LED Luminaires 38 W W W. F I N E L I T E. C O M

Transcription

1 LED Luminaires 38 W W W. F I N E L I T E. C O M

2 p. 38 p. 46 p. 62 HO4 Collection HP-2 Collection HP-4 Collection p. 78 p. 84 p. 90 HP-6 Collection Elements Collection (E1 & E2) Perimeter Collection (HP-WS & HP-WG) p. 96 p. 110 p. 118 HPR-LED Collection S16 Collection S12 Collection p. 126 p. 132 p. 136 S18 Collection S17 Collection (ACF & VCF) S11 Cove Lighting Collection (MS, MP & MF) p. 146 p. 150 Dims To OFF p. 154 Curve - Desk Lamp Reach - Desk Lamp Edge - Undercabinet p. 158 Muro - Vertical Illumination W W W. F I N E L I T E. C O M 39

3 HO4 Collection Bringing unparalleled performance and beauty to every space. HO4 s reflector uses state-of-the-art polymer material to achieve enhanced luminaire results, including higher efficacy and uniformity. 10 Industry Best Year LED Warranty 40 W W W. F I N E L I T E. C O M

4 HO4 Features Integral Driver Reduce installed cost with fewer feed locations. Thin Rails Holds replaceable LED arrays for long life. Rectilinear Shape Inner optical design follows the form of exterior housing. Reflector Design Grayscale texturing enhances internal visual transition. Optical Solutions Available in direct and uplight/downlight distributions. Unique Polymer Reflector State-of-the-art material improves performance and reduces the presence of seams. Endcaps Artistically tapered open or closed styles. Family of Products Direct Recessed Surface Mount Uplight/Downlight W W W. F I N E L I T E. C O M 41

5 HO4 D Dimensions Sculpted Endcap Solid Endcap 1/2" 3" Specifications CONSTRUCTION: Precision-cut extruded aluminum body. Internal joiner system, plug-together wiring, standard. ENDCAPS: Sculpted open endcap extends the look of the open luminaire. Adds 1/ to length. Solid diecast aluminum endcaps close in form and add 1/ to each end of luminaire. REFLECTORS: High diffuse polymer reflector with matte white finish. UV stable, abrasion resistant, and anti-static. DOWNLIGHT OPTION: Direct distribution is totally open with unique polymer reflector material that helps define the rectilinear form. LIGHT OUTPUT: Four lumen packages available, Standard (S), Boosted Standard (B), High (H), and Very High (V). A separate chart summarizes lumen distribution and wattage. Light engines are replaceable. ELECTRICAL: Optional emergency to generator/inverter wiring, internal generator transfer switch, nightlight wiring, step-dimming driver, backup battery. Factory-choice low-profile backup battery available. 8' minimum luminaire length for low profile battery pack. Bodine BSL722 battery pack also available; 4' minimum luminaire length. Backup batteries deliver 2000 lumens. Half of a 4' (one side) section will be illuminated in EM mode. INTEGRATED SENSORS: Integrated PIR Occupancy and Daylight sensors from a variety of manufacturers can be integrated into the luminaire. MOUNTING: 50" Fully Adjustable (FA) plated steel aircraft cable with safety stop hardware standard. Contact factory for additional lengths up to 150". Suspension points adjust up to 2' in from the end of 8' or 12' luminaire lengths and up to 1' in on shorter lengths. FINISHES: Finelite Signal White powder coat standard. Optional Adders: 185 RAL colors. FEED: Standard with one 18-gauge/5-conductor single-circuit feed. 14-gauge feed used when luminaire current exceeds 5 amps. LENGTHS: Any lengths, 2-foot minimum, in 1' increments. 12-foot maximum section length. WEIGHT: 2.8 lb/ft. WARRANTY: 10-year performance-based warranty on all standard components. Optional accessories such as emergency battery packs are covered by their individual manufacturer warranties. PHOTOMETRY - HO4-D-RO-4ft-V-835-OPN Very High Output - 4' Luminaire Efficacy: 116 lumens per watt Total luminaire output: 4060 lumens (1015 lumens/foot) 35 watts (8.8 watts/foot) Peak Candela Value: 0 CCT: 3500K; CRI: 80 ITL LM79 Report: CANDELA DISTRIBUTION Flux W W W. F I N E L I T E. C O M

6 HO4 R Dimensions HO4 Recessed 1/2" 3" Specifications CONSTRUCTION: Precision-cut extruded aluminum body. Internal joiner system, Plug-together wiring, standard. ENDCAPS: Solid diecast aluminum endcaps close in form and add 1/ to each end of luminaire. RELFECTORS: High diffuse polymer reflector with matte white finish. UV stable, abrasion resistant, and anti-static. DOWNLIGHT OPTION: Direct distribution is totally open with unique polymer reflector material that helps define the rectilinear form. LIGHT OUTPUT: Four lumen packages available, Standard (S), Boosted Standard (B), High (H), and Very High (V). A separate chart summarizes lumen distribution and wattage. Light engines are replaceable. ELECTRICAL: Optional emergency to generator/inverter wiring, internal generator transfer switch, nightlight wiring, step-dimming driver, backup battery. Factory-choice low-profile backup battery available. Chicago Plenum option. 8' minimum luminaire length for low profile battery pack. Bodine BSL722 battery pack also available; 4' minimum luminaire length. Backup batteries deliver 2000 lumens. Half of a 4' (one side) section will be illuminated in EM mode. INTEGRATED SENSORS: Integrated PIR Occupancy and Daylight sensors from a variety of manufacturers can be integrated into the luminaire. MOUNTING: Standard bracket design works with most lay-in ceiling types. Brackets secure luminaire to the ceiling grid from above. Tie-in T-Bar brackets connect the luminaire to the T-Bar for securing to structure. Consult local codes for tie-wire recommendations. FINISHES: Finelite Signal White powder coat standard. Optional Adders: 185 RAL colors. FEED: Standard with one 18-gauge/5-conductor single-circuit feed. 14-gauge feed used when luminaire current exceeds 5 amps. Optional 6' flex conduit whips available. LENGTHS: Any lengths, 2-foot minimum, in 1' increments. 12-foot maximum section length. WEIGHT: 2.8 lb/ft. WARRANTY: 10-year performance-based warranty on all standard components. Optional accessories such as emergency battery packs are covered by their individual manufacturer warranties. PHOTOMETRY - HO4-R-RO-4ft-V-835-OPN Very High Output - 4' Luminaire Efficacy: 114 lumens per watt Total luminaire output: 3991 lumens (998 lumens/foot) 35 watts (8.8 watts/foot) Peak Candela Value: 0 CCT: 3500K; CRI: 80 ITL LM79 Report: CANDELA DISTRIBUTION Flux W W W. F I N E L I T E. C O M 43

7 HO4 UD Dimensions HO4 Uplight/Downlight 1/2" 3" Specifications CONSTRUCTION: Precision-cut extruded aluminum body. Internal joiner system, plug-together wiring, standard. ENDCAPS: Sculpted open endcap extends the look of the open luminaire. Adds 1/ to length. Solid diecast aluminum endcaps close in form and add 1/ to each end of luminaire. REFLECTORS: High diffuse polymer reflector with matte white finish. UV stable, abrasion resistant, and anti-static. UPLIGHT OPTION: Uplight option includes hidden LED arrays and diffuser. Diffuser eliminaires striations possible with LED light source. DOWNLIGHT OPTION: Direct distribution is totally open with unique polymer reflector material that helps define the rectilinear form. LIGHT OUTPUT: Four lumen packages available, Standard (S), Boosted Standard (B), High (H), and Very High (V). A separate chart summarizes lumen distribution and wattage. Light engines are replaceable. ELECTRICAL: Optional emergency to generator/inverter wiring, internal generator transfer switch, nightlight wiring, step-dimming driver, backup battery. Factory-choice low-profile backup battery available. 8' minimum luminaire length for low profile battery pack. Bodine BSL722 battery pack also available; 4' minimum luminaire length. Backup batteries deliver 2000 lumens. Half of a 4' (one side) section will be illuminated in EM mode. INTEGRATED SENSORS: Integrated PIR Occupancy and Daylight sensors from a variety of manufacturers can be integrated into the luminaire. MOUNTING: 50" Fully Adjustable (FA) plated steel aircraft cable with safety stop hardware standard. Contact factory for additional lengths up to 150". Suspension points adjust up to 2' in from the end of 8' or 12' luminaire lengths and up to 1' in on shorter lengths. FINISHES: Finelite Signal White powder coat standard. Optional Adders: 185 RAL colors. FEED: Standard with one 18-gauge/5-conductor single-circuit feed controlling uplight and downlight together (power and dimming). Specify dual feeds for independent control of uplight and downlight. 14-gauge feed used when luminaire current exceeds 5 amps. LENGTHS: Any lengths, 2-foot minimum, in 1' increments. 12-foot maximum section length. WEIGHT: 2.8 lb/ft. WARRANTY: 10-year performance-based warranty on all standard components. Optional accessories such as emergency battery packs are covered by their individual manufacturer warranties. PHOTOMETRY - HO4-UD-RO-V-V-835-OPN Very High Output/Very High Output - 4' Luminaire Distribution: 61% Up (V) / 39% Down (V) Efficacy: 122 lumens per watt Uplight: 5195 lumens (1299 lumens/foot) Downlight: 3374 lumens (844 lumens/foot) Total luminaire output: 8570 lumens (2143 lumens/foot) 70 watts (17.5 watts/foot) CCT: 3500K; CRI: 80 ITL LM79 Report: CANDELA DISTRIBUTION Flux W W W. F I N E L I T E. C O M

8 HO4 SM Dimensions HO4 Surface Mount 1/2" 3" Ceiling Surface Mount Specifications CONSTRUCTION: Precision-cut extruded aluminum body. Internal joiner system, Plug-together wiring, standard. ENDCAPS: Sculpted open endcap extends the look of the open luminaire. Adds 1/ to length. Solid diecast aluminum endcaps close in form and add 1/ to each end of luminaire. RELFECTORS: High diffuse polymer reflector with matte white finish. UV stable, abrasion resistant, and anti-static. DOWNLIGHT OPTION: Direct distribution is totally open with unique polymer reflector material that helps define the rectilinear form. LIGHT OUTPUT: Four lumen packages available, Standard (S), Boosted Standard (B), High (H), and Very High (V). A separate chart summarizes lumen distribution and wattage. Light engines are replaceable. ELECTRICAL: Optional emergency to generator/inverter wiring, internal generator transfer switch, nightlight wiring, step-dimming driver, backup battery. Factory-choice low-profile backup battery available. Chicago Plenum option. 8' minimum luminaire length for low profile battery pack. Bodine BSL722 battery pack also available; 4' minimum luminaire length. Backup batteries deliver 2000 lumens. Half of a 4' (one side) section will be illuminated in EM mode. INTEGRATED SENSORS: Integrated PIR Occupancy and Daylight sensors from a variety of manufacturers can be integrated into the luminaire. MOUNTING: Lay-in ceiling types: caddy clip with 1/4-20 stud and nut. Drywall or concrete surfaces (walls or ceilings): 1/4-20 stud and nut (provided by others). FINISHES: Finelite Signal White powder coat standard. Optional Adders: 185 RAL colors. FEED: Standard with one 18-gauge/5-conductor single-circuit feed. 14-gauge feed used when luminaire current exceeds 5 amps. LENGTHS: Any lengths, 2-foot minimum, in 1' increments. 12-foot maximum section length. WEIGHT: 2.8 lb/ft. WARRANTY: 10-year performance-based warranty on all standard components. Optional accessories such as emergency battery packs are covered by their individual manufacturer warranties. PHOTOMETRY - HO4-SM-4ft-V-835-OPN Very High Output - 4' Luminaire Efficacy: 116 lumens per watt Total luminaire output: 4060 lumens (1015 lumens/foot) 35 watts (8.8 watts/foot) Peak Candela Value: 0 CCT: 3500K; CRI: 80 ITL LM79 Report: CANDELA DISTRIBUTION Flux W W W. F I N E L I T E. C O M 45

9 46 W W W. F I N E L I T E. C O M

10 HO4 Collection Ordering Guide HO4-UD - RO - 32' - S - H F - OPN - 120V - SC - FA - OE - C1 - OBO Finelite HO4 (D - Direct, R - Recessed, UD - Uplight/Downlight, SM - Surface Mount) Luminaire Style (RO - Rectilinear Open) Length (Minimum 2', in 1' increments) Uplight Output (S - Standard, B - Boosted Standard, H - High, V - Very High) Downlight Output (S - Standard, B - Boosted Standard, H - High, V - Very High) LED CRI/CCT ( CRI min, 3000K; CRI min, 3000K; CRI min, 3500K; CRI min, 3500K; CRI min, 4000K; CRI min, 4000K) Uplight Option¹ (F - Flush) Downlight Option (OPN - Open) Voltage (120V, 277V) Circuiting² (SC - Single Circuit, DC - Dual Circuit)¹ Mounting 3 (FA - Fully Adjustable, FM - Flexible Mounting 4 ) Endcap (OE - Open Endcap (standard) 5, SE - Solid Endcap) Ceiling Type (C1-1" T-Bar, C2-9/16" T-Bar, C3 - screw slot, C3F - flush screw slot, C4 - hard ceiling 1, VF - Visible Flange, C2T - 9/16" Tegular, SF - Spackle Flange) Integrated Sensor (OBO - Occupancy Sensor, OBD - Daylight) 1 Available for UD only 2 Contact factory for switching options 3 Available for D and ID only 4 Available for D only 5 Available for D, SM, and UD only W W W. F I N E L I T E. C O M 47

11 High Performance 2" Aperture LED Collection Slender but powerful, HP-2 expands the designer s palette with 2" wide lines of light. Now with Tailored Lighting and Tunable White options, the design flexibility of these lines of light makes what s custom for some manufacturers, standard for Finelite. This affordable collection uses mid-powered LEDs to yield long life and continuous, uniform illumination. Another in Finelite s portfolio of energy efficient, sustainably and domestically manufactured LED luminaires. 10 Industry Best Year LED Warranty 48 W W W. F I N E L I T E. C O M

12 Project: CAS Architects, Inc. Location: Mountain View, CA Architect: CAS Architects Product: HP-2 D Representative: Associated Lighting Representatives W W W. F I N E L I T E. C O M 49

13 HP-2 Features Tailored Output Optimize lighting levels to accommodate architectural design elements and code requirements. Tailored Control Dim and tune the lighting to fit user preference. Integrate sensors to respond to the environment. Tailored Lengths Enhance architectural interiors with perfectly sized luminaires. Tailored Angles Lines of light conform to the architecture with precision mitered corners. Tailored Color Tune white light and intensity to the preference of the people in the space. Performance Delivering up to 107 lumens per watt. Widespread Optic (ID & I Only) Optional uplight widespread optical distribution allows luminaires to be spaced farther apart with improved ceiling uniformity. On-Grid Mounting On-Grid mounting for luminaires in standard lengths makes installation quick and easy. Top Glow and Bottom Glow Top Glow and Bottom Glow extend the diffuser 1/4 inch above or below the luminaire body and add a clean, continuous line of light along the uplight or downlight elements. Family of Products Indirect/Direct Pendant* Direct Pendant Indirect Pendant* Indirect/Direct Wall Mount Direct Wall Mount Indirect Wall Mount Recessed Surface Mount Wall Wash *Optional uplight Widespread Optics (WSO) available. 50 W W W. F I N E L I T E. C O M

14 HP-2 ID Dimensions 3/16" Top Glow Diffuser (Standard) Uplight and Downlight Dimming Diffuser Options Top Glow Diffuser (Standard) Bottom Glow Diffuser* (Optional) Flush Uplight Diffuser (Optional) 4-3/ Widespread Optic with Top Glow Widespread Optic (Contact Factory) Edge Diffuser 4-3/ 4-3/ 4-3/ 3/16" 2-1/ Bottom Glow Diffuser (Standard) 2-1/ Flush Uplight and Downlight Diffuser 2-1/ 2-1/ Specifications CONSTRUCTION: Precision-cut 6061-T6 extruded aluminum body. Internal joiner system, plug-together wiring, standard. ENDCAPS: Flat diecast aluminum endcaps add 1/ to each end of luminaire. MITERED CORNER: Illuminated 90 corners in a single plane, with Top Glow or Flush uplight diffuser, and/or Flush downlight diffuser, standard. Custom angles are available (90 minimum on inside corners), contact factory. REFLECTORS: Die-formed 24-gauge cold-rolled steel reflectors are finished in 96 LG high reflectance matte white powder coat paint. UPLIGHT DIFFUSER: 12' maximum diffuser length. Top Glow frost white diffuser standard, 73% transmissive,99% diffusion. Internal secondary diffusers at corners ensure visually seamless, uniform, continuous illumination. Optional: Flush frost white snap-in diffuser, 73% transmissive, 99% diffusion. Widespread Optic (WSO) and Widespread Optic with Top Glow (WSOTG) option. WSO enables increased luminaire spacing with improved ceiling uniformity. Contact factory for additional details. DOWNLIGHT DIFFUSER: 12' maximum diffuser length. Flush frost white snap-in diffuser standard, 73% transmissive, 99% diffusion. Internal secondary diffusers at corners ensure visually seamless, uniform, continuous illumination. Optional: Bottom Glow frost white snap-in diffuser option, 73% transmissive, 99% diffusion. LIGHT OUTPUT: Four lumen packages available, Standard (S), Boosted Standard (B), High (H), and Very High (V). For lengths 3 feet and greater, the uplight and downlight can be specified with different lumen packages and dual controls. A separate chart summarizes lumen distribution and wattage. Light engines are replaceable. PHOTOMETRY 4' Luminaire Very High Output/Very High Output Distribution: 55% Up (V) / 45% Down (V) Efficacy: 95 lumens per watt Uplight: 3813 lumens (953 lumens/foot) Downlight: 3175 lumens (794 lumens/foot) Total luminaire output: 6988 lumens(1747 lumens/foot) 73.8 watts (18.5 watts/foot) CCT: 3500K ITL LM79 Report: CANDELA DISTRIBUTION Flux *Extends 3/16" from the bottom LUMEN MAINTENANCE: 90% of initial light output (L90) at 100,000+ hours; 70% of initial light output (L70) at 200,000+ hours. ELECTRICAL: Optional emergency to generator/inverter wiring, internal generator transfer switch, nightlight wiring, step-dimming driver, backup battery. Factory-choice low-profile backup battery available. 12' minimum luminaire length for low profile battery pack. Backup batteries deliver 1000 lumens. Half of a 4' section will be illuminated in emergency mode. INTEGRATED SENSORS: Integrated PIR (Passive Infrared) occupancy and/or daylight sensors available. Refer to Occupancy Sensor and Daylight Sensor tech sheets for more info. MOUNTING: 50" Fully Adjustable (FA) plated steel aircraft cable with safety stop hardware standard. Contact factory for additional lengths up to 150". FINISHES: Finelite Signal White powder coat standard. Optional Adders: 185 RAL colors. FEED: Standard with one 18-gauge/5-conductor single-circuit feed controlling uplight and downlight together (power and dimming). Specify dual feeds for independent control of uplight and downlight. 14-gauge feed used when luminaire current exceeds 5 amps. LENGTHS: Any length, 2-foot minimum, in increments down to 1/16th-inch (± 1/32"). 12-foot maximum section length. WEIGHT: 2.9 lb/ft. WARRANTY: 10-year performance-based warranty on all standard components. Optional accessories such as emergency battery packs are covered by their individual manufacturer warranties. PHOTOMETRY 4' Luminaire WIDESPREAD OPTIC HP-2-I-V-835-WSO Very High Output Efficacy: 111 lumens per watt Total luminaire output: 4018 lumens (1005 lumens/foot) 36.3 watts (9.1 watts/foot) Peak Candela Value: 135 CCT: 3500K; CRI: 80 ITL LM79 Report CANDELA DISTRIBUTION Flux Protected by one or more US Patents: ; D702,391; D702,390; D700,732; D727,554 S; D727,550 S, D727,551 S W W W. F I N E L I T E. C O M 51

15 HP-2 WM-ID Dimensions 3/16" Top Glow Diffuser (Standard) 1/2" 1/2" Uplight and Downlight Dimming Diffuser Options Bottom Glow Diffuser* (Optional) Specifications 2-1/ Bottom Glow Diffuser (Optional) 2-1/ Flush Uplight and Downlight Diffuser (Standard) *Extends 3/16" from the bottom CONSTRUCTION: Precision-cut 6061-T6 extruded aluminum body. Internal joiner system, plug-together wiring, standard. ENDCAPS: Flat diecast aluminum endcaps add 1/ to each end of luminaire. MITERED CORNER: Illuminated 90 corners in a single plane, with Top Glow or Flush uplight diffuser, and/or Flush downlight diffuser, standard. Custom angles are available (90 minimum on inside corners), contact factory. REFLECTORS: Die-formed 24-gauge cold-rolled steel reflectors are finished in 96 LG high reflectance matte white powder coat paint. UPLIGHT DIFFUSER: 12' maximum diffuser length. Top Glow frost white diffuser standard, 73% transmissive, 99% diffusion. Internal secondary diffusers at corners ensure visually seamless, uniform, continuous illumination. Optional: Flush frost white snap-in diffuser, 73% transmissive, 99% diffusion. DOWNLIGHT DIFFUSER: 12' maximum diffuser length. Flush frost white snap-in diffuser standard, 73% transmissive, 99% diffusion. Internal secondary diffusers at corners ensure visually seamless, uniform, continuous illumination. Optional: Bottom Glow frost white snap-in diffuser option, 73% transmissive, 99% diffusion. LIGHT OUTPUT: Four lumen packages available, Standard (S), Boosted Standard (B), High (H), and Very High (V). A separate chart summarizes lumen distribution and wattage. Light engines are replaceable. LUMEN MAINTENANCE: 90% of initial light output (L90) at 100,000+ hours; 70% of initial light output (L70) at 200,000+ hours. PHOTOMETRY 4' Luminaire Very High Output/Very High Output Distribution: 55% Up (V) / 45% Down (V) Efficacy: 95 lumens per watt Uplight: 3843 lumens (961 lumens/foot) Downlight: 3145 lumens (786 lumens/foot) Total luminaire output: 6988 lumens (1747 lumens/foot) 73.8 watts (18.5 watts/foot) CCT: 3500K ITL LM79 Report: ELECTRICAL: Optional emergency to generator/inverter wiring, internal generator transfer switch, nightlight wiring, step-dimming driver, backup battery. Factory-choice low-profile backup battery available. 12' minimum luminaire length for low profile battery pack. Backup batteries deliver 1000 lumens. Half of a 4' section will be illuminated in emergency mode. INTEGRATED SENSORS: Integrated PIR (Passive Infrared) occupancy and/or daylight sensors available. Refer to Occupancy Sensor and Daylight Sensor tech sheets for more info. MOUNTING: Luminaire hangs securely from mounting brackets fastened directly to the wall for easy installation. Luminaire stands 1/2" off the wall. The mounting bracket is concealed behind the luminaire. FINISHES: Finelite Signal White powder coat standard. Optional Adders: 185 RAL colors. FEED: Standard with one 18-gauge/5-conductor single-circuit feed controlling uplight and downlight together (power and dimming). Specify dual feeds for independent control of uplight and downlight. 14-gauge feed used when luminaire current exceeds 5 amps. LENGTHS: Any length, 2-foot minimum, in increments down to 1/16th-inch (± 1/32"). 12-foot maximum section length. WEIGHT: 2.9 lb/ft. WARRANTY: 10-year performance-based warranty on all standard components. Optional accessories such as emergency battery packs are covered by their individual manufacturer warranties CANDELA DISTRIBUTION Flux W W W. F I N E L I T E. C O M Protected by one or more US Patents: ; D702,391; D702,390; D700,732; D727,554 S; D727,550 S, D727,551 S

16 HP-2 D Dimensions Flexible Mounting Diffuser Options Bottom Glow Diffuser* (Optional) 2-1/ Flush Downlight Diffuser (Standard) 3/16" 2-1/ Bottom Glow Diffuser (Optional) *Extends 3/16" from the bottom Specifications CONSTRUCTION: Precision-cut 6061-T6 extruded aluminum body. Internal joiner system, plug-together wiring, standard. ENDCAPS: Flat diecast aluminum endcaps add 1/ to each end of luminaire. MITERED CORNER: Illuminated 90 corners in a single plane, with Flush downlight diffuser, standard. Custom angles are available (90 minimum on inside corners), contact factory. REFLECTORS: Die-formed 24-gauge cold-rolled steel reflectors are finished in 96 LG high reflectance matte white powder coat paint. DOWNLIGHT DIFFUSER: 12' maximum diffuser length. Flush frost white snapin diffuser standard, 73% transmissive, 99% diffusion. Internal secondary diffusers at corners ensure visually seamless, uniform, continuous illumination. Optional: Bottom Glow frost white snap-in diffuser option, 73% transmissive, 99% diffusion. LIGHT OUTPUT: Four lumen packages available, Standard (S), Boosted Standard (B), High (H), and Very High (V). A separate chart summarizes lumen distribution and wattage. Light engines are replaceable. LUMEN MAINTENANCE: 90% of initial light output (L90) at 100,000+ hours; 70% of initial light output (L70) at 200,000+ hours. INTEGRATED SENSORS: Integrated PIR (Passive Infrared) occupancy and/or daylight sensors available with Flush and Bottom Glow downlight diffusers. Refer to Occupancy Sensor and Daylight Sensor tech sheets for more info. MOUNTING: 50" Fully Adjustable (FA) plated steel aircraft cable with safety stop hardware standard. Contact factory for additional lengths up to 150". The Flexible Mounting Bracket (FM) adjusts the suspension points to accommodate existing architecture. Suspension points adjust up to 2' in from the end of 8' or 12' luminaire lengths and up to 1' in on shorter lengths. FINISHES: Finelite Signal White powder coat standard. Optional Adders: 185 RAL colors. FEED: Standard with one 18-gauge/5-conductor single-circuit feed. 14-gauge feed used when luminaire current exceeds 5 amps. LENGTHS: Any length, 2-foot minimum, in increments down to 1/16th-inch (± 1/32"). 12-foot maximum section length. WEIGHT: 2.3 lb/ft. WARRANTY: 10-year performance-based warranty on all standard components. Optional accessories such as emergency battery packs are covered by their individual manufacturer warranties. ELECTRICAL: Optional emergency to generator/inverter wiring, internal generator transfer switch, nightlight wiring, step-dimming driver, backup battery. Factory-choice low-profile backup battery available. 8' minimum luminaire length for low profile battery pack. Backup batteries deliver 1000 lumens. Half of a 4' section will be illuminated in emergency mode. PHOTOMETRY 4' Luminaire Very High Output Efficacy: 87 lumens per watt Total luminaire output: 3215 lumens (804 lumens/foot) 36.9 watts (9.2 watts/foot) Peak Candela Value: 0 CCT: 3500K ITL LM79 Report: CANDELA DISTRIBUTION Flux Protected by one or more US Patents: ; D702,391; D702,390; D700,732; D727,554 S; D727,550 S, D727,551 S W W W. F I N E L I T E. C O M 53

17 HP-2 WM-D Dimensions Mounting Bracket (MB) Diffuser Options Bottom Glow Diffuser (Optional) 1/2" 1/2" 2-1/ Flush Downlight Diffuser (Standard) 3/16" 2-1/ Bottom Glow Diffuser (Optional ) *Extends 3/16" from the bottom Specifications CONSTRUCTION: Precision-cut 6061-T6 extruded aluminum body. Internal joiner system, plug-together wiring, standard. ENDCAPS: Flat diecast aluminum endcaps add 1/ to each end of luminaire. MITERED CORNER: Illuminated 90 corners in a single plane, with Flush downlight diffuser, standard. Custom angles are available (90 minimum on inside corners), contact factory. REFLECTORS: Die-formed 24-gauge cold-rolled steel reflectors are finished in 96 LG high reflectance matte white powder coat paint. DOWNLIGHT DIFFUSER: 12' maximum diffuser length. Flush frost white snap-in diffuser standard, 73% transmissive, 99% diffusion. Internal secondary diffusers at corners ensure visually seamless, uniform, continuous illumination. Optional: Bottom Glow frost white snap-in diffuser option, 73% transmissive, 99% diffusion. LIGHT OUTPUT: Four lumen packages available, Standard (S), Boosted Standard (B), High (H), and Very High (V). A separate chart summarizes lumen distribution and wattage. Light engines are replaceable. LUMEN MAINTENANCE: 90% of initial light output (L90) at 100,000+ hours; 70% of initial light output (L70) at 200,000+ hours. INTEGRATED SENSORS: Integrated PIR (Passive Infrared) occupancy and/or daylight sensors available with Flush and Bottom Glow downlight diffusers. Refer to Occupancy Sensor and Daylight Sensor tech sheets for more info. MOUNTING: Luminaire hangs securely from mounting brackets fastened directly to the wall for easy installation. Luminaire hangs 1/2" from wall. Mounting bracket is concealed behind luminaire. FINISHES: Finelite Signal White powder coat standard. Optional Adders: 185 RAL colors. FEED: Standard with one 18-gauge/5-conductor single-circuit feed. 14-gauge feed used when luminaire current exceeds 5 amps. Optional 6 ft. flex conduit whips available. LENGTHS: Any length, 2-foot minimum, in increments down to 1/16th-inch (± 1/32"). 12-foot maximum section length. WEIGHT: 2.3 lb/ft. WARRANTY: 10-year performance-based warranty on all standard components. Optional accessories such as emergency battery packs are covered by their individual manufacturer warranties. ELECTRICAL: Optional emergency to generator/inverter wiring, internal generator transfer switch, nightlight wiring, step-dimming driver, backup battery. Factory-choice low-profile backup battery available. 8'. minimum luminaire length for low profile battery pack. Backup batteries deliver 1000 lumens. Half of a 4' section will be illuminated in emergency mode. PHOTOMETRY 4' Luminaire Very High Output Efficacy: 87 lumens per watt Total luminaire output: 3215 lumens (804 lumens/foot) 36.9 watts (9.2 watts/foot) Peak Candela Value: 0 CCT: 3500K ITL LM79 Report: CANDELA DISTRIBUTION Flux W W W. F I N E L I T E. C O M Protected by one or more US Patents: ; D702,391; D702,390; D700,732; D727,554 S; D727,550 S, D727,551 S

