Tooling, Screws and Consumables

Tooling, Screws and Consumables

Contents Glass Gluing Fittings Glass door pivot hinge, external pivot Glass door hinge Glass shelf support with rubber pad Furniture knob Adapter for furniture castor/rondella table leg Cable outlet two-piece CAM Cam lock for glass doors for all-glass constructions Barrel bolt Tooling Edge bander KA 65 Plus 230 V Module edge router B MKF 700 EQ-Plus 230 240 V Vacuum pump and clamping unit Cordless haer drill BHC 18 Oscillator OS 400 EQ-Set 230 V Pendulum cut saw TSC 55 REB-Plus/XL-FS Li cordless Hard wax trend colours/retouching pen Measurement tape/fixing clamp FF.2

Table and Furniture Base Fittings Contents Folding hex key set Twist open utility knife Pliers/wrenches Claw haer/screwdriver Universal magnetic holder Bit-Box with 10 Bits Hotmelt Screws and Consumables Self tapping screws with counter sunk head HOSPA Chipboard screw HOSPA Pan head chipboard screw VARIANTA Special screws Screw with M4 thread/wing nut/washer Cover cap Glue-in sleeve/dowel Spreeding sleeve/expanding dowel Screw-in sleeve/sleeve inserter Hanger/plastic dowel Threaded rod DIN 975/hexagon nut DIN 934 FF.3

Glass Gluing Fittings Glass door pivot hinge, external pivot, opening angle 210 Material: Stainless steel Finish: Matt For glass thickness: 6 12 For all-glass constructions For glass/wood constructions For all-glass constructions, for inset doors Installation: For glue fixing (UV glass adhesive bonds) Load bearing capacity: Max. 10 kg per pair Bonding surface on door 20 x 20 361.51.040 30 x 30 361.51.050 : 1 pair For glass and wood constructions, for inset doors Installation: For glue fixing onto doors (UV glass adhesive bonds), for screw fixing with Euro screws at cabinets Load bearing capacity: Max. 20 kg per pair Bonding surface on door : 1 pair 20 x 20 361.61.040 30 x 30 361.61.050 FF.4

Glass Gluing Fittings Glass door hinge for glue fixing with exposed axle Area of application: For inset doors Version: With exposed axle, with spring For glass thickness: Max. 10 Opening angle depends on glass thickness For all-glass constructions Glass thickness A Min. chamfer B For glass/wood constructions 4 5 6 7 8 10 1x45 o 2x45 o 3x45 o 4x45 o 6x45 o Number of hinges per door Sample measurements for 8 thick glass Hinge distance min. 500 Door width up to 600 The door's width should not exceed it s height For all-glass constructions Adjustment facility: Side adjustment +2, height adjustment ±2, depth adjustment ±2 Opening angle: Up to 220 Installation: For glue fixing (UV glass adhesive bonds) Gluing diagram for cabinet side panel Gluing diagram for door 3-dimensionally adjustable for door alignment with millimetre accuracy. ±2 ±2 ±2 Supplied with 1 Glass door hinge for glue fixing 1 Set of installation instructions Material/finish Stainless steel matt 344.88.070 FF.5

Glass Gluing Fittings Glass shelf support with rubber pad Material: Stainless steel Finish: Matt Installation: Gluing (UV glass adhesive bonds) Note: Not suitable for laminated glass Load bearing capacity kg/pc. : 1 or 4 pcs. 10 281.60.000 Furniture knob Area of application: For mirror doors Material: Stainless steel Finish: Matt Installation: Gluing (UV glass adhesive bonds) Not suitable for laminated glass Diameter 10 3.61.000 Diameter 16 3.62.000 FF.6

Glass Gluing Fittings Adapter For furniture castors with M8 threaded bolt M8 Material: Stainless steel Finish: Matt Installation: Gluing (UV glass adhesive bonds) Not suitable for laminated glass For thread M8 660.79.008 For RONDELLA Table leg Version: Wiith M10 x 25 steel threaded bolt, black Material: Stainless steel mounting plate Finish: Mounting plate matt Diameter For tabel leg diameter 65 60 635.06.052 Cable outlet two-piece, round For drilled hole Ø: 50 Installation: Gluing (UV adhesive bonds) also for gluing to wood Note: Not suitable for laminated glass Ø Material/finish Stainless steel matt 631.34.001 FF.7

Glass Gluing Fittings CAM Cam lock for glass doors, for all-glass constructions Single door Material: Stainless steel Finish: Matt ground Locking travel: 180 (locking not necessary) Locking type: Plate cylinder Key changes: 200 different key changes possible Installation: Gluing (UV glass adhesive bonds) Note: Not suitable for laminated glass For glass thickness: Max. 12 Version Different key changes 233.47.000 Installation Keyed alike (Key change SG 1) 233.47.001 Overlay mounting Double door Inset mounting Drilling pattern Drilling pattern For glass thickness: Max. 15 Version Different key changes Keyed alike (Key change SG 1) 233.47.040 233.47.041 FF.8

Glass Gluing Fittings Barrel bolt Area of application: For all-glass constructions or glass and wood constructions Material: Stainless steel Finish: Matt Note: Not suitable for laminated glass For all-glass constructions Installation Gluing (UV glass adhesive bonds) 252.80.001 For glass and wood constructions Installation Gluing (UV glass adhesive bonds), press fitting into Ø8.5 drilling Ø 252.80.011 FF.9

