Solid State Relays 1- and 2 Pole SOLITRON With Integrated Heatsink

Similar documents
RN Thyristor Controllers

Solid State Relays Industrial, 1-Phase ZS (IO) w. LED and Built-in Varistor Types RM 23, RM 40, RM 48, RM 60

Solid State Relays Industrial, 1-Phase ZS (IO) w. LED and Built-in Varistor Types RM 23, RM 40, RM 48, RM 60

Solid State Relays Industrial, 1-Phase ZS, Standard Range Types RA /RA /RA

Solid State Relays SOLITRON MIDI Multi-Function Analog Switching Type RJ1P

SOLID STATE RELAY RATINGS

Industrial, 2-Pole ZS Type RA2A

Solid State Relay. Zero Switching Types RGC Solid State Contactor 'U' Connection. Product Description RGC 1 A 60 A 40 K G U _.

Solid State Relays 1-Phase, Zero Cross or Instant On Switching 25 AAC, 230 VAC with LED and Built-in Transil Types RF1A, RF1B

Motor Controllers Soft Starting/Soft Stopping Types RSC-AAM60/RSO...

Motor Controllers 3-Phase Analog Power Controller Types RSC-AAM60/RSO...

NEW Series STH Output to 75A, 600 Vac High Industrial Performance (HIPpak) Solid-State Relays

Semiconductor contactors, Solid-state relays

Solid State Relays Zero Switching Types Solid State Contactor

Solid State Relays Industrial, 1Phase Peak Switching Type RM1C

Solid State Relays Zero Switching Types RGC Solid State Contactor 'U' Connection

77 Series - Modular Solid State Relay 5 A. Features. Timers and Monitoring relays

1-Phase Integrated Heatsink Zero Cross or Instant On Switching

Solid State Relays Industrial, 1-Phase ZS w. LED Types RS 23, RS 40, RS 48

CI-tronic Soft start motor controller

48 Series - Relay interface modules A. Features

RP1A, RP1B. 1-phase PCB mount solid state relays. Main features. Description

38 Series - Relay Interface Modules A

3RF A A 0 2. Switching function. Control voltage Operating voltage with heat sink 10 = 10.5 A. A = Zero-point switching

RP1A, RP1B. 1-phase PCB mount solid state relays. Main features. Description

celduc SIM Phase angle controller Output : VAC 40A(*) Input : Analog 0-10V r e l a i s celpac

CI-tronic Analogue Power Controller ACI 30-1 and ACI 50-1

Power Electronics. POWERSWITCH Solid-State Contactor BF 9250, BH 9250

38 Series - Relay interface modules A. Features /

Semiconductor contactors, Solid-state relays

celduc SIL Phase angle controller Output : VAC 32A(*) Input : Analog 0-10V celpac r e l a i s Proud to serve you

Monitoring Relays True RMS 3-Phase, 3-Phase+N, Multifunction Types DPC01, PPC01

SELECTION GUIDE. BULLETIN 156 Solid-State Contactors

Rated power VA (50 Hz)/W 0.6/ / / /0.3 Operating range V AC (50/60 Hz)

08/07/2015

DATASHEET - ETR4-70-A. Delivery program. Timing relay, 2W, 0.05s-100h, multi-function, VAC/DC, potentiometer connection

celduc SILD Output : VAC 32A(*) Input : 3-32VDC - I<10mA Diagnostic : 30VDC - 100mA r e l a i s celpac P roud to serve you

DATASHEET - ETR4-51-A. Delivery program. Technical data General. Timing relay, star-delta, 50 ms, 1W, 3-60s, VAC/DC

Solid State Relays 3-Phase with Integrated Heatsink Types 2 & 3 Pole

Solid State Relays 1-Phase Integrated Heatsink Zero Cross or Instant On Switching

celduc SIM Phase angle controller Output : VAC 40A(*) Input : Analog 0-10V celpac r e l a i s Proud to serve you

Monitoring Relays True RMS 3-Phase, 3-Phase+N, Multifunction Types DPC71, PPC71

celduc SILD r e l a i s celpac PATENTED! AC Semiconductor Contactor pitch 22,5mm with Diagnostic compact size and DIN rail mounting.

Solid State Relays 1-Phase with Integrated Heatsink Soft Start Switching Types RGC1P..K..

