CUT-OFF ANGLE, 22º FWHM CUT-OFF ANGLE, 55º FWHM. light

Transcription

1 APEX

2

3 CUT-OFF ANGLE, º FWHM Apex is a powerful ambient ing fixture that uses a precise viewing cut-off angle and recessed cell-lens technology to maintain a discrete and minimal presence, while delivering a dramatic º beam of. CUT-OFF ANGLE, 55º FWHM The custom designed optical baffle creates a precise 55 cut-off angle delivering an efficient and controlled beam of experience.

4 ADVANCED PERFORMANCE Apex offers three distinct optics for direct illumination: º, 55º, and HE Tech TM. The HE Tech TM provides high performance from a narrow / aperture diffuse acrylic lens. Combine any of the three Apex optics in an unlimited number of arrangements, whether in linear luminaires, continuous runs, or patterns. Corner and pattern configurations are available through either a lit HE lens corner or unlit filler panel corner.

5

6 CELLULAR SYSTEM Apex is comprised of single cells combined to create a linear system. Like a beehive, each cell is a powerful and precise element that when joined together creates one powerful unit.

7

8 CUSTOM PATTERNS The custom pattern is a geometry lover s dream that enables the ing to be integrated into the architecture in a multitude of ways and to serve as an exciting focal point to the overall design.

9

10

11 APX ANATOMY VERSATILE DESIGN Multiple mounting options allow APEX increased adaptability to varied environments and architectural conditions ARCHITECTURAL AREA ILLUMINATION Optimized fixture spacing provides high performance ambient ing with remarkable versatility INTEGRATED DRIVER OPTIONS.5 OPTIMIZED LED Integral 0-0V dimming driver dims standard to 0% but is available with % dimming. Optional Lutron drivers or DMX and DALI control protocols. Integral IOTA slim W emergency battery pack provides an easy solution for egress compliance. The high power Nichia diode family allows high flux and colour consistency with superior efficiency EASY ON THE EYES 3.35 OPTICAL ADVANTAGE The custom designed optical baffle creates a precise cut-off angle delivering an efficient and controlled beam of experience Extremely small-cell optics create a discrete look with high performing efficiency for a dynamic ing effect ELEMENTS Elements is a simplified product line comprised of 4, 8, and nominal length fixtures that can be joined to create continuous rows. 4 INTEGRATIONS Integrations is a comprehensive product line comprised of nominal length fixtures and standard patterns, available in 6 increments, with a minimum nominal length of. N 8 R CUSTOM MODULES Configure a variety of straight and corner modules with various optics in a single housing to create rows or patterns with enhanced adaptability. CUSTOM A completely custom ordering process allowing unique modifications and non-90 transitions is available through collaboration with Design Assist. ANATOMY ALIGHTS.COM

12 APX PHOTOMETRY LIGHT OUTPUT DISTRIBUTION Direct Symmetric PHOTOMETRIC DATA DIRECT SYMMETRIC LH K - 55º Lumens: 07 lm/ft Input watts: 4. W/ft Efficacy: 7 lm/w LH OUTPUT LH: High output -4 W/ft (º and 55º) LH: High output - 0 W/ft (HE) LS: Standard output -7 W/ft (º and 55º) LS: Standard output - 5 W/ft (HE) DIRECT SYMMETRIC LH K - º Lumens: 30 lm/ft Input watts: 4. W/ft Efficacy: 9 lm/w LH LIGHT LOSS FACTORS LH: Baseline LS: 50% 4000K: Baseline 3500K: 97% 3000K: 93% 80+CRI: Baseline 90+CRI: 80% DIRECT SYMMETRIC LH K - HE Tech Lumens: 539 lm/ft Input watts: 9.9 W/ft Efficacy: 54 lm/w LH SAMPLE INSTALLATION - WORKSPACE LH / 4000K / 55º Room dimensions: 8 X 0 X 9 Reflectance: 80% / 50% / 0% Mounting height: 9 ft A.F.F. Fixture length: ft Calculation grid: ft x ft Calculation plane (horizontal):.5 ft A.F.F. Average Illuminance: 3 fc Uniformity:.64 (avg/min) 8ft ft TOP VIEW 30 fc 5 fc PHOTOMETRY ALIGHTS.COM

13 APX MOUNTING (S) Aircraft Cable (P) Rigid Stem (PV) Swivel Stem (F) Ceiling Mount (J) Span (JS) Partial Span (G) Flush Gyp/Hard Lid (XP) Trim Flange (T) T-bar 9/6 (X) T-bar 5/6 (N) T-bar 9/6 Slot ELEMENTS MOUNTING LENGTHS Suspension 46.0 RECESSED OPTIONS APX5 Overall Lit Section Nominal 4' 9.90 T-Bar Nominal 8' Nominal ' APX6 Gypsum.45 Lit Section T-Bar MOUNTING ALIGHTS.COM 3

