General-Purpose Photoelectric Sensor

General-Purpose Photoelectric Sensor Wide Selection of High Performance Small DC Sensors Offers Longer Sensing Distances Fast 0. msec response time for high-speed sensing Extended sensing distances up to meters Self-diagnostic functions available User-friendly features for easy installation and use Meets: NEMA X, 6 and IP6 Many mounting configurations available Choose pre-leaded or connector-ready models D Series includes cm short range diffuse version Ordering Information SENSORS Through-beam sensors include both emitter and receiver. The polarized retroreflective sensors include E39-R reflector. All sensors include mounting hardware. Optional mounting brackets are available as accessories. Method of detection Through-beam Polarized Diffuse reflective retroreflective Sensing distance m (.9 ft) m (6.6 ft) cm (3.9 in) cm (.8 in) 0 cm (.3 ft) Mounting Output Extra features Connection Part number Horizontal NPN None Pre-leaded T R D3 D D None Connector T6 R6 D8 D6 D Timer, Pre-leaded T R D3* D D* alarm and turbo PNP None Pre-leaded T3 R3 D33 D3 D3 None Connector T36 R36 D38 D36 D3 Timer, Pre-leaded T R D3* D D* alarm and turbo Vertical NPN None Pre-leaded T6 R6 D63 D6 D6 None Connector T66 R66 D68 D66 D6 Timer, Pre-leaded T R D3* D D* alarm and turbo PNP None Pre-leaded T8 R8 D83 D8 D8 None Connector T86 R86 D88 D86 D8 Timer, Pre-leaded T9 R9 D93* D9 D9* alarm and turbo * and 0 cm diffuse versions do not have turbo function

ACCESSORIES Description Part number Mounting bracket for vertical sensors ( required for through-beam type) E39-L9 Slits for T sensors (3 pairs: mm, mm and 0. mm wide, includes mounting hardware) E39-S6 Mutual interference filters for T sensors ( pairs: horizontal and vertical, includes mounting hardware) E39-E6 Optical alignment reflector for T E39-R Straight connector cordsets m (6.6 ft) cable Y96E-3SD (-pole female connector) m (6.0 ft) cable Y96E-3SD m (3.8 ft) cable Y96E-3SD Right-angle connector cordsets m (6.6 ft) cable Y96E-3RD (-pole female connector) m (6.0 ft) cable Y96E-3RD m (3.8 ft) cable Y96E-3RD Small corner cube reflector to 30 cm (3.9 to.8 in) E39-R3 to 60 cm (.6 to 3.6 in) E39-R Adhesive back reflector to 30 cm (3.9 to.8 in) E39-RSA to 60 cm (3.9 to 3.6 in) E39-RSB Mounting bracket for E39-R reflector E39-L REPLACEMENT PARTS Description Knob for sensitivity adjuster Mounting bracket spacer for connector versions Corner cube reflector (supplied with R ) Mounting bracket for horizontal sensors (supplied with each sensor) Mounting bracket for vertical sensors (supplied with each sensor) Part number E39-G E39-L60 E39-R E39-L69 E39-L0 Specifications Part number T R D 3, D, D, D 8 D 6 D Method of detection Through-beam Polarized Diffuse reflective retroreflective Supply voltage to 30 VDC, ±% Current consumption 0 ma max. 30 ma max. 3 ma max. 30 ma max. 3 ma max. (emitter and ma with turbo ma with turbo receiver) ma with turbo Sensing White 0 to m 0. to m with E39-R 0 to cm 0. to cm 0 to 0 cm distance mat paper (0 to.9 ft) (0.33 to 6.6 ft) (0 to 3.9 in) (0.0 to.8 in) (0 to.6 in) Black 0.3 to. cm 0. to.3 cm 0. to 33 cm mat paper (0. to 0.98 in) (0. to 0.9 in) (0.06 to.99 in) With. m (.8 ft) to 30 cm with E39-R3 accessories with E39-E6 (3.9 to.8 in). m (8. ft) to 60 cm with E39-R with mm slit (.6 to 3.6 in). m (3.6 ft) to 30 cm with E39-RSA with mm slit (3.9 to.8 in) 0. m (.6 ft) to 60 cm with E39-RSB with 0. mm slit (3.9 to 3.6 in) Light source Pulse modulated red LED (00 nm) Pulse modulated Pulse modulated Pulse modulated infrared LED red LED infrared LED (880 nm) (00 nm) (880 nm) Standard Type Opaque materials Opaque and transparent materials object Size mm (0.8 in) 30 mm (.8 in) x cm (3.9 x 3.9 in) x cm minimum minimum white mat paper (.8 x.8 in) white mat paper Operation mode Light-ON/Dark-ON operation, switch selectable Variation in +30% max., 0% max. sensing distance Hysteresis % max. % max. Variation in optical axis ± max. and mounting direction