18 HP-2 I Dimensions and Diffuser 3/16" Indirect Dimming Seamless Illumination 2-1/ 2-1/ 2-1/ 2-1/ Top Glow Diffuser (Standard) Flush Uplight Diffuser (Optional) Widespread Optic Widespread Optic with Top Glow Specifications CONSTRUCTION: Precision-cut 6061-T6 extruded aluminum body. Internal joiner system, plug-together wiring, standard. ENDCAPS: Flat diecast aluminum endcaps add 1/ to each end of luminaire. MITERED CORNER: Illuminated 90 corners in a single plane, with Top Glow and Flush uplight diffuser options. Custom angles are available (90 minimum on inside corners), contact factory. REFLECTORS: Die-formed 24-gauge cold-rolled steel reflectors are finished in 96 LG high reflectance matte white powder coat paint. UPLIGHT OPTION: Patented Top Glow frost white diffuser standard. 12' maximum diffuser length. 73% transmissive, 99% diffusion. Internal secondary diffusers at corners ensure visually seamless, uniform, continuous illumination. Optional: Flush frost white snap-in diffuser, 73% transmissive, 99% diffusion; Widespread Optic (WSO) and Widespread Optic with Top Glow (WSOTG) option. WSO enables increased luminaire spacing with improved ceiling uniformity. Contact factory for additional details. LIGHT OUTPUT: Four lumen packages available, Standard (S), Boosted Standard (B), High (H), and Very High (V). A separate chart summarizes lumen distribution and wattage. Light engines are replaceable. LUMEN MAINTENANCE: 90% of initial light output (L90) at 100,000+ hours; 70% of initial light output (L70) at 200,000+ hours. ELECTRICAL: Optional emergency to generator/inverter wiring, internal generator transfer switch, nightlight wiring, step-dimming driver, backup battery. Factory-choice low-profile backup battery available. 8' minimum luminaire length for low profile battery pack. Backup batteries deliver 1400 lumens. Half of a 4' section will be illuminated in emergency mode. INTEGRATED SENSORS: Integrated PIR (Passive Infrared) occupancy and/or daylight sensors available. Refer to Occupancy Sensor and Daylight Sensor tech sheets for more info. MOUNTING: 50" Fully Adjustable (FA) plated steel aircraft cable with safety stop hardware standard. Contact factory for additional lengths up to 150". FINISHES: Finelite Signal White powder coat standard. Optional Adders: 185 RAL colors. FEED: Standard with one 18-gauge/5-conductor single-circuit feed. 14-gauge feed used when luminaire current exceeds 5 amps. LENGTHS: Any length, 2-foot minimum, in increments down to 1/16th-inch (± 1/32"). 12-foot maximum section length. WEIGHT: 2.3 lb/ft. WARRANTY: 10-year performance-based warranty on all standard components. Optional accessories such as emergency battery packs are covered by their individual manufacturer warranties. PHOTOMETRY 4' Luminaire Very High Output Efficacy: 102 lumens per watt Total luminaire output: 3749 lumens (937 lumens/foot) 36.7 watts (9.2 watts/foot) Peak Candela Value: 180 CCT: 3500K, CRI: 80 ITL LM79 Report PHOTOMETRY 4' Luminaire WIDESPREAD OPTIC HP-2-I-V-835-WSO Very High Output Efficacy: 111 lumens per watt Total luminaire output: 4018 lumens (1005 lumens/foot) 36.3 watts (9.1 watts/foot) Peak Candela Value: 135 CCT: 3500K; CRI: 80 ITL LM79 Report CANDELA DISTRIBUTION Flux CANDELA DISTRIBUTION Flux Protected by one or more US Patents: ; D702,391; D702,390; D700,732; D727,554 S; D727,550 S, D727,551 S W W W. F I N E L I T E. C O M 55

19 HP-2 WM-I Dimensions Mounting Bracket (MB) Seamless Illumination 3/16" 1/2" 1/2" 2-1/ 2-1/ Top Glow Diffuser (Standard) Flush Uplight Diffuser (Optional ) Specifications CONSTRUCTION: Precision-cut 6061-T6 extruded aluminum body. Internal joiner system, plug-together wiring, standard. ENDCAPS: Flat diecast aluminum endcaps add 1/ to each end of luminaire. MITERED CORNER: Illuminated 90 corners in a single plane, with Top Glow or Flush uplight diffuser, and/or Flush downlight diffuser, standard. Custom angles are available (90 minimum on inside corners), contact factory. REFLECTORS: Die-formed 24-gauge cold-rolled steel reflectors are finished in 96 LG high reflectance matte white powder coat paint. UPLIGHT DIFFUSER: 12' maximum diffuser length. Top Glow frost white diffuser standard, 73% transmissive, 99% diffusion. Internal secondary diffusers at corners ensure visually seamless, uniform, continuous illumination. Optional: Flush frost white snap-in diffuser, 73% transmissive, 99% diffusion. LIGHT OUTPUT: Four lumen packages available, Standard (S), Boosted Standard (B), High (H), and Very High (V). A separate chart summarizes lumen distribution and wattage. Light engines are replaceable. LUMEN MAINTENANCE: 90% of initial light output (L90) at 100,000+ hours; 70% of initial light output (L70) at 200,000+ hours. INTEGRATED SENSORS: Integrated PIR (Passive Infrared) occupancy and/or daylight sensors available with Flush and Bottom Glow downlight diffusers. Refer to Occupancy Sensor and Daylight Sensor tech sheets for more info. MOUNTING: Luminaire hangs securely from mounting brackets fastened directly to the wall for easy installation. Luminaire stands 1/2" off the wall. The mounting bracket is concealed behind the luminaire. FINISHES: Finelite Signal White powder coat standard. Optional Adders: 185 RAL colors. FEED: Standard with one 18-gauge/5-conductor single-circuit feed. 14-gauge feed used when luminaire current exceeds 5 amps. Optional 6 flex conduit whips available. LENGTHS: Any length, 2-foot minimum, in increments down to 1/16th-inch (± 1/32"). 12-foot maximum section length. WEIGHT: 2.9 lb/ft. WARRANTY: 10-year performance-based warranty on all standard components. Optional accessories such as emergency battery packs are covered by their individual manufacturer warranties. ELECTRICAL: Optional emergency to generator/inverter wiring, internal generator transfer switch, nightlight wiring, step-dimming driver, backup battery. Factory-choice low-profile backup battery available. 8' minimum luminaire length for low profile battery pack. Backup batteries deliver 1400 lumens. Half of a 4' section will be illuminated in emergency mode. PHOTOMETRY 4' Luminaire Very High Output Efficacy: lumens per watt Total luminaire output: 3749 lumens (937 lumens/foot) 36.7 watts (9.2 watts/foot) CCT: 3500K ITL LM79 Report CANDELA DISTRIBUTION Flux W W W. F I N E L I T E. C O M Protected by one or more US Patents: ; D702,391; D702,390; D700,732; D727,554 S; D727,550 S, D727,551 S

20 HP-2 R Dimensions* Seamless Illumination Mitered Angles 90 Wall to Ceiling 2-1/ * See Technical Sheet for cutout dimensions. Specifications CONSTRUCTION: Precision-cut 6061-T6 extruded aluminum body. Internal joiner system, plug-together wiring, standard. Housing is powder coated. ENDCAPS: Flat endcaps at each end of run add 1/8" to overall length. MITERED CORNER: Illuminated 90 corners in a single plane, with Flush downlight diffuser, standard.custom angles are available (90 minimum on inside corners), contact factory. REFLECTORS: Die-formed 24-gauge cold-rolled steel reflectors are finished in 96 LG high reflectance matte white powder coat paint. DOWNLIGHT DIFFUSER: 12' maximum diffuser length. Flush frost white snap-in diffuser standard, 73% transmissive, 99% diffusion. Internal secondary diffusers at corners ensure visually seamless, uniform, continuous illumination. Optional: Frost white snap-in diffuser option, 73% transmissive, 99% diffusion. LIGHT OUTPUT: Four lumen packages available, Standard (S), Boosted Standard (B), High (H), and Very High (V). A separate chart summarizes lumen distribution and wattage. Light engines are replaceable. LUMEN MAINTENANCE: 90% of initial light output (L90) at 100,000+ hours; 70% of initial light output (L70) at 200,000+ hours. INTEGRATED SENSORS: Integrated PIR (Passive Infrared) occupancy and/or daylight sensors available with Flush downlight diffusers. Refer to Occupancy Sensor and Daylight Sensor tech sheets for more info. MOUNTING: Standard bracket design works with most lay-in ceiling types. Brackets secure luminaire to the ceiling grid from above. Tie-in T-Bar brackets connect the luminaire to the T-Bar for securing to structure. Consult local codes for tie-wire recommendations. FINISHES: Finelite Signal White powder coat standard. FEED: Standard with one 18-gauge/5-conductor single-circuit feed. 14-gauge feed used when luminaire current exceeds 5 amps. Optional 6' flex conduit whips available. LENGTHS: Any length, 2-foot minimum, in increments down to 1/16th-inch (± 1/32"). 12-foot maximum section length. WEIGHT: 2.3 lb/ft. WARRANTY: 10-year performance-based warranty on all standard components. Optional accessories such as emergency battery packs are covered by their individual manufacturer warranties. ELECTRICAL: Optional emergency to generator/inverter wiring, nightlight wiring, step-dimming driver, backup battery. Chicago Plenum Option. Factorychoice low-profile backup battery available. 8' minimum luminaire length for low profile battery pack. Backup batteries deliver 1000 lumens. Half of a 4' section will be illuminated in emergency mode. PHOTOMETRY 4' Luminaire Very High Output Efficacy: 89 lumens per watt Total luminaire output: 3287 lumens (822 lumens/foot) 36.9 watts (9.2 watts/foot) Peak Candela Value: 0º CCT: 3500K ITL LM79 Report CANDELA DISTRIBUTION Flux Protected by one or more US Patents: ; D702,391; D702,390; D700,732; D727,554 S; D727,550 S, D727,551 S W W W. F I N E L I T E. C O M 57

21 HP-2 SM Dimensions Diffuser Options Ceiling Surface Mount Bottom Glow Diffuser* (Optional) Horizontal Surface Mount Vertical Surface Mount 2-1/ 3/16" 2-1/ Flush Downlight Diffuser (Standard) Bottom Glow Diffuser (Optional ) *Extends 3/16" from the bottom Specifications CONSTRUCTION: Precision-cut 6061-T6 extruded aluminum body. Internal joiner system, plug-together wiring, standard. ENDCAPS: Flat diecast aluminum endcaps add 1/ to each end of luminaire. MITERED CORNER: Illuminated 90 corners in a single plane, with Flush downlight diffuser, standard. Custom angles are available (90 minimum on inside corners), contact factory. REFLECTORS: Die-formed 24-gauge cold-rolled steel reflectors are finished in 96 LG high reflectance matte white powder coat paint. DOWNLIGHT DIFFUSER: 12' maximum diffuser length. Flush frost white snap-in diffuser standard, 73% transmissive, 99% diffusion. Internal secondary diffusers at corners ensure visually seamless, uniform, continuous illumination. Optional: Bottom Glow frost white snapin diffuser option, 73% transmissive, 99% diffusion. LIGHT OUTPUT: Four lumen packages available, Standard (S), Boosted Standard (B), High (H), and Very High (V). A separate chart summarizes lumen distribution and wattage. Light engines are replaceable. LUMEN MAINTENANCE: 90% of initial light output (L90) at 100,000+ hours; 70% of initial light output (L70) at 200,000+ hours. INTEGRATED SENSORS: Integrated PIR (Passive Infrared) occupancy and/or daylight sensors available with Flush and Bottom Glow downlight diffusers. Refer to Occupancy Sensor and Daylight Sensor tech sheets for more info. MOUNTING: Lay-in ceiling types: caddy clip with 1/ - 20 stud and nut. Drywall or concrete surfaces (walls or ceilings): 1/ - 20 stud and nut (provided by others). FINISHES: Finelite Signal White powder coat standard. Optional Adder: 185 RAL colors. FEED: Standard with one 18-gauge/5-conductor single-circuit feed. 14-gauge feed used when luminaire current exceeds 5 amps. Optional 6' flex conduit whips available. LENGTHS: Any length, 2-foot minimum, in increments down to 1/16th-inch (± 1/32"). 12-foot maximum section length. WEIGHT: 2.3 lb/ft. WARRANTY: 10-year performance-based warranty on all standard components. Optional accessories such as emergency battery packs are covered by their individual manufacturer warranties. ELECTRICAL: Optional emergency to generator/inverter wiring, internal generator transfer switch, nightlight wiring, step-dimming driver, backup battery. Factory-choice low-profile backup battery available. 8' minimum luminaire length for low profile battery pack. Backup batteries deliver 1000 lumens. Half of a 4' section will be illuminated in emergency mode. PHOTOMETRY 4' Luminaire Very High Output Efficacy: 87 lumens per watt Total luminaire output: 3215 lumens (804 lumens/foot) 36.9 watts (9.2 watts/foot) Peak Candela Value: 0 CCT: 3500K ITL LM79 Report CANDELA DISTRIBUTION Flux W W W. F I N E L I T E. C O M Protected by one or more US Patents: ; D702,391; D702,390; D700,732; D727,554 S; D727,550 S, D727,551 S

22 HP-2 WW Dimensions Kicker Reflector Thermal Management 2-1/ 3/8" Mid-powered LEDs T j < 60ºC Specifications CONSTRUCTION: Precision-cut 6061-T6 extruded aluminum body. Internal joiner system, plug-together wiring, standard. ENDCAPS: Flat diecast aluminum endcaps add 1/ to each end of luminaire. REFLECTORS: The standard kicker (K) reflector delivers light high on the vertical surface. The kicker reflector is easily removed for open distribution (FO). DIFFUSER: Luminaires are standard with frosted diffusers. All diffusers are UVstabilized and impact resistant virgin acrylic. Frosted diffusers are 1/16" thick. LIGHT OUTPUT: Four lumen packages available, Standard (S), Boosted Standard (B), High (H), and Very High (V). A separate chart summarizes lumen distribution and wattage. Light engines are replaceable. LUMEN MAINTENANCE: 90% of initial light output (L90) at 100,000+ hours; 70% of initial light output (L70) at 200,000+ hours. ELECTRICAL: Optional emergency to generator/inverter wiring, internal generator transfer switch, nightlight wiring, step-dimming driver, backup battery. Factory-choice low-profile backup battery available. 8' minimum luminaire length for low profile battery pack. Backup batteries deliver 1000 lumens. Half of a 4' section will be illuminated in emergency mode. MOUNTING: 50" Fully Adjustable (FA) plated steel aircraft cable with safety stop hardware standard. Contact factory for additional lengths up to 150". The Flexible Mounting Bracket (FM) adjusts the suspension points to accommodate existing architecture. Suspension points adjust up to 2' in from the end of 8' or 12' luminaire lengths and up to 1' in on shorter lengths. FINISHES: Finelite Signal White powder coat standard. Optional Adders: 185 Tiger Drylac s RAL colors. FEED: Standard with one 18-gauge/5-conductor single-circuit feed. 14-gauge feed used when luminaire current exceeds 5 amps. LENGTHS: Any length, 2-foot minimum, in increments down to 1/16th-inch (± 1/32"). 12-foot maximum section length. WEIGHT: 2.9 lb/ft. WARRANTY: 10-year performance-based warranty on all standard components. Optional accessories such as emergency battery packs are covered by their individual manufacturer warranties. PHOTOMETRY 4' Luminaire Very High Output Efficacy: 77 lumens per watt Total luminaire output: 1500 lumens (375 lumens/foot) 19.6 watts (4.9 watts/foot) Peak Candela Value: 25º CCT: 3500K ITL LM79 Report CANDELA DISTRIBUTION Flux Protected by one or more US Patents: ; D702,391; D702,390; D700,732; D727,554 S; D727,550 S, D727,551 S W W W. F I N E L I T E. C O M 59

23 HP-2 WW AM Dimensions Wall Wash Arm Mount 5" 1" 11", 17", or 23" 1-15/16" 12", 18", or 2 Arm Length 3/8" 2-1/ Specifications CONSTRUCTION: Precision-cut 6063-T6 extruded aluminum body. Internal joiner system, plug-together wiring, standard. ENDCAPS: Flat diecast aluminum endcaps add 1/ to each end of luminaire. REFLECTORS: The standard kicker (K) reflector delivers light high on the vertical surface. The kicker reflector is easily removed for open distribution (FO). DIFFUSER: Luminaires are standard with frosted diffusers. All diffusers are UVstabilized and impact resistant virgin acrylic. Frosted diffusers are 1/16" thick. 12-foot maximum diffuser length. LIGHT OUTPUT: Four lumen packages available, Standard (S), Boosted Standard (B), High (H), and Very High (V). A separate chart summarizes lumen distribution and wattage. Light engines are replaceable. LUMEN MAINTENANCE: 90% of initial light output (L90) at 100,000+ hours; 70% of initial light output (L70) at 200,000+ hours. ELECTRICAL: Optional emergency to generator/inverter wiring, nightlight wiring, internal generator transfer switch, step-dimming driver, backup battery. Factory-choice low-profile backup battery available. 8' minimum luminaire length for low profile battery pack. Backup batteries deliver 1000 lumens. Half of a 4' section will be illuminated in emergency mode. MOUNTING: Arm Mounted (AM) bracket mounts directly to wall j-box, extends luminaire 12", 18", or 2 from wall. Other lengths available. Consult factory. FINISHES: Finelite Signal White powder coat standard. Optional Adders: 185 non-metallic RAL colors. FEED: Standard with one 18-gauge/5-conductor single-circuit feed. 14-gauge feed used when luminaire current exceeds 5 amps. Optional 6' flex conduit whips available. LENGTHS: Any length, 2-foot minimum, in increments down to 1/16th-inch (± 1/32"). 12-foot maximum section length. See run length and mounting location examples on next page. ARM MOUNT SPACING: 12-foot maximum spacing. All luminaire joints require two arm mounts. WEIGHT: 2.9 lb/ft. (Luminaire only). WARRANTY: 10-year performance-based warranty on all standard components. Optional accessories such as emergency battery packs are covered by their individual manufacturer warranties. PHOTOMETRY HP-2 WW-AM-K-B-835 Very High Output - 4' Luminaire with Kicker Efficacy: 77 lumens per watt Total luminaire output: 1500 lumens (375 lumens/foot) 19.6 watts (4.9 watts/foot) Peak Candela Value: 25 CCT: 3500K; 80 CRI ITL LM79 Report: CANDELA DISTRIBUTION Flux W W W. F I N E L I T E. C O M

24 HP-2 WW AM RUN LENGTHS & MOUNTING LOCATION EXAMPLES Tailored Lengths Available Down To 1/16" (±1/32") 2' 2 6" 6" 4' 6" 48" 6" 8' 96" 6" 6" 12'* 14 6" 6" 16' 96" 96" 6" 6" 6" = Bracket Location * = 12' Maximum spacing for two arm mount supports Endcaps Information The Flat Endcap adds 1/ per endcap to the section length. Endcap 1/ *Contact factory for switching options. W W W. F I N E L I T E. C O M 61

25 Project: Banfield Pet Hospital Headquarters Location: Vancouver, WA Architect: Gensler Lighting Designer: Interface Engineers Product: HP-2 D 62 W W W. F I N E L I T E. C O M

26 High Performance 2" Aperture LED Collection Ordering Guide HP-2 ID - 32' - S - H K - TG - F - 120V - SC - FA - C1 - OBO Finelite Series HP-2 (ID - Indirect/Direct, D - Direct, I - Indirect, R - Recessed, SM - Surface Mount) Finelite Series HP-2 WM (ID - Indirect/Direct, D - Direct, I - Indirect) Finelite Series HP-2 WW (D - Direct, R - Recessed, SM - Surface Mount, AM - Arm Mounted) Length (Minimum 2', increments accurate to 1/16" (±1/32", standard) Uplight Output 1 (S - Standard, B - Boosted Standard, H - High, V - Very High) Downlight Output (S - Standard, B - Boosted Standard, H - High, V - Very High) LED CRI/CCT ( CRI min, 3000K; CRI min, 3000K; CRI min, 3500K; CRI min, 3500K; CRI min, 4000K; CRI min, 4000K) Reflector 2 (K - Kicker (standard), FO - Fully Open) Uplight Option (TG - Top Glow (standard), F - Flush, WSO - Wide Spread Optic, WSOTG 10 - Widespread Optic with TopGlow 3 ) 4 Downlight Diffuser Option 3 (F - Flush (standard), BG - Bottom Glow) Voltage (120V, 277V) Circuiting (SC - Single Circuit, DC - Dual Circuit 4 ) 5 Mounting (FA - Fully Adjustable, FM - Flexible Mounting 6, MB - Mounting Bracket 7 ) Mounting Arm Length 8 (AM12-12", AM24-2) Ceiling Type (C1-1" T-Bar, C2-9/16" T-Bar, C3 - screw slot, C3F - flush screw slot, C4 - hard ceiling, VF - Visible Flange, C1T - 1" Tegular, C2T - 9/16" tegular, SF - Spackle Flange, TZ4 (C1, C2, C2T, C3, C3F) - Tech Zone ) Integrated Sensor 9 (OBO - occupancy sensor, OBD - daylight) 1 Available on HP-2 Indirect/Direct and Indirect only 2 Wall Wash only 3 Available on HP-2 Direct, Indirect/Direct, and Surface Mount only 4 Dual Circuit for Indirect/Direct only 5 Available on HP-2 Direct Pendant only 6 Available on HP-2 Wall Mount only 7 Not available for Wall Wash 8 Wall Wash Arm Mounted only 9 Not available for Wall Wash 10 Contact factory for availability W W W. F I N E L I T E. C O M 63

27 High Performance Aperture LED Collection This architectural LED collection delivers uniform and continuous illumination with a clean wide linear aesthetic. Now with Tailored Lighting, the design flexibility of these lines of light makes what s custom for some manufacturers, standard for Finelite. This affordable collection is just one in Finelite s portfolio of energy efficient, sustainably and domestically manufactured LED luminaires. 10 Industry Best Year LED Warranty 64 W W W. F I N E L I T E. C O M

28 Project: Datto, Inc. Location: Norwalk, CT Architect: CPG Architects Product: HP-4 R Representative: Apex Lighting Solutions W W W. F I N E L I T E. C O M 65

29 HP-4 Features Tailored Output Optimize lighting levels to accommodate architectural design elements and code requirements. Tailored Control Dim and tune the lighting to fit user preference. Apply sensors to respond to the environment. Tailored Length Enhance architectural interiors with perfectly sized luminaires. Tailored Angles Lines of light conform to the architecture with precision mitered angles. Tailored Color Tune white light and intensity to the preference of the people in the space. Performance Delivering up to 120 lumens per watt. Widespread Optics (ID & I Only) Optional uplight widespread optical distribution allows luminaires to be spaced further apart with improved ceiling uniformity. On-Grid Mounting On-Grid mounting for luminaires in standard lengths makes installation quick and easy. Top Glow and Bottom Glow Top Glow and Bottom Glow extend the diffuser 1/4 in. above or below the luminaire body and add a clean, continuous line of light along the uplight or downlight elements. Family of Products Indirect/Direct Pendant* Direct Pendant Indirect Pendant* Indirect/Direct Wall Mount Direct Wall Mount Indirect Wall Mount Recessed Regressed Surface Mount Wall Wash *Optional uplight Widespread Optics (WSO) available. 66 W W W. F I N E L I T E. C O M

30 HP-4 ID Indirect/Direct Dimming Seamless Illumination Dimensions and Diffuser 3/16" 4-3/ 4-3/ 3/16" Specifications 3/16" Top Glow (Standard) and Bottom Glow Diffusers Flush Uplight Diffuser (Optional) CONSTRUCTION: Precision-cut 6061-T6 extruded aluminum body. Internal joiner system, plug-together wiring, standard. ENDCAPS: Flat diecast aluminum endcaps add 1/ to each end of luminaire. MITERED CORNER: Illuminated 90 corners in a single plane, with Top Glow or Flush uplight diffuser, and/or Flush downlight diffuser, standard. Custom angles are available (90 minimum on inside corners), contact factory. REFLECTORS: Die-formed 20-gauge cold-rolled steel reflectors finished in 96LG High Reflectance white power coat paint. UPLIGHT OPTION: Patented Top Glow frost white diffuser standard. 12' maximum diffuser length. 73% transmissive, 99% diffusion. Internal secondary diffusers at corners ensure visually seamless, uniform, continuous illumination. Optional: Flush frost white snap-in diffuser, 73% transmissive, 99% diffusion; Widespread Optic (WSO) and Widespread Optic with Top Glow (WSOTG) option. WSO enables increased luminaire spacing with improved ceiling uniformity. DOWNLIGHT OPTIONS: 12' maximum lens length. Flush frost white snap-in lens standard, 73% transmissive, 99% diffusion. Internal secondary diffusers at corners ensure visually seamless, uniform, continuous illumination. Bottom Glow frost white snap-in lens option, 73% transmissive, 99% diffusion. LIGHT OUTPUT: Four lumen packages available; Standard (S), Boosted Standard (B), High (H), and Very High (V). A separate chart summarizes lumen distribution and wattage. Light engines are replaceable. LUMEN MAINTENANCE: 90% of initial light output (L90) at 100,000+ hours; 70% of initial light output (L70) at 200,000+ hours. Widespread Optic ELECTRICAL: Optional emergency to generator/inverter wiring, internal generator transfer switch, nightlight wiring, step-dimming driver, backup battery. Factory-choice low-profile backup battery available. 8' minimum luminaire length for low profile battery pack. Bodine BSL722 battery pack also available; 4 ft. minimum luminaire length. Backup batteries deliver 1300 lumens. Half of a 4 ft. section (downlight only) will be illuminated in emergency mode. INTEGRATED SENSORS: Integrated PIR (Passive Infrared) occupancy and/or daylight sensors available with Flush and Bottom Glow downlight diffusers. Refer to Occupancy Sensor and Daylight Sensor tech sheets for more info. MOUNTING: 50" Fully Adjustable (FA) plated steel aircraft cable with safety stop hardware standard. Contact factory for additional lengths up to 150". FEED: Standard with one 18-gauge/5-conductor single-circuit feed controlling uplight and downlight together (power and dimming). Specify dual feeds for independent control of uplight and downlight. 14-gauge feed used when luminaire current exceeds 5 amps. LENGTHS: Any length, 2-foot minimum, in increments down to 1/16th-inch (±1/32"). 12-foot maximum section length. WEIGHT: 3.4 lb/ft. Widespread Optic with Top Glow DLC QuaLifieD: Configurations of this product are listed on the DLC Qualified Products List (QPL). WARRANTY: 10-year performance-based warranty on all standard components. Optional accessories such as emergency battery packs are covered by their individual manufacturer warranties. PHOTOMETRY 4' Luminaire Very High Output Distribution: 53% Up (V) / 47% Down (V) Efficacy: 106 lumens per watt Uplight: 4180 lumens (1045 lumens/foot) Downlight: 3706 lumens (927 lumens/foot) Total luminaire output: 7886 lumens (1972 lumens/foot) 74.1 watts (18.5 watts/foot) CRI: 80 CCT: 3500K ITL LM79 Report: CANDELA DISTRIBUTION Flux PHOTOMETRY 4' Luminaire WIDESPREAD OPTIC (WSO Very High Output / Very High Output Distribution: 54% Up (V) / 46% Down (V) Efficacy: 107 lumens per watt Uplight: 4229 lumens (1057 lumens/foot) Downlight: 3660 lumens (915 lumens/foot) Total luminaire output: 7889 lumens (1972 lumens/foot) 73.5 watts (18.4 watts/foot) CRI: 80 CCT: 3500K ITL LM79 Report: CANDELA DISTRIBUTION Flux Protected by one or more US Patents: ; D702,391; D702,390; D700,732 W W W. F I N E L I T E. C O M 67

