RESIDENTIAL HANGERS. ABBREVIATED CATALOG & BASE PRICE LIST RH-0608 (Cancels Base Price List RH-0308)

RESIDENTIAL HANGERS ABBREVIATED CATALOG & BASE PRICE LIST RH-0608 (Cancels Base Price List RH-0308)

CONSTRUCTION FASTENERS TERMS and CONDITIONS of SALE Effective 1-3-2007 1. PRICES & DESIGNS: Prices and designs are subject to change without notice. All prices are F.O.B. point of shipment, unless otherwise stated. 2. DELIVERY: Seller will make every effort to complete delivery of products as indicated on seller s acceptance of an order, but seller assumes no responsibility or liability, and will accept no back charge for loss or damage due to delay or inability to deliver caused by acts of God, war, labor difficulties, accident, delays of carriers, contractors or suppliers, inability to obtain materials, shortages of fuel and energy, or other causes of any kind beyond the control of seller. Under no circumstances shall seller be liable for any special or consequential damages or for loss, damage, or expenses directly or indirectly arising from delays or failure to give notice of delay. 3. SHIPMENTS: All products shipped will be carefully examined, counted, and packed. No claim for shortages will be allowed unless made in writing within ten (10) days of receipt of shipment. Claims for products damaged or lost in transit should be made on the carrier as seller s responsibility ceases and the title passes on delivery to the carrier. 4. FREIGHT: All prices are F.O.B. point of shipment. On shipments weighing 2500 pounds or more, rail freight or motor freight at the lowest published rate is allowed to all US rail points or all US highway points listed in published tariffs (Hawaii and Alaska excluded). 5. RETURNS: Seller cannot accept the return of any product unless its written permission has been first obtained. Credit will be allowed on the basis of the price charged for the merchandise less a standard handling charge of twenty percent (20%) and less any freight charges allowed or paid by seller. Material not in first class salable condition will be subject to the total cost of reconditioning. Special, non-standard, and made-to-order products (either published or unpublished) are non-cancelable / non-returnable. 6. PRODUCT APPLICATION: Seller s products are intended for installation and service as illustrated or described in seller s catalog. Seller shall not be responsible for any losses or damage sustained by the buyer or any other person as a result of misapplication. Buyer shall defend, indemnify and save seller harmless from any and all liability or alleged liability, expenses, including legal fees arising from personal injuries including death or damage to property caused by reason of improper and/or negligent installation of pipe hangers designed and fabricated by seller. In accordance with our product development program, we reserve the right to revise the design and application of our products without notification. For latest product information, please contact the nearest Carpenter & Paterson office. 7. WARRANTY: Carpenter & Paterson, Inc. warrants for one (1) year from date of shipment that all products of Carpenter & Paterson manufacture will be free from defects in material and workmanship when used for the purpose which Carpenter & Paterson recommends. Carpenter & Paterson warrants the products which it sells of other manufacturers only to the extent they are warranted to Carpenter & Paterson by the supplier. Claim for breach of the above warranty must be made within thirty (30) days from the date the material was determined by the Buyer to be defective or in any event within twelve (12) months from the date of delivery to the original users, unless otherwise stated. If Carpenter & Paterson deems to its satisfaction that the products are defective, the product will be repaired or replaced by Carpenter & Paterson, and no other charge will be allowed for labor or expense in repairing or replacing said product by the Buyer. In any event the amount of any adjustment shall not exceed the net sales price of the defective product. Where engineering design or fabrication work is supplied, Buyer s acceptance of Seller s design or delivery of work, shall relieve Carpenter & Paterson of all further obligation other than as expressed in Carpenter & Paterson s product warranty. The foregoing constitutes the Purchaser s sole and exclusive remedy under Carpenter & Paterson warranty. THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES EXPRESSED OR IMPLIED, INCLUDING ANY IMPLIED WARRANTY OF FITNESS OR FITNESS FOR A PARTICULAR PURPOSE. CARPENTER & PATERSON MAKES NO WARRANTY OF MERCHANTABILITY. IN NO EVENT AND UNDER NO CIRCUMSTANCES WILL CARPENTER & PATERSON BE LIABLE FOR PERSONAL INJURY OR PROPERTY DAMAGE ARISING IN ANY MANNER OUT OF THE USE OR APPLICATION OF THE GOODS. UNDER NO CIRCUMSTANCES AND IN NO EVENT WILL CARPENTER & PATERSON BE LIABLE FOR CONSEQUENTIAL, SPECIAL, OR INCIDENTAL DAMAGES WHETHER FOR BREACH OF CONTRACT OR WARRANTY, NEGLIGENCE, OR ANY OTHER TORTUOUS ACT OR OMISSION. The terms of this warranty can be modified or changed only by authorization in writing by an officer of Carpenter & Paterson, Inc. Carpenter & Paterson neither assumes, nor authorizes any person to assume for it any obligation in connection with the sale of its products or parts of products which have been repaired or altered outside of Sellers factory; subject to misuse, negligence, or accidents; or used in a manner contrary to the Seller s instructions or recommendations. Seller shall not be responsible for design errors due to inaccurate or incomplete information supplied by the Buyer, or its representative. Carpenter & Paterson, Inc. reserves the right to revise product design without notification. 8. TAXES: The amount of taxes applicable to the sale of material or services shall be added to the purchase price and shall be paid by buyer unless buyer provides seller with an exemption certificate acceptable to the taxing authorities. 9. PRICING INFORMATION: Orders of any size will be accepted. However, orders less than $150.00 will be subject to a $25.00 handling charge in addition to the cost of the material and freight, if any. Prices are subject to change without notice. We are not responsible for typographical errors. 10. TERMS: Net thirty (30) days; 1-1/2% per month service charge (18% per annum) will be charged on all delinquent accounts plus court costs and attorney fees.

