WSCG SERIES #8 Deck/Dock Wood-to-Wood # Undersized square drive BITSU N000 coating S WSCG134S 1³ ₄" 000 X X X X Recommended: Attachments above / Also: 00 WSNTLQ SERIES #8 Deck/Dock Wood-to-Wood #3 Undersized square drive BIT3SU Twin threads Quik Guard coating WSNTLG SERIES #8 Deck/Dock Wood-to-Wood #3 Undersized square drive BIT3SU Twin threads N000 coating Standard S S WSNTLQ134S 1³ ₄" 000 X X X X X WSNTLQ2S 2" 000 X X X X X WSNTLQ212S ¹ ₂" 1500 X X X WSNTLQ3S 3" 1000 X X WSNTLG2S 2 2" 000 1000 X X X X X WSNTLG212S 2 2¹ ₂" 1500 750 X X X WSNTLG3S 3" 1000 500 X X 1. Order cartons with an "HCK" prefix before the model number, example: HCKWSNTLGS. Listed in ICC-ES ER-5053 59
WSCTC SERIES #8 Deck/Dock Wood-to-Wood #3 Undersized square drive BIT3SU Twin threads TufCote coating WSCTC212S ¹ ₂" 1500 X X X SS3DSC SERIES #10 Deck/Dock Wood-to-Wood #3 Square drive BIT3S Available in 305 & 316 stainless steel Material SS3DSC212BS 2¹ ₂" 305 SS 1500 X X SS3DSC212BS316 2¹ ₂" 316 SS 1500 X X SS3DSC3BS 3" 305 SS 1000 X X SS3DSC3BS316 3" 316 SS 1000 X X DTHQ SERIES #8 Deck/Dock Wood / Composite Decking-to-Wood # Undersized square drive BITSU Trim head Quik Guard coating Standard S DTHQ2S 2" 000 1000 X X X X X DTHQ212S 2¹ ₂" 1500 750 X X X DTHQ3S 3" 1000 500 X X Order cartons with an "HCK" prefix before the model number, example: HCKDTHQS 60
SSDTH SERIES #7 Deck/Dock Wood / Composite Decking-to-Wood Box threads Trim head 305 Stainless steel Standard SSDTH2S 2" 000 - X X X SSDTH212S 2¹ ₂" 1000 500 X X X SSDTH3S 3" 1000 500 X X Order cartons with an "HCK" prefix before the model number, example: HCKSSDTH1S DCL/SSDCL SERIES Composi-Lok, Deck/Dock Composite Decking-to-Wood # Undersized square drive BITSU #9 Diameter Cap head Quik guard coating Available in 4 colors and 305 stainless steel (see table) Standard Gray DCLG212S 2¹ ₂" 1000 500 X X X Tan DCLT212S 2¹ ₂" 1000 500 X X X Red DCLR212S 2¹ ₂" 1000 500 X X X Brown DCLB212S 2¹ ₂" 1000 500 X X X 305 Stainless SSDCL212S 2¹ ₂" 1000 500 X X X 305 Stainless SSDCL3S 3" 1000 500 X X Gray DCLG3S 3" 1000 500 X X Tan DCLT3S 3" 1000 500 X X WSC SERIES #8 Wood-to-Wood coarse threads WSC114S-17 Features nibs under the head for easy Available with type 17 and sharp points flat head Yellow zinc dichromate Red DCLR3S 3" 1000 500 X X Brown DCLB3S 3" 1000 500 X X Order cartons with an "HCK" prefix before the model number, example: HCKDCLG1S Type S WSC114S-17 1¹ ₄" Type 17 500 X X X WSC112S 1¹ ₂" Sharp 000 X X X X 61
WSCLT SERIES #8 Wood-to-Wood Yellow zinc dichromate coating Fully threaded S WSCLT134S 1³ ₄" 000 X X X X X WSNTL SERIES #8 Wood-to-Wood Subflooring / Sheathing / Wall Plates / Stair Treads #3 Square drive BIT3S Twin threads Available with type 17 and sharp points Yellow zinc dichromate coating Recommended by Huber for Advantech flooring Advantech is a registered trademark of Huber Engineered Woods. PHSS SERIES #8 Wood / Light Gauge Steel-to-Wood Twin threads Pan head Yellow zinc dichromate coating Type Standard S WSNTL134S 1³ ₄" Sharp 000 1000 X X X X X WSNTL2LS 2 2" Sharp 000 1000 X X X X X WSNTL2LS-17 2" Type 17 000 X X X X X WSNTL212S 2 2¹ ₂" Sharp 1500 750 X X X WSNTL3S 3" Sharp 1000 500 X X 1. Order cartons with an "HCK" prefix before the model number, example: HCKWSNTL134S. Listed in ICC-ES ER-5053 3. See page 71 for WSNTL ", ½" Load Tables PHSS2S 2" 000 X PHSS212S 2¹ ₂" 1500 X 6 For more information on corrosion, see pages 8 9.
