cq Ftdllf ~ ret ~q ret ~:II crill. Indian Maritime University

Similar documents
PROCUREMENT OF SERVO CONTROLLED VOLTAGE STABILIZER FOR STPI-NASIK

NATIONAL POWER TRAINING INSTITUTE (WR) (Ministry of Power, Govt. of India) NAGPUR TENDER DOCUMENT SUPPLY OF DRAWING TABLES AND STOOLS

INVITATION FOR QUOTATION. TEQIP-II/2015/UP1G01/Shopping/60

Invitation of quotation for Camera At All India Institute of Medical Sciences, Jodhpur

NOTICE INVITING TENDER Limited Tender on Single Bid Basis Milling Cutters. Tender Enquiry No: Due Date:

INVITATION FOR QUOTATION. TEQIP-II/2013/UP1G01/Shopping/28

PROCUREMENT OF GOODS UNDER OPEN TENDER PROCEDURE

[Corporate Communications Department] Notice Inviting Tender

Delhi Regional Office, F-8-11 Flatted Factory Complex, Rani Jhansi Road, NEW DELHI ===========================================================

INDIAN INSTITUTE OF TECHNOLOGY KHARAGPUR , INDIA

MDI/ESTATE/PGPM HOSTEL FURNITURE/ , May Sub: Supplying of Furniture for PGPM Student Hostel at MDI Campus, Gurgaon

INVITATION FOR QUOTATION. TEQIP-III/2018/vecl/Shopping/82

TENDER (OPEN & SHORT TERM TENDER OF 07 DAYS)

TENDER (OPEN & SHORT TERM TENDER OF 07 DAYS)

UNIVERSITY OF ENGINEERING AND TECHNOLOGY, TAXILA (PROCUREMENT CELL)

E-5 PROCUREMENT OF GOODS UNDER NATIONAL SHOPPING PROCEDURES

INVITATION FOR QUOTATION. TEQIP-III/2018/iiit/Shopping/57/5182. Sub: Invitation for Quotations for supply of Laboratory Equipment.

University Visvesvaraya College of Engineering

Bharat Heavy Electricals Limited (High Pressure Boiler Plant) Tiruchirappalli , TAMIL NADU, INDIA MATERIALS MANAGEMENT / CAPITAL EQUIPMENT

INVITATION FOR QUOTATION

TECHNICAL SPECIFICATIONS FOR BOLT HEATING EQUIPMENT

[Corporate Communications Department] Notice Inviting Tender

INVITATION FOR QUOTATION. TEQIP-II/2013/UP1G01/Shopping/43

INVITATION FOR QUOTATION. TEQIP-II/2017/btec/Shopping/2

Indian Institute of Information Technology, Pune

Pakistan International Airlines Procurement Logistics Department Commercial Purchases Section Tel: , Fax:

INVITATION FOR QUOTATION. TEQIP-II/2013/UP1G01/Shopping/39

NATIONAL DOPE TESTING LABORATORY JAWAHARLAL NEHRU STADIUM, EAST GATE, LODHI ROAD, NEW DELHI

JAWAHAR VIDYA MANDIR, SHYAMALI, RANCHI-2

INSTRUCTION FOR BIDDERS FOR PROVIDING ARCHITECTURAL CONSULTANCY SERVICES FOR THE UPGRADATION OF A GOVERNMENT HOSPITAL IN KERALA

INDIAN INSTITUTE OF TECHNOLOGY KHARAGPUR Tender No. IIT/GG/SKG/Furniture/ /2 Date:

DEPARTMENT OF ARCHITECTURE

DEPARTMENT OF ECOLOGY, ENVIRONMENT AND REMOTE SENSING

Regents Physics Mr. Mellon Based on Chapter 22 and 23

PROCEDURE FOR INSPECTION OF ELECTRICAL INSTALLATIONS ABOVE 250KVA

Questions Bank of Electrical Circuits

Basic Electrical Engineering

Question Paper Profile

RAJKIYA ENGINEERING COLLEGE, KANNAUJ

Tender Ref: ELCOT/Proc/OT/32954/Multimedia Projectors/

Ref No: HOlTaarangan/SMS/ /-1763 Date: 16 th Dec, 2013

SECTION - II BID DATA SHEET

fcgkj ljdkj ¼Je lalk/ku fohkkx½ fcgkj dks'ky fodkl fe'ku] fu;kstu Hkou] csyh jksm] bade VSDl xksyecj ds ikl nwjhkk"k ua0&0612&

Certificate by the Architect: Certified that no addition and deletion has been made to the tender documents downloaded from the IIT Madras web site.