Tooling Edge bander KA 65 Plus 230 V Version Complete with guide table, 4x natural EVA adhesive, in a SYSTAINER SYS 4 TL Cat.No 00F.57.46 Natural EVA adhesive Height: 26 Processing temperature 190 o Colour Natural White : 48 pcs. Diameter Cat.No 63 00F.49.9812 00F.49.98 Module edge router B MKF 700 EQ-Plus 230 240 V Version Ball bearing guide brake, in Systainer 2 T-LOC Cat.No 00F.57.4453 Vacuum pump and clamping unit Workpieces can be turned up to 360 o and swiveled up to 90 o Sensitive surfaces can be clamped without damaging them 4 different vacuum plate sizes, can be changed without tools Version Extendable for large workpieces by clamping unit : 1 set Cat.No 00F.71.2223 FF.10

Tooling Cordless haer drill BHC 18 Unbeatable power to weight ratio thanks to the combination of EC-TEC motor Vibration damping for effortless work; maximum working comfort in all work situations Brushless EC-TEC motor with integrated motor management for long service life and the highest output Version High-quality lithium-ion battery technology for the longest sustained usage Cat.No 00F.56.4504 Oscillator OS 400 EQ-Set 230 V Version Wood saw blade HSB 50/35/J and HSB 100/HSC, universal saw blade USB 78/32/Bi, 4 m plug-it cable in a SYSTAINER with lid compartment SYS 2 TL-DF, positioning aid and depth stop in SET OS-AH/TA : 1 set Pendulum cut saw TSC 55 REB-Plus/XL-FS Li cordless Version 2 nd lithium-ion battery pack 4.2 Ah, 2 nd charger TCL 3, HW fine tooth saw blade W48, chip collection bag, splinterguard, viewing window, operating tool, guide rail FS 1400/2, in a SYSTAINER SYS 5 T-LO Cat.No 00F.56.3001 Cat.No 00F.56.1700 FF.11

Tooling Hard wax trend colours Area of application: For repairs and correction of wood surfaces whith heavy duty Colour: Different wood colours Contents: 20 bars Light resistant and recoatable Hard wax trend colours : 1 set 007.31.002 Set consists of 1 pen each: Ash Ash, nature Cremewhite Oak, medium Alder, brown Larch Limba, light Pine, antique Cherry, reddish Beech, light Beech Oak, nature Birch Alder Oak, dark Oak, nature Cherry Oak, light Oak, rustic light Cherry, medium Battery smelter Supplied with 1 Melting device 2 Batteries AA 1 Installation manual Area of application For processing of hard wax : 1 set 007.31.090 FF.12

Tooling Häfele Fine-Liner Retouching pen lack Glaze retouching pen Area of application: Especially suitable for the repair in kitchen and bathroom Version: Rounded tip, especially suitable for opaque apply Colour White Silver coloured Touch-up pencil 007.33.100 007.33.101 Colour: Different wood colours Contents: 12 pens Set consists of 1 each pen: Maple/Birch/Ash Mahogany, reddish Beech, nature Walnut, light Oak, rustic Walnut, dark Cherry, light Elm, light Cherry, nature Teak Area of application: For laminating the cut surface of silver coloured profile handles Specially adapted to silver-colored aluminum profiles Colour Aluminium coloured 007.33.062 Area of application For repairs and correction of wood surfaces : 1 set 007.33.012 FF.

Tooling Measurement tape The black magnetic movable hook, measures both internal and external diameters Steel durable blade with special coating Easy reading graduation, smooth pulling and recoiling Rubber gripping prevents to slip and comfortable in use Size /L m 16 x 2 002.81.150 16 x 3 002.81.151 19 x 5 002.81.152 Klick clamp Lightweight and easy to use Clamping pressure quickly applied through use of lever ratchet Opening width x depth 160 x 80 003.71.102 FF.14

Tooling Heavy duty screw clamp Span 50/100 003.70.501 100/200 003.70.502 80/160 003.70.503 100/200 003.70.504 120/240 003.70.505 100/250 003.70.521 120/400 003.70.526 120/600 003.70.528 120/800 003.70.529 140/300 003.70.506 175/400 003.70.507 DIY Screw clamp Span 50/100 003.70.422 50/200 003.70.424 50/300 003.70.426 100/200 003.70.431 100/300 003.70.433 100/400 003.70.434 100/600 003.70.436 100/800 003.70.437 50/150 003.70.441 FF.15

Tooling Folding hex key set (8 in 1) Highly corrosion resistance for longer life and durability Rubber grip handle for comfortable usage 8 pcs. set in metric 1.5, 2, 2.5, 3, 4, 5, 6 and 8 Material: Drop forged CR-V (Chrome vanadium) steel Finish: Chrome plated Size/L 1.5 8 006.28.414 Twist open utility knife Precision die cast zine body Rubber grip handle for comfortable usage Fixed blade system Available with 3 blades stored Material: Zinc alloy Finish: Chrome plated Size/L 150 000.33.185 FF.16

Tooling Straight jaw locking plier Highly corrosion resistance for longer life and durability Serrated jaw for better grip Comfort grip handle Meet ANSI standard Material: Drop forged CR-V (Chrome vanadium) steel Finish: Chrome plated Size/L 10 /254 006.11.580 Adjustable wrenches Highly corrosion resistance for longer life and durability Comfort grip handle With metric scale bar Meet ANSI standard Material: Drop forged CR-V (Chrome vanadium) steel Finish: Chrome plated Size/L 6 /152 008.22.411 8 /203 008.22.412 10 /254 008.22.4 FF.17

