WRIST SYSTEM. ARIX Volar Distal Radius Locking Plate System

Similar documents
Distal Radius System 2.5

LCP Pilon Plate 2.7/3.5

DISTAL RADIUS PLATES 3.5 mm / ANGULARLY STABLE. Distal radius plates 3,5 mm / angularly stable. Locking bone screws. Cortical bone screw

Technique Guide. LCP Pilon Plate 2.7/3.5

Small Fragment Locking Compression Plate (LCP ) System Stainless Steel and Titanium TECHNIQUE GUIDE

2.4 mm and 3.0 mm Headless Compression Screws

Ulna Shortening System 2.5

OPERATIVE TECHNIQUE RIVAL REDUCE FRACTURE PLATING SYSTEM. foot & ankle trauma procedures

Fibula Plating System

SpeedTip CCS 5.0, 7.0

Integra. Capture Screw System SURGICAL TECHNIQUE

Technique Guide. 2.4/2.7 mm Locking Tarsal Plates. Talus Plate, Navicular Plate and Cuboid Plate.

Distal Medial Tibia Plate Surgical Technique

SpeedTip CCS 5.0, 7.0

Instructions for Use. LCP Locking Compression Plate. Combine without Compromise.

MaxTorque. surgical technique. Cannulated Screw System. Foot & Ankle. OrthoHelix Technology

3.5 mm Cannulated Screw Technique Guide

Locking Small Fragment

Technique Guide. Quadrilateral Surface Plates 3.5. Part of the Low Profile Pelvic System 3.5.

The Percutaneous Reduction Forceps Technique Guide

Proximal Humerus Plate 3.5 Surgical Technique

1.5 MM LCP SYSTEM. For treatment of fractures and arthrodeses of canines and felines SURGICAL TECHNIQUE

LCP Pilon Plate 2.7/3.5

Proximal Humerus System 3.5

OPERATIVE TECHNIQUE RIVAL BITE HEADED CANNULATED AND HEADLESS COMPRESSION SCREWS. foot & ankle applications

Cannulated Screws Ø 3.5 mm / 4.5 mm

VLP FOOT Variable Angle Locked Plating System

Variable Angle LCP Forefoot/Midfoot System 2.4/2.7. Procedure specific plates for osteotomies, arthrodeses and fractures of the foot.

ACCS Anterior Cervical Compression System TECHNIQUE GUIDE

DLS Dynamic Locking Screw. Combined with LCP Locking Compression Plate.

Titanium Modular Hand System. For fractures, replantations and reconstruction of the hand.

Integra. Stainless Headed Compression Screw System SURGICAL TECHNIQUE

HCS 2.4/3.0. The countersinkable compression screw.

VARIABLE ANGLE LOCKING HAND SYSTEM

OPERATIVE TECHNIQUE RIVAL VIEW PLATING SYSTEM. foot & ankle reconstruction procedures

Vortex TRAUMATOLOGY. Vortex Distal Femur

Technique Guide. Occipito-Cervical Fusion System. Implants and instruments designed to optimize fixation to the occiput.

Technique Guide. 4.5 mm Cannulated Screws. Part of the Synthes Cannulated Screw System.

VARIABLE ANGLE LOCKING HAND SYSTEM

Small Plate and Screw System SURGICAL TECHNIQUE

Surgical Technique ANAX TM OCT. Spinal System

Technique Guide. Variable Angle LCP 1 st MTP Fusion Plates 2.4/2.7. Part of the Variable Angle LCP Forefoot / Midfoot System 2.4 / 2.7.

Aviator Anterior Cervical Plating System System Overview. Visual and tactile confirmation Increased Angulation Simplified instrumentation

Variable Angle LCP Mesh Plate 2.4/2.7. Part of the Variable Angle LCP Forefoot/Midfoot System 2.4/2.7.

Reflex Hybrid System Overview

5th Metatarsal Fracture System Surgical Technique

Part of the DePuy Synthes Cannulated Screw System. 3.5 mm Cannulated Screws

3.5 MM low-profile cortex screws

Universal Humeral Nail

6.5 mm and 7.3 mm Cannulated Screws Technique Guide

HCS 1.5. The countersinkable compression screw.