TENDER COVER PAGE (CHECK LIST)

Business reform Action Plan Rec # 299 to 303 Certification of Electrical Installation by Electrical inspectorate

Procurement UNDP Sudan

QUOTATION. Procurement of Equipments for Physics Laboratory

INSTRUCTION FOR BIDDERS FOR

No. COA/BHL/2018/293 Dated: REQUEST FOR QUOTATIONS

United Nations Development Programme

izòkxh; ou vfìdkjh dk dk;kzy;

Ref No : PUR/GT/IMP/VELC-ADITYA/20/ September 19, 2016.

POTENTIAL TRANSFORMER

Tender Notice No.14/17(1)/2015-SSS/31 January 14, 2016

INVITATION FOR EXPRESSION OF INTEREST

SPECIFICATIONS FOR TENDER # SUPPLY OF ONE WIRELESS CLOCK SYSTEM & ASSOCIATED COMPONENTS FOR WESTERN HEALTH

TOURISM CORPORATION OF GUJARAT LIMITED

SUB: EMPANELMENT OF CONSULTANCY AGENCIES FOR BUILDING PROJECTS/WORKS.

ESE 230 Syllabus Prof. D. L. Rode

Annexure - V. Specifications, Typical Drawing & Data Sheet for Split TEE (Hot Tapping Material)

NIT No. CDI/ NIT/ 004/ Dated: 18 th October 2017

VALLIAMMAI ENGINEERING COLLEGE

SHRI RAMSWAROOP MEMORIAL COLLEGE OF ENGG. & MANAGEMENT B.Tech. [SEM I (EE, EN, EC, CE)] QUIZ TEST-3 (Session: ) Time: 1 Hour ELECTRICAL ENGINEE

/TENDER ENQUIRY NO :ENQ/17-18/005148/BP26(07) Delivery Schedule. Test Certificate

The RSM shall be extensively used in field & laboratory for verification of the accuracy of all types of single-phase energy meters.

Downloaded from / 1

No. 6-13/2018-DAF/Quotations Dr. Ambedkar Foundation Ministry of Social Justice & Empowerment *******

ECE 215 Lecture 8 Date:

KINGS COLLEGE OF ENGINEERING DEPARTMENT OF ELECTRICAL AND ELECTRONICS ENGINEERING QUESTION BANK UNIT I BASIC CIRCUITS ANALYSIS PART A (2-MARKS)

Geethanjali College of Engineering & Technology

ELECTRIC CIRCUITS. Third Edition JOSEPH EDMINISTER MAHMOOD NAHVI

شركة كهرباء محافظة القدس المساهمة المحدودة JERUSALEM DISTRICT ELECTRICITY CO. LTD.

Module 1. Introduction. Version 2 EE IIT, Kharagpur

Electrical And Electronics Engg

Lesson Plan. Week Theory Practical Lecture Day. Topic (including assignment / test) Day. Thevenin s theorem, Norton s theorem

Electrical Circuits and Systems

TR CRITERIA FOR LABORATORY ACCREDITATION IN THE FIELD OF ELECTRICAL DCLF METROLOGY. Approved By: Senior Manager: Mpho Phaloane Revised By:

GOVERNMENT POLYTECHNIC, KHAMGAON QUOTATION

Gautam Buddha University

Hours / 100 Marks Seat No.

