML5 compatble browser such as Chrome, Safar, Internet Explorer or Frefox s requred. The user nterface s smlar to the covva moble app and provdes the same functons n a sutable format for larger screens. Enter the URL customsed wth the ID: https://12-stellge covva ID.koalabox.net/webapp n the browser. The web app opens. The web app can also be called up n ths way: Log nto the myhager account and select My covva projects. Open the web app va. The end devce and smartbox must be onlne each tme the web app s subsequently used. My account My software My covva Installatons Your covva nstallatons ID Customer's e-mal address Installaton engneer's 0024C6F21834 my.clent@emal.com meer@emal.com covva: Intellgent retroft wreless technology Wth the wreless covva system for smart homes, you are offerng your customers a soluton for an ntellgent home. Ideal for retroft, renovaton or modernsaton projects. Learn more now! Fgure 5: myhager project vew Page 7/30 05-2017
2 Project mplementaton Log n to the app as admnstrator (Fgure 6) Followng project handover, the admnstrator automatcally receves an e-mal n the covva app from hs or her nstaller ndcatng that Connected Home can now be used and contanng the access data (e-mal address). The admnstrator can now log n to the covva app. The (moble) end devce s onlne. Open the covva app. The covva ID for connectng to the smartbox s dsplayed. If ths s not the case, use and the (moble) end devce's camera to scan n the covva ID shown on the rear sde under the cover or enter t va the keypad. Select Logn to change over to the logn page. The admnstrator must have a myhager account. If an account has not yet been created, followng handover, the user wll be forwarded to the regstraton page the frst tme he or she attempts to log n (see settng up myhager account). Enter User name and the Password for the myhager account and log n wth Add user. If the General Term of Use (GToU) for the covva app have not yet been accepted n the my- Hager account, the correspondng web page must be accessed at ths pont. To do ths, press the myhager ANB button. Accept the ANB va the checkbox and complete the operaton va. Afterwards, log n agan to the app. Input (265) Back Logn General terms and condtons... Welcome to covva! Your electrcan has set up your covva Box for you. You can now enjoy your connected home. Welcome to covva! The unque ID on the rear of your covva controller connects you drectly to your covva 0024C6F21834 my.customer@emal.com In order to use the covva app, you must accept the general terms and condtons of use for your myhager account. Please press the myhager ANB button to contnue myhager ANB Download the covva app: Download the app to your devce here. Logn Q W E R T Y U I O P Your myhager access data: my.clent@emal.com Knd regards, Your Hager Vertrebsgesellschaft team Logn Test wthout logn A S D F G H J K L Z X C V B N M.?123 space return Hager Ltd. Hager Ltd. Terms of use Please confrm the terms and condtons of use for your covva Smartbox. Terms of use Please confrm the terms and condtons of use for your covva Smartbox. my devces Celng lght lvng Wall lght lvng ro... Personal data covva terms and condtons of use * I accept the covva terms and condtons of use of dated 31/01/2017. * Mandatory felds Thank you We have saved your consent n your myhager account. Please now re-open the covva app on your smartphone or tablet, navgate back to the logn form and enter your myhager password agan. You should be able to actvate the app mmedately. Standard lamp_85... Lvng Scene TV Publcaton detals Data prvacy Cooke polcy Hager Ldt. Publcaton detals Data prvacy Cooke polcy Hager Ltd. Fgure 6: E-mal and admnstrator logn Page 8/30 05-2017
Add user (Fgure 7) The admnstrator can set up a user profle wth correspondng access rghts (see Table 6) for all tenants and vstors for operatng the buldng control va the covva app. As local operaton also functons offlne, we recommend that as the admnstrator you create an addtonal user profle for yourself wth standard access rghts (user). As a user, you can log nto the app and reman logged n wthout havng to valdate the access data onlne. In the man menu press and call up the settngs wth. Select All users The Users vew s called up. Add a user wth the button n the top rght corner. Assgn the level of rghts to the user wth Classc (User) va the checkbox. Confrm wth or dscard va. Then select n successon: Frst name and last name E-mal address and telephone number User name and passwort Each entry must be confrmed wth or dscarded va Back. The new profle s dsplayed n the overvew of all users. Settngs Settngs Users Add User covva Devces