SPECIFICATIONS (continued) Part number T R D 3, D, D, D 8 D 6 D Sensitivity Adjustable, -turn knob with clutch and indicator Mutual interference Not provided Provided Provided Provided Provided protection Control Type NPN transistor, open collector (,, 6, ), (D, D, D6, D ) PNP transistor, open collector ( 3,, 8, 9 ), (D3, D, D8, D9 ) Max. load 0 ma max. at 30 VDC Max. VDC max. at 0 ma load current ON-state voltage drop Self-diagnostics 0 ma max. load at 30 VDC, NPN or PNP transistor open collector to match control alarm Response time 0. ms max. ON, 0. ms max. OFF OFF-delay timer 0 to 0 ms with 3/ turn adjuster Check NPN Light OFF: gray wire connected to 0 to. VDC input PNP Light OFF: gray wire connected to supply voltage (30 VDC max.) Response 0. ms max. 0. ms max. time Circuit protection short- protection, reverse polarity protection Indicators Emitter: Operation (red), Stability (green) Operation (red) Receiver: Operation (red) Stability (green) Materials Lens Denatured polyarylate Case Polybutylene terephthalate (PBT) Bracket Stainless steel Mounting Either side surface with two threaded holes. Bracket E39-L69 for horizontal or E39-L0 for vertical sensors and hardware included. Connections Prewired m (6.6 ft) long cable Connector M threaded connector, pin Weight Prewired Emitter: 60 g (. oz.) 60 g (. oz.) 60 g (. oz.) 60 g (. oz.) 60 g (. oz.) Receiver: 60 g (. oz.) Connector Emitter: g (0. oz.) g (0. oz.) g (0. oz.) g (0. oz.) g (0. oz.) Receiver: g (0. oz.) Enclosure IEC IP6 rating NEMA X, 6 Ambient Operating - to C (-3 to 3 F) with no ice build-up temperature Storage -0 to 0 C (-0 to 8 F) 3

Operation OUTPUT CIRCUIT DIAGRAMS NPN Cable Type Through-beam emitter T, T6 Through-beam receiver T, T6 Retroreflective R, R6 Diffuse reflective D, D, D3, D6, D6, D63 Light Stability (Red) (Green) to 30 VDC NOTE: IEC colors are shown in parentheses. White (Black) 0 ma max. to 30 VDC NPN Cable Type with Self-Diagnostic Functions Through-beam emitter T, T Through-beam receiver T, T Diffuse reflective D, D, D, D to 30 VDC Light Stability (Red) (Green) Grey (Pink) Check input 0 V 0 ma max. 0 ma max. White (Black) Control (Orange) Self-diagnostic to 30 VDC NPN Cable Type with Alarm Output Diffuse reflective D3, D3 NPN Cable Type with Self-Diagnostic Functions Retroreflective R, R Light Stability (Red) (Green) Light Stability (Red) (Green) 0 ma max. 0 ma max. White (Black) Control (Orange) Alarm to 30 VDC 0 ma max. 0 ma max. K White (Black) Control Orange Self-diagnostic Gray Check input (Pink) to 30 VDC NPN Connector Type Through-beam emitter Through-beam receiver T6, T66 T6, T66 Retroreflective R6, R66 Diffuse reflective D6, D, D8, D66, D6, D68 Output