Tooling Groove joint pliers Highly corrosion resistance for longer life and durability High grade plastic material for comfort grip handle Meet ANSI standard Material: Drop forged CR-V (Chrome vanadium) steel Finish: Chrome plated Size/L 10 /254 006.11.581 Linesman pliers Highly corrosion resistance for longer life and durability Heat treated, fully polished High grade plastic material for comfort grip handle Meet ANSI standard Material: Drop forged CR-V (Chrome vanadium) steel Finish: Chrome plated Size/L 7 /178 006.11.187 8 /203 006.11.188 FF.18

Tooling Long nose pliers Highly corrosion resistance for longer life and durability Heat treated, fully polished High grade plastic material for comfort grip handle Meet ANSI standard Material: Drop forged CR-V (Chrome vanadium) steel Finish: Chrome plated Size/L 6 /152 006.12.040 8 /203 006.12.041 Diagonal pliers Highly corrosion resistance for longer life and durability Heat treated, fully polished High grade plastic material for comfort grip handle Meet ANSI standard Material: Drop forged CR-V (Chrome vanadium) steel Finish: Chrome plated Size/L 6 /152 006..463 FF.19

Tooling Claw haer with fiberglass handle Material: Drop forged carbor steel Full heat-treted & poliished face Fiberglass handle absorbs shocks and vibration Textured rubber ensured a comfortable secure grip Maintenance by proper lubricating oil Size/L 16oz/290 006.00.110 Claw haer handwood handel Material: Drop forged carbor steel Full heat-treted & fully poliished Strong hardwood handle construction Maintenance by proper lubricating oil Size/L 16oz/290 006.00.120 FF.20

Tooling Magnetic Phillips & slotted screwdriver Highly corrosion resistance for longer life and durabillity High grade plastic materic for comfort handle Material: CR-V steel shaft Finish: Chrome plated Black magnetic tips Maintenance by proper lubricating oil Description Phillips screwdriver Slotted screwdriver Version Size/L PH2 x 150 006.28.525 4 x 100 006.28.535 Multi function pliers Supplied with Long nose pliers, regular pliers, wire cutter, wire stripper, nail file, can opener, medium slotted screw driver, large slotted screw driver, phillips screw driver, bottle opener, serrated knife and sharp knife,,,,,,,, Material: Stainless steel components, aluminium handle with plastic grip Foldable and light weight, easy to carry High sleek polish with spring loaded pliers Tool lock mechanism enhanced safety by locking components into usage position Available with nylon bag Description Multi function pliers 006.17.006 FF.21

Tooling Universal magnetic holder With permanent magnet and holding ring Drive: 1/4 Bit holder: 1/4 Length 75 006.40.310 : 1 or 100 pcs. Bit-Box with 10 Bits Set consists of: 1 Universal magnetic holder 1 Bit flat 5,5 1 Bit flat 6,5 1 Bit PH1 1 Bit PH3 2 Bits PH2 1 Bit PZ1 1 Bit PZ3 2 Bit PZ2 Bit-Box with 10 Bits 006.37.090 FF.22

Tooling Hotmelt Application: Application: To be used on slow edgebanders with low application For automatic edgebanders, e.g. for edges made of veneer, temperature e.g. for PVC, paper and polyester edge resinated paper, melamine resins, PVC and ABS Also for softforming with thermo-sensitive PVC edges Medium melt viscosity, fast melting and good feed Low viscosity; fast melting properties; long open time; properties after initial melting good color stability; good resistance to oxidation in the melt Good adhesion; high oxidation and color stability in the melt Technical data: Technical data: Application temperature: 0 150 C Application temperature: 190 210 C Feed speed: 5 20 m/min. Feed speed: Roller application 18 60 m/min Density: 1.40 g/cm³ Nozzle application: 12 25 m/min Appearance: Beige Density: 1.45 g/cm³ Softening range: 75 C (Kofler cover), 95 C (ring and ball) Appearance: Beige ³ Version Hotmelt F manual edgebanders machine : 25 kg 003.28.21J Softening range: 90 C (Kofler cover) ³ Version Hotmelt S softform edgebanders machine : 25 kg 003.28.40J FF.23

Screws and Consumables Self tapping screw with counter sunk head Drive: Cross recess PH Finish: Nickel plated Size Qty/box #4x1/2 1,000 028.03.001 #4x5/8 1,000 028.03.002 #4x3/4 1,000 028.03.003 #4x7/8 1,000 028.03.008 #4x1 1,000 028.03.005 #4x1-1/4 1,000 028.03.006 #4x1-1/2 1,000 028.03.007 #6x1/2 1,000 028.03.015 #6x5/8 1,000 028.03.016 #6x3/4 1,000 028.03.017 #6x7/8 1,000 028.03.018 #6x1 1,000 028.03.019 #6x1-1/4 1,000 028.03.020 #6x1-1/2 1,000 028.03.021 #6x1-3/4 1,000 028.03.023 #6x2 1,000 028.03.024 #7x1-1/2 500 028.03.030 #7x5/8 500 028.03.031 #7x3/4 500 028.03.032 #7x7/8 500 028.03.033 #7x1 500 028.03.034 #7x1-1/4/ 500 028.03.035 #7x1-1/2 500 028.03.036 #7x1-3/4 500 028.03.038 #7x2 500 028.03.039 #8x5/8 500 028.03.055 #8x3/4 500 028.03.056 #8x1 500 028.03.057 #8x1-1/4 500 028.03.058 #8x1-1/2 500 028.03.059 #8x1-3/4 500 028.03.061 #8x2 500 028.03.062 #10x3/4 500 028.03.070 #10x1 500 028.03.071 #10x1-1/4 500 028.03.072 #10x1-1/2 500 028.03.073 #10x1-3/4 500 028.03.075 #10x2 500 028.03.076 Thread Ød Ø Head Ødk Ø Head height k Cross recess m Drive 3.0 6 2.95 3.20 PZ 1 3.5 7 3.50 4.30 PZ 2 4.0 8 4.10 4.60 4.5 9 4.60 5.10 5.0 10 5.10 5.40 FF.24