PPSD SERIES #8 Wood-to-Steel Subflooring/Sheathingto-Steel (Maximum steel thickness: 54 mils / 16 ga) #3 Square drive BIT3S Fine threads Pilot point Yellow zinc dichromate coating.315" head diameter meets AISI lateral design standard S PPSD11516S 8 1¹⁵ ₁₆" 18 000 X X X X X = threads per inch MTH SERIES #7 Underlayment Wood Underlayment-to-Wood Hi-Lo threads Trim head Available with yellow zinc dichromate and gray phosphate coatings CB3BLG SERIES #10 Tile Underlayment Fiber-Cement Board-to-Wood #3 Undersized square drive BIT3SU Available with coarse and hi-lo threads Nibs under the head for easier.375" ribbed wafer head C-3 coating Coating Standard S MTHZ1S 1" Yellow Zinc 500 X MTH114S 1¹ ₄" Gray Phosphate 500 1000 X X Order cartons with an "HCK" prefix before the model number, example: HCKMTH114S Type Standard LDH CB3BLG114S 10 1¹ ₄" 10 Type 17 1500 500 X X CB3BLGHL114S 9 1¹ ₄" 15 Hi-Lo Sharp 1500 500 X X CB3BLG112S 10 1¹ ₂" 10 Type 17 1500 500 X X CB3BLG158S 10 1⁵," 10 Type 17 1500 500 X X CB3BLGHL158S 9 1⁵," 15 Hi-Lo Sharp 1500 500 X X CB3BLG134S 10 1³ ₄" 10 Type 17 1500 X X Screws meet the requirements of ANSI 108 = threads per inch CGB For more information on corrosion, see pages 8 9. 63
DWC SERIES #6 and #8 Drywall-to-Wood # Phillips BITP Gray phosphate coating Standard QDA 158G2 DWC1PS 1" 6 500 X X DWC114PS 1¹ ₄" 6 500 1000 X X DWC158PS 1⁵," 6 500 1000 X X X DWC2PS 2" 6 000 X X DWC212PS 2¹ ₂" 8 1500 X 1. Order cartons with an "HCK" prefix before the model number, example: HCKDWC114PS. Screws meet the requirements of ASTM C 100-04 Type W DWCZ SERIES #6 Drywall-to-Wood # Phillips BITP Yellow zinc dichromate QDA 158G2 DWCZ114PS 1¹ ₄" 6 500 X X DWCZ158PS 1⁵," 6 500 X X X DWCZ2PS 2" 6 000 X X Screws meet the requirements of ASTM C 100-04 Type W DWCG SERIES #6 Drywall-to-Wood # Phillips drive BITP N000 coating QDA 158G2 DWCG114PS 1¹ ₄" 500 X X DWCG158PS 1⁵," 500 X X X Screws meet the requirements of ASTM C 100-04 64
DWHL SERIES #6 Drywall-to-Wood # Phillips drive BITP Hi-Lo threads Gray phosphate coating DWHL178PS 1⁷," 000 X X DWF SERIES #6 Drywall-to-Steel (Recommended steel thickness: 33, 7, 18 mils / 0,, 5 ga) # Phillips BITP Fine threads Gray phosphate coating QDA 158G2 DWF1PS 1" 500 X DWF114PS 1¹ ₄" 500 X X DWF158PS 1⁵," 500 X X X Screws meet the requirements of ASTM C 100-04 Type S DWFSD SERIES #6 Drywall-to-Steel (Recommended steel thickness: 54, 43 mils / 16, 18 ga) # Phillips drive BITP Fine threads # Drill point Available with yellow zinc dichromate and clear zinc coatings Coating QDA 158G2 DWFSD114PS 6 1¹ ₄" 0 Yellow Zinc 500 X X X DWFZSD114PS 3 6 1¹ ₄" 0 Clear Zinc 500 X X X QDA 158NS 1 DWFSD158PS 6 1⁵," 0 Yellow Zinc 500 X X X X 1. QDA158NS recommended for Fiberglass Backed Gypsum Sheathing. Not recommended for drywall.. Screws meet the requirements of ASTM C 100-04 and C 954 3. Listed in ICC-ES ER-563 4. = threads per inch For more information on corrosion, see pages 8 9. 65