Groups Covgrams covva ID 0024C6F21834 Date/Tme 09.11.16, 00:00 covva Language Englsh covva Vers. 2.6.7(cc24680) Me My Account Others Meer Prncple Installer User rght Please choose whch type of user you want to add Classc Favortes KNX Verson 1.1.13 Logout Alarm Verson 1.0.6 Users My account Prncple All Users Back Add User Back Add User Back Add User Settngs User Name Please ndcate the name of the Name new User covva Contact nformaton Please ndcate the contact nformaton of the new user Name and Password Please enter the name and password of the Wf network you want to create. My Account Me Others Prncple Forename Peter E-Mal Peter@emal.com Name Peter@emal.com Meer Installer Surname Musterman Phone 04452/918951 Password Peter Classc Repeat pas. Q W E R T Y U I O P Q W E R T Y U I O P Q W E R T Y U I O P Q W E R T Y U I O P A S D F G H J K L A S D F G H J K L A S D F G H J K L A S D F G H J K L Z X C V B N M Z X C V B N M Z X C V B N M Z X C V B N M.?123 space return.?123 space return.?123 space return.?123 space return Fgure 7: Create user Page 9/30 05-2017
Edt/remove user (Fgure 8) The Settngs page has been called up. The saved data s dsplayed va next to a user. Then carry out the followng actons as requred: A new password can be assgned wth Change password, whch must be confrmed wth or dscarded va Back. All rghts n the app are wthdrawn from ths user va the Delete User button. The user profle for the nstaller cannot be removed. The password for them can only be changed on Hager webste (see myhager account). If other user data was entered ncorrectly or must be changed, for example, a new e-mal address should be entered, the user must frst be deleted va Delete User and created agan wth the correct data. Alternatvely, the nstaller can perform a user reset on the smartbox n order to restore the project to ts status pror to handover. Settngs User User Peter Peter Change password User Max Me My Account Others Prncple Surname E-mal Mustermann Contact Peter@emal.com Password Repeat pas. Surname E-mal Mustermann Contact Max@emal.com Meer Installer Phone 04452/918951 Phone 04452/918951 Peter Classc Profle Profle User name Peter@emal.com User name Max@emal.com Rghts Change password Classc Q W E R T Y U I O P A S D F G H J K L Rghts Change password Classc Z X C V B N M Delete User.?123 space return Delete User Settngs User Settngs Me My account Others Meer Prncple Installer covva ID 0024C6F21834 Date/Tme 09.11.16, 00:00 covva Language Englsh covva Vers. 2.6.7(cc24680) KNX Verson 1.1.13 Alarm Verson 1.0.6 Users My account User.?123 space return All Users Fgure 8: Edt/remove user Page 10/30 05-2017
3 Confguraton adapton The followng descrptons are based on the moble app n the IOS system. The Androd app as well as the descrptons n the Web app may vary slghtly from ths, but the functons, buttons and messages are dentcal. Update devce software (Fgure 9) If a software update s avalable for the smartbox, ths s dsplayed va a message. We recommend carryng out the update mmedately n order to get new functonal mprovements and to prevent ncompatbltes. Start the update wth Install. The RGB dsplay (1) of the smartbox flashes durng the update. It goes out after successful completon of the update. The operaton may take a few mnutes. If the connecton s dsconnected durng the update, restore the connecton wth Retry. If the update s to be carred out at a later tme, frst declne the update va Later. Each tme the app s subsequently opened, the update wll be offered agan. my devces Update avalable A new update for your covva controller s avalable. Durng the update process the covva controller wll be not reachable for some mnutes. Install Later Fgure 9: Software Update for the Smartbox Add devce to the project Each devce must be ntegrated ndvdually. Press the blue button. The context menu for selectng the devce category for the product to be ntegrated opens. The lst of compatble products s avalable under /covva. Add Netatmo weather staton (Fgure 10) The weather staton (ndoor module) has been commssoned and has been regstered n the WLAN network. A Netatmo account has been created. In the context menu select Connected devce. The vew for enterng the access data of the Netatmo account opens. Enter E-mal address and password for the Netatmo account of the customer and fnsh va Let s go. The connecton setup of the app va the smartbox to the Netatmo account s dsplayed n the app. If the connecton s successful, Netatmo s dsplayed. Actvate the lne wth the descrpton and change the name for the weather staton f requred. Page 11/30 05-2017
