SPB, SPD, SPG, SPJ, SPK, SPM High Current Density Surface Mount Glass Passivated Rectifiers esmp Series DO-22AA (SMP) FEATURES Very low profile - typical height of. mm Available Ideal for automated placement Glass passivated pellet chip junction Low forward voltage drop Low thermal resistance Meets MSL level, per J-STD-2, LF maximum peak of 26 C AEC-Q qualified Material categorization: for definitions of compliance please see www.vishay.com/doc?9992 PRIMARY CHARACTERISTICS I F(AV). A V RRM V, 2 V, 4 V, 6 V, 8 V, V I R μa V F.95 V T J max. 5 C Package DO-22AA (SMP) Diode variations Single die TYPICAL APPLICATIONS General purpose, polarity protection, and rail-to-rail protection in both consumer and automotive applications. MECHANICAL DATA Case: DO-22AA (SMP) Molding compound meets UL 94 V- flammability rating Base P/N-M3 - halogen-free, RoHS-compliant, and commercial grade Base P/NHM3 - halogen-free, RoHS-compliant, and automotive grade Terminals: Matte tin plated leads, solderable per J-STD-2 and JESD 22-B2 M3 suffix meets JESD 2 class A whisker test, HM3 suffix meets JESD 2 class 2 whisker test Polarity: Color band denotes the cathode end MAXIMUM RATINGS (T A = 25 C unless otherwise noted) PARAMETER SYMBOL SPB SPD SPG SPJ SPK SPM UNIT Device marking code SB SD SG SJ SK SM Max. repetitive peak reverse voltage V RRM 2 4 6 8 V Max. RMS voltage V RMS 7 4 28 42 56 7 V Max. DC blocking voltage V DC 2 4 6 8 V Average forward current I F(AV). A Peak forward surge current ms single half sine-wave superimposed on rated load I FSM 3 A Operating junction and storage temperature range T J, T STG -55 to +5 C Revision: 9-Feb-6 Document Number: 8897 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?9
Average Power Loss (W) www.vishay.com SPB, SPD, SPG, SPJ, SPK, SPM ELECTRICAL CHARACTERISTICS (T A = 25 C unless otherwise noted) PARAMETER TEST CONDITIONS SYMBOL SPB SPD SPG SPJ SPK SPM UNIT Max. instantaneous I F =. A V forward voltage (). F V I F =. A.95 Max. reverse current Rated V R I (2).. μa R 5 μa Typical reverse recovery time I F =.5 A, I R =. A, I rr =.25 A t rr.8 μs Typical junction capacitance time 4. V, MHz C J 6. pf Notes () Pulse test: 3 μs pulse width, % duty cycle (2) Pulse test: Pulse width 4 ms THERMAL CHARACTERISTICS (T A = 25 c unless otherwise noted) PARAMETER SYMBOL SPB SPD SPG SPJ SPK SPM UNIT Typical thermal resistance R () JC 2 Note () Thermal resistance from junction to ambient and junction to lead mounted on PCB with 5. mm x 5. mm copper pad areas. R JL is measured at the terminal of cathode band. R JC is measured at the top center of the body ORDERING INFORMATION (Example) Note () Automotive grade R JA () 5 R JL () 5 PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE SPJ-M3/84A.24 84A 3 7" diameter plastic tape and reel SPJ-M3/85A.24 85A 3" diameter plastic tape and reel SPJHM3/84A ().24 84A 3 7" diameter plastic tape and reel SPJHM3/85A ().24 85A 3" diameter plastic tape and reel RATINGS AND CHARACTERISTICS CURVES (T A = 25 C unless otherwise noted) C/W Average Forward Rectified Current (A).2..8.6.4.2 T L Measured at the Cathode Band Terminal 8 9 2 3 4 5 Lead Temperature ( C) Fig. - Max. Forward Current Derating Curve.2 D =.5 D =.8. D =.3 D =.2.8 D =. D =..6 T.4.2 D = t p /T t p.2.4.6.8..2 Average Forward Current Fig. 2 - Forward Power Loss Characteristics Revision: 9-Feb-6 2 Document Number: 8897 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?9
Transient Thermal Impedance ( C/W) www.vishay.com SPB, SPD, SPG, SPJ, SPK, SPM 3 Peak Forward Surge Current (A) 25 2 5 5 Junction Capacitance (pf) Number of Cycles at 5 Hz. Reverse Voltage (V) Fig. 3 - Max. Non-Repetitive Peak Forward Surge Current Fig. 6 - Typical Junction Capacitance Instantaneous Forward Current (A) T J = 5 C...4.6.8..2.4.6.8 2. Instantaneous Forward Voltage (V) Fig. 4 - Typical Instantaneous Forward Characteristics.. t - Pulse Duration (s) Fig. 7 - Typical Transient Thermal Impedance Instantaneous Reverse Current (μa) T J = 5 C.. 2 3 4 5 6 7 8 9 Percent of Rated Peak Reverse Voltage (%) Fig. 5 - Typical Reverse Leakage Characteristics Revision: 9-Feb-6 3 Document Number: 8897 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?9
SPB, SPD, SPG, SPJ, SPK, SPM PACKAGE OUTLINE DIMENSIONS in inches (millimeters) DO-22AA (SMP) Cathode Band.2 (.3) REF..86 (2.8).74 (.88).53 (.35).4 (.5).36 (.9).24 (.6).3 (.35).4 (.).42 (3.6).26 (3.9).58 (4.).46 (3.7).2 (.3). (.).8 (.45).6 (.5).45 (.5).33 (.85). (2.54).3 (2.6).87 (2.2).5 (2.67).25.3 (.635) (.762).32 (.8).6 (.4).5 (.27) Revision: 9-Feb-6 4 Document Number: 8897 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?9
Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, Vishay ), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer s technical experts. Product specifications do not expand or otherwise modify Vishay s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. 27 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 8-Feb-7 Document Number: 9