Switching Power Supply Type SPP1 60W Enclosed type

ATS01N125FT soft starter for asynchronous motor - ATS01-25 A V KW

ATS01N112FT soft starter for asynchronous motor - ATS01-12 A V KW

3.6. Control Relays and Timers D A M D 2. Contents. Product Overview. Catalog Number Selection. Solid-State Relays

Catalog 200 Contactors up to 115 A Motor Starters up to 55 kw 03/2009

Solid-state Contactor Specifications

Subject to changes 11/2003 Page 1/7

Pole "Common" Jumper 10 postion jumper - Red

Monitoring Relays True RMS 3-Phase, 3-Phase+N, Multi-function Types DPB01, PPB01

ATS01N206QN soft starter for asynchronous motor - ATS01-6 A V KW

Solid State Relays 1-Phase, Soft Start Switching Types RGS1P..K..

LC2D09BL REVERSING CONTACTOR 575VAC 9A IEC

Monitoring Relays True RMS 3-Phase, 3-Phase+N, Multifunction Types DPC01, PPC01

CI-tronic Analogue Power Controller ACI 30-1 and ACI 50-1

ATS01N222LU soft starter for asynchronous motor - ATS01-22 A V KW

Control Input. Status Ouputs. 0 to 24VDC 1A AC/DC. Fig. 1 TYPICAL APPLICATIONS Fig. 2 WIRING DIAGRAM

Type: DILEM 10(220V50HZ,240V60HZ) Article No.:

05/09/2012

Type CP-S, CP-C & CP-A Switch mode

Status Ouputs. Control Input. 0 to 24VDC 1A AC/DC. 4-20mADC. Fig. 1 TYPICAL APPLICATIONS Fig. 2 WIRING DIAGRAM

Solid State Relays Zero Switching Types RGC Solid State Contactor 'E' Connection

ATV12HU40M3 variable speed drive ATV12-4kW - 5hp V - 3ph - with heat sink

Notes: Note1: Efficiency is tested at nominal input and full load at +25 C ambient. Output Voltage 400VAC 320VAC 360VAC 400VAC 400VAC

38 Series - Relay interface modules A

38 Series - Relay interface modules A

Type: DILEM 10 G(24VDC) Article No.:

DSA150 Series. xxx Series. 150 Watts. AC-DC Power Supplies. Models & Ratings. Mechanical Details 3.92 (99.8) 2.18 (55.5) 4.92 (125.

02/11/2015

VEO. V2PF480Y/277VS01 Art.Nr.: B TECHNICAL DATA

Solid State Relay. Zero Switching Types RGC Solid State Contactor 'E' Connection. Product Description RGC 1 A 60 A 30 K K E _.

48 SERIES. Relay interface modules 8 A CO forcibly guided contacts relay interface modules,15.8 mm wide Type 48.12

2 Pole CO, 8 A Plug-in 2 CO (DPDT) 1 CO (SPDT) 8/15 16/25* 250/ /400 2,000 4, /0.5/ /0.5/ (5/5) 300 (10/5)

Relay interface modules A

ADC5000 SERIES. AC/DC Switch Mode Power Supplies and Rectifiers for Industrial and Telecom Applications. 60W, 125W and 250 W

ATS01N206QN soft starter for asynchronous motor - ATS01-6 A V KW

58 SERIES. Relay interface modules 7-10 A 58.P3 58.P4

08/07/2015

18V 35V 65V 40A 60A 1.5W 1.2W ms 40ms. 20ms 20ms

ATV12HU22M2. Main. Range of product Altivar 12. Component name Quantity per set Set of 1. Built-in fan. Motor power hp Communication port protocol

ATV12H018F1 variable speed drive ATV kW hp V - 1ph

02/11/2015

ATV12H037F1 variable speed drive ATV kW hp V - 1ph - with heat sink

Notes: Note1: Efficiency is tested at nominal input and full load at +25 C ambient. Output Voltage 400VAC 400VAC

Circuit Breakers. Excerpt from Master Catalogue. Circuit Breakers. Specifically For You

Zelio Control Measurement Relays

Micro Contactors. Micro Contactor Relays 10. Micro Contactors 11. Micro Contactors With Solder Pins 12. Coil voltages 12. Micro Reversing Contactor 13

120/240 Watt AC-DC Front End with PFC W Series Convert Select 120 Convert Select 240