31 HP-4 WM-ID Dimensions 1/2" 1/2" Indirect/Direct Dimming Diffuser Options Top Glow Diffuser (Standard) Bottom Glow Diffuser* (Optional) 3/16" 4-3/ 4-3/ Companion Wall Mount Top Glow Flush Uplight *Extends 3/16" from the bottom Specifications CONSTRUCTION: Precision-cut 6061-T6 extruded aluminum body. Internal joiner system, plug-together wiring, standard. ENDCAPS: Flat diecast aluminum endcaps add 1/ to each end of luminaire. MITERED CORNER: Illuminated 90 corners in a single plane, with Top Glow or Flush uplight diffuser, and/or Flush downlight diffuser, standard. Custom angles are available (90 minimum on inside corners), contact factory. REFLECTORS: Die-formed 20-gauge cold-rolled steel reflectors are finished in 96 LG high reflectance matte white powder coat paint. UPLIGHT DIFFUSER: 12 ft. maximum diffuser length. Top Glow frost white diffuser standard, 73% transmissive, 99% diffusion. Internal secondary diffusers at corners ensure visually seamless, uniform, continuous illumination. Optional: Flush frost white snap-in diffuser, 73% transmissive, 99% diffusion. DOWNLIGHT DIFFUSER: 12 ft. maximum diffuser length. Flush frost white snapin diffuser standard, 73% transmissive, 99% diffusion. Internal secondary diffusers at corners ensure visually seamless, uniform, continuous illumination. Optional: Bottom Glow frost white snap-in diffuser option, 73% transmissive, 99% diffusion. LIGHT OUTPUT: Four lumen packages available, Standard (S), Boosted Standard (B), High (H), and Very High (V). A separate chart summarizes lumen distribution and wattage. Light engines are replaceable. LUMEN MAINTENANCE: 90% of initial light output (L90) at 100,000+ hours; 70% of initial light output (L70) at 200,000+ hours. PHOTOMETRY 4' Luminaire Very High Output/Very High Output Distribution: 53% Up (V) / 47% Down (V) Efficacy: 106 lumens per watt Uplight: 4180 lumens (1045 lumens/foot) Downlight: 3706 lumens (927 lumens/foot) Total luminaire output: 7886 lumens (1972 lumens/foot) 74.1 watts (18.5 watts/foot) CCT: 3500K ITL LM79 Report: ELECTRICAL: Optional emergency to generator/inverter wiring, internal generator transfer switch, nightlight wiring, step-dimming driver, backup battery. Factory-choice low-profile backup battery available. 8 ft. minimum luminaire length for low profile battery pack. Bodine BSL722 battery pack also available; 4 ft. minimum luminaire length. Backup batteries deliver 1300 lumens. Half of a 4 ft. section (downlight only) will be illuminated in emergency mode. INTEGRATED SENSORS: Integrated PIR (Passive Infrared) occupancy and/or daylight sensors available with Flush and Bottom Glow downlight diffusers. Refer to Occupancy Sensor and Daylight Sensor tech sheets for more info. MOUNTING: Luminaire hangs securely from mounting brackets fastened directly to the wall for easy installation. Luminaire stands 1/2" off the wall. The mounting bracket is concealed behind the luminaire. FINISHES: Finelite Signal White powder coat standard. Optional Adders: 185 non-metallic RAL colors. FEED: Standard with one 18-gauge/5-conductor single-circuit feed controlling uplight and downlight together (power and dimming). Specify dual feeds for independent control of uplight and downlight. 14-gauge feed used when luminaire current exceeds 5 amps. Optional 6' flex conduit whips available. LENGTHS: Any length, 2-foot minimum, in increments down to 1/16th-inch (± 1/32"). 12-foot maximum section length. WEIGHT: 2.9 lb/ft. WARRANTY: 10-year performance-based warranty on all standard components. Optional accessories such as emergency battery packs are covered by their individual manufacturer warranties. CANDELA DISTRIBUTION Flux W W W. F I N E L I T E. C O M Protected by one or more US Patents: ; D702,391; D702,390; D700,732

32 HP-4 D Dimensions Flexible Mounting Seamless Illumination Diffuser Options Bottom Glow Diffuser* (Optional) *Extends 3/16" from the bottom Specifications CONSTRUCTION: Precision-cut 6061-T6 extruded aluminum body. Internal joiner system, plug-together wiring, standard. ENDCAPS: Flat diecast aluminum endcaps add 1/ to each end of luminaire. MITERED CORNER: Illuminated 90 corners in a single plane, with Flush downlight diffuser, standard. Custom angles are available (90 minimum on inside corners), contact factory. REFLECTORS: Die-formed 20-gauge cold-rolled steel reflectors finished in 96LG High Reflectance white power coat paint. DIFFUSER: 12' maximum lens length. Flush frost white snap-in lens standard, 73% transmissive, 99% diffusion. Internal secondary diffusers at corners ensure visually seamless, uniform, continuous illumination. Bottom Glow frost white snap-in lens option, 73% transmissive, 99% diffusion. LIGHT OUTPUT: Four lumen packages available, Standard Output (S), Boosted Standard Output (B), High Output (H), and Very High Output (V). A separate chart summarizes lumen distribution and wattage. Light engines are replaceable. LUMEN MAINTENANCE: 90% of initial light output (L90) at 100,000+ hours; 70% of initial light output (L70) at 200,000+ hours. ELECTRICAL: Optional emergency to generator/inverter wiring, internal generator transfer switch, nightlight wiring, step-dimming driver, backup battery. Factory-choice low-profile backup battery available. 8' minimum luminaire length for low profile battery pack. Bodine BSL722 battery pack also available; 4' minimum luminaire length. Backup batteries deliver 1300 lumens. Half of a 4' section will be illuminated in emergency mode. INTEGRATED SENSORS: Integrated PIR (Passive Infrared) occupancy and/or daylight sensors available with Flush and Bottom Glow downlight diffusers. Refer to Occupancy Sensor and Daylight Sensor tech sheets for more info. MOUNTING: 50" Fully Adjustable (FA) plated steel aircraft cable with safety stop hardware standard. Contact factory for additional lengths up to 150". The Flexible Mounting Bracket (FM) adjusts the suspension points to accommodate existing architecture. Suspension points adjust up to 2' in from the end of 8' or 12' luminaire lengths and up to 1' in on shorter lengths. FINISHES: Finelite Signal White powder coat standard. Optional Adders: 185 non-metallic RAL colors. FEED: Standard with one 18-gauge/5-conductor single-circuit feed. 14-gauge feed used when luminaire current exceeds 5 amps. LENGTHS: Any length, 2-foot minimum, in increments down to 1/16th-inch (± 1/32"). 12-foot maximum section length. WEIGHT: 2.8 lb/ft. DLC QuaLifieD: Configurations of this product are listed on the DLC Qualified Products List (QPL). WARRANTY: 10-year performance-based warranty on all standard components. Optional accessories such as emergency battery packs are covered by their individual manufacturer warranties. PHOTOMETRY 4' Luminaire Very High Output Efficacy: 100 lumens per watt Total luminaire output: 3705 lumens (926 lumens/foot) 37 watts (9.3 watts/foot) Peak Candela Value: 0º CCT: 3500K ITL LM79 Report: CANDELA DISTRIBUTION Flux Protected by one or more US Patents: ; D702,391; D702,390; D700,732 W W W. F I N E L I T E. C O M 69

33 HP-4 WM-D Dimensions Mounting Bracket (MB) Seamless Illumination Diffuser Options Bottom Glow Diffuser (Optional) 1/2" *Extends 3/16" from the bottom Specifications CONSTRUCTION: Precision-cut 6061-T6 extruded aluminum body. Internal joiner system, plug-together wiring, standard. ENDCAPS: Flat diecast aluminum endcaps add 1/ to each end of luminaire. MITERED CORNER: Illuminated 90 corners in a single plane, with Flush downlight diffuser, standard. Custom angles are available (90 minimum on inside corners), contact factory. REFLECTORS: Die-formed 20-gauge cold-rolled steel reflectors are finished in 96 LG high reflectance matte white powder coat paint. DOWNLIGHT DIFFUSER: 12' maximum diffuser length. Flush frost white snap-in diffuser standard, 73% transmissive, 99% diffusion. Internal secondary diffusers at corners ensure visually seamless, uniform, continuous illumination. Optional: Bottom Glow frost white snap-in diffuser option, 73% transmissive, 99% diffusion. LIGHT OUTPUT: Four lumen packages available, Standard (S), Boosted Standard (B), High (H), and Very High (V). A separate chart summarizes lumen distribution and wattage. Light engines are replaceable. LUMEN MAINTENANCE: 90% of initial light output (L90) at 100,000+ hours; 70% of initial light output (L70) at 200,000+ hours. INTEGRATED SENSORS: Integrated PIR (Passive Infrared) occupancy and/or daylight sensors available with Flush and Bottom Glow downlight diffusers. Refer to Occupancy Sensor and Daylight Sensor tech sheets for more info. MOUNTING: Luminaire hangs securely from mounting brackets fastened directly to the wall for easy installation. Luminaire hangs 1/2" from wall. Mounting bracket is concealed behind luminaire. FINISHES: Finelite Signal White powder coat standard. Optional Adders: 185 Tiger Drylac s RAL colors. FEED: Standard with one 18-gauge/5-conductor single-circuit feed. 14-gauge feed used when luminaire current exceeds 5 amps. Optional 6 ft. flex conduit whips available. LENGTHS: Any length, 2-foot minimum, in increments down to 1/16th-inch (± 1/32"). 12-foot maximum section length. WEIGHT: 2.3 lb/ft. WARRANTY: 10-year performance-based warranty on all standard components. Optional accessories such as emergency battery packs are covered by their individual manufacturer warranties. ELECTRICAL: Optional emergency to generator/inverter wiring, internal generator transfer switch, nightlight wiring, step-dimming driver, backup battery. Factory-choice low-profile backup battery available. 8' minimum luminaire length for low profile battery pack. Backup batteries deliver 1000 lumens. Half of a 4' section will be illuminated in emergency mode. PHOTOMETRY 4' Luminaire Very High Output Efficacy: 100 lumens per watt Total luminaire output: 3705 lumens (926 lumens/foot) 37 watts (9.3 watts/foot) Peak Candela Value: 0 CCT: 3500K ITL LM79 Report: CANDELA DISTRIBUTION Flux W W W. F I N E L I T E. C O M Protected by one or more US Patents: ; D702,391; D702,390; D700,732

34 HP-4 I Dimensions and Diffuser Indirect Dimming Seamless Illumination 3/16" 3/16" Top Glow Diffuser (Standard) Flush Uplight Diffuser (Optional) Widespread Optic Widespread Optic with Top Glow Specifications CONSTRUCTION: Precision-cut 6061-T6 extruded aluminum body. Internal joiner system, plug-together wiring, standard. ENDCAPS: Flat diecast aluminum endcaps add 1/ to each end of luminaire. MITERED CORNER: Illuminated 90 corners in a single plane, with Top Glow and Flush uplight diffuser options. Custom angles are available (90 minimum on inside corners), contact factory. REFLECTORS: Die-formed 20-gauge cold-rolled steel reflectors are finished in 96 LG high reflectance matte white powder coat paint. UPLIGHT OPTION: Patented Top Glow frost white diffuser standard. 12' maximum diffuser length. 73% transmissive, 99% diffusion. Internal secondary diffusers at corners ensure visually seamless, uniform, continuous illumination. Optional: Flush frost white snap-in diffuser, 73% transmissive, 99% diffusion; Widespread Optic (WSO) and Widespread Optic with Top Glow (WSOTG) option. WSO enables increased luminaire spacing with improved ceiling uniformity. LIGHT ENGINE: Two lumen packages available, Standard Output (SO) or High Output (HO). A separate chart summarizes lumen distribution and wattage. LM79 test reports are available for each distribution. Light engines are replaceable. Visit Finelite.com for more information. LUMEN MAINTENANCE: 90% of initial light output (L90) at 100,000+ hours; 70% of initial light output (L70) at 200,000+ hours. ELECTRICAL: Optional emergency to generator/inverter wiring, internal generator transfer switch, nightlight wiring, step-dimming driver, backup battery. Factory-choice low-profile backup battery available. 8 ft. minimum luminaire length for low profile battery pack. Bodine BSL722 battery pack also available; 4 ft. minimum luminaire length. Backup batteries deliver 1400 lumens. Half of a 4 ft. section will be illuminated in emergency mode. INTEGRATED SENSORS: Integrated PIR (Passive Infrared) occupancy and/or daylight sensors available. Refer to Occupancy Sensor and Daylight Sensor tech sheets for more info. MOUNTING: 50" Fully Adjustable (FA) plated steel aircraft cable with safety stop hardware standard. Contact factory for additional lengths up to 150". FINISHES: Finelite Signal White powder coat standard. Optional Adders: 185 RAL colors. FEED: Standard with one 18-gauge/5-conductor single-circuit feed. 14-gauge feed used when luminaire current exceeds 5 amps. LENGTHS: Any length, 2-foot minimum, in increments down to 1/16th-inch (± 1/32"). 12-foot maximum section length. WEIGHT: 2.8 lb/ft. DLC QuaLifieD: Configurations of this product are listed on the DLC Qualified Products List (QPL). WARRANTY: 10-year performance-based warranty on all standard components. Optional accessories such as emergency battery packs are covered by their individual manufacturer warranties. PHOTOMETRY 4' Luminaire Very High Output Efficacy: 112 lumens per watt Total luminaire output: 4114 lumens (1029 lumens/foot) 37.6 watts (9.4 watts/foot) Peak Candela Value: 180 CCT: 3500K ITL LM79 Report CANDELA DISTRIBUTION Flux PHOTOMETRY 4' Luminaire WIDESPREAD OPTIC (WSO) Very High Output - 4' Luminaire Efficacy: 117 lumens per watt Total luminaire output: 4229 lumens (1076 lumens/foot) 36.8 watts (9.2 watts/foot) CRI: 80 CCT: 3500K ITL LM79 Report (Family correlated file. HP-4 ID report referenced for Indirect) CANDELA DISTRIBUTION Flux Protected by one or more US Patents: ; D702,391; D702,390; D700,732 W W W. F I N E L I T E. C O M 71

35 HP-4 WM-I Dimensions Mounting Bracket (MB) Seamless Illumination 3/16" Specifications CONSTRUCTION: Precision-cut 6061-T6 extruded aluminum body. Internal joiner system, plug-together wiring, standard. ENDCAPS: Flat diecast aluminum endcaps add 1/ to each end of luminaire. MITERED CORNER: Illuminated 90 corners in a single plane, with Top Glow or Flush uplight diffuser, and/or Flush downlight diffuser, standard. Custom angles are available (90 minimum on inside corners), contact factory. REFLECTORS: Die-formed 20-gauge cold-rolled steel reflectors are finished in 96 LG high reflectance matte white powder coat paint. DIFFUSER: Patented Top Glow frost white diffuser standard. 12' maximum diffuser length. 73% transmissive, 99% diffusion. Internal secondary diffusers at corners ensure visually seamless, uniform, continuous illumination. Optional: Flush frost white snap-in diffuser, 73% transmissive, 99% diffusion. LIGHT OUTPUT: Four lumen packages available, Standard (S), Boosted Standard (B), High (H), and Very High (V). A separate chart summarizes lumen distribution and wattage. Light engines are replaceable. LUMEN MAINTENANCE: 90% of initial light output (L90) at 100,000+ hours; 70% of initial light output (L70) at 200,000+ hours. ELECTRICAL: Optional emergency to generator/inverter wiring, internal generator transfer switch, nightlight wiring, step-dimming driver, backup battery. Factory-choice low-profile backup battery available. 12' minimum luminaire length for low profile battery pack. Backup batteries deliver 1000 lumens. Half of a 4 section will be illuminated in emergency mode. INTEGRATED SENSORS: Integrated PIR (Passive Infrared) occupancy and/or daylight sensors available with Flush and Bottom Glow downlight diffusers. Refer to Occupancy Sensor and Daylight Sensor tech sheets for more info. MOUNTING: Luminaire hangs securely from mounting brackets fastened directly to the wall for easy installation. Luminaire stands 1/2" off the wall. The mounting bracket is concealed behind the luminaire. FINISHES: Finelite Signal White powder coat standard. Optional Adders: 185 RAL colors. FEED: Standard with one 18-gauge/5-conductor single-circuit feed controlling uplight and downlight together (power and dimming). Specify dual feeds for independent control of uplight and downlight. 14-gauge feed used when luminaire current exceeds 5 amps. LENGTHS: Any length, 2-foot minimum, in increments down to 1/16th-inch (± 1/32"). 12-foot maximum section length. WEIGHT: 2.9 lb/ft. WARRANTY: 10-year performance-based warranty on all standard components. Optional accessories such as emergency battery packs are covered by their individual manufacturer warranties. PHOTOMETRY 4' Luminaire Very High Output Efficacy: 112 lumens per watt Total luminaire output: 4114 lumens (1029 lumens/foot) 37.6 watts (9.4 watts/foot) Peak Candela Value: 180 CCT: 3500K ITL LM79 Report CANDELA DISTRIBUTION Flux W W W. F I N E L I T E. C O M Protected by one or more US Patents: ; D702,391; D702,390; D700,732

36 HP-4 R & HP-4 RG Dimensions Seamless Illumination Mitered Angles 90 Wall to Ceiling 5" Flush Diffuser 1" 1/ Regressed Diffuser Specifications CONSTRUCTION: Precision-cut 6061-T6 extruded aluminum body. Internal joiner system, plug-together wiring, standard. Housing is powder coated. ENDCAPS: Flat endcaps add 1/16" to each end of luminaire. MITERED CORNER: Illuminated 90 corners in a single plane, with Flush downlight diffuser, standard. Custom angles are available (90 minimum on inside corners), contact factory. REFLECTORS: Die-formed 20-gauge cold-rolled steel reflectors are finished in 96 LG high reflectance matte white powder coat paint. DOWNLIGHT DIFFUSER: 12' maximum diffuser length. Flush frost white snap-in diffuser standard, 73% transmissive, 99% diffusion. Internal secondary diffusers at corners ensure visually seamless, uniform, continuous illumination. Frost white snap-in diffuser option, 73% transmissive, 99% diffusion. LIGHT OUTPUT: Four lumen packages available, Standard (S), Boosted Standard (B), High (H), and Very High (V). A separate chart summarizes lumen distribution and wattage. Light engines are replaceable. LUMEN MAINTENANCE: 90% of initial light output (L90) at 100,000+ hours; 70% of initial light output (L70) at 200,000+ hours. ELECTRICAL: Optional emergency to generator/inverter wiring, internal generator transfer switch, nightlight wiring, step-dimming driver, backup battery. Chicago Plenum option. Factory-choice low-profile backup battery available. 8' minimum luminaire length for low profile battery pack. Bodine BSL722 battery pack also available; 4' minimum luminaire length. Backup battery delivers 1300 lumens. Half of a 4' section will be illuminated in emergency mode. INTEGRATED SENSORS: Integrated PIR (Passive Infrared) occupancy and/or daylight sensors available with Flush downlight diffusers. Refer to Occupancy Sensor and Daylight Sensor tech sheets for more info. MOUNTING: 50" Fully Adjustable (FA) plated steel aircraft cable with safety stop hardware standard. Contact factory for additional lengths up to 150". FEED: Standard with one 18-gauge/5-conductor singlecircuit feed. 14-gauge feed used when luminaire current exceeds 5 amps. Optional 6' flex conduit whips available. LENGTHS: Any length, 2-foot minimum, in increments down to 1/16th-inch (± 1/32"). 12-foot maximum section length. WEIGHT: 2.8 lb/ft. DLC QuaLifieD: Configurations of this product are listed on the DLC Qualified Products List (QPL). WARRANTY: 10-year performance-based warranty on all standard components. Optional accessories such as emergency battery packs are covered by their individual manufacturer warranties. continued... PHOTOMETRY 4' Luminaire Very High Output Efficacy: 101 lumens per watt Total luminaire output: 3726 lumens (932 lumens/foot) 37 watts (9.3 watts/foot) Peak Candela Value: 0 CCT: 3500K ITL LM79 Report CANDELA DISTRIBUTION Flux Protected by one or more US Patents: ; D702,391; D702,390; D700,732 W W W. F I N E L I T E. C O M 73

37 HP-4 R & HP-4 RG SHEET ROCK INSTALLATION Flex conduit is secured on top of luminaire. Support to structure using threaded rod. Threaded rod support holes are located on each end of the luminaire. T-BAR INSTALLATION HP-4 R and HP-4 RG for T-Bar installations comes standard with a splice plate at the end of the luminaire. Mounting brackets (provided) secure the luminaire to T-Bar and provide support to structure. All even foot length (2, 4, 6, etc.) luminaire runs are reduced in length by appropriate amount to fit within typical 2x2 and 2x4 T-Bar systems. For uncommon T-Bar systems, please consult factory. 6" Threaded Rod location for securing to structure CEILING TYPES: 5" 4-5/8" 5" 4-5/8" 1" T-Bar (C1) 9/16" T-Bar (C2) 1" Tegular (C1T) 9/16" Tegular (C2T) 4-5/8" 4-5/8" 6" Flush Screw Slot (C3F) Standard Screw Slot (C3) Tech Zone (TZ6- C1, C2, C2T, C3, C3F) MOUNTING TYPES AND DIMENSIONS: 4-3/ Spackle Flange (SF) 1" 4-1/ Visible Flange (VF) 74 W W W. F I N E L I T E. C O M Protected by one or more US Patents: ; D702,391; D702,390; D700,732

38 HP-4 SM Dimensions Diffuser Options Horizontal Surface Mount Vertical Surface Mount Flush Downlight Diffuser (Standard) 3/16" Bottom Glow Diffuser (Optional ) Ceiling Surface Mount Bottom Glow Diffuser* (Optional) Specifications CONSTRUCTION: Precision-cut 6061-T6 extruded aluminum body. Internal joiner system, plug-together wiring, standard. ENDCAPS: Flat diecast aluminum endcaps add 1/ to each end of luminaire. MITERED CORNER: Illuminated 90 corners in a single plane, with Flush downlight diffuser, standard. Custom angles are available (90 minimum on inside corners), contact factory. REFLECTORS: Die-formed 20-gauge cold-rolled steel reflectors are finished in 96 LG high reflectance matte white powder coat paint. DIFFUSER: 12' maximum diffuser length. Flush frost white snap-in diffuser standard, 73% transmissive, 99% diffusion. Internal secondary diffusers at corners ensure visually seamless, uniform, continuous illumination. Bottom Glow frost white snap-in diffuser option, 73% transmissive, 99% diffusion. LIGHT OUTPUT: Four lumen packages available, Standard (S), Boosted Standard (B), High (H), and Very High (V). A separate chart summarizes lumen distribution and wattage. Light engines are replaceable. LUMEN MAINTENANCE: 90% of initial light output (L90) at 100,000+ hours; 70% of initial light output (L70) at 200,000+ hours. ELECTRICAL: Optional emergency to generator/inverter wiring, internal generator transfer switch, nightlight wiring, step-dimming driver, backup battery. Factory-choice low-profile backup battery available. 8' minimum luminaire length for low profile battery pack. Bodine BSL722 battery pack also available; 4' minimum luminaire length. Backup batteries deliver 1300 lumens. Half of a 4' section will be illuminated in emergency mode. *Extends 3/16" from the bottom INTEGRATED SENSORS: Integrated PIR (Passive Infrared) occupancy and/or daylight sensors available with Flush and Bottom Glow downlight diffusers. Refer to Occupancy Sensor and Daylight Sensor tech sheets for more info. MOUNTING: Lay-in ceiling types: caddy clip with 1/ - 20 stud and nut. Drywall or concrete surfaces (walls or ceilings): 1/ - 20 stud and nut (provided by others). FINISHES: Finelite Signal White powder coat standard. Optional Adder: 185 RAL colors. FEED: Standard with one 18-gauge/5-conductor single-circuit feed. 14-gauge feed used when luminaire current exceeds 5 amps. Optional 6' flex conduit whips available. LENGTHS: Any length, 2-foot minimum, in increments down to 1/16th-inch (± 1/32"). 12-foot maximum section length. WEIGHT: 2.8 lb/ft. WARRANTY: 10-year performance-based warranty on all standard components. Optional accessories such as emergency battery packs are covered by their individual manufacturer warranties. PHOTOMETRY 4' Luminaire Very High Output Efficacy: 100 lumens per watt Total luminaire output: 3705 lumens (926 lumens/foot) 37 watts (9.3 watts/foot) Peak Candela Value: 0 CCT: 3500K ITL LM79 Report CANDELA DISTRIBUTION Flux Protected by one or more US Patents: ; D702,391; D702,390; D700,732 W W W. F I N E L I T E. C O M 75

39 HP-4 WW Dimensions Pendant Mounting Recessed Mounting Surface Mounting 3/8" With Kicker Without Kicker Specifications CONSTRUCTION: Precision-cut 6061-T6 extruded aluminum body. Internal joiner system, plug-together wiring, standard. ENDCAPS: Flat diecast aluminum endcaps add 1/ to each end of luminaire. REFLECTORS: 94% reflective semi-specular reflector (94SS) provides reflectivity and glare control. The standard kicker (K) reflector delivers light high on the vertical surface. The kicker reflector is easily removed for open distribution (FO). DIFFUSER: Luminaires are standard with frosted diffusers. All diffusers are UVstabilized and impact resistant virgin acrylic. Frosted diffusers are 1/8" thick. 12 ft. maximum diffuser length. LIGHT OUTPUT: Four lumen packages available, Standard (S), Boosted Standard (B), High (H), and Very High (V). A separate chart summarizes lumen distribution and wattage. Light engines are replaceable. LUMEN MAINTENANCE: 90% of initial light output (L90) at 100,000+ hours; 70% of initial light output (L70) at 200,000+ hours. ELECTRICAL: Optional emergency to generator/inverter wiring, internal generator transfer switch, nightlight wiring, step-dimming driver, backup battery. Factory-choice low-profile backup battery available. 8' minimum luminaire length for low profile battery pack. Bodine BSL722 battery pack also available; 4' minimum luminaire length. Backup battery delivers 1400 lumens. One 4' section will be illuminated in emergency mode. MOUNTING: 50" Fully Adjustable (FA) plated steel aircraft cable with safety stop hardware standard. Contact factory for additional lengths up to 150". The Flexible Mounting Bracket (FM) adjusts the suspension points to accommodate existing architecture. Suspension points adjust up to 2' in from the end of 8' or 12' luminaire lengths and up to 1' in on shorter lengths. FINISHES: Finelite Signal White powder coat standard. Optional Adders: 185 non-metallic RAL colors. FEED: Standard with one 18-gauge/5-conductor single-circuit feed. 14-gauge feed used when luminaire current exceeds 5 amps. LENGTHS: Any length, 2-foot minimum, in increments down to 1/16th-inch (± 1/32"). 12-foot maximum section length. WEIGHT: 2.9 lb/ft. WARRANTY: 10-year performance-based warranty on all standard components. Optional accessories such as emergency battery packs are covered by their individual manufacturer warranties. PHOTOMETRY 4' Luminaire with Kicker Very High Output Efficacy: 92 lumens per watt Total luminaire output: 1816 lumens (454 lumens/foot) 21.5 watts (5.4 watts/foot) Peak Candela Value: 35º CCT: 3500K ITL LM79 Report: CANDELA DISTRIBUTION Flux W W W. F I N E L I T E. C O M Protected by one or more US Patents: ; D702,391; D702,390; D700,732