MILITARY SPECIFICATION LIGHTING, INSTRUMENT, INTEGRAL, WHITE GENERAL SPECIFICATION FOR

PROCUREMENT PROCEDURE OF CPRI (NON WORKS) Dt of Revision : Issue Dt. :

INVITATION FOR QUOTATION. TEQIP-III/2018/uiej/Shopping/23

TECHNICAL SPECIFICATION

OFFICE OF THE PRINCIPAL ACCOUNTANT GENERAL (A&E), ODISHA : BHUBANESWAR. No. Rec-I(A&E)/ Stnry/ /03 Date : TENDER CALL NOTICE

DIPLOMA IN (ELECTRICAL/ INSTRUMENTATION & CONTROL ENGG I-SEMESTER ELECTRICAL ENGINEERING (COURSE NO: BEE-101)

TENDER DOCUMENT FOR PURCHASE OF: ENDMILL CUTTERS, HSS DRILL BITS ETC. Tender Number: /46/GWS, Dated:

School of Community Science and Technology Indian Institute of Engineering Science and Technology, Shibpur Howrah

ELECTRICAL CIRCUITS LABORATORY MANUAL (II SEMESTER)

Operating Manual Ver.1.1

KHADI AND VILLAGE INDUSTRIES COMMISSION (MINISTRY OF MICRO, SMALL & MEDIUM ENTERPRISES)

REQUEST FOR QUOTATION INVITATION

Our Ref: SRO/BM/C Date:

Operating Manual Ver.1.1

Schedule - 20 LED LAMPS

Designation CS XX(I th. Thermal Code No. Type, layout and symbol Weight Packaging CS U 10A CS U 16A

The Corporation of the City of Nelson Office of the Finance and Purchasing Manager Telephone : (250) Fax : (250)

University f P rtland Sch l f Engineering

SOUTHERN ELECTRICITY SUPPLY COMPANY OF ODISHA LIMITED (SOUTHCO UTILITY)

Transcription:

cq Ftdllf ~ ret ~q ret ~:II crill. Indian Maritime University (~ ~~OI~~ Iclll, 'iffio mefir I A Central University, Govt. of India) Cfllcl(f)ldl ~ I Kolkata Campus No. IMU-KC/Laboratory Equipmentll7-18 Date: 21.06.2017 Sub: Quotation for procurement ofinstruments for Electrical Machine Laboratory at IMU-Kolkata Campus Sealed quotations are invited towards procurement of Electrical Machine Laboratory at lmu-kc under wo bid systems i.e. Technical Bid and Financial Bid. The details of the instruments are as follows: SI. Items Specifications Qty. Unit No. 01 Determination of Digital voltmeter 3.5 digit, digital ammeter 3.5 digit. test zig 01 Set equivalent resistance to carry the experiment smoother. Active component to carry of the resistors when the experiment. Input 230v ac 50 Hz ± 1 Ov. Dust proof close they are connected in type box laminated with powder coating 70 microns. Patch Series, Parallel and chord 2mm multi pole type and instruction manual. Series-parallel combinations. of 18 gauge CRC sheet, Powder coating, J.P. Protection. 02 Characteristics of All terminals of the meters etc. are brought out on BS-4 01 Set Fluorescent lamps terminals for flexible connection. All meters, voltage source, networks are fitted I mount on Bakelite sheet which fitted on self stand, foot mounted, Table top, power coated MS sheet of 18 gauge CRC sheet, Powder coating, l.p. Protection. 03 Characteristics of Richardson Equations, Model ETB-198 01 Set Tungsten filament lamps of 18 gauge CRC sheet, Powder coating, J.P. Protection. 04 Verification of Verification of laws & Network theorem in DC circuits with 01 Set Thevenin's theorern., power supply and 2 meters (C.R.), Norton's theorems, Model ETB-064. Maximum power Verification of superposition Therernins & reciprocity theorem and theorem with PIS and 4 digital meter (C.R), Superposition theorem Model ETB-20 I of 18 gauge CRC sheet, Powder coating~ J.P. Protection. 05 Study of R-L-C Series Series and Parallel Resonance ETB-030, A.C.Millivoltmeter, 0 I Set and parallel circuit Model ACV-25, Audio frequency generator 20 Hz to 200 KHz O/P 0-20V RMS, model AO-300, A.F.Milliammeter O- S ma, Model AF-205MO, Study of resonance in LCR circuit & Damping Effect Model Es-215, Audio frequency generator 20 Hz to 200 KHz O/P 0-20VRMS,model AO-300. of 18 gauge CRC sheet, Powder coating, LP. Protection. N-19, dl(ld(yl1 m, Cf)1(YlCf)ldl-700 088/P-19, Taratala Road, Kolkata -700 088 Email: director.kol@imu.co.in Phone: (033) 24014673174176178/1946, Fax: (033) 2401 4333, Hostel: 2401 4675