PNP Cable Type Through-beam emitter T3, T8 Through-beam receiver T3, T8 Retroreflective R3, R8 Diffuse reflective D3, D3, D33, D8, D8, D83 Light Stability (Red) (Green) to 30 VDC NOTE: IEC colors are shown in parentheses. Control White (Black) 0 ma max. to 30 VDC PNP Cable Type with Self-Diagnostic Functions Through-beam emitter T, T9 Through-beam receiver T, T9 Diffuse reflective D, D, D9, D9 to 30 VDC Check input Gray (Pink) 0 V Light Stability (Red) (Green) Self-diagnostic 0 ma max. Orange Control 0 ma max. White (Black) to 30 VDC PNP Cable Type with Alarm Output Diffuse reflective D3, D93 Retroreflective R, R9 Light (Red) Stability (Green) 0 ma max. 0 ma max. Alarm Orange (White) Control White (Black) to 30 VDC Light Stability (Red) (Green).K 0 ma max. 0 ma max. White (Black) Check input Gray (Pink) Selfdiagnostic Orange to 30 Control VDC PNP Connector Type Through-beam emitter Through-beam receiver T36, T86 T36, T86 Retroreflective R36, R86 Diffuse reflective D36, D3, D38, D86, D8, D88, Output NOTE: IEC colors are shown in parentheses.

Engineering Data EXCESS GAIN RATIO Excess Gain vs. Set Distance (Typical) T D, -AD (Detection of White Paper) D, -AD (Detection of Black Paper) Excess gain ratio 00 300 0 0 30 3 0 3 Distance (m) Excess gain ratio 00 300 0 0 30 3 Sensing object: white (D : x cm D : x cm) D D 0. 0 0 60 80 0 Distance (cm) Excess gain ratio 0 0 30 3. 0.3 D Sensing object: black (D : x cm D : x cm) D 0. 0 0 60 80 Distance (cm) D, -AD (White Paper within Short Distance) D, -AD (Black Paper within Short Distance) D 3, -AD 8 (Detection of White Paper) Excess gain ratio 00 0 0 0 Sensing object: white (D : x cm D : x cm) D D Excess gain ratio 00 0 0 0 Sensing object: white (D : x cm D : x cm) D Excess gain ratio 6 3 Sensing object: white (D 3/E3S- AD 8: x cm) D 0 3 6 8 9 Distance (cm) 0 3 6 8 9 Distance (cm) 0 0 0 0 0 Distance X (mm) D 3, -AD 8 (Detection of Black Paper) R (With Reflector: E39-R) 6 Sensing object: black (D 3/E3S- AD 8: x cm) 0 0 30 Excess gain ratio 3 Excess gain ratio 3 Operating level 0 0 60 80 0 Distance X (mm) 0 0. 0. 0.6 0.8...6.8...6 Distance (m) 6

OPERATING RANGE Parallel Operating Range (Typical) T Operating Range (Typical) D D Parallel operating range Y (cm) 0 0 30 0 30 0 Y X 6 8 Distance X (m) Operating position Y (mm) 8 6 0 6 8 Y X Distance X (cm) Operating position Y (mm) 3 0 3 0 60 80 Distance X (cm) Y X 0 OPERATING RANGE (typical) D 3, D 8 (Left and Right) D 3, D 8 (Up and Down) SENSING DISTANCE VS. OBJECT SIZE D 3, D 8 Operating position Y (mm) 60 0 0 - -0-60 0 0 60 80 0 0 60 Distance X (mm) X Y Operating position Y (mm) 60 0 0 - -0-60 0 0 60 80 0 0 60 Distance X (mm) X Y Sensing distance (mm) 0 Sensing object: white OFF 80 ON 60 0 0 0 30 3 Area of object (cm) SENSING DISTANCE VS. OBJECT SIZE REFLECTOR PARALLEL MOVEMENT D D (Typical) R Sensing distance (cm) 38 36 3 3 30 8 6 Sensing object: white OFF ON Sensing distance (cm) 00 90 80 0 Sensing object: white OFF ON Parallel operating range Y (cm) 8 6 0 6 8 0..0..0. Distance X (m) X Y 0 x x x 30x30 Size of object (cm) 60 0 x x x 30x30 Size of object (cm)

Dimensions Unit: mm (inch) SENSORS D, D, D3, D3, D3, D33 (see note ), D, D, D3, D, D, D3 Receiver: T, T3 (see note ) Emitter: T, T3 (see note 3) T, T T, T Light indicator (red).9 Sensitivity adjuster (white) Time adjuster (black) 0 (.). Light indicator (red).9 0 (.). Turbo switch. (0.9). (0.9) Lens x Stability indicator (green).3 (0.88).3 (0.88) 8... M3 holes (typ.) D6, D6, D63, D8, D8, D83 (see note ), D, D, D3, D9, D9, D93 Receiver: T6, T8 (see note ) Emitter: T6, T8 (see note 3) T, T9 T, T9 Lens x 0 3. 8.3 Lens x 3. 0 8.3.. Stability indicator (green) 3.6. Light indicator (red) Sensitivity adjuster (white) Time adjuster (Turbo switch) (black) Turbo switch... M3 holes (typ.) NOTES:. No time adjuster/turbo included on models D6, D6, D8and D8.. No time adjuster included on models T6 and T8. 3. No turbo switch included on models T6 and T8. 8