UJAM AA O RTHO PTY LTD 100 HYDE PARK C LO SE HYDE PARK 2196 W W W.UJAM AAO RTHO.C O M

Orthopedic Bone Nail System Universal Humeral Nail

2.4 mm Cannulated Screw. An integral part of the Synthes Cannulated Screw System (CSS).

Distal Volar Radius Plate Procedure Steps.

Surgical Technique 1

MTP Set SURGICAL TECHNIQUE

4.0 CANNULATED SCREW SYSTEM

VariAx Fibula Locking Plate System

ACLP Anterior Cervical Locking Plate System TECHNIQUE GUIDE

Technique Guide. 7.0 mm Cannulated Screws. Part of the Synthes Cannulated Screw System.

P O L A R I S. H a n d & F o o t. Headless Screw System PRODUCT INFORMATION

Technique Guide. Modular Sternal Cable System. Flexibility and strength in sternal closure and repair.

DART-FIRE. Small Screw System SURGICAL TECHNIQUE

DART-FIRE. Small Screw System SURGICAL TECHNIQUE

LCP Pilon Plate 2.7/3.5. Surgical Technique

CSLP Variable Angle. For Use with the Cervical Spine Locking Plate System TECHNIQUE GUIDE. Self-drilling Screw. Variable Screw Angulation

OsteoBridge IKA Intramedullary Knee Arthrodesis Fixation System. From the «BioBall Company» OsteoBridge Family

Technique Guide. Cable System. For Orthopaedic Trauma Surgery.

Contents. How to Use Selecting Plate Configuration Plate Handling Drilling Pilot Hole Plate Fixation

VariAx DistalFibula. Foot & Ankle. Locking Plate System. Operative Technique

TORNIER MAXLOCK EXTREME. Clavicle Plating System SURGICAL TECHNIQUE

Table of Contents 2-6. Introduction. Indications Surgical Technique. Ordering Information 15-24

VariAxFibula. Fibula Fractures. Locking Plate System. Operative Technique

VariAx Foot Locking Plate System

Fixation screw ENGLISH

BioDrive Micro Screw System

Technique Guide. Variable Angle LCP Opening Wedge Plates 2.4/2.7. Part of the Variable Angle LCP Forefoot / Midfoot System 2.4 / 2.7.

MatrixMANDIBLE Preformed Reconstruction Plates. Preshaped to the mandibular anatomy.

Distal Fibula Plate SURGICAL TECHNIQUE

Technique Guide. Synapse System. An enhanced set of instruments and implants for posterior stabilization of the cervical and upper thoracic spine.

Operative Technique Distal Fibula Fracture Repair Polyaxial Locking Technology Low Profile Design

Mecron Cannulated Screws

Variable Angle LCP Tarsal Plates 2.4/2.7. Navicular Plate and Cuboid Plates.

MEDIALMAX System SURGICAL TECHNIQUE

ISO Plate SURGICAL TECHNIQUE

DART-FIRE. Small Screw System SURGIC A L T ECHNIQUE

VECTRA. SURGICAL TECHNIQUE. Anterior cervical plate system. This publication is not intended for distribution in the USA.

Humeral Nail System Procedural Steps.

3.5 mm/2.7 mm LCP. Pancarpal Arthrodesis Plate. For treatment of carpal joints in dogs

URS Degen. Top loading pedicle screw system for posterior stabilization.

3.5 mm and 4.5 mm Curved Locking Compression Plates (LCP )

Lag Screw Device TECHNIQUE GUIDE. Indicated for symphyseal fracture fixation of the mandible. Instruments and implants approved by the AO Foundation

ORTHOLINK. 2 - Hole Wedge Osteotomy Plate SURGICAL TECHNIQUE

3.5 mm/ 2.7 mm LCP. PanCarPaL arthrodesis S PLate. BroCHUre. For treatment of carpal joints in dogs

Integra. Tibio Talo Calcaneus Plate SURGICAL TECHNIQUE

Occipito-Cervical Fusion System. Implants and instruments designed to optimize fixation to the occiput.

