Minutes/Newsletter of Space Coast Woodturners April 8, 2015 Submitted by Dotty Pugh Secretary Just a reminder the meetings are held on the second Wednesday of the month from 7:00 9:00 PM and the handson sessions are held on the third Saturday of the month from 9:00 AM Noon at Melbourne Village. * President - Russ Bremmer Opened the meeting at 7:03 PM. He welcomed everyone and asked if there were no guests. * Secretary s Report Dotty Pugh No report. * Treasurer s Report Harvey Driver The treasury currently contains $xxxx.xx Harvey had three Eagle heads for canes for sale. The all sold. Harvey is still accepting membership dues for 2015. If you haven t paid yet, please do so. The fees are: Individual - $25.00, Family - $30.00. * Vice President s Report Gary Christensen The April demonstration was Gary Christensen making a walking cane. May VP Challenge will be J, K or L. May hands-on will be Ken Thurman hand thread chasing bring your own thread chasing set. If you don t have a thread chasing set, you need to order one before May so you will have it for the Hands-on in May. Ken recommends 16 TPI or 20 TPI. You will need to bring your own wood that is tightly grained. June hands-on will be blind hollowing. Bring your own tools and wood. Remember - Bring your own tools and safety equipment to all hands-on sessions. * Supply Master Jim Donovan Had $80.00 towards the next order. Jim had two bags of Tagua nuts that had been ordered, but he didn t know who had ordered them. If you ordered them, contact Jim. He was expecting new Craft Supply catalogs in May. Just a reminder Gift Certificate have an expiration date. Use them before they expire. * DVD Librarian/Store Manager Bob Cusumano Has everything in stock glue, sand paper, etc. Reminded everyone that there are a lot of DVDs to choose from and they are available to rent for only $1.00 each. You get to keep it for the entire month. * Web Master - Bill Howard Go to spacecoastwoodturners.com and see what is available. We also have a Facebook page where you can upload photos, etc. Check it out! If you have any information that needs to be on the web page (things for sale, etc.) or if you have problems uploading photos to the Facebook page contact Bill at BillH@spacecoastwoodturners.com and he will help you. He also mentioned that someone told him that they weren t able to find some information on the web page. Contact Bill and he will help you find it. He is going to be rearranging the site to make it more user-friendly. The Brevard club will be shutting down their website due to lack of use. Let s not let this happen to our website. Chuck Billings Nametags for new members. If you haven t gotten yours yet, see Chuck.
*Charlie Cecrle will be taking over the duties of getting shirts for the club. Bring your own new shirt to the meeting and what name you want on it and Charlie will collect the shirts, get the embroidery done and return your shirt to you at the next meeting. SCWT Logo and name on shirt is $14.00; a patch with Logo only is $9.00. The person can also do ball caps, jackets, etc. Terry Justice had some magazines to donate to anyone who wanted them. Ken Thurman had a large piece of Cherry Burl and the limb that they were attached to for the wood auction. Someone donated some camphor for the wood auction. Auction There were 9 items for the auction and $70.00 went to the club. If you have wood or other items to donate, bring them to the meetings. Also, if you want to purchase good wood at reasonable prices (way below retail!), bring your money and bid, bid, bid. All the profits go to the club. SHOW & TELL Terry Justice showed a Red Wine bottle stopper that Ken Thurman made at the hands-on session in March. Terry attached the metal stopper part. Steve Franek Hollow vessel Red Elm Wynn Arnold Small hollow vessel Redwood Burl Rick DeTorre Bolt action pen Deer antler Jim Goodman Vase Cherry wood Elizabeth Barrett Letter opener Teak Russ Bolton Christmas ornament Ball of Cherry and Oak, and the finial was mystery wood Ron Miller Natural edge bowl Mahogany Bernie MacDonald Magnetic pen Acrylic Harvey Driver Vertex magnetic pen Scrap burl Vice President s Challenge G, H OR I Rick DeTorre Gee, I wish I hadn t broken it bowl Norfolk Island Pine He went through the bottom. Russ Bolton Pen Gunstock laminate Gary Christensen Lidded Goblet Base of Cherry, lid of Maple and finial of Walnut Bruce Lansdowne Pen Hole wheat Ned Robertson Bottle stopper Ipe wood Winner of the drawing Bruce Lansdowne (virtual gift certificate Gary didn t have the actual certificate with him) Raffle Winners: $10.00 Gift Certificate Neil Earnhardt $10.00 Gift Certificate Harvey Driver $10.00 Gift Certificate Chuck Billings using Russ Bolton s ticket (Russ had to leave early) Block of Camphor Bernie MacDonald Free DVD rental Bruce Lansdowne Bring Back Item Donated by Bob Davis Box made on the Bandsaw Winner Steve Franek Share the Wealth 1 Donated by Anonymous Cedar bottle stopper Winner Wynn Arnold If you are not familiar with the Bring Back idea, it is where a member turns something and donates it to the club. Then the winner of the drawing (has to be a member, not a visitor) gets to keep the item and then must turn something and bring it back the next month and donate it. The item doesn t have to be the same thing; it can be anything that you turned. D
If you are not familiar with the Share the Wealth idea, it is where members donate an item that they have turned and it is raffled off to another member/visitor. It is a good way to collect turned items from others and the cost is FREE. What a great bargain. Hope to see you at our May 13, 2015 meeting. Don t forget to contact Russ Bremmer or Gary Christensen for items that you want to display at the DeGroot Library in Palm Bay during the month of May. There will be a locked display cabinet for our items. If you wish to display some of your items, make sure that you have a 3 x 5 card with your name, description of item, type of wood and whether it is for sale or not. If it is for sale, make sure you include the price. If it is not for sale, make sure that information is on the card, too. Russ will even pick up your items to take to the Library. Russ and Gary have asked the members to participate in the demo at the Library on Sunday, May 17, 2015 from 1:00 PM until 5:00 PM. There is a covered porch where the demonstrations will be held. If you can make items that are interesting and don t take a long time to complete, please sign up for this. Suggested items are spinning tops, pens (ready to be turned already drilled, tube attached, etc.) or any items that are small and quick to make. You don t have to be a master turner, just enthusiastic about turning. Remember to bring your own tools, wood and especially safety gear. See next page for demo handouts from Gary Christensen. Also included is Gary s idea for getting more club recognition in the community.
Demonstrator Gary Christensen Turning a Walking Cane Gary was working (volunteering?) at one of the Galleries in Melbourne for a while, but quit when the effort he put in out-weighed the benefits. While he was at church one day, he thought about making walking canes. He said there were a lot of elderly people walking around with ugly canes. So he decided to make some pretty ones from wood and donated them to those people. Below is a handout from Gary on how he makes walking canes. Share-the-Wealth Item
This is another handout from Gary. Thanks Gary for a great demonstration.
The Chapter s Purposes, in addition to supporting the general purposes of the AMERICAN ASSOCIATION of WOODTURNERS, Inc., are to: 1. Provide a meeting place for local woodturners 2. Share ideas and techniques regarding this craft 3. Trade woods 4. Exchange ideas about tools 5.Exhibit finished projects Officers: President: Russ Bremmer 321-698-1278 Vice President: Gary Christensen 321-951-1622 Secretary: Dotty Pugh 321-749-3760 Treasurer: Harvey Driver 321-757-8579 Web Master: Bill Howard 321-794-8993 E-mail: BillH@spacecoastwoodturners.com