VEO. V2PF480Y/277VSY01 Art.Nr.: V2PF480Y/277VSY01P Art.Nr.: TECHNICAL DATA

Switched mode power supply for DIN rail mounting type SMP23 DC24V/40A

60 Series - General purpose relays 6-10 A. Features Plug-in mount 10 A General purpose relay

Switched mode power supply for DIN rail mounting type SMP21 DC24V/10A

3 Input (+) & 4 Input (-) 1 & 2 Output

LC1D25BL TeSys D contactor - 3P(3 NO) - AC-3 - <= 440 V 25 A - 24 V DC coil

AQ-R SOLID STATE RELAY FEATURES

Mini Contactors. Mini Contactor Relays 4-pole 8 Auxiliary Contact Blocks. Interface Contactor Relays. Mini Contactors 10 Auxiliary Contact Blocks

ATS01N103FT soft starter for asynchronous motor - ATS01-3 A V KW

Transcription:

Solid State Relays 1- and 2 Pole SOLITRON With Integrated Heatsink AC Solid State Contactor, 1- and 2 poles Zero switching for heating and motor applications Instant-on switching Rated operational current 30 A, 50 A and 63 A Rated operational voltage 230 VAC, 400/480 VAC Transient overvoltage protection built-in LED-indication IP 20 protection DIN-rail mountable Product Description Ordering Key RN 1 3 A 50 The SOLITRON Solid State Contactor is designed for industrial heating and motor control applications. The Solid State Contactor is capable of switching 1-, 2-, and s with loads up to 63 A AC1 load and up to 24 A AC3 load. The Solid State Contactor is designed for DINrail mounting with integrated heatsink and overvoltage protection. The heatsink is moved to the front for optimal convection cooling in the panel. Cable ducting system will not stop the airflow. The contactor elements are soldered directly on to the direct copper bonded substrate (DCB-technology). AC or DC controlled versions are available. Built-in LED status indication for applied control voltage. Solid State Relay Number of poles Switching type A: Zero switching B: Instant on switching Rated operational voltage voltage Rated operational current Type Selection, 1 Pole Rated operational voltage Rated operational current voltage AC51: 30 A AC51: 50 A AC51: 63 A AC53a: 6 A AC53a: 12 A AC53a: 24 A 230 VAC 5-32 VDC RN 1A23D30 RN 1A23D50 RN 1A23D63 5-32 VDC RN 1B23D30 RN 1B23D50 RN 1B23D63 24-230 ± 15% VAC/DC RN 1A23A30 RN 1A23A50 RN 1A23A63 400/480 VAC 5-32 VDC RN 1A48D30 RN 1A48D50 RN 1A48D63 5-32 VDC RN 1B48D30 RN 1B48D50 RN 1B48D63 24-230 ± 15% VAC/DC RN 1A48A30 RN 1A48A50 RN 1A48A63 Type Selection, 2 Pole Rated operational voltage Rated operational current voltage AC51: 30 A Total AC51: 50 A Total AC53a: 6 A AC53a: 12 A 230 VAC 5-32 VDC RN 2A23D30 RN 2A23D50 5-32 VDC RN 2B23D30 RN 2B23D50 24-265 VAC/DC RN 2A23A30 RN 2A23A50 400/480 VAC 5-32 VDC RN 2A48D30 RN 2A48D50 5-32 VDC RN 2B48D30 RN 2B48D50 24-265 VAC/DC RN 2A48A30 RN 2A48A50 2-88 Specifications are subject to change without notice (08.05.2002)

