CERTIFICATE. Issued Date: Apr. 02, 2009 Report No.: R-ITUSP01V01

CERTIFICATE Issued Date: Apr. 02, 2009 Report No.: 093337R-ITUSP01V01 This is to certify that the following designated product Product : 2G 8/16PORT Serial Device Server Trade name : Moxa Model Number : CN2510-8, CN2510-16, CN2610-8 CN2610-16, NPort 5650-8, NPort 5650-16 NPort 5650-8-S-SC, NPort 5650-16-S-SC NPort 5650-8-M-SC, NPort 5650-16-M-SC NPort 5610-8,NPort 5610-16,NPort 5610-8-48V NPort 5610-16-48V,NPort 5630-8,NPort 5630-16 Company Name : Moxa Inc. This product, which has been issued the test report listed as above in QuieTek Laboratory, is based on a single evaluation of one sample and confirmed to comply with the requirements of the following EMC standard. FCC CFR Title 47 Part 15 Subpart B: 2007 Class A, CISPR 22: 2005 ANSI C63.4: 2003 TEST LABORATORY Vincent Lin / Manager No.5-22, Ruei-Shu Valley, Ruei-Ping Tsuen Lin Kou Shiang, Taipei 244 Taiwan, R.O.C. TEL:+886-2-8601-3788 FAX:+886-2-8601-3789 Email:service@quietek.com http://www.quietek.com

Test Report Product Name : 2G 8/16PORT Serial Device Server Model No. : CN2510-8, CN2510-16, CN2610-8 CN2610-16, NPort 5650-8, NPort 5650-16 NPort 5650-8-S-SC, NPort 5650-16-S-SC NPort 5650-8-M-SC, NPort 5650-16-M-SC NPort 5610-8,NPort 5610-16,NPort 5610-8-48V NPort 5610-16-48V,NPort 5630-8,NPort 5630-16 Applicant : Moxa Inc. Address : F1.4, No. 135, Lane 235, Pao-Chiao Rd., Shing Tien City, Taipei, Taiwan, R.O.C. Date of Receipt : 2009/03/23 Issued Date : 2009/04/02 Report No. : 093337R-ITUSP01V01 Report Version : V3.0 The test results relate only to the samples tested. The test results shown in the test report are traceable to the national/international standard through the calibration of the equipment and evaluated measurement uncertainty herein. This report must not be used to claim product endorsement by TAF, NVLAP, NIST or any agency of the Government. The test report shall not be reproduced except in full without the written approval of QuieTek Corporation.

Test Report Certification Issued Date : 2009/04/02 Report No. : 093337R-ITUSP01V01 Product Name : 2G 8/16PORT Serial Device Server Applicant : Moxa Inc. Address : F1.4, No. 135, Lane 235, Pao-Chiao Rd., Shing Tien City, Taipei, Taiwan, R.O.C. Manufacturer : Moxa Inc. Model No. : CN2510-8, CN2510-16, CN2610-8 CN2610-16, NPort 5650-8, NPort 5650-16 NPort 5650-8-S-SC, NPort 5650-16-S-SC NPort 5650-8-M-SC, NPort 5650-16-M-SC NPort 5610-8,NPort 5610-16,NPort 5610-8-48V NPort 5610-16-48V,NPort 5630-8,NPort 5630-16 Rated Voltage : AC 120 V / 60 Hz EUT Voltage : AC 100~240V 47-63Hz Trade Name : Moxa Applicable Standard : FCC CFR Title 47 Part 15 Subpart B: 2007 Class A CISPR 22: 2005 ANSI C63.4: 2003 Test Result : Complied Performed Location : Quietek Corporation (Linkou Laboratory) No.5-22,Ruei-Shu Valley, Ruei-Ping Tsuen Lin Kuo Shiang, Taipei, 244 Taiwan, R.O.C. TEL:+866-2-8601-3788 / FAX:+886-2-8601-3789 Documented By : (Adm. Specialist /Joanne Lin) Reviewed By : ( Engineer / Elvis Su ) Approved By : ( Manager / Vincent Lin ) Page: 2 of 49

