Advanced Test Equipment Rentals ATEC (2832)

Similar documents
Modular Smart Interfaces

Compact, Lightweight & Powerful Data Acquisition!

Module Input type Ranges TEDS Filters (LP = lowpass, HP = highpass) Piezoresistive bridge ±0.5 to mv/ma 1 ma exc

Isolated DIN Rail Mount Loop-Powered 2-Wire Signal Conditioners. DRLP Series

USB-2404-UI Specifications

Isolation (ISO), Special Overvoltage functions protection (OP) Voltage measurement PAD-V8-P 8 Voltage, up to ±50 V BW: 6 Hz ISO: 350 V DC

EX1000 Series EX1000A EX1000A-TC EX1016A EX1032A EX1048A EX10SC EX1000A-TCDC RELIABLE DATA FIRST TIME EVERY TIME.

Analog Isolation Amplifiers

Specifications. 744 Users Manual

DC MHZ PXI Differential Instrumentation Amplifier

Analog Isolation Amplifiers

DRG-SC Series Signal Conditioners

Isolated, Linearized Thermocouple Input 7B47 FEATURES APPLICATIONS PRODUCT OVERVIEW FUNCTIONAL BLOCK DIAGRAM

Isolated, Thermocouple Input 7B37 FEATURES APPLICATIONS PRODUCT OVERVIEW FUNCTIONAL BLOCK DIAGRAM

8248AU. 4-Ch Isolated Amplifier with Optional Bridge Conditioning FEATURES TYPICAL APPLICATIONS

Chapter 6 Specifications

Isolated, Linearized RTD Input 7B34 FEATURES APPLICATIONS PRODUCT OVERVIEW FUNCTIONAL BLOCK DIAGRAM

USB-TEMP and TC Series USB-Based Temperature Measurement Devices

imc CANSAS-L-HCI8. High isolated module for the capture of temperature, voltage, current (20 ma) and resistance

FC-33, DC SELECTABLE SIGNAL CONDITIONER

ADAM 4000/4100 Series

Oscilloscope Probes and Accessories

CONTA-ELECTRONICS. Converter Units

QUAD PROGRAMMABLE FILTER/AMPLIFIERS For the and Signal Conditioning Systems

Quadrupole Power Supply Unit QPS400-3

EPAD2/CPAD2/CPAD3 Modules. Modules with CAN or RS-485 Interface

Isolated High Level Voltage Output 7B22 FEATURES APPLICATIONS PRODUCT OVERVIEW FUNCTIONAL BLOCK DIAGRAM

Components Signal Conditioning For Your Computer Instruments Standard Models

SCXI 8-Channel Isolated Analog Input Modules

INPUT RESISTANCE OR CLAMP VOLTAGE. 2 Years 23 C ±5 Voltage mv 3 10 nv > 10 G

Model 140 Inline Amplifier

Isolated Linearized 4-Wire RTD Input 5B35 FEATURES APPLICATIONS PRODUCT OVERVIEW FUNCTIONAL BLOCK DIAGRAM

supplies and frequency converters. BumbleBee is also very effective in fast transient measurements

Temperature Transmitters - Head Mounted

User s Guide. 400A AC/DC Clamp Meter. Model MA Washington Street Melrose, MA Phone Toll Free

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

7051Plus / 5051Plus. Extended Specification

Temperature Transmitters - DIN Rail Mounted

EPAD2/CPAD2/CPAD3 Modules. Modules with CAN or RS-485 Interface

DS 6000 Specifications

TT-SI 9001 / TT-SI MHz Active Differential Probes

Precision 4mA to 20mA CURRENT LOOP RECEIVER

SINEAX V 624 Programmable Temperature Transmitter for RTD and TC inputs

Multimeter Selection Guide Fluke 8508A & Agilent 3458/HFL

TT-SI MHz DIFFERENTIAL PROBE

Loop calibration and maintenance

CALYS Transportable documenting multifunction calibrator with high accuracy 0.01%

Type Ordering Code Package TAA 762 A Q67000-A2271 P-DIP-6-1 TAA 762 G Q67000-A2273 P-DSO-6-1 (SMD) TAA 765 A Q67000-A524 P-DIP-6-1

8558A 8 1/2 Digit Multimeter

Precision 4mA to 20mA CURRENT LOOP RECEIVER

Datasheet. SDM3065X Digital Multimeter. Product Overview. Main Feature. Application fields. Main Function

Signal Conditioning Amplifier

DP2000 ORDERING GUIDE To Order MODEL NO.