06 Measurement of All terminals of the meters etc. are brought out on BS-4 01 Set power Il1 a three terminals for flexible connection. All meters, voltage source, phase circuit by two networks are fitted / mount on Bakelite sheet which fitted on watt meter method. self stand, foot mounted, Table top, power coated MS sheet of 18 gauge CRC sheet, Powder coating, I.P. Protection. 07 Measurement of All terminals of the meters etc. are brought out on BS-4 01 Set energy (single and 3 terminals for flexible connection. All meters, voltage source, phase) using suitable networks are fitted / mount on Bakelite sheet which fitted on energy meter self stand, foot mounted, Table top, power coated MS sheet of 18 gauge CRC sheet, Powder coating, J.P. Protection. 08 Measurement of the Networks are fitted / mount on Bakelite sheet which fitted on 01 Set insulation resistance self stand, foot mounted, Table top, power coated MS sheet ofa electrical machine and continuity test by the megger of 18 gauge CRC sheet, Powder coating, I.P. Protection. 09 Measurement of All terminals of the meters etc. are brought out on BS-4 01 Set energy (single and 3 terminals for flexible connection. phase) using All meters, voltage source, networks are fitted / mount on suitable energy meter Bakelite sheet which fitted on self stand, foot mounted, Table top, power coated MS sheet panel with required Armstrong's of 18 gauge CRC sheet, Powder coating, J.P. Protection. 10 Star-Delta Starter for Open type Star-Delta circuit for 37kW motor. 01 Set electrical machines of 18 gauge CRC sheet, Powder coating, I.P. Protection. Terms & conditions: (i) The tender is for all the items i.e. 01 to 10. A bidder may quote for individual item or all the items in the tender. Each item will be considered on the basis of Ll price for that item. (ii) The Bid submitted will be evaluated based on the details of technical qualification submitted by the bidder under Cover I in the prescribed formats to ascertain whether the bidders qualify. The Cover 1I (Price Bid) of only those firms who technically qualify as per the documents in Cover 1 will be opened. The format for Technical Bid is given in Annexure-I, while price bid format in given in Annexure-II (iii) The Cover I shall be addressed to "The Director, Indian Maritime University - Kolkata Campus" and should be duly superscribed as "Cover-I-Technical Bid for procurement of Instruments for Electrical Machine Laboratory at IMU-KC" and sealed properly. Name and Address of the bidder shall also be written/ printed on the cover. (iv) The Cover II shall be addressed to "The Director, Indian Maritime University - Kolkata Campus" and should be duly super scribed as "Cover-II-Price Bid for procurement of Instruments for Electrical Machine Laboratory at lmu-kc" and sealed properly. Name and Address of the bidder shall also be written! printed on the cover.

(v) Main Cover Both the "Cover I" and "Cover 11" shall be placed inside the main cover, which shall be a addressed to "The Director, Indian Maritime University - Kolkata Campus P-19, Taratala Road, Kolkata: 700088, West Bengal, India" and the main cover should be duly superscribed as "Tender for procurement of Instruments for Electrical Machine Laboratory at lmu-kc" and sealed properly. (vi) The rates quoted should be comprehensive and inclusive of all taxes, delivery charges, installation, commissioning and trail run. (vii) Last date of submission of quotation is 12.07.2017. (viii) The Equipment should be delivered and installed within the period of 4 weeks from the date of issue of Purchase Order. If the bidder fails to deliver and place any or all the Equipments or perform the service by the specified date, penalty at the rate of 1 % per week of the total order value subject to the maximum of 10% of total order value will be deducted. (ix) Delivery of the above items should be made at lmu - Kolkata Campus at P-19, Taratala Road, Kolkata 700 088. (x) Rates quoted should be valid for a period of 2 months from the last date of submission of the bids. Other than the increase in taxes imposed by statutory authority, no change in the rate is acceptable during the period. (xi) Conditional bids will not be accepted. (xii) (xiii) 100% Payment will be made through Bank Transfer after successful installation, delivery and trial run of the equipments. Minimum 3 years free service warranty should be given for the equipment/equipments. Calls should be attended within 24 hrs. in case of any break down. ~ O.I.e. - Purchase