Fnsh the operaton wth or swtch to the man menu va Back. The added devce s dsplayed under my devces. Carry out the operaton wth each addtonal, compatble devce untl all Netatmo devces have been added and unquely named. Add a devce Back Detals my devces Celng lght lvng Wall lght lvng ro... Addng Netatmo weather staton Enter the user name and password of your Netatmo account. Weather staton my devces Celng lght lvng Wall lght lvng ro... Standard lamp s... Peter@emal.com Groups none Standard lamp sofa What knd of devce would you lke to add? Netatmo Cancelar 1 2 3 4 5 6 7 8 9 - / : ; ( ) #+=.?123 Let's go & @.,?! space 0 return Measurements Temperature 23,3 C Humdty 35% CO2 881 ppm Sound meter 57dB Pressure 1028 mbar Weather staton Lghtng frst floor Frst floor 20 C Fgure 10: Add Netatmo devces Combne devces nto groups (Fgure 11) Devces can be combned nto groups for easy navgaton. In ths way, all devces can be grouped, for example, room by room or per floor. To do ths, press the green button. A context menu for selectng whether a group or zone should be added f thermostats are nstalled, s dsplayed. Select Add group. A lst wth all devces s dsplayed under a new Group. The ttle lne under s actvated. Gve the group a name va the keypad. The desred devces are added by actvatng the relevant checkbox of ths group. Assgn the devces to ths group wth or dscard va. The group s dsplayed n the man menu. Devces can be added to a group at any tme. To do ths, press on the group. The combned devces n the group are dsplayed. Press the blue button. All devces not yet added to ths group are dsplayed. Select the devces to be added va the checkbox. Assgn the devces to the group wth or dscard va. The added devces are dsplayed n the devce lst of the group. Go back to the man menu va Back. Page 12/30 05-2017
Group Back Eat-n ktchen my devces my devces my devces Celng lght lvng Celng lght lvng... Wall lght lvng ro... Wall lght lvng ro... Eat-n ktchen Wall lght lvng ro... Standard lamp so... Standard lamp so... Celng lght lvng Standard lamp so... Wall lght lvng room Lvng Scene TV Standard lamp sofa Q W E R T Y U I O P A S D F G H J K L Lvng Scene TV Z X C V B N M Eat-n ktchen.?123 space return Devces Back Eat-n ktchen my devces my devces Celng lght lvng Celng lght lvng Celng lght lvng Celng lght ktchen Celng lght ktchen Wall lght lvng ro... Workplace lght ktchen Workplace lght kt... Standard lamp so... Mrror hall Blnd ktchen Celng lght hall Blnd lvng room Wall lght bathroom Blnd ktchen Blnd lvng room Lvng Scene TV Eat-n ktchen Fgure 11: Create group, add group The combnng of devces for heatng control such as thermostats n a zone takes place n the same way as wth a group and s ntated by selectng Add hot water zone. A zone s also dsplayed n the man menu under. Edt/remove group (Fgure 12) The groups can be edted n the app or removed agan at any tme. Press n the top rght corner of the man menu. All elements n the man menu are swtched to edt mode. Select the group to be edted va the on the correspondng group. Detals about the group, such as the swtchng state and ntegrated devces, are dsplayed. Then carry out the followng actons as requred: Change the name of the group by actvatng the name lne and makng an entry va the keypad. Add Devces to ths group or remove t from ths va the dsplayed checkboxes. Delete Group from the project. The group s no longer dsplayed n the man menu. Wth the excepton of Delete, fnally confrm all edt operatons wth or dscard va Back. The dsplay returns to the man menu and dsplays the changes. Press n the top rght corner of the man menu to ext the edt mode. Page 13/30 05-2017
Back Detal my devces Celng lght lvng Wall lght lvng ro... Lvng room Standard lamp_851... Devce Celng lght lvng Delete Lvng Scene TV Eat-n ktchen Q W E R T Y U I O P A S D F G H J K L Z X C V B N M.?123 space return my devces Back Detal Detal Devces my devces Celng lght lvn... Celng lght lvng Celng lght lvng Wall lght lvng r... Lvng Wall lght lvng room_tr... Wall lght lvng room Standard lamp... Devce Celng lght lvng Standart lamp_85105100 Standard lamp_851... Delete Lvng Lvng room Scene TV Scene TV Eat-n ktchen Eat-n ktchen.?123 leerzechnen return my devces Celng lght lv... Wall lght lvng... my devces Celng lght lvng Wall lght lvng ro... Standard lamp... Standard lamp_851... Scene TV Eat-n ktchen Scene TV Eat-n ktchen Fgure 12: Edt/remove group Page 14/30 05-2017