Low Power INSTRUMENTATION AMPLIFIER

MODEL: M2XU MODEL: M2XU [1][2] [3][4]

Introduction to Analog Interfacing. ECE/CS 5780/6780: Embedded System Design. Various Op Amps. Ideal Op Amps

MODEL: M6SXU MODEL: M6SXU [1][2] [3][4]

SHIMADEN DIGITAL INDICATORS

SEM210 SERIES. Programmable In-head Universal Temperature Transmitter INDEX SECTION CONTENTS PAGE NO.

HZ530 Near-Field Probe Set

120 khz Bandwidth, Low Distortion, Isolation Amplifier AD215

Variable-Gain High Speed Current Amplifier

5500A. Multi-Product Calibrator. Extended Specifications 2005

Model 176 and 178 DC Amplifiers

Micropower, Single-Supply, Rail-to-Rail, Precision Instrumentation Amplifiers MAX4194 MAX4197

Let`s get SIRIUS! SIRIUS Overview. SIRIUS from Dewesoft. SIRIUS Overview. The new hardware generation makes your measurement more precise!

Differential Amplifier : input. resistance. Differential amplifiers are widely used in engineering instrumentation

MODEL: 20VS2-02. Hybrid IC Isolation Amplifiers 20 Series

CALYS 50. Field multifunction calibrator for basic use

AIO and DIO PFXLM4B01DAK:Sink Output Type PFXLM401DAC:Source Output Type Virtual Resolution (pixels)

ANALOG INPUT/OUTPUT MODULES SPECIFICATIONS* Input resistance. From ± 10 mveff to ± 50 Veff (see ranges) AC input ZIN = 100 KΩ

User s Guide. 400A AC/DC Clamp Meter. Model MA220

Precision, Low Power INSTRUMENTATION AMPLIFIERS

Assembly. Front view. Parametrization interface. Power Bus

PFXLM4B01 D * * (1) (2) (3) (4)

DSCL, DSCP, SCTP. Industrial Loop Isolators and Transmitters DSCL, DSCP, SCTP. Industrial Loop Isolators and Transmitters

PIE 525B. Automated Thermocouple & RTD Calibrator Operating Instructions. Practical Instrument Electronics

TT-SI MHz Active Differential Probe

Let`s get SIRIUS! SIRIUS Overview. SIRIUS from Dewesoft. SIRIUS Overview. The new hardware generation makes your measurement more precise!

Precision G = 100 INSTRUMENTATION AMPLIFIER

Dual operational amplifier

CALYS 100. Field precision documenting multifunction calibrator

Ethernet-Based Temperature, Voltage and Strain Measurement Modules

5520A. Multi-Product Calibrator. Extended Specifications 2005

Industrial Modbus I/O Modules

AD596/AD597 SPECIFICATIONS +60 C and V S = 10 V, Type J (AD596), Type K (AD597) Thermocouple,

Bipolar Output Working Standard

CALYS 75. Field documenting multifunction calibrator

FP-RTD-122. Features OPERATING INSTRUCTIONS. 8-Channel, 3-Wire RTD and Resistance Input Module

High Speed FET-Input INSTRUMENTATION AMPLIFIER

TT-SI MHz Active Differential Probe

Manual Supplement. This supplement contains information necessary to ensure the accuracy of the above manual.

PIE 525. Diagnostic Thermocouple RTD & Milliamp Calibrator Operating Instructions. Practical Instrument Electronics

MODEL: R30US4. Remote I/O R30 Series

Isolated, Linearized Thermocouple Input 5B47 FEATURES APPLICATIONS PRODUCT OVERVIEW

T3DMM6-5/T3DMM6-5-SC Data Sheet

SEFRAM DAS Sefram. Sefram. A new family of paperless recorders 6 to 72 channels, to cover all your applications

DIN Thermocouple Conditioner MODEL 5M14(V)

High Common-Mode Voltage Difference Amplifier AD629

Transcription:

Established 1981 Advanced Test Equipment Rentals www.atecorp.com 800-404-ATEC (2832) TEST & MEASUREMENT PRODUCT GROUP 600 East Greenwich Avenue West Warwick, RI 02893 Phone: 401-828-4000 Fax: 401-822-2430 toll-free phone: 877-867-9783 e-mail: mtgroup@astromed.com Dash 8Xe and AstroDAQ Xe Module Specifications (Updated December, 2005) NDV1 Differential, non-isolated input module Guarded banana jacks (red/black) No (5V Attenuator) 28 KHz (-3db) (40V Attenuator) 34 KHz (-3db) Differential, DC coupled Off Ground Measurements Yes Yes, digital. Measurement Ranges +/- 5 V (5 VFS or 10 VFS w/ zero offset) +/- 40 V (40 VFS or 80 VFS w/ zero offset) Max Rated +/- 40 V Max Transient +/- 40 V 14 bit SAR 0.25 % of attenuator (12.5 mv and 100 mv) Less than 0.5% of attenuator Overshoot Less than 1% of attenuator Intrinsic Noise (pk-pk) < 0.1 % of attenuator Min Impedance 425 K CMR at 60 Hz Better than -60 db Frequency Counter No Module Part Number 32750-000 1.