40 HP-4 WW AM Dimensions Wall Wash Arm Mount 1" 11", 17", or 23" 5" 1-15/16" 12", 18", or 2 Arm Length 3/8" Specifications CONSTRUCTION: Precision-cut 6063-T6 extruded aluminum body. Internal joiner system, plug-together wiring, standard. ENDCAPS: Flat diecast aluminum endcaps add 1/ to each end of luminaire. REFLECTORS: 94% reflective semi-specular reflector (94SS) provides reflectivity and glare control. The standard kicker (K) reflector delivers light high on the vertical surface. The kicker reflector is easily removed for open distribution (FO). DIFFUSER: Luminaires are standard with frosted diffusers. All diffusers are UVstabilized and impact resistant virgin acrylic. Frosted diffusers are 1/16" thick. 12-foot maximum diffuser length. LIGHT OUTPUT: Four lumen packages available, Standard (S), Boosted Standard (B), High (H), and Very High (V). A separate chart summarizes lumen distribution and wattage. Light engines are replaceable. LUMEN MAINTENANCE: 90% of initial light output (L90) at 100,000+ hours; 70% of initial light output (L70) at 200,000+ hours. ELECTRICAL: Optional emergency to generator/inverter wiring, internal generator transfer switch, nightlight wiring, step-dimming driver, backup battery. Factory-choice low-profile backup battery available. 8' minimum luminaire length for low profile battery pack. Bodine BSL722 battery pack also available; 4' minimum luminaire length. Backup battery delivers 1400 lumens. One 4' section will be illuminated in emergency mode. MOUNTING: Arm Mounted (AM) bracket mounts directly to wall j-box, extends luminaire 12", 18", or 2 from wall. Other lengths available. Consult factory. FINISHES: Finelite Signal White powder coat standard. Optional Adders: 185 non-metallic RAL colors. FEED: Standard with one 18-gauge/5-conductor single-circuit feed. 14-gauge feed used when luminaire current exceeds 5 amps. Optional 6' flex conduit whips available. LENGTHS: Any length, 2-foot minimum, in increments down to 1/16th-inch (± 1/32"). 12-foot maximum section length. See run length and mounting location examples on next page. ARM MOUNT SPACING: 12-foot maximum spacing. All luminaire joints require two arm mounts. WEIGHT: 2.9 lb/ft. (Luminaire only). WARRANTY: 10-year performance-based warranty on all standard components. Optional accessories such as emergency battery packs are covered by their individual manufacturer warranties. PHOTOMETRY HP-4 WW-AM-K-B-835 Very High Output - 4' Luminaire with Kicker Efficacy: 92 lumens per watt Total luminaire output: 1816 lumens (454 lumens/foot) 21.5 watts (5.4 watts/foot) Peak Candela Value: 35º CCT: 3500K; 80 CRI ITL LM79 Report: CANDELA DISTRIBUTION Flux continued... W W W. F I N E L I T E. C O M 77

41 HP-4 WW AM RUN LENGTHS & MOUNTING LOCATION EXAMPLES Tailored Lengths Available Down To 1/16" (±1/32") 2' 2 6" 6" 4' 6" 48" 6" 8' 96" 6" 6" 12'* 14 6" 6" 16' 96" 96" 6" 6" 6" 6" = Bracket Location * = 12' Maximum spacing for two arm mount supports Endcaps Information The Flat Endcap adds 1/ per endcap to the section length. Endcap 1/ *Contact factory for switching options. 78 W W W. F I N E L I T E. C O M

42 High Performance Aperture LED Collection Project: Square Trade Global Headquarters Location: San Francisco, CA Architect: Blitz Product: HP-4 ID Representative: Associated Lighting Representatives Ordering Guide HP-4 ID - 32' - S - H K - TG - F - 120V - SC - FA - C1 - OBO Finelite Series HP-4 (ID - Indirect/Direct, D - Direct, I - Indirect, SM - Surface Mount, R - Recessed, RG - Recessed with Regressed Diffuser 1 ) Finelite Series HP-4 WM (ID - Indirect/Direct, D - Direct, I - Indirect) Finelite Series HP-4 WW (D - Direct, R - Recessed, SM - Surface Mount, AM - Arm Mounted) Length (Minimum 2', increments accurate to 1/16" (±1/32", standard) Uplight Output (S - Standard, B - Boosted Standard, H - High, V - Very High) Downlight Output (S - Standard, B - Boosted Standard, H - High, V - Very High) LED CRI/CCT ( CRI min, 3000K; CRI min, 3000K; CRI min, 3500K; CRI min, 3500K; CRI min, 4000K; CRI min, 4000K) Reflector (K - Kicker (standard), FO - Fully Open) 2 Uplight Option (TG - Top Glow (standard), F - Flush, WSO - Wide Spread Optic, WSOTG - Widespread Optic with TopGlow 3 ) 4 Downlight Option (F - Flush (standard), BG - Bottom Glow) 5 Voltage (120V, 277V) Circuiting (SC - Single Circuit, DC - Dual Circuit 6 ) 7 Mounting (FA - Fully Adjustable, FM - Flexible Mounting 8, MB - Mounting Bracket 9 ) Mounting Arm Length 10 (AM12-12", AM24-2) Ceiling Type (C1-1" T-Bar, C2-9/16" T-Bar, C3 - screw slot, C3F - flush screw slot, C4 - hard ceiling 11, VF - Visible Flange, C1T - 1" Tegular, C2T - 9/16" tegular, SF - Spackle Flange, TZ6 (C1, C2, C2T, C3, C3T, C3F) - Tech Zone 6") Integrated Sensor (OBO - Occupancy Sensor, OBD - daylight) 12 1 Regressed diffuser housing is 5 in. deep 5 Applies to D, ID, and SM only 9 Available on HP-4 WM only 2 Available on WW Only 6 Dual Circuit for Indirect/Direct only 10 Wall Wash Arm Mounted only 3 Contact factory for WSO with Top Glow 7 Contact factory for switching options 11 Available on HP-4 SM only 4 Applies to ID & I only 8 Available on HP-4 D only 12 Not available for WW W W W. F I N E L I T E. C O M 79

43 High Performance 6" Aperture LED Collection This architectural LED collection delivers uniform and continuous illumination with a clean 6-inch-wide linear aesthetic. Now with Tailored Lighting and Tunable White options, the design flexibility of these lines of light makes what's custom for some manufacturers, standard for Finelite. This affordable collection is just one in Finelite's portfolio of energy efficient, sustainably and domestically manufactured LED luminaires. 10 Industry Best Year LED Warranty 80 W W W. F I N E L I T E. C O M

44 HP-6 Features Tailored Output Optimize lighting levels to accommodate architectural design elements and code requirements. Tailored Control Dim and tune the lighting to fit user preference. Apply sensors to respond to the environment. Performance Delivering up to 105 lumens per watt. On-Grid Mounting On-Grid mounting for luminaires in standard lengths makes installation quick and easy. Tailored Length Enhance architectural interiors with perfectly sized luminaires. Tailored Angles Lines of light conform to the architecture with precision mitered angles. Tailored Color Tune white light and intensity to the preference of the people in the space. Family of Products Pendant Indirect/Direct Pendant Pendant Surface Wall Regressed Direct Recessed Surface Mount Direct Indirect Mount Wash Diffuser W W W. F I N E L I T E. C O M 81

45 HP-6 D Dimensions Flexible Mounting Seamless Illumination 5-5/16" Specifications CONSTRUCTION: Precision-cut 6061-T6 extruded aluminum body. Internal joiner system, plug-together wiring, standard. ENDCAPS: Flat diecast aluminum endcaps add 1/ to each end of luminaire. MITERED CORNER: Fully illuminated 90 corners have internal secondary diffusers to ensure against light leaks. Custom angles are available (90 minimum on inside corners.) Contact factory. REFLECTORS: Die-formed 24-gauge cold-rolled steel reflectors finished in 96LG High Reflectance white powder coat paint. DOWNLIGHT DIFFUSER: 12' maximum diffuser length. Internal secondary diffusers at corners ensure visually seamless, uniform, continuous illumination. Frost white snap-in diffuser, 73% transmissive, 99% diffusion. LIGHT OUTPUT: Four lumen packages available, Standard (S), Boosted Standard (B), High (H), and Very High (V). A separate chart summarizes lumen distribution and wattage. Light engines are replaceable. ELECTRICAL: Optional emergency to generator/inverter wiring, internal generator transfer switch, nightlight wiring, step-dimming driver, backup battery. Factory choice low-profile backup battery available. 8' minimum luminaire length for low profile battery pack. Bodine BSL722 battery pack also available; 4' minimum luminaire length. Backup batteries deliver 1300 lumens. Half of a 4' section will be illuminated in emergency mode. INTEGRATED SENSORS: Integrated PIR (Passive Infrared) occupancy and/or daylight sensors available. Refer to Occupancy Sensor and Daylight Sensor tech sheets for more info. MOUNTING: 50" Fully Adjustable (FA) plated steel aircraft cable with safety stop hardware standard. Contact factory for additional lengths up to 150". The Flexible Mounting Bracket (FM) adjusts the suspension points to accommodate existing architecture. Suspension points adjust up to 2' in from the end of 8' or 12' luminaire lengths and up to 1' in on shorter lengths. FINISHES: Finelite Signal White powder coat standard. Optional Adders: 185 non-metallic RAL colors. FEED: Standard with one 18-gauge/5-conductor single-circuit feed. 14-gauge feed used when luminaire current exceeds 5 amps. LENGTHS: Any length, 2-foot minimum, in increments down to 1/16th-inch (± 1/32"). 12-foot maximum section length. WEIGHT: 3.6 lb/ft. WARRANTY: 10-year performance-based warranty on all standard components. Optional accessories such as emergency battery packs are covered by their individual manufacturer warranties. PHOTOMETRY 4' Luminaire Very High Output Efficacy: 100 lumens per watt Total luminaire output: 3769 lumens (942 lumens/foot) 37.6 watts (9.4 watts/foot) Peak Candela Value: 0º CRI: 84 R9: 17 CCT: 3500K ITL LM79 Report: CANDELA DISTRIBUTION Flux W W W. F I N E L I T E. C O M Protected by one or more US Patents: ; D702,391; D702,390; D700,732; D727,554 S; D727,550 S, D727,551 S

46 HP-6 R Dimensions Seamless Illumination Mitered Angles 90 Wall to Ceiling 5-5/16" 5-5/16" Air Return 1 (Contact factory for availability.) = air flow through the luminaire. Specifications CONSTRUCTION: Precision-cut 6061-T6 extruded aluminum body. Internal joiner system, plug-together wiring, standard. Housing is powder coated. ENDCAPS: Flat endcaps add 1/16" to each end of luminaire. MITERED CORNER: Fully illuminated 90 corners have double-diffusers to ensure against light leaks. Custom angles are available (90 minimum on inside corners). Contact Factory. REFLECTORS: Die-formed 24-gauge cold-rolled steel reflectors are finished in 96 LG high reflectance matte white powder coat paint. DOWNLIGHT DIFFUSER: 12' maximum diffuser length. Internal secondary diffusers at corners, joints and seams ensure visually seamless, uniform, continuous illumination. Flush frost white snap-in diffuser, 73% transmissive, 99% diffusion. LIGHT OUTPUT: Four lumen packages available, Standard (S), Boosted Standard (B), High (H), and Very High (V). A separate chart summarizes lumen distribution and wattage. Light engines are replaceable. ELECTRICAL: Optional emergency to generator/inverter wiring, internal generator transfer switch (not IC-rated), nightlight wiring, step-dimming driver, backup battery. Factory choice low-profile backup battery available. 8' minimum luminaire length for low profile battery pack. Bodine BSL722 battery pack also available; 4' minimum luminaire length. Backup batteries deliver 1300 lumens. Half of a 4' section will be illuminated in emergency mode. INTEGRATED SENSORS: Integrated PIR (Passive Infrared) occupancy and/or daylight sensors available. Refer to Occupancy Sensor and Daylight Sensor tech sheets for more info. MOUNTING: Standard bracket design works with most lay-in ceiling types. Brackets secure luminaire to the ceiling grid from above. Tie-in T-Bar brackets connect the luminaire to the T-Bar for securing to structure. Consult local codes for tie-wire recommendations. AIR RETURN: Luminaire tested in accordance with ADC1062 and ASHRAE 70. Air Return slots positioned along outside edge of luminaire. Contact factory for availably. FEED: Standard with one 18-gauge/5-conductor single-circuit feed. 14-gauge feed used when luminaire current exceeds 5 amps. Optional 6 ft. flex conduit whips available. - LENGTHS: Any length, 2-foot minimum, in increments down to 1/16th-inch (± 1/32"). 12-foot maximum section length. WEIGHT: 3.7 lb/ft. WARRANTY: 10-year performance-based warranty on all standard components. Optional accessories such as emergency battery packs are covered by their individual manufacturer warranties. PHOTOMETRY 4 ft. Luminaire Very High Output Efficacy: 100 lumens per watt Total luminaire output: 3769 lumens (942 lumens/foot) 38.4 watts (9.6 watts/foot) Peak Candela Value: 0º CRI: 84 R9: 17 CCT: 3500K ITL LM79 Report: CANDELA DISTRIBUTION Flux Air Return not available on VF - Visible Flange, SF - Spackle Flange or Tech Zone 6" Protected by one or more US Patents: ; D702,391; D702,390; D700,732; D727,554 S; D727,550 S, D727,551 S W W W. F I N E L I T E. C O M 83

47 HP-6 SM Dimensions Ceiling Surface Mount Horizontal Surface Mount Vertical Surface Mount 5-5/16" Specifications CONSTRUCTION: Precision-cut 6061-T6 extruded aluminum body. Internal joiner system, plug-together wiring, standard. ENDCAPS: Flat diecast aluminum endcaps add 1/ to each end of luminaire. MITERED CORNER: Fully illuminated 90 corners in a single plane, with Flush diffuser, standard. Custom angles are available (90 minimum on inside corners). Contact factory. REFLECTORS: Die-formed 24-gauge cold-rolled steel reflectors finished in 96LG High Reflectance white powder coat paint. DOWNLIGHT DIFFUSER: 12' maximum diffuser length. Internal secondary diffusers at corners, joints and seams ensure visually seamless, uniform, continuous illumination. Flush frost white snap-in diffuser, 73% transmissive, 99% diffusion. LIGHT OUTPUT: Four lumen packages available, Standard (S), Boosted Standard (B), High (H), and Very High (V). A separate chart summarizes lumen distribution and wattage. Light engines are replaceable. ELECTRICAL: Optional emergency to generator/inverter wiring, internal generator transfer switch, nightlight wiring, step-dimming driver, backup battery. Chicago Plenum Option. Factory-choice low-profile backup battery available. 8' minimum luminaire length for low profile battery pack. Bodine BSL722 battery pack also available; 4' minimum luminaire length. Backup batteries deliver 1300 lumens. Half of a 4' section will be illuminated in emergency mode. INTEGRATED SENSORS: Integrated PIR (Passive Infrared) occupancy and/or daylight sensors available. Refer to Occupancy Sensor and Daylight Sensor tech sheets for more info. MOUNTING: Lay-in ceiling types: caddy clip with 1/ - 20 stud and nut. Drywall or concrete surfaces (walls or ceilings): 1/ - 20 stud and nut (provided by others). FINISHES: Finelite Signal White powder coat standard. Optional Adders: 185 non-metallic RAL colors. FEED: Standard with one 18-gauge/5-conductor single-circuit feed. 14-gauge feed used when luminaire current exceeds 5 amps. Optional 6' flex conduit whips available. LENGTHS: Any length, 2-foot minimum, in increments down to 1/16th-inch (± 1/32"). 12-foot maximum section length. WEIGHT: 3.6 lb/ft. WARRANTY: 10-year performance-based warranty on all standard components. Optional accessories such as emergency battery packs are covered by their individual manufacturer warranties. PHOTOMETRY 4' Luminaire Very High Output Efficacy: 100 lumens per watt Total luminaire output: 3769 lumens (942 lumens/foot) 38.4 watts (9.6 watts/foot) Peak Candela Value: 0º CRI: 84 R9: 17 CCT: 3500K ITL LM79 Report: CANDELA DISTRIBUTION Flux W W W. F I N E L I T E. C O M Protected by one or more US Patents: ; D702,391; D702,390; D700,732; D727,554 S; D727,550 S, D727,551 S

48 High Performance 6" Aperture LED Collection Ordering Guide HP-6 D - 32' - S F - 120V - SC - FM - C1 - OBO - AR Finelite HP-6 (D - Direct, R - Recessed, SM - Surface Mount) Length (Minimum 2', increments accurate to 1/16th" (±1/32"), standard) Light Output (S - Standard, B - Boosted Standard, H - High, V - Very High) LED CRI/CCT ( CRI min, 3000K; CRI min, 3500K; CRI min, 4000K; CRI min, 3000K; CRI min, 3500K; CRI min, 4000K) Downlight Diffuser (F - Flush) Voltage (120V, 277V) Circuiting (SC - Single Circuit) 2 Mounting 3 (FA - Fully Adjustable, FM - Flexible Mounting) Ceiling Type (C1-1" T-Bar, C2-9/16" T-Bar, C3 - screw slot, C3F - flush screw slot, C4 - hard ceiling 1, VF - Visible Flange, C1T - 1" Tegular, C2T - 9/16" Tegular, SF - Spackle Flange, TZ6 (C2, C2T, C3, C3F) - tech zone 6") Integrated Sensor (OBO - Occupancy Sensor, OBD - daylight) Air Return 4 (AR) 1 Available on HP-6 D & SM only 2 Contact factory for switching options 3 Available on HP-6 D only 4 Air Return not available on VF - Visible Flange, SF - Spackle Flange or Tech Zone 6" Note: For Tunable White please see Tunable White technical sheet. W W W. F I N E L I T E. C O M 85

49 Elements of Design Minimalist LED Architectural Profiles 10 Industry Best Year LED Warranty 86 W W W. F I N E L I T E. C O M

50 E2 Indirect/Direct Linear E2 Indirect/Direct Configuration E1 Indirect Linear E1 Indirect Configuration W W W. F I N E L I T E. C O M 87

51 E2-Indirect/Direct Configuration & Linear Feature Spotlight Dimensions Top Glow (Standard) 1/8" Flush 2-1/ 2-1/ 1-1/8" Specifications 1-1/8" CONSTRUCTION: Precision cut 6063-T6 extruded aluminum body with mitered corners. Top Glow diffuser snaps into place and is easily removed for service. UPLIGHT DIFFUSER: The Top Glow diffuser is frost white standard. Coupled with light engine design, the diffuser spreads the light evenly for enhanced ceiling uniformity. Optional: Flush frost white snap-in diffuser, 94% transmissive, 10% diffusion. DOWNLIGHT DIFFUSER: The downlight diffuser is frost white standard. Coupled with light engine design, the diffuser spreads the light evenly for enhanced distribution. LIGHT OUTPUT: Four lumen packages available, Standard (S), Boosted Standard (B), High (H), and Very High (V). A separate chart summarizes lumen distribution and wattage. Light engines are replaceable. LUMEN MAINTENANCE: 90% of initial light output (L90) at 100,000+ hours; 70% of initial light output (L70) at 200,000+ hours. ELECTRICAL: 120V or 277V prewired. Emergency to generator/inverter wiring, internal generator transfer switch. See electrical box options for more information (page 63). Configuration Linear MOUNTING: Standard E2-ID Linear mounting is off-grid. Bar Hangers for mounting power supply boxes to joists are ordered separately. FINISH: Finelite Signal White powder coat finish standard. Optional adders: 185 colors available using RAL color chart. SUPPORT CABLES/FEED: Standard suspension is conductive feed/suspension cable. The adjustable power cable (APC) comes standard in 50" length. 4-conductor cable standard delivering independent uplight and downlight control. 5-conductor cables when using battery backup. Field adjustable length. Max support spacing every 8' for linear. STANDARD CONFIGURATIONS: Linear - Any length, 2-foot minimum, in increments down to 1/16" (± 1/32"). 8-foot maximum section length. Configuration - Available in 2x2, 2x3, 2x4, 3x3, 3x4, and 4x4 sizes. WEIGHT: 1.0 lb per foot. 4' E2-ID linear weighs 4 lbs. WARRANTY: 10-year performance-based warranty on all standard components. Optional accessories such as emergency battery packs are covered by their individual manufacturer warranties. PHOTOMETRY - Flush / Flush Diffuser (E2-ID-L-4'-V-V-835-F-F) Very High Output - 4' Luminaire Efficacy: 99 lumens per watt Total luminaire output: 3690 lumens / 37.2 watts CCT: 3500K; CRI: 80 ITL LM79 Report CANDELA DISTRIBUTION Flux W W W. F I N E L I T E. C O M

52 Electrical Box Options (For more details, refer to tech sheet.) E2 can be specified with power supply boxes to meet specific application needs. From new to retrofit, T-Bar to drywall, to fully remote, E2 power supply aboxes install quickly and easily. E2-Indirect Low Profile T-Bar Power Supply Box (P01) Large Capacity Power Supply Box (P02) Retrofit Angled Power Supply Box (P03) Splice Box (S01) Standard Configuration Dimensions 2'x2' 2'x3' 2'x4' 3'x3' 3'x4' 4'x4' Ordering Guide E2-ID - L - 4' - H - H TG - F - 96LG - 120V - SC - APC - FE - C1 - OBO Finelite E2 (ID - Indirect/Direct) Luminaire Styles (L - Linear, C - Configuration) Lengths (Minimum 2', increments accurate to 1/16" (±1/32") Uplight Output (S - Standard, B - Boosted Standard, H - High, V - Very High) Downlight Output (S - Standard, B - Boosted Standard, H - High, V - Very High) LED CRI/CCT ( CRI min, 3000K CRI min, 3000K CRI min, 3500K CRI min, 3500K CRI min, 4000K CRI min, 4000K) Upllight Diffuser Option (TG - Top Glow (standard), F - Flush) Downlight Diffuser Option (F - Flush (standard)) Reflector System (96LG - Low Gloss) Voltage (120V, 277V) Circuiting (SC - Single Circuit, MC - Multi-Circuit) Mounting (APC - Ajustable Power Cable) Endcap (FE - Flat Endcap) Ceiling Type (C1-1" T-Bar, C2-9/16" T-Bar, C3 - Screw Slot, C4 - Hard Ceiling) Integrated Sensor* (OBO - Occupancy Sensor) *Sensor is integrated into the canopy above the luminaire. W W W. F I N E L I T E. C O M 89

53 E1-Indirect Configuration & Linear Feature Spotlight Dimensions 1/8" 5/8" Configuration Linear 1-1/ Specifications Conductive Cable Top Glow Diffuser CONSTRUCTION: Precision cut 6061-T6 extruded aluminum body with mitered corners. Top Glow diffuser snaps into place and is easily removed for service. UPLIGHT DIFFUSER: The Top Glow diffuser is frost white standard, 89% transmissive, 99% diffusion. Coupled with light engine design, the diffuser spreads the light evenly for enhanced ceiling uniformity. LIGHT OUTPUT: Four lumen packages available, Standard (S), Boosted Standard (B), High (H), and Very High (V). A separate chart summarizes lumen distribution and wattage. Light engines are replaceable. LUMEN MAINTENANCE: 90% of initial light output (L90) at 100,000+ hours; 70% of initial light output (L70) at 200,000+ hours. ELECTRICAL: 120V or 277V prewired. Emergency to generator/ inverter wiring, internal generator transfer switch, nightlight wiring. Please note: Battery backup not available. MOUNTING: Mounting hardware supplied by Finelite includes 1/ x 20 hardware. Retention arm (bar hanger) for connection to ceiling grid or joists is by others. LED drivers are 100% accessible from below ceiling by simply lowering canopy. FINISH: Finelite Signal White powder coat finish standard. Optional adders: 185 colors available using RAL color chart. SUPPORT CABLES/FEED: Linear: (FA) 50" fully adjustable aircraft cable standard with a safety stop. Micro 2-wire feed power cable. Contact factory for additional lengths up to 150". Power feed required for every 8'.Conductive feed/suspension cable standard. Standard suspension for 1'x1', 1'x2', 1'x3', 1'x4', and 2'x2' configurations is 18" from canopy to top of luminaire. Standard suspension for 2'x3', 2'x4', 3'x3', 3'x4', and 4'x4' configurations is 2. Contact factory for additional lengths. LENGTH CONFIGURATION: Configuration available in 1'x1', 1'x2', 1'x3', 1'x4', 2'x2', 2'x3', 2'x4', 3'x3', 3'x4', and 4'x4' sizes. Linear standard 2', 3', and 4' section lengths can be combined to make longer runs. Contact factory for other lengths. 8 ft. length requires three suspension points. Runs require a suspension point every 4'. WEIGHT: 2'x2' E1-I weighs 6 lbs (including power supply). WARRANTY: E1-I comes standard with a 10-year performance-based warranty on all components. PHOTOMETRY E1-I-C-4'-V-835-TG Very High Output - 2' x 2' Efficacy (lumens per watt): Total luminaire output: 4642 lumens / 37.3 watts CCT: 3500K; CRI: 80 ITL LM79 Report E1-I-L-4'-V-835-TG Very High Output - 4' Luminaire Efficacy (lumens per watt): 114 Total luminaire Output: 2251 lumens (563 lumens/foot) 19.7 watts (4.9 watts/ foot) CCT: 3500K; CRI: 80 ITL LM79 Report CANDELA DISTRIBUTION Flux CANDELA DISTRIBUTION Flux W W W. F I N E L I T E. C O M

54 Standard Configuration Dimensions E1-Indirect 1'x1' 1'x2' 1'x3' 1'x4' 2'x2' 2'x3' 2'x4' 3'x3' 3'x4' 4'x4' Linear Lengths Standard 2', 3', and 4' section lengths can be combined to make longer runs. Contact factory for other lengths. 8' length requires three suspension points. Runs require a suspension point every 4'. 2' 3' 4' 8' = Power Feed = Suspension 16' or longer runs Project: Brown Brothers Harriman Location: Philadelphia, PA Architect: C. Erickson & Sons Product: E1- I Configuration 3x3 Representative: Diversified Lighting Associates Ordering Guide E1-I - C - 4' - 2'x2' - S TG - 120V - SC - FA - FE - C1 Finelite E1 (I - Indirect) Luminaire Style (L - Linear, C - Configuration) Lengths (2', 3', 4', and 8' 1, multiples standard) Configuration Dimensions (1'x1', 1'x2', 1'x3',1'x4', 2'x2', 2'x3', 2'x4', 3'x3', 3'x4', 4'x4') Uplight Output (S - Standard, B - Boosted Standard, H - High, V - Very High) LED CRI/CCT ( CRI min, 3000K CRI min, 3000K CRI min, 3500K CRI min, 3500K CRI min, 4000K CRI min, 4000K) Uplight Diffuser Option (TG - Top Glow (standard)) Voltage (120V, 277V) Circuiting (SC - Single Circuit, MC - Multi-Circuit 2 ) Mounting (FA - Fully Adjustable) Endcap (FE - Flat Endcap) Ceiling Type (C1-1" T-Bar, C2-9/16" T-Bar, C3 - Screw Slot, C4 - Hard Ceiling) W W W. F I N E L I T E. C O M 91

55 Perimeter Lighting Perimeter Slot (hp-ws) & Wall Grazer (hp-wg) The High Performance Perimeter Slot (HP-WS) is a luminaire that creates a wash of light for ambient and vertical illumination at the transition between the wall and the ceiling plane. Accommodates straight runs and corner applications. Unique post ceiling installation eliminates the need to install mounting hardware prior the completion of the slot framing improving the installation process. The High Performance Wall Grazer (HP-WG) is a perimeter luminaire that creates a uniform grazing distribution of light down the vertical surface of a wall. The light separates the wall and the ceiling plane and accentuates relief and patterns of textured vertical surfaces. 10 Industry Best Year LED Warranty 92 W W W. F I N E L I T E. C O M

56 HP-WS Features Installation An installation method optimized for simplicity, speed and longevity. The luminaire installs after the ceiling framing is complete. Post-ceiling threaded rod system allows projects to complete on schedule and on time. Tailored Output Optimizing lighting levels to accommodate architectural design elements and code requirements. Tailored Control Dim and tune the lighting to fit user preference. Tailored Color Tune white light and intensity to the preferences of the people in the space. Adjustable Optional telescoping section ensures an accurate fit with uniform illumination. Performance Delivers up to 774 lumens per foot and Corners Accommodates inside and outside 90 corners. Tapered Optic Award winning uniform illumination through a corner and at the end of a run ensure a consistent lighting level and beautiful design. hp-ws Perimeter Wall Slot Cross Sections W x 2"D W x D W x 6"D 4-1/2" Rough in 4-1/2" Rough in 4-1/2" Rough in 5" Diffuser Wall Sheetrock 2" Diffuser Wall Sheetrock 7" Diffuser Wall 6" 9" Wall Bracket (WB) Mounting Available Sheetrock 6"W x 2"D 6"W x D 6"W x 6"D 6-1/2" Rough in 6-1/2" Rough in 6-1/2" Rough in 6" 6" 6" 5" Wall Diffuser Sheetrock 2" Wall Diffuser Sheetrock 7" Wall Diffuser 6" 9" Sheetrock W W W. F I N E L I T E. C O M 93