SENSORS (continued) D6, D, D8, D36, D3, D38 Receiver: T6, T36 Light indicator (red).9 Sensitivity adjuster (white) (receiver only) 0 (.9) 0 M connector Emitter: T6, T36.8 0 M Light indicator (red) connector. (0.9). Lens x Stability indicator (green) 8... D66, D6, D68, D86, D8, D88 Receiver: T66, T86 (.0) Lens x 0 3. 8.3 M connector Emitter: T66, T86 0 3. 8.3 M connector (0.) Stability indicator (green) 3.6 Light indicator (red) Sensitivity adjuster (white) Lens x (0.83)... R, R3 (see note) R, R Light indicator (red)..3.3 Sensitivity adjuster OFF-delay time adjuster/turbo (white) switch (black) Turn to adjust the OFF-delay time: push to switch turbo function on.. 9. Lens x Receiver Stability indicator (green) Light-ON/Dark-ON selector (0.89).. Emitter.3. NOTE: No time adjuster/turbo included on models R and R3. 9

SENSORS (continued) R6, R8 R, R9 Receiver Lens x 3. 0 8.3 Emitter. (0.9) Stability indicator (green).9 3.3 (0.9). Light indicator (red) Sensitivity adjuster (white) OFF-delay time adjuster/turbo switch (black) Turn to adjust the OFF-delay time: push to switch turbo function.. M3 holes (typ.) R6, R36 Light indicator (red)..3.3 Sensitivity adjuster (white) M connector. Lens x Receiver Stability indicator (green).. Emitter. R66, R86 Lens x Receiver Emitter 0 M connector.9 Stability indicator (green) 3.6 Light indicator (red) Sensitivity adjuster (white)..

OPTIONAL CONNECTOR CORDSETS Cordsets consist of a female connector and 3-conductor, AWG, PVC jacketed cable rated for 300 V, 90 C. The cable may be extended to a maximum of 0 m (66 ft). Straight Connector Cordsets Y96E-3SD Face View, Female Connector.6 (0.) 3.9 () Aluminum coupling nut 90. Output* White Silver-plated copper contacts m (6.6 ft) length for Y96E-3SD m (6.0 ft) length for Y96E-3SD m (3.8 ft) length for Y96E-3SD. +V Red (Brown) 3. 0 V. Output White (Black) Right Angle Connector Cordsets Y96E-3RD.6 (0.) 6. (.0) Aluminum coupling nut NOTES: *Not used on 3-wire models. IEC colors are shown in parentheses. Silver-plated copper contacts m (6.6 ft) length for Y96E-3RD m (6.0 ft) length for Y96E-3RD m (3.8 ft) length for Y96E-3RD CORNER CUBE REFLECTORS E39-R Reflector (included with R ). (0.30) 3 (39). (0.) (0.6) Two 3. (0.) dia..6 (0.06) 9.9 9 (.36) (.3) (.0) (.0) 8 (0.3) E39-L Reflector Adapter for E39-R Reflector 39.3 (.) 3 () Two M3 3. (0.3) (0.) Nut (M) M Spring washer (M)

CORNER CUBE REFLECTORS (continued) E39-R3 Optional Reflector Dimensions with E39-L Mounting Bracket (included). 9 (.) 6 3. 0. 3..9 8. 3. 0. Two M3 (0.3) 6 (0.63) 3.8. 3 38.8. ± 0. 38 (.0) 3 (3) 9.3 Two M3.... E39-R Optional Mini-reflector 3. 9.±0..9 3 9±0. Two,. dia.. E39-RSA Optional Adhesive-backed Reflector E39-RSB Optional Adhesive-backed Reflector 0 38 0. 8 3 33 Four R Reflective surface 0. Adhesive tape side 3 33 Four R Reflective surface Adhesive tape side OPTICAL AXIS CONFIRMATION REFLECTOR E39-R for Sensors.9 9...6.9 Bracket clips to the front of receiver 9.9. 0.9.