Laboratory Information We, QuieTek Corporation, are an independent EMC and safety consultancy that was established the whole facility in our laboratories. The test facility has been accredited/accepted (audited or listed) by the following related bodies in compliance with ISO 17025, EN 45001 and specified testing scopes: Taiwan R.O.C. : BSMI, NCC, TAF Germany : TUV Rheinland Norway : Nemko, DNV USA : FCC, NVLAP Japan : VCCI The related certificate for our laboratories about the test site and management system can be downloaded from QuieTek Corporation s Web Site :http://tw.quietek.com/modules/enterprise/services.php?item=100 The address and introduction of QuieTek Corporation s laboratories can be founded in our Web site : http://www.quietek.com/ If you have any comments, Please don t hesitate to contact us. Our contact information is as below: HsinChu Testing Laboratory : No.75-2, 3rd Lin, Wangye Keng, Yonghxing Tsuen, Qionglin Shiang, Hsinchu County 307, Taiwan, R.O.C. TEL:+886-3-592-8858 / FAX:+886-3-592-8859 E-Mail : service@quietek.com LinKou Testing Laboratory : No. 5, Ruei-Shu Valley, Ruei-Ping Tsuen, Lin-Kou Shiang, Taipei, Taiwan, R.O.C. TEL : 886-2-8601-3788 / FAX : 886-2-8601-3789 E-Mail : service@quietek.com Suzhou (China) Testing Laboratory : No. 99 Hongye Rd., Suzhou Industrial Park Loufeng Hi-Tech Development Zone., Suzhou,China. TEL : +86-512-6251-5088 / FAX : +86-512-6251-5098 E-Mail : service@quietek.com Page: 3 of 49

TABLE OF CONTENTS Description Page 1. General Information... 5 1.1. EUT Description... 5 1.2. Mode of Operation... 6 1.3. Tested System Details... 7 1.4. Configuration of Tested System... 8 1.5. EUT Exercise Software... 10 2. Technical Test... 11 2.1. Summary of Test Result... 11 2.2. List of Test Equipment... 12 2.3. Measurement Uncertainty... 13 2.4. Test Environment... 14 3. Conducted Emission... 15 3.1. Test Specification... 15 3.2. Test Setup... 15 3.3. Limit... 15 3.4. Test Procedure... 16 3.5. Test Result... 17 3.6. Test Photograph... 29 4. Radiated Emission... 31 4.1. Test Specification... 31 4.2. Test Setup... 31 4.3. Limit... 32 4.4. Test Procedure... 33 4.5. Test Result... 34 4.6. Test Photograph... 42 5. Attachment... 45 EUT Photograph... 45 Page: 4 of 49

1. General Information 1.1. EUT Description Product Name Trade Name Model No. 2G 8/16PORT Serial Device Server Moxa CN2510-8, CN2510-16, CN2610-8 CN2610-16, NPort 5650-8, NPort 5650-16 NPort 5650-8-S-SC, NPort 5650-16-S-SC NPort 5650-8-M-SC, NPort 5650-16-M-SC NPort 5610-8,NPort 5610-16,NPort 5610-8-48V NPort 5610-16-48V,NPort 5630-8,NPort 5630-16 Component Fiber Cable Non-Shielded, 1.1m Note: The different of each model is shown as below: Model Number NPort 5610-8,NPort 5610-16,NPort 5610-8-48V, NPort 5610-16-48V NPort 5630-8,NPort 5630-16 NPort 5650-8, NPort 5650-16, NPort 5650-8-S-SC, NPort 5650-16-S-SC, NPort 5650-8-M-SC, NPort 5650-16-M-SC Description RS-232 Type RS-422 or RS-485 port Type RS-232, RS-422 or RS-485 Type Model Number Serial Port Number Ethernet Port Number CN2510-8 8 1 CN2510-16 16 1 CN2610-8 8 2 CN2610-16 16 2 Page: 5 of 49

1.2. Mode of Operation QuieTek has verified the construction and function in typical operation. All the test modes were carried out with the EUT in normal operation, which was shown in this test report and defined as: Pre-Test Mode Mode 1: Normal Operation (CN2610-16) Mode 2: Normal Operation (NPort 5650-16-M-SC) Final Test Mode Mode 1: Normal Operation (CN2610-16) Emission Mode 2: Normal Operation (NPort 5650-16-M-SC) Page: 6 of 49

1.3. Tested System Details The types for all equipments, plus descriptions of all cables used in the tested system (including inserted cards) are: Test Mode Mode 1 Product Manufacturer Model No. Serial No. Power Cord 1 Notebook PC DELL PP04X C8YYM1S Non-Shielded, 1.8m Test Mode Mode 2 Product Manufacturer Model No. Serial No. Power Cord 1 NPort S8455I-MM-SC Moxa NPort S8455I-MM-SC N/A Non-Shielded, 1.8m 2 Notebook PC DELL PP04X C8YYM1S Non-Shielded, 1.8m Page: 7 of 49