PC SERIES #10 and #12 Metal Roofing-to-Wood Pancake head Available in clear zinc and Quik Guard coatings and 410 stainless steel Coating PP150 PC1BS1012 #10 1" 1 Clear Zinc 1500 X PCQ1BS1012 #10 1" 1 Quik Guard 1500 X SSPC1BS1012 #10 1" 1 410 Stainless Steel 1500 X PC1BS1211 #1 1" 11 Clear Zinc 1500 X PCQ1BS1211 #1 1" 11 Quik Guard 1500 X PCQ112BS1012 #10 1½" 1 Quik Guard 1500 X = threads per inch PCSD SERIES #10 and #12 Metal Roofing-to-Steel Drill point Pancake head Available in clear zinc and Quik Guard coatings Coating PP150 PCSD1S1016 #10 1" 16 3 Clear Zinc 1500 X PCSDQ1S1016 #10 1" 16 3 Quik Guard 1500 X PCSD1S1214 #1 1" 14 3 Clear Zinc 1500 X PCSDQ1S1214 #1 1" 14 3 Quik Guard 1500 X = threads per inch PCULP SERIES #10 Metal Roofing-to-Wood Ultra low profile pancake head Available in clear zinc and Quik Guard coatings and 410 stainless steel Also ideal for fastening panel flanges for snap-and-seam metal roofing Coating PP150 PCULP1BS1012 #10 1" 1 Clear Zinc 1500 X PCULPQ1BS1012 #10 1" 1 Quik Guard 1500 X SSPCULP1BS1012 #10 1" 1 410 Stainless Steel 1500 X = threads per inch 66
WSCD SERIES #8 Tile Roofing-to-Wood #3 Undersized square drive BIT3SU Twin threads N000 coating RF RF WSCD212S 2¹ ₂" 1500 X X WSCD3S 3" 1000 X Miami-Dade approved roofing product WSCT SERIES #8 Tile Roofing-to-Wood #3 Square drive BIT3S Twin threads Heavy zinc electroplate RF WSCT134S 1³ ₄" 000 X WSCT2S 2" 000 X RF WSCT212S 2¹ ₂" 1500 X X Screws meet the requirments of ASTM A 641 class 1 standard SSWSCB SERIES #8 Tile Roofing-to-Wood 305 stainless steel RF SSWSC2BS 2" 000 X RF SSWSC212BS 2¹ ₂" 1500 X X Miami-Dade approved roofing product 67
Ensure accurate color matching of HG screws to metal roofing with our color reference chart. Black Light Blue Burgundy Dark Bronze Tan White HG Series Attachment QD Color HX14G2 HG112WS Galvanized 1 1/2" 1000 X 1 HG112S Galvanized 1 1/2" 1000 X HG112WSBLACK Black 1 1/2" 1000 X HG112WSDKGRAY Dark Gray 1 1/2" 1000 X HG112WSGRAY Gray 1 1/2" 1000 X HG112WSDKBLUE Dark Blue 1 1/2" 1000 X HG112WSLTBLUE Light Blue 1 1/2" 1000 X HG112WSDKGREEN Dark Green 1 1/2" 1000 X HG112WSMDGREEN Medium Green 1 1/2" 1000 X HG112WSBRGREEN Bright Green 1 1/2" 1000 X HG112WSBURGUNDY Burgundy 1 1/2" 1000 X HG112WSBRRED Bright Red 1 1/2" 1000 X This flier is effective until June 30, 9, and reflects information available as of September 1, 7. This information is updated periodically and should not be relied upon after June 30, 9; contact Simpson for current information and limited warranty or see www.strongtie.com. Home Office 5956 W. Las Positas Blvd. Pleasanton, CA 94588 FAX: 925/847-1603 Northwest U.S.A. 5151 S. Airport Way Stockton, CA 95206 FAX: 209/234-3868 Dark Gray Dark Green Bright Red Medium Bronze Sand Bright White Gray Medium Green Southwest U.S.A. Southeast U.S.A. Western Canada 260 N. Palm Street 2221 ry Lane 