57 HP-WS Perimeter Slot Dimensions and Light Engine Feature Spotlight Distribution is attained with mid-power LEDs distributed evenly and paired with a precise regressed diffuser. Wall Bracket (WB) Mounting Available A Optic Width (, 6") 1/-20 Threaded Rod (by others) Standard Wall-to-Wall Endcap (FE-L or FE-R) Pocket Slot Endcap (PE-L or PE-R) Regressed Optic Depth (2",, 6") Diffuser B Wall Sheetrock Telescoping (TXL-L or TXL-R) Tapered Optic w/ 90 Inside Corner (TP) Specifications CONSTRUCTION: Precision cut 6061-T6 extruded aluminum visible flange. Internal joiner system, plug-together wiring standard. Steel sheet metal galvanized and power coated body. ENDCAPS: The luminaire can terminate in three different end conditions to accommodate project needs. Endcaps are made of 20-guage die-formed powder-coated steel. Wall-to-Wall (standard) Endcap adds 1/8", Pocket Slot Endcap adds 1-1/, and for Telescoping Endcap refer to telescoping section below. END CONDITIONS: FLAT (standard) (FE-L or FE-R): Is used when the luminaire terminates at a wall. Adds 1/8 per endcap to overall length of the luminaire. POCKET SLOT (PE-L or PE-R): Includes the necessary hardware to accommodate ceiling materials when the luminaire doesn t terminate at a wall. Adds 1-1/ for Spackle Flange and 1" for T-Bar per endcap to overall length of the luminaire. TELESCOPING (TXL-L or TXL-R): Provides up to 12" of additional illuminated section to accommodate variances in the built-in wall slot. Telescoping available on both ends of 4' and 8' luminaire sections. Adds a minimum of 1" per end to overall section length. Telescoping only available at one end of 2' and 3'. luminaire sections. Adds a minimum of 2" to overall length of 2' sections and a minimum of 1" to overall length of 3' sections. Telescoping is standard with corners. Telescoping section must end at wall and be secured with bracket (provided). 90 CORNER: Illuminated 90 inside and outside corners. Standard with telescoping sections. Tapered optics is standard with inside corners. LIGHT OUTPUT: Four lumen packages available; Standard (S), Boosted Standard (B), High (H), and Very High (V). A separate chart summarizes lumen distribution and wattage. Light engines are replaceable. ELECTRICAL: Optional emergency to generator/inverter wiring, internal generator transfer switch, nightlight wiring, backup battery. Factory-choice lowprofile backup battery available. 8 ft. minimum luminaire length for low profile battery pack. Backup batteries deliver 1000 lumens. Half of a 4 ft. section will be illuminated in emergency mode. Optional fusing is available. Chicago Plenum Option available (Includes telescoping luminaires). MOUNTING: The standard mounting (Threaded Rod - TR) option eliminates the need to install luminaires prior to the slot being framed. Luminaire mounts on threaded rods. Gasket runs length of luminaire ensuring a clean finish at the wall. Optional mounting includes a wall bracket that is attached to the wall. Luminaires are then snapped onto the bracket. Luminaire installation that uses the mounting bracket must be performed before the perimeter slot framing is built. FEED: Standard with one 18-gauge/5-conductor single-circuit feed. 14-gauge feed used when luminaire current exceeds 5 amps. Optional 6 ft. flex conduit whips available. Dual knockouts (for dual flex conduit) are available at the top and rear feed locations. Endcaps have a single knockout and support a single flex conduit only. LENGTHS: Standard 2', 3', 4', and 8' section lengths can be combined to make longer runs. Optional telescoping sections on stright runs add a minimum of 1" up to 12" at the end of the luminaire. Contact factory for corner details and availability. Telescoping sections are available on either or both ends of the luminaire. WEIGHT: 5.6 lb./ft. WARRANTY: 10-year performance-based warranty on all standard components. Optional accessories such as emergency battery packs are covered by their individual manufacturer warranties. PHOTOMETRY 4' Luminaire W x 2"D Very High Output - 120V Efficacy: 84 lumens per watt Total Luminaire Output: 3097 lumens (774 lumens/foot) 37 watts (9.3 watts/foot) CCT: 3500K ITL LM79 Report: CANDELA DISTRIBUTION Flux W W W. F I N E L I T E. C O M

58 HP-WS Perimeter Wall Slot 1/-20 Threaded Rod (by others) THREADED ROD (TR) MOUNTING INSTALLATION Eliminates the need to install mounting hardware prior the completion of the slot framing. Inside 90 Telescoping Corner Joints Outside 90 FULLY ILLUMINATED 90 CORNERS Fully illuminated 90 corners with telescoping standard. Wall Luminaire STRAIGHT RUNS WITH OPTIONAL TELESCOPING Optional telescoping section adds up to 12 inches for a straight run. Telescope section mounts securely to wall. Ordering Guide Telescoping Optional: TXL-L or TXL-R HP-WS - 4W - 4D - 8' - S V - SC - TR - SW - FE-L - TXL-R - C1 Finelite HP-WS Optic Width (4W - Width, 6W - 6" Width) Regressed Optic Depth (2D - 2" Depth, 4D - Depth, 6D - 6" Depth) Length (2', 3', 4', 8', multiples standard) Light Output (S - Standard, B - Boosted Standard, H - High, V - Very High) LED CRI/CCT ( CRI min, 3000K; CRI min, 3000K; CRI min, 3500K; CRI min, 3500K; CRI min, 4000K; CRI min, 4000K) Voltage (120V, 277V) Circuiting (SC - Single Circuit) 1 Mounting (TR - Threaded Rod 2 (standard), WB - Wall Bracket 3 ) Reflector (SW - Signal White) End Condition Left (FE-L - Wall-to-Wall (standard), PE-L - Pocket Slot, TXL-L - Telescoping) 4 End Condition Right (FE-R - Wall-to-Wall (standard), PE-R - Pocket Slot, TXL-R - Telescoping) 4 Ceiling Type (C1-1" T-Bar, C2-9/16" T-Bar, C3 - screw slot, SF - Spackle Flange) 1 Contact factory for switching options. 2 Pre- or post-ceiling. 3 Pre-ceiling only. 4 The end condition on each side can be specified with different hardware options to accommodate different installation features. See page 3 in tech sheet for more information. Note: For Tunable White, please see Tunable White tech sheet. W W W. F I N E L I T E. C O M 95

59 HP-WG Features Tailored Output Optimizing lighting levels to accommodate architectural design elements and code requirements. Tailored Control Dim and tune the lighting to fit user preference. Tailored Color Tune white light and intensity to the preferences of the people in the space. Installation An installation method optimized for simplicity, speed and longevity. The luminaire installs after the ceiling framing is complete. Post-ceiling threaded rod system allows projects to complete on schedule and on time. Performance Delivers up to 645 lumens per foot. Tailored Lengths* Minimum 2', increments accurate to 1/16". hp-wg Perimeter Wall Grazer Cross Sections 6"W x 2"D 6"W x D 6"W x 6"D 6-1/2" 5-1/2" Rough in 6-1/2" 5-1/2" Rough in 6-1/2" 5-1/2" Rough in 1/-20 Threaded Rod 1/-20 Threaded Rod 1/-20 Threaded Rod Diffuser 1/2" Wall Sheetrock 2" 5" Diffuser 1/2" Wall 7" Diffuser 1/2" Wall 6" 9" Sheetrock Sheetrock 96 W W W. F I N E L I T E. C O M

60 HP-WG Wall Grazer Dimensions Endcap Options 5-1/2" 1/-20 Threaded Rod 6" Diffuser Kicker 1/2" Diffuser Kicker Wall Sheetrock A Wall Sheetrock A DIMENSIONS & LIGHT ENGINE The grazing distribution is attained with mid-power LEDs distributed evenly and paired with a precise regressed diffuser. Pocket Slot Endcap (PE-L or PE-R) Standard Flat Endcap (FE-L or FE-R) Specifications CONSTRUCTION: Precision cut 6061-T6 extruded aluminum visible flange and reflector carrier. Internal joiner system, plug-together wiring standard. Steel sheet metal galvanized and powder coated body. ENDCAPS: The luminaire can terminate in two different end conditions to accommodate project needs. Endcaps are made of 20-guage die-formed powdercoated steel. END CONDITIONS: FLAT (standard) (FE-L or FE-R): Is used to mount to a wall. Adds 1/8" per endcap to overall length of the luminaire. POCKET SLOT (PE-L or PE-R): Includes the necessary hardware to accommodate ceiling materials when the luminaire doesn t terminate at a wall. Adds 1-1/ for Spackle Flange and 1" for T-Bar per endcap to overall length of the luminaire. LIGHT OUTPUT: Four lumen packages available; Standard (S), Boosted Standard (B), High (H), and Very High (V). A separate chart summarizes lumen distribution and wattage. Light engines are replaceable. ELECTRICAL: Optional emergency to generator/inverter wiring, internal generator transfer switch, nightlight wiring, backup battery. Factory-choice lowprofile backup battery available. 8 ft. minimum fixture length for low profile battery pack. Backup batteries deliver 1289 lumens. Half of a 4 ft. section will be illuminated in emergency mode. Optional fusing is available. Chicago Plenum Option available. MOUNTING: The standard mounting (Threaded Rod - TR) option eliminates the need to install luminaires prior to the slot being framed. Luminaire mounts on threaded rods. Optional Mounting Bracket installation includes wall bracket that is attached to the wall. Luminaires are then snapped onto bracket. Luminaire installation that uses the mounting bracket must be performed before the perimeter slot framing is built. FEED: Standard with one 18-gauge/5-conductor single-circuit feed. 14- gauge feed used when fixture current exceeds 5 amps. Optional 6 ft. flex conduit whips available. Dual knockouts (for dual flex conduit) are available at the top and rear feed locations. Endcaps have a single knockout and support a single flex conduit only. LENGTHS: Any length, 2-foot minimum, in increments down to 1/16" (± 1/32"). 8-foot maximum section length. WEIGHT: Threaded-rod luminaire 4.5 lb/ft., Wall Bracket luminaire 5 lb/ft. WARRANTY: 10-year performance-based warranty on all standard components. Optional accessories such as emergency battery packs are covered by their individual manufacturer warranties. PHOTOMETRY 4' Luminaire 6"W x 2"D Very High Output - 120V Efficacy: 70 lumens per watt Total Luminaire Output: 2578 lumens (645 lumens/foot) 36.9 watts (9.2 watts/foot) CCT: 3500K ITL LM79 Report: CANDELA DISTRIBUTION Flux W W W. F I N E L I T E. C O M 97

61 98 W W W. F I N E L I T E. C O M

62 HP-WG Perimeter Wall Grazer 1/-20 Threaded Rod (by others) THREADED ROD (TR) MOUNTING INSTALLATION Eliminates the need to install mounting hardware prior the completion of the slot framing. Ordering Guide HP-WG - 6W - 4D - 8' - S V - SC - TR - SA - FE-L - FE-R - C1 Finelite HP-WG Optic Width (6W - 6" Width) Regressed Optic Depth (2D - 2" Depth, 4D - Depth, 6D - 6" Depth) Length (2', 3', 4', 8', multiples standard) Light Output (S - Standard, B - Boosted Standard, H - High, V - Very High) LED CRI/CCT ( CRI min, 3000K; CRI min, 3500K; CRI min, 4000K; CRI min, 3000K; CRI min, 3500K; CRI min, 4000K) Voltage (120V, 277V, 347V ) Circuiting (SC - Single Circuit) 1 Mounting (TR - Threaded Rod 2 (standard), WB - Wall Bracket 3 ) Reflector (SA - Specular Aluminum) End Condition Left (FE-L - Flat (standard), PE-L - Pocket Slot) 4 End Condition Right (FE-R - Flat (standard), PE-R - Pocket Slot) 4 Ceiling Type (C1-1" T-Bar, C2-9/16" T-Bar, C3 - screw slot, SF - Spackle Flange) 1 Contact factory for switching options 2 Pre- or post-ceiling 3 Pre-ceiling only 4 The end condition on each side can be specified with different hardware options to accommodate different installation features. Note: For Tunable White, please see Tunable White tech sheet. W W W. F I N E L I T E. C O M 99

63 High Performance Recessed LED Collection HPR LED delivers outstanding performance in a refined and flexible format. Available in a variety of styles, sizes and outputs, this recessed luminaire rises to meet most challenges. 10 Industry Best Year LED Warranty 100 W W W. F I N E L I T E. C O M

64 Project: Burlington Coat Factory HQ Location: Burlington, NJ Architect: KSS Architects Product: HPR LED 2 x 4 Representative: Diversified Lighting Associates W W W. F I N E L I T E. C O M 101

65 HPR LED Features Tailored Output Static White options: Standard (S), Boosted Standard (B), High (H), and Very High (V) Tunable White options: Boosted Standard (B) and Very High (V) Tailored Color Static White options at 3000K, 3500K and 4000K CCT Tunable White options for two-source Tunable White light between 2700K and 6500K CCT 80+ and 90+ CRI options available Tailored Control Dimming from 100% to 10%, standard; 1% available Industry-leading pre-qualified drivers and controls options available Integrated or networked daylight and occupancy sensors options available Simplified white light color tuning design and installation with the FineTune controls system flexible LED and fluorescent light engines, mounting, and diffuser options. Serviceable Drop-down doors and quick-connects for drivers and light engines simplify repairs. Project: Microsoft Location: Redmond, WA Architect: ZGF Architects LLP Product: HPR LED 1x4 Representative: Pacific Lighting Systems 102 W W W. F I N E L I T E. C O M

66 HPR LED Collection 1x4 1x2 1x1 HPW - 2', 4' or 8' 2x4 2x2 Door Styles A - Angled ANR - Angled Narrow Rail F - Flat WAV - Wave CS - Curved Slotted DD - Double DIffuse Optics DCO - Diffuse Center SCO - Slotted Center RCO - Round Center DCO, SCO and RCO are only available on Angled (A), Angled Narrow Rail (ANR), and Flat (F) doors. W W W. F I N E L I T E. C O M 103

67 I C R AT E D HPR LED 2x2 Angled DD 2 2 Flat CS 2 2 WAV 2 Specifications CONSTRuCTiON: Die-formed 20-gauge cold-rolled steel housing. All components are hard-tooled to tolerances of +/- 1/16". UV stabilized weatherstrip pile gasket with polypropylene backing. Hinged door frame assembly provides easy access to light arrays and driver compartment for servicing from below. Seismic brackets are integrated into the luminaire assembly. Additional wire entrances are positioned on the ends of the housing to allow easy wiring access for the installer. RefLeCTORS: Die-formed 20-gauge cold-rolled steel reflectors are finished in 96LG high reflectance matte white powder coat paint. OPTiCaL SYSTeM: Components include diffuser panels and a central optic element held in place with a frame constructed from die-formed cold-rolled steel. The diffusers are UV-stabilized and impact-resistant frosted virgin acrylic, 1/8" thick. They are either angled toward the central optic or parallel to the ceiling plane. The center optical element is held in place by sleek steel rails. The standard center rails are approximately 9/16" wide. Optional narrow rails are approximately 5/16" wide. Optional wave door includes frosted acrylic panel that undulates from side to side. DOuBLe DiffuSe: Visible diffuser: UV-stabilized and impact-resistant frosted virgin acrylic, 1/8" thick. Inner diffuser: 1/8" thick with 60% round perforations white/white. DOOR STYLe: Curved Slotted (CS) includes perforated rails that slope inward and a diffuse frosted acrylic center optic. CeNTeR OPTiC OPTiONS: Only available with Angled (A), Angled Narrow Rail (ANR), and Flat (F) door styles. Diffuse Center Optic (DCO): UV-stabilized and impact-resistant frosted virgin acrylic. Slotted Center Optic (SCO): Die-formed cold-rolled steel panel with a 1/16" x 1/2" rectangular hole pattern. Virgin acrylic overlay. Round Center Optic (RCO): Die-formed cold-rolled steel panel with precisionpunched 3/32" round hole pattern arranged in staggered formation. Virgin acrylic overlay. LiGHT OuTPuT: Four lumen packages available, Standard (S), Boosted Standard (B) High (H), and Very High (V). A separate chart summarizes lumen distribution and wattage. Light engines are replaceable. *See page 183 for photos of door styles LuMeN MaiNTeNaNCe: 90% of initial light output (L90) at 100,000+ hours; 70% of initial light output (L70) at 200,000+ hours. DRiVeR: Replaceable 120V/277V Constant Current Reduction dimming driver standard. Can be wired dimming or non-dimming. 0-10V dimming controls with a range of 10%- 100%. Dimming to 1% available, consult factory. Driver is fully accessible from below the ceiling. Power Factor: Total Harmonic Distortion (THD): <20%. Expected driver lifetime: 100,000 hours. electrical: Optional emergency to generator/inverter wiring, internal generator transfer switch, nightlight wiring, step-dimming driver, backup battery. Chicago Plenum option. Factory-choice low-profile backup battery available. Bodine BSL722 battery pack also available. Backup batteries deliver 1600 lumens (2x2 High and Very High) and 1700 lumens (2x2 Standard and Boosted Standard). One quarter of the 2x2 will be illuminated in emergency mode. integrated SeNSORS: Integrated PIR (Passive Infrared) occupancy and/or daylight sensors available. Refer to Occupancy Sensor and Daylight Sensor tech sheets for more info. MOuNTiNG: Standard flange design works with most lay-in ceiling types. Integral pry-out tabs secure the luminaire to the ceiling grid from above. Tie-in locations for tie-wire on all corners. Consult local code for appropriate tie-wire recommendations. Drywall Kit available. Surface mount and air return versions available; refer to separate tech sheets. finishes: Housing and door assembly painted with 96 LG high reflectance matte white powder coat paint. Optional adder: Anti-microbial paint. Contact factory. feed: Optional whips (with flex connectors) supplied in a maximum of 11' lengths. Lead Wires. WeiGHT: 16 lbs. maximum DLC QuaLifieD: Configurations of this product are listed on the DLC Qualified Products List (QPL). WaRRaNTY: 5-year performance-based warranty on all standard components for High Output (H) and Very High Output (V) luminaires. 10-year performance-based warranty on all standard components for Standard Output (S) and Boosted Standard Output (B) luminaires. Optional accessories such as emergency battery packs are covered by their individual manufacturer warranties. PHOTOMeTRY HRP LED-A-2x2-DCO-V Very High Output - Angled Rail Efficacy: 111 lumens per watt Total luminaire output: 6436 lumens 58.1 watts Peak Candela Value: 0 CCT: 3500K ITL LM79 Report W W W. F I N E L I T E. C O M CANDELA DISTRIBUTION ACROSS Flux

68 I C R AT E D HPR LED 2x4 Angled DD 2 2 Flat CS 2 2 WAV 2 Specifications CONSTRuCTiON: Die-formed 20-gauge cold-rolled steel housing. All components are hard-tooled to tolerances of +/- 1/16". UV stabilized weatherstrip pile gasket with polypropylene backing. Hinged door frame assembly provides easy access to light arrays and driver compartment for servicing from below. Seismic brackets are integrated into the luminaire assembly. Additional wire entrances are positioned on the ends of the housing to allow easy wiring access for the installer. RefLeCTORS: Die-formed 20-gauge cold-rolled steel reflectors are finished in 96LG high reflectance matte white powder coat paint. OPTiCaL SYSTeM: Components include diffuser panels and a central optic element held in place with a frame constructed from die-formed cold-rolled steel. The diffusers are UV-stabilized and impact-resistant frosted virgin acrylic, 1/8" thick. They are either angled toward the central optic or parallel to the ceiling plane. The standard center rails are approximately 9/16" wide. Optional narrow rails are approximately 5/16" wide. Optional wave door includes frosted acrylic panel that undulates from side to side. DOuBLe DiffuSe: Visible diffuser: UV-stabilized and impact-resistant frosted virgin acrylic, 1/8" thick. Inner diffuser: 1/8" thick with 60% round perforations white/white. DOOR STYLe: Curved Slotted (CS) includes perforated rails that slope inward and a diffuse frosted acrylic center optic. CeNTeR OPTiC OPTiONS: Only available with Angled (A), Angled Narrow Rail (ANR), and Flat (F) door styles. Diffuse Center Optic (DCO): UV-stabilized and impact-resistant frosted virgin acrylic. Slotted Center Optic (SCO): Die-formed cold-rolled steel panel with a 1/16" x 1/2" rectangular hole pattern. Virgin acrylic overlay. Round Center Optic (RCO): Die-formed cold-rolled steel panel with precisionpunched 3/32" round hole pattern arranged in staggered formation. Virgin acrylic overlay. LiGHT OuTPuT: Four lumen packages available, Standard (S), Boosted Standard (B), High (H), and Very High (V). A separate chart summarizes lumen distribution and wattage. Light engines are replaceable. *See page 183 for photos of door styles LuMeN MaiNTeNaNCe: 90% of initial light output (L90) at 100,000+ hours; 70% of initial light output (L70) at 200,000+ hours. DRiVeR: Replaceable 120V/277V Constant Current Reduction dimming driver standard. Can be wired dimming or non-dimming. 0-10V dimming controls with a range of 10%- 100%. Dimming to 1% available, consult factory. Driver is fully accessible from below the ceiling. Power Factor: Total Harmonic Distortion (THD): <20%. Expected driver lifetime: 100,000 hours. electrical: Optional emergency to generator/inverter wiring, internal generator transfer switch, nightlight wiring, step-dimming driver, backup battery. Chicago Plenum option. Factory-choice low-profile backup battery available. Bodine BSL722 battery pack also available. Backup batteries deliver 1700 lumens. One quarter of the 2x4 will be illuminated in emergency mode. integrated SeNSORS: Integrated PIR (Passive Infrared) occupancy and/or daylight sensors available. Refer to Occupancy Sensor and Daylight Sensor tech sheets for more info. MOuNTiNG: Standard flange design works with most lay-in ceiling types. Integral pry-out tabs secure the luminaire to the ceiling grid from above. Tie-in locations for tie-wire on all corners. Consult local code for appropriate tie-wire recommendations. Drywall Kit available. Surface mount and air return versions available; refer to separate tech sheets. finishes: Housing and door assembly painted with 96 LG high reflectance matte white powder coat paint. Optional adder: Anti-microbial paint. Contact factory. feed: Optional whips (with flex connectors) supplied in a maximum of 11' lengths. Lead Wires. WeiGHT: 33 lbs. maximum DLC QuaLifieD: Configurations of this product are listed on the DLC Qualified Products List (QPL). WaRRaNTY: 10-year performance-based warranty on all standard components. Optional accessories such as emergency battery packs are covered by their individual manufacturer warranties. PHOTOMeTRY HRP LED-A-2x4-DCO-V Very High Output - Angled Rail Efficacy: 127 lumens per watt Total luminaire output: 6979 lumens 55.1 watts Peak Candela Value: 0 CCT: 3500K ITL LM79 Report CANDELA DISTRIBUTION ACROSS Flux W W W. F I N E L I T E. C O M 105

69 I C R AT E D HPR LED 1x2 Angled ANR 12" 12" Flat DD 12" 12" Specifications CONSTRuCTiON: Die-formed 20-gauge cold-rolled steel housing. All components are hard-tooled to tolerances of +/- 1/16". UV stabilized weatherstrip pile gasket with polypropylene backing. Hinged door frame assembly provides easy access to light arrays and driver compartment for servicing from below. Seismic brackets are integrated into the luminaire assembly. Additional wire entrances are positioned on the ends of the housing to allow easy wiring access for the installer. RefLeCTORS: Die-formed 20-gauge cold-rolled steel reflectors are finished in 96LG high reflectance matte white powder coat paint. OPTiCaL SYSTeM: Components include diffuser panels and a central optic element held in place with a frame constructed from die-formed cold-rolled steel. The diffusers are UV-stabilized and impact-resistant frosted virgin acrylic, 1/8" thick. They are either angled toward the central optic or parallel to the ceiling plane. The standard center rails are approximately 9/16" wide. Optional narrow rails are approximately 5/16" wide. DOuBLe DiffuSe: Visible diffuser: UV-stabilized and impact-resistant frosted virgin acrylic, 1/8" thick. Inner diffuser: 1/8" thick with 60% round perforations white/white. CeNTeR OPTiC OPTiONS: Only available with Angled (A), Angled Narrow Rail (ANR), and Flat (F) door styles. Diffuse Center Optic (DCO): UV-stabilized and impact-resistant frosted virgin acrylic. Slotted Center Optic (SCO): Die-formed cold-rolled steel panel with a 1/16" x 1/2" rectangular hole pattern. Virgin acrylic overlay. Round Center Optic (RCO): Die-formed cold-rolled steel panel with precisionpunched 3/32" round hole pattern arranged in staggered formation. Virgin acrylic overlay. LiGHT OuTPuT: Four lumen packages available, Standard (S), Boosted Standard (B), High (H), and Very High (V). A separate chart summarizes lumen distribution and wattage. Light engines are replaceable. *See page 183 for photos of door styles LuMeN MaiNTeNaNCe: 90% of initial light output (L90) at 100,000+ hours; 70% of initial light output (L70) at 200,000+ hours. DRiVeR: Replaceable 120V/277V Constant Current Reduction dimming driver standard. Can be wired dimming or non-dimming. 0-10V dimming controls with a range of 10% - 100%. Dimming to 1% available; consult factory. Driver is fully accessible from below the ceiling. Power Factor: Total Harmonic Distortion (THD): <20%. Expected driver lifetime: 100,000 hours. electrical: Optional emergency to generator/inverter wiring, internal generator transfer switch, nightlight wiring, step-dimming driver. Chicago Plenum option. integrated SeNSORS: Integrated PIR (Passive Infrared) occupancy and/or daylight sensors available. Refer to Occupancy Sensor and Daylight Sensor tech sheets for more info. MOuNTiNG: Standard flange design works with most lay-in ceiling types. Integral pry-out tabs secure the luminaire to the ceiling grid from above. Tie-in locations for tie-wire on all corners. Consult local code for appropriate tie-wire recommendations. Drywall Kit available. Surface mount and air-return version available; refer to separate tech sheet. finishes: Housing and door assembly painted with 96 LG high reflectance matte white powder coat paint. Optional adder: Anti-microbial paint. Contact factory. feed: Optional whips (with flex connectors) supplied in a maximum of 11' lengths. Lead Wires. WeiGHT: 12 lbs. maximum WaRRaNTY: 10-year performance-based warranty on all standard components. Optional accessories such as emergency battery packs are covered by their individual manufacturer warranties. PHOTOMeTRY HRP LED-F-1x2-DCO-B Boosted Output - Angled Rail Efficacy: 99 lumens per watt Total luminaire output: 1943 lumens 19.7 watts Peak Candela Value: 0 CCT: 3500K ITL LM79 Report CANDELA DISTRIBUTION ACROSS Flux W W W. F I N E L I T E. C O M

70 I C R AT E D HPR LED 1x4 Angled ANR 12" 12" Flat DD 12" 12" Specifications CONSTRuCTiON: Die-formed 20-gauge cold-rolled steel housing. All components are hard-tooled to tolerances of +/- 1/16". UV stabilized weatherstrip pile gasket with polypropylene backing. Hinged door frame assembly provides easy access to light arrays and driver compartment for servicing from below. Seismic brackets are integrated into the luminaire assembly. Additional wire entrances are positioned on the ends of the housing to allow easy wiring access for the installer. RefLeCTORS: Die-formed 20-gauge cold-rolled steel reflectors are finished in 96LG high reflectance matte white powder coat paint. OPTiCaL SYSTeM: Components include diffuser panels and a central optic element held in place with a frame constructed from die-formed cold-rolled steel. The diffusers are UV-stabilized and impact-resistant frosted virgin acrylic, 1/8" thick. They are either angled toward the central optic or parallel to the ceiling plane. The standard center rails are approximately 9/16" wide. Optional narrow rails are approximately 5/16" wide. DOuBLe DiffuSe: Visible diffuser: UV-stabilized and impact-resistant frosted virgin acrylic, 1/8" thick. Inner diffuser: 1/8" thick with 60% round perforations white/white. CeNTeR OPTiC OPTiONS: Only available with Angled (A), Angled Narrow Rail (ANR), and Flat (F) door styles. Diffuse Center Optic (DCO): UV-stabilized and impact resistant frosted virgin acrylic. Slotted Center Optic (SCO): Die-formed cold-rolled steel panel with a 1/16" x 1/2" rectangular hole pattern. Virgin acrylic overlay. Round Center Optic (RCO): Die-formed cold-rolled steel panel with precisionpunched 3/32" round hole pattern arranged in staggered formation. Virgin acrylic overlay. LiGHT OuTPuT: Four lumen packages available, Standard (S), Boosted Standard (B), High (H), and Very High (V). A separate chart summarizes lumen distribution and wattage. Light engines are replaceable. *See page 183 for photos of door styles LuMeN MaiNTeNaNCe: 90% of initial light output (L90) at 100,000+ hours; 70% of initial light output (L70) at 200,000+ hours. DRiVeR: Replaceable 120V/277V Constant Current Reduction dimming driver standard. Can be wired dimming or non-dimming. 0-10V dimming controls with a range of 10% - 100%. Dimming to 1% available; consult factory. Driver is fully accessible from below the ceiling. Power Factor: Total Harmonic Distortion (THD): <20%. Expected driver lifetime: 170,000 hours. electrical: Optional emergency to generator/inverter wiring, internal generator transfer switch, nightlight wiring, step-dimming driver, backup battery. Chicago Plenum option. Factory-choice low-profile backup battery available. Bodine BSL722 battery pack also available. Backup batteries deliver 1500 lumens. One half of the 1x4 will be illuminated in emergency mode. integrated SeNSORS: Integrated PIR (Passive Infrared) occupancy and/or daylight sensors available. Refer to Occupancy Sensor and Daylight Sensor tech sheets for more info. MOuNTiNG: Standard flange design works with most lay-in ceiling types. Integral pry-out tabs secure the luminaire to the ceiling grid from above. Tie-in locations for tie-wire on all corners. Consult local code for appropriate tie-wire recommendations. Drywall Kit available. Surface mount and air-return versions available; refer to separate tech sheets. finishes: Housing and door assembly painted with 96 LG high reflectance matte white powder coat paint. Optional adder: Anti-microbial paint. Contact factory. feed: Optional whips (with flex connectors) supplied in a maximum of 11' -lengths. Lead Wires. WeiGHT: 25 lbs. maximum WaRRaNTY: 10-year performance-based warranty on all standard components. Optional accessories such as emergency battery packs are covered by their individual manufacturer warranties. PHOTOMeTRY HRP LED-F-1x4-DCO-B Boosted Output - Angled Rail Efficacy: 107 lumens per watt Total luminaire output: 3985 lumens 37.1 watts Peak Candela Value: 0 CCT: 3500K ITL LM79 Report CANDELA DISTRIBUTION Flux Refer to the Finelite website for additional photometry and product information. W W W. F I N E L I T E. C O M 107