Create covgram Covgrams are deal for frequent or condtonal actons that should be controlled and/or automatcally trggered. A covgram defnes a scene, n whch a defned trgger starts one or more actons. Dfferent trggers are possble for the same acton(s). Trggers and actons are defned va If Then -logc functons. In the course of ths, several trggers are OR-lnked, whle several actons are AND-lnked. Bascally three types of trggers can be defned: Tme: Ths allows a daly routne to be confgured at a specfc tme or one/several weekday(s) to be selected, when one/several acton(s) s/are to be trggered at a specfc tme. Event: Ths allows a devce wth a respectve swtchng/operatng state to be selected, whch then forms the trgger for one/several acton(s). A group cannot be defned as a trggerng event. Play: When selectng the manual trgger, one/several acton(s) can be started exclusvely by an operaton n the app. Defnable types of actons for the trgger are: Devce: One or several devces can be selected from all added devces and ther swtchng/operatng state, whch should be reached after the trgger, can be defned. Push notfcaton: An ndvdually created text message can be wrtten for one/several trggers, whch appears as a push message for all users n the app when trggered. Tmely nformaton can be helpful n order to ntate a countermeasure f requred. Once the project has been handed over, the nstaller does not receve a push message any more. In the event that the app s not opened, the push message s addtonally output on the end devce, f enabled. Partal: If a zone s selected as an acton, a heatng zone can be controlled after trggerng, for example, a new temperature setpont s receved or another operatng state s swtched to. In ths way, many combnatons are possble. As an example, three tasks wll be mplemented one after another n one covgram each: Example 1: Temperature warnng (Fgure 13): Task: If the room temperature drops below 18 C n the bedroom or chldren's room, a message should be sent n order to check ths actvely and to ntate countermeasures f requred. To do ths, press the red button. The edtng page Covgramm opens. The ttle lne under s actvated. Gve the covgram a name va the keypad and termnate the entry wth the Return button. Defne trgger Press the button under If. The page for defnng a trgger opens. Select the type of trgger, n the example Event. The button of the trgger type s hghlghted n red. All devces of the project are lsted wth symbolc buttons and ther name. The dsplay can be swped to the left and rght. Page 15/30 05-2017
Select the devce by pressng the symbolc button, n the example Heatng bedroom. Possble trggers are dsplayed. Select the trgger by pressng the symbolc button, n the example Temperature Moves under. The button of the trgger s hghlghted n red. Set the desred mnmum temperature usng the scroll wheel, n the example 18 C. Fnsh the settng of the trgger wth or dscard va. The trgger s dsplayed under Covgramm. Add another trgger n the same way f requred, whch s OR lnked, va the button, n the example Heatng chldren's room. my devces Celng lght lvng Covgrams Choose a trgger Trgger Choose a trgger Trgger Wall lght lvng r... Temperature warnng Tme Event Play Tme Event Play Standard lamp... If... Choose a devce Choose a devce or Blnd Lght Celng lg. Heatng Heatn. Tme Lght Socket Heatng Weather Lvng Scene TV Then... Q W E R T Y U I O P A S D F G H J K L Set trgger Temperature Set to Temperature moves under Temp moves Z X C V B N M.?123 space return Trgger Covgrams Covgrams Tme Event Play Tme Lght Heatng Heatng Netatmo Set trgger Temperature warnng If... Temperature warnng Temperature Set to Temperature Temp moves under moves If...... Heatng... or Heatng... Heatng... or Adjust value Then... Then... Temperature 16,5 17,0 17,5 18,0 18,5 19,0 19,5 < 18,0 C and.?123 save return and.?123 save return Fgure 13: Covgram for example 1: Trgger Defne acton Press the button under Then. The page for defnng an acton opens. Select the type of acton, n the example Push notfcaton (Fgure 14). The button of the acton type s hghlghted n red. Only a possble acton s dsplayed n the example. Select the acton by pressng the symbolc button, n the example Notfcaton sent to every user. The button of the acton s hghlghted n red. The keypad and an nput feld for the message opens. Page 16/30 05-2017