Screws and Consumables Hospa Chipboard screw with counter sunk head Drive: Cross recess PH Thread: Fully threaded Thread Ød Ø Length L /Box / Bulk pack Galvanized 3.0 1,000 24,000 015.90.052 15 015.90.053 17 015.90.055 20 16,000 015.90.056 25 12,000 015.90.059 30 8,000 015.90.061 35 6,000 015.90.063 40 500 6,000 015.90.064 3.5 1,000 24,000 015.90.080 15 16,000 015.90.081 17 015.90.085 20 12,000 015.90.086 25 8,000 015.90.089 30 015.90.091 35 6,000 015.90.093 40 500 4,000 015.90.094 45 015.90.095 50 3,000 015.90.096 4.0 1,000 16,000 015.90.112 15 015.90.1 17 12,000 015.90.115 20 015.90.116 25 8,000 015.90.119 30 015.90.120 35 500 4,000 015.90.123 40 015.90.124 45 3,000 015.90.125 50 015.90.126 55 200 2,400 015.90.127 4.5 17 1,000 12,000 015.90.145 20 8,000 015.90.146 25 6,000 015.90.149 30 015.90.151 35 500 4,000 015.90.153 40 015.90.154 45 3,000 015.90.155 50 200 2,400 015.90.156 55 1,600 015.90.157 5.0 20 1,000 8,000 015.90.176 25 6,000 015.90.179 30 500 4,000 015.90.181 35 015.90.183 40 3,000 015.90.184 45 200 2,400 015.90.185 50 1,600 015.90.186 55 015.90.187 Thread Ød Ø Head Ødk Ø Head height k Cross recess m Drive 3.0 6 2.95 3.20 PZ 1 3.5 7 3.50 4.30 PZ 2 4.0 8 4.10 4.60 4.5 9 4.60 5.10 5.0 10 5.10 5.40 FF.25

Screws and Consumables HOSPA Chipboard screw with countersunk head Thread Ød Ø Length L Galvanized 4.5 25 5,000 017.31.933 30 017.31.942 35 3,000 017.31.951 40 017.31.960 50 2,000 017.31.988 5.0 20 1,000 015.32.074 50 015.31.997 Drive: Cross recess PZ Thread: Fully threaded Thread Ød Ø Head Ødk Ø Head height k Cross recess m Drive 2.5 5.0 1.6 2.8 PZ1 3.0 5.0/6.0 1.8 3.0 3.5 7.0 2.1 4.0 PZ2 4.0 8.0 2.4 4.2 4.5 9.0 2.7 4.4 5.0 10.0 2.9 5.0 Thread Ø d Ø Length L Galvanized 2.5 16 10,000 017.31.255 3.0 (Head Ø6.0) 10,000 017.31.522 15 017.31.531 17 017.31.540 20 017.31.559 30 017.31.586 3.5 10,000 017.31.620 15 017.31.639 17 017.31.648 20 017.31.657 22 017.31.660 25 8,000 017.31.675 30 017.31.684 35 017.31.693 40 5,000 017.31.700 50 017.31.728 4.0 15 8,000 017.31.826 17 017.31.835 20 017.31.844 25 017.31.853 30 5,000 017.31.862 35 017.31.871 40 4,000 017.31.880 45 3,000 017.31.899 50 017.31.906 Drive: Cross recess PZ Thread: Partly threaded Thread Ød Ø Head Ødk Ø Thread Ød Ø Head thickness k Length L Cross recess m 4.0 8.0 2.5 4.2 PZ2 4.5 9.0 2.7 4.4 5.0 10.0 2.9 5.0 6.0 12.0 3.4 6.3 PZ3 Drive Galvanized 4.0 35 5,000 017.41.877 60 3,000 017.41.920 5.0 60 2,000 017.42.141 80 100 015.42.178 100 015.42.196 120 015.42.198 6.0 60 200 015.42.356 80 100 015.42.374 100 015.42.392 120 015.42.418 140 015.42.436 160 015.42.454 180 015.42.472 FF.26

Screws and Consumables HOSPA Chipboard screw with countersunk head Finish: Nickel plated Drive: Cross recess PZ Thread: Fully threaded Stainless steel 304 Material: Stainless steel 304 Drive: Cross recess PZ Thread: Fully threaded Thread Ød Ø Head Ødk Ø Thread Ød Ø Head thickness k Length L Cross recess m 3.0 6.0 1.50 3.0 PZ1 3.5 7.0 1.75 4.0 PZ2 4.0 8.0 2.00 4.2 PZ2 4.5 9.0 2.25 4.4 PZ2 Drive 3.0 16 500 014.70.542 25 1,000 014.70.570 30 1,000 014.70.580 35 1,000 014.70.590 3.5 20 500 014.70.659 25 500 014.70.677 30 500 014.70.686 35 1,000 014.70.690 40 1,000 014.70.702 4.0 25 500 014.70.855 30 500 014.70.864 35 500 014.70.873 40 500 014.70.882 45 500 014.70.891 50 500 014.70.908 4.5 35 5 00 014.70.956 40 200 014.70.958 45 200 014.70.960 50 200 014.70.962 Thread Ød Ø Thread Ød Ø Head Ødk Ø Head height k Length L Cross recess m Drive 3.0 5.0 1.8 3.0 PZ1 3.5 7.0 2.1 4.0 PZ2 4.0 8.0 2.4 4.2 3.0 15 1,000 015.35.333 3.5 15 015.35.637 17 015.35.646 20 015.35.655 4.0 15 015.35.824 17 015.35.833 20 015.35.842 FF.27