IHV1 Isolated high voltage module Guarded banana jacks (red/black) 250 VRMS or DC, Cat II. (iso-common to chassis and other iso-commons) (100V attenuator) 39 KHz (-3db) (other attenuators)40 KHz (-3db) Single-ended, DC coupled Yes, digital. Measurement Ranges +/- 400 V (400 VFS or 800 VFS w/ zero offset) +/- 200 V (200 VFS or 400 VFS w/ zero offset) +/- 100 V (100 VFS or 200 VFS w/ zero offset) +/- 50 V (50 VFS or 100 VFS w/ zero offset) +/- 40 V (40 VFS or 80 VFS w/ zero offset) +/- 20 V (20 VFS or 40 VFS w/ zero offset) +/- 10 V (10 VFS or 20 VFS w/ zero offset) +/- 5 V (5 VFS or 10 VFS w/ zero offset) Max Rated +/- 250 Vrms or DC Max Transient +/- 800 V (not to exceed 250 Vrms) +/- 0.15% of Attenuator Less than 0.2% of attenuator Overshoot Less than 2% of attenuator Intrinsic Noise (pk-pk) < 0.1 % of Attenuator Min Impedance 1 Mohm IMR at 60 Hz > 75 db Frequency Counter Yes. Software selectable. Module Part Number 32750-010 2.

IBR1 Isolated differential/ bridge amplifier with DC excitation 5 wire screw terminal 250 VRMS or DC, Cat II (iso-common to chassis and other iso-commons) 40 KHz (-3db) Differential, DC coupled Yes, digital Absolute Max +/- 12 V (either input referenced to iso-common) Measurement Ranges +/- 2 V +/- 200 mv +/- 50 mv +/- 20 mv Max Transient 60 V +/- 0.15 % of attenuator Less than 0.2% of attenuator Overshoot Less than 2% of attenuator Intrinsic Noise (pk-pk) < 0.1 % of attenuator (2V, 200 mv Attenuators) < 0.2 % of attenuator (50 mv Attenuator) < 0.2 % of attenuator (20 mv Attenuator) Min Impedance 250 K (balanced to signal common) CMR at 60 Hz > 90 db Excitation DC adjustable to 10 V @ 30 ma Excitation Range 0.1 to 10.0 V Excitation Accuracy 0.05 V Auto Balance yes (limited by maximum span) Frequency Counter Yes. Software selectable. Bridge Completion Resistors: Yes, internal. Includes location for 3-wire ¼ bridge. Module Part Number 32750-020 3.

IHV2 Isolated very high voltage module Guarded Banana Jacks 600 VRMS or DC Cat II (either input to chassis and across inputs) 300 VRMS or DC Cat III 34 KHz (-3db) Type Isolated differential, balanced to internal common. Coupling DC Yes, digital. Measurement Ranges +/- 1000 V +/- 800 V +/- 400 V +/- 200 V +/- 100 V Max Rated 600 Vrms or DC Max Transient +/- 1000 V (not to exceed 600 Vrms) +/- 0.15% Attenuator Less than 0.2% of attenuator Overshoot Less than 1% of attenuator Intrinsic Noise (pk-pk) < 0.15 % Attenuator Min Impedance 4M (differential) IMR > 70 db @ 60 Hz Frequency Counter Yes. Software selectable. Module Part Number 32750-030 4.

IRTD Isolated RTD amplifier for Pt 100 Resistance Temperature Detectors 4 wire screw terminal Yes 2.5 Hz update rate Absolute Max +/- 10V Measurement Ranges: Pt100(385) -200 to 800 C Pt100(3916) -200 to 630 C (-200 to 800 on menu) Pt100(3926) -200 to 630 C (-200 to 800 on menu) resistance 0 to 400 Ω (0 to 450 Ω on menu) Minimum full scale 10 C 24 bit Sigma Delta Inherent Resolution 0.01 C 0.05% of measurement + 0.2 C Accuracy (resistance 25 C) 0.02% of measurement + 0.05 Ω < 0.3º C Intrinsic Noise (pk-pk) < 0.03 C Intrinsic Noise (resistance) < 0.01 Ω Linearization yes Supported RTD Probe types Pt 100-385 (DIN 43760, IEC751 and ASTM 1137) Pt 100-3916 (JIS C1604) Pt 100-3926 (reference grade) Excitation 1 ma constant current (+/- 4%) Frequency Counter No Module Part Number 32750-040 5.

