Notor LED
Notor LED Designed by Julle Oksanen and Vesa Honkonen Fagerhult s classic Notor G2 luminaire has now been brought right up to date using the latest LED technology. The expansive range spans suspended, surface mounted and recessed variations, offering the flexibility to maintain a consistent aesthetic across numerous applications. Notor is characterised by discretion. Its minimalist style and clean line design is constructed of aluminium with a natural anodised finish. In continuous runs Notor provides an unbroken line of light in the ceiling while the L-coupler offers the scope to create more varied installations. The LED variation is lit all the way to the end caps of the luminaire housing, further enhancing its visual appeal with illuminated corners. The luminaires can be connected using a snap in connector for safe and efficient installation, while providing additional protection to the light sources and other technology during installation. 1 1. Notor LED utilises the benefits of LEDs. The luminaire has an exceptional level of uniformity in the diffuser and a high luminous efficacy. Notor LED can be surface mounted or suspended via a wire pendant. 2. The system is connected via end cap of the start luminaire. The wiring is hidden by the end cap. The start luminaire can also be used in a single installation. 3. For continuous and system installations, through wiring is achieved via a snap in connection: the luminaires are clicked together and then secured with a screw joint. Each luminaire unit has an integrated ballast. 4. The continuous luminaires have an unbroken line of light without dark fields at the transition between the luminaire units. 5. The L-joints provide full lighting, creating an aesthetically pleasing transition in corners. 6. The LEDs are protected against contact by a plastic cover which prevents external influences. 2 3 4 5 6 2
523 Notor LED Luminaire System, W Colour temp., K Luminous flux, lm Efficiency, lm/w kg Start Continuous Straight luminaire 11 4000 900 82 2.0 26370 26373 22 4000 1800 82 3.0 26371 26374 44 4000 3600 82 6.0 26372 26375 Illuminated corner Right 22 4000 1800 82 3.0 26392* 26390 Left 22 4000 1800 82 3.0 26393* 26391 * Only for suspension and in closed systems. Information LED-Luminaire Colour temp, (CCT) Ra (CRI) Life Colour quality 4000 K 80 L 70 50.000 h MacAdam 4 SDCM For further information on LEDs, please refer to the Technical Information chapter. Suffix code -402 DALI Add suffix code to the end of the luminaire part number to indicate required function. Installation Designed for single or continuous installation with surface mounting and via a wire pendant and special loops that give flexible c/c spacing. Can also be mounted on the wall via the wall bracket, see accessories. Connection The luminaire is equipped with an access hole for cabling on the top. A special short end with cable entry is used for a surface mounted mains cable, see accessories. The luminaire unit is equipped with a throughwiring cable (5 1.5 mm²) and a snap-in connection in each end-cap. In a continuous installation, the luminaire row should always begin with a start luminaire. Design Luminaire unit in natural anodised, extruded aluminium finish. Louvre Opal plate in frosted acrylic (PMMA). Accessories Assembly fittings and supplementary components, see accessories. Miscellaneous The LEDs are protected against contact. Illuminated corners with wiring option can only be suspended. The illuminated corners can be used as a start luminaire and are equipped with through-wiring and quick connection in one end. The corners can only be used in closed systems. All variants By continuous installation all wiring needed is performed in the start luminaire, which provides a safe and efficient installation. A₁ A A₂ A₁ A A₂ 100 A A₁ A₂ 684 195 385 1266 195 969 2433 195 2136 A A₁ A₂ 584 99 385 1168 99 969 2335 99 2136 406 595 99 385 89 632 LED provides uniform luminance and completely illuminated corners. 3