TABLE OF CONTENTS PAGE SECTION I BANDS, SWIVELS, CLEVIS HANGERS & RISERS CLAMPS 4 SECTION II SPLIT RINGS, PLATES AND SIDE BEAMS 8 SECTION III PERFORATED HANGERS 10 SECTION IV TUBE CLIPS & STRAPS 12 SECTION V WIRE PIPE HOOKS & STUD PLATES 14 SECTION VI MULTI STRUT / PIPE ALIGNMENT 16 SECTION VII FASTENERS 18 SECTION VIII ANCHORS 21 SECTION IX SPECIALS 24 DISCOUNT SCHEDULE PRODUCT TYPE SECTION MULTIPLIER Residential Hangers I, II, III, IV, V Multistrut, Pipe Alignment VI Fasteners, Anchors VII, VII Specials, Other Catalogs IX Contact your nearest Carpenter & Paterson Sales Office for applicable discounts.

COPPER A BAND HANGER CARPENTER & PATERSON, INC. CT 1A CT Wgt. Box 1/2" $2.70 0.11 100 3/4" 2.81 0.11 100 1" 2.86 0.11 100 1-1/4" 3.14 0.12 100 1-1/2" 3.25 0.14 100 2" 3.41 0.16 100 2-1/2" 6.99 0.16 50 3" 7.26 0.38 50 3-1/2" 12.82 0.42 50 4" 12.93 0.45 25 COPPER SWIVEL RING COPPER CLEVIS HANGER CT 800 CT Wgt. Box 1/2" $3.74 0.11 100 3/4" 3.80 0.11 100 1" 3.85 0.11 100 1-1/4" 3.91 0.13 100 1-1/2" 3.96 0.13 100 2" 4.07 0.15 100 2-1/2" 10.89 0.16 50 3" 12.05 0.32 50 3-1/2" 15.02 0.35 25 4" 16.34 0.38 20 CT 100 CT Wgt. Box 1/2" $5.39 0.16 100 3/4" 5.94 0.16 100 1" 5.94 0.19 100 1-1/4" 6.38 0.22 100 1-1/2" 6.60 0.29 100 2" 7.59 0.32 100 2-1/2" 15.73 0.72 50 3" 16.34 0.82 50 3-1/2" 16.34 0.91 25 4" 18.10 1.07 25 Call your local sales office for additional residential hanger prices and availability 4

IPS A BAND HANGER IPS NFPA SWIVEL HANGER IPS CLEVIS HANGER CARPENTER & PATERSON, INC. IPS 1A 1A E 1A SS Wgt. Box Size Plain ElectroG Type 304 Each Quantity 1/2" $1.87 $2.60 $24.68 0.10 100 3/4" 1.93 2.66 25.41 0.10 100 1" 1.98 2.86 26.14 0.12 100 1-1/4" 2.09 2.97 27.59 0.12 100 1-1/2" 2.15 3.17 28.31 0.14 100 2" 2.26 3.43 29.77 0.16 100 2-1/2" 4.35 6.39 57.35 0.28 50 3" 4.57 7.34 60.26 0.38 50 3-1/2" 5.67 9.31 74.84 0.42 50 4" 6.77 11.15 89.36 0.60 25 IPS 800FP E Wgt. Box Size ElectroG Each Quantity 1/2" $1.76 0.09 100 3/4" 1.82 0.09 100 1" 1.87 0.09 100 1-1/4" 2.04 0.09 100 1-1/2" 2.09 0.10 100 2" 2.15 0.11 100 2-1/2" 3.85 0.19 50 3" 4.24 0.20 50 3-1/2" 6.93 0.28 25 4" 6.93 0.30 20 IPS 100 100 E 100 G 100 SS Wgt. Box Size Plain ElectroG Galv. Type 316 Each Quantity 1/2" $3.96 $5.29 $6.15 43.40 0.30 50 3/4" 4.02 5.48 6.21 47.52 0.30 50 1" 4.13 4.65 6.69 50.88 0.35 50 1-1/4" 4.40 6.05 7.33 53.52 0.40 50 1-1/2" 4.68 6.41 7.97 60.72 0.45 50 2" 5.61 7.66 9.41 70.90 0.52 50 2-1/2" 8.80 12.04 15.02 133.98 0.85 25 3" 10.89 14.90 18.94 166.82 1.10 25 3-1/2" 11.61 15.77 21.11 190.80 1.30 25 4" 13.31 18.19 23.55 214.56 1.40 20 Call your local sales office for additional residential hanger prices and availability 5

IPS PVC COATED A BAND HANGER IPS 1A PVC Wgt. Box Size Plain Each Quantity 1/2" $9.90 0.10 100 3/4" 10.12 0.12 100 1" 10.56 0.14 100 1-1/4" 11.00 0.16 100 1-1/2" 11.33 0.17 100 2" 14.25 0.32 100 2-1/2" 16.50 0.37 50 3" 18.15 0.57 50 3-1/2" 25.47 0.61 50 4" 27.78 0.70 25 IPS PVC COATED SWIVEL HANGER IPS 800 PVC Wgt. Box Size ElectroG Each Quantity 1/2" $8.31 0.11 100 3/4" 11.50 0.13 100 1" 12.32 0.13 100 1-1/4" 12.54 0.15 100 1-1/2" 14.41 0.17 100 2" 16.23 0.18 100 2-1/2" 17.71 0.34 50 3" 29.98 0.39 50 3-1/2" 56.98 0.42 25 4" 65.12 0.48 20 IPS PVC COATED CLEVIS HANGER IPS 100 PVC Wgt. Box Size Plain Each Quantity 1/2" $19.31 0.33 50 3/4" 19.36 0.38 50 1" 19.69 0.42 50 1-1/4" 20.74 0.47 50 1-1/2" 22.61 0.59 50 2" 23.16 0.64 50 2-1/2" 31.90 1.1 25 3" 34.54 1.20 25 3-1/2" 35.95 1.42 25 4" 37.79 2.10 20 Call your local sales office for additional residential hanger prices and availability 6

