SOMAB GENYMAB RANGE GENYMAB RANGE Multi function machining centre Turning, milling, gear machining From 4 to 9 axes, with tool changer SOMAB Société de Mécanique et d Automatisme du Bourbonnais Switchboard : +33(0)4 70 35 15 90 Fax : +33(0)4 70 20 58 26 Moulins - Allier FRANCE www.somab.fr Combination of a 5-axis machining centre and a lathe CNCs used NUM SIEMENS
Granitan single-piece base assembly Mechanical frame Machining module Very compact tool-holder head equipped with 2 spindles fitted at 90 from each other Fixed spindle dedicated to turning Rotating spindle dedicated to milling Attachments: ISO40, BT40, HSK63, CAPTO C5 and C6 Angle orientation is performed continuously over 320 (B axis) with a mechanical locking every 2.5 Carriage The head is moved using a 3-linear axis (X, Y, Z) carriage. This is a real milling structure, with a column and a transversal ram, enabling a large Y stroke. Tailstock Fixed to the grooved table or to the bed Turning module Main 8 or 11 spindle Spindle passage diameter: 73-105 or 120 Synchronous electro spindle Grooved table to clamp parts or Bed designed to support a tailstock, rests or a sub-spindle
Front bed version Sub-spindle version Fixed table version Tool changer GENYMAB 400LEAN 400 630 630L 630XL 1000 1250 Travels and dimensions Swing diameter Max. diameter to machine a part clamped in the chuck 430 400 700 630 1100 1000 1350 1250 Transversal Y-axis travel Vertical X-axis travel 300 500 600 400 600 650 700 1100 Longitudinal Z-axis travel 1000 900 1600 2100 3300 to 6000 Turning module Tool-holder headstock Power kw 15/23 23/33 (31/37) 31/37 (51.5/57) 50/75 A1-8" A1-8" (A2-8") A2-8" ( A1 11" ) A1-11" ( A2 15" ) Spindle passage diameter Ø 73 Ø 73 (Ø 105) Ø 105 ( Ø 120.5 ) Ø 120 ( Ø 142 ) Chuck diameter 230 230 (280) 280 ( 350 to 500 ) 350 ( 630 ) Max spindle speed tr/min 4500 4500 (3200) 3200 ( 2400 ) 2400 ( 1500 ) C axis 0,0001 0,0001 0,0001 0,0001 Machining module Tool-holder head Live-tool power kw 5.5/10 9/17 9/17 (15/29) 15/29 Max spindle speed rpm 8000 (12000) 8000 (12000) 8000 Head indexing B axis Tool changer Quantity of tools stored Features of tool-holders tous les 2,5 28 ( 50 ) ISO 40 (HSK 63 or CAPTO C5) tous les 2,5 28 ( 50 ) ISO 40 (HSK 63 or CAPTO C5 or C6) tous les 2,5 28 ( 50 ) CAPTO C5 or HSK 80 EQUIPMENTS Front bed with tailstock Inside the base Inside the base Inside the base Distance between centres 1 150 1 500 2 200 2 700 3300 to 6000 Swing over bed 430 600 600 600 Quill stroke and diameter Ø 90-100 Ø 110-160 (Ø 150-160) Ø 180-200 Grooved table and tailstock Table length/width 1600 / 340 1400 / 340 Swing over table 420 600 Distance between centres 1 150 1130 Quill travel and diameter Ø 90-100 Ø 110-160 Detachable grooved table on front bed Length/Width 500 / 400 Swing over table Sliding head sub-spindle 280 Max distance between spindles 1000 1500 2200 2700 Power of spindle motor Spindle passage diameter Chuck diameter Max spindle speed kw tr/min 22 A1-6" Ø 61 210 4500 23/33 (51.5/57) A1-8" (A1-11") Ø 73(Ø120.5) 230 (350 to 500) 4500 (2400) The manufacturer reserves the right to change any features stated in this document.
GENYMAB Sub-spindle Front turret GENYMAB BR TA 400 Travels and dimensions Max distance between spindles 1400 Swing over bed 430 Max. diameter to machine a part clamped in the chuck 400 Longitudinal Z-axis travel 1000 Transversal Y-axis travel 300 Vertical X-axis travel 500 Turning module Tool-holder headstock Power kw 23 / 33 (31 / 37) Spindle type moteur broche A1-8" (A2-8") Spindle passage diameter Ø 73 ( Ø 105 ) Chuck diameter 230 ( 280 ) Max spindle speed rpm 4500 ( 3200 ) C axis 0,0001 Sliding head sub-spindle Power of spindle motor kw 22 A1-6" Spindle passage diameter Ø 61 Chuck diameter 210 Max spindle speed rpm 4500 W-axis travel 1180 Front turret Number of tool posts 12 VDI Ø 40 (radial taking out) Live tools 9 kw (optional) Max. machining diameter using the front turret 380 Longitudinal Z2-axis travel 1 170 Transversal X2-axis travel 200 GENYMAB Vertical GENYMAB vertical Capacities Max. machining diameter 300 Max. evolution diameter 430 Max. machining length 200 Headstock Nose and spindle passage diameter A1-8 - ø 73 Speed 4500 rpm Max. power - torque 32,5 / 40,5 kw - 227 Nm Saddle Horizontal X-axis travel 900 Vertical Z-axis travel 600 Transversal Y-axis travel 300 Machining module Tool-holder head Live-tool power kw 9/17 Max spindle speed rpm 8000 (12000) Head indexing Every 2.5 B axis Tool changer Quantity of tools stored 28 ( 50 ) Features of tool-holders ISO40 (HSK 63 - CAPTO C5)
Turning Gear machining Drilling - Boring Axial drilling Angle cutting End milling Side milling Transversal milling Milling on fixed table Part probing Radial part probing Tool probing
GENYMAB Multi function machining centre 400 / 630 1000 / 1250 French manufacturer of lathes, milling machines and multidirectional machines OPTIMAB Universal lathe 250 / 350 450 / 550 700 / 900 DELTAMAB Multi-axis lathe 400 / 400 BR 600 / 600 BR 700 / 700 BR ALPHAMAB Production lathe 270 / 310 / 320 336 / 340 / 370 MAXIMAB XL Flat bed lathe Dedicated After Sales Service Assistance and technical support provided by SOMAB 1070 / 1170 / 1270 / 1420 / 1520 1620 / 1800 / 1900 / 2000 DIAM Machining centre Vertical 3 to 5 axes Horizontal 300 / 400 / 450 / 500 / 800 / 1000 850 / 1060 / 1270 / 1670 2150 / 2600 / 3200 620 5 axes SOMAB 133, rue des Garceaux - 03000 Moulins - FRANCE Switchboard : +33(0)4 70 35 15 90 Sales tel : +33(0)4 70 35 15 70 Fax : +33(0)4 70 20 58 26 E-mail : coercial@somab.fr - Web : www.somab.fr SOMAB reserve the right to change, without any notice, any features of their machines in order to consider any possible changes brought to their machines, in terms on design and changes of equipments and optional accessories. When delivered, both appearance and performances of the machine may be different from those stated in this document. Impression - Moulins GEA15S