Enter a message va the keypad. the acton and message wth or dscard va. The trggers and acton are dsplayed under Covgramm. the covgram agan va or dscard va. The vew swtches to the man menu. The created covgram s dsplayed under. Acton Acton Covgrams my devces Devce Push n. Zone Choose an acton Push notfcat. Notfcaton sent to every user Push notfcat. Notfcaton sent to every user Edt notfcaton The temperature has fallen below the mnmum temperature. Please change operaton mode or ncrease the setpont. Temperature warnng If... Heatn. S. Heatn. K. or Wall lght lvng ro... Standard lamp_85... Lvng then... Scene TV Q W E R T Y U I O P A S D F G H J K L Push n. and Z X C V B N M Temperature warnng.?123 save return.?123 save return Example 2: Outdoor lghtng (Fgure 15): Fgure 14: Covgram for example 1: Acton Task: On Saturday and Sunday the outdoor lghtng should be swtched on at 19:00 and on the other weekdays at 17:00 every evenng. To do ths, press the red button. The edtng page Covgramm opens. The ttle lne under s actvated. Gve the covgram a name va the keypad and termnate the entry wth the Return button. Defne trgger In the fle vew of the covgram va under If select the type of trgger, n the example Tme. The buttons for trggerng Every day or Every weekday are offered at a specfc tme. Press the Every weekday button. Select the days Sa and Su. Set the tme for the acton n the format hour:mn usng the scroll wheels - here 19:00 - and fnsh wth. Add the second trgger for the remanng weekdays n the same way va for Mo - Fr at 17:00 and fnsh wth. Defne actons Select the types of actons va under Then, n the example Devce. All devces are dsplayed. Select a devce - here lght Entry. Upon the occurrence of one of the trggers, select the swtchng state of the devce (swtched on/swtched off) va the buttons provded - n the example Lghtng entry Swtched on - and fnsh wth. Add the remanng lghts n the outdoor area va n the same way as the acton beng executed smultaneously - lght Pavement, lght Housewall,..., select the swtchng state Swtched on and fnsh wth. Page 17/30 05-2017
Complete the covgram wth. The covgram s dsplayed n the man menu. If the outdoor lghtng should be swtched off agan at a specfc tme n the mornng, a separate covgram must be created for ths. Trgger Back Detal Trgger Trgger Choose a trgger Choose a trgger Choose a trgger Tme Event Play Outdoor lght Tme Event Play Tme Event Play Choose a devce Every day at a certan tme Every weekday at a certan tme If... Choose a devce Every day at a certan tme Every weekday at a certan tme Choose a devce Every day at a certan tme Every weekday at a certan tme eve. Sa. Su. or Mo. Tu. We. Th. Fr. Sa. Su. at a certan tme 19.00 Then... Adjust trgger tme Mo. Tu. We. Th. Fr. Sa. Su. at a certan tme 17.00 Adjust tgger tme Mo. Tu. We. Th. Fr. Sa. Su. at a certan tme.. 17.00 17 58 18 59 19 00 20 01 21 02 and Delete Covgram 15 58 16 59 17 00 18 01 19 02 15 58 16 59 17 00 18 01 19 02 Back Detal Trgger Back Detal Choose a trgger Outdoor lght If... eve. Sa. Su. eve. Mo... or... Tme Event Play Choose a devce Input Sdewalk Housewa. Bedroom Ktche Outdoor lght If... Eve. Sa. Su. Eve. Mo... or Then... Set trgger Input Swtch on Input Swtch off Then... and Input Sdewalk Housewa. and Delete Covgram Delete Covgram Example 3: All OFF (Fgure 16): Fgure 15: Covgram for example 2 The entre lghtng n the house should be swtched off and all blnds closed by manually pressng a button, for example, when leavng the house or when gong to bed. To do ths, press the red button. The edtng page Covgramm opens. The ttle lne under s actvated. Gve the covgram a name va the keypad and termnate the entry wth the Return button. Defne trgger In the fle vew of the covgram va Play. The button for Trgger covgram wth Play button appears. Actvate button and fnsh wth. In the detaled vew of the covgram under If select the type of trgger, n the example under If s dsplayed. Page 18/30 05-2017
Defne actons Va under Then select the types of acton, n the example Devce. All devces are dsplayed. Select a devce - here Celng lght lvng. By manually trggerng, select the swtchng state of the devce (swtched on/swtched off) va the buttons provded - n the example Celng lght lvng Swtched off - and fnsh wth. In the detaled vew of the covgram under Then s dsplayed. Add the remanng lghts n the house va n the same way - Wall lght Lvng, Standard lamp,... -, select the swtchng state Swtched off or when dmmng, set the value 0% usng the scroll wheel and fnsh wth. Now set all blnds n the house to closed. Select a devce - here blnd ktchen. The button for... Set to certan value appears. Actvate button, usng the scroll wheel set the value to 100% (closed) and fnsh wth. In the detaled vew of the covgram under Then... s added. Defne all other blnds n the house n the same way as acton. Complete the covgram wth. The covgram s dsplayed n the man menu. Trgger Covgram Trgger Covgram Choose a trgger Choose a trgger Tme Event Play Choose a devce Play Trgger covgram wth Play button If... Play or All OFF Tme Event Play Choose a devce Celng lg. Wall lght Stand. la. Bedroom Ktche If... Play or All OFF... Then... and Set trgger Celng lght lvng Swtched on Celng lght lvng Swtched off Then... Celng l. and Covgram Trgger Covgram Devce Push no. Zone All OFF If... Set trgger... Ktchen lvng Ktchen... ro. Bedroom chldr. ro. Study Set to certan value moves Play or Then... Wall lg. Standa. la. Bedroom and Choose a devce Adjust value Blnd lvng room 97,0 98,0 99,0 100,0 100,0% If... Play Then... or All OFF Bedroom Chld. ro. Study and Delete Covgram Szene Scene TV Wohnküche Eat-n ktchen Temperature warnng Outdoor lght All OFF Fgure 16: Covgram for example 3 Page 19/30 05-2017