1.4. Configuration of Tested System Test Mode Mode 1 Connection Diagram Signal Cable Type Signal cable Description A LAN Cable Non-Shielded, 7m Page: 8 of 49

Test Mode Mode 2 Connection Diagram Signal Cable Type Signal cable Description A Fiber Cable Non-Shielded, 1.1m B LAN Cable Non-Shielded, 7m Page: 9 of 49

1.5. EUT Exercise Software 1 Setup the EUT and simulators as shown on 1.4. 2 Turn on the power of all equipment. 3 A mufti meter was used to verify the model operation before the measurement. Page: 10 of 49

2. Technical Test 2.1. Summary of Test Result No deviations from the test standards Deviations from the test standards as below description: Emission Performed Item Normative References Test Performed Deviation Conducted Emission FCC CFR Title 47 Part 15 Subpart B: 2007 Class A Yes No ANSI C63.4: 2003 Radiated Emission FCC CFR Title 47 Part 15 Subpart B: 2007 Class A Yes No ANSI C63.4: 2003 Page: 11 of 49

2.2. List of Test Equipment Conducted Emission / SR1 Instrument Manufacturer Type No. Serial No Cal. Date EMI Test Receiver R&S ESCS 30 100366 2008/10/18 LISN R&S ENV4200 833209/007 2008/08/12 LISN R&S ENV216 100085 2009/02/14 Pulse Limiter R&S ESH3-Z2 357.88.10.52 2008/09/04 Radiated Emission / Site3 Instrument Manufacturer Type No. Serial No Cal. Date Bilog Antenna Schaffner Chase CBL6112B 2704 2008/09/15 Broadband Horn Antenna Schwarzbeck BBHA9170 208 2008/07/25 EMI Test Receiver R&S ESCS 30 838251/001 2008/03/22 Horn Antenna Schwarzbeck BBHA9120D 305 2008/08/10 Pre-Amplifier QTK N/A N/A 2009/01/03 Spectrum Analyzer Advantest R3162 101102468 2008/10/24 EMI Test Receiver R&S ESI 26 838786/004 2008/05/25 Pre-Amplifier MITEQ QMF-4D-18040 0-45-6P 925974 2009/01/03 Page: 12 of 49

2.3. Measurement Uncertainty Conducted Emission The measurement uncertainty is evaluated as ± 2.26 db. Radiated Emission The measurement uncertainty is evaluated as ± 3.19 db. Page: 13 of 49

2.4. Test Environment Performed Item Items Required Actual Temperature ( C) 15-35 25 Conducted Emission Humidity (%RH) 25-75 50 Barometric pressure (mbar) 860-1060 950-1000 Temperature ( C) 15-35 25 Radiated Emission Humidity (%RH) 25-75 50 Barometric pressure (mbar) 860-1060 950-1000 Page: 14 of 49

3. Conducted Emission 3.1. Test Specification According to Standard : FCC Part 15 Subpart B, ANSI C63.4 3.2. Test Setup 3.3. Limit Limits Frequency (MHz) QP AV 0.15-0.50 79 66 0.50-5.0 73 60 5.0-30 73 60 Remarks: In the above table, the tighter limit applies at the band edges. Page: 15 of 49

3.4. Test Procedure The EUT and simulators are connected to the main power through a line impedance stabilization network (L.I.S.N.). This provides a 50 ohm /50uH coupling impedance for the measuring equipment. The peripheral devices are also connected to the main power through a LISN that provides a 50ohm/50uH coupling impedance with 50ohm termination. (Please refers to the block diagram of the test setup and photographs.) Both sides of A.C. line are checked for maximum conducted interference. In order to find the maximum emission, the relative positions of equipment and all of the interface cables must be changed on conducted measurement. Conducted emissions were invested over the frequency range from 0.15MHz to 30MHz using a receiver bandwidth of 9kHz. Page: 16 of 49

3.5. Test Result Site : SR-1 Time : 2009/03/30-09:45 Limit : CISPR_A_00M_QP Margin : 10 EUT : 2G 8/16PORT Serial Device Server Probe : ENV-216-L1 - Line1 Power : AC 120V/60Hz Note : Mode 1 Page: 17 of 49