RN 1 3 A 50 General Specifications RN..23... RN..48... Operational voltage range 24 to 265 VAC 42 to 530 VAC Non-rep. peak voltage 800 V p 1200 V p Varistor voltage 275 VAC 510 VAC Operational frequency range 45 to 65 Hz 45 to 65 Hz Power factor at rated voltage 0.5 0.5 Approvals UL, cul, CSA UL, cul, CSA CE-marking Yes Yes Norms fulfilled HD 419.2S1 Low-voltage controlgear semiconductor contactors EN 50082-2 Generic Immunity Standard. Industrial Environment Input Specifications RN...D RN...A.. Rated control voltage range RN1 5 to 32 VDC 24 to 265 VAC/DC RN2 2 x 5 to 32 VDC 2 x 24 to 265 VAC/DC Pick-up voltage 4 VDC 14 VAC/DC Drop-out voltage 3 VDC 6 VAC/DC Reverse voltage max. 32 VDC - Input current RN1 < 9 ma < 12 ma RN2 < 9 ma per pole < 12 ma per pole Response time Pick-up time max. (50 Hz) RN10 ms 20 ms RN.B < 1 ms - Drop-out time max. (50 Hz) RN.0 ms 20 ms RN.B 10 ms - Input-ON indication (LED, green) Yes Yes Output Specifications RN...30 RN...50 RN...63 Rated operational current RN1A.. AC51 @Ta=30 C 30 A 50 A 63 A @Ta=40 C 30 A 50 A 50 A @Ta=50 C 23 A 38 A 40 A @Ta=60 C 20 A 30 A 30 A AC53a @Ta=40 C 6 2 4 A RN2A.. AC51 @Ta=30 C 30 A total sum 50 A total sum - @Ta=40 C 30 A total sum 50 A total sum - @Ta=50 C 23 A total sum 38 A total sum - @Ta=60 C 20 A total sum 30 A total sum - AC53a @Ta=40 C 6 2 A - Zero crossing detection Yes Yes Yes Min. operational current 200 m00 m00 ma Rep. overload current t=1 s (Tj init.=25 C) 55 AACrms 125 AACrms 150 AACrms Non-rep. surge current t=10 ms (Tj init.=25 C) 250 A p 600 A p 1000 A p Off-state leakage current, @ rated voltage and frequency (Tj.=125 C, max.) < 1 ma < 1 ma < 1 ma I 2 t for fusing t=1 to 10 ms 310 s 1800 s 5000 s Critical dv/dt off-state 500 V/µs 500 V/µs 500 V/µs Specifications are subject to change without notice (08.05.2002) 2-89

RN 1 3 A 50 Thermal Specifications RN...30 RN...50 RN...63 Operational temperature -20 to +70 C (-4 to +158 F) -20 to +70 C (-4 to +158 F) -20 to +70 C (-4 to +158 0 F) Storage temperature -40 to +100 C (-40 to +212 F) -40 to +100 C (-40 to +212 F) -40 to +100 C (-40 to +212 F) Junction temperature < 125 C (257 F) < 125 C (257 F) < 125 C (257 F) R th junction to ambient (AC load) 2.8 K/W 1.7 K/W 1.5 K/W Housing Specifications Mounting Weight with RHN1 Weight with RHN2 Housing material LED window material Base plate Potting compound Terminals DIN-rail 35 mm 470 g 780 g Glass reinforced noryl SE1GFN1 PC Lexan 141R Aluminium, nickel-plated Polyurethane, Casco Nobel Screw with captive wire clamp terminals nominal 4 mm 2 or 2 x 2.5 mm 2 AWG 12 or 2 x AWG 14 Min. 0.5 mm 2, AWG 20 Mounting torque max. 0.6 Nm Power terminals nominal 10 mm 2 or 2 x 6 mm 2 AWG 6 or 2 x AWG 10 Min. 1 mm 2, AWG 16 Mounting torque max. 2.0 Nm Heatsink compound used Dow Corning 340 Insulation Rated impulse withstand voltage Input to output 4000 V imp Rated impulse withstand voltage Output to heatsink 4000 V imp Environment Specifications Humidity max. Dimensions 95%, no condensation Dimensions with RHN 1 (30 A) (H x W x D) 120 x 45 x 110 mm Dimensions with RHN 2 (50, 63 A) (H x W x D) 120 x 90 x 110 mm Wiring Diagrams 1-pole RN... 2-pole RN... A 3 A 4 2-90 Specifications are subject to change without notice (08.05.2002)

RN 1 3 A 50 Terminal Layout Functional Diagrams 1-pole RN.. 2-pole RN.. 1-pole RN... A 3 2-pole RN... 1 A 4 2 A 3 A 4 Shown with RHN1 Applications Single and double pole relay application Line-Neutral Line-Line /N Double pole relay in Delta and star application (Economy Switch) L 3 Two single pole relays in Delta and star. (Economy Switch) L 3 Specifications are subject to change without notice (08.05.2002) 2-91

RN 1 3 A 50 Applications (cont.) 3 single pole relays in Delta, Star, Star with neutral L1 L2 L3 N Single and double pole relay in Delta, Star, Star with neutral L1 L2 L3 N Dimensions 103 89 103 4 120 60 20 70 30 4 120 45 37 71,6 93 60 20 70 30 45 37 71,6 33,7 Note: all dimensions in mm RHN 1 RHN 2 72 Note: all dimensions in mm 2-92 Specifications are subject to change without notice (08.05.2002)