523 Notor Recessed LED Opal flush Straight luminaire LED-module, lm, W Colour temp., K Length Luminous flux, lm Efficiency, lm/w kg Single Start Continuous 1250, 9.8 3000 600 1.9 22609* 22615 22621 2500, 19.6 3000 1200 3.7 22610 22616 22622 5000, 39.2 3000 2400 7.4 22611 22617 22623 1250, 9.8 4000 600 874 73 1.9 22612* 22618 22624 2500, 19.6 4000 1200 1798 82 3.7 22613 22619 22625 5000, 39.2 4000 2400 3596 82 7.4 22614 22620 22626 * Not possible to be mounted as single luminaire in ceilings with visible T-bars (VTB). Installation Luminaire for mounted in ventilated or unventilated suspended ceilings. Installed in suspended ceilings with visible T-bars, VTB (25 or 15 mm) or one-piece suspended ceilings. Connection Connection by means of a connection box on top of the luminaire. Wieland Chassis connector 3-way (GST 18i3), with dimming 5-way (GST 18i5). In a continuous installation the luminaire row should always start with a start luminaire. With continuous installation the luminaire units are interconnected with a connection cable in the connection box. Design Luminaire body in natural anodised, extruded aluminium. With continuous installation an unbroken line of light is achieved, even via a L-coupling. Louvre Opal plate in frosted acrylic (PMMA). Miscellaneous Accessories and cables, see Accessories. Illuminated corners LED-module, lm, W Colour temp., K Module Luminous flux, lm Efficiency, lm/w kg 2500, 19.6 3000 600 600 3.5 22632 2500, 19.6 4000 600 600 1798 82 3.5 22633 Information LED-Luminaire Colour temp, (CCT) Ra (CRI) Lif e Colour quality 3000 K 85 L 70 50.000 h MacAdam 4 SDCM 4000 K 85 L 70 50.000 h MacAdam 4 SDCM For further information on LEDs, please refer to the Technical Information chapter. Suffix code -402 DALI Add suffix code to the end of the luminaire part number to indicate required function. Opal flush, 600 mm Opal flush, 1200 mm Continuous coupler bends into the frame for a single installation. Single Module A¹ A² 600 589 A¹+22 A¹+10 80 1200 1174 A¹+22 A¹+10 80 2400 2343 A¹+22 A¹+10 80 Total A¹ Total A² A¹ + A¹ A¹ + A¹ + 26 A¹ 585 1170 2339 Continuous Total A¹+10 80 4 t h 78.5 A¹ 10 30 100 30 50 121 h 100 102 t 80 90.5 A² The LED board is safeguarded by the transparent contact protection with a lens function.
523 Notor Recessed LED Opal dropped Straight luminaire LED-module, lm, W Colour temp., K Length Luminous flux, lm Efficiency, lm/w kg Start Single/Cont./End 1250, 9.8 3000 600 1.9 22963 22969* 2500, 19.6 3000 1200 3.7 22964 22970 5000, 39.2 3000 2400 7.4 22965 22971 1250, 9.8 4000 600 906 75 1.9 22966 22972* 2500, 19.6 4000 1200 1856 84 3.7 22967 22973 5000, 39.2 4000 2400 3712 84 7.4 22968 22974 * Not possible to be mounted as single luminaire in ceilings with visible T-bars (VTB). Installation Luminaire for mounted in ventilated or unventilated suspended ceilings. Installed in suspended ceilings with visible T-bars, VTB (25 or 15 mm) or one-piece suspended ceilings. Connection Connection by means of a connection box on top of the luminaire. Wieland Chassis connector 3-way (GST 18i3), with dimming 5-way (GST 18i5). In a continuous installation the luminaire row should always start with a start luminaire. With continuous installation the luminaire units are interconnected with a connection cable in the connection box. Design Luminaire body in natural anodised, extruded aluminium. With continuous installation an unbroken line of light is achieved, even via a L-coupling. Louvre Opal plate in frosted acrylic (PMMA). The louvre hangs down 10 mm from the ceiling and provides ambient luminance to