Screws and Consumables HOSPA Chipboard screw, raised head HOSPA Pan head chipboard screw Thread: Fully threaded With cross recess Thread Ød Ø Head Ødk Ø Head height k Cross recess m Drive 3.0 6.0 1.8 3.0 PZ1 3.5 7.0 2.1 4.0 PZ2 4.0 8.0 2.4 4.2 Thread Ød Ø Length L Galvanized Nickel plated Burnished 3.0 1,000 015.51.524 15 17 015.51.542 20 015.55.559 25 015.55.577 30 015.55.586 3.5 15 1,000 015.51.631 015.55.639 17 015.51.640 015.55.648 015.59.646 20 015.51.659 015.55.657 25 015.51.677 015.55.675 30 015.51.686 015.55.684 35 015.51.695 015.55.693 4.0 17 1,000 015.51.837 20 015.51.846 015.55.844 25 015.51.855 015.55.853 30 015.51.864 015.55.862 35 500 015.51.873 015.55.871 40 015.51.882 015.55.880 Thread: Fully threaded With cross recess Thread Ød Ø Thread Ød Ø Head Ødk Ø Head height k Length L Cross recess m Drive 3.0 6.0 2.4 3.0 PZ1 3.5 7.0 2.5 4.0 PZ2 4.0 8.0 2.9 4.2 4.5 9.0 3.2 4.4 5.0 10.0 3.5 5.0 Galvanized 3.0 1,000 015.71.526 15 1,000 015.71.535 20 1,000 015.71.553 25 1,000 015.71.571 3.5 1,000 015.71.624 17 1,000 015.71.642 20 1,000 015.71.651 25 1,000 015.71.679 30 1,000 015.71.688 35 1,000 015.71.697 4.0 1,000 015.71.811 15 1,000 015.71.820 17 1,000 015.71.839 20 1,000 015.71.848 25 1,000 015.71.857 30 1,000 015.71.866 35 500 015.71.875 40 500 015.71.884 4.5 1,000 015.71.900 15 1,000 015.71.919 17 1,000 015.71.991 20 1,000 015.71.928 25 1,000 015.71.937 30 1,000 015.71.946 35 500 015.71.955 5.0 17 1,000 015.72.050 20 1,000 015.72.078 30 500 015.72.096 40 500 015.72.112 50 200 015.72.0 FF.28

Screws and Consumables HOSPA Chipboard screw with countersunk head Cover cap for central hole Ø2.5 Ø Thread: Fully threaded Central hole Ø2.5 Ø Thread Ød Ø Head Ødk Ø Head height k Cross recess m 4.5 9.0 2.7 5.0 PZ2 Thread Ød Ø Length L Drive Galvanized 4.5 25 1,000 015.01.935 30 015.01.944 35 500 015.01.953 40 015.01.962 45 015.01.971 50 200 015.01.980 60 015.01.981 70 015.01.982 80 015.01.983 5.0 80 015.01.992 Colour White, RAL 9010 Light grey, RAL 7035 Dark grey, RAL 7037 Black, RAL 9005 Pine coloured, RAL 1034 Beige, RAL 1015 Fawn coloured, RAL 8007 Cherry tree : 100 or 500 pcs. 045.04.705 045.04.509 045.04.527 045.04.303 045.04.009 045.04.401 045.04.107 045.04.620 FF.29

Screws and Consumables Chipboard screw with countersunk head Version: With routered ribs Material: Hardened steel Drive: T-star TS Thread: Chipboard screws partially threaded with drilling point Area of application: Pre-drilling not required, particularly suitable for MDF boards, coated and non-coated chipboard, hard wood and solid wood corner connections, front edge fixing Thread Ød Ø Head Ødk Ø Drive 4,0 8 TS20 4,5 9 TS20 5,0 10 TS25 Thread Ød Ø Length L Dim. A Galvanized 4 25 19 1,000 019.01.900 30 20 019.01.901 35 25 019.01.902 40 30 500 019.01.903 45 30 019.01.904 50 35 019.01.905 70 40 200 019.01.908 4.5 45 20 500 019.01.922 50 25 019.01.923 60 30 200 019.01.924 5 50 30 500 019.01.941 70 35 200 019.01.943 80 40 019.01.944 FF.30

Screws and Consumables VARIANTA Special screw with countersunk head for cruciform mounting plates, TAB and TAB V shelf connector, KEKU fitting and SOLO 32 carcase connector For Ø3 drillings in wood cross recess drive PZ2 Ø For Ø5 drillings in wood cross recess drive PZ2 Ø Thread: 2.0 pitch, thread Ø4.2, shaft Ø2.8 Screwing into wood and aluminium Ø Ø Nominal length L Nickel plated 10.5 100 or 1,000 0.15.617.5 0.15.626 16.0 0.15.635 Thread: 2.2 pitch, thread Ø6.2, shaft Ø4.6 Screwing into wood and aluminium Ø Ø Nominal length L Nickel plated Galvanized 10.5 100 or 1,000 0.20.716 0.20.912.5 0.20.734 0.20.930 16.0 0.20.743 0.20.949 For Ø5 drillings in wood cross recess drive PZ2 Ø Thread: 2.2 pitch, thread Ø6.2, shaft Ø4.6 Screwing into wood and aluminium Ø Ø Nominal length L Nickel plated 10.5 100 or 5,000 012.15.715.5 012.15.724 16.0 012.15.733 FF.31