14 APX PATTERNS HOUSING APX3 STANDARD PATTERNS CORNER DETAIL Welded corner (PL) (PU) (PR) Joining pins HOUSING APX5 STANDARD PATTERNS CUSTOM PATTERNS (PLCW) Wall to ceiling (PLWW) Wall to wall (PLW) Wall only (PC) Custom pattern *Contact Design Assist 3 3 (PLC) Ceiling only (PUWW) Wall to wall to wall (PUCW) Wall to ceiling to wall (PUW) Wall only (PUC) Ceiling only (PRW) Wall only 4 3 (PRC) Ceiling only 4 PATTERNS ALIGHTS.COM

15 APX MODULES Configure row and patterns using a variety of and 4 straight modules and corner modules. MODULE TYPES A 4 A Full Light, NO Filler B B Light at Ends, Filler in Middle C C Filler at Ends, Light in Middle D D E Filler Panel Only, NO Light *Available in any Length. Filler at Ends + Middle, Intermidiate Light Section OPTIC TYPES SENSOR PANEL DIMENSIONS HE MODULES LENGTHS without fixture housing EOR End / Begining of row APEX with Endcap MOR Middle of row APEX do not include endcaps. MODULES ALIGHTS.COM 5

16 APX CORNERS MODULE CORNER PATTERNS A Full Light, No Filler x HE Only D Filler Panel Only, No Light x, x Direct (LD) A Full Light, No Filler x D Filler Panel Only, No Light x, x Inside (LI) A Full Light, No Filler x HE Only D Filler Panel Only, No Light x, x Outside (LO) 6 CORNERS ALIGHTS.COM

17 APX TECHNICAL DATA LINEAR DIMENSIONS Elements - 4, 8, and nominal length individual fixtures that can be joined to create continuous row lengths. The APX6 tbar fixture features a pan that fits into a x tbar opening with a 0.5 drop from the ceiling surface with a ed section. Integrations - Exact lengths to the nearest /6 of an inch available as individual fixtures or joined to create continuous row lengths, minimum fixture lengths is. Overall ed length must be in 6 increments. Custom modules - Configure a variety of straight and corner modules with various optics in a single housing to create rows or patterns with enhanced adaptability. Custom - Contact Design Assist for modifications to product not detailed within Elements or Integrations specification sheets. Filler panel - Lengths are nominal. All precise blank panel lengths will be determined by factory to accommodate for row length variations due to ceiling type and to allow for proper ventiliation. OPTICS Custom designed and manufactured optical system comprised of a Total Internal Reflecting (TIR) optic used in conjunction with a primary absorbing baffle that is set into a secondary regressed baffle trim. System optics provide high efficiency with a 55 sharp cut-off (half-angle from Nadir), º angle and a 55 FWHM angle. He Tech patented high efficacy extruded diffuse acrylic lens technology delivers superior lumen output with optimal uniform lens surface luminance for direct distribution. LED LIGHT SOURCE Custom manufactured linear board array uses high performance Nichia LED in combination with a performance driven heat sink technology. Tested in accordance with LM-79 and LM-80; L70>60,0000hr; operated at reduced output for high efficacy and lumen maintenance. 3000K, 3500K, and 4000K with 80+ CRI standard; other color temperatures and 90+ CRI available upon request, contact factory. LED color variation maintained at a 3-step MacAdam ellipse (SDCM 3x). Refer to photometry for delivered lumens. LED DIMMING DRIVER Factory tuned constant current electronic 0-0V control dimming driver is standard. Specification grade dimming down to %. Driver life of 50,000 hrs with ambient operating temperature range of -30 C to 50 C, maximum case temperature of 75 C. Electrical specifications at maximum driver load: PF >0.9, THD <0%, >85% Efficiency. Other available drivers include Lutron Eco-system H-series (LDE): Hi-lume % LED dimming driver with Soft On, Fade to Black; and DMX and DALI protocol drivers. Other Lutron and specialty drivers available, contact factory. EMERGENCY This luminaire is provided with a factory installed LED emergency ing battery pack for both normal and emergency operation, 0-77v only. This fixture integrated unit contains long-life Ni- Cad recyclable battery, 4 hour charger, and converter circuit. Test switch and charge indicator provided. Test button to be remote located within 3 feet of the luminaire, by others in accordance with local code. Emergency mode provides constant power to a nominal W LED load for a period of 90 minutes, delivering 00 lumens of unwavering illumination throughout the full 90 minute emergency duration. Unless otherwise specified, the emergency battery pack will illuminate one foot end in the direct portion of the fixture. Emergency circuiting provided as a separate circuit from normal power circuit according to NEC requirements, specify circuit length and location. CONTROLS Low-profile integral occupancy and day sensors are available to deliver high performance control in an architecturally pleasing package. Integral occupancy sensor - the sleek Wattstopper FS-05 modular plugin system utilizes a RJ45 connector, low voltage cord, and power pack. Automatic on/off passive infrared (PIR) occupancy sensing control covers a range of 00 square feet for a specified 30 second to 30 minute time delay with an optional ambient day sensing function to hold s off when specified adequate day level is sensed. Factory default time delay of 30 minutes and 0fc level. Settings can be adjusted at the factory or easily in the field. Integral day sensor - the sophisticated Wattstopper FD-30 is a low voltage controller using 0-0VDC input to automatically dim the electric ing system based on day contribution in a 70 field of view to achieve a target illuminance using a sliding setpoint algorithm. This single zone closed loop day harvesting control system utilizes a RJ45 connector, low voltage cord, and power pack. One () LSR-30-S setup remote control to adjust target let levels is provided per order. Combined occupancy and day sensing is achieved using both the FS- 05 and FD-30 for more versatile control functionality including automatic on/off occupancy and day dimming response. Other manufacturer controls may be available for product integration, contact factory. MOUNTING Suspension with aircraft cables or pendant stems, and full or partial span mounting available. Aircraft cable set includes 48 standard length /6 stainless steel adjustable aircraft cables with secure micro grippers to field set suspension length, comes factory installed in fixture. 4-/ x 4-/ square white canopies. Cord strain also included. Power cord options available for aircraft cable. Black power cord provided for satin black and a anium finish, white power cord provided for all other fixture finishes unless otherwise specified. TECHNICAL DATA ALIGHTS.COM