Edt/remove covgram (Fgure 17) Press n the top rght corner of the man menu. All elements n the man menu are swtched to edt mode. Select the covgram to be edted va on the correspondng Covgram. Detals about the covgram are dsplayed. Then carry out the followng changes as requred: Change the name of the covgram by actvatng the name lne and make an entry va the keypad. Fnsh wth the Return button. Add further trggers under If va the button. The page for defnng a further trgger opens. Proceed as descrbed above. Add further actons under Then va the button. The page for defnng a further acton opens. Proceed as descrbed above. Remove a covgram from the man menu va the Delete Covgram button. To edt or remove an acton or trgger that has already been saved, press and hold the correspondng symbol. Select one of the buttons shown Edt or Delete and proceed as descrbed above. Wth the excepton of, fnally confrm all edt operatons wth Delete Covgram or dscard va Back. The dsplay returns to the man menu and dsplays the changes. Press n the top rght corner of the man menu to ext the edt mode. Page 20/30 05-2017
Back Detal Wall lght lvng ro... Wall lght lvng r... Standard lamp_85... Temperature message Standard lamp... Scene Tv Eat-n ktchen Temperature warnng If... Heat. S. Heat. K. or Then... Q W E R T Y U I O P A S D F G H J K L Z X C V B N M.?123 blank return Scene Tv Eat-n ktchen Temperature messa... Detal Back Detal Wall lght lvng r... Wall lght lvng... Standard lamp... Scene Tv Eat-n ktchen Temperature warnng If... Heat. S. Heat. K. or Then...... Temperatur warnng If... Heat. S. Heat. K. Netatmo or Then... Standard lamp... Scene Tv Eat-n ktchen Push n. and Push n. Dmmer S. and Temperature warnng Temperature warnng Delete Covgram Delete Covgram Celng lght lv... Celng lght lvng Wall lght lvng r... Wall lght lvng ro... Standard lamp... Standard lamp_85... Scene Tv Eat-n ktchen Scene Tv Eat-n ktchen Fgure 17: Edt/remove covgram Page 21/30 05-2017
Add devce to the favourtes lst (Fgure 18) Devces, whose connected loads are frequently operated, can be added for fast access under my favortes. To do ths, press the orange button. A lst wth all devces that have not yet been defned as favourte s dsplayed. Add devces to my favortes by actvatng the checkbox. Defne the devces as favourtes wth or dscard va. The favourtes are dsplayed n the man menu. Favortes Scene Tv Eat-n ktchen Temperature warnng Outdoor lght Celng lght lvng_tre202_k1 Wall lght lvng room_tre202_k1 Standard lamp sofa_85105100 Temperature warnng Outdoor lght All OFF All OFF my favortes my favortes Celng lght lvng... Wall lght lvng Fgure 18: Defne favourtes Remove devce from the favourtes lst (Fgure 19) Press n the top rght corner of the man menu. All elements n the man menu are swtched to edt mode. Select the devce n the favourtes lst to be removed va on the relevant devce. Detals about the devce, such as the swtchng state and the groups n whch the devce s ntegrated, are dsplayed. Press the Remove from Favortes button. Wth remove the devce from my favortes or dscard va Back. The removed devce s no longer dsplayed n the man menu under my favortes. Press n the top rght corner of the man menu to ext the edt mode. Addtonal devces can be added to or removed from the favourtes lst n the same way. Back Detals Eat-n ktchen Eat-n ktchen Temperature warnng Standard lamp_85105100 Outdoor lght Temperature warnng Temperature warnng All OFF Groups None Outdoor ktchen Outdoor lght my favortes Remove from favortes Alles OFF All OFF Celng lght lv... Remove Devce my favortes my favortes Wall lght lvng r... Wall lght lvng... Wall lght lvng ro... Fgure 19: Remove favourtes Page 22/30 05-2017