Site : SR-1 Time : 2009/03/30-09:46 Limit : CISPR_A_00M_QP Margin : 0 EUT : 2G 8/16PORT Serial Device Server Probe : ENV-216-L1 - Line1 Power : AC 120V/60Hz Note : Mode 1 Frequency Correct Factor Reading Level Measure Level Margin Limit Detector Type (MHz) 1 * 0.189 9.820 33.650 43.470-35.530 79.000 QUASIPEAK 2 0.334 9.830 22.040 31.870-47.130 79.000 QUASIPEAK 3 0.763 9.830 13.920 23.750-49.250 73.000 QUASIPEAK 4 2.545 9.850 12.170 22.020-50.980 73.000 QUASIPEAK 5 4.154 9.860 23.880 33.740-39.260 73.000 QUASIPEAK 6 17.693 10.190 24.300 34.490-38.510 73.000 QUASIPEAK Note: 1. All Reading Levels are Quasi-Peak and average value. 2. " * ", means this data is the worst emission level. 3. Measurement Level = Reading Level + Correct Factor Page: 18 of 49

Site : SR-1 Time : 2009/03/30-09:46 Limit : CISPR_A_00M_AV Margin : 0 EUT : 2G 8/16PORT Serial Device Server Probe : ENV-216-L1 - Line1 Power : AC 120V/60Hz Note : Mode 1 Frequency Correct Factor Reading Level Measure Level Margin Limit Detector Type (MHz) 1 0.189 9.820 22.330 32.150-33.850 66.000 AVERAGE 2 0.334 9.830 16.220 26.050-39.950 66.000 AVERAGE 3 0.763 9.830 8.120 17.950-42.050 60.000 AVERAGE 4 2.545 9.850 3.480 13.330-46.670 60.000 AVERAGE 5 4.154 9.860 13.720 23.580-36.420 60.000 AVERAGE 6 * 17.693 10.190 21.650 31.840-28.160 60.000 AVERAGE Note: 1. All Reading Levels are Quasi-Peak and average value. 2. " * ", means this data is the worst emission level. 3. Measurement Level = Reading Level + Correct Factor Page: 19 of 49

Site : SR-1 Time : 2009/03/30-09:46 Limit : CISPR_A_00M_QP Margin : 10 EUT : 2G 8/16PORT Serial Device Server Probe : ENV-216-N - Line2 Power : AC 120V/60Hz Note : Mode 1 Page: 20 of 49

Site : SR-1 Time : 2009/03/30-09:46 Limit : CISPR_A_00M_QP Margin : 0 EUT : 2G 8/16PORT Serial Device Server Probe : ENV-216-N - Line2 Power : AC 120V/60Hz Note : Mode 1 Frequency Correct Factor Reading Level Measure Level Margin Limit Detector Type (MHz) 1 0.193 9.860 30.080 39.940-39.060 79.000 QUASIPEAK 2 0.283 9.850 25.260 35.110-43.890 79.000 QUASIPEAK 3 0.713 9.830 18.180 28.010-44.990 73.000 QUASIPEAK 4 2.548 9.850 13.490 23.340-49.660 73.000 QUASIPEAK 5 * 4.396 9.870 26.340 36.210-36.790 73.000 QUASIPEAK 6 18.244 10.220 25.540 35.760-37.240 73.000 QUASIPEAK Note: 1. All Reading Levels are Quasi-Peak and average value. 2. " * ", means this data is the worst emission level. 3. Measurement Level = Reading Level + Correct Factor Page: 21 of 49

Site : SR-1 Time : 2009/03/30-09:46 Limit : CISPR_A_00M_AV Margin : 0 EUT : 2G 8/16PORT Serial Device Server Probe : ENV-216-N - Line2 Power : AC 120V/60Hz Note : Mode 1 Frequency Correct Factor Reading Level Measure Level Margin Limit Detector Type (MHz) 1 0.193 9.860 17.800 27.660-38.340 66.000 AVERAGE 2 0.283 9.850 15.790 25.640-40.360 66.000 AVERAGE 3 0.713 9.830 11.190 21.020-38.980 60.000 AVERAGE 4 2.548 9.850 5.880 15.730-44.270 60.000 AVERAGE 5 4.396 9.870 16.800 26.670-33.330 60.000 AVERAGE 6 * 18.244 10.220 22.950 33.170-26.830 60.000 AVERAGE Note: 1. All Reading Levels are Quasi-Peak and average value. 2. " * ", means this data is the worst emission level. 3. Measurement Level = Reading Level + Correct Factor Page: 22 of 49