IPS D.W.V LIGHT DUTY PVC COATED RISER CLAMP IPS 126LD PVC Wgt. Box Size PVC Each Quantity 1-1/2" $22.61 0.62 25 2" 23.98 0.67 25 3" 26.51 0.88 20 4" 33.06 1.01 15 IPS D.W.V LIGHT DUTY RISER CLAMP IPS 126LD Wgt. Box Size Plain Each Quantity 1-1/2" $8.80 0.62 25 2" 9.24 0.67 25 3" 10.78 0.88 20 4" 11.44 1.01 15 COPPER RISER CLAMP IPS RISER CLAMP CT 126 CT Wgt. Box 1/2" $12.16 0.70 25 3/4" 12.76 0.74 25 1" 16.01 0.75 25 1-1/4" 16.06 0.77 25 1-1/2" 21.56 0.80 25 2" 22.55 0.84 25 2-1/2" 25.69 1.60 25 3" 29.76 1.80 25 3-1/2" 36.69 1.95 20 4" 38.67 2.04 15 IPS 126 126 E 126 G 126 SS Wgt. Box Size Plain ElectroG Galv. Type 316 Each Quantity 1/2" $11.44 $15.27 $18.76 $205.54 1.00 25 3/4" 11.50 15.35 19.54 208.56 1.08 25 1" 11.61 15.49 19.65 217.80 1.08 25 1-1/4" 14.47 19.31 23.24 237.49 1.16 25 1-1/2" 15.40 20.56 24.18 245.03 1.22 25 2" 16.01 21.37 25.51 264.55 1.30 25 2-1/2" 16.89 22.54 30.05 314.60 1.74 25 3" 17.88 23.86 32.51 322.91 1.98 20 3-1/2" 22.22 29.66 38.31 362.52 2.14 20 4" 22.55 30.10 39.37 369.49 2.28 15 *PVC COATED ALSO AVAILABLE Call your local sales office for additional residential hanger prices and availability 7

COPPER HINGED SPLIT RING CT 81RT CT Wgt. Box 1/4" $8.09 0.1 100 3/8" 8.14 0.12 100 1/2" 8.20 0.13 100 3/4" 8.97 0.15 100 1" 9.63 0.16 100 1-1/4" 9.08 0.19 100 1-1/2" 11.06 0.22 100 2" 13.04 0.27 100 2-1/2" 32.45 0.72 50 3" 44.50 1.07 25 4" 59.84 1.30 25 COPPER TWO SCREW SPLIT RING CT 81RT2 CT Wgt. Box 1/4" $8.17 0.1 100 3/8" 8.22 0.12 100 1/2" 8.28 0.13 100 3/4" 9.05 0.15 100 1" 9.72 0.16 100 1-1/4" 10.27 0.19 100 1-1/2" 11.17 0.22 100 2" 13.17 0.27 100 2-1/2" 32.77 0.72 50 3" 44.94 1.07 25 4" 60.44 1.30 25 COPPER CEILING PLATE Rod 85RT CT Wgt. Box 3/8" $6.77 0.19 100 1/2" 9.52 0.18 100 Call your local sales office for additional residential hanger prices and availability 8

IPS HINGED SPLIT RING IPS 81RT E 81RT 81RT SS Wgt. Box Size ElectroG Plain Type 316 Each Quantity 3/8" $9.74 $7.48 $53.52 0.16 100 1/2" 9.79 7.54 55.66 0.17 100 3/4" 10.62 8.20 57.15 0.20 100 1" 11.22 8.97 61.66 0.21 100 1-1/4" 14.03 10.78 67.71 0.29 100 1-1/2" 19.97 15.62 70.68 0.31 100 2" 26.79 20.96 99.28 0.35 100 2-1/2" 53.85 41.64 204.55 0.57 50 3" 64.19 49.45 228.64 0.72 25 4" 145.75 112.31 242.17 1.16 25 IPS TWO SCREW SPLIT RING IPS 81RT2 E 81RT2 Wgt. Box Size ElectroG Plain Each Quantity 3/8" $9.83 $7.55 0.16 100 1/2" 9.89 7.61 0.17 100 3/4" 10.72 8.28 0.20 100 1" 11.33 9.05 0.21 100 1-1/4" 14.17 10.89 0.29 100 1-1/2" 20.16 15.78 0.31 100 2" 27.05 21.16 0.35 100 2-1/2" 54.38 42.05 0.57 50 3" 64.83 49.94 0.72 25 4" 147.21 113.43 1.16 25 IPS CEILING PLATE Rod 85RT E 85RT 85RT SS Wgt. Box Size ElectroG Plain Type 316 Each Quantity 3/8" $6.66 $5.28 $45.10 0.19 100 1/2" 8.53 6.82 50.38 0.18 100 SIDE BEAM HANGER Rod 153 153 E Wgt. Box Size Plain ElectroG Each Quantity 3/8" $2.26 $3.21 0.13 100 1/2" 5.12 6.94 0.25 100 Call your local sales office for additional residential hanger prices and availability 9