VECTRA SURGICAL TECHNIQUE. Anterior cervical plate system. This publication is not intended for distribution in the USA.

7.0 mm Cannulated Screws

Anterior Cervical Plate SURGICAL TECHNIQUE GUIDE. Surgeon Driven Innovation

Transcription:

WRIST SYSTEM A

Contents 3 4 7 14 15 16 19 21 Indications Product Overview Features & Benefits Ordering Information - Screws -2.5mm Self-Tapping Cortical Screws (Non-Locking) -2.5mm Self-Tapping Locking Screws Ordering Information - Plates -ARIX Volar Distal Radius Plates Ordering Information - Instruments Set Configuration Suggestion 2 ARIX WRIST SYSTEM

Indications is intended for use in temporary internal fixation and stabilization of fractures, osteotomies, and non-unions of the distal radius. 3

Product Overview Screw Specifications Screw Types Outer Diameter Length Insertion Types Screw Head Recess Color Material Locking Screw Cortical Screw (Non-Locking) Ø2.5mm 8 ~30mm Self-Tapping Hexagonal Silver Titanium Alloy Plate Specifications Distal Head Types Thickness Overall Length Head Width Color Material Guide Pin Hole Medium Large Extra Large 1.8mm 46mm and 73mm 19.6mm 23mm 27mm Blue Pure Titanium Gr.4 Ø1.3mm Color Coding Screws : Silver Plates : Blue Materials of Implants All plates are made from pure titanium material in conformity with ASTM F67. All screws are made from titanium alloy material in conformity with ASTM F136. The titanium is an ideal material for implant. It is biocompatible, corrosion resistant, and non-toxic in biological environment. 4 ARIX WRIST SYSTEM

Product Overview Screw Head Recess Self-retaining hexagonal recess for connection between screw head and screwdriver shaft Screw Options Cortical Screw (Non-Locking) Locking Screw Self-tapping Locking Screws : 8mm ~ 30mm Self-tapping Cortical Screws(Non-Locking) : 8mm ~ 30mm Outer Diameter : 2.5mm 5

Product Overview Plate Options 12 Volar Distal Radius Plates for Left and Right radiuses. 3 types of Distal Head as Medium, Large, and Extra Large 2 types of Shaft Length as 2 and 4 locking holes on the shaft Extra Large 6 ARIX WRIST SYSTEM Large Medium Extra Large Large Medium Large Extra Large Medium Large Extra Large

Lunate facet Radial styloid fragment Features and Benef its Anatomical Volar Plate Anatomical plate contour and screw trajectories for maximum support of lunate facet and stable fixation of radial styloid Minimal soft tissue irritation Minimal screw head prominence Rounded screw head Rounded plate edges to minimize soft tissue irritation Rounded screw head design and minimal screw head prominence in the plate to reduce the potential for soft tissue irritation. Low overall profile of the plate and screw construct for minimal soft tissue irritation. Rounded plate edges Low overall profile Anatomical 4 plane cutting for less soft tissue irritation 7

Features and Benef its Poly-Axial Locking System The poly-axial hole of a plate accepts locking or cortical screws as surgical needs. Locking screws as well as cortical screws can be inserted in ±15 with respect to the plate in any direction. Benefits of Locking Plating System ±15 Locking plate and screw system provides more stable fixation than conventional plate and screw system. Locking screws will not be loosened from the plate during the healing process. Locking screws do not rely on bone to plate compression. A fixed angle construct can be created by using locking screws in osteopenic bone or multifragmentary fractures where secure bone purchase with conventional screws may be compromised. 8 ARIX WRIST SYSTEM

Features and Benef its Oblong hole for accurate plate positioning The oblong hole in the plate shaft allows distal or proximal adjustment for accurate plate positioning on the bone. 1mm increment lines are marked beside oblong hole as a reference for plate positioning. Easy Plate Identification Distal head size information such as Medium / Large / Extra Large and Plate type information such as Left / Right Left or Right type are marked on plates for easy plate identification. Distal head size 9