Site : SR-1 Time : 2009/03/30-09:38 Limit : CISPR_A_00M_QP Margin : 10 EUT : 2G 8/16PORT Serial Device Server Probe : ENV-216-L1 - Line1 Power : AC 120V/60Hz Note : Mode 2 Page: 23 of 49

Site : SR-1 Time : 2009/03/30-09:39 Limit : CISPR_A_00M_QP Margin : 0 EUT : 2G 8/16PORT Serial Device Server Probe : ENV-216-L1 - Line1 Power : AC 120V/60Hz Note : Mode 2 Frequency Correct Factor Reading Level Measure Level Margin Limit Detector Type (MHz) 1 0.209 9.827 33.570 43.397-35.603 79.000 QUASIPEAK 2 0.349 9.827 27.610 37.437-41.563 79.000 QUASIPEAK 3 1.127 9.830 27.050 36.880-36.120 73.000 QUASIPEAK 4 2.322 9.850 32.910 42.760-30.240 73.000 QUASIPEAK 5 4.502 9.870 27.050 36.920-36.080 73.000 QUASIPEAK 6 * 19.891 10.210 40.260 50.470-22.530 73.000 QUASIPEAK Note: 1. All Reading Levels are Quasi-Peak and average value. 2. " * ", means this data is the worst emission level. 3. Measurement Level = Reading Level + Correct Factor Page: 24 of 49

Site : SR-1 Time : 2009/03/30-09:40 Limit : CISPR_A_00M_AV Margin : 0 EUT : 2G 8/16PORT Serial Device Server Probe : ENV-216-L1 - Line1 Power : AC 120V/60Hz Note : Mode 2 Frequency Correct Factor Reading Level Measure Level Margin Limit Detector Type (MHz) 1 0.209 9.827 21.650 31.477-34.523 66.000 AVERAGE 2 0.349 9.827 24.490 34.317-31.683 66.000 AVERAGE 3 1.127 9.830 25.990 35.820-24.180 60.000 AVERAGE 4 2.322 9.850 27.810 37.660-22.340 60.000 AVERAGE 5 4.502 9.870 23.480 33.350-26.650 60.000 AVERAGE 6 * 19.891 10.210 36.050 46.260-13.740 60.000 AVERAGE Note: 1. All Reading Levels are Quasi-Peak and average value. 2. " * ", means this data is the worst emission level. 3. Measurement Level = Reading Level + Correct Factor Page: 25 of 49

Site : SR-1 Time : 2009/03/30-09:40 Limit : CISPR_A_00M_QP Margin : 10 EUT : 2G 8/16PORT Serial Device Server Probe : ENV-216-N - Line2 Power : AC 120V/60Hz Note : Mode 2 Page: 26 of 49

Site : SR-1 Time : 2009/03/30-09:41 Limit : CISPR_A_00M_QP Margin : 0 EUT : 2G 8/16PORT Serial Device Server Probe : ENV-216-N - Line2 Power : AC 120V/60Hz Note : Mode 2 Frequency Correct Factor Reading Level Measure Level Margin Limit Detector Type (MHz) 1 0.212 9.860 33.690 43.550-35.450 79.000 QUASIPEAK 2 0.353 9.845 28.620 38.465-40.535 79.000 QUASIPEAK 3 1.052 9.830 29.750 39.580-33.420 73.000 QUASIPEAK 4 * 2.318 9.850 34.810 44.660-28.340 73.000 QUASIPEAK 5 5.904 9.880 26.320 36.200-36.800 73.000 QUASIPEAK 6 * 19.966 10.230 37.630 47.860-25.140 73.000 QUASIPEAK Note: 1. All Reading Levels are Quasi-Peak and average value. 2. " * ", means this data is the worst emission level. 3. Measurement Level = Reading Level + Correct Factor Page: 27 of 49

Site : SR-1 Time : 2009/03/30-09:41 Limit : CISPR_A_00M_AV Margin : 0 EUT : 2G 8/16PORT Serial Device Server Probe : ENV-216-N - Line2 Power : AC 120V/60Hz Note : Mode 2 Frequency Correct Factor Reading Level Measure Level Margin Limit Detector Type (MHz) 1 0.212 9.860 24.550 34.410-31.590 66.000 AVERAGE 2 0.353 9.845 25.780 35.625-30.375 66.000 AVERAGE 3 1.052 9.830 28.730 38.560-21.440 60.000 AVERAGE 4 * 2.318 9.850 30.120 39.970-20.030 60.000 AVERAGE 5 5.904 9.880 20.750 30.630-29.370 60.000 AVERAGE 6 * 19.966 10.230 31.380 41.610-18.390 60.000 AVERAGE Note: 1. All Reading Levels are Quasi-Peak and average value. 2. " * ", means this data is the worst emission level. 3. Measurement Level = Reading Level + Correct Factor Page: 28 of 49