MILFORD HANGER CT MPH Wgt. Box 1/2X6" $5.30 0.06 25 3/4X6" 5.48 0.07 25 1X6" 5.65 0.08 25 1-1/4X6" 9.87 0.09 25 1-1/2X6" 11.23 0.09 25 2X6" 12.68 0.10 25 1/2X12" 8.92 0.10 25 3/4X12" 9.31 0.10 25 1X12" 9.79 0.10 25 1-1/4X12" 12.52 0.11 25 1-1/2X12" 13.40 0.11 25 2X12" 15.48 0.12 25 NATICK HANGER CT NPH Wgt. Box 1/2X6" $5.65 0.06 25 3/4X6" 5.73 0.07 25 1X6" 5.83 0.08 25 1-1/4X6" 6.10 0.09 25 1-1/2X6" 6.45 0.09 25 2X6" 7.16 0.10 25 1/2X12" 6.98 0.10 25 3/4X12" 7.25 0.10 25 1X12" 7.43 0.10 25 1-1/4X12" 7.69 0.11 25 1-1/2X12" 7.96 0.11 25 2X12" 8.68 0.12 25 D.W.V. HANGER IPS DWV Wgt. Box Size ElectroG Each Quantity 1-1/2" $15.02 0.20 50 2" 21.51 0.22 50 3" 22.88 0.24 50 4" 23.98 0.26 50 Call your local sales office for additional residential hanger prices and availability 10

D.W.V. PVC COATED HANGER IPS DWV PVC Wgt. Box Size ElectroG Each Quantity 1-1/2" $15.73 0.20 50 2" 22.39 0.22 50 3" 24.53 0.24 50 4" 26.40 0.26 50 COPPER PERFORATED STRAPPING Prices shown are list prices per foot 3/4" 22GA Wgt. Feet Size Copper Per Roll Per Roll 10' $2.40 0.70 10 50' 2.57 3.50 50 100' 2.57 7.00 100 PERFORATED STRAPPING Prices shown are list prices per foot 3/4" 20GA 22GA 24GA Wgt. Feet Size Plain Plain Plain Per Roll Per Roll 10' $1.17 $1.10 $1.04 0.70 10 50' 1.34 1.27 1.21 3.50 50 100' 1.28 1.21 1.14 7.00 100 ZINC PERFORATED STRAPPING Prices shown are list prices per foot 3/4" 20GA 22GA 24GA Wgt. Feet Size ElectroG ElectroG ElectroG Per Roll Per Roll 10' $1.38 $1.21 $1.05 0.70 10 50' 1.55 1.38 1.22 3.50 50 100' 1.48 1.31 1.15 7.00 100 Call your local sales office for additional residential hanger prices and availability 11

COPPER VAN (BELL) HANGER CT 66 CT Wgt. Box 3/8" $6.88 0.07 25 1/2" 6.99 0.08 25 3/4" 7.26 0.08 25 1" 7.59 0.09 25 1-1/4" 8.97 0.09 25 1-1/2" 9.46 1.1 25 2" 9.89 1.42 25 COPPER TWO HOLE PIPE STRAP CT 72 CT Wgt. Box 1/4" $0.43 0.02 100 3/8" 0.44 0.02 100 1/2" 0.55 0.02 100 3/4" 0.61 0.02 100 1" 0.66 0.03 50 1-1/4" 0.94 0.03 50 1-1/2" 1.65 0.06 50 2" 1.87 0.08 50 IPS ZINC TWO HOLE PIPE STRAP CT 72 E Wgt. Box Size ElectroG Each Quantity 1/4" $0.83 0.02 100 3/8" 0.88 0.03 100 1/2" 1.05 0.04 100 3/4" 1.49 0.07 100 1" 1.87 0.09 100 1-1/4" 2.64 0.10 50 1-1/2" 2.86 0.14 50 2" 3.96 0.22 50 Call your local sales office for additional residential hanger prices and availability 12

PLASTIC 511 CT 511 Wgt. Box Size Plastic Each Quantity 1/2" $1.08 0.01 100 3/4" 1.19 0.01 100 1" 3.77 0.02 100 PLASTIC 513 CT 513 Wgt. Box Size Plastic Each Quantity 1/2" $0.75 0.02 100 3/4" 2.75 0.02 100 PLASTIC 515 CT 515 Wgt. Box Size Plastic Each Quantity 1/2" $2.23 0.01 100 3/4" 2.48 0.01 100 1" 6.86 0.02 100 PLASTIC 517 CT 517 Wgt. Box Size Plastic Each Quantity 1/2" $2.82 0.01 100 3/4" 3.07 0.01 100 1" 7.27 0.01 50 1-1/4" 8.56 0.02 50 1-1/2" 10.70 0.02 50 2" 14.56 0.03 50 Call your local sales office for additional residential hanger prices and availability 13