Features and Benef its Guide Pin holes to approximate the trajectories of the distal screws with respect to radiocarpal joint Guide Pin holes for temporary plate fixation The Guide Pin holes of a plate accept up to 1.2mm Guide Pin. Guide Pin can be placed for temporary maintenance of bone reduction and provisional plate fixation. Guide Pin hole to approximate the trajectories of the ulna screws with respect to DRUJ Guide Pin holes for provisional fixation of plate. Intraoperative simplicity in choosing screws 2.5mm locking and cortical screws can be used in any holes of a plate for intraoperative simplicity 2.5mm 2.5mm 10 ARIX WRIST SYSTEM

Features and Benef its Drill Guide Block The drill guide blocks enable insertion of screws in the nominal trajectory of each locking hole. The scaled drill guide of 111-080 variable angle drill guide is necessary for the use of these blocks. Total 6 models in Medium/Large/Extra Large, and Left/Right plates. The drill guide blocks are made from radiolucent material. Fixed angle screw trajectories by drill guide blocks (Left type) [ 111-082-L, 111-083-L, 111-095-L ] Fixed angle screw trajectories by drill guide blocks (Right type) [ 111-082-R, 111-083-R, 111-095-R ] Distal 15 Radial 10 Distal 15 Ulnar 2 Distal 15 Ulnar 2 Distal 15 Radial 10 Distal 30 Radial 20 Distal 30 Radial 20 Distal 15 Ulnar 10 Distal 15 Ulnar 10 Distal 30 Radial 20 Distal 30 Radial 20 Distal 40 Radial 0 Distal 35 Ulnar 5 Distal 35 Ulnar 5 Distal 40 Radial 0 Radial side Ulnar side Ulnar side Radial side 11

Features and Benef its 15 Variable Angle Drill Guide Helps to drill pilot holes within the poly-axial range of ±15. 15 Scales are marked on the drill guide & bit for prompt depth measurement without the help of a depth gauge. The tip of the drill guide has locking mechanism to offer stable locking with the plate temporarily. To lock the drill guide with the plate, position(1) & turn(2) the drill guide slightly in clockwise as described picture. (1) (2) Fixed Angle Drill Sleeve Helps to drill a pilot hole in the nominal trajectory of each locking hole. Scales are marked on the drill guide & bit for prompt depth measurement without the help of a depth gauge. 12 ARIX WRIST SYSTEM

Features and Benef its Depth Gauge Determine the optimal screw length with the depth gauge. The triangular-prism shaped scale of depth gauge shows the exact length in any direction. * 3 scales for ease of reading Plate Bender If necessary, bend distal radius plate to suit the patients anatomical conditions using a pair of plate benders. With the plate benders, hold & bend the plate around the center window. NOTE : Do Not bend the plate more than 5. Further or Repetitive bending may break the plate. 13

Ordering Information - Screws 2.5mm Self-Tapping Cortical Screws (Non-Locking) [Unit: mm] No. Code Head Diameter (A) Outer Diameter (B) Length (L) 1 25-HF-008 8 2 25-HF-010 10 3 25-HF-012 12 A 4 25-HF-014 14 5 25-HF-016 16 6 25-HF-018 18 Ø3.7 Ø2.5 7 25-HF-020 20 L 8 25-HF-022 22 9 25-HF-024 24 10 25-HF-026 26 11 25-HF-028 28 B 12 25-HF-030 30 14 ARIX WRIST SYSTEM

Ordering Information - Screws 2.5mm Self-Tapping Locking Screws [Unit: mm] No. Code Head Diameter (A) Outer Diameter (B) Length (L) 1 161.032508 8 2 161.032510 10 3 161.032512 12 4 161.032514 14 5 161.032516 16 A 6 161.032518 18 Ø3.8 Ø2.5 7 161.032520 20 8 161.032522 22 9 161.032524 24 L 10 161.032526 26 11 161.032528 28 12 161.032530 30 B 15