3.6. Test Photograph Test Mode : Mode 1: Normal Operation (CN2610-16) Description : Front View of Conducted Test Test Mode : Mode 1: Normal Operation (CN2610-16) Description : Back View of Conducted Test Page: 29 of 49

Test Mode : Mode 2: Normal Operation (NPort 5650-16-M-SC) Description : Front View of Conducted Test Test Mode : Mode 2: Normal Operation (NPort 5650-16-M-SC) Description : Back View of Conducted Test Page: 30 of 49

4. Radiated Emission 4.1. Test Specification According to EMC Standard : FCC Part 15 Subpart B, ANSI C63.4 4.2. Test Setup Under 1GHz Test Setup: Above 1GHz Test Setup: Page: 31 of 49

4.3. Limit Under 1GHz test shall not exceed the following value: Frequency (MHz) Limits Distance (m) dbuv/m 30 230 10 40 230 1000 10 47 Remark: 1. The tighter limit shall apply at the edge between two frequency bands. 2. Distance refers to the distance in meters between the measuring instrument antenna and the closed point of any part of the device or system. Above 1GHz test shall not exceed the following value: FCC Part 15 Subpart B Paragraph 15.109 Limits (dbuv/m) Frequency (MHz) Distance(m) dbuv/m 30-88 10 39 88-216 10 43.5 216-960 10 46.4 Above 960 10 49.5 Remark: 1. The tighter limit shall apply at the edge between two frequency bands. 2. Distance refers to the distance in meters between the measuring instrument antenna and the closed point of any part of the device or system. 3. RF Voltage (dbuv/m) = 20 log RF Voltage (uv/m) Page: 32 of 49

4.4. Test Procedure The EUT and its simulators are placed on a turn table which is 0.8 meter above ground. The turn table can rotate 360 degrees to determine the position of the maximum emission level and the antenna can move up and down between 1 meter and 4 meters to find out the maximum emission level. Both horizontal and vertical polarization of the antenna are set on measurement. In order to find the maximum emission, all of the interface cables must be manipulated on radiated measurement. For an unintentional radiator, including a digital device, the spectrum shall be investigated from the lowest radio frequency signal generated or used in the device, without going below the lowest frequency for which a radiated emission limit is specified, up to the frequency shown in the folowing table: Highest frequency generated or used in the device or on which the device operates or tunes (MHz) Upper frequency of measurement range (MHz) Below 1.705 30 1.705 108 1000 108 500 2000 500 1000 5000 5 th harmonic of the highest Above 1000 frequency or 40 GHz, whichever is lower On any frequency or frequencies below or equal to 1000 MHz, the radiated limits shown are based on measuring equipment employing a quasi-peak detector function and above 1000 MHz, the radiated limits shown are based measuring equipment employing an average detector function. When average radiated emission measurement are included emission measurement Above 1000 MHz, there also is a limit on the radio frequency emissions, as measured using instrumentation with a peak detector function, corresponding to 20 db above the maximum permitted average limit. For class A, the measurement distance between the EUT and antenna is 10 meters for under 1GHz and above 1GHz. For class B, the measurement distance between the EUT and antenna is 10 meters for under 1GHz and 3 meters for above 1GHz. The bandwidth below 1GHz setting on the field strength meter (R&S Test Receiver ESCS 30) is 120 khz and above 1GHz is 1MHz. Page: 33 of 49

4.5. Test Result Site : OATS-3 Time : 2009/03/27-03:50 Limit : CISPR_A_10M_QP Margin : 6 EUT : 2G 8/16PORT Serial Device Server Probe : Site3_CBL6112_10M_0811 - HORIZONTAL Power : AC 120V/60Hz Note : Mode 1 Frequency Correct Factor Reading Level Measure Level Margin Limit Detector Type (MHz) (dbuv/m) (dbuv/m) 1 125.000 15.012 2.000 17.012-22.988 40.000 QUASIPEAK 2 250.000 16.298 14.500 30.798-16.202 47.000 QUASIPEAK 3 396.000 19.976 7.300 27.276-19.724 47.000 QUASIPEAK 4 * 462.000 21.318 10.700 32.017-14.983 47.000 QUASIPEAK 5 750.000 25.603 2.600 28.203-18.797 47.000 QUASIPEAK 6 875.000 27.322 0.900 28.223-18.777 47.000 QUASIPEAK Note: 1. All Readings below 1GHz are Quasi-Peak, above are performed with peak and/or average measurements as necessary. 2. " * ", means this data is the worst emission level. 3. Measurement Level = Reading Level + Correct Factor Page: 34 of 49