COPPER WIRE PIPE HOOKS CT 111 CT Wgt. Box Size Length Copper Each Quantity 1/2" X4" $2.74 0.06 25 1/2" X6" 3.45 0.08 25 1/2" X8" 4.50 0.10 25 1/2" X10" 5.74 0.12 25 1/2" X12" 6.45 0.14 25 3/4" X4" 2.74 0.06 25 3/4" X6" 3.45 0.08 25 3/4" X8" 4.69 0.10 25 3/4" X10" 5.74 0.12 25 3/4" X12" 6.45 0.14 25 1" X4" 3.00 0.06 25 1" X6" 3.61 0.08 25 1" X8" 4.95 0.10 25 1" X10" 6.01 0.12 25 1" X12" 6.62 0.14 25 1-1/4" X6" 3.98 0.10 25 1-1/4" X8" 4.50 0.12 25 1-1/4" X10" 5.74 0.14 25 1-1/4" X12" 6.62 0.16 25 1-1/2" X6" 4.50 0.10 25 1-1/2" X8" 5.21 0.12 25 1-1/2" X10" 5.82 0.14 25 1-1/2" X12" 6.62 0.16 25 2" X6" 4.74 0.10 25 2" X8" 6.49 0.12 25 2" X10" 7.87 0.14 25 2" X12" 8.67 0.16 25 3" X12" 9.55 0.17 25 4" X12" 10.50 0.17 25 STUD GUARD SG Wgt. Box Length ElectroG Each Quantity 3" $1.08 0.06 100 5" 1.42 0.09 100 6" 1.62 0.11 100 Call your local sales office for additional residential hanger prices and availability 14

IPS WIRE PIPE HOOKS PROTECTIVE PLATES PROTECTIVE PLATES CARPENTER & PATERSON, INC. IPS 111 Wgt. Box Size Length Plain Each Quantity 1/2" X4" $1.83 0.06 25 1/2" X6" 2.30 0.08 25 1/2" X8" 3.00 0.10 25 1/2" X10" 3.828 0.12 25 1/2" X12" 4.30 0.14 25 3/4" X4" 1.83 0.06 25 3/4" X6" 2.30 0.08 25 3/4" X8" 3.12 0.10 25 3/4" X10" 3.828 0.12 25 3/4" X12" 4.30 0.14 25 1" X4" 2.00 0.06 25 1" X6" 2.41 0.08 25 1" X8" 3.30 0.10 25 1" X10" 4.004 0.12 25 1" X12" 4.41 0.14 25 1-1/4" X6" 2.65 0.10 25 1-1/4" X8" 3.00 0.12 25 1-1/4" X10" 3.828 0.14 25 1-1/4" X12" 4.41 0.16 25 1-1/2" X6" 3.00 0.10 25 1-1/2" X8" 3.48 0.12 25 1-1/2" X10" 3.88 0.14 25 1-1/2" X12" 4.41 0.16 25 2" X6" 3.16 0.10 25 2" X8" 4.33 0.12 25 2" X10" 5.24 0.14 25 2" X12" 5.78 0.16 25 3" X12" 6.37 0.17 25 4" X12" 7.00 0.17 25 1-1/2"X FHA18 Wgt. Box Length ElectroG Each Quantity 9" $3.09 0.18 100 12" 3.85 0.25 100 18" 5.82 0.38 100 24" 10.27 0.41 100 3"X FHA18 Wgt. Box Length ElectroG Each Quantity 6" $3.77 0.25 100 9" 5.65 0.38 100 12" 7.20 0.50 100 18" 12.65 0.78 100 Call your local sales office for additional residential hanger prices and availability 15

Prices shown are list prices per foot MULTI STRUT Slotted Painted Wgt. Bundle M164 Gauge Pre Galv Green Per Foot Quantity 13/16" X 10' 14GA P.O.A. $6.04 1.03 500 13/16" X 20' 14GA P.O.A. $6.04 1.03 500 M134 1-5/8" X 10' 14GA P.O.A. 7.58 1.45 500 1-5/8" X 20" 14GA P.O.A. 7.58 1.45 500 M132 1-5/8" X 10' 12GA P.O.A. 8.56 1.94 500 1-5/8" X 20" 12GA P.O.A. 8.56 1.94 500 *DIFFERENT SIZES, FINISHES AND CONFIGURATIONS AVAILABLE UPON REQUEST PIPEFIX POSIFIX STAKFIX SUMNER PIPE ALIGNMENT Wgt. Box Model Plastic Each Quantity PIPEFIX $59.68 0.05 50 POSIFIX 57.48 0.07 50 STAKFIX 63.03 0.09 50 Call your local sales office for additional residential hanger prices and availability 16

HOLDRITE #101 HOLDRITE #102 HOLDRITE #107 HOLDRITE #108 HOLDRITE #114 CT Wgt. Box H101-18 1/2" $27.35 0.70 50 H101-18R 1/2&3/4" 29.45 0.70 50 H101-26 3/4&1" 40.76 0.90 50 CT Wgt. Box H102-18 7/8,1-1/8" $27.35 0.70 50 H102-26 3/4,1" 39.65 0.90 50 CT Wgt. Box H107-18 1/2,3/4,1" $27.35 0.70 50 H107-26 1/2.3/4,1,1-1/4" 41.0113 0.90 50 CT Wgt. Box H108-20 1/2,3/4,1" $27.35 0.75 50 H108-26 1/2,3/4,1" 41.0113 0.90 50 CT Wgt. Box H114-C 1" $97.94 0.7 6 H114-CO 1" 97.94 0.7 6 H114-CR 1" 97.94 0.7 6 H114-EXT 63.26 0.6 6 HOLDRITE METAL STUD INSULATORS CT Wgt. Box Size Plastic Each Quantity H404R 1/2" $3.35 0.03 100 H405R 3/4" 3.35 0.03 100 H406R 1" 3.35 0.04 100 Call your local sales office for additional residential hanger prices and availability 17