18 APX TECHNICAL DATA MOUNTING CONTD. Rigid pendant stem set includes /4 hollow white threaded rod for suspension and power feed, standard specification length, minimum. 5 square mono point white canopies. Swivel stem set includes /4 hollow white threaded rod for suspension and power feed, standard specification length, minimum. 5 square mono point white 45 degree angle swivel stem. Specify if other suspension length is required. Canopies provided as required for quantity of power feed and non power feed locations (crossbar included). Specify if other shape, size, or color is required. Surface mounting fixture mounts directly to surface requiring field drilled mounting and power feed holes. Factory pre-drilled holes can be drilled and tapped for ½ chase nipple, submit dimension requirements when ordering. Partial/Full span mounting conditions utilize special expansion joint end caps to mount fixture to wall (blocking required) and feed power through the end cap, specify end feed location. Additional attachment hardware provided as required depending on partial span condition. Provide architectural details at time of ordering for inclusion in factory shop drawings; field verified dimensions required for full span mounting. FINISH Electrostatically applied powder coat finish. Standard finish options include aanium, satin white, and satin black. Apex6 only available in textured white. Other colors and custom finish options available, specify RAL# or contact factory regarding custom finish requirement. Filler panel finish: Electrostatically applied post powder coat module finish. Color will match extruded baffle finish. LISTING IC Rated for IC, Airtight, CCEA Ceilings. CCEA mark applied for Chicago Plenum applications. UL/CUL rated for Damp Locations. Tested in accordance with UL 598 and certified to CEC/CSA C., NEC, ANSI/ NFPA 70, and NOM-00-SEDE. WARRANTY Limited defect-free manufactured equipment warranty provided under normal use and proper storage for a period of one () year. LED products (LED boards and drivers) will be covered for a period of five (5) years. Please refer to full terms and conditions on our website. Common recessed mounting options available. Contact factory for applications regarding modified recessed mounting conditions. Flush Gypsum Flange. Raw aluminum flange is attached to blocking (by others), then mudded over and/or painted by installing contractor to provide a flangeless fixture appearance in recessed ceiling/wall applications. Trim Flange. / wide visible powder coated flange, specify finish requirement. Fixture is mounted to structure using threaded rod (by others) or ceiling tie wires (provided). Use of a-clamp secures fixture trim and housing around ceiling/wall material. Use for any gypsum or hard ceiling/ wall that requires a minimal flange covering the ceiling cut-out edge. T-Bar/Grid Ceiling. 9/6 or 5/6 standard T-Bar or 9/6 slot ceiling. Raw aluminum flange sits on T-Bar and is concealed from view. STRUCTURE Robust, high quality 60% recycled aluminum extruded housing thick aluminum internal gear trays. Flat or flanged aluminum end caps. Aluminum joiner brackets. 4 lbs/ft approximate fixture weight. Filler Panel Construction: Formed, aluminum cover, painted matte black. Filler panel replaces engine and is aligned on the same plane as adjacent baffle cells. 3 TECHNICAL DATA ALIGHTS.COM

19 378 MARITIME WAY, OCEANSIDE, CA ALIGHTS.COM/APX3