Site : OATS-3 Time : 2009/03/27-03:42 Limit : CISPR_A_10M_QP Margin : 6 EUT : 2G 8/16PORT Serial Device Server Probe : Site3_CBL6112_10M_0811 - VERTICAL Power : AC 120V/60Hz Note : Mode 1 Frequency Correct Factor Reading Level Measure Level Margin Limit Detector Type (MHz) (dbuv/m) (dbuv/m) 1 125.000 15.012 6.400 21.412-18.588 40.000 QUASIPEAK 2 * 250.000 16.298 19.600 35.898-11.102 47.000 QUASIPEAK 3 384.000 19.648 2.000 21.648-25.352 47.000 QUASIPEAK 4 500.000 22.065 6.000 28.065-18.935 47.000 QUASIPEAK 5 750.000 25.603 1.600 27.203-19.797 47.000 QUASIPEAK 6 864.020 27.178 0.800 27.978-19.022 47.000 QUASIPEAK Note: 1. All Readings below 1GHz are Quasi-Peak, above are performed with peak and/or average measurements as necessary. 2. " * ", means this data is the worst emission level. 3. Measurement Level = Reading Level + Correct Factor Page: 35 of 49

Site : OATS-3 Time : 2009/03/27-03:21 Limit : CISPR_A_10M_QP Margin : 6 EUT : 2G 8/16PORT Serial Device Server Probe : Site3_CBL6112_10M_0811 - HORIZONTAL Power : AC 120V/60Hz Note : Mode 2 Frequency Correct Factor Reading Level Measure Level Margin Limit Detector Type (MHz) (dbuv/m) (dbuv/m) 1 125.000 15.012 14.000 29.012-10.988 40.000 QUASIPEAK 2 200.000 12.743 17.000 29.743-10.257 40.000 QUASIPEAK 3 288.000 17.140 15.000 32.140-14.860 47.000 QUASIPEAK 4 500.000 22.065 11.800 33.865-13.135 47.000 QUASIPEAK 5 625.000 24.054 16.500 40.554-6.446 47.000 QUASIPEAK 6 750.000 25.603 15.000 40.603-6.397 47.000 QUASIPEAK 7 * 875.050 27.324 16.600 43.924-3.076 47.000 QUASIPEAK Note: 1. All Readings below 1GHz are Quasi-Peak, above are performed with peak and/or average measurements as necessary. 2. " * ", means this data is the worst emission level. 3. Measurement Level = Reading Level + Correct Factor Page: 36 of 49

Site : OATS-3 Time : 2009/03/27-03:14 Limit : CISPR_A_10M_QP Margin : 6 EUT : 2G 8/16PORT Serial Device Server Probe : Site3_CBL6112_10M_0811 - VERTICAL Power : AC 120V/60Hz Note : Mode 2 Frequency Correct Factor Reading Level Measure Level Margin Limit Detector Type (MHz) (dbuv/m) (dbuv/m) 1 * 51.800 10.243 26.600 36.843-3.157 40.000 QUASIPEAK 2 85.400 12.012 24.600 36.613-3.387 40.000 QUASIPEAK 3 111.640 14.927 20.800 35.727-4.273 40.000 QUASIPEAK 4 125.000 15.012 17.400 32.412-7.588 40.000 QUASIPEAK 5 200.000 12.743 21.700 34.443-5.557 40.000 QUASIPEAK 6 500.000 22.065 4.300 26.365-20.635 47.000 QUASIPEAK 7 750.000 25.603 9.400 35.003-11.997 47.000 QUASIPEAK 8 875.000 27.322 12.800 40.123-6.877 47.000 QUASIPEAK Note: 1. All Readings below 1GHz are Quasi-Peak, above are performed with peak and/or average measurements as necessary. 2. " * ", means this data is the worst emission level. 3. Measurement Level = Reading Level + Correct Factor Page: 37 of 49

