MJL428A (NPN) MJL42A (PNP) Preferred Device Complementary NPNPNP Silicon Power Bipolar Transistors The MJL428A and MJL42A are PowerBase power transistors for high power audio. Features 3 V CollectorEmitter Sustaining Voltage Gain Complementary: Gain Linearity from ma to 5 A High Gain to 24 h FE = (min) @ I C = 8 A Low Harmonic Distortion High Safe Operation Area. A/ V @ Second High f T PbFree Packages are Available* MAXIMUM RATINGS ( unless otherwise noted) Rating Symbol Value Unit CollectorEmitter Voltage V CEO 3 CollectorBase Voltage V CBO 3 EmitterBase Voltage V EBO 5. CollectorEmitter Voltage.5 V V CEX 3 Collector Current Continuous Collector Current Peak (Note ) I C 5 Adc 2 3 5 AMPERES COMPLEMENTARY SILICON POWER TRANSISTORS 3 VOLTS, 2 WATTS TO264 CASE 34G STYLE 2 MARKING DIAGRAM MJL4xxxA AYYWWG Base Current Continuous I B.5 Adc Total Power Dissipation @ T C = 25 C Derate Above 25 C P D 2.84 W C/W BASE 3 EMITTER 2 COLLECTOR Operating and Storage Junction Temperature Range THERMAL CHARACTERISTICS T J, T stg 65 to + C Characteristic Symbol Max Unit Thermal Resistance, JunctiontoCase R JC.54 C/W Maximum ratings are those values beyond which device damage can occur. Maximum ratings applied to the device are individual stress limit values (not normal operating conditions) and are not valid simultaneously. If these limits are exceeded, device functional operation is not implied, damage may occur and reliability may be affected.. Pulse Test: Pulse Width = 5 ms, Duty Cycle < %. *For additional information on our PbFree strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. ORDERING INFORMATION Device Package Shipping MJL428A MJL428AG xxx = 28 or 2 A = Assembly Location YY = Year WW = Work Week G = PbFree Package TO264 MJL42A TO264 MJL42AG TO264 (PbFree) TO264 (PbFree) Preferred devices are recommended choices for future use and best overall value. Semiconductor Components Industries, LLC, 26 January, 26 Rev. 2 Publication Order Number: MJL428A/D
MJL428A (NPN) MJL42A (PNP) ELECTRICAL CHARACTERISTICS (T C = 25 C unless otherwise noted) Characteristic Symbol Min Max Unit OFF CHARACTERISTICS Collector Emitter Sustaining Voltage (I C = ma, I B = ) V CE(sus) 3 Collector Cutoff Current (V CE = 2 V, I B = ) I CEO Adc Collector Cutoff Current (V CB = 3, I E = ) Emitter Cutoff Current (V EB = 5., I C = ) I CBO I EBO 5. Adc Adc SECOND BREAKDOWN Second Breakdown Collector with Base Forward Biased (V CE =, t =. s (nonrepetitive) (V CE =, t =. s (nonrepetitive) I S/b 4.5. Adc ON CHARACTERISTICS DC Current Gain (I C = madc, V CE = 5. ) (I C =. Adc, V CE = 5. ) (I C = 3. Adc, V CE = 5. ) (I C = 5. Adc, V CE = 5. ) (I C = 8. Adc, V CE = 5. ) (I C = 5 Adc, V CE = 5. ) CollectorEmitter Saturation Voltage (I C = 8. Adc, I B =.8 Adc) EmitterBase Saturation Voltage (I C = 8. Adc, I B =.8 A) BaseEmitter ON Voltage (I C = 8. Adc, V CE = 5. ) DYNAMIC CHARACTERISTICS CurrentGain Bandwidth Product (I C =. Adc, V CE = 5., f test =. MHz) Output Capacitance (V CB =, I E =, f test =. MHz) h FE V CE(sat). V BE(sat).4 V BE(on).5 f T 35 C ob 6 MHz pf 2
MJL428A (NPN) MJL42A (PNP) TYPICAL CHARACTERISTICS T J = C T J = C. Figure. DC Current Gain, V CE = 5 V,. Figure 2. DC Current Gain, V CE = 5 V, T J = C T J = C. Figure 3. DC Current Gain, V CE = 2 V,. Figure 4. DC Current Gain, V CE = 2 V, SATURATION VOLTAGE (V).4.2.8.6.4 V be(sat).2 V ce(sat) I c /I b =. Figure 5. Typical Saturation Voltage, SATURATION VOLTAGE (V) 2..8.6.4.2..8.6 V be(sat).4.2 V ce(sat) I c /I b =. Figure 6. Typical Saturation Voltage, 3
MJL428A (NPN) MJL42A (PNP).4 TYPICAL CHARACTERISTICS 2.5 V BE(on), BASEEMITTER VOLTAGE (V).2..8.6.4.2. Figure 7. Typical BaseEmitter Voltages, V BE(on), BASEEMITTER VOLTAGE (V) 2..5..5. Figure 8. Typical BaseEmitter Voltages, ft, CURRENT BANDWIDTH PRODUCT (MHz) 7 6 4 2 f test = MHz V CE = 5 V V CE = V. ft, CURRENT BANDWIDTH PRODUCT (MHz) 7 6 4 2 f test = MHz V CE = 5 V V CE = V. Figure 9. Typical Current Gain Bandwidth Product, Figure. Typical Current Gain Bandwidth Product,. Sec ms ms V ce, COLLECTOREMITTER VOLTAGE (V) Figure. Active Region Safe Operating Area,. Sec ms ms V ce, COLLECTOREMITTER VOLTAGE (V) Figure 2. Active Region Safe Operating Area, 4
MJL428A (NPN) MJL42A (PNP) PACKAGE DIMENSIONS TO3BPL (TO264) CASE 34G2 ISSUE J R N F 2 PL Q.25 () M T B M B U A 2 3 L P K W G J D 3 PL H.25 () M T B S C T E NOTES:. DIMENSIONING AND TOLERANCING PER ANSI Y4.5M, 982. 2. CONTROLLING DIMENSION: MILLIMETER. MILLIMETERS INCHES DIM MIN MAX MIN MAX A 28. 29..2.42 B 9.3 2.3.76 C 4.7 5.3.85.29 D.93.48 37 58 E.9 2. 75 83 F 2.2 2.4 87.2 G 5.45 BSC.25 BSC H 2.6 3..2.8 J.43.78 7 3 K 7.6 8.8.693.74 L.2 REF.4 REF N 4.35 REF.72 REF P 2.2 2.6 87.2 Q 3. 3.5.22.37 R 2.25 REF 89 REF U 6.3 REF.248 REF W 2.8 3.2..25 STYLE 2: PIN. BASE 2. COLLECTOR 3. EMITTER PowerBase is a trademark of Semiconductor Components Industries, LLC. ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Typical parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including Typicals must be validated for each customer application by customer s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 632, Phoenix, Arizona 88232 USA Phone: 482977 or 344386 Toll Free USA/Canada Fax: 4829779 or 3443867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 2829855 Toll Free USA/Canada Japan: ON Semiconductor, Japan Customer Focus Center 29 Kamimeguro, Meguroku, Tokyo, Japan 55 Phone: 83577338 5 ON Semiconductor Website: Order Literature: http://www.onsemi.com/litorder For additional information, please contact your local Sales Representative. MJL428A/D