FINISHED HEX NUTS HEAVY HEX NUTS STANDARD ROUND WASHER LOCK WASHER, SPLIT FENDER WASHER, CS CARPENTER & PATERSON, INC. Nut 165 165 E 165 SS304 Wgt. Box Size Plain ElectroG Type 304 Each Quantity 1/4" $1.19 $1.45 $1.54 0.01 100 5/16" 1.25 1.56 1.93 0.02 100 3/8" 1.32 1.61 2.31 0.02 100 1/2" 1.38 1.89 5.54 0.04 50 Nut 165H 165H E 165H SS304 165H SS316 Wgt. Box Size Plain ElectroG Type 304 Type 316 Each Quantity 1/4" $1.34 $1.61 $3.23 $3.88 0.03 100 5/16" 1.42 1.69 3.44 4.02 0.05 100 3/8" 1.49 1.78 3.71 4.13 0.07 100 1/2" 2.86 3.38 6.98 7.76 0.12 50 Bolt/Rod Fig. 103 Fig. 103E Fig.103G 103 SS316 Wgt. Box Size Plain ElectroG HD Galv. Type 316 Each Quantity 1/4" $0.30 $0.37 P.O.A. $0.54 0.01 100 5/16" 0.37 0.45 P.O.A. 0.67 0.01 100 3/8" 0.50 0.58 P.O.A. 0.79 0.02 50 1/2" 0.74 1.02 P.O.A. 1.60 0.04 25 Bolt/Rod 176 176 E 176 SS Wgt. Box Size Plain Electro G Type 304 Each Quantity 1/4" $1.16 $1.23 $2.05 0.01 100 5/16" 1.38 1.45 2.55 0.01 100 3/8" 1.76 2.13 3.01 0.05 100 1/2" 2.04 2.47 6.06 0.06 50 8 8 E 8 G Wgt. Box Size Plain ElectroG HD Galv. Each Quantity 1/4 x 1-1/4" $0.43 $0.54 P.O.A. 0.02 100 3/8 x 1-1/2" 0.54 0.65 P.O.A. 0.03 100 1/2 x 2" 0.71 0.84 P.O.A. 0.06 50 Call your local sales office for additional residential hanger prices and availability 18

ALL THREAD ROD Prices shown are list prices per foot 94 94 E 94 SS304 94 SS316 Wgt. Standard Black / Electro- Stainless Stainless Per 6' Tube Rod Size Plain Galv. Type 304 Type 316 Ft. Quantity 1/4" $2.42 $3.63 $14.74 $23.00 0.12 300 5/16" 2.53 4.35 23.43 38.71 0.20 210 3/8" 2.59 5.12 31.46 49.19 0.30 150 1/2" 4.07 8.58 55.00 86.04 0.54 90 HEX HEAD MACHINE BOLTS (Grade A) BLT BLT E BLT G BLT SS304 BLT SS316 Approx. Standard Plain / Electro Hot Dip Stainless Stainless Weight Carton Size Black Galv. Galv. Type 304 Type 316 Each Quantity 1/4 x 1" $0.23 $0.34 $0.57 $0.98 $1.47 0.017 3,600 1/4 x 1-1/4" 0.27 0.41 0.68 1.18 1.77 0.020 2,800 1/4 x 1-1/2" 0.32 0.49 0.81 1.41 2.12 0.024 2,400 1/4 x 2" 0.42 0.63 1.05 1.82 2.74 0.031 1,600 3/8 x 1" 0.54 0.81 1.35 2.35 3.53 0.040 1,500 3/8 x 1-1/4" 0.65 0.97 1.62 2.82 4.24 0.048 1,300 3/8 x 1-1/2" 0.74 1.12 1.86 3.24 4.86 0.055 1,000 3/8 x 2" 0.93 1.40 2.33 4.06 6.09 0.069069 800 1/2 x 1" 1.12 1.69 2.81 4.88 7.33 0.083 750 1/2 x 1-1/4" 1.26 1.89 3.15 5.47 8.21 0.093 650 1/2 x 1-1/2" 1.41 2.11 3.52 6.12 9.18 0.104 600 1/2 x 2" 1.80 2.70 4.50 7.83 11.74 0.133 450 STEEL LAG ROD 28 28 G Wgt. Box Plain Galv. Each Quantity 3/8" x 4" $7.76 $8.71 0.13 100 x 6" 8.20 9.58 0.19 100 x 8" 8.64 10.46 0.25 100 x 10" 9.30 11.64 0.32 100 x 12" 9.96 12.73 0.38 100 1/2" x 4" 11.99 13.67 0.23 100 x 6" 12.65 15.14 0.34 100 x 8" 13.64 16.86 0.44 50 x 10" 14.30 18.40 0.56 50 x 12" 14.96 19.86 0.67 50 STEEL DRIVE SCREW 166 Wgt. Box Plain Each Quantity #12-1-1/2" $0.94 0.02 100 #16-2" $1.32 0.04 100 Call your local sales office for additional residential hanger prices and availability 19