Screws and Consumables VARIANTA Special screw with countersunk head for roller guided drawer runners Screwing into wood and aluminium For Ø3 drillings in wood, cross recess drive PZ2 Ø Thread: 2.0 pitch, thread Ø4.2, shaft Ø2.8 Ø Ø Nominal length L Galvanized 10.5 100 or 5,000 012.14.810.5 012.14.820 Screw with M4 thread Drive: PZ2 cross slot and longitudinal slot Length L Galvanized 15 100 or 1,000 022.45.154 20 022.45.207 22 022.45.225 25 022.45.252 27 022.45.270 30 022.45.305 35 022.45.350 40 022.45.403 45 022.45.458 60 022.45.609 For Ø5 drillings in wood, cross recess drive PZ2, T-star recess TS20 Ø Drive: PZ2 cross slot and longitudinal slot Thread: 2.2 pitch, thread Ø6.0, shaft Ø4.6 Ø Ø Nominal length L Galvanized 8.0 100 or 8,000 012.14.908 10.5 100 or 5,000 012.14.910.5 012.14.920 Length L Nickel plated 15 100 or 1,000 022.44.157 25 022.44.255 30 022.44.308 FF.32

Screws and Consumables Wing nut Washer DIN 9021 American shape (similar DIN 315) Thread d Dim. B Dim. H M4 18.0 9.0 3.2 M5 21.0 3.5 M6 24.0 11.0 4.0 M8 28.0 14.0 5.0 Dim. h Inner Ø Ø Outer Ø Ø Thickness Galvanized 5.3 15.0 1.2 250 037.22.905 6.4 18.0 1.6 037.22.906 8.4 24.0 2.0 100 037.22.908 10.5 30.0 2.5 037.22.909.0 37.0 3.0 037.22.910 17.0 50.0 037.22.912 Thread d Galvanized M4 034.40.904 M5 034.40.905 M6 034.40.906 M8 034.40.908 Spring ring DIN 127 Washer DIN 125 Inner Ø Ø Outer Ø Ø Thickness Galvanized 3.2 7.0 0.5 250 037.20.903 4.3 9.0 0.8 037.20.904 5.3 10.0 1.0 037.20.905 6.4 12.5 1.6 037.20.906 8.4 16.0 037.20.908 10.5 20.0 2.0 037.20.910.0 24.0 2.5 100 037.20.912 Inner Ø Ø Outer Ø Ø Thickness Galvanized 5.1 9.2 1.2 250 037.81.905 6.1 11.8 1.6 037.81.906 8.1 14.8 2.0 037.81.908 10.2 18.1 2.5 037.81.910 FF.33

Screws and Consumables Plastic cover cap for chipboard screws with cross recess PZ For cross recess Colour PZ2 White, RAL 9010 045.03.726 Pine coloured, similar RAL 1034 045.03.020 Fawn coloured, RAL 8007 045.03.128 For cross recess PZ3 For cross recess PZ2 : 1,000 pcs. CAPFIX Cover cap Diameter 14 Diameter 18 Area of application: Covering screw heads or MINIFIX connectors Thickness: 0.9 Diameter: 14 or 18 Installation: Gluing (self adhesive) Covering screw heads Covering MINIFIX connectors Made of plastic Colour Diameter 14 White, RAL 9010 Black, RAL 9005 Light grey Beech wood structure Oak wood structure Pine wood structure : 52 or 1,040 pcs. 045.23.700 045.23.300 045.23.500 045.23.310 045.23.410 045.23.010 Colour Diameter 18 White, RAL 9010 Black, RAL 9005 Light grey Beech wood structure Oak wood structure Pine wood structure : 36 or 720 pcs. 045.25.700 045.25.300 045.25.500 045.25.310 045.25.410 045.25.010 FF.34

Screws and Consumables Made of real wood Can be sanded, stained and surface treated Material Material Diameter 14 Diameter 18 Maple 045.24.100 Maple 045.26.100 Oak 045.24.400 Oak 045.26.400 Ash 045.24.500 Ash 045.26.500 Pine 045.24.000 Pine 045.26.000 Cherrywood 045.24.600 Cherrywood 045.26.600 : 52 or 1040 pcs. : 36 or 720 pcs. Cover cap made of real wood Finish: Untreated Can be stained and surface treated Specified RAL colours are not binding and only for your guidance For chipboard screws with cross recess or T-star recess For recess PZ2 or TS15/20 : 100 pcs. Material Maple Beech vaporized Oak Ash Pine Cross recess PZ2 or T-star recess TS15/20 045.32.110 045.32.310 045.32.410 045.32.510 045.32.010 For recess PZ3 or TS25 : 100 pcs. Cross recess PZ3 or T-star recess TS25 Material Maple Beech vaporized 045.32.120 045.32.320 FF.35

Screws and Consumables For MINIFIX 12 and 15 connector housing Diameter Material 18 Maple 045.30.100 Diameter Material 17 Maple 045.29.100 Beech vaporized Oak 045.30.300 045.30.400 Beech vaporized 045.29.300 Ash 045.30.500 Oak 045.29.400 Pine 045.30.000 : 100 pcs. : 100 pcs. For cup drillings, for example Material Maple 045.31.100 Beech vaporized 045.31.300 Oak 045.31.400 Ash Pine : 1 or 100 pcs. 045.31.500 045.31.000 FF.36