71 I C R AT E D HPR LED 1x1 DD 12-1/5" 13-1/2" 5-3/5" Angled 5-5/8" Flat 5-5/8" 12-3/16" 13-1/2" 12-3/16" 13-1/2" Specifications CONSTRuCTiON: Die-formed 20-gauge cold-rolled steel housing. All components are hard-tooled to tolerances of +/- 1/16". UV stabilized weatherstrip pile gasket with polypropylene backing. Hinged door frame assembly provides easy access to light arrays and driver compartment for servicing from below. Seismic brackets are integrated into the luminaire assembly. Additional wire entrances are positioned on the ends of the housing to allow easy wiring access for the installer. RefLeCTORS: Die-formed 20-gauge cold-rolled steel reflectors are finished in 96LG high reflectance matte white powder coat paint. OPTiCaL SYSTeM: Components include diffuser panels and a central optic element held in place with a frame constructed from die-formed cold-rolled steel. The diffusers are UV-stabilized and impact-resistant frosted virgin acrylic, 1/8" thick. They are either angled toward the central optic or parallel to the ceiling plane. DOuBLe DiffuSe: Visible diffuser: UV-stabilized and impact-resistant frosted virgin acrylic, 1/8" thick. Inner diffuser: 1/8" thick with 60% round perforations white/white. CeNTeR OPTiC OPTiONS: Only available with Angled (A) and Flat (F) door styles. Diffuse Center Optic (DCO): UV-stabilized and impact-resistant frosted virgin acrylic. Slotted Center Optic (SCO): Die-formed cold-rolled steel panel with a 1/16" x 1/2" rectangular hole pattern. Virgin acrylic overlay. Round Center Optic (RCO): Die-formed cold-rolled steel panel with precisionpunched 3/32" round hole pattern arranged in staggered formation. Virgin acrylic overlay. *See page 183 for photos of door styles LiGHT OuTPuT: Four lumen packages available, Standard (S), Boosted Standard (B), High (H), and Very High (V). A separate chart summarizes lumen distribution and wattage. Light engines are replaceable. LuMeN MaiNTeNaNCe: 90% of initial light output (L90) at 100,000+ hours; 70% of initial light output (L70) at 200,000+ hours. DRiVeR: Replaceable 120V/277V Constant Current Reduction dimming driver standard. Can be wired dimming or non-dimming. 0-10V dimming controls with a range of 10% - 100%. Dimming to 1% available; consult factory. Driver is fully accessible from below the ceiling. Power Factor: Total Harmonic Distortion (THD): <20%. electrical: Optional emergency to generator/inverter wiring, internal generator transfer switch, nightlight wiring, step-dimming driver. Chicago Plenum option. Bodine BSL722 battery backup also available. MOuNTiNG: Standard flange design works with most lay-in ceiling types. Integral pry-out tabs secure the luminaire to the ceiling grid from above. Tie-in locations for tie-wire on all corners. Consult local code for appropriate tie-wire recommendations. Drywall Kit available. finishes: Housing and door assembly painted with 96 LG high reflectance matte white powder coat paint. Optional adder: Anti-microbial paint. Contact factory feed: Optional whips (with flex connectors) supplied in a maximum of 11' lengths. Lead Wires. WeiGHT: 10 lbs. maximum WaRRaNTY: 10-year performance-based warranty on all standard components. Optional accessories such as emergency battery packs are covered by their individual manufacturer warranties. PHOTOMeTRY HRP LED-A-1x1-DCO-B Boosted Output - Angled Rail Efficacy: 97 lumens per watt Total luminaire output: 1914 lumens 19.7 watts Peak Candela Value: 0 CCT: 3500K ITL LM79 Report CANDELA DISTRIBUTION ACROSS Flux W W W. F I N E L I T E. C O M

72 I C R AT E D HPR LED-EP 2x2 Angled ANR 2 2 Flat CS 2 2 Specifications CONSTRuCTiON: Die-formed 20-gauge cold-rolled steel housing. All components are hard-tooled to tolerances of +/- 1/16". UV stabilized weatherstrip pile gasket with polypropylene backing. Hinged door frame assembly provides easy access to light arrays and driver compartment for servicing from below. Seismic brackets are integrated into the luminaire assembly. Additional wire entrances are positioned on the ends of the housing to allow easy wiring access for the installer. RefLeCTORS: Die-formed 20-gauge cold-rolled steel reflectors are finished in 96LG high reflectance matte white powder coat paint. OPTiCaL SYSTeM: Components include diffuser panels and a central optic element held in place with a frame constructed from die-formed cold-rolled steel. The diffusers are UV-stabilized and impact-resistant frosted virgin acrylic, 1/8" thick. They are either angled toward the central optic or parallel to the ceiling plane. The standard center rails are approximately 9/16" wide. Optional narrow rails are approximately 5/16" wide. DOOR STYLe: Curved Slotted (CS) includes perforated rails that slope inward and a diffuse frosted acrylic center optic. CeNTeR OPTiC OPTiONS: Only available with Angled (A), Angled Narrow Rail (ANR), and Flat (F) door styles. Diffuse Center Optic (DCO): UV-stabilized and impact-resistant frosted virgin acrylic. Slotted Center Optic (SCO): Die-formed cold-rolled steel panel with a 1/16" x 1/2" rectangular hole pattern. Virgin acrylic overlay. Round Center Optic (RCO): Die-formed cold-rolled steel panel with precisionpunched 3/32" round hole pattern arranged in staggered formation. Virgin acrylic overlay. LiGHT OuTPuT: Four lumen packages available. Standard (S), Bosted Standard (B), High (H), and Very High (V). A separate chart summarizes lumen distribution and wattage. Light engines are replaceable. *See page 183 for photos of door styles LuMeN MaiNTeNaNCe: 90% of initial light output (L90) at 100,000+ hours; 70% of initial light output (L70) at 200,000+ hours. DRiVeR: Replaceable 120V/277V Constant Current Reduction dimming driver standard. Can be wired dimming or non-dimming. 0-10V dimming controls with a range of 10%- 100%. Dimming to 1% available; consult factory. Driver is fully accessible from below the ceiling. Power Factor: Total Harmonic Distortion (THD): <20%. electrical: Optional emergency to generator/inverter wiring, internal generator transfer switch, nightlight wiring, step-dimming driver, backup battery. Chicago Plenum option. Factory-choice low-profile backup battery available. Bodine BSL722 battery pack also available. Backup batteries deliver 1600 lumens. One half of the 2x2 will be illuminated in emergency mode. integrated SeNSORS: Integrated PIR (Passive Infrared) occupancy and/or daylight sensors available. Refer to Occupancy Sensor and Daylight Sensor tech sheets for more info. MOuNTiNG: Standard flange design works with most lay-in ceiling types. Integral pry-out tabs secure the luminaire to the ceiling grid from above. Tie-in locations for tie-wire on all corners. Consult local code for appropriate tie-wire recommendations. Drywall Kit available. Surface mount and air return versions available; refer to separate tech sheets. finishes: Housing and door assembly painted with 96 LG high reflectance matte white powder coat paint. Optional adder: Anti-microbial paint. Contact factory. feed: Optional whips (with flex connectors) supplied in a maximum of 11' lengths. Lead Wires. WeiGHT: 16 lbs. maximum WaRRaNTY: 5-year performance-based warranty on all standard components for High Output (H) and Very High Output (V) luminaires. 10-year performance-based warranty on all standard components for Standard Output (S) and Boosted Standard Output (B) luminaires. Optional accessories such as emergency battery packs are covered by their individual manufacturer warranties. PHOTOMeTRY HRP LED-EP-F-2x2-DCO-V Very High Output - Flat Rail Efficacy: 92 lumens per watt Total luminaire output: 5871 lumens 58.3 watts Peak Candela Value: 0 CCT: 3500K ITL LM79 Report CANDELA DISTRIBUTION ACROSS Flux W W W. F I N E L I T E. C O M 109

73 I C R AT E D HPR LED-EP 2x4 Angled ANR 2 2 Flat CS 2 2 Specifications CONSTRuCTiON: Die-formed 20-gauge cold-rolled steel housing. All components are hard-tooled to tolerances of +/- 1/16". UV stabilized weatherstrip pile gasket with polypropylene backing. Hinged door frame assembly provides easy access to light arrays and driver compartment for servicing from below. Seismic brackets are integrated into the luminaire assembly. Additional wire entrances are positioned on the ends of the housing to allow easy wiring access for the installer. RefLeCTORS: Die-formed 20-gauge cold-rolled steel reflectors are finished in 96LG high reflectance matte white powder coat paint. OPTiCaL SYSTeM: Components include diffuser panels and a central optic element held in place with a frame constructed from die-formed cold-rolled steel. The diffusers are UV-stabilized and impact-resistant frosted virgin acrylic, 1/8" thick. They are either angled toward the central optic or parallel to the ceiling plane. The standard center rails are approximatley 9/16" wide. Optional narrows rails are approximatley 5/16" wide. DOOR STYLe: Curved Slotted (CS) includes perforated rails that slope inward and a diffuse frosted acrylic center optic. CeNTeR OPTiC OPTiONS: Only available with Angled (A), Angled Narrow Rail (ANR), and Flat (F) door styles. Diffuse Center Optic (DCO): UV-stabilized and impact-resistant frosted virgin acrylic. Slotted Center Optic (SCO): Die-formed cold-rolled steel panel with a 1/16" x 1/2" rectangular hole pattern. Virgin acrylic overlay. Round Center Optic (RCO): Die-formed cold-rolled steel panel with precisionpunched 3/32" round hole pattern arranged in staggered formation. Virgin acrylic overlay. LiGHT OuTPuT: Four lumen packages available, Standard (S), Boosted Standard (B), High (H), and Very High (V). A separate chart summarizes lumen distribution and wattage. Light engines are replaceable. *See page 183 for photos of door styles LuMeN MaiNTeNaNCe: 90% of initial light output (L90) at 100,000+ hours; 70% of initial light output (L70) at 200,000+ hours. DRiVeR: Replaceable 120V/277V Constant Current Reduction dimming driver standard. Can be wired dimming or non-dimming. 0-10V dimming controls with a range of 10%- 100%. Dimming to 1% available, consult factory. Driver is fully accessible from below the ceiling. Power Factor: Total Harmonic Distortion (THD): <20%. Expected driver lifetime: 170,000 hours. electrical: Optional emergency to generator/inverter wiring, internal generator transfer switch, nightlight wiring, step-dimming driver, backup battery. Chicago Plenum option. Factory-choice low-profile backup battery available. Bodine BSL722 battery pack also available. Backup batteries deliver 1700 lumens. One quarter of the 2x4 will be illuminated in emergency mode. integrated SeNSORS: HPR LED-EP can be specified with integrated PIR (Passive Infrared) occupancy sensors or daylight sensors. Refer to Occupancy Sensor and Daylight Sensor tech sheets for more info. MOuNTiNG: Standard flange design works with most lay-in ceiling types. Integral pry-out tabs secure the luminaire to the ceiling grid from above. Tie-in locations for tie-wire on all corners. Consult local code for appropriate tie-wire recommendations. Drywall Kit available. Surface mount and air return versions available; refer to separate tech sheets. finishes: Housing and door assembly painted with 96 LG high reflectance matte white powder coat paint. Optional adder: Anti-microbial paint. Contact factory. feed: Optional whips (with flex connectors) supplied in a maximum of 11' lengths. Lead Wires. WeiGHT: 33 lbs. maximum WaRRaNTY: 10-year performance-based warranty on all standard components. Optional accessories such as emergency battery packs are covered by their individual manufacturer warranties. PHOTOMeTRY HRP LED-EP-A-2x4-DCO-V Very High Output - Flat Rail Efficacy: 117 lumens per watt Total luminaire output: 6444 lumens 55.1 watts Peak Candela Value: 0 CCT: 3500K ITL LM79 Report CANDELA DISTRIBUTION ACROSS Flux W W W. F I N E L I T E. C O M

74 High Performance Recessed LED (HPR LED) Project: SHI Location: Somerset, NJ Architect: Cornerstone Architectural Group. LLC Product: High Performance Wallwash (HPR) 1x1 Representative: Liberty Lighting Ordering Guide Finelite Series HPR LeD Finelite Series HPR LeD-eP 1 Door Styles (a - Angled, anr - Angled Narrow Rail 2, f - Flat, CS - Curved Slotted 1, DD - Double Diffuse 3, WaV - Wave 1 ) ß Size (2x4, 2x2, 1x4, 1x2, 1x1) Center Optic (DCO - Diffuse Center, SCO - Slotted Center, RCO - Round Center) Light Output 2x4 (S - Standard, H - High, V - Very High) Light Output 2x2 (S - Standard, H - High) ß Light Output 1x4 (S - Standard) Light Output 1x2 (S - Standard) Light Output 1x1 (S - Standard) LED CRI/CCT ( CRI min, 3000K; CRI min, 3500K; CRI min, 4000K; CRI min, 3000K; CRI min, 3500K; CRI min, 4000K) Voltage (120V, 277V) Circuiting (SC - Single Circuit) Mounting (C1-1" T-Bar, C2-9/16" T-Bar, C3 - Screw Slot, DW - Drywall Kit, SM - Surface Mount 2 ) Integrated Sensors (OBD - Daylight, OBO - Occupancy, OBB - Both) 4 Air Return (ar - 2x4, 2x2, and 1x4 in Angled and Flat only) 1 Available in 2x4 & 2x2 only. 2 Not available with 1x1. 3 Flat Door and LED only. 4 Not available with DD. ß Wave doors only available with Diffuse Center Optic (DCO). HPR-LED is RoHS compliant. Contact factory for Master/Satellite and factory-supplied whip options. Contact Factory for Bi-level option. HPR LED - A - 2x2 - DCO - S V - SC - C1 - OBO - AR W W W. F I N E L I T E. C O M 111

75 I C R AT E D HPW-LED Feature Spotlight 100% Serviceable from Below Shielding Quick Connect Harness Light Engine 3000K, 3500K, 4000K Ceiling System information Frosted 5 3 / 8" 9/16" T-bar 15/16" T-bar Screw Slot T-bar Specifications CONSTRuCTiON: Fixture assembly constructed using die-formed, 20-gauge, cold-rolled steel housing and ends. Lens and drivers are easily removable from driver below ceiling without the need for tools. The compartment is also accessible from below ceiling by removing the reflector cover. Seismic brackets are integrated into the fixture assembly. RefLeCTORS: Reflector is die-formed 25-gauge Alanod 8516GP semi-specular aluminum with 94% high reflectance finish. OPTiCaL SYSTeM: Luminaires are standard with frosted diffusers. All diffusers are UV-stabilized and impact resistant virgin acrylic. Frosted diffusers are 1/8 thick. LiGHT OuTPuT: Four lumen packages available, Standard (S), Boosted Standard (B), High Output (H), and Very High Output (V). A separate chart summarizes lumen distribution and wattage. Light engines are replaceable. LuMeN MaiNTeNaNCe: 90% of initial light output (L90) at 100,000+ hours; 70% of initial light output (L70) at 200,000+ hours. electrical: 120v or 277v prewired. Optional Chicago Plenum available. Contact factory. Low profile battery backup available. Battery backup delivers 1500 lumens. Half of a 4' section (across) will be illuminated in emergency mode. MOuNTiNG: Standard flange design works with most lay-in ceiling types. Integral pry out tabs secure luminaire to ceiling grid. Support to structure locations on each corner. Consult local code for appropriate support to structure recommendations. Optional drywall kit available. finishes: Housing assembly painted with Signal White powder coat finish. LeNGTHS: Luminaires are available in 2', 4', and 8' section lengths and can be joined together with factory supplied plug together wiring harnesses. WeiGHT: 2' - 14 lbs., 4' - 18 lbs, 8' - 30 lbs. WaRRaNTY: 10-year performance-based warranty on all standard components. Optional accessories such as emergency battery packs are covered by their individual manufacturer warranties. PHOTOMeTRY - 4' Luminaire Very High Output Efficacy: 99 Lumens per watt Total Luminaire Output: 5756 lumens (1439 lumens/foot) 57.9 watts (14.5 watts/foot) Peak Candela Value: 2083@ 25º CCT: 3500K; CRI: 80 ITL LM79 Report ITL85170 CANDELA DISTRIBUTION Flux Refer to the Finelite website for additional photometry and product information. 112 W W W. F I N E L I T E. C O M

76 High Performance Wall LED (HPW-LED) Project: SHI Location: Somerset, NJ Architect: Cornerstone Architectural Group. LLC Product: HPW-LED Representative: Liberty Lighting Ordering Guide HPW-LED - 4' - FR - S V - SC - C1 Finelite Series HPW-LeD Length (2', 4', or 8') Lens Optic (fr - Frosted) Light Output (S - Standard, B - Boosted Standard, H - High, V - Very High) LED CRI/CCT ( CRI min, 3000K; CRI min, 3500K; CRI min, 4000K; CRI min, 3000K; CRI min, 3500K; CRI min, 4000K) Driver (120V, 277V) Circuiting (SC - Single Circuit) Mounting (C1-1" T-Bar, C2-9/16" T-Bar, C3 - Screw Slot, DW - Drywall Kit) W W W. F I N E L I T E. C O M 113

77 Series 16 Flexibility Efficacy Affordability With a timeless design and advanced optical system, Series 16 has three LED models the affordable, high-efficacy 2-Engine, the flexible 3-Engine with separate uplight and downlight intensity controls, and a downlight optimized 4-Engine, as well as a fluorescent model. High performance classrooms, stringent energy requirements, low ceiling applications Series 16 helps designers achieve their goals. 10 Industry Best Year LED Warranty 2E & 3E 2E & 3E 114 W W W. F I N E L I T E. C O M

78 Project: Indeed Location: Seattle, WA Architect: Tully Associates Product: Series 16 LED 3E Representatives: Pacific Lighting Systems W W W. F I N E L I T E. C O M 115

79 Series 16 LED Feature Spotlight extended endcap (Optional) flat endcap (Standard) Mid-Power LeDs Mid-power LEDs run cool. Expected lifetime: L90 at 100,000+ hours. L70 at 200,000+ hours. LiGHT engines OPTiC & DiSTRiBuTiON RaTiO OPTiONS 2 Engine Open Frosted Top Optic (FTO) Clear Top Optic (CTO) 1-7/8" LED Engine 7-5/8" Distribution Ratios Total Direct Optic (TDO) 10% / 90% 20% / 80% 30% / 70% 40% / 60% 3 Engine Open Frosted Top Optic (FTO) 1-7/8" 7-5/8" 4 Engine Distribution Ratios Total Direct Optic (TDO) 1-7/8" 7-5/8" Available with factory presets in 3000, 4000, and 5000 lumens. 10% / 90% 20% / 80% 30% / 70% 40% / 60% 116 W W W. F I N E L I T E. C O M

80 Series 16 LED Specifications CONSTRuCTiON: Body is 20-gauge die-formed steel with an 18-gauge die-formed internal joiner system. Plug-together wiring standard. All components are hard-tooled to tolerances of ± 0.010". endcaps: The Flat Endcap (FE) is standard and made of 20-gauge die-formed steel adding 1/8" at each end. The optional Extended Endcap (EE) is an aluminum diecast endcap with a 1/8" reveal adding 2-1/2" at each end. OPTiCS & DiSTRiBuTiON RaTiOS: Open Standard (2E, 3E) FTO Frosted Top Optic (2E, 3E) CTO Clear Top Optic (2E) TDO Total Direct Optic (2E, 4E) 10U90D 10% up / 90% down (2E, 4E) 20U80D 20% up / 80% down (2E, 4E) 30U70D 30% up / 70% down (2E, 4E) 40U60D 40% up / 60% down (2E, 4E) LiGHT OuTPuT: 2e & 3e; Four lumen packages available, Standard (S), Boosted Standard (B), High (H), and Very High (V). 4e; three lumen packages avialble, Standard (S), 3000 lumens, Boosted Standard (B), 4000 lumens, High (H), 5000 lumens. A separate chart summarizes lumen distribution and wattage. Light engines are replaceable. LuMeN MaiNTeNaNCe: 90% of initial light output (L90) at 100,000+ hours; 70% of initial light output (L70) at 200,000+ hours. DRiVeR: Replaceable 120V/277V Constant Current Reduction dimming driver standard. Can be wired dimming or non-dimming. 0-10V dimming controls with a range of 10%-100%. Dimming to 1% available; consult factory. Driver is fully accessible from below the ceiling. Power Factor: Total Harmonic Distortion (THD): <20%. Expected driver lifetime: 100,000 hours. electrical: Optional emergency to generator/inverter wiring, internal generator transfer switch, nightlight wiring, step-dimming driver, backup battery. Optional Chicago Plenum available. 3e PeNDaNT: A factory-choice low-profile backup battery is available (8' minimum luminaire length). Backup batteries deliver 1500 lumens. The downlight engine will be illuminated in a 4' section in emergency mode. 4e PeNDaNT: A factory-choice low-profile backup battery is available (8' minimum luminaire length). Backup batteries deliver 1500 lumens. The downlight engine will be illuminated in a 4' section in emergency mode. integrated SeNSORS: Daylight sensors and Integrated PIR (Passive Infrared) occupancy sensors available. Refer to Occupancy Sensor and Daylight Sensor tech sheets for more info. MOuNTiNG: 50" Fully Adjustable (FA) plated steel aircraft cable with safety stop hardware standard. Contact factory for additional lengths up to 150". Optional semi-adjustable Aircraft Cable (AC) (± 0.5") in lengths of 12", 15", 18", 21", 2, 27", 30", 36". finishes: Finelite Signal White powder coat standard. Optional Adders: 185 non-metallic RAL colors. feed: Standard with one 18-gauge/5-conductor single-circuit feed. 14-gauge feed used when luminaire current exceeds 5 amps. LeNGTH: Standard 4' and 8' section lengths canbe combined to make longer runs. Contact factory additional lengths. WeiGHT : 3.0 lb/ft. DLC QuaLifieD: Configurations of this product are listed on the DLC Qualified Products List (QPL). WaRRaNTY: 10-year performance-based warranty on all standard components. Optional accessories such as emergency battery packs are covered by their individual manufacturer warranties. 2e PeNDaNT: A factory-choice low-profile backup battery is available (8' minimum luminaire length). Backup batteries deliver 1700 lumens. A 4' section will be illuminated in emergency mode. PHOTOMeTRY 2e Open - 4' Luminaire* PHOTOMeTRY 3e Open - 4' Luminaire* PHOTOMeTRY 4e Distribution Ratio - 4' Luminaire* 10U90D 20U80D U70D 40U60D TDO Series 16-LED-ID-DCO-2e-V-835-OPeN Distribution: 76% Up / 24% Down Efficacy: 127 lumens per watt Total luminaire output: 4722 lumens (1181 lumens/foot) 37.3 watts (9.3 watts/foot) ITL LM79 Report Series 16-LED-ID-DCO-3e-V-V-835-OPeN Distribution: 67% Up / 33% Down Efficacy: 117 lumens per watt Total luminaire output: 6657 lumens (1664 lumens/foot) 56.8 watts (14.2 watts/foot) CCT: 3500K ITL LM79 Report Series 16-LED-ID-DCO-4e-H u70D Efficacy: 117 lumens per watt Total luminaire output: 5000 lumens (1250 lumens/foot) 42.9 watts (10.7 watts/foot) Source Report (Family Correlation) *For full Photometry details see Series 16 technical sheet. W W W. F I N E L I T E. C O M 117

81 Series 16 LED WM Feature Spotlight Signal White is standard finish extended endcap Mid-Power LeDs Mid-power LEDs run cool. Expected lifetime: L90 at 100,000+ hours. L70 at 200,000+ hours. LiGHT engines OPTiC & DiSTRiBuTiON RaTiO OPTiONS 3/8" 1-7/8" 2 Engine LED Engine Open Frosted Top Optic (FTO) Clear Top Optic (CTO) 1" 7-5/8" Distribution Ratios Total Direct Optic (TDO) 10% / 90% 30% / 70% 20% / 80% 40% / 60% 3/8" 3 Engine Open 1-7/8" 1" M 7-5/8" 3/8" 1-7/8" 4 Engine Distribution Ratios Total Direct Optic (TDO) 7-5/8" 1" M Available with factory presets in 3000, 4000, and 5000 lumens. 10% / 90% 30% / 70% 20% / 80% 40% / 60% 118 W W W. F I N E L I T E. C O M

82 Series 16 LED WM Specifications CONSTRuCTiON: Body is 20-gauge die-formed steel with an 18-gauge die-formed internal joiner system. Plug-together wiring standard. All components are hard-tooled to tolerances of ± 0.010". endcaps: The Flat Endcap (FE) is standard and made of 20-gauge die-formed steel adding 1/8" at each end. The optional Extended Endcap (EE) is an aluminum die-cast endcap with a 1/8" reveal adding 2-1/2" at each end. OPTiCS & DiSTRiBuTiON RaTiOS: Open Standard (2E, 3E) FTO Frosted Top Optic (2E, 3E) CTO Clear Top Optic (2E) TDO Total Direct Optic (2E, 4E) 10U90D 10% up / 90% down (2E, 4E) 20U80D 20% up / 80% down (2E, 4E) 30U70D 30% up / 70% down (2E, 4E) 40U60D 40% up / 60% down (2E, 4E) LiGHT OuTPuT: 2e & 3e; Four lumen packages available, Standard (S), Boosted Standard (B), High (H), and Very High (V). 4e; three lumen packages avialble, Standard (S), 3000 lumens, Boosted Standard (B), 4000 lumens, High (H), 5000 lumens. A separate chart summarizes lumen distribution and wattage. Light engines are replaceable. LuMeN MaiNTeNaNCe: 90% of initial light output (L90) at 100,000+ hours; 70% of initial light output (L70) at 200,000+ hours. DRiVeR: Replaceable 120V/277V Constant Current Reduction dimming driver standard. Can be wired dimming or non-dimming. 0-10V dimming controls with a range of 10%-100%. Dimming to 1% available; consult factory. Driver is fully accessible from below the ceiling. Power Factor: Total Harmonic Distortion (THD): <20%. Expected driver lifetime: 100,000 hours. electrical: Optional emergency to generator/inverter wiring, internal generator transfer switch, nightlight wiring, step-dimming driver, backup battery. Optional Chicago Plenum available. 2e WaLL MOuNT: A factory-choice low-profile backup battery is available (8' minimum luminaire length). Backup batteries deliver 1700 lumens. A 4' section will be illuminated in emergency mode. 3e WaLL MOuNT: A factory-choice low-profile backup battery is available (8' minimum luminaire length). Backup batteries deliver 1500 lumens. The downlight engine will be illuminated in a 4' section in emergency mode. 4e WaLL MOuNT: A factory-choice low-profile backup battery is available (8' minimum luminaire length). Backup batteries deliver 1500 lumens. The downlight engine will be illuminated in a 4' section in emergency mode. integrated SeNSORS: Daylight sensors and Integrated PIR (Passive Infrared) occupancy sensors available. Refer to Occupancy Sensor and Daylight Sensor tech sheets for more info. MOuNTiNG: The standard mount is a hidden bracket constructed of 14-gauge steel mounted to the luminaire using #10 screws. Two brackets are provided for every luminaire section. A leveling screw is included to ensure the luminaire is perpendicular to the vertical wall surface. finishes: Finelite Signal White powder coat standard. Optional Adders: 185 non-metallic RAL colors. feed: Standard with one 18-gauge/5-conductor single-circuit feed. 14-gauge feed used when luminaire current exceeds 5 amps. LeNGTHS: Standard 4' and 8' section lengths can be combined to make longer runs. Contact factory additional lengths. WeiGHTS: With Flat Endcaps (FE) lb/ft; with Curved Endcaps (CE) 2.6 to 3.6 lb/ft. DLC QuaLifieD: Configurations of this product are listed on the DLC Qualified Products List (QPL). WaRRaNTY: 10-year performance-based warranty on all standard components. Optional accessories such as emergency battery packs are covered by their individual manufacturer warranties. PHOTOMeTRY 2e Open - 4' Luminaire* PHOTOMeTRY 3e Open - 4' Luminaire* PHOTOMeTRY 4e Distribution Ratio - 4' Luminaire* 10U90D 20U80D U70D 40U60D TDO Series 16-LED-ID-DCO-2e-V-835-OPeN Distribution: 76% Up / 24% Down Efficacy: 127 lumens per watt Total luminaire output: 4722 lumens (1181 lumens/foot) 37.3 watts (9.3 watts/foot) ITL LM79 Report Applies to Pendant and Wall Mount Series 16-LED-ID-DCO-3e-V-V-835-OPeN Distribution: 67% Up / 33% Down Efficacy: 117 lumens per watt Total luminaire output: 6657 lumens (1664 lumens/foot) 56.8 watts (14.2 watts/foot) CCT: 3500K ITL LM79 Report Series 16-LED-ID-DCO-4e-H u70D Efficacy: 117 lumens per watt Total luminaire output: 5000 lumens (1250 lumens/foot) 42.9 watts (10.7 watts/foot) Source Report (Family Correlation) *For full Photometry details see Series 12 technical sheet. W W W. F I N E L I T E. C O M 119