To The Director Indian Maritime University - Kolkata Campus P-19 Taratala Road, Kolkata - 7000 88 Dear Sir, Having agreed to the terms and condition of the tender, we hereby submit our Technical Bid for "Procurement of Instruments for Electrical Machine Laboratory at IMU-KC" as detailed below Format of Technical Bid Annexure - I Procurement ofinstt'uments for Electrical Machine Laboratory at IMU-KC SI. Items Specifications Qty Unit No. 01 Determination of Digital voltmeter 3.5 digit, digital ammeter 3.5 digit. test zig to carry 01 Set equivalent the experiment smoother. active component to carry the experiment. resistance of the input 230v ac 50 Hz ±l Ov. dust proof close type box laminated with resistors when powder coating 70 microns. patch chord 2ml11 multi pole type and they are instruction manual. connected In Series, Parallel gauge CRC sheet, Powder coating, J.P. Protection. and Seriesparallel combinations. 02 Characteristics of All terminals of the meters etc. are brought out on BS-4 terminals for 01 Set Fluorescent lamps flexible connection. All meters, voltage source, networks are fitted I mount on Bakelite sheet which fitted on self stand, foot mounted, Table top, power coated MS sheet panel with required Armstrong's gauge CRC sheet, Powder coating, J.P. Protection. 03 Characteristics of Richardson Equations, Model ETB-198 01 Set Tungsten filament lamps gauge CRC sheet, Powder coating, I.P. Protection. 04 Verification of Verification of laws & Network theorem in DC circuits with power 01 Set Thevenin's supply and 2 meters (C.R.), theorem., Model ETB-064. Norton's Verification of superposition Theremins & reciprocity theorem with theorems, PIS and 4 digital meter (C.R), Maximum power Model ETB-20 I theorem and Superposition gauge CRC sheet, Powder coating, J.P. Protection. theorem 05 Study of R-L-C Series and Parallel Resonance ETB-030, A.C.Millivoltmeter, Model 01 Set Series and parallel ACV -25, Audio frequency generator 20 Hz to 200 KHz OIP 0-20V circuit RMS, model AO-300, A.F.Milliammeter 0-5 ma, Model AF-205MO, Study of resonance in LCR circuit & Damping Effect Model Es-215, Audio frequency generator 20 Hz to 200 KHz OIP 0-20VRMS,model AO-300. gauge CRC sheet, Powder coating, J.P. Protection.

06 Measurement of All terminals of the meters etc. are brought out on BS-4 terminals for 01 Set power in a three flexible connection. All meters, voltage source, networks are fitted / phase circuit by mount on Bakelite sheet which fitted on self stand, foot mounted, two watt meter Table top, power coated MS sheet panel with required Armstrong's method. gauge ere sheet, Powder coating, I.P. Protection. 07 Measurement of All terminals of the meters etc. are brought out on BS-4 terminals for 01 Set energy (single and flexible connection. All meters, voltage source, networks are fitted / 3 phase) using mount on Bakelite sheet which fitted on self stand, foot mounted, suitable energy Table top, power coated MS sheet panel with required Armstrong's meter 08 Measurement of Networks are fitted / mount on Bakelite sheet which fitted on self 01 Set the insulation stand, foot mounted, Table top, power coated MS sheet panel with resistance of a required Armstrong's electrical machine and continuity test by the megger 09 Measurement of All terminals of the meters etc. are brought out on BS-4 terminals for 0] Set energy (single and flexible connection. 3 phase) using All meters, voltage source, networks are fitted / mount on Bakelite suitable energy sheet which fitted on self stand, foot mounted, Table top, power coated meter MS sheet 10 Star-Delta Starter Open type Star-Delta circuit for 37kW motor. 01 Set for electrical machines gauge Ck.C sheet, Powder coating, l.p. Protection. Yours faithfully, Date Place: Signature with Seal of Authorized Signatory