SLITS AND FILTERS E39-S6 Slits E39-E6 Mutual Interference Filter Kit for through-beam sensors contains 0. mm, mm and mm wide slits and mounting frame..6 A. 6.8.6 6.8 3.6. or. 9.. A = Slit width. MOUNTING SPACER FOR CONNECTOR-TYPE SENSORS E39-L60 Spacer 33 6. 6..... 3. dia. 3. dia. MOUNTING BRACKETS (supplied with sensors) E39-L69 Mounting Bracket E39-L0 Mounting Bracket. 6. 3.. 6... 3..8 30 3. 3.6.. Four mounting holes.... Two, M3 x screws Two, M3 x screws 3

E39-L9 OPTIONAL VERTICAL MOUNTING BRACKET 0. 6..3.3. Two mounting holes 3.6 Mounting bracket (E39-L9). 3. 6. 8 3. 3. 3.. Two, M3 x screws E39-G SENSITIVITY ADJUSTER KNOB 8 dia. 0.8.6 dia. MOUNTING BRACKET NOTCH Each mounting bracket slot has a notch to provide a center position for aligning the sensor parallel to the bracket. This ensures that the beam is aligned with the mounting surface. Base of mounting bracket Mounting direction Bracket can move in this direction lock hole (M3)

Installation SENSITIVITY ADJUSTMENT Steps Step Step Step 3 Function Determine Position A Determine Position B Adjust to optimum setting Sensing Condition Photoelectric sensor Photoelectric sensor Photoelectric sensor Sensing object Sensing object Sensing object Sensitivity adjuster A B A B Min Max Min Max Min Max Indicators OFF ON OFF OFF ON OFF STABILITY (green) LIGHT (red) STABILITY (green) LIGHT (red) STABILITY (green) LIGHT (red) Procedure Place target at the desired sensing distance. Set sensitivity adjuster to the minimum scale position, and gradually increase sensitivity by turning the sensitivity adjuster clockwise until the Light Incident indicator (red LED) turns ON. Position A designates the point at which the LED has turned ON. Remove the target. Starting from the maximum scale position, gradually decrease sensitivity by turning the sensitivity adjuster counterclockwise until the Light Incident indicator (red LED) turns OFF. Position B designates the point at which the LED has turned OFF. Set the sensitivity indicator to the position between Positions A and B (in some cases, Positions A and B are opposite of the above example). The photoelectric sensor will then work normally if the stability indicator (green) is lit with and without the target. If it is not lit, stable operation cannot be expected, in which case a different detection method should be applied. Unlike conventional photoelectric sensors, the variation in the sensitivity of E3S photoelectric sensors is minimal. This means the sensitivity can be adjusted on only a single photoelectric sensor, and then the adjusters on the other photoelectric sensors can be set to the same scale position. There is no need to adjust the sensitivity of each photoelectric sensor individually. TIMER AND TURBO SWITCH E3S Sensors equipped with the self-diagnostic feature incorporates an OFF-delay timer that can be adjusted within range of 0 to 0 ms. The emitter of the through-beam sensor with the self-diagnostic feature incorporates a turbo switch. When this switch is on, the intensity of the red LED light source can be increased to make a brighter spot. The OFF-delay time adjuster of the retroreflective and the -cm diffuse reflective sensor is used as a turbo switch. When the adjuster is pressed, it functions as a turbo switch to automatically increase the power of the light source to create a brighter light spot. Do not press the adjuster when turning it. Turbo Function (Turbo Switch) With the turbo function switched ON, the light spot is visible even at a distance of cm (.8 in), making it easy to check the sensing position and the angle of the optical axis.. After using the turbo function, readjust the OFF-delay time that had been set, since the OFF-delay time could have been changed when the turbo switch (which is on the OFFdelay time adjuster) was pressed.. Press the OFF-delay time adjuster to switch ON the turbo function with a maximum force of kg and within a maximum period of 3 minutes. (The photoelectric sensor, however, will not malfunction even if the turbo function is switched on for more than 3 minutes.) The turbo function is effective with the turbo switch pressed, and the function is reset automatically when released. With Turbo Switch ON Sensitivity adjuster The OFF-delay time adjuster is used as a turbo switch (black) Visible spot PUSH Normal Operating Condition