83 Series 16 LED Ordering Guide S16 LED-ID - DCO - 8' - 2E - S U90D - 120V - SC - FA - FE - C1 - OBO Finelite Series 16 LeD (id - Indirect/Direct) 1 Finelite Series 16 LeD WM (id - Indirect/Direct) 1 Shielding (DCO - Diffuse Center) 3E: / Length (4', 8', multiples standard) Light Engine System (2e - 2 Light Engine) (3e - 3 Light Engine) (4e - 4 Light Engine) Output 2E (S - Standard, B - Boosted Standard, H - High, V - Very High) 3E Up (S - Standard, B - Boosted Standard, H - High, V - Very High) 3E DN (S - Standard, B - Boosted Standard, H - High, V - Very High) 4E (S lumens, B lumens, H lumens) LED CRI/CCT ( CRI min, 3000K; CRI min, 3500K; CRI min, 4000K; CRI min, 3000K; CRI min, 3500K; CRI min, 4000K) Optic or Distribution Ratio 2E: OPeN - standard 3E: OPeN - standard 4E: TDO fto - Frosted Top Optic fto - Frosted Top Optic 10u90D CTO - Clear Top Optic 20u80D TDO - Total Direct Optic 30u70D 10u90D 40u60D 20u80D 30u70D 40u60D Voltage (120V, 277V) Circuiting (SC - Single Circuit) 2 Pendant Mount (fa - Fully Adjustable (standard), ac - semi-adjustable) Wall Mount (MB - Mounting Bracket) Endcap (fe - Flat Endcap (standard), ee - Extended Endcap) Ceiling Type (C1-1" T-Bar, C2-9/16" T-Bar, C3 - slot grid, C4 - hard ceiling) Integrated Sensors (OBD - Daylight, OBO - Occupancy) 1 Indirect luminaires available on 2E and 3E 2 Contact factory for switching options Note: For Tunable White please see Tunable White technical sheet. 120 W W W. F I N E L I T E. C O M

84 Project: Indeed Location: Seattle, WA Architect: Tully Associates Product: Series 16 LED 3E Representatives: Pacific Lighting Systems W W W. F I N E L I T E. C O M 121

85 Series 12 Classic Shape Affordable Efficient A classic shape is transformed by new LED performance levels. Series 12 has three LED models the affordable, high-efficacy 2-Engine, the flexible 3-Engine with separate uplight and downlight intensity controls, and a downlight optimized 4-Engine, as well as a fluorescent model. The efficacious and affordable 2E is the perfect choice for energy and budget conscious projects. 3E and 4E deliver enhanced flexibility with independently controlled uplight and downlight. 10 Industry Best Year LED Warranty 122 W W W. F I N E L I T E. C O M

86 Project: Sport Ngin Location: Minneapolis, MN Architect: Tanek Product: S12-LED 2E Representatives: Luma Sales Associates 123

87 Series 12 LED Feature Spotlight Curved endcap (Optional) flat endcap (Standard) Mid-Power LeDs Mid-power LEDs run cool. Expected lifetime: L90 at 100,000+ hours. L70 at 200,000+ hours. LiGHT engines OPTiC & DiSTRiBuTiON RaTiO OPTiONS 2 Engine Open Frosted Top Optic (FTO) Clear Top Optic (CTO) LED Engine 2-5/8" 9" Distribution Ratios Total Direct Optic (TDO) 10% / 90% 30% / 70% 20% / 80% 3 Engine Open Frosted Top Optic (FTO) Clear Top Optic (CTO) 2-5/8" " " 9" 4 Engine Distribution Ratios Total Direct Optic (TDO) 2-5/8" 9" Available with factory presets in 3000, 4000, and 5000 lumens. 10% / 90% 30% / 70% 20% / 80% 40% / 60% 124 W W W. F I N E L I T E. C O M

88 Series 12 LED Specifications CONSTRuCTiON: Body is 20-gauge die-formed steel with an 18-gauge die-formed internal joiner system. Plug-together wiring standard. All components are hard-tooled to tolerances of ±0.010". endcaps: The Flat Endcap (FE) is standard and made of 20-gauge die-formed steel adding 1/8" at each end. The optional Curved Endcap (CE) is an aluminum die-cast endcap with a 1/8" reveal adding 5" at each end. OPTiCS & DiSTRiBuTiON RaTiOS: Open Standard (2E, 3E) FTO Frosted Top Optic (2E, 3E) CTO Clear Top Optic (2E, 3E) TDO Total Direct Optic (2E, 4E) 10U90D 10% up / 90% down (2E, 4E) 20U80D 20% up / 80% down (2E, 4E) 30U70D 30% up / 70% down (2E, 4E) 40U60D 40% up / 60% down (4E Only) LiGHT OuTPuT: 2e & 3e; Four lumen packages available, Standard (S), Boosted Standard (B), High (H), and Very High (V). 4e; three lumen packages avialble, Standard (S), 3000 lumens, Boosted Standard (B), 4000 lumens, High (H), 5000 lumens. A separate chart summarizes lumen distribution and wattage. Light engines are replaceable. LuMeN MaiNTeNaNCe: 90% of initial light output (L90) at 100,000+ hours; 70% of initial light output (L70) at 200,000+ hours. DRiVeR: Replaceable 120V/277V Constant Current Reduction dimming driver standard. Can be wired dimming or non-dimming. 0-10V dimming controls with a range of 10%-100%. Dimming to 1% available; consult factory. Driver is fully accessible from below the ceiling. Power Factor: Total Harmonic Distortion (THD): <20%. Expected driver lifetime: 100,000 hours. electrical: Optional emergency to generator/inverter wiring, internal generator transfer switch, nightlight wiring, step-dimming driver (B and V outputs only), backup battery. 2e PeNDaNT: A factory-choice low-profile backup battery is available (8' minimum luminaire length). Backup batteries deliver 1600 lumens. A 4' section will be illuminated in emergency mode. 3e PeNDaNT: A factory-choice low-profile backup battery is available (8' minimum luminaire length). Backup batteries deliver 1400 lumens. A 4' section will be illuminated in emergency mode. 4e PeNDaNT: A factory-choice low-profile backup battery is available (8' minimum luminaire length). Backup batteries deliver 1400 lumens. A 4' section will be illuminated in emergency mode. integrated SeNSORS: Integrated PIR (Passive Infrared) occupancy and/or daylight sensors available. Refer to Occupancy Sensor and Daylight Sensor tech sheets for more info. MOuNTiNG: 50" Fully Adjustable (FA) plated steel aircraft cable with safety stop hardware standard. Contact factory for additional lengths up to 150". Optional semi-adjustable Aircraft Cable (AC) (± 0.5") in lengths of 12", 15", 18", 21", 2, 27", 30", 36". finishes: Finelite Signal White powder coat standard. Optional Adders: 185 nonmetallic RAL colors. feed: Standard with one 18-gauge/5-conductor single-circuit feed. 14-gauge feed used when luminaire current exceeds 5 amps. LeNGTHS: Standard 4' and 8' section lengths can be combined to make longer runs. Contact factory additional lengths. WeiGHT: With Flat Endcaps (FE) lb/ft; with Curved Endcaps (CE) 2.6 to 3.6 lb/ft. WaRRaNTY: 10-year performance-based warranty on all standard components. Optional accessories such as emergency battery packs are covered by their individual manufacturer warranties. PHOTOMeTRY 2e Open - 4' Luminaire* PHOTOMeTRY 3e Open - 4' Luminaire* PHOTOMeTRY 4e Distribution Ratio - 4' Luminaire* 10U90D 20U80D 30U70D 40U60D TDO Series 12-LED-ID-DCO-2e-V-835-OPeN Distribution: 74% Up / 26% Down Efficacy: 128 lumens per watt Total luminaire output: 4784 lumens (1196 lumens/foot) 37.3 watts (9.3 watts/foot) ITL LM79 Report Series 12-LED-ID-DCO-3e-V-V-835-OPeN Distribution: 71% Up / 29% Down Efficacy: 124 lumens per watt Total luminaire output: 7069 lumens (1767 lumens/foot) 57.0 watts (14.3 watts/foot) CCT: 3500K ITL LM79 Report Series 12-LED-ID-DCO-4e-H u70D Efficacy: 113 lumens per watt Total luminaire output: 5000 lumens (1250 lumens/foot) 44.3 watts (11.1 watts/foot) Source Report (Family Correlation) *For full Photometry details see Series 12 technical sheet. W W W. F I N E L I T E. C O M 125

89 Series 12 LED WM Feature Spotlight Standoff Mount (Optional) with Curved endcap (Optional) flat endcap Mid-Power LeDs Mid-power LEDs run cool. Expected lifetime: L90 at 100,000+ hours. L70 at 200,000+ hours. LiGHT engine OPTiC & DiSTRiBuTiON RaTiO OPTiONS 2 Engine Open Frosted Top Optic (FTO) Clear Top Optic (CTO) 2-1/2" 6-5/16" 126 W W W. F I N E L I T E. C O M

90 Series 12 LED WM Specifications CONSTRuCTiON: Body is 20-gauge die-formed steel with an 18-gauge dieformed internal joiner system. Plug-together wiring standard. All components are hard-tooled to tolerances of ±0.010". endcaps: The Flat Endcap (FE) is standard and made of 20-gauge die-formed steel adding 1/8" at each end. The optional Curved Endcap (CE) is an aluminum die-cast endcap with a 1/8" reveal adding 5" at each end. OPTiCS: Open Standard FTO Frosted Top Optic CTO Clear Top Optic LiGHT OuTPuT: Four lumen packages available, Standard (S), Boosted Standard (B), High (H), and Very High (V). A separate chart summarizes lumen distribution and wattage. Light engines are replaceable. LuMeN MaiNTeNaNCe: 90% of initial light output (L90) at 100,000+ hours; 70% of initial light output (L70) at 200,000+ hours. DRiVeR: Replaceable 120V/277V Constant Current Reduction dimming driver standard. Can be wired dimming or non-dimming. 0-10V dimming controls with a range of 10%-100%. Dimming to 1% available; consult factory. Driver is fully accessible from below the ceiling. Power Factor: Total Harmonic Distortion (THD): <20%. Expected driver lifetime: 100,000 hours. electrical: Optional emergency to generator/inverter wiring, internal generator transfer switch, nightlight wiring, step-dimming driver, backup battery. Optional Chicago Plenum available. A factory-choice low-profile backup battery is available (8' minimum luminaire length). Backup batteries deliver 1600 lumens. A 4' section will be illuminated in emergency mode. integrated SeNSORS: Integrated PIR (Passive Infrared) occupancy and/or daylight sensors available. Refer to Occupancy Sensor and Daylight Sensor tech sheets for more info. MOuNTiNG: Standard Surface Mount (SUR) - luminaire is bolted directly into existing wall studs. Optional Standoff Mount (SO) - luminaire hangs from tapered mounting bracket fastened to wall at luminaire ends and joints; standoff bracket measures 4.5" wide, 6" tall, and 1/2" deep; luminaire hangs 1/2" from wall; feed goes through mount to vertical J-box. Optional Mounting Bracket (MB) - luminaire hangs from bracket fastened directly to wall; mounting bracket available in 4' and 8' lengths; luminaire hangs 1/2" from wall; mounting bracket is concealed behind luminaire. finishes: Finelite Signal White powder coat standard. Optional Adders: 185 non-metallic RAL colors. feed: Standard with one 18-gauge/5-conductor single-circuit feed. 14-gauge feed used when luminaire current exceeds 5 amps. LeNGTHS: Standard 4' and 8' section lengths can be combined to make longer runs. Contact factory additional lengths. WeiGHT: With Flat Endcaps (FE) lb/ft; with Curved Endcaps (CE) 2.6 to 3.6 lb/ft. DLC QuaLifieD: Configurations of this product are listed on the DLC Qualified Products List (QPL). WaRRaNTY: 10-year performance-based warranty on all standard components. Optional accessories such as emergency battery packs are covered by their individual manufacturer warranties. PHOTOMeTRY 2e Open - 4' Luminaire Series 12-LED-WM-ID-DCO-2e-V-835-OPeN Distribution: 75% Up / 25% Down Efficacy: 124 lumens per watt Total luminaire output: 4624 lumens (1156 lumens/foot) 37.2 watts (9.3 watts/foot) CCT: 3500K ITL LM79 Report CANDELA DISTRIBUTION Flux *For full Photometry details see Series 12 technical sheet. W W W. F I N E L I T E. C O M 127

91 Project: Moss Adams Location: La Jolla, CA Architect: ID Studios, Inc. Product: S12-LED 2E Representatives: OCS Lighting & Control, Inc. 128 W W W. F I N E L I T E. C O M

92 Series 12 LED Ordering Guide S12 LED-ID - DCO - 8' - 2E - S U90D - 120V - SC - FA - EE - C1 - OBO Finelite Series 12 LeD (id - Indirect/Direct) 1 Finelite Series 12 LeD WM (id - Indirect/Direct) 2 Shielding (DCO - Diffuse Center, WCB - White Cross Blade, PLV - Parabolic Louver) 3E: / Length (4', 8', multiples standard) Light Engine System (2e - 2 Light Engine) (3e - 3 Light Engine) (4e - 4 Light Engine) Output 2E (S - Standard, B - Boosted Standard, H - High, V - Very High) 3E Up (S - Standard, B - Boosted Standard, H - High, V - Very High) 3E DN (S - Standard, B - Boosted Standard, H - High, V - Very High) 4E (S lumens, B lumens, H lumens) LED CRI/CCT ( CRI min, 3000K; CRI min, 3500K; CRI min, 4000K; CRI min, 3000K; CRI min, 3500K; CRI min, 4000K) Optic or Distribution Ratio 2E: OPeN - standard 2E WM: OPeN 3E: OPeN 4E: TDO fto - Frosted Top Optic fto fto 10u90D CTO - Clear Top Optic CTO CTO 20u80D TDO - Total Direct Optic 30u70D 10u90D 40u60D 20u80D 30u70D Voltage (120V, 277V) Circuiting (SC - Single Circuit) 3 Pendant Mount (fa - Fully Adjustable (standard), ac - semi-adjustable) Wall Mount (SuR - Surface Mount (standard), SO - Standoff, MB - Mounting Bracket) Endcap (fe - Flat Endcap (standard), Ce - Curved Endcap) Ceiling Type (C1-1" T-Bar, C2-9/16" T-Bar, C3 - slot grid, C4 - hard ceiling) Integrated Sensors (OBD - Daylight, OBO - Occupancy) 1 Indirect luminaires available on 2E and 3E 2 Available on 2E only 3 Contact factory for switching options Note: For Tunable White please see Tunable White technical sheet. W W W. F I N E L I T E. C O M 129

93 Series 18 Series 18 LED 2-Engine is a slim profile pendant luminaire. With a x 2.25" cross-section, this luminaire integrates exceptionally well into low ceiling environments. Available in Tunable White. Series 18 is also available in fluorescent. 10 Industry Best Year LED Warranty 130 W W W. F I N E L I T E. C O M

94 W W W. F I N E L I T E. C O M 131

95 Series 18 LED Feature Spotlight 2-1/ Specifications CONSTRuCTiON: Body is 20-gauge die-formed steel with an 18-gauge dieformed internal joiner system. Plug-together wiring standard. All components are hard-tooled to tolerances of ± 1/100". endcaps: The Flat Endcap (FE) is standard and made of 20-gauge die-formed steel adding 1/8" at each end. The optional Extended Endcap (EE) is an aluminum die-cast endcap and adds 9/16" at each end. RefLeCTORS: Die-formed 24-gauge cold-rolled steel reflectors finished in 96LG High Reflectance white power coat paint. uplight OPTiCS: The 2E optical system is open, standard. Optional Frosted Top Optic (FTO) and Clear Top Optic (CTO), available. SHieLDiNG: Diffusers are 73% transmissive with 99% diffusion. Luminaires are available with two distinct shielding options: Optional Extended Endcap Optional flexible Mounting Bracket: The flexible Mounting Bracket (FM) adjusts along the length of the luminaire to accomodate existing mounting points. electrical: Optional emergency to generator/inverter wiring, internal generator transfer switch, nightlight wiring, step-dimming driver, backup battery. Optional Chicago Plenum available. A factory-choice low-profile backup battery is available (8' minimum luminaire length). Backup batteries deliver 1600 lumens. A 4' section will be illuminated in emergency mode. integrated SeNSORS: Daylight sensors and Integrated PIR (Passive Infrared) occupancy sensors available. Refer to Occupancy Sensor and Daylight Sensor tech sheets for more info. MOuNTiNG: 50" Fully Adjustable (FA) plated steel aircraft cable with safety stop hardware standard. Contact factory for additional lengths up to 150". Optional semi-adjustable Aircraft Cable (AC) (± 1/2") in lengths of 12", 15", 18", 21", 2, 27", 30", 36". feed: Standard with one 18-gauge/5-conductor single circuit feed. 14-gauge feed used when luminaire current exceeds 5 amps. Continuous Shielding (CS) is standard with a maximum 8' length. The visible diffuse area is 7' 9" centered on an 8' housing. CS SG Segmented Shielding (SG) option available. finishes: Finelite Signal White powder coat standard. Optional Adders: 185 non-metallic RAL colors. LeNGTHS: Standard 4' and 8' section lengths can be combined to make longer runs. LiGHT OuTPuT: Four lumen packages available, (S) - Standard, (B) - Boosted Standard, (H) - High, and (V) - Very High. A separate chart summarizes lumen distribution and wattage. Light engines are replaceable. LuMeN MaiNTeNaNCe: 90% of initial light output (L90) at 100,000+ hours; 70% of initial light output (L70) at 200,000+ hours. DRiVeR: Replaceable 120V/277V Constant Current Reduction dimming driver standard. Can be wired dimming or non-dimming. 0-10V dimming controls with a range of 10%-100%. Dimming to 1% available; consult factory. Driver is fully accessible from below the ceiling. Power Factor: Total Harmonic Distortion (THD) <20%. Expected driver lifetime: 100,000 hours. WeiGHT: 2.5 lb/ft. DLC QuaLifieD: Configurations of this product are listed on the DLC Qualified Products List (QPL). WaRRaNTY: 10-year performance-based warranty on all standard components. Optional accessories such as emergency battery packs are covered by their individual manufacturer warranties. PHOTOMeTRY - 4' Luminaire S18-LED-ID-DCO-Open Very High Output Efficacy: (lumens per watt): 119 Total luminaire output: 4416 lumens (1104 lumens/foot) 38.1 watts (9.3 watts/foot) Peak Candela Value: 125º CRI: 80 CCT: 3500K ITL LM79 Report: PHOTOMeTRY - 4' Luminaire S18-LED-ID-DCO-FTO Very High Output Efficacy: (lumens per watt): 103 Total luminaire output: 3831 lumens (958 lumens/foot) 38.1 watts (9.3 watts/foot) Peak Candela Value: 135º CCT: 3500K ITL LM79 Report CANDELA DISTRIBUTION Flux CANDELA DISTRIBUTION Flux W W W. F I N E L I T E. C O M

96 Series 18 LED WM Feature Spotlight WALL WALL 2-1/ Specifications CONSTRuCTiON: Body is 20-gauge die-formed steel with an 18-gauge dieformed internal joiner system. Plug-together wiring standard. All components are hard-tooled to tolerances of ±1/100". endcaps: The Flat Endcap (FE) is standard and made of 20-gauge die-formed steel adding 1/8" at each end. The optional Extended Endcap (EE) is an aluminum die-cast endcap and adds 9/16" at each end. RefLeCTORS: Die-formed 24-gauge cold-rolled steel reflectors finished in 96LG High Reflectance white power coat paint. uplight OPTiCS: The 2E optical system is open, standard. Optional Frosted Top Optic (FTO) and Clear Top Optic (CTO), available. SHieLDiNG: Diffusers are 73% transmissive with 99% diffusion. Luminaires are available with two distinct shielding options: CS SG Continuous Shielding (CS) is standard with a maximum 8' length. The visible diffuse area is 7' 9" centered on an 8' housing. Segmented Shielding (SG) option available. LiGHT OuTPuT: Four lumen packages available, Standard (S), Boosted Standard (B), High (H), and Very High (V). A separate chart summarizes lumen distribution and wattage. Light engines are replaceable. LuMeN MaiNTeNaNCe: 90% of initial light output (L90) at 100,000+ hours; 70% of initial light output (L70) at 200,000+ hours. DRiVeR: Replaceable 120V/277V Constant Current Reduction dimming driver standard. Can be wired dimming or non-dimming. 0-10V dimming controls with a range of 10%-100%. Dimming to 1% available; consult factory. Driver is fully accessible from below the ceiling. Power Factor: Total Harmonic PHOTOMeTRY - 4' Luminaire S18-LED-ID-DCO-Open 1091 Very High Output Efficacy: (lumens per watt): Total luminaire output: 4416 lumens (1104 lumens/foot) watts (9.3 watts/foot) 273 Peak Candela Value: 125º CRI: 80 CCT: 3500K ITL LM79 Report: Optional Extended Endcap Optional flexible Mounting Bracket: The flexible Mounting Bracket (FM) adjusts along the length of the luminaire to accomodate existing mounting points. WALL Distortion (THD) <20%. Expected driver lifetime: 100,000 hours. electrical: Optional emergency to generator/inverter wiring, internal generator transfer switch, nightlight wiring, step-dimming driver, backup battery. Optional Chicago Plenum available. A factory-choice low-profile backup battery is available (8' minimum luminaire length). Backup batteries deliver 1600 lumens. A 4' section will be illuminated in emergency mode. integrated SeNSORS: Daylight sensors and Integrated PIR (Passive Infrared) occupancy sensors available. Refer to Occupancy Sensor and Daylight Sensor tech sheets for more info. MOuNTiNG: Surface Mount (SUR) is standard with the luminaire bolting directly into existing wall studs. Optional Mounting Brackets (MB) in 4' and 8' lengths attach to the wall and the luminaire hangs on the bracket 1/2" off the wall. The mounting bracket is concealed behind the luminaire. feed: Standard with one 18-gauge/5-conductor single circuit feed. 14-gauge feed used when luminaire current exceeds 5 amps. finishes: Finelite Signal White powder coat standard. Optional Adders: 185 non-metallic RAL colors. LeNGTHS: Standard 4' and 8' section lengths can be combined to make longer runs. WeiGHT: 2.5 lb/ft. DLC QuaLifieD: Configurations of this product are listed on the DLC Qualified Products List (QPL). WaRRaNTY: 10-year performance-based warranty on all standard components. Optional accessories such as emergency battery packs are covered by their individual manufacturer warranties. PHOTOMeTRY - 4' Luminaire S18-LED-ID-DCO-FTO 1093 Very High Output (FTO) 820 Efficacy: (lumens per watt): 103 Total luminaire output: 3831 lumens (958 lumens/foot) watts (9.3 watts/foot) 273 Peak Candela Value: 135º CCT: 3500K ITL LM79 Report (Family Correlation) CANDELA DISTRIBUTION Flux CANDELA DISTRIBUTION Flux W W W. F I N E L I T E. C O M 133

97 Project: VMware Location: Coppell, TX Architect: David Whitney Architects Product: Series 18 Representative: Associated Lighting Representatives 134 W W W. F I N E L I T E. C O M

98 Series 18 LED Ordering Guide Finelite Series 18 LeD (id - Indirect/Direct) Finelite Series 18 LeD WM (id - Indirect/Direct) Shielding (CS - Continuous Shielding 1, SG - Segmented Shielding) Length (4', 8', multiples standard) 2 Light Engine System (2e - 2 Light Engine) Light Output (S - Standard, B - Boosted Standard, H - High, V - Very High) LED CRI/CCT ( CRI min, 3000K; CRI min, 3500K; CRI min, 4000K; CRI min, 3000K; CRI min, 3500K; CRI min, 4000K) Uplight Optic Option (O - Open (standard), fto - Frosted Top Optic, CTO - Clear Top Optic Circuiting (SC - Single circuit) 3 Voltage (120V, 277V) Mounting (Pendant: fa - Fully Adjustable; ac - Semi-Adjustable;, fm - Flexible Mounting) (Wall Mount: SuR - Surface Mount; MB - Mounting Bracket ) Endcap (fe - Flat, ee - Extended) Ceiling type (C1-1" T-bar, C2-9/16" T-bar, C3 - Slot Grid, C4 - Hard Ceiling) Integrated Sensor (OBD - Daylight, OBO - Occupancy) S18 LED ID - CS - 32' - 2E - S FTO - SC - 120V - FA - EE - C1 - OBD 1 Continuous shielding is standard with a maximum 8' length. Visible diffuse area is 7'9' centered on a 8' housing. Available with LED only. 2 Contact factory for 6' lengths. 3 Contact factory for switching options. W W W. F I N E L I T E. C O M 135

99 Series 17 Light up corridors, stairwells and reception areas without glare and in high style with Series 17 LED ADA Wall Mount luminaires. Choose from Angled Curved Fascia (ACF) or Vertical Curved Fascia (VCF) in solid or perforated design. Series 17 LED uses mid-powered LEDs for long life and evenly distributed illumination. 10 Industry Best Year LED Warranty 136 W W W. F I N E L I T E. C O M

100 Series 17 LED 3-15/16" 3-15/16" Feature Spotlight 3-13/16" 4-11/16" 3-3/8" 4-3/16" Each unit is available with an optional luminaire integrated ultrasonic occupancy sensor. VCF - Vertical Curved Fascia Perforated Specifications ACF - Angled Curved Fascia Solid integrated Sensors CONSTRuCTiON: Luminaire channel is 6063-T6 extruded aluminum. Fascia covers are die-formed 20-gauge steel. Mounting clips are constructed from 22-gauge die-formed steel. All components are hard-tooled to tolerances of ± 0.010". endcaps: Flat endcap, 14-gauge die-formed steel, adds 1/8" to each end. RefLeCTORS: 96W standard reflector, die-formed painted steel, 96% reflectance white finish. Virgin acrylic UV stabilized lensed diffuser behind perforated fascia is standard. DiffuSeRS: Standard with top 3/32" and bottom 1/16" frosted acrylic diffusers. LiGHT OuTPuT: Four lumen packages available, Standard (S), Boosted Standard (B), High (H), and Very High (V). A separate chart summarizes lumen distribution and wattage. Light engines are replaceable. LuMeN MaiNTeNaNCe: 90% of initial light output (L90) at 100,000+ hours; 70% of initial light output (L70) at 200,000+ hours. DRiVeR: Replaceable 120V/277V Constant Current Reduction dimming driver standard. Can be wired dimming or non-dimming. 0-10V dimming controls with a range of 10%- 100%. Dimming to 1% available; consult factory. Driver is fully accessible from below the ceiling. Power Factor: Total Harmonic Distortion (THD) <20%. Step-dimming driver (limited programable outputs. Contact Factory). Expected driver lifetime: 100,000 hours. PHOTOMeTRY - 4' Luminaire S17-LED-ACF-SF Very High Output Efficacy: 72 lumens per watt Total luminaire output: 2673 lumens (668 lumens/foot) 37.1 watts (9.3 watts/foot) Peak Candela Value: 165º CRI: 80 CCT: 3500K ITL LM79 Report electrical: Optional emergency to generator/inverter wiring, internal generator transfer switch, nightlight wiring, backup battery. Factory-choice, lowprofile, battery backup delivers 800 lumens (ACF) or 1400 (VCF). Minimum luminaire length for battery pack: 8'. The downlight will always be illuminated in the 4' section. integrated SeNSORS: Available with integrated ultrasonic occupancy sensors. Not available on 2' luminaires. MOuNTiNG: Standard with mounting clips to the wall and not visible from normal viewing angles once installed. One mounting clip is provided for every 16" of luminaire for a secure connection to the wall. Luminaire is snapped into place on the mounting clips and secured using locking screws. feed: Standard with one 18-gauge/5-conductor single-circuit feed. 14-gauge feed used when luminaire current exceeds 5 amps. Optional 6' flex conduit whips available. finishes: Finelite Signal White is standard. Optional adders: 185 finishes available from RAL color chart. LeNGTHS: Modular section lengths of 2', 3', 4' and 8' section lengths can be combined to make longer runs. WeiGHT: 2 lb/ft. WaRRaNTY: 10-year performance-based warranty on all standard components. Optional accessories such as emergency battery packs are covered by their individual manufacturer warranties. PHOTOMeTRY - 4' Luminaire S17-LED-VCF-SF Very High Output Efficacy: 88 lumens per watt Total luminaire output: 3222 lumens (806 lumens/foot) 36.8 watts (9.2 watts/foot) Peak Candela Value: 15º CCT: 3500K ITL LM79 Report: ITL LM79 Report CANDELA DISTRIBUTION Flux CANDELA DISTRIBUTION Flux W W W. F I N E L I T E. C O M 137