11476 Kingston St. Brea, CA 92821 McKinney, TX 75069 Maple Ridge, BC V2X 0Y5 FAX: 714/871-9167 FAX: 972/542-5379 FAX: 604/465-0297 Northeast U.S.A. Eastern Canada Warehouses & Manufacturing: 2600 International Street 5 Kenview Blvd. Eagan, MN; Enield, CT; Gallatin, TN; Columbus, OH 43228 Brampton, ON L6T 5G5 High, NC; Jacksonville, FL; FAX: 614/876-0636 FAX: 905/458-7274 Kent, WA; Langley, BC Red Brown Stone Dark Blue Bright Green Medium Red Dark Tan Ivory HG Series Attachment QD Color HX14G2 HG112WSRED Red 1 1/2" 1000 X HG112WSMDRED Medium Red 1 1/2" 1000 X HG112WSDKBRONZE Dark Bronze 1 1/2" 1000 X HG112WSMDBRONZE Medium Bronze 1 1/2" 1000 X HG112WSBROWN Brown 1 1/2" 1000 X HG112WSDKTAN Dark Tan 1 1/2" 1000 X HG112WSTAN Tan 1 1/2" 1000 X HG112WSSAND Sand 1 1/2" 1000 X HG112WSSTONE Stone 1 1/2" 1000 X HG112WSIVORY Ivory 1 1/2" 1000 X HG112WSWHITE White 1 1/2" 1000 X HG112WSBRWHITE Bright White 1 1/2" 1000 X 1. Does not include a neoprene backed washer 800-999-5099 www.strongtie.com 7 Simpson Strong-Tie Company Inc. Printed in the U.S.A. F-QDHGCOLOR07 9/07 exp. 6/09 Quik Drive Auto-Feed Screw Driving Systems HG SERIES F-QDHGCOLOR07 9/07 exp. 6/09 7 Simpson Strong-Tie Company Inc. For Metal Roofing Custom Colors Available Combine the labor saving Quik Drive auto-feed screw driving system with our new line of HG colored screws for an ideal fastening solution for metal rooing. The new HG screws are collated hex head fasteners that are available in 22 stock colors to match a variety of roof panels (see color chart on reverse side). Custom color matching is also available to match any project, contact Simpson for details All HG screws feature an N galvanized inish for corrosion resistance Bonded neoprene washer Collated screws come with neoprene backed washers on the screw, ready to drive. The Quik Drive HX14 screw driving attachment saves time and effort when fastening metal rooing. The auto-feed design uses collated screws for quick and easy fastening of rooing panels. An optional tool extension allows stand-up driving for eficient positioning and installation of screws. #9 Metal Roofing/Siding-to-Wood ¹ ₄" Hex drive - BITHEX14 Hex washer head Neoprene-backed washer N000 coating Custom colors available to match any panel HX14 Fliers available with color-correct paint chips. Call (800) 999-5099 to contact your local Quik Drive representative. CBSDQ SERIES #8 Fiber-Cement Siding-to-Steel (Recommended steel thickness: 54, 43 mils / 16, 18 ga) # Undersized square drive BITSU Nibs under the head for easier # drill point with wings Ribbed flat head Quik Guard coating S CBSDQ158S 8 1⁵," 18 1500 X X X X CBSDQ214S 10 2¹ ₄" 16 1000 X X = threads per inch HX14 Color HG112WS Galvanized 1¹ ₂" 1000 X HG112S 1 Galvanized 1¹ ₂" 1000 X HG112WSBLACK Black 1¹ ₂" 1000 X HG112WSDKGRAY Dark Gray 1¹ ₂" 1000 X HG112WSGRAY Gray 1¹ ₂" 1000 X HG112WSDKBLUE Dark Blue 1¹ ₂" 1000 X