Ordering Information Plates ARIX Volar Distal Radius Plates 25-DVRA-109-L Volar Distal Radius Locking Plate, Left, Medium, Head Width 19.6mm, Length 46mm, 9 Locking Holes, Thickness 1.8mm, Blue 25-DVRA-109-R Volar Distal Radius Locking Plate, Right, Medium, Head Width 19.6mm, Length 46mm, 9 Locking Holes, Thickness 1.8mm, Blue 25-DVRA-111-L Volar Distal Radius Locking Plate, Left, Medium, Head Width 19.6mm, Length 73mm, 11 Locking Holes, Thickness 1.8mm, Blue 25-DVRA-111-R Volar Distal Radius Locking Plate, Right, Medium, Head Width 19.6mm, Length 73mm, 11 Locking Holes, Thickness 1.8mm, Blue 16 ARIX WRIST SYSTEM

Ordering Information Plates 25-DVRA-209-L Volar Distal Radius Locking Plate, Left, Large, Head Width 23mm, Length 46mm, 9 Locking Holes, Thickness 1.8mm, Blue 25-DVRA-209-R Volar Distal Radius Locking Plate, Right, Large, Head Width 23mm, Length 46mm, 9 Locking Holes, Thickness 1.8mm, Blue 25-DVRA-211-L Volar Distal Radius Locking Plate, Left, Large, Head Width 23mm, Length 73mm, 11 Locking Holes, Thickness 1.8mm, Blue 25-DVRA-211-R Volar Distal Radius Locking Plate, Right, Large, Head Width 23mm, Length 73mm, 11 Locking Holes, Thickness 1.8mm, Blue 17

Ordering Information Plates 25-DVRA-309-L Volar Distal Radius Locking Plate, Left, Extra Large, Head Width 27mm, Length 46mm, 9 Locking Holes, Thickness 1.8mm, Blue 25-DVRA-309-R Volar Distal Radius Locking Plate, Right, Extra Large, Head Width 27mm, Length 46mm, 9 Locking Holes, Thickness 1.8mm, Blue 25-DVRA-311-L Volar Distal Radius Locking Plate, Left, Extra Large, Head Width 27mm, Length 73mm, 11 Locking Holes, Thickness 1.8mm, Blue 25-DVRA-311-R Volar Distal Radius Locking Plate, Right, Extra Large, Head Width 27mm, Length 73mm, 11 Locking Holes, Thickness 1.8mm, Blue 18 ARIX WRIST SYSTEM

Ordering Information Instruments 111-082-L Drill Guide Block, Medium, Left 111-082-R Drill Guide Block, Medium, Right 111-083-L Drill Guide Block, Large, Left 111-083-R Drill Guide Block, Large, Right 111-095-L Drill Guide Block, Extra Large, Left 111-095-R Drill Guide Block, Extra Large, Right 111-099 Fixed Angle Drill Sleeve for Ø2.0mm drill bit 113-HF-607 Hexagonal Screwdriver Shaft 111-068-2 Guide Pin Ø1.1mm for Ø1.3 guide pin hole 112-25-301 Drill Bit for 2.5mm screws, Ø2.0mm, Drilling length : 30mm, Overall length : 110mm, J-Latch 111-096 Dispenser for guide pins 19

Ordering Information Instruments 26.0240.17 Plate Bender 112-084 ARIX Volar Distal Radius Implant/Instrument Container 114-009 Grasping Forceps 111-080 Variable Angle Drill Guide for Ø2.0mm drill bit 111-092 Screwdriver Handle 111-075 Depth Gauge for 2.5mm screws 20 ARIX WRIST SYSTEM