ceiling and wall. Miscellaneous Accessories and cables, see Accessories. Illuminated corners LED-module, lm, W Colour temp., K Module Luminous flux, lm Efficiency, lm/w kg 2500, 19.6 3000 600 600 3.5 22630 2500, 19.6 4000 600 600 1856 84 3.5 22631 Information LED-Luminaire Colour temp, (CCT) Ra (CRI) Life Colour quality 3000 K 85 L 70 50.000 h MacAdam 4 SDCM 4000 K 85 L 70 50.000 h MacAdam 4 SDCM For further information on LEDs, please refer to the Technical Information chapter. Suffix code -402 DALI Add suffix code to the end of the luminaire part number to indicate required function. Opal dropped, 600 mm Opal dropped, 1200 mm Illuminated L-coupling provides light right into the corner. Single Module A¹ A² 600 589 A¹+22 A¹+10 80 1200 1174 A¹+22 A¹+10 80 2400 2343 A¹+22 A¹+10 80 Total A¹ Total A² A¹ + A¹ A¹ + A¹ + 26 A¹ 585 1170 2339 Continuous Total A¹+10 80 t h 10 30 100 30 50 121 h 78.5 A¹ 100 102114 t 80 71.5 90.5 A² Dummy section. 5
Notor Recessed LED Accessories 1. Mounting bracket Mounting bracket/pair 91045 2. Dummy section Dummy section 600 mm, Opal dropped 91120 Dummy section 600 mm, Opal flush 91121 3. End-cap End-cap/pair, Opal flush 91053 End-cap/pair, Opal dropped 91054 1 2 4. Cover unit Cover plate/pair provides IP 44 on dropped opal start luminaire used single installation. Cover plate comes with start luminaire. 91055 Mains cable 1-phase, 3-way connectors (Wieland GST). Mains cable, female, length 2.0 m 91789 Mains cable, female + earthed plug, length 2.0 m 91790 3 4 Connection cables, quick connection system, 3-way White connection cable, female + male, cross-section 1.5 mm 2, 1-phase, 3-way connectors (Wieland GST). Length 1.0 m 91791 Length 2.0 m 91792 Length 2.5 m 91074 Length 3.0 m 91793 Mains cable 1-phase + dimming (Wieland GST) 5-way. Mains cable, female, length 2.0 m 91022 Connection cables, quick connection system, 5-way Black connection cable, female + male, cross-section 1.5 mm 2, 1-phase + dimming (Wieland GST) 5-way. Length 1.0 m 91030 Length 2.0 m 91076 Length 2.5 m 91077 Length 3.0 m 91031 ex. 1.0 m 641 600 mm 1200 mm 647 Length Inter-connecting cable 600+600 mm 1.0 m 600+1200 mm 1.0 m 600+2400 mm 2.0 m 1200+1200 mm 2.0 m 1200+2400 mm 2.0 m 2400+2400 mm 2.5 m 605 611 6
australia eagle lighting australia www.eaglelighting.com.au eagle@eaglelighting.com.au victoria 17-19 Jets Court Melbourne Airport, VIC 3045 Phone +61 3 9344 7444 Fax +61 3 9344 7433 new south wales Unit 4, 21 Mars Road Lane Cove, NSW 2066 Phone +61 2 9420 5799 Fax +61 2 9420 5988 Fagerhult develops, manufactures and market professional lighting systems for human environments. Our operations are run with a constant focus on design, function, flexibility and energy saving. Fagerhult is a member of the Fagerhult Group, the largest lighting group in the Nordic region and a leading company in Europe. We have offices in more than 15 countries and production units in Europe, China and Australia. queensland 53 Caswell Street East Brisbane, QLD 4169 Phone +61 7 3891 0744 Fax +61 7 3891 0755 act lite-tech agencies 1 Lithgow Street Fyshwick, ACT 2609 Phone +61 2 6280 5516 Fax +61 2 6280 8635 tasmania southern lighting & distribution 34 Federal Street North Hobart, TAS 7000 Phone +61 3 6231 5599 Fax +61 3 6231 5211 south australia h.i. lighting sa pty ltd 8 Hender Avenue Magill, SA 5072 Phone +618 8304 8500 Fax +61 8 8304 8501 western australia h.i. lighting pty ltd 111 Broadway Bassendean, WA 6054 Phone +61 8 9377 1322 Fax +61 8 9377 1761 new zealand fagerhult new zealand www.fagerhult.co.nz auckland Level 1, 18A Neilpark Drive East Tamaki, Auckland 2013 Mobile +64 21 655 609 Mobile +64 21 509 248 wellington Mobile +64 21 597 900 christchurch flare lighting Unit 1/204 Cumnor Terrace Woolston 8023 Phone +64 3 977 2034 Fax +64 3 977 2048