HG112WSLTBLUE Light Blue 1¹ ₂" 1000 X HG112WSDKGREEN Dark Green 1¹ ₂" 1000 X HG112WSMDGREEN Medium Green 1¹ ₂" 1000 X HG112WSBRGREEN Bright Green 1¹ ₂" 1000 X HG112WSBURGUNDY Burgundy 1¹ ₂" 1000 X HG112WSBRRED Bright Red 1¹ ₂" 1000 X HG112WSRED Red 1¹ ₂" 1000 X HG112WSMDRED Medium Red 1¹ ₂" 1000 X HG112WSDKBRONZE Dark Bronze 1¹ ₂" 1000 X HG112WSMDBRONZE Medium Bronze 1¹ ₂" 1000 X HG112WSBROWN Brown 1¹ ₂" 1000 X HG112WSDKTAN Dark Tan 1¹ ₂" 1000 X HG112WSTAN Tan 1¹ ₂" 1000 X HG112WSSAND Sand 1¹ ₂" 1000 X HG112WSSTONE Stone 1¹ ₂" 1000 X HG112WSIVORY Ivory 1¹ ₂" 1000 X HG112WSWHITE White 1¹ ₂" 1000 X HG112WSBRWHITE Bright White 1¹ ₂" 1000 X 1. Does not include a neoprene backed washer 68
XS SERIES #10 and #12 Steel Decking/Stitching ⁵ ₁₆" Hex drive BITHEX516 Drill point Hex washer head Available in Climaseal and clear zinc coatings Coating HX516 HX516XL PP150 X78S1224 1 ⁷," 4 4 Climaseal 1500 X X X X1S1016 10 1" 16 3 Clear Zinc 1500 X X X X1S1214 1 1" 14 3 Clear Zinc 1500 X X X = Threads per inch Climaseal is a registered trademark of ITW Buildex and Illinois Tool Works Inc. TRSD SERIES #10 Steel-to-Steel # Phillips drive BITP # Drill point Modified truss head Clear zinc coating TRSD34S1012 10 ³ ₄" 1 500 X TRSD34S1016 10 ³ ₄" 16 500 X = Threads per inch PH PHSD SERIES #8 Steel-to-Steel # Drill point Pan head Clear zinc coating WSFLRV SERIES #8 Wood-to-Steel/Aluminum #3 Square drive BIT3S Fine threads Yellow zinc dichromate coating Curved Collation PHSD34S0818 8 ³ ₄" 18 500 X = Threads per inch S WSF1LRVS 1" 500 X X PH WSF134LRVS 1³ ₄" 000 X X X For more information on corrosion, see pages 8 9. 69
FHSD SERIES #8 and #10 Wood-to-Steel/ Aluminum, #12 Wood-to-Steel # Drill point Available in clear zinc and Yellow zinc dichromate coatings Coating S FHSD1S1018 #10 1" 18 Clear Zinc 500 X FHSD114S0818 #8 1¹ ₄" 18 Yellow 500 X X HSD60 FHSD212S1214 #1 2¹ ₂" 14 Yellow 750 X = Threads per inch TB SERIES 6mm (#14) Wood-to-Steel/Aluminum (Maximum steel thickness: ⁵ ₁₆") #3 Square drive BIT3S #4 Drill point with wings Yellow zinc dichromate coating (mm) (in) HSD60 TB1445S 14 45 1³ ₄ 14 4 1000 X HSD75 TB1460S 14 60 2³, 14 4 750 X X TB1475S 14 75 3 14 4 750 X = Threads per inch TBG SERIES 6mm (#14) Wood-to-Steel/Aluminum (Maximum steel thickness: ⁵ ₁₆") #3 Undersized square drive BIT3SU #4 Drill point with wings Flat Head N000 coating (mm) (in) HSD60 TBG1445S 14 45 1³ ₄ 14 4 1000 X HSD75 TBG1460S 14 60 2³, 14 4 750 X X TBG1475S 14 75 3 14 4 750 X = Threads per inch 70