To The Director Indian Maritime University - Kolkata Campus P-19 Taratala Road, Kolkata - 7000 88 Dear Sir, Having agreed to the terms and condition of the tender, we hereby submit our Financial Bid for "Procurement of Instruments for Electrical Machine Laboratory at IMU-KC" as detailed below Format of Price Bid Annexure-II Procurement ofinstruments for Electrical Machine Laboratory at IMU-KC SI. No. Items Specifications Qty Unit 01 Determination of Digital voltmeter 3.5 digit, digital ammeter 3.5 digit. test zig to carry 01 Set equivalent the experiment smoother. active component to carry the experiment. resistance of the input 230v ac 50 Hz ± I Ov. dust proof close type box laminated with resistors when powder coating 70 microns. patch chord 2mm multi pole type and they are instruction manual. connected 111 Series, Parallel gauge CRC sheet, Powder coating, LP. Protection. and Seriesparallel combinations. 02 Characteristics of All terminals of the meters etc. are brought out on BS-4 terminals for 01 Set Fluorescent lamps flexible connection. All meters, voltage source, networks are fitted I mount on Bakelite sheet which fitted on self stand, foot mounted, Table top, power coated MS sheet panel with required Armstrong's gauge CRC sheet, Powder coating, I.P. Protection. 03 Characteristics of Richardson Equations, Model ETB-198 01 Set Tungsten filament lamps gauge CRC sheet, Powder coating, LP. Protection. 04 Verification of Verification of laws & Network theorem in DC circuits with power 01 Set Thevenin's supply and 2 meters (C.R.), theorern., Model ETB-064. Notion's Verification of superposition Therernins & reciprocity theorem with theorems, PIS and 4 digital meter (C.R), Maximum power Model ETB-20 1 theorem and Superposition gauge CRC sheet, Powder coating, LP. Protection. theorem 05 Study of R-L-C Series and Parallel Resonance ETB-030, A.C.Millivoltmeter, Model 01 Set Series and parallel ACV-25, Audio frequency generator 20 Hz to 200 KHz OIP 0-20V circuit RMS, model AO-300, A.F.Milliammeter 0-5 ma, Model AF-205MO, Study of resonance in LCR circuit & Damping Effect Model Es-215, Audio frequency generator 20 Hz to 200 KHz alp 0-20VRMS,model AO-300. gauge CRC sheet, Powder coating, J.P. Protection.

06 Measurement of All terminals of the meters etc. are brought out on BS-4 terminals for 01 Set power in a three flexible connection. All meters, voltage source, networks are fitted / phase circuit by mount on Bakelite sheet which fitted on self stand, foot mounted, two watt meter Table top, power coated MS sheet panel with required Armstrong's method. 07 Measurement of All terminals of the meters etc. are brought out on BS-4 terminals for 01 Set energy (single and flexible connection. All meters, voltage source, networks are fitted / 3 phase) using mount on Bakelite sheet which fitted on self stand, foot mounted, suitable energy Table top, power coated MS sheet panel with required Armstrong's meter 08 Measurement of Networks are fitted / mount on Bakelite sheet which fitted on self 01 Set the insulation stand, foot mounted, Table top, power coated MS sheet panel with resistance of a required Armstrong's electrical machine and gauge ere sheet, Powder coating, I.P. Protection. continuity test by the megger 09 Measurement of All terminals of the meters etc. are brought out on BS-4 terminals for 01 Set energy (single and flexible connection. 3 phase) using All meters, voltage source, networks are fitted / mount on Bakelite suitable energy sheet which fitted on self stand, foot mounted, Table top, power coated meter MS sheet gauge Ck.C sheet, Powder coating, J.P. Protection. 10 Star-Delta Starter Open type Star-Delta circuit for 37kW motor. 01 Set for electrical machines gauge ere sheet, Powder coating, I.P. Protection. Yours faithfully, Date Place: Signature with Seal of Authorized Signatory