ITCU Universal thermocouple amplifier Type U miniature thermocouple 250 VRMS or DC, Cat II. 5 Hz update rate Absolute Max +/- 10V Specified Range Type J: -210 to 1200 C Specified Range Type K: -200 to 1372 C Specified Range Type E: -200 to 1000 C Specified Range Type T: -200 to 400 C Specified Range Type N: -200 to 1300 C Specified Range Type B: 600 to 1820 C (250 to 1820 on menu) Specified Range Type R: -20 to 1768 C Specified Range Type S: -20 to 1768 C 24 bit Sigma Delta Inherent Resolution 0.01 C Thermocouple types J,K,E,T,N,B,R,S J +/- 0.8 C K +/- 1.0 C E +/- 0.8 C T (-100 to 400) +/- 1.0 C T (-200 to -100) +/- 2.0 C N +/- 0.8 C B +/- 2.0 C R +/- 2.0 C S +/- 2.0 C 100 mv +/- 0.01% of attenuator Cold Junction Compensation Yes Compensation Error included in above accuracy specification Intrinsic Noise (pk-pk, J,K,E,T,N) < 0.07 C Intrinsic Noise (pk-pk, B,R,S) < 0.5 C Intrinsic Noise (pk-pk, 100 mv) < 0.005 % of attenuator IMR > 110 db @ DC Linearization NIST ITS-90 Frequency Counter No Module Part Number 32750-090 Note: Specified accuracy does not include probe errors. 6.

LIVM Low impedance voltage module with DC current excitation Yes, 250 Vrms or DC to chassis common. * Isolated BNC 6 Hz to 30 KHz (-3db) AC coupled transducers with integral electronics Coupling Time Constant 300 ms (+/- 20%) N/A Absolute Max +/- 40V Measurement Ranges +/- 5000 mv +/- 500 mv +/- 200 mv +/- 50 mv Max Transient 60 V Accuracy LIVM mode (25 C) 2 % of attenuator Accuracy Diff mode (25 C) 0.15 % of attenuator Less than 2% of attenuator Intrinsic Noise - 50 mv atten.2% of attenuator (pk-pk) Intrinsic Noise - other attens..1% of attenuator (pk-pk) Min Impedance 25 KΩ (differential) IMR at 60 Hz - 5000 mv att 80 db IMR at 60 Hz - other attens. 90 db Excitation 4 ma DC current Excitation Accuracy 20% (25 ºC) Excitation Compliance Volt. 18V (23V open circuit voltage) Excitation Protection Short Circuit Protected Module Part Number 32750-070 * limited to 30 Vrms or 60V DC when non-insulated mating BNC connector used since hazardous voltage would otherwise be accessible. 7.

IDCV Isolated high accuracy, wide dynamic range DC voltmeter Guarded banana jacks (red/black) 250 VRMS or DC, Cat II. (iso-common to chassis and other iso-commons) Type Single-ended, Isolated Coupling DC Minimum Impedance > 1 MΩ Yes, digital. 6 Hz update rate (.65 Hz 3dB point typical) Max Rated - 5 V to +130V Max Transient +/- 250 V 24 bit Sigma Delta Inherent +/- 55 ppm of reading +.7 mv Intrinsic Noise (pk-pk) < 1.0 mv (.7 mv typ) IMR (DC) > 110 db Module Part Number 32750-110 8.

Measurement Ranges Max Rated Max Transient Intrinsic Noise (pk-pk) IHV3 High voltage module Guarded banana jacks (red/black) 250 VRMS or DC, Cat II. (iso-common to chassis and other iso-commons) 22 KHz (-3db) (350 through 40 V Atts) 20 KHz (-3db) (20 V Att) 17 KHz (-3db) (10000 through 500 mv Atts) 12 KHz (-3db) (100 through 50 mv Atts) Single-ended, DC coupled Yes. digital +/- 350 V +/- 200 V +/- 100 V +/- 50 V +/- 40 V +/- 20 V +/- 10000 mv +/- 5000 mv +/- 1000 mv +/- 500 mv +/- 100 mv +/- 50 mv +/- 250 Vrms or DC +/- 800 V (not to exceed 250 Vrms) +/- 0.15% of Attenuator Less than 0.5% of attenuator < 0.2 % of Attenuator (Volt Attenuators) < 0.2 % of Attenuator + 2 mv (mv Attenuators) 1 M ohm > 50 db Min Impedance IMR at 60 Hz (Volt Attens.) IMR at 60 Hz (mvolt Attens) > 60 db Frequency Counter Yes. Software selectable. Module Part Number 32750-130 9.