WOOD DIAPHRAGM APPLICATIONS Horizontal floor diaphragm nailing shall be Simpson Strong-Tie Quik Drive WSNTL Series #8 flat head, countersunk wood screws (ICC ER-5053) with a minimum 1¹ ₄" penetration into the wood framing member. Quik Drive fasteners are specifically required to meet the structural calculations of plan. Allowable Shear for Horizontal Diaphragm Using WSNTL2LS or WSNTL212S Panel Grade Structural I Sheathing, single floor and other grades covered in DOC PS1 and PS2 8 Panel Thickness Minimum Nominal Width of Framing Member 2 3 2 3 2 3 2 3 BLOCKED DIAPHRAGMS 3, 9 Screw spacing at diaphragm boundaries (all cases), at continuous panel edges parallel to load (Cases 3 and 4), and at all panel edges (Cases 5 and 6) 6 4 2 4 2 4 Screw Spacing at Other Panel Edges 2 6 6 320 360 290 325 320 360 320 360 1. Allowable loads are listed in pounds per foot with DF-L or SP framing.. For IBC wind design, shear capacities may be increased 40% per IBC 306.3.1. For normal loading, shear capacities shall be reduced 5%. These two adjustments are not included in the Code Report. 3. Space screws at 1" on center along intermediate framing members. 4. Framing at adjoining panel edges must be 3 inches nominal or wider, and screws must be staggered where screws are spaced " or ¹ ₂" on center. 5, 6 425 480 385 430 425 480 425 480 Before substituting another brand, confirm that the load capacity is based on reliable published testing data or calculations. The Designer/Engineer of Record should evaluate and give written approval for substitution prior to installation. 4 3 640 720 575 650 640 720 640 720 730 820 655 735 730 820 730 820 5. WSNTL1S screws required. UNBLOCKED DIAPHRAGMS Screws spaced 6 inches, maximum, at supported edges 3, 9 Case 1 (No unblocked edges or continuous joints parallel to load) 285 320 255 290 285 320 285 320 All other configurations (Cases 2, 3, 4, 5 and 6) 215 240 190 215 215 240 215 240 6. The values for this application are not included in the Code Report. 7. See 003 IBC chapter 3 and 1997 UBC chapter 3 for additional requirements and information. 8. See 1997 UBC Table 3-II-H for Panel Grades. 9. Refer to the horizontal diaphragm figures of IBC Table 306.3.1 or ICC ER-5053. 2-PLY AND 3-PLY GIRDER TRUSS ATTACHMENT Simpson Strong-Tie Quik Drive WSNTL series #8 flathead, countersunk wood screws are a fast and reliable method for attaching -ply and 3-ply girder trusses. Design Value Comparison of Common Fasteners Used to Attach Truss Plies Together (in) Diameter (in) Shear (lbs.) Withdrawal (lbs.) Fastener DFL (100) SP (100) SPF (100) DFL (100) SP (100) SPF (100) WSNTL1S ¹ ₂ 0.13 85 95 70 15 151 88 WSNTL3S 3 0.13 100 110 85 187 6 13 0.10" Collated Nail 5 3 0.10 81 89 69 44 56 8 0.131" Collated Nail 5 3 0.131 97 106 8 48 61 31 10d Common 3 0.148 118 18 100 54 69 35 1. Table values are based on attachment of a 1¹ ₂" side member to a 1¹ ₂" main member of the same species and grade.. Table values are based on the 005 National Design Speciications (NDS). Values shall be multiplied by all applicable adjustment factors such as for load duration, etc. 3. Speciic Gravities (G) assumed: DFL G = 0.50, SP G = 0.55, SPF G = 0.4. 4. The spacing of applied uniform loads to the multi-ply member shall not exceed 4 inches on center. 