STANDARD STEEL U-BOLTS CARPENTER & PATERSON, INC. 283 283 E Wgt. Box Pipe Size Plain Electro G Each Quantity 1/2" $4.79 $5.59 0.11 100 3/4" 4.84 5.72 0.12 100 1" 5.39 6.27 0.12 100 1-1/4" 6.16 8.21 0.28 100 1-1/2" 6.82 9.01 0.30 100 2" 6.93 9.34 0.33 100 2-1/2" 11.50 16.62 0.70 50 3" 12.10 17.81 0.78 50 U-Bolts supplied 3-1/2" 12.65 18.79 0.8 25 with 4 -nuts 4" 12.76 19.34 0.9 25 TOGGLE BOLT WITH WING 59 E Wgt. Box Electro G Each Quantity 3/16" x 4" $2.42 0.05 25 3/16" x 5" 2.53 0.06 25 3/16" x 6" 2.64 0.06 25 1/4" x 4" 2.64 0.08 25 1/4" x 5" 3.19 0.09 25 1/4" x 6" 3.58 0.10 25 3/8" x 4" 6.44 0.19 25 3/8" x 5" 6.93 0.22 25 3/8" x 6" 8.25 0.24 25 1/2" x 4" 26.40 0.32 25 1/2" x 6" 30.03 0.40 25 STEEL COACH SCREW 107 107 E 107 G Wgt. Box Plain ElectroG HD Galv Each Quantity 1/4" X 1-1/2" 2.59 2.80 4.21 0.03 100.00 1/4" X 2" 3.25 3.54 5.31 0.04 100.00 1/4" X 2-1/2" 3.69 3.98 5.97 0.04 100.00 1/4" X 3" 4.18 4.47 6.71 0.04 100.00 3/8" X 1-1/2" 3.41 3.85 5.77 0.06 100.00 3/8" X 2" 4.07 4.58 6.87 0.07 100.00 3/8" X 2-1/2" 4.35 4.93 7.40 0.08 100.00 3/8" X 3" 5.28 6.01 9.02 0.10 100.00 1/2" X 1-1/2" 6.34 6.77 10.15 0.12 100.00 1/2" X 2" 5.83 6.85 10.28 0.14 100.00 1/2" X 2-1/2" 6.66 7.83 11.74 0.16 100.00 1/2" X 3" 8.20 9.51 14.27 0.18 100.00 Call your local sales office for additional residential hanger prices and availability 20

DROP-IN CONCRETE ANCHORS CARPENTER & PATERSON, INC. CS Smooth 514 Wgt. Box Size CS-Zinc Each Quantity 1/4"-20 $2.22 0.020 100 3/8"-16 2.83 0.060 50 1/2"-13 5.22 0.120 50 CS Lipped 514L Wgt. Box Size CS-Zinc Each Quantity 1/4"-20 $3.20 0.020 100 3/8"-16 4.24 0.060 50 1/2"-13 6.42 0.120 50 SS Smooth 514 SS303 514 SS316 Wgt. Box Size Type 303 Type 316 Each Quantity 1/4"-20 $17.08 $40.04 0.020 100 3/8"-16 32.99 61.16 0.060 50 1/2"-13 53.57 117.24 0.120 50 CS Mini DROP IN SETTING TOOLS 514S Wgt. Box Size CS-Zinc Each Quantity 3/8"-16 $4.65 0.015 100 1/2"-13 10.17 0.015 50 Price each Setting Size Tool 1/4" $30.46 3/8" 39.94 1/2' 44.67 Call your local sales office for additional residential hanger prices and availability 21

WVH WOOD VERTICAL HANGER Rod Unit Shank Shank Actual Wgt. Box Size Price Item Number Length Dia Pullout Box Quantity 1/4" $5.82 WVH1/4X2 2" 1/4" 1500#-Fir 6.5 100 3/8" 6.16 WVH3/8X1 1" 1/4" 1500#-Fir 4.8 100 3/8" 6.22 WVH3/8X2 2" 1/4" 1500#-Fir 6.0 100 3/8" 6.77 WVH3/8X2-1/2 2-1/2" 1/4" 2000#-Fir 9.1 100 3/8" 7.78 WVH3/8X3 3" 1/4" 2000#-Fir 9.2 100 3/8" 7.86 WVH3/8X4 4" 3/8" 2500#-Fir 9.5 100 1/2" 8.46 WVH1/2X2-1/2 2-1/2" 3/8" 2500#-Fir 10.0 100 WSH WOOD SIDE HANGER Rod Unit Shank Shank Actual Wgt. Box Size Price Item Number Length Dia Pullout Box Quantity 1/4" $6.77 WSH1/4X1 2" 1/4" 1675#-Fir 8.0 100 3/8" 7.11 WSH3/8X1 1" 1/4" 875#-Fir 6.0 100 3/8" 7.24 WSH3/8X2 2" 1/4" 1675#-Fir 7.0 100 3/8" 9.07 WSH3/8X2-1/2 2-1/2" 3/8" 1675#-Fir 10.3 100 CVH CONCRETE VERTICAL HANGER Rod Unit Shank Shank Actual Wgt. Box Size Price Item Number Length Dia Pullout Box Quantity 1/4" $5.82 CVH1/4X1-1/4 1-1/4" 1/4" N/A 6.8 100 3/8" 7.11 CVH3/8X1-1/2 1-1/2" 1/4" N/A 6.3 100 1/2" 12.04 CVH1/2X2-3/4 2-3/4" 3/8" NA 3.5 50 SVH STEEL VERTICAL HANGER Rod Unit Thickness Actual Wgt. Box Size Price Item Number Screw Description Range Pullout Box Quantity 1/4" $6.16 SVH1/4X1 1/4-20x1".036" -.188" 975#/16ga 5.3 100 3/8" 6.30 SVH3/*X1-1/2 1/4-20x2".036" -.188" 975#/16ga 5.8 100 3/8" 6.43 SVH3/8X2 1/4-20x1".036" -.188" 1675#/16ga 5.3 100 3/8" 6.63 SVHN3/8X1 1/4-20x1-1/2" w/nut.036" -.188" 975#/16ga 5.3 100 3/8" 8.67 SVHN3/8X1-1/2 1/4-20x1-1/2" w/nut.036" -.188" 1675#/16ga 5.5 100 1/4" 8.32 TVHN1/4X1-1/2 12-24x1-1/2 w/nut 3/16" - 1/2" 875#/16ga 5.5 100 3/8" 8.46 TVHN3/8X1-1/2 12-24x1-1/2" w/nut 3/16" - 1/2" 875#/16ga 5.5 100 1/2" 9.01 TVHN1/2X1-1/2 12-24x1-1/2" w/nut 3/16" - 1/2" 875#/16ga 6.0 100 SSH STEEL SIDE HANGER Rod Unit Thickness Actual Wgt. Box Size Price Item Number Screw Description Range Pullout Box Quantity 1/4" $7.45 SSHN1/4X1 1/4-20x1".036" -.188" 975#/16ga 6.0 100 3/8" 7.65 SSHN3/8x1 1/4-20x1" w/nut.036" -.188" 1675#/16ga 7.3 100 3/8" 7.92 SSHN3/8X1-1/2 1/4-20x1-1/2" w/nut.036" -.188" 975#/16ga 7.0 100 3/8" 8.59 SSHN3/8X2 1/4-20x1-1/2" w/nut.036" -.188" 1675#/16ga 5.3 100 1/4" 9.01 TSHN1/4X1-1/2 12-24x1-1/2 w/nut 3/16" - 1/2" 875#/16ga 5.5 100 1/2" 9.41 TSHN3/8X1-1/2 12-24x1-1/2" w/nut 3/16" - 1/2" 875#/16ga 6.0 100 Call your local sales office for additional residential hanger prices and availability 22