Site : OATS-3 Time : 2009/03/27-10:17 Limit : FCC_A_(Above_1G)_03M_PK Margin : 6 EUT : 2G 8/16PORT Serial Device Server Probe : 9120D_1-18G_Horn - HORIZONTAL Power : AC 120V/60Hz Note : Mode 1 Frequency Correct Factor Reading Level Measure Level Margin Limit Detector Type (MHz) (dbuv/m) (dbuv/m) 1 1062.500-6.461 49.200 42.739-36.761 79.500 PEAK 2 * 1312.500-5.574 51.020 45.446-34.054 79.500 PEAK Note: 1. All Readings below 1GHz are Quasi-Peak, above are performed with peak and/or average measurements as necessary. 2. " * ", means this data is the worst emission level. 3. Measurement Level = Reading Level + Correct Factor Page: 38 of 49

Site : OATS-3 Time : 2009/03/27-10:26 Limit : FCC_A_(Above_1G)_03M_PK Margin : 6 EUT : 2G 8/16PORT Serial Device Server Probe : 9120D_1-18G_Horn - VERTICAL Power : AC 120V/60Hz Note : Mode 1 Frequency Correct Factor Reading Level Measure Level Margin Limit Detector Type (MHz) (dbuv/m) (dbuv/m) 1 1025.000-6.546 49.600 43.054-36.446 79.500 PEAK 2 * 1550.000-5.019 48.400 43.381-36.119 79.500 PEAK Note: 1. All Readings below 1GHz are Quasi-Peak, above are performed with peak and/or average measurements as necessary. 2. " * ", means this data is the worst emission level. 3. Measurement Level = Reading Level + Correct Factor Page: 39 of 49

Site : OATS-3 Time : 2009/03/27-15:18 Limit : FCC_A_(Above_1G)_03M_PK Margin : 6 EUT : 2G 8/16PORT Serial Device Server Probe : 9120D_1-18G_Horn - HORIZONTAL Power : AC 120V/60Hz Note : Mode 2 Frequency Correct Factor Reading Level Measure Level Margin Limit Detector Type (MHz) (dbuv/m) (dbuv/m) 1 1625.000-4.953 54.200 49.247-30.253 79.500 PEAK 2 * 2562.500-1.365 55.300 53.935-25.565 79.500 PEAK Note: 1. All Readings below 1GHz are Quasi-Peak, above are performed with peak and/or average measurements as necessary. 2. " * ", means this data is the worst emission level. 3. Measurement Level = Reading Level + Correct Factor Page: 40 of 49

Site : OATS-3 Time : 2009/03/27-15:26 Limit : FCC_A_(Above_1G)_03M_PK Margin : 6 EUT : 2G 8/16PORT Serial Device Server Probe : 9120D_1-18G_Horn - VERTICAL Power : AC 120V/60Hz Note : Mode 2 Frequency Correct Factor Reading Level Measure Level Margin Limit Detector Type (MHz) (dbuv/m) (dbuv/m) 1 1000.000-6.600 56.300 49.700-29.800 79.500 PEAK 2 * 1250.000-5.902 55.700 49.799-29.701 79.500 PEAK Note: 1. All Readings below 1GHz are Quasi-Peak, above are performed with peak and/or average measurements as necessary. 2. " * ", means this data is the worst emission level. 3. Measurement Level = Reading Level + Correct Factor Page: 41 of 49

4.6. Test Photograph Test Mode : Mode 1: Normal Operation (CN2610-16) Description : Front View of Radiated Test Test Mode : Mode 1: Normal Operation (CN2610-16) Description : Back View of Radiated Test Page: 42 of 49

Test Mode : Mode 1: Normal Operation (CN2610-16) Description : Front View of High Frequency Radiated Test Test Mode : Mode 2: Normal Operation (NPort 5650-16-M-SC) Description : Front View of Radiated Test Page: 43 of 49

Test Mode : Mode 2: Normal Operation (NPort 5650-16-M-SC) Description : Back View of Radiated Test Test Mode : Mode 2: Normal Operation (NPort 5650-16-M-SC) Description : Front View of High Frequency Radiated Test Page: 44 of 49

5. Attachment EUT Photograph (1) EUT Photo (2) EUT Photo Page: 45 of 49

(3) EUT Photo (4) EUT Photo Page: 46 of 49

(5) EUT Photo (6) EUT Photo Page: 47 of 49

(7) EUT Photo (8) EUT Photo Page: 48 of 49

(9) EUT Photo Page: 49 of 49