5. Assumes collated nail Fyb = 100 ksi. INSTALLATION: Screw spacing shall be in accordance with the fastener schedule provided on the Truss Design Drawing or as otherwise approved by the Truss Designer. Screw spacing shall not exceed 1" on center and shall not be less than 3" on center. WSNTL series screws may be installed with the screw heads in either the loaded or unloaded ply. Do not overdrive screws. For 3-ply girder assemblies, the WSNTL screws may be installed from the same side as each ply is applied (no flipping of the truss is required) in accordance with BCSI (006 edition). Girders that are fastened together at the jobsite must have the fastener heads visible for inspection. Stagger the screws in the 3rd ply a minimum of 1" from the screws installed into the irst plies. Individual screw locations may be adjusted up to ¹ ₂ of the required screw spacing to avoid conlicts with other hardware or to avoid lumber defects. (3" minimum spacing still required.) Use minimum of 3" long fasteners to attach hangers to the girder truss. A 500 rpm motor is recommended. 2-Ply Assembly 3-Ply Assemblies 71
GENERAL LOAD TABLES Quik Drive Screws Shear and Tension Loads QUIK DRIVE - SCREW Allowable Load (100) MODEL NO. SCREW SIZE Shear Tension X1S1016 #10 x 1" 61 96 X1S114 #1 x 1" 88 1348 X78S14 #1 x ⁷," 975 1606 TRSD34S101 #10 x ³ ₄" 579 63 TRSD34S1016 #10 x ³ ₄" 69 706 PHSD34S0818 #8 x ³ ₄" 498 603 DWF158PS #6 x 1⁵," 419 55 DWF114PS #6 x 1¹ ₄" 419 55 DWFSD158PS #6 x 1⁵," 40 573 DWFSD114PS #6 x 1¹ ₄" 40 573 CB3BLG134S #10 x 1³ ₄" 513 677 CB3BLG11S #10 x 1¹ ₂" 505 681 PPSD11516S #8 x " 5 719 1. Screws have been tested per AISI Standard Test Method TS-04 using a 0.175 thick steel plate. The tabulated allowable loads are based on the screw strength itself with a factor of safety determined per 001 AISI NASPEC & 004 NASPEC Supplement section E4.. The tabulated values may be increased by 1/3 for seismic or wind loading as allowed in 1997 uniform building code and 000 IBC if alternate load combinations are used. Quik Drive Screw Allowable Loads Member Connections (100) No. Dia. SHEAR Steel Thickness: mil (ga) 3 33-33 43-43 54-54 68-68 97-97 33 43 54 68 97 33 43 54 68 97 (20-20) (18-18) (16-16) (14-14) (12-12) (20) (18) (16) (14) (12) (20) (18) (16) (14) (12) PHSD34S0818 #8 x ³ ₄" 0.164 35 307 474 477 4 - - - - - 15 133 14 47 - X1S1016 #10 x 1" 0.190 90 410 61 61 61 71 760 96 96 96 145 145 47 88 604 X1S114 #1 x 1" 0.16 91 397 73 88 88 X78S14 #1 x ⁷," 0.16 79 394 71 975 975 TRSD34S101 #10 x ³ ₄" 0.190 305 438 579 579 579 TRSD34S1016 #10 x ³ ₄" 0.190 93 398 545 69 69 1. Values based on lesser of Quik Drive screw strength (see table 1, above) or strength of the screw in the connected members.. Screws and screw connections have been tested per AISI Standard Test Method TS-05. The tabulated allowable loads are based on the lower of the screw strength itself or the strength of the screw in the connected members per 001 AISI NASPEC & 004 NASPEC Supplement section E4. 