Change settngs (Fgure 20) Basc changes n the app can be mplemented and some nformaton can be vewed under the settngs. Call up the page for settngs under va. Possble settngs or further nformaton are ndcated by n the rght margn of the correspondng lne. If such a lne s selected, a new page opens wth the correspondng settng optons (see Table 2). Confrm any changes to the settngs wth, dscard va or return to the prevous page wthout savng va. Fnally, ext the settngs va. Settng Selecton Informaton Format/Detal/Acton covva smartbox covva ID 123456789012 Date/tme Tme zone Tme perod Country DD.MM.JJJJ, hh:mm CET Summer tme Germany Language 2) Englsh, French, Italan, German, Swedsh, Dutch, covva Verson 2.6.7 (cc24680) KNX Verson 1.1.13 Alarm Verson 1.0.6 User (see also Add user) My account Name Frst name Last name Admnstrator Contact E-mal Phone Profle E-mal (user name) rghts Change password? All users I Admnstrator all profle data (see above) only dsplay, not changeable Other Installer unlmted all profle data (see above) only dsplay, not changeable access for nstallers for remote mantenance (de) actvatable all profle data changeable Add user see Add user Network IP address 192.168.178.23 WLAN covva Hotspot functon actvated Name covva - 123456789012 Hotspot functon deactvated Dsplay of all WLAN networks - Select WLAN network. - Enter WLAN password. 2) The app generally uses the language set n the relevant end devce. Ths settng only defnes the language for emals and push messages. Table 2: Settngs and system nformaton Page 23/30 05-2017
Settngs Settngs Add User my devces covva ID 0024C6F21834 my favortes Date/Tme 09.11.16, 00:00 covva Language Englsh covva Vers. 2.6.7(cc24680) KNX Verson 1.1.13 Alarm Verson 1.0.6 Englsh Franças Italano Deutsch Swedsh Dutch Settngs Users Me My Account Prncple Users My account All Users Referent Meer Max Max Others Installer Classc Classc... Network IP adress 192.168.178.23 The IP adress wll show here, as soon as you connnect your covva controller Settngs Wf settngs covva Devces Groups Covgrams Favortes The IP adress wll show here, as soon as you connect your covva controller va LAN to a router (DHCP) Hotspot mode Actvate the Hotspot mode f want your covva controller to open up ts own Wf network. CHOOSE NETWORK... FRITZ-Box Logout and Handover Wf cov.0024c6f21834 The status LED of your covva controller wll turn on when a complant wf extenson s nstalled. App Verson {{verson}} Copyrght Hager Group 2015 All rghts reserved Fgure 20: Call up/change settngs 4 Operaton Operatng concept After loggng n to the app (see Log n to the app as admnstrator) the man menu s opened. Dstnctons are made between the followng categores: My devces My groups My covgrams My favourtes You access these categores n the man menu by swpng (moble app) or scrollng (web app) up or down. Page 24/30 05-2017
my devces Blnd lvng room 50% Dmmer Bedroom 100% Socket lvng room Heatng Bedroom 23,5 C Heatng Chldre... 23,5 C Netatmo Basc Netatmo Outdo... 22,6 C 4,8 C Alternatvely, you can select the desred category drectly va. my devces Blnd lvng room 50% Dmmer bedroom 100% covva Devces 50% 100% Temperature warnng Socket lvng room Heatng bedroom 23,5 C Heatng Chldre... 23,5 C Groups Covgrams Favortes 23,5 C 23,5 C Outdoor lght All off Lght Netatmo Basc 22,6 C Netatmo Outdoo... 4,8 C Logout 22,6 C 4,8 C my favortes Wall lght lvng... Every user can operate all confgured applcatons and retreve nformaton regardless of the user profle. Page 25/30 05-2017
The operatng concept s ntutve and corresponds to the routnes of other app operatons. Below s an overvew of the basc operatng modes and applcatons n the covva app (see Table 3). Instead of a touch operaton or a swpe movement, operaton va the web app takes place solely by mouse clck or by draggng wth the left mouse button pressed down as well as by scrollng. Dsplay Operaton/dsplay Applcatons (as an example) My devves (Operaton): Open/close the dsplay by touch n the correspondng devces lne Socket lvng ro... On En Dmmer Bedroom 71% Blnd Lvng room 50% Temperature Humdty CO2 Sound meter Pressure measurements 21,3 C 35% 513 ppm 50 db 1028 mbar Touch swtch ON/OFF Dsplay of the swtchng state Swpe to the left/to the rght swtch ON/OFF, dm LIGHTER/DAR- KER Dsplay n % (0%: OFF, 100%: ON) Swpe to the left /to the rght move UP/DOWN Dsplay n % (0 %: open, 100 %: closed) Lght control: - Swtch lght - Swtch load on socket outlet Lght control: - Set brghtness of a lght Heatng chldr... 23,5 C Touch / ncrease/decrease value 21,5 C Touch on symbol change operatng mode Dsplay of the measured temperature My devces (Informaton): Open the dsplay n settng mode va on the correspondng devces lne Weather stat. 21,9 C Dsplay the measured sensor values wth Physcal sensors: number and measurng unt Blnd control: - Movement poston of a blnd/roller shutter - Slat poston of a blnd Heatng control: - Adjust setpont n 0.5 C ncrements - Select operatng mode Comfort, Nght Reducton, Frost Protecton Measured values of a weather staton, such as: - Indoor temperature - Relatve humdty ndoors - CO 2 content of the ndoor ar - Volume n the room - Ar pressure ndoors Wth other modules the correspondng data must be