Screws and Consumables Cover cap made of plastic, for pressing in drilled holes Colour White, RAL 9010 Light grey, RAL 7035 Sepia brown, RAL 8014 : 500 pcs. 045.20.702 045.20.502 045.20.102 Colour White, RAL 9010 Light grey, RAL 7035 : 500 pcs. 045.00.725 045.00.529 Colour White, RAL 9010 Light grey, RAL 7035 Black, RAL 9005 Fawn coloured, RAL 8007 : 500 pcs. 024.02.753 024.02.555 024.02.355 024.02.155 Colour White, RAL 9010 Light grey, RAL 7035 Black, RAL 9005 : 500 pcs. 045.00.743 045.00.540 045.00.341 Colour Fawn coloured, RAL 8007 White, RAL 9010 : 100, 500 pcs. Colour White, RAL 9010 Light grey, RAL 7035 Black, RAL 9005 Fawn coloured, RAL 8007 : 500 pcs. 045.00.158 045.00.759 045.00.789 045.00.580 045.00.387 045.00.181 Colour White, RAL 9010 Light grey, RAL 7035 Black, RAL 9005 Fawn coloured, RAL 8007 Dark brown, RAL 8014 : 500 pcs. Colour White, RAL 9010 Dark brown, RAL 8014 : 500 pcs. 045.00.734 045.00.534 045.00.332 045.00.234 045.00.6 045.00.760 045.00.160 FF.37

Screws and Consumables Cover cap made of plastic, for pressing in drilled holes Colour For drilled hole Ø 35 Ø White, RAL 9010 Fawn coloured, RAL 8007 Black, RAL 9005 : 100 or 1,000 pcs. 262.86.790 262.86.190 262.86.390 Material Beech, vaporized Pine Oak Maple Ash : 100 pcs. 045.33.360 045.33.060 045.33.460 045.33.160 045.33.560 Material Beech, vaporized Pine Oak Maple Ash : 100 pcs. 045.33.310 045.33.010 045.33.410 045.33.110 045.33.510 Material Beech, vaporized Pine Oak Maple Ash : 100 pcs. 045.33.370 045.33.070 045.33.470 045.33.170 045.33.570 Material Beech, vaporized Pine Oak Maple Ash : 100 pcs. 045.33.350 045.33.050 045.33.450 045.33.150 045.33.550 FF.38

Screws and Consumables Glue-in sleeve Material: Nylon Colour: Natural coloured For drilled hole Ø Ø Length L Drilled hole Ø Ø Interior thread M4 Exterior thread 8.0 8 8.5 100 or 1,000 039.33.140 10.0 8 8.5 100 or 5,000 039.33.042 10.0 10 11.0 100 or 1,000 039.33.239.0 10 11.0 100 or 1,000 039.33.033 Interior thread M6 9.2 10 11.0 100 or 1,000 039.33.364 11.0 8 8.5 100 or 5,000 039.33.462 11.0 10 11.0 100 or 5,000 039.33.266.0 10 11.0 100 or 5,000 039.33.060 Glue-in dowel, injection-moulded in strips of 20 For drilled hole Ø 10 Ø Material: Plastic Exterior thread: Ø11 Ø Interrior thread Length M6 039.34.067 : 20 or 1,000 pcs. Knurled sleeve For drilled hole Ø10 Ø Material: Plastic Interrior thread Length M6 18 262.76.700 : 100 or 1,000 pcs. FF.39

Screws and Consumables Spreading sleeve, nylon, for wood screws up to Ø4 thread With collar For drilled hole Ø5 Ø Colour Natural coloured : 1, 1,000 or 5,000 pcs. Length 7.5 042.97.001 Without collar For drilled hole Ø5 Ø Colour Natural coloured : 1, 100 or 1,000 pcs. Length 9.5 042.98.033 Injection-moulded in strips of 20 For drilled hole Ø5 Ø Colour Natural coloured : 5,000 pcs. Length 11 042.98.060 Injection-moulded in strips of 20 For drilled hole Ø5 Ø Injection-moulded in strips of 12, with internal thread M6 For drilled hole Ø10 Ø Colour Natural coloured : 1,000 or 5,000 pcs. Colour Natural coloured : 1,200 or 5,400 pcs. Length 12 042.98.051 Length 039.35.064 FF.40

Screws and Consumables Expanding dowel Internal thread M4 Screw-in sleeve Without flange For drilled hole Ø 5 Ø Core Ø Ø Head Ø Ø Material: Brass Finish: Bright Drive: Hexagonal socket Exterior Ø Ø Length 8 051.45.004 : 100, 1,000 or 3,000 pcs. Interior thread Exterior Ø Ø Core Ø Ø Head Ø Ø M4 8.0 6.0 8.0 SW4 M5 10.0 8.0 10.0 SW5 Hexagonal socket Internal thread M6 Interior thread Length L M4 10 100 or 2,000 030.07.042 M5 12 100 or 1,000 030.07.053 Material: Brass Finish: Bright Drilling depth: Min. 15 Design: Length 12 with nylon balls Length L For drilled hole Ø 8 Ø 9 039.00.267 12 039.00.061 : 100, 1,000 or 3,000 pcs. With flange Drive: Hexagonal socket Interior thread Interior thread Exterior Ø Ø Length L Core Ø Ø Exterior Ø Ø Core Ø Ø Head Ø Ø Head Ø Ø Hexagonal socket M6 10.0 7.5 12.0 SW6 M8 12.5 9.5 14.0 SW8 M10 15.3 11.5 17.0 SW10 Galvanized M6 100 or 1,000 030.10.863 24 100 or 2,000 030.10.867 M8 100 or 2,500 030.10.883 24 100 or 1,000 030.10.887 M10 20 100 or 1,000 030.10.906 25 100 or 500 030.10.907 Yellow chromatized M6 15 100 or 3,000 030.10.564 17 100 or 2,500 030.10.565 M8 15 100 or 2,000 030.10.584 17 030.10.585 FF.41

