ARPD, ARPG, ARPJ, ARPK, ARPM Surface Mount Fast Avalanche Rectifiers esmp Series DO-22AA (SMP) PRIMARY CHARACTERISTICS I F(AV). A V RRM 2 V, 4 V, 6 V, 8 V, V I FSM 3 A, 25 A t rr 4 ns, 2 ns V F.5 V,.4 V I R μa E AS 2 mj T J max. 75 C Package DO-22AA (SMP) Diode variation Single die FEATURES Very low profile - typical height of. mm Available Ideal for automated placement Glass passivated pellet chip junction Fast switching for high efficiency Low reverse current Meets MSL level, per J-STD-2, LF maximum peak of 26 C AEC-Q qualified Material categorization: for definitions of compliance please see /doc?9992 TYPICAL APPLICATIONS For use in fast switching rectification of power supply, inverters, converters, and freewheeling diodes for consumer, automotive, and telecommunication. MECHANICAL DATA Case: DO-22AA (SMP) Molding compound meets UL 94 V- flammability rating Base P/N-M3 - halogen-free, RoHS-compliant, and commercial grade Base P/NHM3 - halogen-free, RoHS-compliant, and automotive grade Terminals: Matte tin plated leads, solderable per J-STD-2 and JESD 22-B2 M3 suffix meets JESD 2 class 2 whisker test, HM3 suffix meets JESD 2 class 2 whisker test MAXIMUM RATINGS ( unless otherwise noted) PARAMETER SYMBOL ARPD ARPG ARPJ ARPK ARPM UNIT Device marking code ARD ARG ARJ ARK ARM Maximum repetitive peak reverse voltage V RRM 2 4 6 8 V Average forward current I F(AV). A Peak forward surge current ms single half sine-wave superimposed on rated load I FSM 3 25 A Non-repetitive avalanche energy at I AS =. A, E AS 2 mj Operating junction and storage temperature range T J, T STG -55 to +75 C Revision: 23-Feb-6 Document Number: 89289 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT /doc?9
Average Power Loss (W) ARPD, ARPG, ARPJ, ARPK, ARPM ELECTRICAL CHARACTERISTICS ( unless otherwise noted) PARAMETER TEST CONDITIONS SYMBOL ARPD ARPG ARPJ ARPK ARPM UNIT Maximum instantaneous.25.6 I forward voltage F =. A V () F T A = 25 C.5.4. Maximum reverse current Rated V R I (2) R T A = 25 C Maximum reverse recovery time I F =.5 A, I R =. A, I rr =.25 A t rr 4 2 ns Typical junction capacitance 4. V, MHz C J 2.5 8.5 pf Notes () Pulse test: 3 μs pulse width, % duty cycle (2) Pulse test: Pulse width 4 ms V μa THERMAL CHARACTERISTICS (T A = 25 c unless otherwise noted) PARAMETER SYMBOL ARPD ARPG ARPJ ARPK ARPM UNIT Typical thermal resistance R JA () 32 R JM () 5 Note () Free air, mounted on recommended copper pad area. Thermal resistance R JA - junction to ambient, R JM - junction to mount at the terminal cathode band C/W ORDERING INFORMATION (Example) PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE ARPJ-M3/84A.24 84A 3 7" diameter plastic tape and reel ARPJ-M3/85A.24 85A 3" diameter plastic tape and reel ARPJHM3/84A ().24 84A 3 7" diameter plastic tape and reel ARPJHM3/85A ().24 85A 3" diameter plastic tape and reel Note () Automotive grade RATINGS AND CHARACTERISTICS CURVES ( unless otherwise noted) Average Forward Rectified Current (A).2..8.6.4 Resistive or Inductive Load ARPK thru ARPM.2 T M Measured at Mount of Terminal 2 3 4 5 6 7 8 T M - Mount Temperature ( C) ARPD thru ARPJ.2..8.6.4.2 ARPD thru ARPJ D =.5 D =.8 D =.3 D =.2 D =. D =. T D = t p /T t p.2.4.6.8..2 Average Forward Current (A) Fig. - Maximum Forward Current Derating Curve Fig. 2 - Forward Power Loss Characteristics Revision: 23-Feb-6 2 Document Number: 89289 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT /doc?9
Average Power Loss (W) ARPD, ARPG, ARPJ, ARPK, ARPM.4.2..8.6.4.2 ARPK thru ARPM D =.5 D =.8 D =.3 D =.2 D =. D =. T D = t p /T t p.2.4.6.8..2 Average Forward Current (A) Instantaneous Reverse Current (μa) T A = 25 C. ARPD thru ARPJ. 2 3 4 5 6 7 8 9 Percent of Rated Peak Reverse Voltage (%) Fig. 3 - Forward Power Loss Characteristics Fig. 6 - Typical Reverse Characteristics Instantaneous Forward Current (A) T A = 25 C. ARPD thru ARPJ..3.5.7.9..3.5.7.9 Instantaneous Forward Voltage (V) Fig. 4 - Typical Instantaneous Forward Characteristics Instantaneous Reverse Current (μa). T A = 25 C ARPK thru ARPM. 2 3 4 5 6 7 8 9 Percent of Rated Peak Reverse Voltage (%) Fig. 7 - Typical Reverse Characteristics Instantaneous Forward Current (A) T A = 25 C. ARPK thru ARPM..3.5.7.9..3.5.7.9 Instantaneous Forward Voltage (V) Fig. 5 - Typical Instantaneous Forward Characteristics Junction Capacitance (pf) T J = 25 C f =. MHz V sig = 5 mv p-p ARPD thru ARPJ ARPK thru ARPM. Reverse Voltage (V) Fig. 8 - Typical Junction Capacitance Revision: 23-Feb-6 3 Document Number: 89289 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT /doc?9
Transient Thermal Impedance ( C/W) Junction to Ambient ARPD, ARPG, ARPJ, ARPK, ARPM.. t - Pulse Duration (s) Fig. 9 - Typical Transient Thermal Impedance PACKAGE OUTLINE DIMENSIONS in inches (millimeters) Cathode Band DO-22AA (SMP).2 (.3) REF..86 (2.8).74 (.88).53 (.35).4 (.5).36 (.9).24 (.6).3 (.35).4 (.).42 (3.6).26 (3.9).58 (4.).46 (3.7).2 (.3). (.).8 (.45).6 (.5).45 (.5).33 (.85). (2.54).3 (2.6).87 (2.2).5 (2.67).25.3 (.635) (.762).32 (.8).6 (.4).5 (.27) Revision: 23-Feb-6 4 Document Number: 89289 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT /doc?9
Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, Vishay ), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer s technical experts. Product specifications do not expand or otherwise modify Vishay s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. 27 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 8-Feb-7 Document Number: 9