read off from outdoor sensors. My groups: Selecton by touch on Back Eat-n ktchen my devces Wall lght lvng r... n the correspondng group lne All devces of the group are dsplayed as under My devces and can be operated as descrbed above. On Callng up a devce lst wth a touch, for example: - all lghts on the ground floor - all loads n the lvng/dnng/ktchen area My covgrams: Open/close the dsplay by touch n the correspondng Covgram lne Touch Outdoor lght actvate/deactvate Operate several loads smultaneously, event-drven, for example: - Swtch on all outdoor lghts at twlght. If the event has already occurred when actvatng a covgram, the stored acton s not executed. The covgram must be actvated before the event occurs. Page 26/30 05-2017
All off Touch manual trggerng of a scene - Swtch OFF all loads when leavng the house. My favourtes: Open/close the dsplay by touch n the correspondng favourtes lne Wall lght lvng r... On orange - and can be operated as descrbed above. All devces of the favourtes lst are dsplayed as under My devces - but n a lst each wth a touch Operate the most-used devces grouped n Table 3: Operatng concept The smartbox can be used n the local envronment even wthout an Internet connecton provded that no applcatons have to be controlled, whch only functon onlne, such as remote access, notfcatons or the Netatmo dsplay of measurement data. Carry out a networkreset A manual network reset can be performed on the smartbox. Reset Mode Trgger Consequences of the reset Network reset Loss of the WLAN - Resettng of the network settngs access key - Actvaton of the local access Other settngs, project and user profles reman unchanged. Table 4: Reset (1) (10) ONLINE WLAN POWER 005587... GC03/16 Keep RESET button (10) pressed for more than 5 seconds, untl the RGB LED dsplay (1) s slowly flashng blue. Release RESET button (10) brefly and press once agan to confrm the selecton of the reset mode. Rapd blue flashng of the RCB LED dsplay (1) confrms the successful reset. > 5 s 1 x Fgure 21: Network reset Page 27/30 05-2017
RGB LED dsplay The smartbox has a dsplay (1) for sgnallng errors that occur or for dsplayng the process of operatons (see Table 5). sgnal Flashng red Cause Crtcal warnng, such as fre or burglary Permanent red lght Hardware or software error Flashng yellow Techncal warnng, such as low-battery status of a devce n the nstallaton Flashng blue Update, a software update s beng nstalled Table 5: RGB LED dsplay (1) Remote mantenance The smartbox allows convenent remote access by the nstaller n order to work n the project wthout havng to be onste wth the customer. Wth remote access t s possble, for example: to check the state of the nstallaton to adjust the confguraton to change settngs to vew event logs to add or remove users to create or change covgrams Covgrams. Remote access s frst possble after project take over by the admnstrator. Therefore, the admnstrator must authorse the nstaller explctly for remote mantenance. Remote access s possble ether va the moble app or va the web app (see Call up covva web app). Set up remote acces s The Smartbox s onlne. In the man menu press and call up the settngs wth. Select All users. The Users vew s called up. Select the nstaller's user profle. Actvate the Installaton access. The nstaller can now log back nto the project and edt t remotely n lne wth customer requrements. Page 28/30 05-2017
Settngs Settngs User Users Meer covva Devces Groups Covgrams Favortes covva ID 0024C6F21831 Date/Tme 09.11.16.00:00 covva Language Englsh covva Vers. 2.6.7 (cc24680) KNX Verson 1.1.13 Me My account Others Meer Max Prncple Installer Classc Installaton access Name Forename Surname Contact E-mal mke.fscher@berker.de Logout Alarm Verson 1.0.6 Phone My account All users User Prncple.?123 space return Profle Usernam. mke.fscher@berker.de Rghts Installer Fgure 22: Authorse nstaller for remote mantenance Page 29/30 05-2017
Appendx User profles and rghts User profle Rghts Installer 1) Admnstrator User name Defne admnstrator Add user Remove user Create a new project Add/remove comfort devce Add/remove Netatmo devces Add/remove safety devces Create groups Edt/remove groups Create covgrams Edt/remove covgrams Add to favourtes Remove from favourtes Install update before project handover Install update after project handover Hand over project Accept project Authorse for remote mantenance Carry out remote mantenance Change settngs 3) These rghts apply for the entre project process and durng remote mantenance Table 6: User profles and rghts Accessores WLAN stck WLAN adapter Replacement requrement Power supply TKH180 TKH181 TKC110 Page 30/30 05-2017