101 138 W W W. F I N E L I T E. C O M

102 Series 17 LED angled Curved fascia - Solid Vertical Curved fascia - Perforated Ordering Guide S17 LED - VCF - PF - 4' - S V - SC - OBO Finelite Series 17 LeD Shape (VCf - Vertical, acf - Angled) Fascia (Pf - Perforated, Sf - Solid) Length (2', 3', 4', 8', multiples standard) Light Output (S - Standard, B - Boosted Standard, H - High, V - Very High) LED CRI/CCT ( CRI min, 3000K; CRI min, 3500K; CRI min, 4000K; CRI min, 3000K; CRI min, 3500K; CRI min, 4000K) Voltage (120V, 277V) Circuiting (SC - Single circuit) Integrated Sensor (OBO - Occupancy Sensor) 1 1 Not available on 2' luminaires. W W W. F I N E L I T E. C O M 139

103 Series 11 Finelite Series 11 LED is a unique high performance luminaire, perfect for cove ceilings where soft, even illumination is needed. Series 11 is available in three LED color temperatures 3000K, 3500K, and 4000K. Series 11 is RoHS compliant. 10 Industry Best Year LED Warranty Micro Profile and Micro Flex 140 W W W. F I N E L I T E. C O M

104 Project: Los Gatos Public Library Location: Los Gatos, California Architect: Noll & Tam Architects Lighting Designer: Illuminosa Product: Series 11 Representatives: Associated Lighting Representatives W W W. F I N E L I T E. C O M 141

105 Series 11 LED Standard 7-13/16" 2-11/16" Feature Spotlight DiffuSeR Series 11 LED is standard with a frosted acrylic diffuser providing a smooth distribution of light. 5-3/8" Specifications CONSTRuCTiON: Body is formed from 20-gauge sheet steel. All components are hard-tooled to a tolerance of ±0.010 ". CORNeR: Optional corner harness, 1/2" diameter flex conduit, 1 long. Contact factory. RefLeCTORS: Die-formed 20-gauge cold-rolled steel reflectors finished in 96LG High Reflectance white power coat paint. LiGHT OuTPuT: Four lumen packages available, Standard (S), Boosted Standard (B), High (H), and Very High (V). A separate chart summarizes lumen distribution and wattage. Light engines are replaceable. LuMeN MaiNTeNaNCe: 90% of initial light output (L90) at 100,000+ hours; 70% of initial light output (L70) at 200,000+ hours. DRiVeR: Replaceable 120V/277V Constant Current Reduction dimming driver standard. Can be wired dimming or non-dimming. 0-10V dimming controls with a range of 10%-100%. Dimming to 1% available; consult factory. Driver is fully accessible from below the ceiling. Power Factor: Total Harmonic Diffuser - Frosted Distortion (THD) <20%. Expected driver lifetime: 100,000 hours. electrical: Optional emergency to generator/inverter wiring, internal generator transfer switch, nightlight wiring, step-dimming driver, backup battery. Factory-choice low-profile backup battery available. 8' minimum luminaire length for low profile battery pack. Backup batteries deliver 1800 lumens. A 4' section will be illuminated in emergency mode. MOuNTiNG: Luminaire mounts directly to architectural cove. feed: A standard 14-gauge wire feed extends from the back of the luminaire. WeiGHT: 2.5 lb/ft. WaRRaNTY: 10-year performance-based warranty on all standard components. Optional accessories such as emergency battery packs are covered by their individual manufacturer warranties. PHOTOMeTRY 4' Luminaire Series 11 LED-V-835 Very High Output EfficacY: 124 lumens per watt Total luminaire output: 4584 lumens (1146 lumens/foot) 37 (9.3 watts/foot) Peak Candela Value: 165 CCT: 3500K ITL LM79 Report CANDELA DISTRIBUTION Flux Refer to the Finelite website for additional photometry and product information. 142 W W W. F I N E L I T E. C O M

106 Series 11 LED Standard Ordering Guide S11 LED - 32' - S SC - 96W - 120V Finelite Series 11 LeD Standard Length (2', 3', 4', 8', multiples standard) Light Output (S - Standard, B - Boosted Standard, H - High, V - Very High) LED CRI/CCT ( CRI min, 3000K; CRI min, 3500K; CRI min, 4000K; CRI min, 3000K; CRI min, 3500K; CRI min, 4000K) Circuiting (SC - Single circuit) 1 Reflector System (96W) Voltage (120V, 277V) 1 Contact factory for switching options W W W. F I N E L I T E. C O M 143

107 Series 11 LED Micro Profile Cove Feature Spotlight 1-3/ 1-1/2" Specifications 12" Max Telescoping Option Mounting Option CONSTRuCTiON: Body is formed from 20-gauge sheet steel. All components are hard-tooled to a tolerance of ± CORNeR: Optional corner harness, 1/2" diameter flex conduit, 1 long. Contact factory. RefLeCTORS: Die-formed 24-gauge cold-rolled steel reflectors finished in 96LG High Reflectance white power coat paint. LiGHT OuTPuT: Four lumen packages available, Standard (S), Boosted Standard (B), High (H), and Very High (V). A separate chart summarizes lumen distribution and wattage. Light engines are replaceable. LuMeN MaiNTeNaNCe: 90% of initial light output (L90) at 100,000+ hours; 70% of initial light output (L70) at 200,000+ hours. DRiVeR: Replaceable 120V/277V Constant Current Reduction dimming driver standard. Can be wired dimming or non-dimming. 0-10V dimming controls with a range of 10%-100%. Dimming to 1% available; consult factory. Driver is fully accessible from below the ceiling. Power Factor: Total Harmonic Distortion (THD) <20%. Expected driver lifetime: 100,000 hours. electrical: Optional emergency to generator/inverter wiring, internal generator transfer switch, nightlight wiring, step-dimming driver, backup battery. Factory-choice low-profile backup battery available. 8' minimum luminaire length for low profile battery pack. Backup batteries deliver 1800 lumens. Half of a 4--' section will be illuminated in emergency mode. MOuNTiNG: Luminaire mounts directly to architectural cove. feed: A standard 14-gauge wire feed extends from the back of each driver segment. LeNGTHS: Standard 2', 3', 4', and 8' section lengths can be combined to make longer runs. The telescoping option adds 1" to the minimum length of the luminaire. WeiGHT: 1.5 lb/ft. WaRRaNTY: 10-year performance-based warranty on all standard components. Optional accessories such as emergency battery packs are covered by their individual manufacturer warranties. PHOTOMeTRY 4' Luminaire Series 11 LED Micro Profile Cove Very High Output Efficacy: 120 lumens per watt Total luminaire output: 2355 lumens (588.8 lumens/foot) 19.6 (4.9 watts/foot) Peak Candela Value: 145 CCT: 3500K ITL LM79 Report CANDELA DISTRIBUTION Flux Refer to the Finelite website for additional photometry and product information. 144 W W W. F I N E L I T E. C O M

108 Series 11 LED Micro Profile Cove Ordering Guide S11 LED-MP - 32' - S SC - 96W - 120V - TXL Finelite Series 11 Micro Profile (MP) Length (2', 3', 4', 8', multiples standard) Light Output (S - Standard, B - Boosted Standard, H - High, V - Very High) LED CRI/CCT ( CRI min, 3000K; CRI min, 3500K; CRI min, 4000K; CRI min, 3000K; CRI min, 3500K; CRI min, 4000K) Circuiting (SC - Single circuit) 1 Reflector System (96W) Voltage (120V, 277V) Special Option (TXL - Telescoping Extra Length, 12 Max) 2 1 Contact factory for switching options 2 Leave blank if telescoping section is not required. The last segment in runs with TXL will include the adjustable section, unless otherwise specified. W W W. F I N E L I T E. C O M 145

109 Series 11 LED Micro Flex Cove Feature Spotlight 1-3/ Driver 2-1/ 1-5/8" Series 11 LED Micro Flex Cove luminaires are ideal for curved cove structures. The 12" segments are joined using quick-connect low-voltage cables that allow flexing in any direction. Bracket Curved Coves Specifications CONSTRuCTiON: Body is formed from 20-gauge sheet steel. All components are hard-tooled to a tolerance of ±0.010". RefLeCTORS: Die-formed 24-gauge cold-rolled steel reflectors finished in 96LG High Reflectance white power coat paint (96W). LiGHT OuTPuT: Four lumen packages available, Standard (S), Boosted Standard (B), High (H), and Very High (V). A separate chart summarizes lumen distribution and wattage. Light engines are replaceable. LuMeN MaiNTeNaNCe: 90% of initial light output (L90) at 100,000+ hours; 70% of initial light output (L70) at 200,000+ hours. DRiVeR: Replaceable 120V/277V Constant Current Reduction dimming driver standard. Can be wired dimming or non-dimming. 0-10V dimming controls with a range of 10%-100%. Dimming to 1% available; consult factory. Driver is fully accessible from below the ceiling. Power Factor: Total Harmonic Distortion (THD) <20%. Expected driver lifetime: 100,000 hours. electrical: Optional emergency to generator/inverter wiring, internal generator transfer switch, nightlight wiring, step-dimming driver. Backup battery not available. MOuNTiNG: Luminaire mounts directly to architectural cove. feed: A standard 14-gauge wire feed extends from the back of each driver segment. LeNGTHS: Standard 2', 3', 4', and 8' section lengths can be combined to make longer runs. 12" segments are joined using quick-connect low-voltage cables that allow flexing in any direction. It has a minimum 2' length and requires a driver for every 8 total segments. WeiGHT: 1.02 lb/ft. WaRRaNTY: 10-year performance-based warranty on all standard components. Optional accessories such as emergency battery packs are covered by their individual manufacturer warranties. PHOTOMeTRY 4' Luminaire Series 11 LED Micro Flex Cove Very High Output Efficacy: 118 lumens per watt Total luminaire output: 2310 lumens (578 lumens/foot) 19.6 (4.9 watts/foot) Peak Candela Value: 155 CCT: 3500K ITL LM79 Report CANDELA DISTRIBUTION Flux Refer to the Finelite website for additional photometry and product information. 146 W W W. F I N E L I T E. C O M

110 Series 11 LED Micro Flex Cove Ordering Guide S11 LED-MF - 32' - S SC - 96W - 120V Finelite Series 11 Micro flex (Mf) Length (2', 3', 4', 8', multiples standard) Light Output (S - Standard, B - Boosted Standard, H - High, V - Very High) LED CRI/CCT ( CRI min, 3000K; CRI min, 3500K; CRI min, 4000K; CRI min, 3000K; CRI min, 3500K; CRI min, 4000K) Circuiting (SC - Single circuit) 1 Reflector System (96W) Voltage (120V, 277V) 1 Contact factory for switching options W W W. F I N E L I T E. C O M 147

111 Curve by Finelite The Curve by Finelite is an ENERGY STAR qualified LED desk lamp that won Best in Class in the DOE LED Next Generation Luminaire (NGL) design competition as the highest ranked entry and will be featured in the 2010 IES Progress Report. Delivering 49 lumens per watt, full range QuickTouch dimming, and a field-replaceable LED module, the Curve delivers breakthrough performance backed by LM-79 testing, LM-80 data, and a 5-year, worry-free warranty. 148 W W W. F I N E L I T E. C O M

112 Location: San Francisco, CA Product: PLS/Curve LED desk lamp W W W. F I N E L I T E. C O M 149

113 Curve by Finelite Dimensions / Lamping Feature Spotlight Max Height: 20" Replaceable LeD Module LED modules are easily replaced. State of the art high performance LED array. Contact factory for current specification. 12" QuickTouch Dimming Dims to 5% of light output. Designed without a hard stop for durability. Pivot Point Max Extension: 19" Specifications ENERGY STAR qualified with 8W power supply Buy American Act of 2009 Compliant Field-replaceable LED module Efficacy: 49 lumens per watt Light Output: 363 total lumens Color Temperature: 3500K Color Rendering: 82 CRI L 70 : Rated for 100,000 hours to 70% of initial lumens 1 Maximum Case Temperature: (Tc) 56.1ºC Power Consumption: 8W max 1 L 70 lifetime is estimated by the LED manufacturer based on independent testing of the Curve luminaire. State of the art high performance LED array. Contact factory for current specification. QuickTouch dimming to 5% of full light output LM-79 tested and LM-80 data is available Complies with FCC requirements for commercial and residential use Compatible with Personal Lighting System (PLS) End of life statement: Curve is 97% recyclable at the end of its useful life RoHS compliant PS Photometric Performance Forward throw beam comfortably illuminates the entire task area with a single desk lamp. Mounting Options Weighted Base: 5-1/2" x 5-1/2" x 3/ with integral pin and protective feet. ENERGY STAR Qualified Lamp head is 16" above desk surface at full light output. Download LM-79 test report at Desk Clamp: Zero-clearance clamp affixes to back of desk without removing desk from cube for 1" - 2-1/2" thick desk. Mounting Plate: Flush mounting on table or work surface (1" - 1-1/2") thick. The Curve desk lamp is only ENERGY STAR qualified with the 8W power supply. 8W Power Supply 8W The Curve desk lamp power supply draws no power during off-state. Refer to the Finelite website for additional photometry and product information. 150 W W W. F I N E L I T E. C O M

114 Curve by Finelite Project: SHI Location: Somerset, NJ Architect: Cornerstone Architectural Group. LLC Product: PLS/Curve LED desk lamp Representative: Liberty Lighting Ordering Guide DL-C S WBC-S PS-8W ES 1 Lamp (DL-C) Finish (S - Silver standard. 188 RAL colors available) Base (WBC-S - Weighted, CL-S - Clamp, MP-S - Mounting Plate, Other - Consult Factory) Power Supply (PS-8W, PS-21W, PS-60W) ENERGY STAR (es 1 ) 1 ENERGY STAR qualified with 8W power supply (PS8W). W W W. F I N E L I T E. C O M 151

115 Reach by Finelite The Reach by Finelite is an ENERGY STAR qualified LED desk lamp. Delivering up to 49 lumens per watt, full range QuickTouch dimming, and a field-replaceable LED module, the Reach delivers breakthrough performance backed by LM-79 testing, LM-80 data, and a 5-year, worry-free warranty. 152 W W W. F I N E L I T E. C O M

116 Project: Finelite, Inc. Location: Union City, CA Product: PLS/Reach LED desk lamp W W W. F I N E L I T E. C O M 153

117 Reach by Finelite Dimensions / Lamping Feature Spotlight 18" 18" 12" Replaceable LeD Module LED modules are easily replaced. State of the art high performance LED array. Contact factory for current specification. 12" QuickTouch Dimming Dims to 5% of light output. Designed without a hard stop for durability. Specifications ENERGY STAR qualified with 8W power supply Buy American Act of 2009 Compliant Field-replaceable LED module Efficacy (Lumens per Watt): Velo: 49.5 / Viper: 47.9 Light Output (Lumens): Velo: 371 / Viper: 359 Color Temperature: 3500K Color Rendering (CRI): Velo: 83 / Viper: 82 L 70 : Rated for 100,000 hours to 70% of initial lumens 1 Max Case Temperature: (Tc): Velo: 55.7ºC / 61.3ºC Power Consumption: 8W max State of the art high performance LED array. Contact factory for current specification. QuickTouch dimming to 5% of full light output LM-79 tested and LM-80 data is available Complies with FCC requirements for commercial and residential use Compatible with Personal Lighting System (PLS) End of life statement: Reach is 96% recyclable at the end of its useful life RoHS compliant PS 1 L 70 lifetime is estimated by the LED manufacturer based on independent testing of the Curve luminaire. Photometric Performance Luminaire Style Options ENERGY STAR Qualified Forward throw beam comfortably illuminates the entire task area with a single desk lamp. Velo Reach comes in two unique head designs. Velo and Viper. Both feature the same optical performance. 8W 1 70fc 50fc 30fc 1 10fc 2 Viper Mounting Options Desk Clamp The desk clamp is standard on Reach and secures to desks up to 2-1/ thick. The Reach desk lamp is only ENERGY STAR qualified with the 8W power supply. 8W Power Supply 2 Lamp head is 16" above desk surface at full light output. Download LM-79 test report at Refer to the Finelite website for additional photometry and product information. The Reach desk lamp power supply draws no power during off-state. 154 W W W. F I N E L I T E. C O M

118 Reach by Finelite Location: San Francisco, CA Product: PLS/Reach LED desk lamp Ordering Guide DL-R VE 12 B PS-8W ES Lamp (DL-R) Head Design (Ve - Velo, Vi - Viper) Arm Length (12", 18") Finish (Black standard) Power Supply (PS-8W, PS-21W, PS-60W) ENERGY STAR (es 1 ) 1 ENERGY STAR qualified with 8W power supply. W W W. F I N E L I T E. C O M 155

119 Edge by Finelite Edge by Finelite delivers the right amount of task illumination for a fraction of the energy required by conventional undercabinet luminaires. Available in three different sizes, Edge by Finelite can be used as a stand alone unit, daisy chained or in conjunction with Finelite LED desk lamps. Use it to create pleasant and sustainable work areas that allow for true occupant control. 156 W W W. F I N E L I T E. C O M

120 Project: SHI Location: Somerset, NJ Architect: Cornerstone Architectural Group. LLC Product: PLS/Edge LED undercabinet, Series 12-ID Representative: Liberty Lighting W W W. F I N E L I T E. C O M 157

121 Edge by Finelite Dimensions / Lamping Feature Spotlight 1-7/8" Light engine Edge uses mid-powered LEDs spaced uniformly for even distribution on the task plane. 7/8" 45-1/ Off On On-Board Dimming Edge comes equipped with individual dimming to off on each luminaire. 22-1/ Specifications 12-1/ Diffuser Frosted diffuser covers the LEDs for improved distribution, minimizes multiple shadow effects, and is easy to clean for applications requiring periodic wipe down. Buy American Act of 2009 Compliant Efficacy (Lumens per Watt): 45": / 22": 62.2 / 12": 48.9 Light Output (Lumens): 45": / 22": 380 / 12": 196 Power Consumption: 45": 12.2W 1 / 22": 6.1W / 12": 4W Color Temperature: 3500K Color Rendering (CRI): 87 R9 Value: 22": 32 / 12": 34 L 90 : Rated for 100,000 hours to 90% of initial lumens " performace is projected. 2 L 90 lifetime is estimated by the LED manufacturer based on independent testing of the Edge luminaire. Photometric Performance Power Supply LM-79 tested and LM-80 data is available Complies with FCC requirements for commercial and residential use Compatible with Personal Lighting System (PLS) End of life statement: 86% recyclable at the end of its useful life ETL Listed RoHS compliant Cables PS Superior lateral throw provides proper illumination over a wide area. Example below: 22" unit installed on a 4' binder bin. 21W & 60W 8W Edge by Finelite comes standard with (1) 12' power cable and cable management hardware. Patch Cables 60 FC 45 FC 30 FC 15 FC Available with 8W, 21W, or 60W power supplies. 21W and 60W power supplies include (4) 2.5 MM output jacks and one RJ11 jack for an optional occupancy sensor. 8W power supply includes (1) 2.5 mm output jack. Edge is ENERGY STAR qualified when using one 22" unit or two 12" units on an 8W power supply. (Refer to Power Supply Tech Sheet for more information.) Power Cables Splitter Cable Occupancy Sensor Optional occupancy sensor available for use with 21W or 60W power supply. extension Cable Refer to the Finelite website for additional photometry and product information. 158 W W W. F I N E L I T E. C O M

122 Edge by Finelite Project: Pivot Interiors Location: Pleasanton, CA Architect: Huntsman Architectural Group Product: PLS/Curve LED desk lamp, Edge LED undercabinet, Series 16 Representative: Associated Lighting Representatives energy STaR QuaLifieD WiTH following CONfiGuRaTiONS es1 Two 12" units on an 8W power supply only + es2 OR One 22" unit on an 8W power supply only + Ordering Guide UC-E 22" S PS-21W OCC ES2 Lamp (uc-e) Length (12", 22", 45" 1 ) Finish (Silver) Power Supply (PS-8W, PS-21W, PS-60W) Occupancy Sensor (OCC) 3 ENERGY STAR (es1, es2) " can use 21W or 60W power supply. 2 Edge is ENERGY STAR qualified when using two 12" units (ES1) or one 22" (ES2) unit on an 8W power supply. 3 OCC sensor available for PS-21W & PS-60W only. W W W. F I N E L I T E. C O M 159

123 Muro Breakthrough LED Performance Muro is the first luminaire to use high performance energy efficient LED T8 lamp technology. Clean, beautiful extruded aluminum forms position the LED T8 light engine to deliver vertical illumination for interior applications. 160 W W W. F I N E L I T E. C O M

124 W W W. F I N E L I T E. C O M 161

125 Muro-Oval Feature Spotlight Dimensions / Lamping 1-1/2" Specifications 2-1/ CONSTRuCTiON: 6063-T6 extruded aluminum body with plug-together wiring standard. Wire enclosure brackets constructed of 16 gauge steel. endcaps: (FE) Flat endcap, aluminum die-cast endcap 1/8" at each end. RefLeCTORS: Gloss white 96% reflective. electrical: 120V or 277V prewired. Luminaire and electrical components are ETL listed and ETL labeled. feed: 18 gauge straight cord standard. LiGHT engine: See tech sheet for lumens output. LED T8 module with integrated internal driver. PHOTOMeTRY Efficacy: 82 lumen per watt Total luminaire output: lumens (367.7 lumens/foot) 18 watts (4.5 watts/foot) Peak Candela Value: 55º 127 CCT: 4000K 255 Source Report ITL (Family Correlation) 382 CANDELA DISTRIBUTION Flux LeD MODuLe Muro utilizes an optimized LED T8 module with internal driver that is powered directly by standard 120V - 277V. LED and driver module can be replaced as easily as a standard fluorescent lamp at end of useful life. Run Length (Independant Pendant Luminaires*) 29-1/ 2ft. Nominal Length 4ft. Nominal Length 53-1/ adjustable MOuNTiNG Mounting points adjust along the entire length of the luminaire for added installation flexibility. Standard with fully adjustable cables. MOuNTiNG: (FA) 50" fully adjustable aircraft cable standard with safety stop. Contact factory for additional lengths up to 150". Flexible mounting bracket adjusts along the length of the luminaire to accommodate existing mounting points. Optional: (WM) Wall Mounted Stem bracket mounts directly to wall j- box, extends luminaire 18" from wall. Other lengths available. Consult factory. SuPPORT CaBLeS: Plated steel cable and hardware. finishes: Finelite Signal White powder coat finish standard. Optional adders: Custom color available for housing and endcaps. Contact factory. LeNGTHS: 2', 4', and 8' section lengths can be combined to make longer runs. Contact factory for additional lengths /2" 8ft. Nominal Length Note: Overall lengths include 1/8" thick at endcaps on each. *Add 3-3/ to lengths above for stem mounting. Endcaps (FE) Flat endcap, aluminum die-cast endcap 1/8" at each end. Wall Mount Optional (show with 18" stems) Refer to the Finelite website for additional photometry and product information. 162 W W W. F I N E L I T E. C O M

126 Muro-Circle Feature Spotlight Dimensions / Lamping 2-1/8" Specifications 2-1/8" CONSTRuCTiON: 6063-T6 extruded aluminum body with plug-together wiring standard. Brackets constructed of 16 gauge steel. endcaps: (FE) Flat endcap, 10 GA steel endcap 1/8" at each end. RefLeCTORS: Reflector is die-formed 25-gauge Alanod 8516GP semispecular aluminum with 94% high reflectance finish. electrical: 120V or 277V prewired. Luminaire and electrical components are ETL listed and ETL labeled. feed: 18 gauge straight cord standard. LiGHT engine: See tech sheet for lumens output. LED T8 module with integrated internal driver. LeD MODuLe Muro utilizes an optimized LED T8 module with internal driver that is powered directly by standard 120V - 277V. LED and driver module can be replaced as easily as a standard fluorescent lamp at end of useful life. adjustable MOuNTiNG Mounting points adjust along the entire length of the luminaire for added installation flexibility. Standard with fully adjustable cables. MOuNTiNG: (FA) 50" fully adjustable aircraft cable standard with safety stop. Contact factory for additional lengths up to 150". Flexible mounting bracket adjusts along the length of the luminaire to accommodate existing mounting points. Optional: (WM) Wall Mounted Stem bracket mounts directly to wall j- box, extends luminaire 18" from wall. Other lengths available. Consult factory. SuPPORT CaBLeS: Plated steel cable and hardware. finishes: Finelite Signal White powder coat finish standard. Optional adders: Custom color available for housing and endcaps. Contact factory. LeNGTHS: 2 ft., 4 ft., and 8 ft. section lengths can be combined to make longer runs. Contact factory for additional lengths. Wall Mount Optional (show with 18 stems) Run Length (Independant Pendant Luminaires*) 29-1/ 2 ft. Nominal Length 53-1/ 4 ft. Nominal Length 104-1/2" 8 ft. Nominal Length Note: Overall lengths include 1/8" thick at endcaps on each. *Add 3-3/ to lengths above for stem mounting. Endcaps (FE) Flat endcap, 10 GA steel endcap 1/8" at each end. W W W. F I N E L I T E. C O M 163

127 Muro-Square Feature Spotlight Dimensions / Lamping 2" Specifications 2" CONSTRuCTiON: 6063-T6 extruded aluminum body with plug-together wiring standard. Brackets constructed of 16 gauge steel. endcaps: (FE) Flat endcap, 10 GA steel endcap 1/8" at each end. RefLeCTORS: Reflector is die-formed 25-gauge Alanod 8516GP semispecular aluminum with 94% high reflectance finish. electrical: 120V or 277V prewired. Luminaire and electrical components are ETL listed and ETL labeled. feed: 18 gauge straight cord standard. LiGHT engine: See tech sheet for lumens output. LED T8 module with integrated internal driver. LeD MODuLe Muro utilizes an optimized LED T8 module with internal driver that is powered directly by standard 120V - 277V. LED and driver module can be replaced as easily as a standard fluorescent lamp at end of useful life. adjustable MOuNTiNG Mounting points adjust along the entire length of the luminaire for added installation flexibility. Standard with fully adjustable cables. MOuNTiNG: (FA) 50" fully adjustable aircraft cable standard with safety stop. Contact factory for additional lengths up to 150". Flexible mounting bracket adjusts along the length of the luminaire to accommodate existing mounting points. Optional: (WM) Wall Mounted Stem bracket mounts directly to wall j-box, extends luminaire 18" from wall. Other lengths available. Consult factory. SuPPORT CaBLeS: Plated steel cable and hardware. finishes: Finelite Signal White powder coat finish standard. Optional adders: Custom color available for housing and endcaps. Contact factory. LeNGTHS: 2 ft., 4 ft., and 8 ft. section lengths can be combined to make longer runs. Contact factory for additional lengths. Wall Mount Optional (show with 18" stems) Run Length (Independant Pendant Luminaires*) 29-1/ 2ft Nominal Length 53-1/ 4 ft. Nominal Length 104-1/2" 8 ft. Nominal Length Note: Overall lengths include 1/8" thick at endcaps on each. *Add 3-3/ to lengths above for stem mounting. Endcaps (FE) Flat endcap, 10 GA steel endcap 1/8" at each end. 164 W W W. F I N E L I T E. C O M

128 Muro Muro shapes Muro-Oval Muro-Circle Muro-Square Ordering Guide MU-O 16' LED T8 3500K SC 277 FA FE Finelite Series: Muro-O (Mu-O), Muro-C (Mu-C), Muro-S (Mu-S) Length (2', 4', 8', multiples standard) Light Engine (LeD T8) Color Temp (3000K, 3500K, 4000K, 5000K) Circuiting (SC - Single Circuit) Voltage (120V, 277V) Mounting (fa - Fully Adjustable, WM - Wall Mount) Endcap Flat (fe) W W W. F I N E L I T E. C O M 165