NUT DRIVER Rod Unit Catalog Size Price Model 1/4"-1/2" $69.58 NDI 1/4" 69.58 ND2 3/8" 69.58 ND3 1/2" 69.58 ND4 Description Universal Steel & Wood Socket 1/4" Concrete Socket 3/8" Concrete Socket 1/2" Concrete Socket CARBIDE DRILL BITS Price each Carbide Size Drill Bit 5/32" X 6" $38.58 3/16" X 4" 31.68 3/16" X 6" 33.43 3/16" X 8" 50.49 3/16" X 10" 84.46 7/32" X 6 52.12 7/32" X 8" 67.41 7/32" X 10" 84.46 1/4" X 4" 28.56 1/4" X 6" 28.56 1/4" X 8" 40.06 1/4" X 11" 116.67 5/16" X 6" 46.97 3/8" X 6" 43.45 1/2" X 6" 55.63 5/8" X 8" 98.14 5/8" X 12" 237.42 HAMMER SET ANCHOR Prices shown are per box HAS Drill Wgt. Box Size Anchors Size Box Quantity 3/16" X 7/8" $125.40 3/16" 0.75 100 1/4" X 3/4" 133.10 1/4" 1.50 100 1/4" X 1" 141.90 1/4" 1.75 100 1/4 X 1-1/4" 156.20 1/4" 2.25 100 1/4" X 1-1/2" 193.60 1/4" 2.50 100 1/4" X 2" 261.80 1/4" 3.00 100 1/4" X 3" 304.70 1/4" 4.00 100 SELF DRILLING WALLBOARD ANCHOR Prices shown are per box Wall Wgt. Box Anchor Each Quantity EZ Zinc $402.93 0.94 100 EZP Plastic 380.16 0.86 100 Call your local sales office for additional residential hanger prices and availability 23

SPECIALS, SPECIALS AND MORE SPECIALS Our manufacturing facilities are equipped with a number of different machines for manufacturing special hangers. In addition, we have a substantial network of hanger suppliers, both domestic and international, which allows us to service all of your hanger needs. If you don't see what you are looking for in our abbreviated Residential Hanger Catalog, please call your nearest Carpenter & Paterson sales office for assistance. Additional Catalogs and Price Lists available Call your local sales office for additional residential hanger prices and availability 24

NOTES Call your local sales office for additional residential hanger prices and availability Blank

C&P RESIDENTIAL HANGERS CONTACT YOUR NEAREST CARPENTER & PATERSON LOCATION AT: SALES OFFICES AND MASSACHUSETTS NEW JERSEY (North) WAREHOUSES: 225 Merrimac Street 369 Jefferson Avenue Woburn, MA 01801 Saddle Brook, NJ 07663 Telephone: (781) 935-2950 Telephone: (973) 772-1800 Fax: (781) 935-7664 Fax: (973) 772-1800 MARYLAND NEW JERSEY (South) 8941 D'Arcy Road 3900 River Road Upper Marlboro, MD 20774 Pennsauken, NJ 08110 Telephone: (301) 333-4631 Telephone: (856) 488-1988 Fax: (301) 333-4638 Fax: (856) 488-0824 PENNSYLVANIA 484 Galiffa Drive Donora, PA 15033 Telephone: (724) 379-8461 Fax: (724) 379-8463 MANUFACTURING PLANTS: NEW JERSEY 369 Jefferson Avenue Saddle Brook, NJ 07663 Telephone: (973) 772-1800 Fax: (973) 772-1800 PENNSYLVANIA 484 Galiffa Drive Donora, PA 15033 Telephone: (724) 379-8461 Fax: (724) 379-8463 EXECUTIVE OFFICES CARPENTER & PATERSON, INC. 225 Merrimac Street, Woburn, MA 01801 Tel: (781) 935-2950 Fax: (781) 935-7664 e-mail: cpsales@carpenterandpaterson.com www.carpenterandpaterson.com CARPENTER & PATERSON, INC.,