Screws and Consumables Screw-in sleeve with steel spring Sleeve inserter Area of application: Fort inserting screw-in sleeves with screwdriver slot Material: Zinc alloy Finish: Galvanized Drive: Hexagonal socket 12 Interior thread : 1 or 100 pcs. M8 030.11.008 Screw-in sleeve with screwdriver slot Finish: Bright Drive: Screwdriver slot Interior thread Length Core Ø Ø Exterior Ø Ø Core Ø Ø Length Exterior Ø Ø M4 8 8.0 5.5 100 or 1,000 030.00.100 M5 10 10.0 7.0 100 or 1,000 030.00.208 M6 10 12.0 9.0 100 or 1,000 030.00.306 12 10.0 7.0 100 or 1,000 030.00.351 12.0 9.0 100 or 1,000 030.00.315 15 12.0 9.0 100 or 1,000 030.00.324 M8 15 14.0 11.5 100 or 1,000 030.00.404 M10 15 18.5 15.0 100 or 500 030.00.502 Interior thread T-nut Sleeve Ø Ø Edge thickness Exterior Ø Ø M4 006.45.519 M5 006.45.529 M6 006.45.539 M8 006.45.549 M10 006.45.559 Interior thread Interior thread M4 M5 M6 M8 M10 Length L Finish Bright Galvanized Bright Galvanized Bright Galvanized Bright Galvanized Bright Galvanized Exterior Ø Ø Sleeve Ø Ø M4 7.2 15.0 5.2 0.8 M5 7.9 17.0 6.3 1.0 M6 7.9 19.1 7.7 1.1 M8 9.5 22.2 9.5 1.5 M10 11.1 25.4 11.5 1.6 Edge thickness 1,000 031.00.249 031.00.445 031.00.258 031.00.446 031.00.267 031.00.463 500 031.00.285 031.00.481 031.00.301 031.00.490 FF.42

Screws and Consumables Hanger For drill-in, with toothed hanging edge Screw hook Depth Interior Ø Ø Material: Plastic Colour: White Exterior Ø ø Interior Ø ø : 1, 100 or 1,000 pcs. Exterior Ø Ø Thickness Depth Thickness 20 16 8.5 2.0 290.50.720 30 27 11.5 2.5 290.50.730 Finish: Galvanized Drive: Cross recess PZ Length L Thread Ø D ø 50 5.2 057.05.905 65 5.8 057.05.906 80 057.05.908 100 057.05.910 : 1 or 100 pcs. For drill-in, with key-hole shape Fixing set Material: Plastic Colour: White Exterior Ø Ø : 1, 100 or 1,000 pcs. Exterior Ø Ø Depth Thickness Key-hole width Interior Ø Ø Key-hole width 20.0 9.0 5.0 30.0 10.0 7.5 Exterior Ø ø Interior Ø ø Depth Thickness Dim. X Dimension X 20 16 10.0 2.0 290.51.720 30 27 9.5 2.5 290.51.730 screw hook, plastic wall plug Length L Screw hook: 80 Wall plug: 60 Screw hook: 100 Wall plug: 80 : 1 or 50 pcs. Thread Ø D ø Screw hook: 5.8 051.47.042 051.47.052 FF.43

Screws and Consumables Hanger Screw hook Plastic dowel Finish: Galvanized Drive: Screwdriver slot Important: Min. 1x screw Ø Version Fully threaded : 1,100 or 100 pcs. 057.02.912 Material: Plastic Finish: White For drill-in, with heigth adjustment Heigth adjustement: ±3 with eccentric screw Material: Plastic housing, steel base plate Colour: Black Finish: Galvanized Installation: For press-in Area of application: For mirrors, panels, etc. ± Outer Ø ø : 1, 100 or 1,000 pcs. 35 290.53.000 Length L : 1 kg Drill ØD x depth T Ø Quanitity pcs/kg 26 6 x 36 2,200 051.16.002 33 7 x 43 1,400 051.16.003 36 8 x 46 900 051.16.004 46 10 x 56 600 051.16.005 FF.44

Screws and Consumables Hanger bolt Hexagon nuts DIN 934 Thread d Without drive Length L Drive Galvanized M4 20 500 026.10.901 30 026.10.902 40 026.10.903 50 026.10.904 With T-STAR Drive M6 50 TS15 100 026.12.923 80 026.12.926 90 026.12.927 M8 50 TS25 026.12.941 60 026.12.942 80 026.12.944 100 026.12.946 Thread d Dim. A Wrench size Galvanized M4 3.2 7 250 034.16.904 M5 4.0 8 034.16.905 M6 5.0 10 034.16.906 M8 6.5 034.16.908 M10 8.0 17 100 034.16.910 Hexagonal lock nut DIN 985 with plastic ring Threaded rod DIN 975 Thread: Fully threaded Thread d Galvanized M4 50 or 100 020.80.904 M5 020.80.905 M6 020.80.906 M8 25 or 50 020.80.908 M10 20 or 25 020.80.910 M12 10 or 25 020.80.912 M14 10 or 20 020.80.914 M16 10 020.80.916 Thread d Dim. A Dim. H Wrench size Galvanized M5 3.5 5.0 8 250 034.18.905 M6 4.5 6.0 10 034.18.906 FF.45