Set Conf iguration Suggestion ARIX WRIST Ø2.5 Distal Radius Plate NO Code Description Set Quantity Implants _ Screws 1 161.032508 2.5 Locking Screw (8mm) 5 2 161.032510 2.5 Locking Screw (10mm) 5 3 161.032512 2.5 Locking Screw (12mm) 10 4 161.032514 2.5 Locking Screw (14mm) 10 5 161.032516 2.5 Locking Screw (16mm) 10 6 161.032518 2.5 Locking Screw (18mm) 10 7 161.032520 2.5 Locking Screw (20mm) 10 8 161.032522 2.5 Locking Screw (22mm) 10 9 161.032524 2.5 Locking Screw (24mm) 5 10 161.032526 2.5 Locking Screw (26mm) 5 11 161.032528 2.5 Locking Screw (28mm) 5 12 161.032530 2.5 Locking Screw (30mm) 5 13 25-HF-008 2.5 Cortical Screw (8mm) 5 14 25-HF-010 2.5 Cortical Screw (10mm) 5 15 25-HF-012 2.5 Cortical Screw (12mm) 10 16 25-HF-014 2.5 Cortical Screw (14mm) 10 17 25-HF-016 2.5 Cortical Screw (16mm) 10 18 25-HF-018 2.5 Cortical Screw (18mm) 10 19 25-HF-020 2.5 Cortical Screw (20mm) 10 20 25-HF-022 2.5 Cortical Screw (22mm) 10 21 25-HF-024 2.5 Cortical Screw (24mm) 5 22 25-HF-026 2.5 Cortical Screw (26mm) 5 23 25-HF-028 2.5 Cortical Screw (28mm) 5 24 25-HF-030 2.5 Cortical Screw (30mm) 5 NO Code Description Set Quantity Implants _ Plates 25 25-DVRA-109-R Medium, Length 46mm, Right 3 26 25-DVRA-109-L Medium, Length 46mm, Left 3 27 25-DVRA-111-R Medium, Length 73mm, Right 3 28 25-DVRA-111-L Medium, Length 73mm, Left 3 29 25-DVRA-209-R Large, Length 46mm, Right 3 30 25-DVRA-209-L Large, Length 46mm, Left 3 31 25-DVRA-211-R Large, Length 73mm, Right 3 32 25-DVRA-211-L Large, Length 73mm, Left 3 33 25-DVRA-309-R Extra Large, Length 46mm, Right 3 34 25-DVRA-309-L Extra Large, Length 46mm, Left 3 35 25-DVRA-311-R Extra Large, Length 73mm, Right 3 36 25-DVRA-311-L Extra Large, Length 73mm, Left 3 NO Code Description Set Quantity Instruments 37 111-092 Screwdriver Handle 2 38 111-075 Depth Gauge 1 39 112-25-301 Drill bit for 2.5mm screws 2 40 111-080 Variable Angle Drill Sleeve for Ø2.0mm drill bit 1 41 111-099 Fixed Angle Drill Sleeve for Ø2.0 drill bit 1 42 114-009 Grasping Forceps 1 43 113-HF-607 Hexagonal Screwdriver Shaft 2 44 111-082-R Drill Guide Block, Standard, Right 1 45 111-082-L Drill Guide Block, Standard, Left 1 46 111-083-R Drill Guide Block, Large, Right 1 47 111-083-L Drill Guide Block, Large, Left 1 48 111-095-R Drill Guide Block, Extra Large, Right 1 49 111-095-L Drill Guide Block, Extra Large, Left 1 50 26.0240.17 Bender 2 51 111-068-2 Guide Pin 10 52 111-096 Dispenser for guide pins 1 21

2.5 Distal Radius Plates and Screws 22 ARIX WRIST SYSTEM

The Instruments are subject to change without prior notice to improve. Instruments for 2.5 Distal Radius Plates and Screws 23

Publication_1601 JEIL MEDICAL CORPORATION 702 703 704 705 706 804 805 807 812-ho, 55, Digital-ro 34-gil, Guro-gu, Seoul, 08378, Rep. of Korea INTERNATIONAL SALES_ T 82.2.850.3898 F 82.2.850.3537 E global@jeilmed.co.kr DOMESTIC SALES_ T 82.2.850.3500 F 82.2.850.3535 E jeil@jeilmed.co.kr www.jeilmed.co.kr LBEN-M1601(03)

2024 © hobbydocbox.com Privacy Policy | Terms of Service | Feedback