3. Values are based on cold-formed steel (CFS) members with a minimum yield strength of Fy=33 ksi and tensile strength of Fu=45 ksi for 43 mil (18 ga) and thinner and a minimum yield strength of Fy=50 ksi and Fu=65 ksi for 54 mils (16 ga) and thicker. PAN HEAD SCREW HEX HEAD SCREW 453 680 999 109 1348 136 146 TRUSS HEAD SCREW TENSION: PULL-OVER Steel Thickness: mil (ga) 3 TENSION: PULL-OUT Steel Thickness: mil (ga) 3 - - - - - 70 11 187 1 46 544 4. Minimum thickness represents 95% of the design thickness and is the minimum acceptable base metal thickness based on 001 AISI NASPEC section A.4. Design thickness for the steel sheets are: 33 mil=0.0346", 43 mil=0.0451", 54 mil=0.0566", 68 mil=0.0713", and 97 mil=0.1017". 5. Screw diameters per 001 AISI NASPEC Commentary Table C-E4-1. 6. Minimum required screw length is the lesser of 3/4" or the minimum length required for the screw to extend through the steel connection a minimum of (3) exposed threads per AISI General Provisions Standard section D1.3. 7. Larger of screw head or washer diameter, dw, for #10 and #1 screws is 0.375". 8. The tabulated values may be increased by 1/3 for seismic or wind loading as allowed in 1997 uniform building code and 000 IBC if alternate load combinations are used. 17-7
TB COLLATED SCREW SYSTEM Quik Drive auto-feed systems with TB series collated screw strips are a fast and reliable way to fasten wood-to-steel members. They are selfdrilling so no predrilling is required. 1¹ ₂" Min. Uplift F1 F2 1¹ ₂" Min. ⁷ ₁₆" L ⁷ ₁₆" 4" Min. 3" Min. ⁵ ₁₆" Max. F 1 Allowable Loads for Wood Attachment-to-Steel with Quik Drive TB Screws No. L Wood TB1460S ³," TB1475S 3" DF/SP Allowable Load Uplift F 1 / F 2 100 133 160 100 133 160 Code Ref. x 50 335 400 5 300 360 170 1. For use with structural steel members up to ⁵ ₁₆" thick or cold-formed steel members 16 gauge (54 mil) or thicker.. Standard product available in a yellow zinc dicromate coating or N000 coating for additional corrosion protection (TBG1460S or TBG1475S). 3. For use with x (1¹ ₂") DF/SP only. 4. For use with QD HSD60 or HSD75 Tool. WARNING: Industry studies show that hardened fasteners can experience performance problems in wet or corrosive environments. Accordingly, use this product in dry, interior, and noncorrosive environments only. F 2 1¹ ₂" Min. 4" Min. Simpson Strong-Tie Quik Drive is online at www.strongtie/quikdrive All of the information you need regarding Quik Drive auto-feed screw driving systems is a mouse click away. Complete product information as well as links to relevant Simpson Strong-Tie literature, code reports operating instructions, and more. You can order another copy of this catalog or watch a demonstration video to see the tools in action. Visit www.strongtie.com/quikdrive to see how easy it is to get up to speed on Quik Drive. 73