Self-Diagnostic Function With this function, the sensor checks changes in environmental conditions (especially a change in the ambient temperature) and self-diagnoses the resistance against the changes. The result is shown by the indicators or an signal. Amount of incident light Incident light indicator (red) Indicator Green Indicator Selfdiagnostic function Self-diagnostic example. or more With light incident (red indicator: ON) Green Red Stable operating state with incident light: Stable operation is expected in the rated temperature range with the green indicator ON..0 to. Green Red Conditional operating state with incident light: Stable operation is expected if the temperature fluctuation is within ±% of the primary temperature. The selfdiagnostic alarm alerts the user to this state if it continues for 0.3 s. The optical axis misaligned by vibration. Light decreased by dust. Dust 0.8 to.0 Without light incident (red indicator: OFF) Green Red With light leakage (through-beam and retroreflective sensors) Sensing object Light reflected from the floor or the background (diffuse reflective sensors) Sensing object With the influence of external noise Noise 0.8 or less Green Red Stable operating state with no incident light: Stable operation is expected in the rated temperature range with the green indicator ON. EXTERNAL DIAGNOSTIC INPUT FUNCTION To switch the emission off, short- the gray (pink) and the black (blue) cords of the emitter of the T or the R with the NPN feature. For the R with the PNP feature, short- the gray (pink) and the red (brown) cords. NOTE: IEC colors are shown in parentheses. Light emission No emission + V OFF (with PNP ) Gray (Externaldiagnostic input) OFF (with NPN ) 0 V + V ON (with PNP ) Gray (Pink) (Externaldiagnostic input) ON (with NPN ) 0 V 6

SLITS FOR THROUGH-BEAM SENSORS E39-S6 Slit Set Using slits allows smaller objects to be detected and reduces the sensing distance. Slit width Sensing distance Min. object size 0. mm 0. m (.6 ft) 0. mm (0.0 in) mm. m (3.6 ft) mm (0.0 in) mm. m (8. ft) mm (0.08 in) Use the rubber attachment with the metal cover if a slit width of mm is required. Insert the 0.- or -mm slit between the metal cover and rubber attachment if a slit width of 0. or mm is desired. These slits fit into the rubber attachment. mm Notches to hold cover Metal cover Slit (0. mm or mm) Rubber attachment Arrow indicating position of optical axis NOTE: Apply the slit to the lens of the photoelectric sensor marked with an arrow indicating the position of the optical axis (apply it to the bottom lens of horizontal sensors and the top lens of vertical sensors). OPTICAL AXIS CONFIRMATION REFLECTOR E39-R Use this attachment when the set distance is long and adjustment is mechanically difficult with a sensing object. Attach the reflector to the receiver (refer to the figure). Look at the reflector from right behind the emitter. The reflector should be bright with red light when the optical beam strikes the reflector. If the emitter has a turbo function, the reflector looks brighter with the function switched on. When the reflector is removed, the light beam strikes the receiver. Eye Emitter E39-R Receiver confirmation reflector ADJUSTER CAP AND OPTIONAL E39-G SENSITIVITY ADJUSTER KNOB Adjuster Cap (Supplied with each sensor) In order to prevent the sensitivity or OFF-delay time that has been set from changing accidentally, cover the adjusters with the adjuster cap (enclosed). Aduster cap E39-G Adjuster Knob To temporarily use the knob to adjust the sensitivity of the photoelectric sensor, insert side A into the shaft of the sensitivity adjuster. To snap the adjuster onto the sensor, push side B onto the sensitivity knob. (A) Press the adjuster cap until this face touches the name plate on the sensor. Aduster (B) E39-E6 MUTUAL INTERFERENCE FILTER A set of filters are sold together for two through-beam models (for each of emitters and receivers). The arrow printed on the cover indicates the direction of polarization. By attaching the filters opposite to each other in polarization to the emitters and the receivers (refer to the figure) in rows, mutual interference can be prevented (in any case, the filter attached to an emitter and to the corresponding receiver must be the same in direction of polarization or the photoelectric sensor will not function). Receiver Emitter Be aware of the direction of polarization.

NOTE: DIMENSIONS ARE SHOWN IN MILLIMETERS. To convert millimeters to inches divide by.. OMRON ELECTRONICS, INC. OMRON CANADA, INC. One East Commerce Drive 88 Milner Avenue Schaumburg, IL 603 Scarborough, Ontario MB V8-800--OMRON 6-86-66 8 Cat. No. CEDSAX3 /99 Specifications subject to change without notice. Printed in the U.S.A.